PREN 2600 : 200P1
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - DESIGNATION OF METALLIC SEMI-FINISHED PRODUCTS - RULES
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
18-05-1987
1 Scope and field of application
2 References
3 Designation scheme
Annex A
Annex B
Annex C
Annex D
Specifies the designation rules for semi-finished products, used in aerospace construction.
| Committee |
C6
|
| DocumentType |
Draft
|
| Pages |
24
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 2600:1989-09 (Draft) | Identical |
| XP PREN 3997 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T3 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| XP PREN 4004 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P3103- - H16 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| PREN 2299 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - TUBE |
| PREN 2657 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - BAR - A OR D <= 150 MM - R[M] >= 860 MPA |
| PREN 2770 : 200P1 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1050 <= R[M]<= 1220 MPA - SHEET AND PLATE - 0,5 <= A <= 12 MM |
| PREN 3348 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED AND ARTIFICIALLY AGED (T62) - PLATE - 6 <= A <= 50 MM |
| PREN 2590 : 200P1 | AEROSPACE SERIES - STEEL - SHEETS AND PLATES, HOT ROLLED - DIMENSIONS |
| PREN 3337 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T74511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3353 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - SOLUTION TREATED AND AGED - R[M] >= 1100 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| PREN 3466 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63001 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 150 MM |
| PREN 3499 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99003 - ANNEALED - SHEET AND STRIP, COLD ROLLED - A <= 6 MM - 570 MPA <= R[M] <= 730 MPA |
| PREN 3513 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 900 <= R[M] <= 1100 MPA - BAR AND WIRE - D[E] <= 45 MM |
| PREN 3461 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99003 - ANNEALED - BAR FOR MACHINING D <= 150 MM - 540 MPA <= R[M] <= 740 MPA |
| PREN 3504 : 200P2 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - CIRCULAR TUBES FOR FLUIDS - CLOSE TOLERANCES - DIAMETER 3.2 MM <= D <= 50 MM - THICKNESS 0.25 MM <= A <= 2 MM - DIMENSIONS |
| PREN 3514 : 200P1 | AEROSPACE SERIES - STEEL FE-PL711 - HARDENED AND TEMPERED - 1100 <= R[M] <= 1300 MPA - BAR AND WIRE FOR BOLTS - D[E] <= 25 MM |
| PREN 3551 : 200P2 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 90 MM |
| PREN 2616 : 200P1 | AEROSPACE SERIES - WIRE FOR RIVETS IN ALUMINIUM AND ALUMINIUM ALLOYS - LARGE TOLERANCES - D <= 10 MM - DIMENSIONS |
| PREN 2615 : 200P1 | AEROSPACE SERIES - WIRE TO CLOSE TOLERANCE IN ALUMINIUM AND ALUMINIUM ALLOYS - 1,6 <= D <= 9,6 MM - DIMENSIONS |
| PREN 4258 : 1995 | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| PREN 3892 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-W64001 - FILLER METAL FOR WELDING |
| PREN 3962 : 200P1 | AEROSPACE SERIES - GOLD BASE ALLOY AU-B40001 - FILLER METAL FOR BRAZING - WIRE |
| PREN 4180 : 200P1 | AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - CIRCULAR TUBES FOR FLUIDS - LARGE TOLERANCES - DIAMETER 4 MM <= D <= 40 MM - THICKNESS 0.4 MM <= A <= 2 MM - DIMENSIONS |
| PREN 3860 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - ANNEALED - SHEET AND STRIP, COLD ROLLED - A <= 6 MM |
| PREN 3859 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| PREN 3871 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - SOLUTION TREATED AND AGED - SHEET AND STRIP, COLD ROLLED - A <= 6 MM |
| PREN 3885 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3601 - FILLER METAL FOR WELDING |
| PREN 3894 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WD3201 - FILLER METAL FOR WELDING |
| PREN 3883 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH2301 - FILLER METAL FOR WELDING |
| PREN 3895 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3901 - FILLER METAL FOR WELDING |
| PREN 3932 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B13001 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3965 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-B17001 - FILLER METAL FOR BRAZING - ROLLED FOIL |
