NFPA 30 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
Available format(s)
Hardcopy
Superseded date
13-08-2021
Superseded by
Language(s)
English
Published date
01-01-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - Definition and Classification of Liquids
Chapter 5 - General Requirements (Reserved)
Chapter 6 - Fire and Explosion Prevention and Risk
Control
Chapter 7 - Electrical Systems
Chapter 8 - Reserved
Chapter 9 - Storage of Liquids in Containers - General
Requirements
Chapter 10 - Storage of Liquids in Containers - Mercantile
Occupancies
Chapter 11 - Storage of Liquids in Containers
Industrial Occupancies
Chapter 12 - Storage of Liquids in Containers Storage
Occupancies
Chapter 13 - Storage of Liquids in Containers
Detached, Unprotected Buildings
Chapter 14 - Hazardous Materials Storage Lockers
Chapter 15 - Outdoor Storage
Chapter 16 - Automatic Fire Protection for Inside Liquid
Storage Areas
Chapter 17 - Processing Facilities
Chapter 18 - Dispensing, Handling, Transfer, and Use of
Liquids
Chapter 19 - Specific Operations
Chapter 20 - Reserved
Chapter 21 - Storage of Liquids in Tanks
Requirements for All Storage Tanks
Chapter 22 - Storage of Liquids in Tanks
Aboveground Storage Tanks
Chapter 23 - Storage of Liquids in Tanks
Underground Tanks
Chapter 24 - Storage Tank Buildings
Chapter 25 - Storage Tank Vaults
Chapter 26 - Reserved
Chapter 27 - Piping Systems
Chapter 28 - Bulk Loading and Unloading Facilities for
Tank Cars and Tank Vehicles
Chapter 29 - Wharves
Annex A - Explanatory Material
Annex B - Emergency Relief Venting for Fire Exposure
for Aboveground Tanks
Annex C - Temporarily Out of Service, Closure in
Place, or Closure by Removal of
Underground Storage Tanks
Annex D - Development of Fire Protection System
Design Criteria for Chapter 16 and
Suggested Fire Protection for Some
Containers of Flammable and Combustible
Liquids Not Covered in Chapter 16
Annex E - Suggested Test Protocol for Developing Fire
Protection System Design Criteria for
Containers of Flammable and Combustible
Liquids
Annex F - Fugitive Emissions Calculations
Annex G - Management of Security
Annex H - Sample Ordinance Adopting NFPA 30
Annex I - Informational References
Index
Gives fundamental safeguards for the storage, handling, and use of flammable and combustible liquids.
| DevelopmentNote |
Included in NFPA C3 SET (Available as Softbound and CD ROM). (01/2004) Also included in NFPA 30 HDBK (with NFPA 30A) and in NFPA 30 SET (with NFPA 30 HDBK). (08/2011) 2015 Version is also available in Spanish; see NFPA 30 SPANISH. (12/2015)
|
| DocumentType |
Standard
|
| Pages |
167
|
| PublisherName |
National Fire Protection Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NFPA 434 : 2002 | CODE FOR THE STORAGE OF PESTICIDES |
| SAE J 1715 : 2014 | HYBRID ELECTRIC VEHICLE (HEV) AND ELECTRIC VEHICLE (EV) TERMINOLOGY |
| NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
| API 12D CHINESE : 2008 | SPECIFICATION FOR FIELD WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
| API 2003 REDLINE : 2008 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| ASTM D 4865 : 2009 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| API 500B : 88 ERRATA | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT DRILLING RIGS & PRODUCTION FACILITIES ON LAND & ON MARINE FIXED & MOBILE PLATFORMS |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| API 2009 : 2002 : R2007 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
| API 2203 : 3ED 87 | FIRE PRECAUTIONS FOR FUELING FIXED, PORTABLE AND SELF-PROPELLED ENGINE-DRIVEN EQUIPMENT |
| ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
| NFPA 1403 SPANISH : 2007 | LIVE FIRE TRAINING EVOLUTIONS |
| NGCMA Z130.1 : 2004 | GOLF CARS - SAFETY AND PERFORMANCE SPECIFICATIONS |
| SAE J 2358 : 2016 | LOW SPEED VEHICLES |
| CSA Z314.23 : 2016 | CHEMICAL STERILIZATION OF REUSABLE MEDICAL DEVICES IN HEALTH CARE SETTINGS |
| CSA Z662.1 : 2013 | COMMENTARY ON CSA Z662-07, OIL AND GAS PIPELINE SYSTEMS |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| API RP 2219 : 2016 | SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE |
| API 500A : 4ED 82(R1987) | CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS IN PETROLEUM REFINERIES |
