NFPA 654 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS
Hardcopy
03-09-2019
English
01-01-2017
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General Requirements
Chapter 5 - Performance-Based Design Option
Chapter 6 - Facility and Systems Design
Chapter 7 - Process Equipment
Chapter 8 - Fugitive Dust Control and Housekeeping
Chapter 9 - Ignition Sources
Chapter 10 - Fire Protection
Chapter 11 - Training and Procedures
Chapter 12 - Inspection and Maintenance
Annex A - Explanatory Material
Annex B - Explosion Protection
Annex C - Informational Primer on Spark Detection
and Extinguishing Systems
Annex D - Dust Layer Characterization and Precautions
Annex E - Deflagration Propagation Isolation Methods
Annex F - Use of Water as Extinguishing Agent for
Combustible Particulate Solids
Annex G - Informational References
Index
Gives requirements for all phases of the manufacturing, processing, blending, conveying, repackaging, and handling of combustible particulate solids or hybrid mixtures, regardless of concentration or particle size, where the materials present a fire, a flash fire, or an explosion hazard.
DevelopmentNote |
2006 Edition is also available in Spanish Language, See NFPA 654 SPANISH. (05/2011) Also available with NFPA GUIDE TO COMBUSTIBLE DUST, see NFPA 654 SET. (02/2012) Supersedes & incorporates NFPA 650. (02/2015)
|
DocumentType |
Standard
|
Pages |
72
|
PublisherName |
National Fire Protection Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
NFPA 68 : 2018 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
NFPA 34 : 2018 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
A-A-56017 Base Document:1990 | CELLULOSE ACETATE |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
NFPA 1 : 2021 | FIRE CODE |
C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
UFC 3-410-04N : 2004 | UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION |
ASTM D 3214 : 1996 | Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002) |
ISA 12.10 : 1988 | AREA CLASSIFICATION IN HAZARDOUS (CLASSIFIED) DUST LOCATIONS |
NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
BS 5908-1:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises |
CAN/CSA-Z767-17 | Process safety management |
AIHA Z9.4 : 2011 | ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES |
NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
NFPA 497B : 1991 | RECOMMENDED PRACTICE FOR THE CLASSIFICATION OF CLASS II HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
NFPA 1 : 2018 | FIRE CODE |
NFPA 400 : 2019 | Hazardous Materials Code |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
NFPA 652 : 2016 | FUNDAMENTALS OF COMBUSTIBLE DUST |
AMCA 99 : 2016 | STANDARDS HANDBOOK |
NFPA 495 : 2013 | EXPLOSIVE MATERIALS CODE |
NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
ASTM E 1491 : 2006 | Standard Test Method for Minimum Autoignition Temperature of Dust Clouds |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
NFPA 1250 : 2015 | FIRE AND EMERGENCY SERVICES ORGANIZATION RISK MANAGEMENT |
VDI 3673:1979-06 | Pressure release of dust explosions |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
IEC 61340-4-4:2012+AMD1:2014 CSV | Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC) |
NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
NFPA 101 : 2018 | LIFE SAFETY CODE |
ISA 84.00.01-1 : 2004 | FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
ASME B31.3:2016 | PROCESS PIPING |
NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
NFPA 2113 : 2012 | SELECTION, CARE, USE, AND MAINTENANCE OF FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST SHORT-DURATION THERMAL EXPOSURES FROM FIRE |
NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
ASTM E 1515 : 2014 : REDLINE | Standard Test Method for Minimum Explosible Concentration of Combustible Dusts |
NFPA 1451 : 2013 | FIRE AND EMERGENCY SERVICE VEHICLE OPERATIONS TRAINING PROGRAM |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
NFPA SFPE PERFORMANCE BASED FIRE PROT : 2006 | SFPE ENGINEERING GUIDE TO PERFORMANCE-BASED FIRE PROTECTION |
NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
ISO 6184-1:1985 | Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air |
NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
ASTM E 2021 : 2015 : REDLINE | Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers |
ASTM E 136 : 2016-02 | TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C |
NFPA 86 : 2015 | OVENS AND FURNACES |
NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ISO 6184-4:1985 | Explosion protection systems Part 4: Determination of efficacy of explosion suppression systems |
NFPA 499 : 2017 | CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
CFR 30(PTS1-199) : JUL 2017 | MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR |
NFPA 77 : 2014 | STATIC ELECTRICITY |
NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.