NACE SP 01 08 : 2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
CORROSION CONTROL OF OFFSHORE STRUCTURES BY PROTECTIVE COATINGS
Available format(s)
Hardcopy , PDF
Withdrawn date
27-07-2016
Language(s)
English
Published date
01-01-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. General
2. Definitions
3. Protective Coating Systems
4. Typical Generic Protective Coating Systems
5. Qualification Testing of Coating Systems
6. Surface Preparation
7. Coating Materials and Application
8. Quality Assurance and Control
9. Coating Repair
10. Flange Corrosion Control
11. Fastener Coatings
12. Pipe Support Corrosion Control
13. Corrosion Control of Small-Bore Stainless Steel Tubing
14. Health, Safety, and Environment
References
Describes guidelines for establishing minimum requirements for the corrosion protective coatings on steel offshore structures associated with oil and gas production, and on the associated handling equipment.
| Committee |
STG 02
|
| DocumentType |
Standard
|
| ISBN |
1-57590-218-4
|
| Pages |
33
|
| PublisherName |
National Association of Corrosion Engineers
|
| Status |
Withdrawn
|
| API 2SIM : 2014 | STRUCTURAL INTEGRITY MANAGEMENT OF FIXED OFFSHORE STRUCTURES |
| CEN ISO/TS 16530-2:2015 | Well integrity - Part 2: Well integrity for the operational phase (ISO/TS 16530-2:2014) |
| S.R. CEN ISO/TS 16530-2:2015 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| ABS 0195 : 2015 COR 2018 | GUIDE FOR BUILDING AND CLASSING FLOATING OFFSHORE WIND TURBINE INSTALLATIONS |
| DIN CEN ISO/TS 16530-2;DIN SPEC 91087:2016-05 | WELL INTEGRITY - PART 2: WELL INTEGRITY FOR THE OPERATIONAL PHASE (ISO/TS 16530-2:2014) |
| API 2A WSD : 2014 | PLANNING, DESIGNING, AND CONSTRUCTING FIXED OFFSHORE PLATFORMS - WORKING STRESS DESIGN |
| PD CEN ISO/TS 16530-2:2015 | Well integrity Well integrity for the operational phase |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 11126-9:1999 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 9: Staurolite |
| SSPC-SP 12 : 2002 | SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| NACE SP 01 88 : 2006 | DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES |
| ISO 3549:1995 | Zinc dust pigments for paints — Specifications and test methods |
| ASTM A 123/A123M : 2017 : REDLINE | Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products |
| ISO 11124-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit |
| ISO 11126-8:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 8: Olivine sand |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| SSPC-SP 11 : 2012 | POWER-TOOL CLEANING TO BARE METAL |
| ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
| CFR 40(PTS260-265) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 4285 : 1983 : R2018 | Standard Test Method for Indicating Oil or Water in Compressed Air |
| NACE RP 01 76 : 2003 | CORROSION CONTROL OF STEEL FIXED OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| NACE SP 01 76 : 2007 | CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| NACE TM 04 04 : 2004 | Standard Test Method Offshore Platform Atmospheric and Splash Zone New Construction Coating System Evaluation<br> |
| ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
| NACE 6G198 : 0 | WET ABRASIVE BLAST CLEANING |
| NACE TM 01 04 : 2004 | OFFSHORE PLATFORM BALLAST WATER TANK COATING SYSTEM EVALUATION |
| NACE 4 : 2007 | BRUSH-OFF BLAST CLEANING |
| NACE 12 : 2003 | SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM, ZINC, AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| NACE 5 : 2002 | SURFACE PREPARATION AND CLEANING OF METALS BY WATERJETTING PRIOR TO RECOATING |
| ISO 8502-6:2006 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method |
| ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
| NACE TM 03 04 : 2004 | OFFSHORE PLATFORM ATMOSPHERIC AND SPLASH ZONE MAINTENANCE COATING SYSTEM EVALUATION |
| NACE TM 02 04 : 2004 | EXTERIOR PROTECTIVE COATINGS FOR SEAWATER IMMERSION SERVICE |
| SSPC-SP 5 : 2015 | WHITE METAL BLAST CLEANING |
| ASTM D 1475 : 2013 : REDLINE | Standard Test Method For Density of Liquid Coatings, Inks, and Related Products |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| NACE RP 02 87 : 2002 | FIELD MEASUREMENT OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL SURFACES USING A REPLICA TAPE |
| ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
| ASTM B 479 : 2006 | Standard Specification for Annealed Aluminum and Aluminum-Alloy Foil for Flexible Barrier, Food Contact, and Other Applications (Withdrawn 2015) |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| SSPC-SP 7 : 2015 | BRUSH-OFF BLAST CLEANING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.