MIL-STD-129 Revision R:2014
Current
Current
The latest, up-to-date edition.
Military Marking for Shipment and Storage
Available format(s)
PDF
Language(s)
English
Published date
18-02-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
APPENDIX A - TECHNICAL DETAILS FOR
2D (PDF417) BAR CODE
CONCLUDING MATERIAL
Defines the minimum requirements for uniform military marking for shipment and storage. Additional marking may be required by the contract or the cognizant activity.
| DevelopmentNote |
Supersedes MIL HDBK 129. (12/2002)
|
| DocumentType |
Standard
|
| Pages |
337
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This standard provides the minimum requirements for uniform military marking for shipment and storage. Additional marking may be required by the contract or the cognizant activity.
| MIL-C-24938 Revision A:1993 | COATS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
| ASTM A 135 : 2005 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM E 785 : 1981 : R2006 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM A 392 : 2011 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| MIL-R-85895 Base Document:1988 | RACK, BOMB EJECTOR, AIRCRAFT BRU-32/A |
| MIL-A-83783 Base Document:1972 | Adapter, Test, MX-9042/G |
| MIL B 15606 : H | BRICK, REFRACTORY, & BURNER TILE, NAVAL BOILER FURNACE LINING QUALITY |
| LLL-A-650 Revision D:1989 | ARCH AND CLIP BOARD FILES, COMPOSITION HARDBOARD BACK |
| MIL-G-37839 Base Document:1977 | GRISEOFULVIN TABLETS, MODIFIED |
| MIL M 51103 : B | MAGNESIUM OXIDE, TECHNICAL |
| MIL-A-43820 Revision B:1981 | AIR LOCK, (MUST) |
| ASTM B 91 : 2017 : REDLINE | Standard Specification for Magnesium-Alloy Forgings |
| ASTM C 725 : 1990 : R2014 | Standard Specification for Semidense Mineral Fiber Siding (Withdrawn 2019) |
| DOD-G-82673 Base Document:1977 | GRAPHITE, NATURAL, POWERED, TECHNICAL |
| MIL-C-6781 Revision B:1960 | CONTROL PANEL, AIRCRAFT EQUIPMENT, RACK OR CONSOLE MOUNTED |
| MIL-B-50451 Revision B:1976 | BLASTING MACHINE, M32 PARTS AND ASSEMBLY |
| ASTM A 897M : 1990 : R1997 | Standard Specification for Austempered Ductile Iron Castings [Metric] (Withdrawn 2001) |
| MIL-W-17316 Revision A:1980 | WIND MEASURING SET AN/PMQ-30 (COMPONENTS OF) |
| MIL F 0024385 : E | FIRE EXTINGUISHING AGENT, AQUEOUS FILM-FORMING FOAM (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| SAE AS 85188 : 2013 | RIVETER, POWER, PNEUMATIC-HYDRAULIC BLIND RIVET INSTALLATION |
| MIL-S-52256 Revision C:1990 | SURVEYING INSTRUMENT; AZIMUTH GYRO, LIGHTWEIGHT |
| ASTM B 403 : 2012 : REDLINE | Standard Specification for Magnesium-Alloy Investment Castings |
| MIL-C-47224 Revision B:1993 | COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE COMPONENT |
| DOD-A-82720 Base Document:1982 | ADHESIVE, MODIFIED-EPOXY, FLEXIBLE, TWO-PART (METRIC) |
| MIL-R-83330 Base Document:1971 | RESIN, HEAT RESISTANT, LAMINATING |
| MIL-L-47058 Revision A:1991 | LITHIUM CHLORIDE, PURIFIED GRADE |
| O-F-499 Revision D:1985 | FLUX, BRAZING, (SILVER BRAZING FILLER METAL, LOW MELTING POINT) |
| O-S-602 Revision E:1977 | SODIUM HYPOCHLORITE SOLUTION |
| MIL-C-82827 Base Document:1989 | COMPOUND, ANTIOXIDANT |
| PD IEC/TS 62668-1:2016 | Process management for avionics. Counterfeit prevention Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| MIL H 37730 : NOTICE 1 | HYDROGEN PEROXIDE SOLUTION, USP |
| MIL N 37847 : 0 | NEOMYCIN SULFATE, HYDROCORTISONE, AND POLYMYXIN B SULFATE SUSPENSION OTIC |
| MIL-B-63086 Base Document:1977 | Booster Assembly for Demolition Kit Cratering, M180 Parts for, Loading, Assembling and Packing |
| MIL-V-82808 Base Document:1989 | |
| DDD-P-46 Revision D:1975 | PACK, GAUZE, ABDOMINAL |
| MIL-W-36775 Revision A:1979 | WET BULB GLOBE TEMPERATURE KIT |
| AA-B-260 Revision F:1975 | BEDSPRING, BOX TYPE |
| MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
| MIL A 85670 : 0 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS -3793/A |
| MIL-R-71126 Base Document:1992 | RIFLE, 7.62 MILLIMETER, SNIPER W/DAY OPTICAL SIGHT AND CARRYING CASES - M24 |
| MIL-S-52541 Base Document:1966 | SURVEYING SET, TRIANGULATION RECONNAISSANCE, SPECIALISED PACKAGING OF |
| MIL-C-28779 Revision B:1972 | COMBINER, EXTENDED FREQUENCY RANGE CU-2OO7 (/SRR) |
| MIL-W-10430 Revision D:1994 | WELDING RODS AND ELECTRODES, PACKAGING OF |
| MIL-V-22272 Revision D:1982 | VISORS, NEODYMIUM LASER, PROTECTIVE FOR AIRCREWMAN'S HELMET |
| MIL-S-36662 Base Document:1970 | STOPPER, BOTTLE WHITE RUBBER |
| MIL-C-11336 Revision A:1967 | CHROMIC CHLORIDE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-H-37728 Base Document:1977 | HEMATOXYLIN, ANALYZED REAGENT |
| MIL C 81984 : B | CARTRIDGE, IMPULSE, MARK 107 MOD 1 |
| MIL-M-37833 Base Document:1977 | MUELLER HINTON MEDIUM DEHYDRATED |
| MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-H-7195 Revision G:1991 | HARDWARE, PARACHUTE, GENERAL SPECIFICATION FOR |
| MIL-S-6758 Revision B:1993 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| MIL-T-55309 Base Document:1971 | TEST SET, RADIO FREQUENCY POWER AN/USM-161 ( ) |
| MIL-I-27674 Revision C:1994 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE MULTIFUNCTION, MINUS 5O DEG TO PLUS 2OO DEG C |
| MIL-C-43454 Revision C:1989 | CLEANING COMPOUND, OPTICAL LENS (READY TO USE) |
| MIL-C-37648 Base Document:1978 | CARBIDOPA AND LEVODOPA TABLETS |
| ZZ E 00661 : F (1) NOTICE 2 | ERASERS, RUBBER AND RUBBER SUBSTITUTE |
| AA C 30 : D | CABINET, KEY, (BOXES AND RACKS METAL AND IDENTIFICATION SYSTEMS) |
| MIL A 23940 : 0 | |
| MIL P 23942 : 0 | POLYBUTADIENE, LINEAR, CARBOXYL TERMINATED |
| MIL-M-48146 Base Document:1973 | MOLYBDENUM TRIOXIDE (FOR USE IN AMMUNITION) |
| MIL E 5589 : D | EARPHONE, (EXTENDED RANGE), H-301/U |
| WW-C-624 Revision E:1983 | COUPLING ASSEMBLY, HOSE (GARDEN, WATER, AND WATER SUCTION) |
| ASTM E 1976 : 2011 : REDLINE | SPECIFICATION FOR SHELTER, TACTICAL, NONEXPANDABLE |
| MIL-A-52679 Revision B:1983 | ANCHOR, SURFACING MEMBRANE: 12 INCH |
| GGG-G-670 Base Document:1956 | GRASS HOOKS, WHIP GRASS CUTTERS, AND WHIP WEED CUTTERS |
| ASTM F 2590 : 2006 : EDT 1 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| MIL-A-10894 Revision C:1959 | AMPLIFIER POWER SUPPLY AM-598( )/U |
| MIL-STD-1667 Revision B:1995 | PROVISIONS FOR EVALUATING QUALITY OF HOODS, COLD WEATHER, EXTREME COLD WEATHER AND FLYERS |
| MIL-B-13842 Revision C:1968 | BAG, SOILED CLOTHES |
| MIL-K-52338 Revision B:1991 | KEEPER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL-S-37795 Base Document:1978 | SODIUM BICARBONATE INJECTION, USP |
| MIL P 17667 : D | PAPER, WRAPPING, CHEMICALLY NEUTRAL (NON CORROSIVE) |
| MIL A 18455 : C | ARGON, TECHNICAL |
| MIL-S-23665 Revision B:1968 | SONOBUOY, DETECTION DEVICES, PRESERVATION, PACKAGING AND PACKING, PROCEDURES FOR |
| MIL A 46077 : E | ARMOUR PLATE, TITANIUM ALLOY, WELDABLE |
| MIL G 2145 : A NOTICE 1 | GENERATOR SET, GASOLINE ENGINE DRIVEN, DIRECT AND ALTERNATING CURRENT [NAVAL SHIPBOARD USE] |
| MIL-A-53079 Base Document:1989 | ANCHOR, NAVMOOR CAUSEWAY MOORING |
| DOD-S-87956 Base Document:1979 | SHELTER, S-80A AND S-82A |
| GGG-C-1520 Base Document:1965 | CARRIER, TOOL |
| ASTM A 159 : 1983 : R2006 | Standard Specification for Automotive Gray Iron Castings |
| MIL-H-44099 Revision A:1986 | Helmet, Ground Troops and Parachutists (No S/S Document) |
| MIL T 0022238 : J | TANK, LIQUID STORAGE, METAL, FOR PETROLEUM PRODUCTS |
| MIL-DTL-4 Revision M:1997 | TIRES AND INNER TUBES (NON-AIRCRAFT); PACKAGING OF |
| MIL-C-85043 Revision B:1987 | CLOTHS, CLEANING, LOW LINT |
| MIL C 14522 : D | COMPONENTS, PREFABRICATED STRONG ROOM, PORTABLE: FOR SMALL ARMS AND EQUIPMENT |
| MIL-R-83372 Base Document:1972 | RELAY, ELECTROMAGNETIC, HYBRID, EMI SUPPRESSED, GENERAL SPECIFICATION FOR |
| ASTM C 221 : 1998 : R2003 : EDT 1 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| MIL M 2130 : A | MOTOR GENERATORS, GENERAL PURPOSE (NAVAL SHIPBOARD USE) |
| MIL-C-83473 Revision A:1982 | CAP, EXTREME COLD WEATHER, HGU-38/P |
| ASTM B 247M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric) |
| ASTM B 127 : 2005 : R2009 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM A 536 : 1984 : R2004 : EDT 1 | Standard Specification for Ductile Iron Castings |
| MIL-E-29236 Base Document:1985 | EXPLOSIVES, BLASTING AGENT, SLURRY, WITH BOOSTERS MILITARY CONSTRUCTION |
| MIL-R-38370 Revision B:1972 | RECORDING SET, FLIGHT DATA A/A24U-10 |
| MIL-S-55689 Base Document:1969 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778()/GRC |
| MIL-A-38307 Revision A:1981 | ACCELEROMETER, AIRCRAFT, MX-6663/AJB-7 |
| MIL-T-38034 Revision E:1970 | TIMER, FIRE CONTROL, BOMBING, DUAL |
| RR-B-00300 Base Document:1966 | BINDER, NOTE PAD, SPRING-BACK |
| MIL-W-46291 Revision C:1996 | WARHEAD, GUIDED MISSILE, HE, M17A1 LOADING, ASSEMBLING AND PACKING |
| MIL-P-52281 Revision B:1978 | PROCESSING MACHINE, PHOTOGRAMMETRIC DIAPOSITIVE PLATES |
| MIL-B-44421 Base Document:1991 | Body Armor, Small Arms Protective, Aircrew, Survival (No S/S Document) |
| MIL-W-21157 Revision A:1971 | WELDMENT, STEEL, CARBON AND LOW ALLOY (YIELD STRENGTH 3O,OOO - 6O,OOO PS1) |
| O-L-298 Revision B:1969 | LITHOGRAPHIC BLANKET ROLLER WASH |
| MIL-M-16149 Revision G:1990 | MITTEN, WELDERS |
| PPP E 1533 : B NOTICE 1 | ENVELOPES, PACKAGING, CUSHIONED |
| MIL-A-9962 Revision A:1966 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| MIL-D-10662 Revision D:1983 | 1,2 DICHLOROETHANE, TECHNICAL |
| MIL-C-1173 Revision E:1976 | CART, GENERAL HAULING |
| MIL A 24779 : 0 | ANODES, SACRIFICIAL ALUMINUM ALLOY |
| MIL-F-45216 Revision A:1984 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| MIL-B-12745 Revision A:1973 | BRIDGE ERECTION SET, FIXED BRIDGE, BASIC SET, FOR BRIDGES, STEEL, RAILWAY |
| DOD-P-51455 Base Document:1979 | POTASSIUM CARBONATE, ANHYDROUS, TECHNICAL (METRIC) |
| MIL-A-52568 Revision C:1982 | AIR CONDITIONER, TRAILER MOUNTED, ELECTRIC-MOTOR DRIVEN, 18,000 BTU/HR |
| P-C-111 Revision D:1977 | CARBON REMOVING COMPOUND |
| MIL-P-43038 Revision B:1973 | PLASTIC MOLDING MATERIAL, POLYESTER, LOW PRESSURE LAMINATING, HIGH TEMPERATURE RESISTANT |
| DOD-N-51512 Base Document:1985 | NICKEL SALTS, ELECTROPLATING (METRIC) |
| PPP-C-795 Revision D:1994 | Cushioning Material, Closed Cell Flexible, Plastic Film |
| MIL-P-82809 Base Document:1989 | POLYMER, LIQUID, HYDROXYL TERMINATED POLYBUTADIENE, WITH ANTIOXIDANT |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-I-82819 Base Document:1986 | INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED |
| MIL-D-70327 Base Document:1959 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL-P-24608 Revision A:1987 | PIPE, FITTINGS, AND ADHESIVE KITS, GLASS-REINFORCED THERMOSETTING EPOXY RESIN FOR SHIPBOARD PIPING SYSTEMS |
| MIL-B-14154 Revision E:1992 | BORING MACHINE, CAM AND MAIN BEARINGS, PORTABLE |
| SAE AS 8662 : 1999 | KNIFE, HUNTING, SHEATHED, SURVIVAL, PILOTS |
| MIL-D-51161 Revision A:1978 | N, N'- DIISOPROPYLCARBODIIMIDE |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED PLYWOOD |
| MIL-A-46146 Revision B:1990 | ADHESIVE-SEALANTS, SILICONE, RTV, NONCORROSIVE (FOR USE WITH SENSITIVE METALS AND EQUIPMENT) |
| MIL-C-87979 Base Document:1987 | CLOCK, AIRCRAFT, ELECTRONIC |
| MIL-C-87248 Base Document:1987 | CAP, CAMOUFLAGE PATTERN (BASEBALL STYLE) |
| ASTM B 317/B317M : 2007 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| MIL-P-11520 Revision F:1989 | PRESERVATIVE COATING, RUBBER, FOR RUBBER SURFACES |
| AA-C-2786 Base Document:2004 | CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5 |
| MIL-A-53100 Base Document:1990 | ARCTIC FUEL SYSTEM SUPPLY POINT (AFSSP) |
| MIL-C-2399 Revision B:1966 | CEMENT, LIQUID, TENT PATCHING |
| MIL-G-37665 Base Document:1977 | GENTAMICIN SULFATE CREAM, USP |
| MIL T 36852 : B | TEST KIT, MONONUCLEOSIS DETERMINATION |
| MIL-P-60169 Revision B:1970 | PAPER, SEALING |
| MIL-D-63370 Base Document:1981 | DISPENSER, MINE GROUND VEHICLE, M128 PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-C-0051096 Revision E:1983 | CORE MATERIAL, C18 |
| MIL P 21454 : 0 | POWER SUPPLIES, METALLIC RECTIFIER, CATHODIC PROTECTION, RESERVE FLEET |
| JJ-N-171 Revision C:1977 | NET, INSECT |
| MIL-B-44129 Base Document:1984 | BROCCOLI, DEHYDRATED, COMPRESSED |
| MIL C 39010 : D | COIL, FIXED, RADIOFREQUENCY, MOLDED, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| DDD-C-001799 Base Document:1972 | CARPET, SQUARES, PILE SURFACE, TILE TYPE, WITH OR WITHOUT ATTACHED CUSHION |
| DOD-D-64015 Revision A:1986 | Diethylene Glycol Dinitrate (DEGDN) (for use in Ammunition) |
| MIL-F-50046 Base Document:1959 | FILTER, PARTICULATE, 5,000 CFM, C20 |
| MIL-C-36229 Base Document:1964 | CYLINDER, GRADUATED LABORATORY, POLYPROPYLENE |
| ASTM C 659 : 1990 : R1998 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| MIL C 47176 : NOTICE 1 | COATING, SURFACE MOISTURE CURING POLYURETHANE |
| MIL-J-87250 Base Document:1988 | JACKET, MAN'S: LIGHTWEIGHT WITH REMOVABLE LINER |
| MIL-O-43537 Revision C:1988 | OVERCOAT, MAN S, ARMY GREEN 44, WITH REMOVABLE LINER |
