NF EN 187103 : 2003
Current
The latest, up-to-date edition.
FAMILY SPECIFICATION - OPTICAL FIBRE CABLES FOR INDOOR APPLICATIONS
12-01-2013
1 Domaine d'application
2 Généralités
3 Références normatives
4 Symboles et abréviations
4.1 Symboles
4.2 Abréviations
5 Spécification de famille pour câbles de télécommunication
optique pour application intérieure (spécification
particulière cadre et prescriptions minimales)
5.1 Description de câble
5.2 Fibres optiques
5.2.1 Fibre optique unimodale à dispersion non-décalée
(b1.1)
5.2.2 Fibre optique unimodale à dispersion décalée (b1.2)
5.2.3 Fibre optique unimodale à dispersion décalée non
nulle (b4)
5.2.4 Précisions sur les prescriptions de famille
5.3 Elément de câble
5.3.1 Essais applicables
5.3.2 Précision sur les prescriptions de famille
5.3.3 Essais complémentaires et prescriptions
5.4 Construction de câble
5.4.1 Essais applicables
5.4.2 Précisions concernant les prescriptions de famille
5.5 Installation et conditions de fonctionnement
5.6 Essais mécaniques et d'environnement
5.6.1 Essais applicables
5.6.2 Précisions sur les prescriptions de famille et
conditions d'essai pour essais des câbles à fibres
optiques
Covers optical cables for telecommunication application to be used indoor.
DevelopmentNote |
Indice de Classement: C93-859-3 Supersedes NFC 93 859-3. (09/2003)
|
DocumentType |
Standard
|
PublisherName |
Association Francaise de Normalisation
|
Status |
Current
|
Supersedes |
Standards | Relationship |
SN EN 187103 : 2003 | Identical |
BS EN 187103:2003 | Identical |
EN 187103:2003 | Identical |
DIN EN 187103 : 2003 | Identical |
NEN EN 187103 : 2003 | Identical |
NBN EN 187103 : 2003 | Identical |
I.S. EN 187103:2003 | Identical |
IEC 60794-3:2014 | Optical fibre cables - Part 3: Outdoor cables - Sectional specification |
IEC 60794-1:1996 | Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1) |
IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
NF EN 60811-4-2 : 2004 | INSULATING AND SHEATHING MATERIALS OF ELECTRIC AND OPTICAL CABLES - COMMON TEST METHODS - PART 4-2: METHODS SPECIFIC TO POLYETHYLENE AND POLYPROPYLENE COMPOUNDS - TENSILE STRENGTH AND ELONGATION AT BREAK AFTER CONDITIONING AT ELEVATED TEMPERATURE - WRAPPING TEST AFTER CONDITIONING AT ELEVATED TEMPERATURE - WRAPPING TEST AFTER THERMAL AGEING IN AIR - MEASUREMENT OF MASS INCREASE - LONG-TERM |
EN 188102:1995 | Family Specification: Single-mode dispersion shifted (B2) optical fibre |
IEC 60754-1:2011 | Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content |
EN 188000 : 1992 | GENERIC SPECIFICATION FOR OPTICAL FIBRES |
EN 187000 : 92 AMD 1 95 | GENERIC SPECIFICATION: OPTICAL FIBRE CABLES |
HD 624.7 : 200S1 | MATERIALS USED IN COMMUNICATION CABLES - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUND |
IEC 60754-2:2011 | Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity |
IEC 60811-4-2:2004 | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation |
IEC 60811-5-1:1990+AMD1:2003 CSV | Insulating and sheathing materials of electric and optical cables - Common test methods - Part 5-1: Methods specific to filling compounds - Drop-point - Separation of oil - Lower temperature brittleness - Total acid number - Absence of corrosive components - Permittivity at 23 °C - DC resistivity at 23 °C and 100 °C |
IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
EN 188101:1995 | Family Specification: Single-mode dispersion unshifted (B1.1) optical fibre |
IEC 61034-1:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under defined conditions - Part 1: Test apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.