| NFPA 102 : 2016 | GRANDSTANDS, FOLDING AND TELESCOPIC SEATING, TENTS, AND MEMBRANE STRUCTURES |
| Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
| SAE J 2645 : 2018 | LIQUEFIED NATURAL GAS (LNG) VEHICLE METERING AND DISPENSING SYSTEMS - TRUCK AND BUS |
| NFPA 497M : 1991 | CLASSIFICATION OF GASES, VAPORS AND DUSTS FOR ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS |
| NFPA 61B : 1989 | PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES |
| AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ASTM D 4865 : 2009 : R2014 | Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems |
| ASTM E 1260 : 2003 : R2009 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| NFPA 804 : 2015 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| NFPA 805 : 2015 | PERFORMANCE-BASED STANDARD FOR FIRE PROTECTION FOR LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| NFPA 914 : 2015 | FIRE PROTECTION OF HISTORIC STRUCTURES |
| NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
| NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| NFPA 18 : 2017 | WETTING AGENTS |
| NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 122 : 2015 | FIRE PREVENTION AND CONTROL IN METAL/NONMETAL MINING AND METAL MINERAL PROCESSING FACILITIES |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
| NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
| NFPA 505 : 2018 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| NFPA 140 : 2018 | MOTION PICTURE AND TELEVISION PRODUCTION STUDIO SOUNDSTAGES, APPROVED PRODUCTION FACILITIES, AND PRODUCTION LOCATIONS |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| NFPA 418 : 2016 | HELIPORTS |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 851 : 2010 | FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 502 : 2017 | ROAD TUNNELS, BRIDGES, AND OTHER LIMITED ACCESS HIGHWAYS |
| NFPA 76 : 2016 | FIRE PROTECTION OF TELECOMMUNICATIONS FACILITIES |
| NFPA 87 : 2018 | FLUID HEATERS |
| NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
| NFPA 415 : 2016 | AIRPORT TERMINAL BUILDINGS, FUELING RAMP DRAINAGE, AND LOADING WALKWAYS |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| NFPA 34 : 2018 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| NFPA 59 : 2018 | UTILITY LP-GAS PLANT CODE |
| ASCE 7 02 : 2003 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| BS EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| DIN EN 12312-5:2009-08 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment (includes Amendment A1:2009) |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| MIL-T-462 Revision E:1985 | TANK, LIQUID STORAGE, METAL, FUEL OIL, HORIZONTAL |
| ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
| PIP CVC01015 : 2013 | CIVIL DESIGN CRITERIA |
| MIL-G-19826 Revision F:1984 | GENERATOR SET, DIESEL ENGINE, ALTERNATING CURRENT FOR FACILITIES CONSTRUCTION, 1O KW THRU 500 KW (NOT STOCKED) |
| NFPA 58:2024 | Liquefied Petroleum Gas Code |
| ASHRAE HDBK HVAC APPLICATIONS : 2015 | ASHRAE HANDBOOK - HVAC APPLICATIONS |
| IPC CH 65 : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| IPC CH 65 CHINESE : B | GUIDELINES FOR CLEANING OF PRINTED BOARDS AND ASSEMBLIES |
| UFC 4-141-04 : Change 1 | UNIFIED FACILITIES CRITERIA - EMERGENCY OPERATIONS CENTER PLANNING AND DESIGN |
| UFC 4-211-02 : 2012 | UNIFIED FACILITIES CRITERIA - AIRCRAFT CORROSION CONTROL AND PAINT FACILITIES |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
| NFPA 419 : 1992 | MASTER PLANNING AIRPORT WATER SUPPLY SYSTEMS FOR FIRE PROTECTION |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| ISA TR12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2 |
| PREN 14015-1 : DRAFT 2000 | SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| CSA Z98 : 2014 | PASSENGER ROPEWAYS AND PASSENGER CONVEYORS |
| ANSI O2.1 : 1983 | SAWMILLS - SAFETY REQUIREMENTS FOR |
| NFPA 481 : 2000 | PRODUCTION, PROCESSING, HANDLING, AND STORAGE OF TITANIUM |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| ASTM D 1998 : 2015 : REDLINE | Standard Specification for Polyethylene Upright Storage Tanks |
| BS EN 60079-29-2:2015 | Explosive atmospheres Gas detectors. Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| NFPA 912 : 1993 | FIRE PROTECTION IN PLACES OF WORSHIP |