| MIL G 12223 : J | GLOVES, TOXICOLOGICAL AGENTS PROTECTIVE |
| GG-L-261 Revision D:1984 | LEVEL, SURVEYING: LOCATORS, HAND-TYPE |
| GGG-M-125-7 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PESTICIDES AND ORGANIC VAPORS) |
| MIL-DTL-14362 Revision H:2010 | LUMBER: UNITIZING AND LOADING OF |
| MIL-E-16400 Revision H:1987 | ELECTRONIC, INTERIOR COMMUNICATIONS AND NAVIGATION EQUIPMENT, NAVAL SHIP AND SHORE, GENERAL SPECIFICATION FOR |
| GG-G-91 Revision D:1972 | GAGE, TIRE PRESSURE, SELF CONTAINED AND INFLATOR GAGE, PNEUMATIC TIRE |
| MIL-B-63094 Revision B:1978 | BLASTING MACHINE, 50 CAP, M34 |
| MIL-T-12173 Revision D:1992 | TRAVELLER, BICYCLE |
| MIL-F-0010117 Revision B:1969 | FACEPIECE, COMBAT M9 |
| MIL-I-22598 Revision B:1989 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET SIZE BS-5 |
| SAE AMS T 81556 : 2001 | TITANIUM AND TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| MIL I 9900 : A | INTERPRETATION KIT. PHOTOGRAPHIC BS-2()n |
| MIL-S-3649 Revision G:1989 | SHIRTS, MENS LONG SLEEVE |
| MIL-S-52300 Revision D:1991 | SHOE ASSEMBLY, TRESTLE |
| L-B-001190 Base Document:1959 | BOTTLE, SCREW CAP (MEDICAMENT CONTAINER/DISPENSER FOR FIELD KIT/ASSEMBLIES) |
| MIL-T-81998 Base Document:1975 | TEST SET, RADIO SET AN/ARM-165 |
| MIL-B-20179 Revision E:1992 | BAG, BAILEY BRIDGE PARTS AND TOOLS: CLOTH, COTTON DUCK |
| MIL-C-70723 Base Document:1993 | CARTRIDGE, CALIBER .50, M-858 BALL AND M-860 TRACER SHORT RANGE TRAINING AMMUNITION |
| MIL-J-26149 Revision E:1988 | Jack, Hydraulic, Aircraft Maintenance, General Specification for |
| MIL-C-17614 Revision F:1987 | CAP, GARRISON, MAN'S |
| MIL-C-29632 Base Document:1990 | COAT, MAN'S, POLYESTER/WOOL, SERGE, FUSIBLE (COAST GUARD) |
| MIL-P-24377 Revision A:1982 | PACKING MATERIAL, ASBESTOS, BRAIDED, IMPREGNATED WITH PTFE (POLYTETRAFLUOROETHYLENE), SURFACE LUBRICATED |
| MIL-T-23759 Revision D:1989 | TANK, ASPHALT STORAGE, WHEEL MOUNTED |
| MIL-A-55674 Revision A:1969 | ANTENNA GROUP AN/TRA-37() |
| O-D-825 Revision C:1973 | DUPLICATING FLUID, DIRECT PROCESS (SPIRIT TYPE) |
| MIL C 18487 : A | COMPOUND, GUN SLUSHING |
| MIL C 53039 : A | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-C-55158 Revision B:1973 | CHARGER, BATTERY, PP-1659 ( ) /G |
| MIL-L-52733 Revision A:1986 | LABORATORY, AIRMOBILE, AVIATION FUEL |
| ASTM A 823 : 1999 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| A-A-59885 Base Document:2012 | CORROSION PREVENTION COMPOUND |
| MIL-T-29452 Revision A:1994 | TROUSERS, MEN'S: POLYESTER/WOOL |
| MIL-C-10479 Revision B:1969 | CRYSTAL IMPEDANCE METER TS 683/TSM |
| MIL-R-82817 Base Document:1989 | REINFORCEMENT, CARBON |
| MIL T 5578 : C | TANK, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-R-10879 Revision D:1958 | RADIOSONDE BASELINE CHECK SET AN/GMM-1 (COMPONENTS OF) |
| MIL-C-43419 Revision E:1989 | CAP, GARRISON, POLYESTER/WOOL, TROPICAL, ARMY GREEN 344 |
| MIL-T-87047 Revision A:1987 | TROUSERS, MEN'S POLYESTER/WOOL GABARDINE (CG) |
| MIL-M-37783 Base Document:1977 | METHENAMINE MANDELATE TABLETS, USP |
| MIL-C-37376 Base Document:1976 | CEPHALEXIN CAPSULES, USP |
| MIL-G-52859 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 400 HERTZ, PU-760/M |
| DDD-B-1022 Revision A:1975 | BLANKET, BED (THERMAL TYPE), COTTON |
| MIL-DTL-81581 Revision B:2006 | HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR |
| MIL-C-37611 Base Document:1977 | CHLORPROMAZINE HYDROCHLORIDE INJECTION, USP |
| MIL-S-44039 Revision C:1990 | SHIRT, MAN'S, LONG SLEEVE, POLYESTER/COTTON, ARMY GREEN 415, DURABLE PRESS |
| MIL L 0043335 : F | LINER, WET WEATHER PONCHO |
| MIL-C-43339 Revision D:1988 | COVERALLS, INDUSTRIAL: LINT-FREE |
| MIL-D-82134 Revision B:1973 | DUMMY LOAD, ELECTRICAL, 60/100 KW, 55/90 KVAR 3 PHASE, 60/400 HERTZ, AC |
| MIL-P-44115 Revision B:1992 | PLATFORM, ASSEMBLY, CARGO, AERIAL DELIVERY, TYPE V |
| MIL T 44094 : B | TROUSERS, NIGHT CAMOUFLAGE, DESERT |
| MIL T 14387 : A | TEST SET, RADAR AN/UPM-60() |
| MIL-B-43861 Revision A:1986 | BAG, PLASTIC, MORTUARY |
| MIL-DTL-2845 Revision E:1999 | PROPULSION SYSTEMS, BOAT AND SHIP; MAIN SHAFTING, PROPELLERS, BEARINGS, GAUGES, SPECIAL TOOLS, AND ASSOCIATED REPAIR PARTS; PRESERVATION, PACKAGING, PACKING AND STORAGE OF |
| MIL-P-10809 Revision G:1989 | PARKA, SNOW CAMOUFLAGE |
| MIL-P-37739 Base Document:1978 | PROMETHAZINE HYDROCHLORIDE INJECTION, USP |
| MIL-S-44041 Revision C:1990 | SHIRT, MAN'S, SHORT SLEEVE, POLYESTER/COTTON, ARMY GREEN 415, DURABLE PRESS |
| MIL-C-37802 Revision A:1977 | CEPHAPIRIN SODIUM, STERILE |
| MIL-P-23929 Revision A:1964 | PROPELLANT, H8 |
| A-A-2765 Base Document:1991 | PENCIL, MECHANICAL FOR 1.1 MM LEAD SIZE |
| MIL-A-46106 Revision B:1989 | ADHESIVE-SEALANTS, SILICONE, RTV, ONE-COMPONENT |
| MMM-A-132 Revision B:1994 | ADHESIVES, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL |
| MIL-M-37573 Revision A:1977 | METHOTREXATE SODIUM INJECTION USP |
| MIL-H-775 Revision E:1987 | HOSE, RUBBER OR FABRIC (INCLUDING TUBING); AND FITTINGS, NOZZLES AND STRAINERS, PACKAGING OF |
| MIL S 24317 : 0 | SWITCH, MULTI-STATION, PUSHBUTTON (ILLUMINATED AND NON-ILLUMINATED), GENERAL SPECIFICATION FOR |
| O-N-350 Revision C:1991 | NITRIC ACID, TECHNICAL |
| MIL-P-37762 Base Document:1978 | PHENYTOIN SODIUM INJECTION |
| MIL-S-16917 Revision B:1984 | SODIUM BISULFATE (NITER CAKE) |
| MIL-H-43905 Revision C:1990 | HASP, HIGH SECURITY PADLOCKS |
| ASTM C 663 : 1998 : R2008 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| MIL R 20092 : L | RUBBER OR PLASTIC SHEETS AND ASSEMBLED AND MOLDED SHAPES, SYNTHETIC, FOAM OR SPONGE, OPEN CELL |
| MIL-A-516 Revision J:1981 | AUGER, EARTH, SKIDMOUNTED; AND AUGER, EARTH, TURNTABLE BASE MOUNTED, POWER DRIVEN |
| MIL-C-24495 Base Document:1973 | CHAIR, STACKING, STEEL, NAVAL SHIPBOARD USE |
| MIL-P-60432 Revision C:1980 | PROPELLANT POWDER FOR USE IN BASE GRAIN, AHH |
| L-P-535 Revision E:1979 | PLASTIC SHEET (SHEETING): PLASTIC STRIP: POLY(VINYL CHLORIDE) AND POLY(VINYL CHLORIDE-VINYL ACETATE), RIGID |
| MMM-A-1617 Revision B:1995 | ADHESIVE RUBBER BASE GENERAL PURPOSE |
| MIL G 18474 : 0 | GENERATORS AND MOTORS, ALTERNATING CURRENT, NAVAL SHIP PROPULSION |
| MIL C 82813 : NOTICE 1 | CURING AGENT, ISOPHORONE DIISOCYANATE |
| MIL-O-82820 Base Document:1989 | OCTADECYL ISOCYANATE |
| MIL I 52295 : B | INTERPRETATION KIT, PHOTOGRAPHIC, ARMY TYPE |
| MIL-F-14580 Revision C:1975 | FERRIC CHLORIDE, ANHYDROUS, CRYSTALLINE, TECHNICAL |
| MIL-H-52297 Revision D:1988 | HOLDFAST ASSEMBLY: BAR TYPE |
| MIL-L-11647 Revision E:1991 | LEVER, BALK DEPRESSING, CLAW BAR TYPE |
| SAE AS 5356 : 2017 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
| MIL-L-37585 Base Document:1977 | LEVARTERENOL BITARTRATE INJECTION, USP |
| ASTM D 2683 : 2014 : REDLINE | Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing |
| MIL-A-24741 Base Document:1990 | ASSEMBLIES, METAL ELECTRICAL BACKPLANE, ONE AND TWO LAYER, GENERAL SPECIFICATION FOR |
| MIL-S-55389 Base Document:1973 | SUPPRESSOR, ELECTRICAL TRANSIENT, MX-7778A/GRC |
| MIL-P-83770 Revision B:1983 | POTASSIUM DICHROMATE - SULFURIC ACID TEST SOLUTION (METRIC) |
| MIL-DTL-27422 Revision F:2014 | TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
| SAE AS 85560 : 2013 | BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
| MIL-R-10761 Revision A:1962 | ROTARY CONVERTER (MOTOR GENERATOR) PU 134 ()/U, PU 140 ()/U, PU 141()/U & PU 143 ()/U |
| MIL-T-14132 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTION, SECOND ORDER |
| MIL-T-13420 Revision A:1959 | TELEPHONE SET TA 264() PT |
| MIL-A-26846 Revision B:1984 | AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN |
| TT-P-595 Revision A:1972 | PRESERVATIVE COATING, CANVAS |
| MIL T 14398 : J | TANK, FABRIC, COLLAPSIBLE, WATER, NYLON, RUBBER-COATED |
| GGG-V-790 Revision E:1992 | VULCANIZERS, HOT PATCH AND PLATE; INNER TUBE |
| MIL-T-21677 Base Document:1958 | TEST SET MARK 3 MOD 2 |
| MIL-G-17713 Revision D:1988 | GAGES, LIQUID LEVEL MEASURING, TANK |
| MIL-S-55234 Base Document:1963 | STANDING WAVE RATIO-POWER METER, ME-165 ( )/G |
| NNN C 940 : C | CYLINDER GRADUATED LABORATORY GLASS |
| DOD-B-82737 Base Document:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS, (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) - GENERAL SPECIFICATION FOR |
| MIL-O-37997 Base Document:1985 | OXYGEN GAS, USP HIGH PRESSURE, CYLINDER |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| ASTM C 875 : 1998 : R2014 | Standard Specification for Asbestos-Cement Conduit (Withdrawn 2019) |
| MIL-I-7062 Revision C:1975 | INDICATOR, POSITION, CONTROL SURFACES, 28 VOLT DC, GENERAL SPECIFICATION FOR |
| MIL F 83671 : A | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
| MIL B 0043154 : L | BOOTS, HOT WEATHER |
| MIL C 43549 : C | CAP, COLD WEATHER, INSULATING, HELMET LINER |
| MIL-A-82832 Base Document:1986 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING |
| MIL W 46374 : F | WATCH, WRIST - GENERAL PURPOSE |
| MIL-I-27191 Revision C:1995 | INDICATOR, POSITION, VARIABLE NOZZLE |
| MIL-A-85705 Revision A:1987 | ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR |
| MIL O 37396 : 0 | OXYTOCIN INJECTION USP, SYNTHETIC |
| MIL E 37764 : 0 | ERYTHROMYCIN LACTOBIONATE FOR INJECTION, USP |
| MIL-P-25518 Revision B:1981 | Plastic Materials, Silicone Resin, Glass Fiber Base, Low Pressure Laminated |
| MIL-P-37557 Base Document:1977 | PENICILLIN PROCAINE SUSPENSION, STERILE USP |
| MIL-I-81550 Revision C:1983 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, REVERSION RESISTANT SILICONE |
| MIL-I-82812 Base Document:1989 | IGNITION STRANDS |
| A-A-2753 Base Document:1991 | INK, BLACK, FOR DUPLICATING PROCESS |
| MIL-E-16298 Revision D:1989 | ELECTRIC MACHINES HAVING ROTATING PARTS AND ASSOCIATED REPAIR PARTS, PACKAGING OF |
| ASTM A 512 : 2017-11 | SPECIFICATION FOR COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING |
| DOD-B-24559 Base Document:1977 | BATTERY CELLS, MAIN STORAGE, LEAD ACID, DEEP SUBMERGENCE VEHICLES (METRIC) |
| ASTM B 211 : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| SAE AS 7997:1999 | MOTORS, AIRCRAFT HYDRAULIC, CONSTANT DISPLACEMENT - GENERAL SPECIFICATION FOR |
| MIL-DTL-12000 Revision K:2012 | CABLE, CORD, AND WIRE, ELECTRIC, PACKAGING OF |
| TT-M-261 Revision D:1970 | METHYL ETHYL KETONE, TECHNICAL |
| MIL T 83483 : B | THREAD COMPOUND, ANTISEIZE, MOLYBDENUM DISULFIDE-PETROLATUM |
| MIL-DTL-85670 Revision D:2012 | ANTENNA, BROADBAND AS-3191/A, AS-3792/A, AND AS-3793/A |
| MIL-F-37482 Base Document:1977 | FUROSEMIDE TABLETS, USP |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-L-53106 Base Document:1990 | LAUNCHER, BRIDGE, LIGHT ASSAULT TOWED |
| MIL-I-43295 Revision A:1968 | INK, MARKING, VINYL |
| MIL-P-55025 Base Document:1958 | POLYSTYRENE, UNMODIFIED (FOR USE AS A BINDER IN EXPLOSIVES) |
| MIL-I-82847 Base Document:1990 | IGNITION COMPOUND, MAGNESIUM-POLYTETRAFLUOROETHYLENE |
| SAE AS 8952 : 2005 | BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| MIL P 15064 : G | PAD, SHOULDER AND SLEEVE-HEAD |
| GGG-S-282 Revision E:1983 | SHEARS, METAL CUTTING, ELECTRIC (PORTABLE) |
| MIL-T-17585 Revision C:1983 | THERMOMETER, RECORDING, CAPILLARY TUBE AND BULB, AND RESISTANCE |
| MIL-DTL-18492 Revision B:2011 | TANKS, CARTRIDGE, POWDER, ROCKET, AND COMPONENTS (ALUMINUM) |
| MIL-R-22368 Revision D:1980 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS AND BOATS |
| AA-C-571 Revision H:1993 | COT, FOLDING |
| O-R-1151 Revision B:1969 | REGENERATOR, LITHOGRAPHIC BLANKET |
| BB-N-411 Revision C:1973 | NITROGEN, TECHNICAL |
| MIL-P-55213 Base Document:1963 | POWER SUPPLY PP-1588 ( ) MPQ-4A |
| MIL-T-21684 Base Document:1958 | TEST SET MARK 96 MOD 1 |
| MIL-C-0014003 Revision B:1955 | CAP, BLASTING, SPECIAL |
| ASTM F 1245 : 1989 : R1994 : EDT 1 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-B-734 Revision E:1984 | BREAKER, PAVING, GASOLINE POWERED, SELF CONTAINED |
| MIL-T-29369 Revision A:1987 | TROUSER, MENS WOOL AND POLYESTER/WOOL |
| MIL-L-52056 Revision D:1984 | LIGHT, SIGNAL, SURVEYING: SELF ILLUMINATED WITH CARRYING CAEM FOR USE WITH RANGE POLE |
| MIL-S-70692 Base Document:1988 | SYM-DI-BETA-NAPHTHYLPARAPHENYLENEDIAMINE |
| MIL-D-3994 Revision C:1982 | DEXTRIN, TECHNICAL |
| MIL-S-44197 Revision A:1991 | SHELTER, TACTICAL, EXPANDABLE, ONE-SIDE |
| MIL T 6396 : E | TANKS, AIRCRAFT PROPULSION FLUID SYSTEM, INTERNAL REMOVABLE, NON-SELF-SEALING |
| MIL V 52837 : A NOTICE 1 | VIEWER, X-RAY FILM INDUSTRIAL, WALL MOUNTED |
| MIL-G-37473 Base Document:1976 | GENTAMICIN SULFATE INJECTION, USP |
| MIL-A-11755 Revision E:1994 | ANTIFREEZE, ARCTIC-TYPE |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| MIL-S-196 Revision D:1988 | SUPPORT ITEMS, ACCESSORIES, AND KITS, MECHANICAL; PACKAGING OF |
| ASTM A 809 : 2008 : R2017 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| MIL-H-87041 Revision B:1983 | HAT, SERVICE (WHITE) |
| MIL-G-83872 Revision A:1977 | GYROSCOPE, DISPLACEMENT, TYPE SBU-23/A |
| MIL-N-36688 Revision B:1976 | NORETHINDRONE ACETATE AND ETHINYL ESTRADIOL TABLETS USP |
