PREN 2500/3 : 200P3
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 3: SPECIFIC REQUIREMENTS FOR HEAT RESISTING ALLOYS
Available format(s)
Hardcopy , PDF
Superseded date
28-06-1996
Superseded by
Language(s)
English
Published date
28-06-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
4 The use of metallic material EN aerospace standards
5 Instructions for drafting of metallic material EN aerospace
standards
The specific requirements for the drafting and use of heat resisting alloy material standards for aerospace applications are given in this standard. This shall be used together with EN 2500-1.
| Committee |
C5
|
| DevelopmentNote |
Inactive for new design, see PREN 4500-3 (07/2003)
|
| DocumentType |
Draft
|
| Pages |
2
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy |
| PREN 2299 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - TUBE |
| PREN 2657 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - BAR - A OR D <= 150 MM - R[M] >= 860 MPA |
| PREN 2296 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - FORGINGS |
| PREN 2659 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - FORGINGS - D[E] <= 100 MM - R[M] >= 860 MPA |
| PREN 2669 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - NOT HEAT TREATED - REFERENCE HEAT TREATMENT: SOLUTION TREATED AND PRECIPITATION TREATED - FORGING STOCK |
| PREN 3885 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3601 - FILLER METAL FOR WELDING |
| PREN 3894 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WD3201 - FILLER METAL FOR WELDING |
| PREN 3883 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH2301 - FILLER METAL FOR WELDING |
| PREN 3895 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH3901 - FILLER METAL FOR WELDING |
| PREN 4245 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PM1708 - VACUUM ARC REMELTED AS FORGED - FORGING STOCK - D[E] <= 300 MM |
| PREN 3888 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH1402 - FILLER METAL FOR WELDING |
| PREN 2298 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - SHEET AND STRIP - 0,25 < A <= 3 MM |
| PREN 3762 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 - SOFTENED AND COLD WORKED - WIRE FOR FORGED FASTENERS - D <= 15 MM - 1100 MPA <= R[M] <= 1300 MPA |
| PREN 2295 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED IN AIR - NON TREATED - FORGING STOCK |
| PREN 2297 : 200P1 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96HT - SOLUTION TREATED AND PRECIPITATION TREATED - R[M] >= 1080 MPA - BAR AND SECTIONS FOR WELDED RINGS |
| PREN 2961 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED - BAR FOR MACHINED FASTENERS - D <= 50 MM - R[M] >= 1270 MPA |
| PREN 2670 : 200P2 | AEROSPACE SERIES - HEAT RESISTING NICKEL BASE ALLOY NI-P96 - MELTED UNDER VACUUM - SOLUTION TREATED AND PRECIPITATION TREATED - FORGINGS |
| PREN 2952 : 200P3 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS - D <= 50 MM - 1270 MPA <= R[M] <= 1550 MPA |
| PREN 4244 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PM1708 - VACUUM ARC REMELTED - HARDENED AND TEMPERED - BAR - A OR D <= 200 MM - 1000 MPA <= R[M] <= 1140 MPA |
| PREN 4246 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH4101 - VACUUM MELTED - AS FORGED - FORGING STOCK - D[E] <= 360 MM |
| PREN 3761 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 - SOFTENED AND COLD WORKED - BAR FOR FORGED FASTENERS - D <= 50 MM - 1100 MPA <= R[M] <= 1300 MPA |
| PREN 3886 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1303 - FILLER METAL FOR WELDING |
| PREN 2661 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - SHEET AND STRIP - A <= 3 MM - R[M] >= 860 MPA |
| PREN 2658 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-PH1402 - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED - AS FORGED - FORGING STOCK - D[E] <= 360 MM |
| PREN 2660 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-CH1401 - AS CAST - REMELTING STOCK |
| PREN 3639 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY FE-PA2601 - SOFTENED AND COLD WORKED - WIRE FOR FORGED FASTENERS - D <= 15 MM - 900 MPA <= R[M] <= 1100 MPA |
| PREN 3666 : 200P2 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-PH2601 - SOLUTION TREATED AND COLD WORKED - BAR FOR FORGED FASTENERS - D <= 50 MM - 1550 MPA <= R[M] <= 1830 MPA |
| PREN 3887 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY CO-WH4101 - FILLER METAL FOR WELDING |
| PREN 3882 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH1801 - FILLER METAL FOR WELDING |
| PREN 3884 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOY NI-WH2601 - FILLER METAL FOR WELDING |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
| PREN 2500/1 : 200P4 | AEROSPACE SERIES - INSTRUCTIONS FOR THE DRAFTING AND USE OF METALLIC MATERIAL STANDARDS - PART 1: GENERAL REQUIREMENTS |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.