NF EN 13353 : 2009 + A1 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SOLID WOOD PANELS (SWP) - REQUIREMENTS
30-01-2023
12-01-2013
Avant-propos
1 Domaine d'application
2 Références normatives
3 Termes, définitions et classes
3.1 Termes et définitions
3.2 Classes des bois panneautés en fonction de
leur destination
4 Exigences
4.1 Tolérances dimensionnelles
4.2 Teneur en humidité à la livraison
4.3 Qualité du collage
4.4 Durabilité biologique
4.5 Caractéristiques mécaniques
4.6 Dégagement de formaldéhyde
5 Caractéristiques complémentaires
6 Vérification de la conformité
6.1 Généralités
6.2 Controle externe
6.3 Controle de la production en usine
7 Marquage
7.1 Panneaux mis sur le marché interne de l'Espace
Économique Européen pour des usages en construction
7.2 Autres panneaux
Annexe A (normative) Caractéristiques pour applications
structurelles et non structurelles
Bibliographie
Describes requirements for solid wood panels for use in dry, humid and exterior conditions.
| DevelopmentNote |
Indice de classement: B54-178. (11/2003) PR NF EN 13353 June 2007. (06/2007) 2009 Edition Re-Issued in July 2011 & incorporates AMD 1 2011. (07/2011)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| ONORM EN 13353 : 2011 | Identical |
| UNE-EN 13353:2009 | Identical |
| BS EN 13353 : 2008 | Identical |
| NBN EN 13353 : 2009 + A1 2011 | Identical |
| I.S. EN 13353:2008 | Identical |
| NS EN 13353 : 2008 + A1 2011 | Identical |
| EN 13353:2008+A1:2011 | Identical |
| DIN EN 13353:2011-07 | Identical |
| SN EN 13353 : 2008 + A1 2011 | Identical |
| NEN EN 13353 : 2008 + A1 2011 | Identical |
| UNI EN 13353 : 2011 | Identical |
| NF EN 12369-3 : 2008 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| NF CEN/TS 13354 : 2005 XP | SOLID WOOD PANELS - BONDING QUALITY - TEST METHOD |
| NF EN 13354 : 2009 | SOLID WOOD PANELS (SWP) - BONDING QUALITY - TEST METHOD |
| EN 13017-1:2000 | Solid wood panels - Classification by surface appearance - Part 1: Softwood |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 596:1995 | Timber structures - Test methods - Soft body impact test of timber framed walls |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| EN 1058:2009 | Wood-based panels - Determination of characteristic 5-percentile values and characteristic mean values |
| EN 13446:2002 | Wood-based panels - Determination of withdrawal capacity of fasteners |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 13017-2:2000 | Solid wood panels - Classification by surface appearance - Part 2: Hardwood |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 13354:2008 | Solid wood panels (SWP) - Bonding quality - Test method |
| EN 12871:2013 | Wood-based panels - Determination of performance characteristics for load bearing panels for use in floors, roofs and walls |
| EN 12275:2013 | Mountaineering equipment - Connectors - Safety requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.