| MIL L 12039 : D | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| MIL-S-48567 Base Document:1977 | SLEEVE AND GRAIN ASSEMBLY |
| MIL-C-21709 Revision E:1984 | CAP, COLD WEATHER, PERMEABLE |
| DDD-P-0053 Revision C:1963 | PAD, ABDOMINAL (DRAINAGE DRESSING, COMBINATION) |
| MIL P 6279 : L | PARKA, EXTREME COLD WEATHER, TYPE N 3B |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-R-46837 Revision B:1990 | RACEWAY, STEEL, RIGID |
| MIL-B-13656 Revision B:1964 | BINOCULAR, M15A1 AND M17A1 |
| FF-B-575 Revision C:1970 | BOLTS, HEXAGON AND SQUARE |
| MIL-C-38392 Revision A:1969 | COMPRESSOR, HERMETIC, AIR CONDITIONING, GENERAL SPECIFICATION FOR |
| MIL-B-41816 Revision H:1990 | BOOTS, COLD WEATHER, INSULATED, RUBBER (WET-COLD; DRY-EXTREME COLD) |
| MIL A 23798 : C | AIR CONDITIONER, FAN-COIL ASSEMBLY |
| MIL W 5521 : B | WASHER, AIRCRAFT HYDRAULIC PACKING BACK UP |
| MIL-C-24314 Revision C:1985 | CANISTER, ND-C-2 (FOR ND MARK V PROTECTIVE MASK) |
| MIL-C-25107 Revision B:1972 | CARBON REMOVING COMPOUND, ORTHODICHLOROBENZENE, FOR ENGINE PARTS |
| MIL T 27252 : A | TEST SET, SYNCHRO, TTU-73/E DC SELSYN, AIRCRAFT INSTRUMENTS |
| MIL-M-8555 Revision C:1984 | MISSILE, GUIDED, DESIGN AND CONSTRUCTION, GENERAL SPECIFICATION |
| DOD-D-51524 Base Document:1986 | DYE, DISPERSE BLUE 3 (METRIC) |
| O-B-420 Revision C:1976 | BLEACH, LAUNDRY, ORGANIC CHLORINE |
| MIL P 85891 : A | PLASTIC MEDIA, FOR REMOVAL OF ORGANIC COATINGS |
| GGG-P-323 Revision C:1962 | PICK, ICE |
| MIL-S-37835 Base Document:1977 | STREPTOMYCIN SULFATE USP |
| MIL-A-27420 Base Document:1970 | AIR, LIQUID, FOR BREATHING PURPOSES |
| MIL-M-23573 Revision B:1986 | MONOETHANOLAMINE CHELATING AGENT SOLUTION |
| MIL-B-18013 Revision B:1994 | BATTERY, STORAGE, SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| O-C-1824 Base Document:1973 | CLEANING COMPOUND, SOLVENT, HEAVY DUTY, LIQUID |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| MIL-R-85545 Revision B:1990 | Rocket, GTR-18A |
| MIL-P-14737 Base Document:1968 | PROPELLANT, M7 |
| MIL-C-51047 Revision B:1987 | COMPOUND, ANTISEEPAGE, FOR COOLING SYSTEM, INTERNAL COMBUSTION ENGINE (METRIC) |
| MIL-I-17244 Revision E:1971 | INDICATOR, TEMPERATURE, DIRECT-READING, BIMETALLIC, (3 AND 5 INCH DIAL) |
| MIL F 52618/9 : A | FITTINGS, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND: GENERAL SPECIFICATION FOR |
| MIL-A-82845 Base Document:1987 | ADHESIVE, PASTE, ONE-PART, NON-ASBESTOS |
| MIL-R-6130 Revision C:1980 | RUBBER, CELLULAR, CHEMICALLY BROWN |
| MIL A 3316 : C | ADHESIVE, FIRE RESISTANT, THERMAL INSULATION |
| MIL-N-37439 Revision A:1977 | NAFCILLIN SODIUM FOR INJECTION USP |
| MIL-S-52836 Revision A:1974 | SUPPLEMENTARY SET, BRIDGE, TROOP SUPPORT, PACKAGING OF |
| MIL H 27893 : E | HARNESS, PARACHUTIST S, INDIVIDUAL EQUIPMENT PACK (H TYPE) |
| MIL-P-49139 Base Document:1978 | POWER SUPPLY PP6L48 ((/U |
| ASTM A 220/A220M : 1999 | Standard Specification for Pearlitic Malleable Iron |
| MIL-C-52009 Revision D:2012 | CONTROL-PANEL ASSEMBLY FOR PORTABLE HELIPORT ELECTRIC LIGHTING |
| MIL-T-53048 Revision C:1991 | TANK, FABRIC, COLLAPSIBLE; AIR COLUMN SUPPORTED, OPEN TOP, WATER STORAGE 3000 GALLONS |
| PPP-C-1120 Revision D:2012 | CUSHIONING MATERIAL, UNCOMPRESSED BOUND FIBER FOR PACKAGING |
| MIL W 3688 : C | WAX EMULSION (RUST INHIBITING) |
| MIL T 29360 : 0 | TEST EQUIPMENT, DATA COMMUNICATIONS TERMINAL AN/TYC-5A(V) |
| MIL-P-44336 Base Document:1988 | PACKAGING OF SPECIAL OPERATIONS FORCES MOUNTAINEERING EQUIPMENT (SOFME) SET |
| MIL-C-43063 Revision F:1991 | COVERALLS, ROCKET FUEL HANDLER'S, IMPERMEABLE, FULL PROTECTION |
| ASTM C 1448/C1448M : 2005 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| MIL-H-1431 Revision B:1972 | HAMMER, HAND (PITON, MOUNTAIN) |
| MIL A 87136 : NOTICE 1 | ANTENNAS, AIRBORNE GENERAL SPECIFICATION FOR |
| MIL-T-83460 Base Document:1975 | TRANSDUCER, MOTIONAL PICKUP TRU-164/A |
| MIL M 46039 : A | MAGNESIUM ALLOY BAR, ROD AND SPECIAL SHAPED SECTIONS, EXTRUDED (ZK21A) |
| MIL-T-47063 Revision A:1991 | TRIETHYL CITRATE |
| MIL-T-36385 Revision C:1977 | TESTER, FLASH POINT, CLOSED TYPE 115 VOLT, 60 HZ AC |
| MIL-B-6039 Revision E:1994 | BEARING, DOUBLE ROW, BALL, SEALED ROD END, ANTI FRICTION, SELF ALIGNING |
| MIL H 26385 : E | HOSE, OXYGEN AND PRESSURIZATION, OZONE RESISTANT |
| DSCC 86129 : B | GASKETS, SHIELDING, EMI/RFI, WIRE MESH, RESILIENT, STRIPS WITH ROUND CROSS SECTION |
| MIL-R-81202 Revision D:1981 | Receiver Assembly, Nitrogen, for LAU-7 Series Launchers |
| MIL-I-83152 Revision B:1974 | INDICATOR, INDICATED-AIRSPEED AVU-22/A (INDICATOR-TRANSDUCER) |
| MIL I 7627 : F | INDICATOR, TURN AND SLIP 28V DC |
| MIL D 9129 : D | DISCHARGERS, ELECTROSTATIC - GENERAL SPECIFICATION FOR |
| MIL O 24311 : 0 | OSCILLOSCOPE, PORTABLE AND PORTABLE/RACK MOUNTABLE, 5O MEGACYCLE |
| MIL-A-87022 Revision B:1987 | APRON, UTILITY, DISPOSABLE |
| MIL-H-24936 Base Document:1987 | HOOD, ANTI FLASH, FLAME RESISTANT |
| MIL-P-53124 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED |
| MIL-P-55200 Revision D:1973 | POWER SUPPLY PP-2953 ( ) /U |
| PPP-P-225 Revision C:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, GENERAL OFFICE, STEEL |
| MIL-C-15074 Revision E:1991 | CORROSION PREVENTIVE, FINGERPRINT REMOVER |
| MIL-DTL-49514 Revision A:2016 | COPPER CRUSHER SPHERES FOR CANNON AND MORTAR PRESSURE GAUGES, GENERAL SPECIFICATION FOR |
| MIL-V-28712 Base Document:1969 | VOLTMETER, MILITARIZED, SOLID STATE, DC DIFFERENTIAL, GENERAL SPECIFICATION FOR |
| MIL-T-21014 Revision D:1986 | TUNGSTEN BASE METAL, HIGH DENSITY |
| MIL-I-7721 Revision D:1992 | INDICATOR, VERTICAL SPEED, 3-INCH |
| PPP-P-001938 Base Document:1976 | PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED |
| MIL-L-35078 Revision M:1990 | LOAD UNIT PREPARATION OF SEMIPERISHABLE SUBSISTENCE ITEMS; CLOTHING, PERSONAL EQUIPMENT AND EQUIPAGE; GENERAL SPECIFICATION FOR |
| MIL-G-52557 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5 KW 60 HERTZ PU-620M |
| MIL-M-37636 Base Document:1977 | MICONAZOLE NITRATE CREAM, TOPICAL |
| MIL-D-37219 Base Document:1975 | DISULFIRAM TABLETS NF |
| MIL-A-37476 Base Document:1976 | ALUMINUM HYDROXIDE GEL WITH MAGNESIUM TRISILICATE |
| PPP-G-2919 Base Document:1997 | GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF |
| MIL-P-25621 Revision B:1974 | PRESERVATION, PACKAGING AND PACKING OF RUBBER AND NYLON FUEL, OIL AND WATER PLUS ALCOHOL CELLS |
| MIL-G-13734 Revision B:1968 | GERMICIDE, QUARTERNARY AMMONIUM TYPE |
| MIL S 37320 : A | SODIUM FLUORIDE TABLETS USP |
| MIL-M-37348 Revision A:1976 | MEDRYSONE OPHTHALMIC SUSPENSION USP |
| MIL-H-53096 Base Document:1990 | HOSES & HOSE ASSEMBLIES, ELASTOMER, RUBBER, LIQUID FUEL, NON-COLLAPSIBLE, LOW TEMPERATURE |
| MIL-N-37562 Base Document:1976 | NEOMYCIN SULFATE, HYDROCORTISONE, AND POLYMYXIN B SULFATE OPHTHALMIC SUSPENSION |
| MIL-I-37752 Base Document:1978 | IMIPRAMINE HYDROCHLORIDE TABLETS, USP |
| MIL-C-37520 Base Document:1977 | CHLOROQUINE PHOSPHATE TABLETS USP |
| MIL-C-87230 Revision A:1989 | Coveralls, Flyer\'s, CWU-64/P (No S/S Document) |
| MIL O 37597 : 0 | OXYMETAZOLINE HYDROCHLORIDE NASAL SOLUTION, USP |
| MIL H 49078 : 0 | HANDSET H-250( (/U |
| CCC-P-86 Revision E:1971 | PADDING, COTTON, STITCHED ROVING |
| O-A-548 Revision D:1974 | ANTIFREEZE COOLANT, ENGINE, ETHYLENE GLYCOL, INHIBITED, CONCENTRATED |
| L-F-475 Revision A:1965 | FLOOR COVERING VINYL, SURFACE (TILE AND ROLL), WITH BACKING |
| MIL-DTL-613 Revision D:2014 | Grapnels, Marine, Trip Wire, and Crash Truck |
| MIL-DTL-87161 Revision G:2015 | WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT APPLICATION |
| MIL-J-83388 Revision E:1992 | JACKETS, FLYERS, COLD WEATHER |
| MIL F 24385 : F | FIRE EXTINGUISHING AGENT, AQUEOUS FILM FORMING FOAM, (AFFF) LIQUID CONCENTRATE, FOR FRESH AND SEA WATER |
| MIL-I-38121 Revision C:1989 | INDICATOR, PRESSURE, EGU-9/A |
| MIL-C-22362 Revision D:1986 | CARTRIDGE, IMPULSE, MK 18 MOD O |
| MIL P 18761 : C | PRIMER, PERCUSSION, MK 22, MOD 2 |
| ASTM C 659 : 1990 : R2014 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels (Withdrawn 2019) |
| MIL-G-53010 Base Document:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 100 KW, 50/60 HERTZ, PU-495B/G |
| MIL-C-18096 Revision A:1969 | CHAIN, STUD, LINK ANCHOR, DIE LOCK TYPE, HIGH STRENGTH, NON MAGNETIC |
| MIL T 82835 : NOTICE 1 | TAPE, FOAM |
| MIL-P-87938 Base Document:1984 | PEROXIDE METHYL ETHYL KETONE, TECHNICAL |
| MIL-DTL-11922 Revision F:2016 | SCARF, BRANCH OF SERVICE, BIB TYPE |
| MIL C 21083 : D | COAT, MAN'S: SERVICE, SUMMER AND WINTER, OFFICER'S USMC |
| MIL-C-82891 Base Document:1993 | CARTRIDGE, IMPULSE, MARK 14 MOD 1 |
| MIL-U-46126 Base Document:1968 | URANIUM ALLOY FOR BODY SECTION CENTER OF AMMUNITION COMPONENTS |
| MIL-C-85254 Base Document:1981 | CHARGE, LINEAR SHAPED |
| VV-G-632 Revision B:1989 | GREASE, INDUSTRIAL, GENERAL PURPOSE |
| MIL-C-51211 Revision B:1967 | CALCULATOR, DOWNWIND TOXIC VAPOR HAZARD, POINT SOURCE, ABC-M2 |
| MIL-P-82744 Base Document:1985 | PACKING, PREFORMED, OTTO FUEL COMPATIBLE, (CODE IDENT 53711) |
| MIL-C-36611 Base Document:1969 | |
| MIL-L-28654 Revision C:1988 | LIFTING, LAUNCHING AND SIDE CARRYING EQUIPMENT FOR PONTOONS ON 1179 CLASS LST VESSELS |
| GG-S-636 Revision B:1957 | SPLINT, WIRE, LADDER |
| MIL-S-25948 Revision J:1984 | SUNGLASSES, HGU-4/P (WITH CASE) |
| GGG-B-0060 Revision A Interim Revision:1966 | BAG, TOOL SATCHEL |
| MIL-L-7768 Revision B:1981 | LIGHT, DESK, AIRCRAFT |
| MIL-C-12889 Revision A:1957 | CAPACITORS, BY-PASS, RADIO-INTERFERENCE REDUCTION, PAPER DIELECTRIC, AC AND DC, (HERMETICALLY SEALED IN METALLIC CASES) GENERAL SPECIFICATION FOR |
| GGG-L-001345 Base Document:1967 | LEAD JOINT RUNNER |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-P-15047 Revision C:1971 | PLASTIC MATERIAL, LAMINATED THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN |
| GGG-F-570 Revision A:1966 | FORCEPS, SHEET HOLDER |
| MIL-C-44026 Base Document:1980 | CASE, LASER PROTECTIVE SPECTACLES |
| MIL-T-26561 Revision C:1984 | TESTER, TYPE MA-2 RECEPTION COUPLING BREAK-AWAY FORCE, PORTABLE |
| AA-F-360 Base Document:1956 | FILING CABINETS, STEEL, MAP AND PLAN (SECTIONAL) |
| GG-F-00336 Revision G:1976 | FILE AND REAMER, PULP CANAL, DENTAL, STANDARDIZED |
| MIL M 28837 : 0 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-R-8236 Revision F:1995 | REEL, SHOULDER HARNESS, INERTIA LOCK |
| MIL-B-36558 Revision B:1992 | BEDS, ADJUSTABLE |
| MIL-A-51372 Base Document:1973 | ADAPTER, BOMB CLUSTER, 750 POUND, M30E2 |
| MIL-M-19719 Revision A:1960 | METHYL CENTRALITE (FOR AMMUNITION USE) |
| MIL-S-51296 Base Document:1967 | SURVIVAL KIT, AIRMAN S, SEEK-1 |
| MIL-P-52854 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 30 KW, 50/60 HERTZ, AN/MJQ-10A |
| UU-P-553 Revision C:1976 | PAPER, WRAPPING, TISSUE |
| MIL-E-37437 Base Document:1976 | ERGOTAMINE TARTRATE INJECTION USP |
| MIL-C-37411 Revision A:1976 | CLINDAMYCIN PHOSPHATE INJECTION NF |
| ASTM E 785 : 1981 : R2001 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| MIL W 83779 : B | WATER INDICATING PASTE, METRIC |
| GGG-J-1564 Revision C:1992 | JACKS, DOLLY TYPE, HYDRAULIC, AUTOMOTIVE |
| MIL S 5765 : F | STRAND, WIRE ROPE, ARMORED STEEL |
| MIL I 27197 : C | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED |
| MIL-C-81703 Base Document:1971 | CONNECTOR, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| MIL-O-23678 Revision B:1982 | Oxygen Systems, Portable, High Pressure, Aircraft |
| MIL-S-44384 Base Document:1989 | Suit, Contamination Avoidance, Liquid Protection (Scalp) (No S/S Document) |
| MIL-S-29574 Base Document:1989 | SEALING COMPOUND, POLYTHIOETHER, FOR AIRCRAFT STRUCTURES, FUEL AND HIGH TEMPERATURE RESISTANT, FAST CURING AT AMBIENT AND LOW TEMPERATURE |
| PPP-F-690 Revision D:1981 | FROZEN FRUIT, FROZEN FRUIT JUICES, AND FROZEN VEGETABLES, PACKAGING OF |
| QQ-S-781 Revision H:1974 | STRAPPING, STEEL, AND SEALS |
| MIL-A-28716 Base Document:1969 | AMPLIFIER, AUDIO FREQUENCY, AM-3729()/SR |
| DDD-C-001023 Base Document:1966 | CUSHION, CARPET AND RUG (HAIR FELT AND RUBBER COATED JUTE AND ANIMAL HAIR OR FIBER) |
| MIL-P-13607 Revision B:1975 | PADDING MATERIAL, RESILIENT (FOR PACKAGING OF AMMUNITION) |
| MIL H 26626 : D | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, OXYGEN |
| SAE AMSC6183B : 2013(S2019) | CORK AND RUBBER COMPOSITION SHEET; FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| MIL-A-5885 Revision D:1987 | ACCELEROMETER, AIRCRAFT |
| ISA RP60.11 : 1991 | CRATING, SHIPPING, AND HANDLING FOR CONTROL CENTERS |
| MIL-L-37641 Base Document:1978 | LIDOCAINE HYDROCHLORIDE INJECTION, USP |
| MIL-A-47318 Revision A:1990 | ADHESIVE, COPOLYMER POLYURETHANE |
| HH-I-1972-5 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE BOARD ON BOTH SIDES OF THE FOAM |
| MIL-S-51309 Base Document:1968 | SODIUM CHLORATE, ANALYZED REAGENT |
| MIL-K-37369 Revision A:1977 | KETAMINE HYDROCHLORIDE INJECTION NF VETERINARY |
| MIL T 82831 : NOTICE 1 | |
