NF EN ISO 12100-2 : 2004 AMD 1 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
01-12-2010
12-01-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Prévention intrinsèque
4.1 Généralités
4.2 Prise en compte des facteurs géométriques et des aspects
physiques
4.3 Prise en compte des connaissances techniques générales
sur la conception des machines
4.4 Choix d'une technologie adéquate
4.5 Application du principe de l'action mécanique positive
d'un organe sur un autre
4.6 Dispositions relatives à la stabilité
4.7 Dispositions relatives à la maintenabilité
4.8 Respect des principes ergonomiques
4.9 Prévention du phénomène dangereux électrique
4.10 Prévention des phénomènes dangereux engendrés par les
équipements hydrauliques et pneumatiques
4.11 Application de mesures de prévention intrinsèque aux
systèmes de commande
4.12 Réduction à un minimum de la probabilité de défaillance
des fonctions de sécurité
4.13 Limitation de l'exposition aux phénomènes dangereux par
la fiabilité du matériel
4.14 Limitation de l'exposition aux phénomènes dangereux par
la mécanisation ou l'automatisation des opérations de
chargement (alimentation)/déchargement (évacuation)
4.15 Limitation de l'exposition aux phénomènes dangereux par
le positionnement des points de réglage et de maintenance
à l'extérieur des zones dangereuses
5 Protection et mesures de prévention complémentaires
5.1 Généralités
5.2 Choix et mise en oeuvre des protecteurs et dispositifs de
protection
5.3 Exigences relatives à la conception et à la construction
des protecteurs et des dispositifs de protection
5.4 Mesures de protection destinées à réduire les émissions
5.5 Mesures de prévention complémentaires
6 Informations pour l'utilisation
6.1 Exigences générales
6.2 Emplacement et nature des informations pour l'utilisation
6.3 Signaux et dispositifs d'avertissement
6.4 Inscriptions, signes (pictogrammes), avertissements écrits
6.5 Documents d'accompagnement (en particulier notice
d'instructions)
Bibliographie
Specifies technical principles to help designers in achieving safety in the design of machinery.
| DevelopmentNote |
Indice de classement: E09-001-2 Supersedes NF EN 292-2 (02/2004)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| BS EN ISO 12100-2 : 2003 | Identical |
| DIN EN ISO 12100-2:2004-04 | Identical |
| UNI EN ISO 12100-2 : 2009 | Identical |
| UNE-EN ISO 12100-2:2004 | Identical |
| ISO 12100-2:2003 | Identical |
| I.S. EN ISO 12100-2:2003 | Identical |
| NF ISO 20966 : 2007 | AUTOMATIC MILKING INSTALLATIONS - REQUIREMENTS AND TESTING |
| NF EN 15094 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR COLD FLAT ROLLING MILLS |
| NF EN 50416 : 2005 AMD 1 2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC CONVEYOR DISHWASHING MACHINES |
| NF EN 15268 : 2008 | PETROL FILLING STATIONS - SAFETY REQUIREMENTS FOR THE CONSTRUCTION AND SUBMERSIBLE PUMP ASSEMBLIES |
| NF EN 50050 : 2007 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT |
| NF EN 81-43 : 2009 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 43: LIFTS FOR CRANES |
| NF EN 12385-3 : 2005 + A1 2008 | STEEL WIRE ROPES - SAFETY - PART 3: INFORMATION FOR USE AND MAINTENANCE |
| NF EN ISO 11553-1 : 2009 | SAFETY OF MACHINERY - LASER PROCESSING MACHINES - PART 1: GENERAL SAFETY REQUIREMENTS |
| NF EN 676 : 2004 + A2 2008 | AUTOMATIC FORCED DRAUGHT BURNERS FOR GASEOUS FUELS |
| NF EN 14677 : 2008 | SAFETY OF MACHINERY - SECONDARY STEELMAKING - MACHINERY AND EQUIPMENT FOR TREATMENT OF LIQUID STEEL |
| NFS 52 510 : 2008 XP | QUAD BIKES (ATVS) - SAFETY REQUIREMENTS AND TEST METHODS |
| NF EN 61310-3 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 3: REQUIREMENTS FOR THE LOCATION AND OPERATION OF ACTUATORS |
| NF EN 14753 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR MACHINERY AND EQUIPMENT FOR THE CONTINUOUS CASTING OF STEEL |
| NF EN 81-71 : 2005 + A1 2007 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PARTICULAR APPLICATIONS TO PASSENGER AND GOODS PASSENGER LIFTS - PART 71: VANDAL RESISTANT LIFTS |
| NF EN 15166 : 2009 | FOOD PROCESSING MACHINERY - AUTOMATIC BACK SPLITTING MACHINES OF BUTCHERY CARCASSES - SAFETY AND HYGIENE REQUIREMENTS |
| XP S61 547 : 2007 XP | FIREFIGHTING EQUIPMENT - PARTICULAR COMPLEMENTARY DISPOSITIONS FOR TURNTABLE LADDERS |