| ASCE/SEI 59 11 : 2011 | BLAST PROTECTION OF BUILDINGS |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| NFPA 85A : 1987 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL AND NATURAL GAS FIRED SINGLE BURNER BOILER FURNACES |
| ACI 350.2R : 2004 | CONCRETE STRUCTURES FOR CONTAINMENT OF HAZARDOUS MATERIALS |
| NSS 1740.12 : 0 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
| 07/30170577 DC : DRAFT AUG 2007 | BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| MIL-C-19908 Revision D:1986 | CAPS, FUEL STORAGE TANK |
| NFPA 121 : 2001 | FIRE PROTECTION FOR SELF-PROPELLED AND MOBILE SURFACE MINING EQUIPMENT |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
| NFPA 901 : 2016 | CLASSIFICATIONS FOR INCIDENT REPORTING AND FIRE PROTECTION DATA |
| CSA Z662 PACKAGE : 2011 | CONSISTS OF Z662-11, OIL AND GAS PIPELINE SYSTEMS AND Z662.1-11, COMMENTARY ON CSA Z662-11, OIL AND GAS PIPELINE SYSTEMS |
| API 353 : 2006 | MANAGING SYSTEMS INTEGRITY OF TERMINAL AND TANK FACILITIES - MANAGING THE RISK OF LIQUID PETROLEUM RELEASES |
| NFPA 224 : 1985 | HOMES AND CAMPS IN FOREST AREAS |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
| NFPA 600 : 2015 | INDUSTRIAL FIRE BRIGADES |
| NFPA 16A : 1994 | INSTALLATION OF CLOSED HEAD FOAM WATER SPRINKLER SYSTEMS |
| NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
| ANS 40.35-1991 | VOLUME REDUCTION OF LOW-LEVEL RADIOACTIVE WASTE OR MIXED WASTE |
| NFPA 231E : 1996 | STORAGE OF BALED COTTON |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| ASTM E 1344 : 1990 : R1997 : EDT 1 | Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities |
| ASTM E 1344 : 1990 : R2006 | Standard Guide for Evaluation of Fuel Ethanol Manufacturing Facilities (Withdrawn 2009) |
| ASTM E 1260 : 2003 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| API 500 RUSSIAN :1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API 500 RUSSIAN : 1997 : R2002 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
| NFPA 909 : 2017 | PROTECTION OF CULTURAL RESOURCE PROPERTIES - MUSEUMS, LIBRARIES, AND PLACES OF WORSHIP |
| ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
| NFPA 101B : 2002 | MEANS OF EGRESS FOR BUILDINGS AND STRUCTURES |
| NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
| I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| NFPA 803 : 1998 | FIRE PROTECTION FOR LIGHT WATER NUCLEAR POWER PLANTS |
| I.S. EN 14161:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| NFPA 230 : 2003 | FIRE PROTECTION OF STORAGE |
| NFPA 1 : 2021 | FIRE CODE |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| I.S. EN 12312-5:2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| EN 12312-5:2005+A1:2009 | Aircraft ground support equipment - Specific requirements - Part 5: Aircraft fuelling equipment |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| MIL-STD-186 Revision F:2002 | PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
| UFC 3-540-01 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - ENGINE-DRIVEN GENERATOR SYSTEMS FOR PRIME AND STANDBY POWER APPLICATIONS |
| UFC 4-440-01 : 2014 | UNIFIED FACILITIES CRITERIA - WAREHOUSES AND STORAGE FACILITIES |
| ASME B31.4 : 2016 | PIPELINE TRANSPORTATION SYSTEMS FOR LIQUIDS AND SLURRIES |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| BS PD8010-1(2015) : 2015 | PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| UFC 3-600-01 : Change 2 | UNIFIED FACILITIES CRITERIA - FIRE PROTECTION ENGINEERING FOR FACILITIES |
| UFC 1-201-01 : 2013 | UNIFIED FACILITIES CRITERIA - NON-PERMANENT DOD FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| API RP 2207 : 2017 | PREPARING TANK BOTTOMS FOR HOT WORK |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
| NFPA 306 : 2014 | CONTROL OF GAS HAZARDS ON VESSELS |
| NFPA 1141 : 2017 | FIRE PROTECTION INFRASTRUCTURE FOR LAND DEVELOPMENT IN WILDLAND, RURAL, AND SUBURBAN AREAS |
| NFPA 1936 : 2015 | POWERED RESCUE TOOLS |
| NFPA 432 : 2002 | CODE FOR THE STORAGE OF ORGANIC PEROXIDE FORMULATIONS |
| API 500C : 2ED 84(R1990) | CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PIPELINE TRANSPORTATION FACILITIES |
| MIL HDBK 1028/8 : A | DESIGN OF PEST MANAGEMENT FACILITIES |