| PREN 3735 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65002 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 75 MM |
| PREN 3497 : 200P2 | AEROSPACE SERIES - TITANIUM TI-99001 - ANNEALED - SHEET AND STRIP, COLD ROLLED - A <= 6 MM - 290 MPA <= R[M] <= 420 MPA |
| PREN 3463 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 75 MM |
| PREN 3896 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1501 - FILLER METAL FOR WELDING |
| PREN 3897 : 200P1 | AEROSPACE SERIES - STEEL FE-WA4801 - FILLER METAL FOR WELDING |
| PREN 3952 : 200P1 | AEROSPACE SERIES - SILVER BASE ALLOY AG-B10001 - FILLER METAL FOR BRAZING - WIRE |
| PREN 3961 : 200P1 | AEROSPACE SERIES - GOLD BASE ALLOY AU-B40001 - FILLER METAL FOR BRAZING - ROLLED FOIL |
| PREN 3888 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1402 - FILLER METAL FOR WELDING |
| PREN 3964 : 200P1 | AEROSPACE SERIES - COPPER CU-BU9001 - FILLER METAL FOR BRAZING - WIRE |
| PREN 4045 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS - CAPILLARY TUBES, SEAMLESS - DIAMETER 0,6 MM <= D <= 2 MM - DIMENSIONS |
| DIN EN 2092:2006-10 | Aerospace series - Aluminium alloy AL-P7075-T6 or T62 - Clad sheet and strip - 0,4 mm <kleiner |
| BS EN 2589:2017 | Aerospace series. Steel. Sheet and strip, cold rolled. Thickness 0,1 mm ≤ a ≤ 3 mm. Dimensions |
| XP PREN 4005 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P5052- - O - SHEET AND STRIP - 0,3 MM <= A <= 6 MM |
| XP PREN 3456 : 1994 XP | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - ANNEALED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| XP PREN 3474 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024-T81 - SHEET AND STRIP - 0,25 MM <= A <= 6 MM |
| PREN 2298 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - SHEET AND STRIP - 0,25 < A <= 3 MM |
| PREN 3314 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - SOLUTION TREATED AND AGED - BAR FOR MACHINING - D <= 75 MM |
| PREN 3367 : 200P1 | AEROSPACE SERIES - STEEL FE-PL10 - HARDENED, TEMPERED AND COLD DRAWN - 1260 <= R[M] <= 2790 MPA - WIRE FOR SPRING - 0,20 <= D <= 10,50 MM |
| XP PREN 4100 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T62 - SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| PREN 2919 : 200P2 | AEROSPACE SERIES - STEEL FE-PL72 - CARBURIZED, HARDENED AND TEMPERED - BAR - D[E] <= 160 MM |
| PREN 3319 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64002 - ANNEALED - BAR FOR MACHINING - D <= 80 MM |
| PREN 3329 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 4250 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B41001 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3918 : 1995 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B41201 - FILLER METAL FOR BRAZING - TAPE |
| PREN 3934 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B21001 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3953 : 200P1 | AEROSPACE SERIES - SILVER BASE ALLOY AG-B12401 - FILLER METAL FOR BRAZING - WIRE |
| I.S. EN 2590:2017 | AEROSPACE SERIES - STEEL - SHEETS AND PLATES, HOT ROLLED - DIMENSIONS |
| DIN EN 2126:1993-12 | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P7075-T651 - PLATE 6 MM < A <= 80 MM |
| I.S. EN 2589:2017 | AEROSPACE SERIES - STEEL - SHEET AND STRIP, COLD ROLLED - THICKNESS 0,1 MM <= A <= 3 MM - DIMENSIONS |
| XP PREN 4099 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T62 - CLAD SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| XP PREN 4101 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T4 - SHEET AND STRIP WITH IMPROVED STRETCH FORMING CAPABILITY - 0,4 MM <= A <= 6 MM |
| PREN 3956 : 200P2 | AEROSPACE SERIES - SILVER BASE ALLOY AG-B14001 - FILLER METAL FOR BRAZING - WIRE |
| PREN 3942 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B41204 - FILLER METAL FOR BRAZING - BORIDED FOIL |
| PREN 4260 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF TECHNICAL SPECIFICATIONS |
| PREN 2297 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - BAR AND SECTIONS FOR WELDED RINGS |
| PREN 3517 : 200P2 | AEROSPACE SERIES - STEEL FE-PL2105 - AIR MELTED HARDENED AND TEMPERED - BAR FOR MACHINING - D[E] <= 150 MM - 1080 MPA <= R[M] 1280 MPA |
| PREN 3550 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (2024) - SOLUTION TREATED, STRETCHED AND ARTIFICIALLY AGED (T8511) - EXTRUDED BARS AND SECTIONS - (A OR D) <= 150 MM |