| NF EN 1114-3 : 2001 + A1 2008 | PLASTICS AND RUBBER MACHINES - EXTRUDERS AND EXTRUSION LINES - PART 3: SAFETY REQUIREMENTS FOR HAUL-OFFS |
| NF EN 1672-2 : 2005 + A1 2009 | FOOD PROCESSING MACHINERY - BASIC CONCEPTS - PART 2: HYGIENE REQUIREMENTS |
| NF EN 528 : 2008 | RAIL DEPENDENT STORAGE AND RETRIEVAL EQUIPMENT - SAFETY REQUIREMENTS |
| NF EN 13862 : 2002 + A1 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| NF EN 12418 : 2000 + A1 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| NF EN 62061 : 2005 AMD 2 2015 | SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS |
| NF EN 15164 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR CHAIN AND BELT SLOTTING MACHINES |
| NFE 61 120 : 2007 | PRODUCTION SYSTEMS INCLUDING MANIPULATING INDUSTRIAL ROBOTS - SAFETY REQUIREMENTS FOR ROBOT SYSTEMS |
| XP S61 512 : 2006 XP | FIREFIGHTING AND RESCUE SERVICE VEHICLES - FIREFIGHTING AND RESCUE TENDERS - ROAD RESCUE WATER TENDER TYPES FPTLSR AND FPTSR |
| NF EN ISO 8230-1 : 2008 | SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 1: COMMON SAFETY REQUIREMENTS |
| NF EN 13411-7 : 2006 + A1 2008 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| NF EN 12301 : 2000 + A1 2008 | PLASTICS AND RUBBER MACHINES - CALENDARS - SAFETY REQUIREMENTS |
| NF EN 13155 : 2003 + A2 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NF EN 1010-5 : 2005 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF PRINTING AND PAPER CONVERTING MACHINES - PART 5: MACHINES FOR THE PRODUCTION OF CORRUGATED BOARD AND MACHINES FOR THE CONVERSION OF FLAT AND CORRUGATED BOARD |
| NF EN 60335 2-92 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-92: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED MAINS-OPERATED LAWN SCARIFIES AND AERATORS |
| UTEC 79 160 : 2008 | SAFETY OF MACHINERY - APPLICATION OF PROTECTIVE EQUIPMENT TO DETECT THE PRESENCE OF PERSONS |
| XP CEN/TS 13778 : 2005 XP | MOBILE DEMOLITION MACHINERY - SAFETY REQUIREMENTS |
| NF CEN/TS 13001-3-1 : 2005 XP | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| NF EN 703 : 2004 + A1 2009 | AGRICULTURAL MACHINERY - SILAGE LOADING, MIXING AND/OR CHOPPING AND DISTRIBUTING MACHINES - SAFETY |
| NF EN 15061 : 2007 + A1 2009 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR STRIP PROCESSING LINE MACHINERY AND EQUIPMENT |
| NF EN 81-40 : 2008 | SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - SPECIAL LIFTS FOR THE TRANSPORT OF PERSONS AND GOODS - PART 40: STAIRLIFTS AND INCLINED LIFTING PLATFORMS INTENDED FOR PERSONS WITH IMPAIRED MOBILITY |
| NF ISO 5707 : 2007 | MILKING MACHINE INSTALLATIONS - CONSTRUCTION AND PERFORMANCE |
| NF EN 1829-2 : 2008 | HIGH-PRESSURE WATER JET MACHINES - SAFETY REQUIREMENTS - PART 2: HOSES, HOSE LINES AND CONNECTORS |
| NF EN 60335-2-77 : 2011 | SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 2-77: PARTICULAR REQUIREMENTS FOR PEDESTRIAN-CONTROLLED WALK-BEHIND ELECTRICALLY POWERED LAWN MOWERS |
| NF EN 61310-2 : 2008 | SAFETY OF MACHINERY - INDICATION, MARKING AND ACTUATION - PART 2: REQUIREMENTS FOR MARKING |
| NF EN 15162 : 2008 | MACHINES AND PLANTS FOR MINING AND TOOLING OF NATURAL STONE - SAFETY - REQUIREMENTS FOR GANG SAWS |
| NF ISO 18652 : 2007 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE |
| NFU 66 053 : 2006 | EQUIPMENT FOR SLAUGHTERHOUSES - SLAUGHTERING PENS - SAFETY AND HYGIENE REQUIREMENTS |
| NF EN 15093 : 2008 | SAFETY OF MACHINERY - SAFETY REQUIREMENTS FOR HOT FLAT ROLLING MILLS |
| NF EN 1501-3 : 2008 | REFUSE COLLECTION VEHICLES AND THEIR ASSOCIATED LIFTING DEVICE - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 3: FRONT LOADED REFUSE COLLECTION VEHICLES |
| NF EN 415-8 : 2008 | SAFETY OF PACKAGING MACHINES - PART 8: STRAPPING MACHINES |
| NF EN 12012-1 : 2007 + A1 2008 | PLASTICS AND RUBBER MACHINES - SIZE REDUCTION MACHINES - PART 1: SAFETY REQUIREMENTS FOR BLADE GRANULATORS |
| NF EN 15000 : 2008 | SAFETY OF INDUSTRIAL TRUCKS - SELF PROPELLED VARIABLE REACH TRUCKS - SPECIFICATION, PERFORMANCE AND TEST REQUIREMENTS FOR LONGITUDINAL LOAD MOMENT INDICATORS AND LONGITUDINAL LOAD MOMENT LIMITERS |
| NF EN 1218-2 : 2004 + A1 2010 | SAFETY OF WOODWORKING MACHINES - TENONING MACHINES - PART 2: DOUBLE END TENONING AND/OR PROFILING MACHINES FED BY CHAIN OR CHAINS |
| NF EN 692 : 2006 + A1 2009 | MACHINE TOOLS - MECHANICAL PRESSES - SAFETY |
| NF EN 13814 : 2007 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.