| API 1129 : 1996 | ASSURANCE OF HAZARDOUS LIQUID PIPELINE SYSTEM INTEGRITY |
| 04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
| NFPA 33 FRENCH : 1995 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 88B : 1997 | REPAIR GARAGES |
| NFPA 1406 : 1993 | OUTSIDE LIVE FIRE TRAINING EVOLUTIONS |
| NFPA 410 : 2015 | AIRCRAFT MAINTENANCE |
| ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
| 00/715206 DC : DRAFT OCT 2000 | PREN 14015-1 - SPECIFICATION FOR THE DESIGN AND MANUFACTURE OF SITE BUILT, VERTICAL, CYLINDRICAL, FLAT-BOTTOMED, ABOVE GROUND, WELDED, METALLIC TANKS FOR THE STORAGE OF LIQUIDS AT AMBIENT TEMPERATURE AND ABOVE - PART 1: STEEL TANKS |
| PD 8010-1:2004 | Code of practice for pipelines Steel pipelines on land |
| CSA Z98S2 : 2004 | SUPPLEMENT NO. 2 TO CAN/CSA-Z98-01 - PASSENGER ROPEWAYS AND CONVEYORS |
| NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
| NFPA 651 : 1998 | MACHINING AND FINISHING OF ALUMINUM AND THE PRODUCTION AND HANDLING ALUMINUM POWDERS |
| NFPA 1620 : 2015 | PRE-INCIDENT PLANNING |
| ISA RP12.24.01 : 1998 | RECOMMENDED PRACTICE FOR CLASSIFICATIONS OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS I ZONE 0, ZONE 1, OR ZONE 2 |
| NFPA 123 : 1999 | FIRE PREVENTION AND CONTROL IN UNDERGROUND BITUMINOUS COAL MINES |
| CAN/CSA-Z314-18 | Canadian medical device reprocessing |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
| NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| API RP 1627 : 1986 | STORAGE AND HANDLING OF GASOLINE-METHANOL/COSOLVENT BLENDS AT DISTRIBUTION TERMINALS AND SERVICE STATIONS |
| API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| NFPA 85D : 1989 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL FIRED MULTIPLE BURNER BOILER FURNACES |
| NFPA 395 : 1993 | STORAGE OF FLAMMABLE AND COMBUSTIBLE LIQUIDS ON FARMS AND ISOLATED SITES |
| NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
| NFPA 231C : 1998 | RACK STORAGE OF MATERIALS |
| NFPA 19911 : 1991 | FIRE PROTECTION OF MUSEUMS AND MUSEUM COLLECTIONS |
| NFPA 802 : 1993 | NUCLEAR RESEARCH AND PRODUCTION REACTORS |
| NFPA 386 : 1990 | PORTABLE SHIPPING TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| NFPA 43D : 1994 | STORAGE OF PESTICIDES |
| NFPA 1500 : 2018 | FIRE DEPARTMENT OCCUPATIONAL SAFETY, HEALTH, AND WELLNESS PROGRAM |
| NFPA 497A : 1992 | CLASSIFICATION OF CLASS I HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
| NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
| NFPA 913 : 1992 | HISTORIC SITES AND STRUCTURES |
| API 1632 : 1996 | CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS |
| API 2021A : 1998 | INTERIM STUDY - PREVENTION AND SUPPRESSION OF FIRES IN LARGE ABOVEGROUND ATMOSPHERIC STORAGE TANKS |
| I.S. EN 60079-29-2:2015 | EXPLOSIVE ATMOSPHERES - PART 29-2: GAS DETECTORS - SELECTION, INSTALLATION, USE AND MAINTENANCE OF DETECTORS FOR FLAMMABLE GASES AND OXYGEN |
| AAMI TIR56:2013(R2020) | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
| ANSI A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| ASTM E 2733 : 2010 : R2015 | Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems |
| ASTM E 2798 : 2011 | Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application |
| API 2210:2000 | FLAME ARRESTERS FOR VENTS OF TANKS STORING PETROLEUM PRODUCTS |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| API 551 : 2016 | PROCESS MEASUREMENT |
| API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| CSA B335 : 2015 | SAFETY STANDARD FOR LIFT TRUCKS |
| BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
| BS EN 12312-5 : 2005 | AIRCRAFT GROUND SUPPORT EQUIPMENT - SPECIFIC REQUIREMENTS - PART 5: AIRCRAFT FUELLING EQUIPMENT |
| ISO 28300:2008 | Petroleum, petrochemical and natural gas industries — Venting of atmospheric and low-pressure storage tanks |
| NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| CSA N293 : 2012 : INC : UPD 1 : 2017 : R201700 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 | IBC® Code and Commentary, Volume 2 |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| CSA N293 : 2012(R2018) | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| NASA KSC STD Z 0007 : 1973 | DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| ASTM E 2681 : 2013 | Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum |
| CSA N293 : 2012 | FIRE PROTECTION FOR NUCLEAR POWER PLANTS |
| CSA B139 : 2015 | INSTALLATION CODE FOR OIL-BURNING EQUIPMENT |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| ANSI L1.1 : 1981 | SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY, |
| UNI EN ISO 28300 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| UNI EN ISO 10440-1 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| CSA CE CODE SAFETY PACKAGE : 2012 | CE CODE SAFETY PACKAGE |
| ANSI N304 : 1986 | NUCLEAR FUEL FACILITIES FOR REPROCESSING FUEL-FIRE PROTECTION, |
| ANSI B77.1 : 2017 | PASSENGER ROPEWAYS - AERIAL TRAMWAYS, AERIAL LIFTS, SURFACE LIFTS, TOWS AND CONVEYORS - SAFETY STANDARD |
| NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
| NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
| API 1003 : 3ED 86 | PRECAUTIONS AGAINST ELECTROSTATIC IGNITION DURING LOADING OF TANK TRUCK MOTOR VEHICLES |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| AAMI TIR56 : 2013 | GUIDANCE FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN ETHYLENE OXIDE STERILIZATION PROCESS UTILIZING FLEXIBLE BAG SYSTEMS FOR THE STERILIZATION OF MEDICAL DEVICES |
| BS IEC 61832:1999 | Analyser systems. Guide to technical enquiry and bid evaluation |
| F-C-2916 Base Document:1997 | CAPS, VENT, FUEL STORAGE TANK |
| UFC 1-202-01 : 2013 | UNIFIED FACILITIES CRITERIA - HOST NATION FACILITIES IN SUPPORT OF MILITARY OPERATIONS |
| NFPA 115 : 2016 | LASER FIRE PROTECTION |
| SAE J 2258 : 2016 | LIGHT UTILITY VEHICLES |
| ASTM F 2507 : 2015 : REDLINE | Standard Specification for Recreational Airpark Design |
| NFPA 409 : 2016 | AIRCRAFT HANGARS |
| API 2023:2001 | GUIDE FOR SAFE STORAGE AND HANDLING OF HEATED PETROLEUM-DERIVED ASPHALT PRODUCTS AND CRUDE-OIL RESIDUA |
| NFPA 43A : 1990 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
| NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
| API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
| ILTVA Z130.1 : 2012 | GOLF CARS - SAFETY AND PERFORMANCE SPECIFICATIONS |
| MIL-STD-3045 Base Document:2014 | U.S. NAVY SURFACE SHIP MACHINERY ARRANGEMENTS |
| API 2009 : 2002 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 12F CHINESE : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API PUBL 1642 : 1996 | ALCOHOLS, ETHERS, AND GASOLINE-ALCOHOL AND -ETHER BLENDS - A REPORT ON FIRE-SAFETY CONSIDERATIONS AT PETROLEUM MARKETING FACILITIES |
| NFPA 1403 : 2018 | LIVE FIRE TRAINING EVOLUTIONS |
| ANSI/ASSE A10.17 : 2006 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| NFPA 1985E : 1985 | PREVENTION OF FURNACE EXPLOSIONS IN PULVERIZED COAL FIRED MULTIPLE BURNER BOILER FURNACES |
| API RP 2023 : 2001( R2006) | GUIDE FOR SAFE STORAGE AND HANDLING OF HEATED PETROLEUM-DERIVED ASPHALT PRODUCTS AND CRUDE-OIL RESIDUA |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API SPEC 12L : 2008 | SPECIFICATION FOR VERTICAL AND HORIZONTAL EMULSION TREATERS |
| API 2008 : 4ED 84 | SAFE OPERATION OF INLAND BULK PLANTS |
| ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| API RP 2021 : 2001 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| API 2021 : 2001 : R2015 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 2021 : 2001 : R2006 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| IEEE 979-2012 | IEEE Guide for Substation Fire Protection |
| ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
| NGCMA Z135 : 2004 | PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
| NFPA 81 : 1986 | FUR STORAGE, FUMIGATION AND CLEANING |
| ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| ANSI A10.16 REDLINE : 2009 | COMPARISON DOCUMENT OF A10.16 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS (FOR VERSIONS 1995 AND 2009) |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| ANSI/ASSE A10.6 : 2006 | SAFETY AND HEALTH PROGRAM REQUIREMENTS FOR DEMOLITION OPERATIONS |
| ASTM C 916 : 2014 : REDLINE | Standard Specification for Adhesives for Duct Thermal Insulation |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| ILTVA Z135 : 2012 | PERSONAL TRANSPORT VEHICLES - SAFETY AND PERFORMANCE SPECIFICATIONS |
| FM 6020 : 2016 | COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS) |
