MIL-STD-1560 Revision C:2015
Current
Current
The latest, up-to-date edition.
Insert Arrangements for MIL-DTL-38999, MIL-DTL-27599 and SAE-AS29600 Series A Electrical Circular Connectors
Available format(s)
PDF
Language(s)
English
Published date
11-02-2015
Publisher
£15.19
Excluding VAT
FOREWORD
SUMMARY OF CHANGE 1 MODIFICATIONS
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
CONCLUDING MATERIAL
Includes insert arrangements for use with MIL-DTL-38999 series I, II, III and IV; MIL-DTL-27599 series I and II; and SAE-AS29600 series A, circular, electrical connectors.
| DocumentType |
Standard
|
| Pages |
272
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This standard covers insert arrangements for use with MIL-DTL-38999 series I, II, III and IV; MIL-DTL-27599 series I and II; and SAE-AS29600 series A, circular, electrical connectors.
| SAE AIR 4004 : 2015 | GUIDE FOR INSTALLATION OF ELECTRICAL WIRE AND CABLE ON AIRCRAFT LANDING GEAR |
| SAE AIR6114 | Interface for Micro Munition (IMM) Handbook |
| MIL-STD-242-8 Revision G:1982 | ELECTRONIC EQUIPMENT PARTS SELECTED STANDARDS CONNECTORS AND SOCKETS - PART 8 (NO S/S DOCUMENT) |
| 16/30337938 DC : 0 | BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| MIL C 27599 : B | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENTAL RESISTANT, SOLDER CONTACTS GENERAL SPECIFICATION FOR |
| MIL-STD-1678-6 Revision A:2016 | Fiber Optic Cabling Systems Requirements and Measurements (Part 6: Parts and Support Equipment Commonality and Standardization Requirements) (Part 6 of 6 Parts) |
| MS27515 Revision C:2002 | Connectors, Receptacle, Electrical, Crimp Type, Back Panel, Wall Mounting Flange, Series I |
| MS27467 Revision M:2012 | Connectors, Plug, Electrical, Straight, Crimp Type, Bayonet Coupling, Series I |
| MS27480 Revision H:2012 | Connectors, Plug, Electrical, Straight, Crimp Type, Bayonet Coupling, Series II |
| MIL-DTL-38999-41 Revision B:2010 | Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric |
| 09/30196635 DC : 0 | BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| MIL-DTL-38999-35 Revision D:2008 | Connectors, Receptacle, Electrical, Circular, Breakaway, Wall Mounting Flange, Removable Crimp Contacts, Sockets, Series III, Shell Size 25, Metric |
| ARINC 791-1 : 2014 | MARK 1 AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM - PART 1: PHYSICAL INSTALLATION AND AIRCRAFT INTERFACES |
| IEC PAS 60092-510:2009 | Electrical installations in ships - Part 510: Special features - High-voltage shore connection systems |
| I.S. EN 3645-001:2015 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| MIL-STD-1353 Revision C:2014 | Electrical Connectors, Plug-in Sockets and Associated Hardware, Selection and Use of |
| DEFSTAN 00-69(PT2)/1(1998) : 1998 | AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM - PART 2: DESIGN PRINCIPLES AND PRACTICES FOR, AND GUIDE TO, THE IMPLEMENTATION OF THE AIRCRAFT/STORE ELECTRICAL INTERCONNECTION SYSTEM |
| 16/30353142 DC : 0 | BS EN 3645-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGRES C OR 200 DEGRES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| MS20027 Revision F:2010 | Connectors, Line Plug, Electrical, Solder Type, Bayonet Coupling, Class T, Series I |
| MIL-DTL-38999-34 Revision D:2008 | Connectors, Receptacle, Electrical, Circular, Breakaway, Jam-Nut Mounting, Removable Crimp Contacts, Sockets, Series III, Shell Size 25, Metric |
| MIL-DTL-83538-1 Revision D:2008 | Connectors and Accessories, Electrical, Circular, Umbilical, Receptacle, Store Assembly, Removable Crimp Contacts, Sockets, for MIL STD-1760 Applications (Metric) |
| MS27334 Revision E:2010 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Solder Type, Bayonet Coupling, Classes P and T, Series II |
| MIL-DTL-38999-25 Revision C:2011 | Connector, Electrical, Circular, Threaded, Receptacle, Solder Mounting, Hermetic, Hermetic Solder Contacts, Series III, Metric |