| PREN 3343 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7010) - SOLUTION TREATED AND ARTIFICIALLY AGED (T76511) - EXTRUDED BARS AND SECTIONS - 1 < (A OR D) <= 130 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3519 : 200P2 | |
| PREN 3462 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - ANNEALED - BAR FOR MACHINING D <= 150 MM |
| PREN 3492 : 200P1 | AEROSPACE SERIES - STEEL FE-PM44 - HARDENED AND TEMPERED - BAR FOR MACHINING - D[E] <= 150 MM |
| I.S. EN 3330:2009 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALEAD - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS |
| DIN EN 2395:2006-10 | Aerospace series - Aluminium alloy AL-P2014A-T4 or T42 - Sheet and strip - 0,4 mm <kleiner |
| EN 2590:2017 | Aerospace series - Steel - Sheets and plates, hot rolled - Dimensions |
| PREN 2621 : 200P2 | AEROSPACE SERIES - CIRCULAR STRUCTURAL TUBES SEAMLESS, IN LOW ALLOY STEEL - 4 <= D 100 MM - 0,5 <= A <= 10 MM - DIMENSIONS |
| PREN 2589 : 200P1 | AEROSPACE SERIES - STEEL - SHEET AND STRIP, COLD ROLLED - THICKNESS 0,1 MM <= A <= 3 MM - DIMENSIONS |
| PREN 3311 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - ANNEALED - BAR FOR MACHINING - D <= 150 MM |
| PREN 3330 : 200P1 | AEROSPACE SERIES - STEEL FE-PL45 - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| PREN 4244 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PM1708 - VACUUM ARC REMELTED - HARDENED AND TEMPERED - BAR - A OR D <= 200 MM - 1000 MPA <= R[M] <= 1140 MPA |
| I.S. EN 2543:2009 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS |
| PREN 3458 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P63 - ANNEALED - 900 <= R[M] <= 1160 MPA - BAR AND WIRE FOR FASTENERS MACHINED - D[E] <= 25 MM |
| PREN 3345 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7150) - SOLUTION TREATED, WATER QUENCHED CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T6511) - EXTRUDED BAR AND SECTION - (A OR D) <= 90 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3628 : 200P2 | AEROSPACE SERIES - LOCKWIRE DRAWN - CORROSION RESISTING STEEL |
| PREN 3893 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-W19001 - FILLER METAL FOR WELDING |
| PREN 3889 : 200P1 | AEROSPACE SERIES - STEEL FE-WM3801 - FILLER METAL FOR WELDING |
| PREN 3935 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B21001 - FILLER METAL FOR BRAZING - BORIDED FOIL |
| PREN 3955 : 200P2 | AEROSPACE SERIES - SILVER BASE ALLOY AG-B12401 - FILLER METAL FOR BRAZING - ROLLED FOIL |
| PREN 3886 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1303 - FILLER METAL FOR WELDING |
| 93/711173 DC : DRAFT JULY 1993 | PREN 3311 - AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - ANNEALED BAR FOR MACHINING - D <= 150 MM |
| BS EN 2542:2008 | Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts |
| BS EN 3330:2009 | Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed. Bar and wire. De ≤ 40 mm. For prevailing torque nuts |
| BS EN 2543:2009 | Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts |
| BS EN 2590:2017 | Aerospace series. Steel. Sheets and plates, hot rolled. Dimensions |
| BS EN 2326:1992 | Aluminium alloy AL-P6082-T6. Extruded bars and sections a or D ≤ 200 mm |
| EN 2589:2017 | Aerospace series - Steel - Sheet and strip, cold rolled - Thickness 0,1 mm ≤ a ≤ 3 mm - Dimensions |
| EN 2318:1992 | Aerospace series - Aluminium alloy AL-P2024-T3511 - Extruded bars and sections 1,2 mm < or = a or D < or = 150 mm |
| EN 2543:2009 | Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts |
| EN 2326:1992 | Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D < or = 200 mm |
| EN 2636:1993 | Aerospace series - Aluminium alloy AL-P6082-T6 - Extruded bars and sections a or D |
| EN 2384:1992 | Aerospace series - Aluminium alloy AL-P2014A T6511 - Extruded bars and sections a or D < or = 150 mm |
| EN 2127:1992 | Aerospace series - Aluminium alloy AL-P7075-T73511 - Extruded bars and sections a or D < or = 100 mm |
| EN 3330:2009 | Aerospace series - Steel FE-PL1503 (35CrMo4) - Annealead - Bar and wire - De ≤ 40 mm - For prevailing torque nuts |
| EN 2542:2008 | Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Bar and wire - De ≤ 40 mm - For prevailing torque nuts |
| EN 2385:1992 | Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D < or = 125 mm |
| EN 2630:1993 | Aerospace series - Aluminium alloy AL-P7009-T74511 - Extruded bars and sections a or D |