| MIL-C-37678 Base Document:1978 | CHLOROQUINE HYDROCHLORIDE INJECTION, USP |
| MIL-C-24920 Revision A:1988 | COAT, ALL WEATHER, MAN'S WITH REMOVABLE LINER |
| MIL-S-51294 Base Document:1968 | STANNIC CHLORIDE, ANHYDROUS, ANALYZED REAGENT |
| MIL-I-27677 Revision E:1990 | INDICATOR, LIQUID OXYGEN QUANTITY |
| MIL M 5794 : B | MICROPHONE, UNIT M 6A/UR AND MICROPHONE CARBON M 51/UR |
| MIL-S-43939 Base Document:1976 | SHIRT, MAN'S, POLYESTER COTTON, DURABLE PRESS |
| MIL-C-47002 Revision A:1991 | COATING, POLYURETHANE, SINGLE COMPONENT SYSTEM |
| MIL-A-8243 Revision D:1985 | ANTI-ICING AND DEICING-DEFROSTING FLUIDS |
| MIL-H-37755 Base Document:1978 | HYDROXYZINE PAMOATE CAPSULES, NF |
| MIL-M-49199 Revision A:1985 | Microphone, Linear M-162/AIC General Specification for |
| MIL-B-2885 Revision F:1987 | BOOTS, FIREMEN'S |
| MIL C 38214 : B | COMPASS, MAGNETIC,MOUNTED |
| K-P-146 Revision E:1979 | TARPAULINS, COTTON DUCK, FWWMR |
| MIL B 18381 : D | BOILER, STEAM, HIGH PRESSURE, NAVAL SHIP PROPULSION |
| MIL-R-10985 Revision A:1956 | REEL, AUTOMATIC TAKE-UP, EXTENSION CABLE, 24-VOLT, D.C |
| MIL-T-38350 Revision D:1992 | TROUSERS, PARARESCUE CWU-15/P |
| P-C-438 Revision A Base Document:1963 | CLEANING COMPOUND, OPTICAL LENS |
| MIL-C-12038 Revision C:1982 | CHLOROBENZENE, TECHNICAL |
| MIL-S-36405 Base Document:1965 | SODIUM OXACILLIN CAPSULES 48S |
| MIL-H-37517 Base Document:1977 | HYDROXYZINE HYDROCHLORIDE TABLETS NF |
| MIL-L-36387 Revision A:1977 | LIDOCAINE OINTMENT USP |
| MIL-T-37156 Revision A:1975 | TRIFLUOPERAZINE HYDROCHLORIDE TABLETS NF |
| MIL-O-37598 Base Document:1977 | OXYPHENBUTAZONE TABLETS, NF |
| MIL-L-37831 Base Document:1977 | LEVOTHYROXINE SODIUM TABLETS, USP |
| MIL-D-37555 Base Document:1977 | DIHYDROERGOCORNINE, DIHYDROERGOCRISTINE AND DIHYDROERGOKRYPTINE MESYLATES TABLETS |
| MIL-C-37350 Revision A:1978 | CETYLPYRIDINIUM CHLORIDE LOZENGER NF |
| MIL-N-14411 Revision C:1977 | NICKEL IRON ALLOY, HIGH MAGNETIC PERMEABILITY SHEET, STRIP, ROD, BAR, AND WIRE |
| MIL-T-45309 Revision E:1983 | TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF |
| MIL-P-9388 Revision B:1986 | PUMP, PRESSURE, OIL FREE AIR TYPE MA-2 |
| MIL-DTL-23599 Revision C:2017 | Hook, Rescue |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| MIL-PRF-24002 Base Document:1964 | Parachute Packs; General Specifications for (No S/S Document) |
| MIL-D-19399 Base Document:1956 | DRIVE, ANTENNA, PATTERN CONTROL, FOR AS-473/ASB-1 (BOARD DRAWINGS 776376, 776520) |
| DOD D 24577 : 0 | DISTILLER SCALE PREVENTIVE TREATMENT FORMULATIONS |
| MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
| MIL-F-36271 Base Document:1964 | FOOTPRINTER, INFANT IDENTIFICATION, DISPOSABLE, 50S |
| MIL-F-8839 Revision A:1988 | Fittings, Lubrication Drive Type |
| MIL-H-36376 Revision B:1971 | HOLDER, MICROPOROUS BACTERIAL FILTERING DISK |
| MMM A 178 : A | ADHESIVE, PAPER LABEL, WATER RESISTANT |
| ASTM C 428/C428M : 2005 : R2011 : EDT 1 | Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe |
| MIL-C-51090 Revision A:1963 | CASEIN HYDROLYSATE |
| MIL C 51335 : B NOTICE 2 | CANISTER, 105MM, CS, XM8 |
| MIL P 45952 : 0 | PIN,QUICK RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-T-24270 Revision B:1983 | THERMOWELLS FOR THERMOMETERS AND ELECTRICAL TEMPERATURE SENSORS GENERAL SPECIFICATION FOR |
| MIL-A-3029 Revision A:1989 | ASPHALT, WATERPROOFING (FOR USE IN MANUFACTURE OF FIBER AMMUNITION CONTAINERS) |
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL-T-21669 Base Document:1958 | TEST SET, MARK 25 MOD 1 |
| DOD C 85045 : C | CABLE, FIBER OPTICS, GENERAL SPECIFICATION FOR (METRIC) |
| MIL P 26514 : F | POLYURETHANE FOAM, RIGID OR FLEXIBLE, FOR PACKAGING |
| MIL-L-82661 Base Document:1977 | LECITHIN, TECHNICAL |
| MIL V 51239 : B | VEGETATION CONTROL AGENT, ORANGE |
| MIL-C-293 Revision B:1974 | CALCIUM CARBONATE |
| GGG-T-546 Base Document:1955 | TONGS, BLACKSMITHS |
| MIL-B-81502 Revision B:1980 | BATTERY, SILVER ZINC ALKALI, GEN |
| MIL F 83861 : B | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE, TYPE 1I, SYSTEMS GENERAL SPECIFICATION FOR |
| MIL P 8116 : B | PUTTY, ZINC CHROMATE, GENERAL PURPOSE |
| MIL-P-14536 Base Document:1957 | Polyisobutylene Binder |
| MIL C 14055 : E | CUP, HYDRAULIC BRAKE ACTUATING CYLINDER: SYNTHETIC RUBBER |
| MIL A 52512 : A NOTICE 1 | AIR CONDITIONERS: VERTICAL, COMPACT 6,000 BTU/HR |
| GG-C-131 Revision C:1977 | CASSETTES, RADIOGRAPHIC FILM (MEDICAL) |
| MIL-L-43498 Revision D:1990 | Liner, Cold Weather Trousers, Field (No S/S Document) |
| MIL-T-38473 Revision A:1972 | TIMER, PRECISION, BOMBING, 0 - 30 MINUTES |
| MIL R 39002 : 0 | RESISTOR, VARIABLE, WIREWOUND, SEMI PRECISION, GENERAL SPECIFICATION FOR |
| MIL-R-38213 Revision B:1983 | RAINCOAT, MANS, LIGHTWEIGHT, BLUE |
| MIL DTL 46746 : E | CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-R-12540 Revision B:1967 | RECTIFIER, METALLIC RA-91 |
| TT-W-156 Revision B:1972 | WATER-REPELLENT COMPOUND, TEXTILE FINISH |
| MIL B 371 : F | BRAID, TEXTILE, TUBULAR |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MIL-B-53081 Base Document:1988 | BERM LINER ASSEMBLIES |
| MIL-C-44371 Revision A:1991 | Coat, Aircrew, Combat (No S/S Document) |
| MIL A 18357 : 0 | ANTENNA AT-145B/A |
| MIL-T-22047 Base Document:1959 | TEST SET MARK 27 MOD 1 |
| MIL-W-83970 Revision B:1981 | Wing and Rolleron Assembly, AIM-9 |
| MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
| MIL-N-37996 Base Document:1985 | NITROUS OXIDE GAS USP HIGH PRESSURE, CYLINDER |
| MIL-J-87037 Revision D:1988 | JUMPER, MAN'S, WHITE |
| MIL-T-63222 Base Document:1977 | TRAINER, FIELD ARTILLERY, 14.5MM, M31 |
| MIL-S-27447 Revision A:1976 | SURVIVAL KIT, PARACHUTE PACK SRU-16/P |
| MIL-C-8605 Revision B:1990 | CAP, PRESSURE FUEL SERVICING |
| MIL-C-24930 Base Document:1987 | CAP, COLD WEATHER |
| MIL-DTL-24709 Revision A:2018 | PADS, DISTRIBUTED ISOLATION MATERIAL, TYPE R-50-21/64 |
| MIL-T-52956 Revision A:1984 | TEST SET, POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-427 |
| MIL-H-24520 Base Document:1975 | MILITARY SPECIFICATION - HOSE AND HOSE ASSEMBLY FOR WATER COOLING OF ELECTRONIC EQUIPMENT |
| MIL E 85726 : A | ENCLOSURE, STANDARD AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR |
| MIL H 52471 : D | HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-52369 Revision B:1991 | TOWER ASSEMBLY, CABLEWAY, MEDIUM |
| MIL C 44404 : 0 | COMMAND POST, TENT, STANDARDIZED INTEGRATED COMMAND POST SYSTEM |
| MIL-B-52467 Revision C:1981 | BAR, CARRYING LIGHT TACTICAL BRIDGE |
| MIL T 28778 : 0 | TRANSFORMER, POWER, STEP UP 3-PHASE, GENERAL SPECIFICATION FOR |
| MIL-DTL-31010 Base Document:1995 | JACKET, AIRCREW, COLD WEATHER, WITH REMOVABLE LINER, AND HOOD |
| MIL-L-31007 Base Document:1994 | LINER, AIRCREW, BATTLEDRESS, UNIFORM (COAT AND TROUSERS) |
| MIL B 29378 : A | BELT, MAN'S: CEREMONIAL, OFFICERS |
| MIL-A-38140 Revision B:1977 | ALTIMETER, PRESSURE AAU-16/A |
| MIL-B-14075 Revision B:1975 | BAG, COOPER'S TOOLS |
| MIL B 81757 : C | BATTERIES & CELLS STORAGE, NICKEL CADMIUM, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL I 85547 : B | IGNITER, ROCKET MOTOR, PVU-3/E |
| MIL C 27536 : B | COUPLING, CLAMP, GROOVED, V-BAND |
| GG-R-550 Revision B:1981 | ROD, STADIA, FOLDING, WITH CASE |
| MIL F 0051068 : E | FILTER, PARTICULATE, HIGH-EFFICIENCY, FIRE RESISTANT |
| MIL-A-29420 Base Document:1985 | AMPLIFIER-CONVERTER: AM-6879/URC |
| MIL-I-8691 Revision A:1955 | INDICATOR, AZIMUTH, ID 307/ARN [ASG] |
| MIL-C-0010244 Revision H:1978 | CRYPTOGRAPHIC EQUIPMENT DESTROYER INCENDIARY, TH4, M2A1 |
| MIL-DTL-24231 Revision E:2013 | Connectors, Plugs, Receptacles, Adapters, Hull Inserts, and Hull Insert Plugs, Pressure-Proof, General Specification for |
| ASTM D 2282 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| GG-C-2736 Revision A:1987 | CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION) |
| MIL-S-87214 Revision B:1992 | SHIRTS, MEN'S, LONG AND SHORT SLEEVES, POLYESTER/COTTON (DURABLE PRESS) |
| O-S-642 Revision G:1993 | SODIUM PHOSPHATE, TRIBASIC, ANHYDROUS, DODECAHYDRATE, & MONOHYDRATE, TECHNICAL |
| O-C-265 Revision C:1991 | CHEMICAL, ANALYTICAL, GENERAL SPECIFICATION FOR |
| MIL-I-82799 Base Document:1989 | INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE |
| GEIA HB 649 : 2005 | CONFIGURATION MANAGEMENT STANDARD IMPLEMENTATION GUIDE |
| MIL-DTL-32333 Base Document:2009 | ARMOR PLATE, MAGNESIUM ALLOY, AZ31B, APPLIQUE |
| MIL-T-37757 Base Document:1978 | TESTOSTERONE ENANTHATE AND ESTRADIOL VALERATE INJECTION |
| MIL-G-25597 Revision D:1973 | Gyroscope, Displacement, Roll and Pitch, Type MD-1 |
| DDD-W-80 Revision E:1987 | WASHCLOTH, TERRY, COTTON |
| MIL-B-10930 Revision C:1983 | BAG, SIGNAL EQUIPMENT, WATERPROOF |
| MIL-I-83262-1 Revision A:1987 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-31A/A |
| DOD-C-24654 Base Document:1985 | COATINGS, EPOXY, PORTABLE WATER TANKS (METRIC) |
| MIL-STD-40076 Base Document:1997 | Preservation and Packing of Rocket and Missile Systems Equipment for Shipment |
| MIL-P-44305 Base Document:1988 | PLASTIC FILM, FLEXIBLE, POLYAMIDE AND POLYETHYLENE |
| PPP-P-1132 Revision C:1983 | PACKAGING OF WOOLLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS |
| MIL H 44105 : B | HATS, SUN, HOT WEATHER |
| AA-W-001950 Base Document:1975 | WARDROBE WITH ACCESSORY PIECES, WOOD, STEEL FRAME |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| MIL-T-37452 Base Document:1976 | TRIAMCINOLONE DIACETATE SUSPENSION, STERILE NF |
| MIL-E-37715 Base Document:1978 | EPINEPHRINE INJECTION, USP |
| MIL P 17869 : A | PUMPS AND MOTORS, POWER, OIL HYDRAULIC (NAVAL SHIPBOARD USE) |
| MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
| MIL-B-28873 Base Document:1983 | BLOWERS, ELECTRONICALLY COMMUTATED BRUSHLESS, DIRECT CURRENT, (ECDC) MOTOR DRIVEN, FOR COOLING ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL-E-82803 Base Document:1989 | EXPLOSIVE, THIN LAYER |
| DOD D 23443 : B | DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL |
| MIL-C-23315 Revision A:1971 | CROWN, SERVICE CUP |
| MIL-D-15390 Revision L:1987 | DRAWERS, EXTREME COLD WEATHER |
| MIL C 3607 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES PULSE GENERAL SPECIFICATION FOR |
| MIL-V-82466 Base Document:1967 | VACUUM-AIR-NITROGEN DISTRIBUTION SYSTEM |
| MIL-P-27408 Revision A:1971 | MILITARY SPECIFICATION PROPELLANT, MIXED OXIDES OF NITROGEN |
| MIL-S-81238 Base Document:1965 | SODIUM DIOCTYL SULFOSUCCINATE |
| MIL-I-82787 Base Document:1990 | IGNITER ASSEMBLY, ROCKET MOTOR MK 104 |
| SAE ARP 5794 : 2014 | CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
| MIL-J-21708 Revision G:1987 | JACKET, COLD WEATHER |
| MIL-T-87062 Revision B:1987 | Trousers, Utility, Men\'s, Denim (No S/S Document) |
| ASTM D 4689 : 2012-10 | SPECIFICATION FOR ADHESIVE, CASEIN-TYPE |
| MIL-C-87179 Base Document:1984 | COATING, PROTECTIVE, SOLVENT REMOVABLE, FOR MICROCIRCUITS |
| SS-S-200 Revision E:1984 | SEALANT, JOINT, TWO COMPONENTS, JET BLAST RESISTANT, COLD APPLIED, FOR PORTLAND CEMENT CONCRETE PAVEMENT |
| MIL-B-28617 Revision C:1977 | BOOMS, FLOATING BARRIER, OIL (FOR HARBOR USE) |
| SS-S-1614 Revision A:1984 | SEALANTS, JOINT, JET-FUEL-RESISTANT, HOT-APPLIED, FOR PORTLAND CEMENT AND TAR CONCRETE PAVEMENTS |
| MIL-C-29136 Base Document:1974 | CAP, FOOD HANDLER'S |
| MIL C 17605 : C | CHARCOAL, ACTIVATED, UNIMPREGNATED |
| ASTM F 1673 : 2010 | Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ASTM A 48/A48M : 2003 : R2008 | Standard Specification for Gray Iron Castings |
| MIL-T-12442 Revision D:1992 | TOWER, CABLE ANCHOR |
| ASTM C 220 : 1991 : R2015 | Standard Specification for Flat Asbestos-Cement Sheets (Withdrawn 2021) |
| MIL-C-47238 Revision A:1987 | CABLE, ELECTRICAL, SHIELDED AND JACKETED, SPECIAL PURPOSE |
| MIL-P-37462 Base Document:1976 | PENTAZOCINE LACTATE INJECTION, USP |
| MIL-B-28635 Revision D:1990 | BOOKSHELF FOR BUNK BED |
| MIL-DTL-19803 Revision G:2007 | CONVERTER, LIQUID OXYGEN, 10-LITER, GCU-24A/A |
| BB-A-1034 Revision B:1985 | COMPRESSED AIR, BREATHING |
| SAE AMS B 20148 : 2016 | BRAZING SHEET, ALUMINUM ALLOY |
| MIL-C-0016809 Revision C:1969 | CASE, MEDICAL INSTRUMENT AND SUPPLY SET, NONRIGID, NO. 4 |
| MIL-P-46122 Revision B:1975 | PLASTIC MOLDING MATERIAL AND PLASTIC EXTRUSION MATERIAL, POLYVINYLIDENE FLUORIDE POLYMER AND COPOLYMER |
| MIL-B-43255 Revision A:1975 | BAG, PLASTIC, ENTOMOLOGICAL SPECIMENS |
| MIL-P-14790 Base Document:1968 | PLASTIC SHEET AND STRIP (POLYOLEFIN) (FOR USE IN AMMUNITION) |
| GGG-C-291 Revision A:1963 | CHALK LINE AND REEL (SELF-CHALKING) |
| MIL-H-12240 Revision A:1958 | HYDROMETER, SYRINGE, BATTERY TS-765()/U |
| MIL-I-6726 Revision B:1966 | Inclinometer, Aircraft |
| MIL B 0043998 : C | BATH UNIT, AUTOMATED, MULTI-HEAD |
| DOD-C-82656 Base Document:1977 | Carbon Black, Thermal |
| MIL-B-8568 Revision B:1967 | BINOCULAR, PRISMATIC, HAND-HELD [FOR AERONAUTICAL USE] 7 X 50 AND 6 X 42 WIDE FIELD [ASG] |
| JJJ-L-821 Revision A:1969 | LITHOGRAPHIC PLATE PRESERVING GUM |