| MS27505 Revision G:2002 | Connectors, Receptacle, Electrical, Back Panel, Box Mounting Flange, Crimp Type, Bayonet Coupling, Series I |
| MS27499 Revision J:2008 | Connectors, Receptacle, Electrical, Box Mounting Flange, Crimp Type, Bayonet Coupling, Series II |
| SAE AS29600B | Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification For |
| MIL C 38999 : J | CONNECTOR, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT (BAYONET THREADED & BREECH COUPLING) ENVIRONMENT RESISTANT, REMOVABLE CRIMP & HERMETIC SOLDER CONTACTS |
| MS27335 Revision E:2010 | Connectors, Receptacle, Electrical, Box, Flange Mount, Solder Type, Bayonet Coupling, Class T, Series II |
| MIL-DTL-38999-49 Revision B:2014 | Connectors, Electrical, Circular, Receptacle, In-Line Cable, Breech Coupling, Removable Crimp Contacts, Series IV, Metric |
| MS27469 Revision H:2011 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Solder Type, Hermetic Seal, Series I |
| SAE AS4764A | Validation Methods for MIL-STD-1760 Aircraft Station Interfaces |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-DTL-38999-31 Revision E:2014 | Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Shell Size 25, Series III, Metric |
| MIL-DTL-83538-4 Revision D:2015 | Connectors and Accessories, Electrical, Circular, Umbilical, Receptacle, Launcher Assembly, Removable Crimp Contacts, Sockets for MIL-STD-1760 Applications (METRIC) |
| SAE AS42701 | Validation Methods For MIL-STD-1760D Mission Stores |
| MIL-DTL-83538-3 Revision D:2015 | Connectors and Accessories, Electrical, Circular, Umbilical, Adapter, Buffer Plug, Nonremovable Pin Contacts, for MIL-STD-1760 Applications (METRIC) |
| MS27479 Revision G:2012 | Connector, Receptacle, Electrical, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series II |
| MS27662 Revision E:2002 | Connectors, Receptacle, Electrical, Thru-Bulkhead Mounting, Bayonet Coupling, Series I |
| MIL-HDBK-527 Base Document:2017 | Guidance for Intermittent Fault Emulator (IFE) |
| MS27508 Revision H:2008 | Connectors, Receptacle, Electrical, Back Panel, Box Mounting Flange, Crimp Type, Bayonet Coupling, Series II |
| MS27471 Revision G:2012 | Connectors, Receptacle, Electrical, Solder Mounting, Solder Type, Hermetic Seal, Series I |
| MIL-DTL-38999-61 Base Document:2004 | Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Fiber Optic Termini, Tight Tolerance, Series III, Shell Size 25, Metric |
| MIL-DTL-83538 Revision D:2006 | Connectors and Accessories, Electrical, Circular, Umbilical, Environment Resistant, Removable Crimp Contacts for MIL-STD-1760 Applications (Metric), General Specification for (No S/S Document) |
| MIL-HDBK-1760 Revision A:2004 | Aircraft/Store Electrical Interconnection System |
| MS27472 Revision J:2012 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series II |
| SAE AS6129 | AS6129: Interface Standard, Airborne EO/IR Systems, Electrical |
| MIL-DTL-38999-30 Revision C:2014 | Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Sockets, Series III, Metric |
| MIL-DTL-38999-62 Base Document:2014 | Sealing Boot, Size 8, Pin or Socket, Shielded Crimp Contacts, Electrical Connector, Circular, Metric |
| MIL-DTL-38999-43 Revision B:2010 | Connectors, Electrical, Circular, Receptacle, Jam Nut Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric |
| MS27654 Revision D:2002 | Connectors, Receptacle, Electrical, Back Panel, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series I |
| PREN 3645-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, TRIPLE START THREADED COUPLING, OPERATING TEMPERATURE 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| MIL-DTL-38999-29 Revision C:2014 | Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Series III, Metric |
| SAE AS5725B | Interface Standard, Miniature Mission Store Interface |
| ARINC 791P2-1 : 2014 | MARK I AVIATION KU-BAND AND KA-BAND SATELLITE COMMUNICATION SYSTEM - PART 2: ELECTRICAL INTERFACES AND FUNCTIONAL EQUIPMENT DESCRIPTION |