| NFPA 78 : 1989 | LIGHTNING PROTECTION CODE |
| CSA Z314.2 : 2009 | EFFECTIVE STERILIZATION IN HEALTH CARE FACILITIES BY THE ETHYLENE OXIDE PROCESS |
| SAE J 1715/2 : 2013 | BATTERY TERMINOLOGY |
| API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 340 : 1997 | LIQUID RELEASE PREVENTION AND DETECTION MEASURES FOR ABOVEGROUND STORAGE FACILITIES |
| API 2028 : 2002 : R2010 | FLAME ARRESTERS IN PIPING SYSTEMS |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
| DIN EN 14015:2005-02 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| BS EN ISO 28300:2008 | Petroleum, petrochemical and natural gas industries. Venting of atmospheric and low-pressure storage tanks |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries Reciprocating positive displacement pumps |
| UNE-EN ISO 28300:2012 | Petroleum, petrochemical and natural gas industries - Venting of atmospheric and low-pressure storage tanks (ISO 28300:2008) |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| 12/30210113 DC : 0 | BS EN ISO 28300 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| BS EN 14161 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
| EN 14015:2004 | Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and above |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| API 2005 : 1996 | SERVICE STATION SAFETY |
| API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
| NFPA 43B : 1993 | STORAGE OF ORGANIC PEROXIDE FORMULATIONS |
| ISA 12.12.03 : 2011 | STANDARD FOR PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS |
| IEEE 384-2008 REDLINE | IEEE Standard Criteria for Independence of Class 1E Equipment and Circuits |
| API 1639 : 2003 : R2012 | OWNER/OPERATOR'S GUIDE TO OPERATION AND MAINTENANCE OF VAPOR RECOVERY SYSTEMS AT GASOLINE DISPENSING FACILITIES |
| NFPA 490 : 2002 | CODE FOR THE STORAGE OF AMMONIUM NITRATE |
| ICC ICCPC INTERNATIONAL PERFORMANCE CODE : 2015 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| 10/30187796 DC : DRAFT DEC 2010 | BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| DIN EN 14161:2015-07 | ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| DIN EN ISO 28300:2008-11 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| ANSI A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| NACE SP 02 94 : 2006 | DESIGN, FABRICATION, AND INSPECTION OF STORAGE TANK SYSTEMS FOR CONCENTRATED FRESH AND PROCESS SULFURIC ACID AND OLEUM AT AMBIENT TEMPERATURES |
| ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
| MIL-C-19902 Revision C:1986 | CAPS, VENT, FUEL STORAGE TANK |
| NFPA 68 : 2018 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| API RP 2027 : 2002 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| NFPA 328 : 1992 | CONTROL OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES IN MANHOLES, SEWERS, AND SIMILAR UNDERGROUND STRUCTURES |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 484 : 2015 | COMBUSTIBLE METALS |
| ANSI/ASSE A10.17 : 2006 : R2011 | SAFE OPERATING PRACTICES FOR HOT MIX ASPHALT (HMA) CONSTRUCTION |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 2027 : 2002 : R2012 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| API 2027 : 2002 : R2007 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| API RP 1639 : 2003 | OWNER/OPERATOR'S GUIDE TO OPERATION AND MAINTENANCE OF VAPOR RECOVERY SYSTEMS AT GASOLINE DISPENSING FACILITIES |
| CSA N393:13 (R2018) | Fire protection for facilities that process, handle, or store nuclear substances |
| UNE-EN 60079-29-2:2016 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| NFPA 61D : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE MILLING OF AGRICULTURAL COMMODITIES FOR HUMAN CONSUMPTION |
| NFPA 231 : 1998 | GENERAL STORAGE |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| NFPA 124 : 1988 | FIRE PROTECTION OF DIESEL FUEL AND DIESEL EQUIPMENT IN UNDERGROUND MINES |
| NFPA 61A : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN FACILITIES MANUFACTURING AND HANDLING STARCH |
| NFPA 61C : 1989 | PREVENTION OF FIRE AND DUST EXPLOSION IN FEED MILLS |
| ASTM E 2733 : 2010 | Standard Guide for Investigation of Equipment Problems and Releases for Petroleum Underground Storage Tank Systems |