| MIL A 46192 : B | ALUMINUM ALLOY ARMOR ROLLED PLATE (1/2 TO 4 INCHES THICK), WELDABLE (ALLOY 2519) |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| TT-A-511 Revision E:1992 | AMYL ACETATE, TECHNICAL |
| MIL S 25879 : C | SWITCH, RADIO FREQUENCY TRANSMISSION LINE SA-521A/A |
| MIL-L-80005 Revision A:1970 | LAPPING MACHINE, METALWORKING, HIGH PRECISION, FLAT SURFACES, SINGLE FACE, FREE ABRASIVE TYPE |
| MIL H 8790 : D | HOSE ASSEMBLY, RUBBER HYDRAULIC HIGH PRESSURE [3,000 PSI] |
| QQ-A-1876 Base Document:1974 | ALUMINUM FOIL |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| MIL R 62220 : B | RECOVERY VEHICLE, FULL TRACKED, MEDIUM, M88A1, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-C-104 Revision C:1992 | CRATES, WOOD: LUMBER AND PLYWOOD SHEATHED, NAILED, AND BOLTED |
| MIL-F-37686 Base Document:1978 | FLUOROURACIL INJECTION, USP |
| MIL-STD-361-5 Base Document:1992 | MANUALS, TECHNICAL: REQUIREMENTS FOR PACKAGING |
| MIL-T-44291 Base Document:1987 | TROUSERS, MAN'S: HOSPITAL DUTY UNIFORM (HDU) |
| MIL-S-20552 Revision B:1983 | SODIUM AZIDE, TECHNICAL (METRIC) |
| FF-B-584 Revision F:1989 | BOLTS, FINNED NECK, KEY HEAD, MACHINE, RIBBED NECK, SQUARE NECK, TEE HEAD |
| MIL-C-10750 Revision J:1988 | COAT, FIREMEN'S |
| MIL L 43432 : A | LEATHER, PACKAGING AND PACKING OF |
| ZZ-R-765 Revision E:1991 | RUBBER, SILICONE; RUBBER SHEET SOLID |
| MIL T 29112 : C | TRUNKS, SWIMMERS |
| ASTM F 794:2003 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| MIL A 23941 : A | ADHESIVE, EPOXY TYPE, TWO PART |
| MIL-C-10320 Revision E:1982 | COVER, LEVEL ROD, PHILADELPHIA: CANVAS |
| MIL C 12000 : H | CABLE, CORD, AND WIRE, ELECTRIC; PACKAGING OF |
| MIL P 0037649 : NOTICE 1 | PETROLATUM, WHITE, USP |
| MIL-M-29355 Base Document:1975 | MANUAL, TECHNICAL, OPERATION AND MAINTENANCE INSTRUCTIONS FOR OPERATORS OF VARIOUS TYPES OF EQUIPMENT PREPARATION OF |
| HH-I-1972 Base Document:1981 | INSULATION BOARD, THERMAL, FACED, POLYURETHANE OR POLYISOCYANURATE |
| MIL-B-51097 Revision B:1964 | BACKING MATERIAL, C18 |
| MIL O 83179 : A | OVERCOAT, MAN'S, POLYESTER-WOOL-SERGE, 13 OUNCE, BLUE 1549 |
| A-B-2787 Base Document:1992 | BOOMS: FLOATING OIL AND DEBRIS CONTAMINANT, DEPLOYABLE (FOR HARBOR USE) |
| MIL-T-87038 Revision D:1990 | TROUSERS, MEN'S (BLUE, ENLISTED) |
| MIL-C-44211 Revision B:1995 | COATS, MEN'S, TROPICAL AND SERGE, POLYESTER/WOOL, ARMY GREEN 344, FUSIBLE |
| MIL B 131 : H | BARRIER MATERIAL, WATER VAPOR PROOF, GREASEPROOF, FLEXIBLE HEAT SEALABLE |
| MIL-A-23595 Revision D:1995 | AMPLIFIER, AUDIO FREQUENCY |
| DOD P 24583 : (1) | PACKING MATERIAL, GRAPHITIC, BRAIDED YARN (METRIC) |
| MIL-C-13739 Revision A:1965 | COMPOSITION, DELAY |
| GGG-H-496 Revision C:1961 | HOE; GARDEN, MORTAR, AND MORTAR MIXING |
| MIL-B-0051097 Revision D:1976 | BACKING MATERIAL, C18 |
| MIL-DTL-12560 Revision K:2013 | ARMOR PLATE, STEEL, WROUGHT, HOMOGENEOUS (FOR USE IN COMBAT-VEHICLES AND FOR AMMUNITION TESTING) |
| MIL-T-52823 Revision A:1983 | TARGET SET, SURVEYING |
| MIL-A-53009 Revision A:1991 | ADDITIVE, ANTIFREEZE EXTENDER, LIQUID COOLING SYSTEM |
| MIL T 0043654 : E | TROUSERS, SNOW CAMOUFLAGE, WHITE |
| MIL A 45564 : 0 | ASSAULT VEHICLE, FULL TRACKED, AMPHIBIOUS, XM733; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-52258 Revision C:1992 | PICKETS, STEEL |
| MIL-C-44417 Base Document:1991 | CARRIER, BODY ARMOUR, SMALL ARMS PROTECTIVE, AIRCREW, SURVIVAL |
| P-D-410 Revision C:1977 | DISHWASHING COMPOUND, HAND, (SYNTHETIC DETERGENT, SOLID AND LIQUID FORM) |
| MIL-I-22023 Revision D:1982 | INSULATION FELT, THERMAL AND SOUND ABSORBING FELT, FIBROUS GLASS, FLEXIBLE |
| MIL-T-81714 Revision E:1988 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
| ASTM F 1348/F1348M : 1991 : R2007 | Standard Specification for Pneumatic Rotary Descaling Machines |
| MIL-C-29106 Revision B:1982 | COAT, MANS WOOL WINTER |
| MIL-A-14064 Revision C:1980 | ADHESIVE: GRINDING DISK |
| MIL-T-27305 Revision C:1987 | TRANSFORMER AND INDUCTORS [AUDIO, POWER AND HIGH POWER PULSE] INDUCTOR, POWER TF5S04ZZ |
| MIL R 82619 : 0 | ROCKET MOTOR, MARK 81 MOD O (LOADED ASSEMBLY) |
| MIL-P-46185 Base Document:1983 | PLASTIC MOLDING & EXTRUSION MATERIALS, POLYETHERSULFONE |
| MIL-E-50008 Revision B:1982 | 2-ETHYLHEXANOIC ACID, TECHNICAL |
| MIL-T-37674 Base Document:1976 | THEOPHYLLINE AND GUAIFENESIN ELIXIR |
| DOD-F-87935 Base Document:1984 | FLUID, MAGNETIC PARTICLE INSPECTION, SUSPENSION MEDIUM (METRIC) |
| MIL-C-21723 Revision B:1994 | COMPOSITION CH-6 |
| MIL-B-52118 Revision E:1991 | BALK DECK |
| MIL-H-24497 Base Document:1974 | HYDROXYETHYL ETHYLENEDIAMINE TRIACETIC ACID (HEDTA) |
| MIL-C-38182 Revision C:1990 | COVER, SERVICE CAP, MANS WATER REPELLENT |
| DOD-D-51486 Revision A:1986 | DYE MIX, GREEN SMOKE 7 |
| MIL-T-82199 Base Document:1968 | TROUSERS, MEN'S, MESS, BLACK (OFFICER'S) |
| MIL C 11053 : F | COUPLING ASSEMBLIES, HOSE (CHEMICAL, 3/4 AND 1-INCH) |
| MIL-T-24103 Base Document:1964 | THERMOMETER, SELF INDICATING, 5 INCH SCALE SIZE, LIQUID IN GLASS, MERCURY |
| MIL-C-87972 Revision A:1987 | CASTERS, RIGID AND SWIVEL, GENERAL SPECIFICATION FOR |
| MIL-Z-81572 Base Document:1968 | Zirconium Oxide, Lime-Stabilized, Powder and Rod, for Flame Spraying |
| MIL-S-37438 Base Document:1976 | STIRRING BAR SET, MAGNETIC |
| MIL-B-43909 Base Document:1974 | BELLOWS, EXPANDABLE SHELTER (MUST) |
| MIL S 55620 : 0 | SUBSTRATES, CERAMIC, FOR DEPOSITION OF THIN FILM MICROCIRCUITS |
| MIL-C-10922 Revision G:1985 | CASE, PARACHUTIST'S, INDIVIDUAL WEAPONS, M-1950, ADJUSTABLE |
| MIL-M-81392 Base Document:1966 | MARKER, LOCATION, MARINE MK 25 AND MODS 2 AND 3 |
| MIL-B-51333 Base Document:1952 | BARIUM PERCHLORATE, ANHYDROUS, ANALYZED REAGENT |
| MIL-A-22847 Base Document:1961 | Air Refueling Store System, D-704 |
| SS-C-661 Revision A:1974 | CRAYON, MARKING |
| MIL-C-11009 Revision B:1968 | CLIP, CARTRIDGE, CARBINE, CAL. .30 |
| MIL-B-55298 Base Document:1965 | BAROGRAPH ML-563 /UM |
| SAE AMS R 5001 :1998(S2015) | RUBBER CELLULAR SHEET, MOLDED AND HAND-BUILT SHAPES; LATEX FOAM |
| MIL P 28809 : A | PRINTED WIRING ASSEMBLIES |
| MIL R 1229 : C | RUBBER SHEET PACKING, SOLID, WIRE CLOTH INSERTED, SYMBOL, 2354 |
| MIL-S-18538 Base Document:1955 | SIGNAL MINIATURE PRACTICE BOMB, MK 4 MOD 3 AND MOD 4 |
| MIL H 27516 : D | HOSE AND HOSE ASSEMBLY, NON-METALLIC, SUCTION AND DISCHARGE |
| DDD-P-56 Revision G:1994 | PAD, MATTRESS, POLYESTER BATTING, QUILTED, FLAT OR FITTED |
| MIL R 82635 : 0 | RUBBER SHEET, BUTYL, UNVULCANIZED |
| MIL-G-16959 Revision B:1967 | GASKET, METALLIC, BOILER, ECONOMIZER AND SUPERHEATER HANDHOLE |
| MIL-R-22628 Base Document:1964 | RESIN, CASTING, EPOXY, ALUMINUM FILLED |
| MIL-A-37049 Base Document:1974 | APRON, DENTAL, PLASTIC, DISPOSABLE |
| PPP-B-1358 Revision A:1973 | BAG, COTTON DUCK |
| DDD-B-151 Revision J:1988 | BEDSPREAD, COTTON, COTTON/RAYON, COTTON/POLYESTER OR POLYESTER/RAYON BLEND |
| MIL-E-17555 Revision H:1984 | ELECTRONIC AND ELECTRICAL EQUIPMENT, ACCESSORIES, AND PROVISIONED ITEMS (REPAIR PARTS); PACKAGING OF |
| MIL-H-36343 Revision B:1966 | HYDROMETERS, GRADUATED SCALE WITH THERMOMETER, API GRAVITY |
| MIL-B-55521 Revision C:1983 | BATTERIES, NONRECHARGEABLE, PACKING OF |
| MIL-C-1458 Revision C:1972 | COMB, DOG |
| MIL C 39028 : C | CAPACITORS, PACKAGING OF |
| MIL-M-37346 Revision A:1976 | METHYLERGONOVINE MALEATE INJECTION NF |
| MIL-S-87046 Revision A:1986 | SHIRT, UTILITY, MAN'S, POLYESTER/COTTON (CG) |
| MIL-C-3635 Revision C:1978 | COMPASS, DRAFTING, BEAM |
| MIL C 62015 : F NOTICE 1 | CARRIER, CARGO, FULL-TRACKED, M548 AND N548A1; AND CARRIER, ELECTRONIC WARFARE SYSTEMS, FULL-TRACKED SHIPMENT OF |
| MIL-A-17682 Revision E:1982 | ADHESIVE, STARCH |
| MIL C 55661 : B | CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837 ( )/U |
| MIL-C-13613 Base Document:1954 | Carbazole |
| MIL-O-37467 Base Document:1976 | OXACILLIN SODIUM FOR ORAL SOLUTION, USP |
| MIL-A-55671 Revision A:1970 | ANTENNA AS-1425 ()/GRC |
| MIL-B-9978 Revision A:1967 | BIOLOGICAL AGENT, SIMULANT, BACILLUS GLOBIGII: DISPENSER, AN-M1 |
| MIL-S-46383 Revision B:1970 | STRAP, WRIST: INSTRUMENT |
| MIL-D-52975 Base Document:1980 | DRAWING BOARD, ILLUMINATED, PORTABLE |
| MIL-P-22296 Revision B:1973 | PLASTIC TUBES AND TUBING, POLYTETRAFLUOROETHYLENE, (TFE-FLUOROCARBON RESIN) HEAVY WALLED |
| MIL-T-55402 Base Document:1974 | TRANSMITTER GROUP, SIMULATED RADIAC, HOT SPOT OT-52( )/T |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| MIL-P-37796 Base Document:1977 | POTASSIUM CHLORIDE TABLETS |
| MIL-R-52807 Revision B:1991 | ROLLER, TRANSOM, BAILEY BRIDGE |
| MIL-R-24159 Revision A:1983 | RECEPTACLE, CANISTER, CO 2 ABSORBENT |
| MIL-B-43436 Revision C:1976 | BAND, MARKER, BLANK, GENERAL SPECIFICATION FOR |
| MIL-D-3898 Revision B:1985 | Drafting Machine and Scales General Specification for |
| MIL-B-45389 Revision A:1979 | BULLDOZER, EARTH MOVING: TANK MOUNTING, M9; PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-4710 Revision E:2006 | CASE SET, TRANSPORT AND STORAGE |
| PPP-S-760 Revision B:1973 | STRAPPING, NONMETALLIC, (AND CONNECTORS) |
| KK-L-165 Revision C:1964 | LEATHER, CATTLEHIDE, VEGETABLE TANNED AND CHROME RETANNED, IMPREGNATED; AND SOLES |
| MIL-C-12103 Revision C:1963 | COMPUTER, STADIA, CIRCULAR SCALE |
| MIL-C-13125 Revision C:1983 | COMPOUND: MOUNTING FOR OPTICAL LENS BLANKS |
| MIL-H-45193 Revision D:1985 | HEATER, GUN TYPE, ELECTRIC |
| MIL-S-15573 Revision A:1952 | STRAINER, SEDIMENT, PIPELINE (FOR GASOLINE SERVICE) |
| MIL-S-2124 Revision K:1989 | SMOCK, GENERAL PURPOSE |
| GGG-W-686 Revision C:1969 | WRENCH TORQUE |
| MIL-B-44194 Revision A:1990 | BODY ARMOR, FRAGMENTATION PROTECTIVE, UNDERGARMENT, COMBAT VEHICLE CREWMEN'S |
| MIL-P-12420 Revision D:1991 | PLASTIC MATERIAL, CELLULAR, ELASTOMERIC |
| MIL-B-40028 Revision B:1976 | BAG, BARRIER WITH VOLATILE CORROSION INHIBITOR TREATED LINERS |
| MIL W 18723 : D | WAX, AIRCRAFT, WATERPROOF, SOLVENT TYPE |
| GGG-E-00930 Base Document:1963 | EXTRACTOR, ELECTRON TUBE (TONG TYPE) |
| HH-G-101 Revision E:1990 | GASKET, METALLIC-ENCASED |
| MIL-B-21442 Revision B:1963 | BATTERY, STORAGE, NICKEL-CADMIUM |
| MIL-G-51491 Revision A:1986 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A4 |
| MIL-T-85350 Revision B:1990 | TRANSMITTER, BEACON, LOCATOR T-1438/D |
| QQ-B-637 Revision A:1967 | BRASS, NAVAL, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS WITH FINISHED EDGES (BAR, FLAT WIRE, AND STRIP) |
| MIL-A-60091 Revision B:1988 | ADHESIVE FOR BONDING DEMOLITION CHARGES TO STRUCTURAL SURFACES |
| MIL-B-21154 Revision C:1991 | BELTS, MILITARY POLICE: COTTON WEBBING; WHITE |
| MIL-A-82654 Base Document:1977 | ALUMINUM POWDER, ATOMIZED, TECHNICAL |
| MIL-C-28858 Revision A:1985 | COUPLER GROUP, ANTENNA, OA-9123/SRC |
| MIL-S-38160 Revision B:1968 | Selector, Antenna C-4808/ARC |
| GGG-P-463 Revision C:1973 | PLATE, SURFACE, (GRANITE) |
| MIL-B-37163 Base Document:1975 | BANDAGE, COTTON, ELASTIC |
| MIL P 83497 : A | PROCEDURES FOR PREPARATION OF PROGRAMMED TAPES AND CARDS |
| P-B-172 Revision B:1973 | BELTS AND BANDS, ABRASIVE (COATED CLOTH, POWER MACHINE) |
| EE-E-911 Revision G:1971 | EXTRACTS, FLAVORING AND FLAVORS |
| MIL-C-83141 Revision A:1974 | COVERALLS, FLYER'S SUMMER, FIRE RESISTANT |
| MIL-A-63467 Base Document:1981 | ACETYLENE BLACK (FOR USE IN AMMUNITION) |
| MIL-C-601 Revision G:1971 | CYLINDER, CARBON DIOXIDE FILLED, TECHNICAL |
| AAA-B-105 Revision B:1970 | BALANCES, PRESCRIPTION |
| MIL-P-43045 Revision B:1974 | PLASTIC POTTING AND IMPREGNATING MATERIAL, POLYBUTENE |
| MIL-T-82298 Revision A:1980 | TAPE MEASURING, CLOTH, COTTON |
| MIL I 15379 : B NOTICE 1 | MILITARY SPECIFICATION - INHALATOR, DIVERS, FOR ADMINISTERING HELIUM OXYGEN DURING DECOMPRESSION |
| MIL-A-18889 Base Document:1955 | ARBOR, DEPTH CHARGE, MARK 7 MOD 3 |
| MIL C 20330 : A | CELLULOSE, WOODPULP (SULFATE) |
| MIL-HDBK-773 Revision A:2005 | ELECTROSTATIC DISCHARGE PROTECTIVE PACKAGING |
| MIL-H-3280 Revision E:1990 | HOIST, CHAIN, MANUALLY OPERATED, PACKAGING OF |
| GG-T-380 Base Document:1958 | |
| MIL-A-82690 Base Document:1980 | ARMING-FIRING DEVICE, ROCKET MOTOR, MARK 28 MOD 0 |
| MIL-P-584 Revision B:1967 | |
| MIL-T-18912 Revision A:1976 | TUBING, STEEL, FOR 3.25 INCH AND 5.0 INCH OD ROCKET MOTORS |
| GGG-E-936 Revision C:1967 | EXTRACTOR, SCREW (STUD AND PIPE), AND EXTRACTOR, TAP |
| MIL-I-60476 Revision A:1979 | IGNITER, MARK 125 MOD 5, LOADING ASSEMBLING AND PACKING |
| MIL I 7231 : B | INDICATOR, TRUE AIRSPEED, SYNCHRO REPEATER TYPE N 1 |
| MIL-P-43043 Revision C:1978 | PLASTIC MOLDING MATERIAL, PRE-MIX, POLYESTER, GLASS FIBER REINFORCED |
| L P 00665 : A NOTICE 1 | PROTECTOR, DUPLICATING STENCIL |
| AA-O-00235 Base Document:1962 | OFFICE FURNITURE, STEEL, SECTIONAL |
| TT-I-547 Revision A:1956 | INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES |
| MIL D 7850 : A | DOPE, CELLULOSE - ACETATE - BUTYRATE, FIRST COAT, FUNGICIDAL |
| MIL-R-82844 Base Document:1990 | RUBBER, POLYISOPRENE (NON-ASBESTOS) |
| MIL-E-6843 Revision C:1967 | ELECTRODE, WELDING, COVERED, LOW ALLOY STEEL (PRIMARILY FOR AIRCRAFT AND WEAPON APPLICATIONS) |
