PREN 13565-1 : DRAFT 2016
Current
The latest, up-to-date edition.
FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
09-08-2016
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General construction requirements
5 Performance Characteristics of Foam Components
6 Documentation
7 Marking
8 Evaluation of conformity
Annex A (normative) - Hydrostatic test
Annex B (normative) - Ageing test for plastics, thermoplastics
or thermosets; and reinforced resin materials
Annex C (normative) - Liquid exposure test
Annex D (normative) - Heat and fire resistance test for
foam generators
Annex E (normative) - Flow tests
Annex F (normative) - Quality of foam from aspirating components
Annex G (normative) - High expansion foam generator test
Annex H (normative) - Range tests for branchpipes
(hand and monitor)
Annex I (normative) - Area coverage test for foam sprayers
and nozzles
Annex J (normative) - Maximum flow and back pressure
Annex K (normative) - Insertion and deployment of
semi-subsurface hose
Annex L (normative) - Salt Spray Corrosion Test
Annex M (normative) - Stress Corrosion Test
Annex N (normative) - Internal Corrosion Test
Bibliography
Describes requirements for materials, construction, and performance of components intended for use in fixed foam fire fighting systems, and using foam concentrates conforming to EN 1568-1 to EN 1568-4.
| Committee |
TC 191
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| 16/30341197 DC : 0 | Identical |
| 16/30341197 DC : DRAFT JULY 2016 | Identical |
| DIN 14493-100:2002-09 | FIXED FOAM EXTINGUISHING SYSTEMS - PART 100: REQUIREMENTS AND TEST METHODS FOR FOAM SYSTEMS FOR LOW AND MEDIUM EXPANSION FOAM |
| 04/30124343 DC : 0 | EN 13562-2 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE |
| PREN 13565-2 : DRAFT 2016 | FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 2: DESIGN, CONSTRUCTION AND MAINTENANCE |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 1179-1:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports |
| ISO 885:2000 | General purpose bolts and screws — Metric series — Radii under the head |
| EN 20225 : 1991 | FASTENERS - BOLTS, SCREWS, STUDS AND NUTS - SYMBOLS AND DESIGNATIONS OF DIMENSIONS |
| EN ISO 1179-1:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2013) |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6447:1983 | Rubber seals Joint rings used for gas supply pipes and fittings Specification for material |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
| ISO 225:2010 | Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| EN ISO 228-1:2003 | Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000) |
| ISO 6448:1985 | Rubber seals Joint rings used for petroleum product supply pipes and fittings Specification for material |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| ISO 4633:2015 | Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 12542:2010 | LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.