| MS20029 Revision G:2010 | Connectors, Receptacle, Electrical, Jam Nut Mounting, Solder Type, Bayonet Coupling, Class P, Series I |
| MS27470 Revision H:2012 | Connectors, Receptacle, Electrical, Jam-Nut Mounting, Solder Type, Hermetic Seal, Series I |
| MIL-DTL-38999-20 Revision G:2008 | Connectors, Electrical, Circular, Receptacle, Threaded, Wall Mounting Flange, Removable Crimp Contacts, Series III, Metric |
| MS27466 Revision K:2012 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series I |
| MS27496 Revision H:2012 | Connectors, Receptacle, Electrical, Box Mounting, Crimp Type, Bayonet Coupling, Series I |
| MS27476 Revision G:2012 | Connector, Receptacle, Electrical, Box Mounting, Solder Type, Hermetic Seal, Series II |
| MS20028 Revision G:2010 | Connectors, Plug, Electrical, Straight, Solder Type, Bayonet Coupling, Class T, Series I |
| MIL-DTL-38999-44 Revision D:2009 | Connectors, Electrical, Circular, Receptacle, Jam-Nut Mounting, Breech Coupling, Removable Crimp Contacts, Series IV, Metric |
| BS ISO/IEC/IEEE 80005-1:2012 | Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements |
| MIL-DTL-38999-23 Revision C:2008 | Connectors, Electrical, Circular, Threaded, Receptacle, Jam-Nut Mounting, Hermetic, Hermetic Solder Contacts, Series III, Metric |
| MIL-DTL-38999-24 Revision J:2011 | Connectors, Electrical, Circular, Receptacle, Threaded, Jam-Nut Mounting, Removable Crimp Contacts, Series III, Metric |
| MIL-DTL-38999-48 Revision B:2014 | Connectors, Electrical, Circular, Receptacle, Weld Mounting, Hermetic, Breech Coupling, Hermetic Soler Contacts, Series IV, Metric |
| MIL-STD-1760 Revision E:2007 | Aircraft/Store Electrical Interconnection System |
| MS27336 Revision G:2010 | Connectors, Plug, Electrical, Straight, Solder Type, Bayonet Coupling, Classes, P and T, Series II |
| MS27475 Revision G:2012 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Solder Type, Hermetic Seal, Series II |
| MIL-DTL-27599 Revision E:2016 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for |
| MS27656 Revision E:2012 | Connectors, Receptacle, Electrical, Back Panel, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series I |
| MIL-DTL-38999-21 Revision C:2008 | Connectors, Electrical, Circular, Threaded, Receptacle, Box Mounting Flange, Hermetic, Hermetic Solder Contacts, Series III, Metric |
| MIL-DTL-38999-45 Revision B:2010 | Connectors, Electrical, Circular, Receptacle, Solder Mounting, Hermetic, Breech Coupling, Hermetic Solder Contacts, Series IV, Metric |
| MS27652 Revision B:2002 | Connectors, Receptacle, Electrical, Wall Mounting Flange, Crimp Type, Bayonet Coupling, Series I |
| MIL-DTL-38999-60 Base Document:2004 | Connectors, Electrical, Plug, Circular, Threaded, Straight, Removable Crimp Contacts, Fiber Optic Termini, Tight Tolerance, Series III, Shell Size 25, Metric |
| MIL-DTL-38999-40 Revision B:2009 | Connectors, Electrical, Circular, Receptacle, Wall Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series IV, Metric |
| MS27468 Revision K:2012 | Connectors, Receptacle, Electrical, Jam-Nut Mounting, Crimp Type, Bayonet Coupling, Series I |
| MIL-DTL-38999-27 Revision C:2008 | Connectors, Electrical, Circular, Threaded, Receptacle, Weld Mounting, Hermetic, Hermetic Solder Contacts, Series III, Metric |
| MS20026 Revision F:2010 | Connectors, Receptacle, Electrical, Wall Mount, Solder Type, Bayonet Coupling, Class T, Series 1 |
| MIL-DTL-38999-36 Base Document:2006 | Connectors, Electrical, Circular, Threaded, Plug, Lanyard Release, Fail-Safe, Removable Crimp Contacts, Pins, Shell Size 25, Series III, Metric |
| SAE AS47643 | Verification Methods for MIL-STD-1760E Aircraft Station Interfaces |
| MIL-DTL-83538-11 Revision C:2015 | Connectors and Accessories, Electrical, Circular, Umbilical, Adapter, Buffer Plug, Non-Removable Pin Contacts, for MIL-STD-1760 Applications (METRIC) |
| SAE AS4270A | Validation Methods for MIL-STD-1760 Mission Stores |
| SAE AS5590A | Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For |