| MIL C 38359 : A | CABLE, POWER, ELECTRICAL, AIRPORT LIGHTING, CROSS-LINKED, POLYETHYLENE XLP |
| MIL-C-85122 Base Document:1980 | CARTRIDGE, 20 MM MARK 100 SERIES |
| GGG-P-446 Revision A:1964 | PLATE, LAPPING |
| MIL C 14610 : G | COVERALLS, EXPLOSIVE HANDLERS |
| MIL-R-19558 Revision A:1960 | REGULATOR, AIR, DEMAND, DIVER'S |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| MIL-M-7255 Revision B:1969 | MANOMETER, PRESSURE, DIFFERENTIAL AND ABSOLUTE TYPE E 1 |
| MIL-S-82858 Base Document:1986 | SILICONE DIOXIDE, MICROFINE |
| MIL-A-82834 Base Document:1986 | ADHESIVE, PASTE, ONE PART |
| MIL-C-21850 Revision C:1979 | COVERALLS, CATAPULT, CREWMEN'S |
| MIL-B-85667 Revision A:1991 | BOLT, SLEEVE, STRAIGHT SHANK, PROTRUDING AND FLUSH HEAD GENERAL SPECIFICATION FOR |
| MIL L 22690 : NOTICE 1 | LUBRICATION CHARTS, PLATES AND MANUALS, PREPARATION AND PRODUCTION OF |
| MIL-T-37329 Revision A:1976 | TEST KIT, BILIRUBIN DETERMINATION |
| MIL-P-37572 Revision A:1977 | PRIMAQUINE PHOSPHATE TABLETS, USP |
| HH-I-558 Revision C:1992 | INSULATION, BLANKETS, THERMAL (MINERAL FIBER, INDUSTRIAL TYPE) |
| SAE AS 81021 : 2016 | COPPER-BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510), STRIP |
| MIL-DTL-23806 Revision B:2007 | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, FOAM DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL B 5806 : F | BOX, SHIPPING, AND STORAGE, HELICOPTER BLADE |
| MIL-B-16008 Revision C:1965 | BRICK, INSULATION, HIGH TEMPERATURE, FIRE CLAY |
| SS-C-466 Revision E:1964 | CLOTH, THREAD, AND TAPE-ASBESTOS |
| AA-V-200 Revision A:1965 | VENETIAN BLINDS |
| GG M 181 : D | MEASURER, MAP |
| MIL-M-6867 Revision C:1969 | MAGNETIC INSPECTION UNITS |
| MIL L 44076 : A | LOWERING LINE ASSEMBLY |
| MIL-P-83310 Base Document:1971 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| NNN-C-688 Base Document:1962 | CRUCIBLE, IGNITION LABORATORY METAL |
| MIL-S-12991 Revision B:1971 | SURVEYING SET, TOPOGRAPHIC COMPANY, PACKAGING OF |
| MIL-I-27709 Revision A:1962 | INDICATOR, ATTITUDE ARU-14/A, REMOTE |
| P-S-651 Revision E:1974 | SODIUM ORTHOSILICATE, TECHNICAL |
| MIL-C-47068 Base Document:1974 | COATING, CONDUCTIVE, EPOXY, SILVER |
| MIL T 55248 : A | TEST SET, TELETYPEWRITER AN/UGM-1 ( ) |
| MIL I 37698 : NOTICE 2 | IDOXURIDINE OPHTHALMIC SOLUTION, USP |
| MIL I 47204 : 0 | INVERTER, POWER, STATIC |
| GGG-P-655 Revision B:1964 | PRICKER, SAILMAKER'S |
| MIL-S-52548 Revision A:1975 | SURVEYING SET, TRIANGULATION, PRINCIPAL OBSERVER AND SIGNAL TENDER PACKAGING OF |
| MIL P 62420 : 0 | PERISCOPE, TANK |
| MIL-E-5627 Revision B:1965 | EXTINGUISHERS, FIRE, CARBON DIOXIDE, PORTABLE |
| MIL-S-81246 Revision A:1988 | STABILIZER, ORGANIC-TIN-SULFUR |
| MIL C 47257 : C | COMPOUND, EPOXY, FILAMENT WINDING |
| MIL S 645 : C | STRIP METAL, CARBON STEEL, COLD ROLLED, DRAWING QUALITY, SPECIAL KILLED [FOR AMMUNITION COMPONENTS] |
| MIL-M-17556 Base Document:1953 | MOTOR, DIRECT CURRENT, FRACTIONAL HP (SHIPBOARD USE) |
| MIL-A-82802 Base Document:1989 | ADHESIVE AND SEALANT |
| CCC-S-00320 Base Document:1963 | SHEETING AND TAPE, REFLECTIVE; ADHESIVE BACKING |
| AA-C-001779 Revision G:1996 | FILING CABINET, STEEL, LATERAL AND FRONT TO BACK FILING, LEGAL AND LETTER SIZE MATERIAL, GENERAL OFFICE |
| MIL-T-37472 Base Document:1976 | TOLNAFTATE SOLUTION, USP |
| MIL G 52886 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60 KW, 400 HERTZ, PU-707 A/M |
| MIL-C-11334 Base Document:1951 | CHLORAMINE-T, REAGENT |
| MIL-DTL-46100 Revision E:2008 | ARMOR PLATE, STEEL, WROUGHT, HIGH-HARDNESS |
| MIL-E-17341 Revision C:1970 | ENGINE, GAS TURBINE, PROPULSION & AUXILIARY NAVAL SHIPBOARD |
| GG-S-921 Revision B:1958 | SYRINGE, LUER, (ALL-GLASS) |
| MIL-P-9024 Revision G:1972 | PACKAGING, MATERIALS HANDLING AND TRANSPORTABILITY, SYSTEM AND SYSTEM SEGMENTS GENERAL SPECIFICATION FOR |
| MIL-B-13164 Revision A:1973 | BRIDGE, FIXED, STEEL, HIGHWAY, SEMIPERMANENT, 90-FOOT TRUSS SPAN |
| MIL-G-87066 Revision A:1988 | GLOVES, CHEMICAL AND OIL PROTECTIVE |
| MIL-I-23951 Base Document:1964 | IGNITION MATERIAL, PELLETED, PYROTECHNIC |
| O-H-795 Base Document:1953 | HYDROFLUORIC ACID, TECHNICAL |
| MIL-D-89010 Base Document:1994 | DIGITAL BATHYMETRIC DATA BASE 5-MINUTE (DBDB5) |
| NASA MSFC RQMT 2918 : 2015 | REQUIREMENTS FOR ELECTROSTATIC DISCHARGE CONTROL |
| MIL-M-38706 Revision A:1984 | MULTIMETER |
| NASA MSFC SPEC 2491 : 1995 | AQUEOUS CLEANER SPECIFICATION |
| MIL-U-44435 Base Document:1992 | Underwear, Chemical Protective, Two Piece (Undershirt and Drawers) (No S/S Document) |
| MIL-T-8231 Revision A:1970 | TUBE, COPPER SILICON BRONZE, SEAMLESS, FOR AIRCRAFT |
| MIL-STD-1791 Revision C:2017 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| MIL-H-37420 Base Document:1976 | HYDROCORTISONE SODIUM SUCCINATE FOR INJECTION USP |
| MIL-D-51146 Base Document:1963 | DECONTAMINATING AGENT, BIOLOGICAL, ETHYLENE OXIDE PROPELLANT MIXTURE |
| MIL-S-13224 Revision A:1959 | SURVEYING SET, SUPPLEMENTARY EQUIPMENT TOPOGRAPHIC BATTALION: SET NO. 15 PACKAGING OF |
| OO-D-2854 Base Document:1994 | DITCHING MACHINE, WHEEL TYPE TRENCHER, CRAWLER-MOUNTED, DIESEL-ENGINE-DRIVEN |
| MIL-D-43699 Revision C:1987 | DRUMS, FABRIC, COLLAPSIBLE, (DRINKING WATER, 55-,250- & 500 GALLON CAPACITIES) |
| MIL F 55171 : A | FREQUENCY METER AN/USM-159()/U |
| MIL P 83207 : B | PITOT STATIC TUBE, NOSE BOOM, COMPENSATED, GENERAL SPECIFICATION FOR |
| MIL-T-83823 Base Document:1991 | TRUCK, FIRE FIGHTING (STRUCTURAL OR BRUSH STRUCTURAL) |
| MIL-P-63381 Base Document:1980 | PAPER, SHOT SHELL (FOR USE IN AMMUNITION) |
| MIL-A-23054 Revision A:1982 | ACOUSTIC ABSORPTIVE BOARD, FIBROUS GLASS PERFORATED FIBROUS GLASS CLOTH FACED |
| MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
| MIL-B-36502 Base Document:1966 | BOTTLE, STOPPER, PLASTIC, ROUND |
| MIL T 5780 : D NOTICE 1 | TRANSMITTER, PRESSURE, MANIFOLD 10-75 INCH MERCURY |
| GG D 00458 : C | DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE |
| MIL-A-3339 Revision C:1981 | Anchors, Sea, Life Raft |
| MIL W 87893 : A | WORKSTATION, ELECTROSTATIC DISCHARGE (ESD) CONTROL |
| MIL M 9950 : A NOTICE 1 | MISSILE COMPONENTS, LIQUID OXYGEN, LIQUID NITROGEN, GASEOUS OXYGEN, GASEOUS NITROGEN, INSTRUMENT AIR, HELIUM AND FUEL HANDLING SYSTEMS, CLEANING AND PACKAGING FOR DELIVERY |
| MIL-S-37204 Base Document:1975 | SULFACETAMIDE, SULFABENZAMIDE, SULFATHIAZOLE AND UREA CREA |
| MIL-C-37347 Base Document:1976 | CHLORPHENIRAMINE MALEATE, ASPIRIN, CAFFEINE, METHOXYPHENAMINE HYDROCHLORIDE, AND PHENACETIN TABLETS |
| TT-T-548 Revision F:1991 | TOLUENE, TECHNICAL |
| TT-P-1757 Revision B:1997 | PRIMER COATING, ALKYD BASE, ONE COMPONENT |
| MIL P 8184 : E | PLASTIC SHEET, ACRYLIC, MODIFIED |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| MIL-P-2018 Revision J:1993 | PAINT, FACE, CAMOUFLAGE |
| VV-G-671 Revision G:2014 | GREASE, GRAPHITE |
| MIL-L-14519 Revision C:1978 | LIMESTONE, PULVERIZED |
| O-S-801 Revision F:2001 | SULFURIC ACID, ELECTROLYTE (FOR STORAGE BATTERIES) |
| MIL-T-23624 Base Document:1962 | |
| TT-R-2918 Revision A:2001 | REMOVAL, PAINT, NO HAZARDOUS AIR POLLUTANTS (HAPS) |
| MIL-C-31006 Base Document:1994 | COAT, MAN'S |
| MIL-I-38338 Revision D:1991 | INDICATOR, OIL QUANTITY, CONTINUOUS TRANSMISSION, NUCLEONIC |
| MIL-C-27438 Revision G:1987 | COAT, MAN'S, SERVICE |
| GG-S-745 Revision A:1956 | STAPLERS AND STAPLES, PAPER FASTENING, OFFICE TYPE |
| MIL-C-82665 Base Document:1977 | CARBON BLACK |
| MIL T 82161 : B | TROUSERS, MEN'S, EVENING DRESS (OFFICER'S) |
| MIL-B-385 Revision G:1985 | BREAKERS, PAVING, PNEUMATIC-POWERED (7/8-INCH HEXAGON BY 2-3/4-INCH CHUCK AND 7/8-INCH HEXAGON BY 3-1/4-INCH CHUCK) |
| MIL-HDBK-1473 Revision A:1997 | Color and Marking of Army Materiel |
| MIL-T-26922 Revision D:1977 | TEST SET, ELECTRICAL POWER A/M24T-8() |
| MIL-B-83769 Revision D:1983 | BATTERY, STORAGE, LEAD ACID, GENERAL SPECIFICATION FOR |
| SAE AS 6451 : 2013 | SHIELDS, PROTECTIVE, AIRCRAFT AND MISSILES |
| MIL-C-13882 Base Document:1954 | CHARGE, EXPLOSIVE, SPRINGING FOR ROD, EARTH, BLAST-DRIVEN, M13 |
| MIL-H-44265 Revision A:1990 | HOOD, COMBAT VEHICLE CREWMENS (BALACLAVA) |
| O-S-639 Revision B:1984 | SODIUM PHOSPHATE, DIBASIC, ANHYDROUS, TECHNICAL |
| MIL-P-45051 Revision D:1985 | PRESS, CONNECTING ROD STRAIGHTENING, HYDRAULIC |
| MIL-S-85312 Base Document:1979 | SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| MIL-N-00494 Revision B:1984 | |
| MIL-B-43550 Revision A:1979 | BAG, WATER REPELLENT, SIGNAL EQUIPMENT, BG 102 VALIDATED JUN 1972 |
| MIL-C-27845 Revision C:1977 | COVERALLS, MEN'S, CMU-3/P |
| MIL P 19264 : B | PROPELLANT, BS-NACO, FOR THE 5"/54 CALIBER PROPELLING CHARGE |
| L-S-125 Revision B:1972 | SCREENING, INSECT, NONMETALLIC |
| ASTM C 296/C296M : 2000 : R2015 | Standard Specification for Asbestos-Cement Pressure Pipe (Withdrawn 2021) |
| MIL-S-64052 Base Document:1988 | SPRAY GUN, PAINT, HEAVY DUTY, PRESSURE FEED |
| MIL-C-87160 Revision A:1988 | COAT, WOMAN'S (PANTS SUIT) |
| ASTM A 818 : 2006 : R2016 | Standard Specification for Coppered Carbon Steel Wire |
| W-R-175 Revision D:1986 | REELS AND HUBS FOR MAGNETIC RECORDING TAPE, GENERAL SPECIFICATION FOR |
| MIL-B-17693 Revision E:1986 | BELT, COAT, MAN'S: POLYESTER WOOL |
| KKK-W-291 Revision G:2016 | WHEELBARROWS |
| MIL-P-6457 Revision E:1974 | POWER SUPPLY, METALLIC RECTIFIER TYPE, GENERAL SPECIFICATION FOR |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| ASTM D 5118/D5118M : 2015 : REDLINE | Standard Practice for Fabrication of Fiberboard Shipping Boxes |
| MIL C 8087 : C | CORE MATERIAL, FOAMED IN PLACE, URETHANE TYPE |
| MIL-G-37097 Base Document:1975 | GENTIAN VIOLET TABLETS |
| WW-H-001220 Base Document:1966 | HEAD SPRINKLER, (UNDERGROUND CONNECTED) |
| MIL-A-82950 Base Document:1995 | ACTUATOR, BELLOWS ATU-117/P |
| MIL-B-37823 Base Document:1977 | BENZENE HEXACHLORIDE, GAMMA LOTION, USP |
| MIL-D-37615 Base Document:1978 | DIMENHYDRINATE TABLETS, USP |
| MIL-T-37144 Revision A:1975 | THEOPHYLLINE AND GLYCERYL GUAIACOLATE CAPSULES |
| MIL-STD-1428 Base Document:1981 | CLEANING COMPOUNDS |
| MIL-C-37483 Base Document:1977 | CEPHALEXIN FOR ORAL SUSPENSION, NF |
| MIL T 8878 : D | TURNBUCKLE, POSITIVE SAFETYING |
| MIL N 37485 : NOTICE 1 | NEOMYCIN SULFATE, USP |
| MIL-O-37786 Base Document:1978 | OXACILLIN SODIUM CAPSULES, USP |
| MIL-B-37201 Base Document:1975 | BISACODYL SUPPOSITORIES, NF |
| MIL-C-37265 Revision A:1976 | CLOFIBRATE CAPSULES USP |
| MIL-P-37694 Base Document:1978 | PROPYLTHIOURACIL TABLETS, USP |
| MIL-C-23553 Revision B:1976 | CABLES, ELECTRICAL, ALUMINUM FOIL SHIELDED PAIRS |
| MIL-P-18711 Revision A:1955 | PRIMER, ELECTRIC, MARK 37 MOD 2 |
| MIL-D-82687 Base Document:1980 | DEVICE, ARMING FIRING, ROCKET MOTOR MARK 298 MOD O |
| A-A-59155 Base Document:2003 | Nitrogen, High Purity, Special Purpose |
| MIL F 85406 : 0 | FUSE SYSTEM, JOINT SERVICE ELECTRONIC BOMB FMU-139/B |
| MIL-B-44158 Revision B:1992 | BACON, SLICED, PRECOOKED |
| L-F-001641 Base Document:1971 | FLOOR COVERING TRANSLUCENT OR TRANSPARENT VINYL SURFACE WITH BACKING |
| MIL-C-10101 Revision F:1968 | CASES, FIELD, OFFICE MACHINE (PLYWOOD) |
| MIL-B-37859 Base Document:1978 | BETAMETHASONE BENZOATE GEL, USP |
| MIL-R-61001 Base Document:1989 | RACKS, STORAGE, LOADED PALLET |
| MIL V 85855 : 0 | VALVE, QUICK DISCONNECT, FOR THE PROTECTIVE ASSEMBLY, CHEMICAL, RADIOLOGICAL |
| MIL E 37226 : 0 | OESTROGENS CONJUGATED, CREAMS |
| MIL-C-11163 Revision A:1967 | CUPROUS OXIDE, ANALYZED REAGENT |
| ASTM C 1449/C1449M : 2005 : REV A | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| MIL-H-44302 Base Document:1987 | HOOD, BALACLAVA, EXTENDED COLD WEATHER |
| MIL-T-7305 Revision C:1987 | TRANSMITTER, PRESSURE TORQUE TYPE D 5 |
| AA-F-001165 Revision B Interim Revision:1989 | FURNITURE, METAL FRAME, LAMINATED PLASTIC SURFACED PANELS, CASE GOODS AND TABLES |
| MIL A 45225 : E | ALUMINUM ALLOY ARMOR, FORGED |
| MIL-A-37425 Base Document:1976 | ALUMINUM HYDROXIDE GEL, DRIED, TABLETS, U.S.P. |
| MIL-A-37380 Revision A:1978 | AMOXICILLIN FOR ORAL SUSPENSION, USP |
| MIL-S-16104 Revision B:1983 | |
| MIL-P-53125 Base Document:1992 | POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-P-26342 Revision B:1975 | PALLET BOX, FIBERBOARD, EXPENDABLE, FOR AIR SHIPMENT |
| MIL C 0043135 : G | CHICKEN AND CHICKEN PRODUCTS, COOKED, DEHYDRATED |
| MIL-C-14381 Revision A:1963 | CASES, FIRE DIRECTION SET, ARTILLERY |
| MIL-P-37299 Base Document:1975 | PYRIMETHAMINE TABLETS, USP |
| MIL-C-85257 Base Document:1981 | CORD ASSEMBLY, DETONATING |
| MIL R 3593 : D | REFRIGERATION AND COOLING EQUIPMENT [EXCLUDING HOUSEHOLD REFRIGERATORS] PACKAGING OF |
| MIL-T-55164 Revision C:1987 | TERMINAL BOARDS, MOLDED, BARRIER, SCREW AND STUD TYPES AND ASSOCIATED ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-A-29247 Base Document:1986 | AUGER, EARTH, TRUCK-MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-STD-1816 Base Document:1992 | PRESERVATION, PACKAGING & PACKING OF RUBBER & NYLON FUEL, OIL & WATER-ALCOHOL CELLS |