| EN 2128:1992 | Aerospace series - Aluminium alloy AL-P7075-T7351 - Drawn bars 6 mm < or = a or D < or = 75 mm |
| EN 2100:1992 | Aerospace series - Aluminium alloy AL-P2014A T4511 - Extruded bars and sections a or D < or = 200 mm |
| EN 2126:1992 | Aerospace series - Aluminium alloy AL-P7075-T651 - Plates 6 mm < a < or = 80 mm |
| XP PREN 4006 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082- - T4 OR T42 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| XP PREN 4258 : 1996 XP | AEROSPACE SERIES - METALLIC MATERIALS - GENERAL ORGANIZATION OF STANDARDIZATION - LINKS BETWEEN TYPES OF EN STANDARDS AND THEIR USE |
| XP PREN 4007 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P6082- - T6 OR T62 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| PREN 2661 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM - R[M] >= 860 MPA |
| PREN 2542 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - BAR AND WIRE - D[E] <= 40 MM FOR PREVAILING TORQUE NUTS |
| PREN 2771 : 200P2 | AEROSPACE SERIES - STEEL FE-PL53S - HARDENED AND TEMPERED - 1100 <= R[M] <= 1250 MPA - BAR - D[E] <= 110 MM |
| XP PREN 4102 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2219- - T81 - CLAD SHEET AND STRIP - 0,5 MM <= A <= 6 MM |
| XP PREN 3998 : 1994 XP | AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024- - T42 - SHEET AND STRIP - 0,4 MM <= A <= 6 MM |
| PREN 2779 : 200P1 | AEROSPACE SERIES - STEEL FE-PL56 - HARDENED AND TEMPERED - 1250 <= R[M] <= 1400 MPA - BAR - D[E] <= 70 MM |
| PREN 2543 : 200P2 | AEROSPACE SERIES - STEEL FE-PL43S - ANNEALED - SHEET AND STRIP - 0,3 <= A <= 2 MM FOR PREVAILING TORQUE NUTS |
| PREN 3478 : 200P1 | AEROSPACE SERIES - STEEL FE-PM63 - SOLUTION ANNEALED, TRANSFORMATION TREATED AND PRECIPITATION HARDENED - 1310 <= R[M] <= 1550 MPA - SHEET AND STRIP - A <= 6 MM |
| PREN 3498 : 200P2 | AEROSPACE SERIES - TITANIUM TI-P99002 - ANNEALED - SHEET AND STRIP, COLD ROLLED - A <= 6 MM - 390 MPA <= R[M] <= 540 MPA |
| PREN 3555 : 200P1 | AEROSPACE SERIES - ALUMINIUM ALLOY (7075) - SOLUTION TREATED, CONTROLLED STRETCHED AND ARTIFICIALLY AGED (T79510) - EXTRUDED BARS AND SECTION 1.2 < (A OR D) <= 100 MM - WITH PERIPHERAL COARSE GRAIN CONTROL |
| PREN 3887 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4101 - FILLER METAL FOR WELDING |
| PREN 3890 : 200P1 | AEROSPACE SERIES - STEEL FE-WM1502 - FILLER METAL FOR WELDING |
| PREN 3926 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B40001 - FILLER METAL FOR BRAZING - BORIDED FOIL |
| PREN 3938 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B46001 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3882 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1801 - FILLER METAL FOR WELDING |
| PREN 3906 : 200P1 | AEROSPACE SERIES - MARTENSITIC CORROSION RESISTING STEEL FE-PM3801 - AIR MELTED - SOLUTION TREATED - BAR - D <= 50 MM - FOR THE MANUFACTURE OF FASTENERS - 1100 MPA <= R[M] <= 1300 MPA |
| PREN 3931 : 1995 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B31001 - FILLER METAL FOR BRAZING - TAPE |
| PREN 3921 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B41203 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3963 : 200P1 | AEROSPACE SERIES - COPPER CU-BU9001 - FILLER METAL FOR BRAZING - ROLLED FOIL |
| PREN 3870 : 200P1 | AEROSPACE SERIES - TITANIUM ALLOY TI-P19001 - SOLUTION TREATED AND AGED - SHEET AND STRIP, HOT ROLLED - A <= 6 MM |
| PREN 3884 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH2601 - FILLER METAL FOR WELDING |
| PREN 3941 : 200P1 | AEROSPACE SERIES - NICKEL BASE ALLOY NI-B41204 - FILLER METAL FOR BRAZING - AMORPHOUS FOIL |
| PREN 3996 : 200P2 | AEROSPACE SERIES - ALUMINIUM AL-P1100-H14 - SHEET AND STRIP - 0,3 MM <= A <= 6 MM |
| PREN 3958 : 200P2 | AEROSPACE SERIES - SILVER BASE ALLOY AG-B14001 - FILLER METAL FOR BRAZING - ROLLED FOIL |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 2542:2008 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - BAR AND WIRE - D[E] <= 40 MM - FOR PREVAILING TORQUE NUTS |
| 10/30228107 DC : 0 | BS EN 2633 - AEROSPACE SERIES - ALUMINIUM ALLOY AL-P2024 - T3511 - EXTRUDED BARS AND SECTIONS - 1,2 MM <= D[E] <= 160 MM WITH PERIPHERAL COARSE GRAIN CONTROL |
| BS EN 2318:1992 | Aluminium alloy AL-P2024-T3511. Extruded bars and sections 1,2 mm ≤ a or D ≤ 150 mm |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.