| SAE ARP 1308 : 2014 | ELECTRICAL CONNECTORS FOR AEROSPACE, SHIPBOARD, GROUND VEHICLES AND ASSOCIATED EQUIPMENT |
| SAE AS47642B | Validation Methods for MIL-STD-1760C Aircraft Station Interfaces |
| BS EN 3645-001:2015 | Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175°C or 200°C continuous Technical specification |
| EN 3645-001:2015 | Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 001: Technical specification |
| MIL-C-29600 Base Document:1989 | Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts, Associated Hardware, General Specification for (S/S by SAE-AS29600) |
| MIL-DTL-38999-42 Revision B:2009 | Connectors, Electrical, Circular, Receptacle, Box Mounting Flange, Breech Coupling, Removable Crimp Contacts, Series IV, Metric |
| MIL-DTL-38999-47 Revision B:2009 | Connectors, Electrical, Circular, Plug, Breech Coupling, Removable Crimp Contacts, Series IV, Metric |
| MIL C 38999/31 : B | CONNECTORS, ELECTRICAL, CIRCULAR, PLUG, LANYARD RELEASE, FAIL-SAFE REMOVABLE CRIMP CONTACTS, PINS, SERIES 3, SHELL SIZE 25, METRIC |
| SAE AS47641A | Validation Methods for MIL-STD-1760B Aircraft Station Interfaces |
| MIL-DTL-38999-26 Revision G:2011 | Connectors, Electrical, Plug, Circular, Threaded, Straight, Removable Crimp Contacts, Series III, Metric |
| MIL C 38999/20 : D | CONNECTORS, ELECTRICAL, CIRCULAR, RECEPTACLE, WALL MOUNTING FLANGE REMOVABLE CRIMP CONTACTS, SERIES 3, METRIC |
| MS27661 Revision F:2011 | Connectors, Plug, Electrical, Crimp Type, Lanyard Release, Fail-Safe, Series I |
| MS 27653 : B | CONNECTORS, PLUG, ELECTRICAL, STRAIGHT, CRIMP TYPE, BAYONET COUPLING, SERIES 1 |
| MIL-DTL-83538-13 Revision A:2008 | Connectors and Accessories, Electrical, Circular, Umbilical, Test Plug, Removable Crimp Contacts, Pins, for MIL-STD-1760 Applications (Metric) |
| MIL-DTL-38999-46 Revision B:2008 | Connectors, Electrical, Circular, Plug, Breech Coupling, EMI Grounding, Removable Crimp Contacts, Series IV, Metric |
| MS27478 Revision G:2012 | Connectors, Receptacle, Electrical, Solder Mounting, Solder Type, Hermetic Seal, Series II |
| MS27337 Revision E:2010 | Connectors, Receptacle, Electrical, Jam Nut Mounting, Solder Type, Bayonet Coupling, Classes P and T, Series II |
| MS27477 Revision J:2012 | Connectors, Receptacle, Electrical, Jam Nut Mounting, Solder Type, Hermetic Seal, Series II |
| IEC/ISO/IEEE 80005-1:2012 | Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements |
| SAE AS29600A | Connectors, Electrical, Circular, Miniature, Composite, High Density, Quick Coupling, Environment Resistant, Removable Crimp Contacts Associated Hardware, General Specification For |
| SAE AS39029/114B | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SIZE 8, MIL-DTL-38999 SERIES I, III, AND IV |
| DSCC 02004 : B | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 3, AND 4 CONNECTORS) |
| SAE AS39029/122 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, EXPANDED PERFORMANCE, SIZES 10, 12, 16, 20, 22 AND 23 (FOR MIL-DTL-38999 SERIES III CONNECTORS) |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| SAE AS39029/90A | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8 |
| SAE AS39029/113B | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, PIN, SIZE 8, (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS) |
| SAE AS39029/60B : 2016 | CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-C-38999 SERIES 1, 3, AND 4 CONNECTORS) |
| SAE AS39029/91A | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 8 |
| SAE AS39029/59B | CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-38999 SERIES I, III, AND IV CONNECTORS) |
| MIL-DTL-27599 Revision E:2016 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect, Environment Resistant, Solder Contacts, General Specification for |
| DSCC 02003 : A | CONTACT, ELECTRICAL CONNECTOR, CONCENTRIC TWINAX, SOCKET, SHIELDED, SIZE 12 (FOR MIL-DTL-38999 SERIES 1, 3, AND 4 CONNECTORS) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.