| MIL P 81997 : B | POUCHES, CUSHIONED, FLEXIBLE, ELECTROSTATIC FREE, RECLOSABLE, TRANSPARENT |
| MIL-S-43929 Revision B:1978 | SHIRT, UTILITY (DURABLE PRESS) |
| MIL N 37803 : 0 | NAPHAZOLINE HYDROCHLORIDE AND ANTAZOLINE PHOSPHATE OPHTHALMIC SOLUTION |
| MIL-P-37513 Revision A:1977 | POVIDONE IODINE SOLUTION, USP |
| MIL-P-37605 Base Document:0197 | PREDNISONE TABLETS, USP |
| MIL I 37345 : C | IOTHALAMATE MEGLUMINE INJECTION USP |
| MIL-S-37395 Revision A:1978 | SULFACETAMIDE SODIUM OPHTHALMIC SOLUTION, USP |
| MIL-S-36594 Base Document:1969 | SODIUM CHLORIDE SODIUM BICARBONATE MIXTURE 4.5 GM 2S |
| PPP E 540 : C NOTICE 1 | ENVELOPE, WATER RESISTANT, FOR PACKING, LISTS AND SHIPPING DOCUMENTS |
| MIL-T-81556 Revision A:1983 | TITANIUM & TITANIUM ALLOYS, EXTRUDED BARS AND SHAPES, AIRCRAFT QUALITY |
| MIL R 87978 : LATEST | REMOVER, PAINT, EPOXY AND POLYURETHANE SYSTEMS, TANK TYPE: AMBIENT TEMPERATURE, FOR AIRCRAFT WHEELS AND LANDING GEAR COMPONENTS |
| MIL-T-37353 Base Document:1976 | TEST KIT, SYPHILIS DETECTION 100 TESTS |
| MIL-A-37570 Revision A:1978 | ALCOHOL, USP |
| MIL-S-52362 Revision D:1977 | SURVEYING SET GENERAL PURPOSE FOR PLAINMETRIC CONSTRUCTION & TOPOGRAPHIC SURVEYS, PACKAGING OF |
| MIL C 26804 : B | COVER SERVICECAP AIR POLICE WHITE |
| MIL-P-44188 Revision D:1993 | PARKA, COLD WEATHER, CAMOUFLAGE |
| MIL-C-3956 Revision C:1970 | CLOCK, MESSAGE CENTER M2 |
| MIL M 62338 : A | MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-28791 Revision D:2016 | ISOLATORS AND CIRCULATORS, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| GGG-G-15 Revision C:1975 | GAGE BLOCKS AND ACCESSORIES (INCH AND METRIC) |
| MIL-I-50089 Revision A:1960 | INSTALLATION KIT, GAS PARTICULATE FILTER UNIT COMBAT VEHICLE M20 |
| MIL-B-2619 Revision A:1957 | BAG, PATIENT'S EFFECTS |
| DOD-C-24556 Base Document:1977 | CURTAIN, TRACK AND SUSPENSION SYSTEM, BERTH (SHIPBOARD USE) (METRIC) |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL-P-0037564 Revision A:1978 | PLUG, EAR, HEARING PROTECTION UNIVERSAL SIZE WITH HEADBAND |
| MIL-P-44241 Revision B:1990 | POTATOES, SWEET, GLAZED, THERMOSTABILIZED, TRAY PACK |
| GGG-C-00413 Base Document:1964 | CLAMPING TOOL, STRAP BAND, HOSE |
| RR-C-550 Revision D:1991 | CONTAINER, FLUID, FOR PAINT SPRAY EQUIPMENT |
| MIL-V-21701 Revision B:1969 | Valve, Check, Oxygen Mask, Inlet |
| MIL-H-43280 Base Document:1964 | HOLDER, LABEL |
| MIL-B-16907 Revision G:1988 | BOILER, STEAM, HIGH PRESSURE, AUXILIARY FIRE TUBE TYPE, NAVAL SHIPBOARD |
| MIL-A-46099 Revision C:1987 | ARMOR PLATE, STEEL, ROLL-BONDED, DUAL HARDNESS (0.187 INCHES TO 0.700 INCHES INCLUSIVE) |
| MIL-V-50010 Base Document:1959 | VALVE, ANTIBACK DRAFT, PROTECTIVE SHELTER, M2 |
| GG D 475 : A | DIVIDER, SPACING, EQUAL |
| MIL-G-29170 Revision B:1988 | GASKET, SYNTHETIC RUBBER, REINFORCED [FOR DRYDOCK CAISSONS] |
| MIL-T-82270 Revision B:1975 | TROUSERS, WET SUIT (CHLOROPRENE FOAM) |
| MIL V 27166 : D | VALVE, PRESSURE EQUALIZING, GASEOUS PRODUCTS |
| TT-F-325 Revision A:1965 | FILLER, ENGRAVING, STAMPED MARKING |
| GGG-N-185 Revision A:1964 | NEEDLE, CABLE LACING |
| MIL N 27444 : D | NET, CARGO TIEDOWN, PALLETS, HCU-7/E, HCU-15/C, HCU-11/C, AND HCU-16/C |
| MIL-H-51059 Revision A:1961 | HOSE, FUEL, FLAME THROWER, M8 |
| AA-T-636 Revision A:1957 | TRAY, DESK; AND SUPPORT SET, STACKING, DESK TRAY |
| L-P-516 Revision A:1967 | PLASTIC SHEET AND PLASTIC ROD, THERMOSETTING, CAST |
| MIL-I-27196 Revision C:1988 | INDICATOR, VERTICAL VELOCITY AAU-9/A, INTEGRALLY LIGHTED |
| MIL A 14399 : B | ANALYZER, SPECTRUM AN/UPM-58() |
| MIL T 25620 : C | TESTER, OXYGEN MASK, HEADSET AND MICROPHONE, TYPE MQ-1A |
| GG-H-00582 Revision A:1967 | HOLDER, PATIENT'S BED TRAY CARD |
| MIL-R-46082 Revision B:1983 | RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC |
| MIL-C-47244 Revision A:1990 | COATING, ABLATIVE RESISTANT |
| MIL-C-55639 Revision A:1973 | CHARGER, BATTERY PP-4127 ( )/U |
| GGG-C-415 Revision A:1965 | CLAW, TACK |
| MIL C 21617 : 0 | CONNECTOR, PLUG AND RECEPTACLE ELECTRICAL RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE |
| MIL-A-12636 Revision B:1969 | ANALYZER ZM-3/U |
| MIL I 27279 : B | INDICATOR, MACH NUMBER AVU-11/A, INTEGRAL LIGHTING |
| MIL-C-11347 Revision E:1977 | CASES, BATTERY AND LIGHTING ACCESSORY, FOR SURVEYING EQUIPMENT |
| MIL-B-44374 Base Document:1989 | BINDING ASSEMBLY, SNOWSHOE, SNOW AND ICE TRAVERSING EQUIPMENT (SITE) |
| MIL-C-5040 Revision H:1994 | Cord, Fibrous, Nylon |
| MIL-C-11260 Revision D:1980 | CLAMP, HANDLE, STEEL TAPE |
| MIL P 14257 : C | PRINTER, REDUCTION, STEREOPLOTTER, MULTIPLEX |
| MIL-C-10872 Revision E:1985 | CAP, FLUE, 4-INCH, CYLINDRICAL |
| MIL-D-0036180 Revision A:1978 | DIAPER, INFANT'S, COTTON, BIRDSEYE |
| MIL-G-19650 Revision B:1963 | GENERATOR SETS, STEAM TURBINE, DIRECT DRIVE 2000 KV, 450 VOLT, 60 CYCLE A.C. |
| MIL A 27434 : A | ADAPTER, CONNECTOR, COAXIAL, RADIO FREQUENCY, BETWEEN SERIES, GENERAL SPECIFICATION FOR |
| MIL-C-3955 Revision C:1975 | CANS, COMPOSITE, SPIRALLY WOUND |
| MIL-L-37310 Revision A:1976 | LEVODOPA TABLETS, USP |
| MIL-B-37478 Base Document:1976 | BACITRACIN OINTMENT, USP |
| KK-B-151 Revision H:1977 | BELT, LINEMAN'S; AND STRAP, POLE LINEMAN'S TYPE |
| MIL R 16847 : E | RING BUOY, LIFESAVING, UNICELLULAR PLASTIC |
| MIL-B-53067 Base Document:1987 | BOAT, RECONNAISSANCE/LANDING ASSAULT, INFLATABLE: 3-, 7-, 15-PERSON |
| MIL-P-37793 Base Document:1978 | PROPARACAINE HYDROCHLORIDE OPHTHALMIC SOLUTION USP |
| DOD-P-82671 Base Document:1979 | PROPYLENE GLYCOL DINITRATE |
| PPP-C-2020 Revision A:1994 | CHEMICALS, LIQUID, DRY AND PASTE, PACKAGING OF |
| MIL C 55235 : 0 | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES TPS |
| ASTM F 1182 : 2007 : R2013 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| MIL-C-5499 Revision B:1984 | CORE, AIRCRAFT, HIGH PRESSURE AIR VALVE |
| MIL-A-82821 Base Document:1989 | ALUMINUM, SPHERICAL (60-MICROMETERS) |
| MIL-P-43951 Revision A:1989 | PADLOCK AND PADLOCK SETS, KEY OPERATED, MEDIUM SECURITY, REGULAR SHACKLE |
| MIL R 007885 : C SUPP 1 | RIVETS; BLIND, STRUCTURAL, LOCKED AND FRICTION RETAINED SPINDLE, GENERAL SPECIFICATION FOR |
| GG-M-001371 Base Document:1978 | MALLET, PLUGGING, DENTAL |
| MIL-M-37448 Base Document:1977 | METER, SALINITY INDICATING, ELECTRIC |
| MIL P 0036599 : 0 | PIPET, PLASTIC, DISPOSABLE, STERILE |
| MIL-R-46710 Revision B:1984 | RECOVERY VEHICLE, FULL-TRACKED, LIGHT, ARMORED, M578, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL D 24613 : 0 | DECK COVERING MATERIALS, INTERIOR, COSMETIC POLYMERIC |
| MIL-T-21369 Revision C:1990 | TEST SET MARK 127 MOD 4 |
| MIL-P-52674 Base Document:1969 | PHOTOMAPPING SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| MIL-H-44428 Revision A:1991 | Hood, Gas Mask, Special Purpose, Toxicological Agents Protective, M3 (No S/S Document) |
| GGG-T-2761 Base Document:1991 | TONGS, MATERIAL LIFTING, PIPE |
| MIL-C-23092 Revision B:1976 | CEMENT, NATURAL RUBBER, MAGNETIC MINESWEEPING CABLE REPAIR |
| MIL-I-27202 Revision A:1980 | INDICATOR, ELECTRICAL TACHOMETER, 0-110 PERCENT RPM 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL A 25457 : B NOTICE 1 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-B-36076 Base Document:1961 | BAG, SOILED CLOTHES, SELF-CLOSING, ROPELESS |
| MIL-B-36419 Base Document:1965 | BAG, URINE COLLECTION, PLASTIC, DISPOSABLE, 50'S |
| MIL-A-43671 Base Document:1969 | ADAPTOR, REVERSIBLE, QUICK-FIT, 1-3/4 INCH |
| MIL-F-51163 Revision A:1981 | FILTER UNIT, GAS-PARTICULATE, GED OR EMD, 300 CFM, ABCA-M6A1 |
| MIL I 18369 : C | INFLATION EQUIPMENT, CARBON DIOXIDE, FOR MULTIPLACE LIFE RAFTS |
| MIL-T-85563 Base Document:1982 | Temperature Limiter Amplifier(TLA)-Trim Test Set TTK-383/E24M-30 and Cable Case CNK-320/E24M-30 |
| MIL-B-3694 Revision C:1975 | BRIDGE CAPACITANCE INDUCTANCE RESISTANCE AN/URM-90 |
| MIL-B-36882 Base Document:1972 | BAG, FOOD SAMPLE, POLYETHYLENE, DISPOSABLE |
| MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
| MIL-J-83382 Revision C:1981 | JACKET, FLYER'S, MEN'S, SUMMER FIRE RESISTANT, CWU-36/P |
| MIL-H-43577 Revision E:1989 | HAT, SUN, HOT WEATHER |
| MIL D 11586 : D | DRIVER, ARMATURE WEDGE |
| MIL-A-37108 Base Document:1974 | ANESTHESIA SET, EPIDURAL, DISPOSABLE |
| MIL-S-13171 Revision B:1959 | SWITCHBOARD, TELEPHONE, MANUAL (TELEPHONE SWITCHBOARD SB-55) (FTC) |
| MIL-F-51217 Base Document:1965 | FILTER UNIT, GAS PARTICULATE, EMD, 1200 CFM, M10A2 |
| MIL-DTL-19491 Revision J:2014 | SEMICONDUCTOR DEVICES, PACKAGING OF |
| MIL-P-43907 Revision D:1993 | PARKA AND TROUSERS, WET WEATHER |
| MIL-B-45989 Revision C:1985 | BALANCER, VEHICLE WHEEL, BUBBLE-TYPE, PORTABLE |
| MIL B 83424 : 0 | BATTERY SYSTEMS, SEALED CELL, NICKEL CADMIUM, INTEGRAL CHARGE CONTROL, AIRCRAFT, GENERAL SPECIFICATION FOR |
| O-P-1731 Base Document:1973 | PENETRATING FLUID |
| MIL-M-6269 Revision G:1982 | MITTEN SET, FLYER'S |
| MIL-C-12512 Revision A:1960 | COILS, TELEPHONE REPEATING (COILS C-161() AND C-288()) |
| MIL-S-43753 Revision C:1987 | SAFETY CLOTHING, HIGH VISIBILITY |
| MIL D 85040 : B | DRAWERS AND UNDERSHIRTS, FLYER'S, ANTI EXPOSURE, ARAMID, HIGH TEMPERATURE RESISTANT, CWU 43 P AND CWU 44 P |
| MIL-D-24542 Revision B:1988 | DIVING OUTFIT, LIGHTWEIGHT |
| GG-B-636 Revision B:1960 | BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE |
| JJ-B-191 Revision A:1967 | BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN) |
| MIL-S-12645 Revision C:1984 | SLINGS, ENDLESS, FIBER ROPE AND NYLON WEBBING |
| J-L-231 Revision C:1987 | LEADS, STORAGE-BATTERY |
| MIL-L-81293 Revision A:1992 | LIGHTWEIGHT SANDWICH CONSTRUCTED PANEL (ASROC) LAUNCHER MK 112 |
| MIL-W-81044 Revision B:1973 | WIRE, ELECTRIC, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARYLENE INSULATED, COPPER OR COPPER ALLOY |
| MIL-D-47225 Base Document:1974 | DISC, PLASTIC, POLYETHYLENE TEREPHTHALATE, PRESSURE SENSITIVE, ADHESIVE COATED |
| MIL-P-5431 Revision A:1967 | Plastic, Phenolic, Graphited Sheets, Rods, Tubes and Shapes |
| MIL-R-81574 Base Document:1968 | RESCUE HAND TOOL, PNEUMATIC |
| NNN-T-785 Revision B:1969 | TUBE CENTRIFUGE PLASTIC |
| MIL-A-81724 Base Document:1969 | ADAPTER, LAUNCHER, AIRCRAFT, ADU-299/E |
| MIL-A-27042 Revision A:1961 | ADAPTER, TEST MX-3413/GWM-4 |
| MIL-STD-1422 Revision A:1991 | MASK, CHEMICAL BIOLOGICAL |
| MIL T 25627 : C | TRANSMITTER, SYNCHRO, ANGLE OF ATTACK OR SIDESLIP |
| MIL-R-25042 Revision B:1967 | Resin, Polyester, High Temperature Resistant, Low Pressure Laminating |
| MIL-P-43116 Revision A:1964 | PIKE,WIRE AND PIKES, POLE |
| MIL-M-10670 Revision A:1952 | MONITORING SET, TELEPHONE [MONITORING EQUIPMENT] AN/PTA-1] |
| MIL-S-21944 Revision B:1967 | SWITCH, THERMOSTATIC, MARK 3 MOD O |
| PPP-B-576 Revision C:1993 | BOX, WOOD-CLEATED PANELBOARD |
| MIL-F-46220 Revision A:1962 | FUZE, PD, M525A1E1, HEAD ASSEMBLY FOR |
| MIL-A-22891 Base Document:1962 | AMPLIFIER, ERROR LIGHT, ASSEMBLY |
| MIL-C-22328 Revision A:1964 | CARTRIDGE, DELAY, MARK 31 MOD O |
| MIL-B-12128 Revision C:1965 | BRASS, SINTERED: STRUCTURAL PARTS |
| MIL-C-50269 Revision B:1987 | CELLULOSE, WOODPULP (SULFATE) FOR NON-METALLIC CARTRIDGE CASES, KRAFT |
| PPP-B-591 Revision B:1971 | BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED |
| MIL B 20269 : E | BUCKLES: INSIGNIA AND PLAIN |
| GG-X-635 Revision D:1963 | X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL |
| L-P-1041 Revision A:1973 | PLASTIC MOLDING AND EXTRUSION MATERIAL, VINYLIDENE CHLORIDE VINYL CHLORIDE COPOLYMER |
| W-C-571 Revision C:1981 | CONDUIT & FITTINGS, NONMETAL, RIGID, (ASBESTOS CEMENT OR FIRE CLAY CEMENT), (FOR ELECTRICAL PURPOSES) |
| GG-B-89 Revision B:1958 | BAND, ABRASIVE (SILICON-CARBIDE), FOR DENTAL LATHES |
| MIL-G-51145 Revision A:1967 | GLAZING COMPOUND, BAKING PAN |
| MIL-C-23673 Revision A:1971 | CARTRIDGE, IMPULSE, MARK 43 MOD O |
| MIL M 7584 : A | METER, FUEL FLOW SYNCHRO STYLE TYPE B 3A |
| MIL-F-60022 Base Document:1964 | FUZE, MINE , COMBINATION, M10A2 LOADING, ASSEMBLING AND PACKING |
| MIL-M-63041 Revision F:1993 | MANUAL TECHNICAL, CONTENT REQUIREMENTS FOR DEPOT MAINTENANCE WORK REQUIREMENTS |
| MIL-P-50769 Base Document:1973 | PRIMER, PERCUSSION, CCU-20/A & PRIMER, PERCUSSION, CCU-21/A |
| MIL I 13504 : E NOTICE 1 | IGNITER, BOMB, WP, AN-M23A1 (W/O Fuze) |
| MIL-C-50007 Revision B:1968 | CHUTE, CONTAMINATED CLOTHING, M1 |
| MIL-C-10146 Revision A:1952 | CASE, CRYSTAL HOLDER (CS-137) GENERAL SPECIFICATION FOR |
| GGG-E-950 Revision A:1988 | EXTRACTOR, STUFFING BOX AND PUMP PACKING (AND TAMPER); AND EXTRACTOR, LANTERN GLAND |
| MIL-B-22446 Base Document:1964 | BEARING, ANNULAR BALL, HIGH GRADE |
| MIL-S-271 Revision B:1962 | STEARIC ACID, TECHNICAL |
| MIL-D-18681 Base Document:1952 | DETONATOR MK 50 MOD 0 |
| MIL-D-82490 Base Document:1967 | DRIVER, GAS OPERATED MARK 8 MOD 0 |
| HH-P-00106 Revision D:1956 | PACKING MATERIAL, FLAX OR HEMP |
| MIL C 506 : C | CARBON, ACTIVATED, POWDERED |
| LLL-B-810 Revision B:1973 | BUILDING BOARD, (HARD BOARD) HARD PRESSED VEGETABLE FIBER |
