PREN 13107 : DRAFT 2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS
Superseded date
01-06-2015
Published date
25-03-2013
Publisher
Sorry this product is not available in your region.
1 Scope
2 Normative references
3 Terms and definitions
4 Units and symbols
5 General requirements
6 Combinations of actions and safety measures
7 Actions and environmental influences
8 Limit states
9 Verifications
10 Type of construction
11 Components
12 Protection of workers
Annex A (normative) - Documentation
Annex B (informative) - Extracts from the
EN 1990:2002(D)
Annex ZA (informative) - Relationship between this
European Standard and the Essential
Requirements of EU Directive 2000/9/EC
relative to cableway installations designed
to carry persons
Defines the safety requirements applicable to civil engineering works for installations for cableway installations designed to carry persons.
| Committee |
TC 242
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| 13/30275585 DC : 0 | Identical |
| CEN/TR 14819-1:2004 | Safety recommendations for cableway installations designed to carry persons - Prevention and fight against fire - Part 1: Funicular railways in tunnels |
| 03/116757 DC : DRAFT OCT 2003 | EN 81-22 - SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 22: ELECTRIC PASSENGER AND GOODS PASSENGER LIFTS WITH INCLINED TRAVEL PATH |
| I.S. CEN TR 14819-1:2004 | SAFETY RECOMMENDATIONS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PREVENTION AND FIGHT AGAINST FIRE - PART 1: FUNICULAR RAILWAYS IN TUNNELS |
| 03/303113 DC : DRAFT FEB 2003 | EN 13796-2 - SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
| 01/705738 DC : DRAFT MAR 2001 | PREN 12927-4 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 4: END FIXING |
| PD CEN/TR 14819-1:2004 | Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Funicular railways in tunnels |
| PREN 12927-6 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA |
| 99/708206 DC : DRAFT MAY 1999 | PREN 12927-2 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS |
| 99/708207 DC : DRAFT MAY 1999 | PREN 12927-6 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA |
| PREN 12927-2 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS |
| 00/715519 DC : DRAFT OCT 2000 | PREN 13796-3 - SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - CARRIERS - PART 3: FATIGUE TESTINGS |
| ISO 12494:2017 | Atmospheric icing of structures |
| EN 12397:2017 | Safety requirements for cableway installations designed to carry persons - Operation |
| EN 1998-6:2005 | Eurocode 8: Design of structures for earthquake resistance - Part 6: Towers, masts and chimneys |
| EN 12929-1:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 1: Requirements for all installations |
| EN 12927-6:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 6: Discard criteria |
| EN 12930:2015 | Safety requirements for cableway installations designed to carry persons - Calculations |
| EN 13223:2015 | Safety requirements for cableway installations designed to carry persons - Drive systems and other mechanical equipment |
| EN 1995-2:2004 | Eurocode 5: Design of timber structures - Part 2: Bridges |
| EN 12408:2004 | Safety requirements for cableway installations designed to carry persons - Quality assurance |
| EN 13796-2:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 2: Slipping resistance tests for grips |
| EN 12929-2:2015 | Safety requirements for cableway installations designed to carry persons - General requirements - Part 2: Additional requirements for reversible bicable aerial ropeways without carrier truck brakes |
| EN 1536:2010+A1:2015 | Execution of special geotechnical work - Bored piles |
| EN 13796-1:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers |
| EN 12927-1:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixings |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| EN 1909:2017 | Safety requirements for cableway installations designed to carry persons - Recovery and evacuation |
| EN 12927-2:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 2: Safety factors |
| EN 12927-7:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 7: Inspection, repair and maintenance |
| 2000/9/EC : 2000 | DIRECTIVE 2000/9/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 20 MARCH 2000 RELATING TO CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 15700:2011 | Safety for conveyor belts for winter sport or leisure use |
| EN 12927-4:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 4: End fixings |
| EN 12927-3:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 3: Long splicing of 6 strand hauling, carrying hauling and towing ropes |
| EN 1709:2004 | Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 8930:1987 | General principles on reliability for structures List of equivalent terms |
| EN 12927-5:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 5: Storage, transportation, installation and tensioning |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| EN 13796-3:2017 | Safety requirements for cableway installations designed to carry persons - Carriers - Part 3: Fatigue testing |
| EN 13243:2015 | Safety requirements for cableway installations designed to carry persons - Electrical equipment other than for drive systems |
| EN 14199:2015 | Execution of special geotechnical works - Micropiles |
| EN 12385-8:2002 | Steel wire ropes - Safety - Part 8: Stranded hauling and carrying-hauling ropes for cableway installations designed to carry persons |
| EN 12927-8:2004 | Safety requirements for cableway installations designed to carry persons - Ropes - Part 8: Magnetic rope testing (MRT) |
| EN 1537:2013 | Execution of special geotechnical works - Ground anchors |
| EN 13670:2009 | Execution of concrete structures |
| EN 1908:2015 | Safety requirements of cableway installations designed to carry persons - Tensioning devices |
| EN 12699:2015 | Execution of special geotechnical works - Displacement piles |
| EN 1998-5:2004 | Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining structures and geotechnical aspects |
| EN 12385-9:2002 | Steel wire ropes - Safety - Part 9: Locked coil carrying ropes for cableway installations designed to carry persons |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.