| ISA RP12.12.03 : 2002 | PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS |
| ASTM E 1260 : 2003 : R2015 | Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments |
| API 2210 : 2000 : R2015 | FLAME ARRESTERS FOR VENTS OF TANKS STORING PETROLEUM PRODUCTS |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| API 575 CHINESE : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API 1615 REDLINE : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| API 651 CHINESE : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| ANSI/ASSE A10.16 : 2009 | SAFETY REQUIREMENTS FOR TUNNELS, SHAFTS, AND CAISSONS |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| API RP 2028 : 2002 | FLAME ARRESTERS IN PIPING SYSTEMS |
| NFPA 1 : 2018 | FIRE CODE |
| NFPA 804 : 2020 | FIRE PROTECTION FOR ADVANCED LIGHT WATER REACTOR ELECTRIC GENERATING PLANTS |
| DIN EN ISO 28300:2012-02 (Draft) | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - VENTING OF ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| EN 60079-29-2:2015 | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| PIP PCECV003 : 2017 | GUIDELINES FOR APPLICATION OF REMOTELY ACTUATED ON-OFF VALVES |
| CSA/ANSI Z21.8 : 1994 : R2012 | INSTALLATION OF DOMESTIC GAS CONVERSION BURNERS |
| PIP ELEHA01 : 2016 | ENGINEERING GUIDE FOR DETERMINING ELECTRICAL AREA CLASSIFICATION |
| PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
| PIP PCEPA002 : 2016 | PROCESS ANALYZER PROJECT IMPLEMENTATION GUIDELINES |
| NFPA 505:2024 | Fire Safety Standard for Powered Industrial Trucks Including Type Designations, Areas of Use, Conversions, Maintenance, and Operations |
| NFPA 805 : 2020 | Performance-Based Standard for Fire Protection for Light Water Reactor Electric Generating Plants |
| NFPA 1936 : 2020 | Standard on Rescue Tools |
| NFPA 1620 : 2020 | Standard for Pre-Incident Planning |
| NFPA 115:2020 | Standard for laser fire protection |
| NFPA 52:2023 | Vehicular Natural Gas Fuel Systems Code |
| NFPA 600:2020 | Facility Fire Brigades |
| NFPA 400 : 2019 | Hazardous Materials Code |
| ASME B56.8 : 93(R2000) | SAFETY STANDARD FOR PERSONNEL AND BURDEN CARRIERS |
| PIP VEETA001 : 2016 | TANK SELECTION GUIDE |
| NFPA 58:2020 | Liquefied Petroleum Gas Code. |
| NFPA 664:2020 | Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities |
| API RP 575:2020 | Inspection Practices for Atmospheric and Low-pressure Storage Tanks. Fourth Edition |
| NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
| PIP PNE00003 : 2019 | Process Unit and Offsites Layout Guide |
| ICC IFC International Fire Code:2021 | International Fire Code |
| NFPA 30B:2023 | Manufacture and Storage of Aerosol Products |
| API RP 2001:2019 | Fire Protection in Refineries |
| CSA/ANSI Z21.8:1994 | INSTALLATION OF DOMESTIC GAS CONVERSION BURNERS |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| NACE SP 02 85 : 2011 | “Corrosion Control of Underground Storage Tank Systems by Cathodic Protection” |
| API 12F : 2008 | SPECIFICATION FOR SHOP WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
| API SPEC 12D : 2017 | SPECIFICATION FOR FIELD-WELDED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| CFR 33(PTS125-199) : JUL 2017 | NAVIGATION AND NAVIGABLE WATERS |
| UL 1313:3ED 2015-12-16 | Standard for Nonmetallic Safety Cans for Petroleum Products |
| NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
| NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
| NFPA 551 : 2016 | EVALUATION OF FIRE RISK ASSESSMENTS |
| CFR 40(PTS266-299) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
| NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
| NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
| NFPA 96 : 2017 | VENTILATION CONTROL AND FIRE PROTECTION OF COMMERCIAL COOKING OPERATIONS |
| NFPA 34 : 2015 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
| NFPA 329 : 2015 | HANDLING RELEASES OF FLAMMABLE AND COMBUSTIBLE LIQUIDS AND GASES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| CSA B51 : 2014 | BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE |
| UL 2208:3ED 2010-07-08 | Standard for Solvent Distillation Units |
| NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| NFPA 101 : 2018 | LIFE SAFETY CODE |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API SECURITY GUIDELINES : 2005 | SECURITY GUIDELINES FOR THE PETROLEUM INDUSTRY |
| NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
| UL 1746:3ED 2007-01-17 | Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks |
| NFPA 90A : 2018 | INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| UL 2080:1ED 2000-03-14 | Standard for Fire Resistant Tanks for Flammable and Combustible Liquids |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| NFPA 5000 : 2018 | BUILDING CONSTRUCTION AND SAFETY CODE |
| NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
| NFPA 730 : 2018 | GUIDE FOR PREMISES SECURITY |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
| NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
| CFR 49(PTS100-177) : OCT 2017 | TRANSPORTATION |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| FM 6020 : 2016 | COMPOSITE INTERMEDIATE BULK CONTAINERS (IBCS) |
| ASTM E 502 : 2007 | Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| API 1632 : 1996 | CATHODIC PROTECTION OF UNDERGROUND PETROLEUM STORAGE TANKS AND PIPING SYSTEMS |
| NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| NFPA 24 : 2016 | INSTALLATION OF PRIVATE FIRE SERVICE MAINS AND THEIR APPURTENANCES |
| NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
| NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
| NFPA 68 : 2013 | EXPLOSION PROTECTION BY DEFLAGRATION VENTING |
| NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| NFPA 32 : 2016 | DRYCLEANING FACILITIES |
| API SECURITY VULNERABILITY ASSESSMENT : 2004 | SECURITY VULNERABILITY ASSESSMENT - METHODOLOGY FOR THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API 2217A : 2009 | SAFE WORK IN INERT CONFINED SPACES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
| API 1631 : 2001 | INTERIOR LINING AND PERIODIC INSPECTION OF UNDERGROUND STORAGE TANKS |
| NFPA 306 : 2014 | CONTROL OF GAS HAZARDS ON VESSELS |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| API RP 2219 : 2016 | SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE |
| NFPA 51B : 2014 | FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK |
| API 505 : 1997 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2 |
| NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 1 : 2018 | FIRE CODE |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
| ASTM D 4207 : 1991 | Test Method for Sustained Burning of Low-Viscosity Mixtures by the Wick Test (Withdrawn 1998) |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
| API 12B : 2014 | SPECIFICATION FOR BOLTED TANKS FOR STORAGE OF PRODUCTION LIQUIDS |
| NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
| NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
| FM 6083 : 2006 | PLASTIC PLUGS FOR STEEL DRUMS |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| CFR 49(PTS178-199) : OCT 2017 | TRANSPORTATION |
| ASTM D 4359 : 1990 | TEST METHOD FOR DETERMINING WHETHER A MATERIAL IS A LIQUID OR A SOLID |
| NFPA 204 : 2015 | SMOKE AND HEAT VENTING |
| NFPA 37 : 2018 | INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| CFR 46(PTS1-40) : OCT 2017 | SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION |
| UL 2245:2ED 2006-12-28 | Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks |
| UL 263:14ED 2011-06-21 | Fire Tests of Building Construction and Materials |
| NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
| FM 6050 : 2016 | STORAGE CABINETS FOR IGNITABLE (FLAMMABLE) LIQUIDS |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| ASTM D 6469 : 2017 : REDLINE | Standard Guide for Microbial Contamination in Fuels and Fuel Systems |
| API 4589 : 1993 | Fugitive Hydrocarbon Emissions from Oil and Gas Production Operations |
| NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
| API 1621 : 2010 | BULK LIQUID STOCK CONTROL AT RETAIL OUTLETS |
| API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
| NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
| API 2218 : 2013 | FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS |
| API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
| NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
| NFPA 497 : 2017 | CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.