NASA STD 8719.9 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
LIFTING STANDARD
31-07-2024
01-01-2015
DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS AND ACRONYMS
4. GENERAL LDE REQUIREMENTS
5. OVERHEAD CRANES
6. MOBILE CRANES AND DERRICKS
7. HOISTS AND WINCHES
8. HOIST-SUPPORTED PERSONNEL LIFTING DEVICES
9. MOBILE AERIAL PLATFORMS
10. HIGH LIFT INDUSTRIAL TRUCKS
11. LOAD POSITIONING AND LOAD MEASURING DEVICES
12. JACKS
13. HOOKS
14. SLINGS AND RIGGING HARDWARE
APPENDIX A: NATIONAL AERONAUTICS AND SPACE ADMINISTRATION
ALTERNATE STANDARD FOR SUSPENDED LOAD OPERATIONS
APPENDIX B: SUMMARY OF CRITICAL LIFT REQUIREMENTS
APPENDIX C: LDEM ROLES, APPROVALS, AND SPECIAL PERMISSIONS
Specifies NASA-specific requirements and references applicable OSHA and national consensus standards (NCS).
| DevelopmentNote |
Supersedes NSS/GO 1740.9B. (12/2003)
|
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NASA STD 8719.10 : 2006 | UNDERWATER FACILITY AND NON-OPEN WATER OPERATIONS |
| NASA STD 8709.22 : 2010 | SAFETY AND MISSION ASSURANCE ACRONYMS, ABBREVIATIONS, AND DEFINITIONS |
| NASA STD 5005(INT) : 2007 | THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC STD Z 0004 : 2002 | STRUCTURAL DESIGN, STANDARD FOR |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA STD 6008(INT) : 2006 | NASA FASTENER MANAGEMENT AND CONTROL PRACTICES |
| NASA MSFC STD 3598 : 2015 | STANDARD FOR FOREIGN OBJECT DAMAGE/FOREIGN OBJECT DEBRIS (FOD) PREVENTION |
| ASME B30.20 : 2013 | Below-the-Hook Lifting Devices (B30.20 - 2013) |
| ASME B30.9 : 2014 | SLINGS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.25 : 2013 | SCRAP AND MATERIAL HANDLERS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASME B30.22 : 2016 | ARTICULATING BOOM CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.24 : 2013 | Container Cranes (B30.24 - 2013) |
| SIA A92.6 : 2006(R2014) | SELF-PROPELLED ELEVATING WORK PLATFORMS |
| SAE J 765 : 1990 | CRANE LOAD STABILITY TEST CODE |
| SIA A92.3 : 2006(R2014) | MANUALLY PROPELLED ELEVATING WORK PLATFORMS |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| ASME B30.29 : 2012 | SELF-ERECTING TOWER CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| NAS410:2003 | NAS CERTIFICATION & QUALIFICATION OF NONDESTRUCTIVE TEST PERSONNEL |
| ASME B30.2 : 2016 | OVERHEAD AND GANTRY CRANES (TOP RUNNING BRIDGE, SINGLE OR MULTIPLE GIRDER, TOP RUNNING TROLLEY HOIST) - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.26 : 2015 | Rigging Hardware (B30.26 - 2015)<br> |
| CFR 29(PTS1920-END) : 1986 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASME B30.28 : 2015 | BALANCE LIFTING UNITS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| SAE J 1063 : 2013 | CANTILEVERED BOOM CRANE STRUCTURES - METHOD OF TEST |
| ASME HST 2 : 2014 | PERFORMANCE STANDARD FOR HAND CHAIN MANUALLY OPERATED CHAIN HOISTS |
| ASME B30.16 : 2017 | OVERHEAD UNDERHUNG AND STATIONARY HOISTS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.19 : 2016 | CABLEWAYS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME HST 1 : 2012 | PERFORMANCE STANDARD FOR ELECTRIC CHAIN HOISTS |
| ASME B30.7 : 2016 | Base-Mounted Drum Hoists (B30.7 - 2006) |
| ASNT CP 189 : 2016 | QUALIFICATION AND CERTIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ASME B30.5 : 2014 | MOBILE AND LOCOMOTIVE CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME HST 5 : 2014 | PERFORMANCE STANDARD FOR AIR CHAIN HOISTS |
| SIA A92.2 : 2015 | VEHICLE MOUNTED ELEVATING AND ROTATING AERIAL PLATFORM |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASME BTH 1 : 2017 | DESIGN OF BELOW-THE-HOOK LIFTING DEVICES |
| ASME B30.4 : 2015 | PORTAL AND PEDESTAL CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.8 : 2015 | FLOATING CRANES AND FLOATING DERRICKS |
| ASME B30.13 : 2017 | STORAGE/RETRIEVAL (S/R) MACHINES AND ASSOCIATED EQUIPMENT - SAFETY STANDARD FOR CABLEWAYS, CRANES, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B30.14 : 2015 | SIDE BOOM TRACTORS - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| ASME B56.1 : 2004 | SAFETY STANDARD FOR LOW LIFT AND HIGH LIFT TRUCKS |
| ASME B30.11 : 2010 | MONORAILS AND UNDERHUNG CRANES - SAFETY STANDARD FOR CABLEWAYS, CRANES, DERRICKS, HOISTS, HOOKS, JACKS, AND SLINGS |
| SIA A92.5 : 2006(R2014) | BOOM-SUPPORTED ELEVATING WORK PLATFORMS |
| NASA STD 8709.20 : 2010 | MANAGEMENT OF SAFETY AND MISSION ASSURANCE TECHNICAL AUTHORITY (SMA TA) REQUIREMENTS |
| CFR 29(PTS1927-END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASME B30.17 : 2015 | Cranes and Monorails (With Underhung Trolley or Bridge) |
| DIN EN 13000:2014-11 | CRANES - MOBILE CRANES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.