NF EN 60464-2 : 2002 AMD 1 2006
Current
The latest, up-to-date edition.
VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
12-01-2013
AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Définitions
4 Observations générales sur les méthodes d'essai
5 Méthodes d'essai pour les vernis non secs et/ou non
durcis
5.1 Point éclair
5.2 Masse volumique
5.3 Viscosité
5.4 Teneur en matière non volatile
5.5 Aptitude à la dilution
5.6 Stabilité du vernis dans un récipient ouvert
5.7 Séchage et/ou durcissement en couche épaisse
5.8 Effet du vernis sur des fils de bobinage émaillés
6 Méthodes d'essai pour des vernis secs et/ou durcis
6.1 Eprouvettes
6.2 Propriétés mécaniques
6.3 Propriétés thermiques
6.4 Propriétés chimiques
6.5 Propriétés électriques
Annexe ZA - Références normatives à d'autres publications
internationales avec les publications
européennes correspondantes
Figure 1 - Dispositif d'essai pour la résistivité
transversale
Figure 2 - Exemple pour la disposition des électrodes
Tableau 1 - Etat de la partie supérieure
Tableau 2 - Etat du fond
Tableau 3 - Etat de la partie intérieure
Describes methods of test to be used for testing varnishes used for electrical insulation.
| DevelopmentNote |
Indice de Classement: C26-942 Together with NF EN 60464-1, supersedes NFC 26 945. (07/2003)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SN EN 60464-2 : AMD 1 2006 | Identical |
| EN 60464-2:2001/A1:2006 | Identical |
| UNE-EN 60464-2:2003 | Identical |
| IEC 60464-2:2001+AMD1:2006 CSV | Identical |
| DIN EN 60464-2 : 2006 COR 1 2007 | Identical |
| I.S. EN 60464-2:2002 | Identical |
| NBN EN 60464-2 : 2002 AMD 1 2006 | Identical |
| BS EN 60464-2:2001 | Identical |
| NF EN 60455 3-5 : 2006 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 5: UNSATURATED POLYESTER BASED IMPREGNATING RESINS |
| NF EN 60464 3-2 : 2002 AMD 1 2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 2: HOT CURING IMPREGNATING VARNISHES |
| NF EN 60464 3-1 : 2002 AMD 1 2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: AMBIENT CURING FINISHING VARNISHES |
| IEC 60243-1:2013 | Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies |
| NFC 01 212 : 1990 | ELECTROTECHNICAL VOCABULARY - CHAPTER 212: INSULATING SOLIDS, LIQUIDS AND GASES |
| IEC 60250:1969 | Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths |
| NF EN ISO 3251 : 2008 | PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE-MATTER CONTENT |
| NFC 26 285 : 1996 | TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELED WIRE SUBSTRATE |
| NFC 20 710 : 1989 | ENVIRONMENTAL TESTING - TEST METHODS - TEST J AND GUIDANCE: MOULD GROWTH |
| NF EN 61099 : 2011 | INSULATING LIQUIDS - SPECIFICATION FOR UNUSED SYNTHETIC ORGANIC ESTERS FOR ELECTRICAL PURPOSES |
| IEC 60050-212:2010 | International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
| NFC 26 230 : 1970 | METHODS OF TESTING INSULATING MATERIALS - RECOMMENDED METHODS FOR THE DETERMINATION OF THE PERMITTIVITY AND DIELECTRIC DISSIPATION FACTOR OF ELECTRICAL INSULATING MATERIAL AT POWER, AUDIO AND RADIO FREQUENCIES |
| NF EN 456 : 1991 | PAINTS, VARNISHES AND RELATED PRODUCTS - DETERMINATION OF FLASHPOINT - RAPID EQUILIBRIUM METHOD |
| IEC 61099:2010 | Insulating liquids - Specifications for unused synthetic organic esters for electrical purposes |
| NF EN 60641 3-1 : 2008 | PRESSBOARD AND PRESSPAPER FOR ELECTRICAL PURPOSES - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 1: REQUIREMENTS FOR PRESSBOARD, TYPES B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 AND B.6.1 |
| NF EN ISO 2578 : 1998 | PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT |
| NF EN ISO 2555 : 1999 | PLASTICS - RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD |
| HD 429 : 200S1 | METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| NF EN ISO 2078 : 1995 | TEXTILE GLASS - YARNS - DESIGNATION |
| NF EN ISO 2808 : 2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| NF EN ISO 3219 : 1994 | PLASTICS - POLYMERS/RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF VISCOSITY USING A ROTATIONAL VISCOMETER WITH DEFINED SHEAR RATE |
| IEC 60093:1980 | Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
| NF EN ISO 2431 : 2011 | PAINTS AND VARNISHES - DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS |
| NF EN ISO 1513 : 2010 | PAINTS AND VARNISHES - EXAMINATION AND PREPARATION OF TEST SAMPLES |
| IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
| NFC 26 226 : 1991 | METHODS OF TEST FOR ELECTRIC STRENGTH OF SOLID INSULATING MATERIALS - TESTS AT POWER FREQUENCIES |
| EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
| EN 60243-1:2013 | ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013) |
| HD 323.2.10 : 200S3 | BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST J AND GUIDANCE: MOULD GROWTH |
| IEC 60641-3-1:2008 | Pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.0.3, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.5.3 and B.6.1 |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
| ISO 1144:2016 | Textiles Universal system for designating linear density (Tex System) |
| NF EN ISO 291 : 2008 | PLASTICS - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| NF EN ISO 15528 : 2013 | PAINTS, VARNISHES AND RAW MATERIALS FOR PAINTS AND VARNISHES - SAMPLING |
| NFC 26 215 : 1982 | METHODS OF TESTING INSULATING MATERIALS - METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS |
| IEC 61033:1991 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| NF EN ISO 1514 : 2016 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| ISO 558:1980 | Conditioning and testing — Standard atmospheres — Definitions |
| IEC 60851-4:2016 | Winding wires - Test methods - Part 4: Chemical properties |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.