PD CEN/TR 17024:2017
Current
The latest, up-to-date edition.
Natural stones. Guidance for use of natural stones
Hardcopy , PDF
English
31-01-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General specifications
5 Delivery acceptance
6 Dealing with visual and
dimensional non conformities
Pertains to natural stone products intended for masonry elements, wall coverings (including tiles), internal floor and stair finishes (including tiles) and exterior floor and stair finishes (including paving), as well as massive stone elements.
| Committee |
B/545
|
| DocumentType |
Standard
|
| Pages |
30
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report applies to natural stone products intended for masonry elements, wall coverings (including tiles), internal floor and stair finishes (including tiles) and exterior floor and stair finishes (including paving), as well as massive stone elements.
It provides guidance for the application and use of natural stone products in accordance with European product standards.
This Technical Report does not deal with coatings or staining problems, and does not take into account treatments that could modify the performance characteristics of the materials.
This Technical Report does not apply to agglomerated stones and aggregates.
| Standards | Relationship |
| CEN/TR 17024:2017 | Identical |
| EN 1468:2012 | Natural stone - Rough slabs - Requirements |
| CEN/TS 16165:2016 | Determination of slip resistance of pedestrian surfaces - Methods of evaluation |
| EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| EN 16306:2013 | Natural stone test methods - Determination of resistance of marble to thermal and moisture cycles |
| EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
| EN 1936:2006 | Natural stone test methods - Determination of real density and apparent density, and of total and open porosity |
| EN 14066:2013 | Natural stone test methods - Determination of resistance to ageing by thermal shock |
| EN 1342:2012 | Setts of natural stone for external paving - Requirements and test methods |
| EN 13373:2003 | Natural stone test methods - Determination of geometric characteristics on units |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 12371:2010 | Natural stone test methods - Determination of frost resistance |
| EN 771-6:2011+A1:2015 | Specification for masonry units - Part 6: Natural stone masonry units |
| EN 12407:2007 | Natural stone test methods - Petrographic examination |
| EN 12670:2001 | Natural stone - Terminology |
| EN 13755:2008 | Natural stone test methods - Determination of water absorption at atmospheric pressure |
| EN 1926:2006 | Natural stone test methods - Determination of uniaxial compressive strength |
| EN 14579:2004 | Natural stone test methods - Determination of sound speed propagation |
| EN 1341:2012 | Slabs of natural stone for external paving - Requirements and test methods |
| EN 12440:2017 | Natural stone - Denomination criteria |
| EN 1467:2012 | Natural stone - Rough blocks - Requirements |
| EN 14146:2004 | Natural stone test methods - Determination of the dynamic modulus of elasticity (by measuring the fundamental resonance frequency) |
| EN 14158:2004 | Natural stone test methods - Determination of rupture energy |
| EN 12059:2008+A1:2011 | Natural stone products - Dimensional stone work - Requirements |
| EN 1925:1999 | Natural stone test methods - Determination of water absorption coefficient by capillarity |
| EN 12372:2006 | Natural stone test methods - Determination of flexural strength under concentrated load |
| EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| EN 13364:2001 | Natural stone test methods - Determination of the breaking load at dowel hole |
| EN 14157:2017 | Natural stone test methods - Determination of the abrasion resistance |
| EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
| EN 14581:2004 | Natural stone test methods - Determination of linear thermal expansion coefficient |
| EN 16140:2011 | Natural stone test methods - Determination of sensitivity to changes in appearance produced by thermal cycles |
| EN 1343:2012 | Kerbs of natural stone for external paving - Requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.