| MIL-P-18612 Revision A:1975 | PRIMER MARK 101 MOD 3 |
| L-H-490 Revision B:1992 | HOLDER, CARD-LABEL, (PLASTIC) |
| MIL-S-416 Revision D:1979 | STRAINER, WELL, WATER, WIRE WOUND |
| MIL-P-24691 Base Document:1987 | PIPE AND TUBE, CARBON, ALLOY AND STAINLESS STEEL, SEAMLESS AND WELDED, GENERAL SPECIFICATION FOR |
| MIL-T-52993 Base Document:1981 | TABLE, PHOTOINTERPRETER & ANALYST, ILLUMINATED, SPLIT STAGE |
| MIL-P-46133 Revision A:1974 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLY (ARYL SULFONE ETHER) RESIN, THERMOPLASTIC |
| MIL V 60733 : A | VEGETATION CONTROL AGENT BLUE |
| DOD-C-82660 Base Document:1977 | CHROMIUM 2-ETHYL HEXOATE |
| GGG-S-0075 Revision A:1966 | SAW SET, HAND |
| MIL-C-19479 Revision B:1971 | COAT, FOOD HANDLER'S: COTTON AND POLYESTER TWILL; WHITE; WITH POCKET |
| MIL-T-16286 Revision E:1977 | TUBE, STEEL, SEAMLESS, MARINE BOILER APPLICATION |
| MIL-P-46124 Revision B:1978 | PLASTIC MOLDING AND EXTRUSION MATERIAL, IONOMER RESINS |
| MIL-C-7438 Revision G:1985 | CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
| MIL C 51427 : B | CANISTER, CHEMICAL PROJECTILE, DF, M20 |
| MIL-B-46966 Base Document:1963 | BURSTER, BOMB, M32 |
| MIL C 18164 : A | COMPOSITION D-2 |
| AA-T-00670 Base Document:1964 | TRAY, STATIONARY, METAL, FOR STEEL DESK |
| MIL-S-51078 Revision C:1984 | SODIUM HEXAMETAPHOSPHATE, TECHNICAL |
| GGG M 00100 : 0 | MARLINESPIKE (MANILA ROPE) |
| MIL S 0053085 : A | SURVEY INSTRUMENT AUTOMATED, INTEGRATED (AISI) |
| MIL-B-82549 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 83, 1000 POUND, EXPLOSIVE LOADING ASSEMBLING, AND PACKING |
| L-C-001369 Base Document:1969 | CUSHION, CARPET AND RUG, BONDED URETHANE |
| GG-P-001264 Base Document:1967 | PENPOINTS AND PENHOLDER, CROWQUILL |
| MIL-R-55223 Revision B:1970 | REGULATOR, VOLTAGE CN-514 ( ) /GRC |
| MIL-S-43736 Revision A:1973 | SLIDE FASTENER UNITS, LACED BOOTS |
| MIL-V-81356 Revision B:1992 | VALVE, FUEL SYSTEM PRESSURIZATION AND VENT |
| MIL-STD-129-1 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - AMMUNITION & EXPLOSIVES |
| MIL-DTL-25949 Revision F:1995 | ACCELEROMETER, AIRCRAFT RANGE -5 TO 10G UNITS, INTEGRALLY LIGHTED |
| MIL-L-51414 Revision A:1977 | LAUNCHER & GRENADES, SMOKE, HC, M226, COMPONENTS FOR |
| MIL-I-81971 Revision A:1988 | INK, REACTANT |
| MIL-H-52262 Revision E:1991 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, COLLAPSIBLE 4 INCH |
| MIL-S-3678 Base Document:1952 | SHAKING APPARATUS, LABORATORY [ROTATING TYPE] |
| MIL-DTL-81581-8 Revision A:2006 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| ASTM C 1447/C1447M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM C 1447/C1447M : 2004 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| AASHTO M 54M/M 54 : 2007 : R2012 | SPECIFICATION FOR WELDED DEFORMED STEEL BAR MATS FOR CONCRETE REINFORCEMENT |
| SAE AS 39901 : 2012 | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
| SAE AMS P 83310 : 2016 | PLASTIC SHEET, POLYCARBONATE, TRANSPARENT |
| AASHTO M 329M/M 329 : 2011 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM F 437 : 2015 : REDLINE | Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| SAE AS 1710 : 2014 | COUPLING, FUEL, FLEXIBLE, VARIABLE CAVITY, THREADED TYPE WITH FERRULES |
| ASTM D 2464 : 2015 : REDLINE | Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 |
| AASHTO M 329M/M 329 : 2011 : R2015 | SPECIFICATION FOR STAINLESS CLAD DEFORMED AND PLAIN ROUND STEEL BARS FOR CONCRETE REINFORCEMENT |
| AASHTO M 221M/M 221 : 2009 : R2013 | SPECIFICATION FOR STEEL WELDED WIRE REINFORCEMENT, DEFORMED, FOR CONCRETE |
| MIL-B-50378 Base Document:1970 | BARRELS, TEST, SMALL ARMS AMMUNITION GENERAL SPECIFICATION FOR |
| SAE AS 85485 : 2017 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| SAE AMS R 25988 : 2017 | RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| SAE AS 7768 : 2016 | LIGHT, DESK, AIRCRAFT |
| SAE ARP 1616 : 2017 | SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL AND OIL SYSTEMS |
| SAE AS 83519 : 2015 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
| SAE AS 39631 : 1999 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| DSCC 89112 : B | POWER DIVIDER, 4-WAY, 0 DEGREE, CONNECTORS |
| ASTM A 864/A864M : 1990 | Specification for Steel Wire, Deformed, for Prestressed Concrete Railroad Ties (Withdrawn 1997) |
| ASTM B 127 : 2005 : R2014 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| ASTM B 127 : 2005 | Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip |
| SAE AMSQQA367E:2012(S2018) | ALUMINUM ALLOY FORGINGS |
| SAE AS 22598 : 1999 | INTERPRETATION KIT, PHOTOGRAPHIC, POCKET-SIZE BS-5( ) |
| SAE AS 1472 : 2013 | HOSE ASSEMBLY, LOW PRESSURE, POTABLE WATER |
| ASTM A 48/A48M : 2003 : R2016 | Standard Specification for Gray Iron Castings |
| ASTM A 48/A48M : 2003 : R2012 | Standard Specification for Gray Iron Castings |
| SAE AMS T 6841 : 2016 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| ASTM F 3128 : 2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core |
| SAE AS 23479 : 2012 | INDICATOR, PRESSURE, 1 1/2-INCH, INTEGRALLY LIGHTED |
| SAE AS 85848 : 2017 | SLEEVING, FOR IDENTIFICATION MARKING, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| ASTM C 1447 : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| ASTM F 878 : 1995 | Specification for Polybutylene (PB) Thermoplastic Thin-Wall Drip Irrigation Tubing (Withdrawn 2000) |
| ASTM F 2881 : 2011 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM D 1527 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 (Withdrawn 2014) |
| ASTM E 786 : 1981 : R2001 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM C 1450/C1450M : 2004 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM D 3261 : 2016-11 | SPECIFICATION FOR BUTT HEAT FUSION POLYETHYLENE (PE) PLASTIC FITTINGS FOR POLYETHYLENE (PE) PLASTIC PIPE AND TUBING |
| SAE AS 5944 : 1999 | SLINGS, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM A 135/A135M : 2009 : R2014 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM F 2590 : 2006 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| ASTM F 1182 : 2007 | Standard Specification for Anodes, Sacrificial Zinc Alloy |
| ASTM C 223 : 1998 : R2014 | Standard Specification for Asbestos-Cement Siding (Withdrawn 2019) |
| ASTM D 3034 : 2016 : REDLINE | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM A 47/A47M : 1999 : R2004 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM F 810 : 2012 : R2018 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| ASTM F 1281 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe |
| ASTM B 317/B317M : 2007 : R2015 : EDT 1 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM F 2881 : 2011 : R2015 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM F 409 : 2017 : REDLINE | Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings |
| ASTM B 491/B491M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications |
| ASTM A 121 : 2013 | Standard Specification for Metallic-Coated Carbon Steel Barbed Wire |
| ASTM E 323 : 2011 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM F 2806 : 2010 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 892 : 1995 | Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001) |
| ASTM F 1312 : 1990 : R2002 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM C 725 : 1990 : R2003 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM A 511/A511M : 2016 : REDLINE | Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar |
| SAE AS 1501 : 1994 | HOSE, AIR DUCT, FLEXIBLE, NONMETALLIC, AIRCRAFT |
| ASTM F 2191/F2191M : 2013 : REDLINE | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| ASTM A 47/A47M : 1999 : R2009 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM A 1069/A1069M : 2016 : REDLINE | Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes |
| ASTM F 2762 : 2011 : EDT 1 | Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016) |
| ASTM F 2763 : 2016 : REDLINE | Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
| ASTM C 222 : 1997 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM E 785 : 1981 : R2011 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM C 659 : 1990 : R2008 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM C 296/C296M : 2000 : R2009 : EDT 1 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM A 996/A996M : 2016 : REDLINE | Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement |
| ASTM E 1556 : 2012 : REDLINE | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| ASTM D 2680 : 2001 : R2014 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM F 2969 : 2012 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe |
| ASTM A 834 : 1995 : R2001 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 794 : 2003 : R2014 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| ASTM C 725 : 1990 : R1998 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM B 163 : 2011 : R2017 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM F 2829 : 2010 | Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM A 854/A854M : 2008 : R2017 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM E 786 : 1981 : R2006 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM F 1245 : 1989 : R2006 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM B 317/B317M : 2007 : R2015 | Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor) |
| ASTM F 2658 : 2007 : R2019 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| ASTM A 834 : 1995 : R2015 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 2986 : 2012 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications |
| ASTM B 316/B316M : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods |
| ASTM C 663 : 1998 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM C 668 : 1998 : R2014 | Standard Specification for Asbestos-Cement Transmission Pipe (Withdrawn 2019) |
| MIL-S-22141 Revision B:1976 | STEEL, INVESTMENT CASTINGS ALLOY AND CARBON |
| AA-D-2757 Base Document:1990 | DOOR, VAULT, SECURITY |
| MIL-A-52963 Revision B:1986 | AIR CONDITIONER: SPLIT-PACKAGE, 208-VOLT, 3-PHASE, 400-HERTZ, AC, 18,000 BTU/HR COOLING, 30,000 BTU/HR HEATING |
| MIL-L-15596 Revision G:1988 | LOCK, COMBINATION (SAFE AND SAFE LOCKER) |
| MIL-I-37078 Base Document:1974 | INCUBATOR, BACTERIOLOGICAL, Small, 115 volt, 50/60 Hz, AC |
| MIL-B-8907 Revision A:1983 | BOLT, ALLOY STEEL, SHEAR AND TENSILE (156 KSI FSU AND 260 KSI FTU, 450 DEGREE F) EXTERNAL WRENCHING, FLANGED HEAD |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-P-23460 Revision E:1991 | PIN, QUICK-RELEASE, SELF-RETAINING POSITIVE-LOCKING |
| MIL-S-36971 Revision A:1976 | SHAKING MACHINE, LABORATORY, 115 VOLT, 60 HZ, AC |
| MIL-U-3963 Revision A:1958 | UNIVERSAL JOINT, ANTIFRICTION BEARINGS |
| MIL-C-28809 Revision B:1988 | CIRCUIT CARD ASSEMBLIES, RIGID, FLEXIBLE & RIGID FLEX |
| J-C-580 Revision B:1974 | CORD, ELECTRICAL AND WIRE, ELECTRICAL (0- TO 600- VOLT SERVICE) |
| MIL-B-1771 Revision H:1992 | BARBER KIT, WITH PLASTIC CASE |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL-T-37213 Revision A:1976 | TIMER, INTERVAL 115 VOLT 60 HZ AC |
| GG-I-488-1 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, SMALL |
| MIL-T-462 Revision E:1985 | TANK, LIQUID STORAGE, METAL, FUEL OIL, HORIZONTAL |
| HH-I-595 Revision C:1976 | INSULATION TAPE, ELECTRICAL, PRESSURE-SENSITIVE ADHESIVE, PLASTIC |
| AA-C-2859 Base Document:1994 | CABINET, SECURITY, WEAPONS STORAGE |
| MIL-DTL-29378 Revision B:2008 | BELT, MAN'S: CEREMONIAL, OFFICERS (SAM BROWNE) |
| MIL-P-46131 Revision B:1975 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED, GLASS FIBER REINFORCED |
| GG-I-488 Revision C:1957 | INCUBATOR, BACTERIOLOGICAL |
| MIL-H-12394 Revision D:1976 | HEATERS, WATER, LIQUID FUEL |
| MIL T 82073 : D NOTICE 1 | TRUCK, LUBRICATING AND FUEL SERVICING, 4 BY 2 AND 4 BY 4 |
| MIL-A-36495 Revision A:1975 | AUDIOMETER, GENERAL DIAGNOSTIC |
| W-E-00661 Revision B:1999 | ERASER, ELECTRIC |
| MIL-N-85353 Base Document:1981 | NUTS (FASTENERS) INTERNALLY THREADED, PRELOAD LOCKING 450 DEG F 800 DEG F,1200 DEG F, GENERAL SPECIFICATION FOR |
| MIL-C-10933 Revision E:1985 | CHILLED WATER UNITS, BAKERY |
| MIL-S-36885 Revision A:1978 | SHAKING MACHINE, LABORATORY, SLIDE (ROTATING TYPE), 115 VOLT, 60 HZ, AC |
| MIL-B-23170 Revision A:1978 | BOILERS, STEAM, HIGH PRESSURE WATER TUBE, PACKAGED TYPE (5,000 TO 50,000 POUNDS PER HOUR, FIRED BY COAL, OIL, GAS OR COMBINATION OIL/GAS) |
| MIL-DTL-52031 Revision E:2009 | EXTINGUISHER, FIRE, VAPORIZING-LIQUID CF[3]BR - HAND-HELD WITH BRACKET |
| MIL-A-52767 Revision D:1989 | AIR CONDITIONER: VERTICAL AND HORIZONTAL, COMPACT |
| MIL-C-4751 Revision D:1983 | CASTERS, RIGID AND SWIVEL, PRECISION HEAVY DUTY, AND SHOCK ABSORBING |
| MIL-B-8906 Revision C:1988 | BOLT, ALLOY STEEL, SHEAR AND TENSILE, (132 KSI MIN FSU AND 220 KS MIN FTU), 45 DEGREE F, SPLINE DRIVE |
| MIL-P-52327 Revision C:1990 | PUMPS, CENTRIFUGAL, ELECTRIC-MOTOR-DRIVEN, POSITIVE PRIME, PETROLEUM PRODUCTS, AIRFIELD DEFUELLING AND RECEIVING |
| MIL-A-52424 Revision B:1984 | AIR CONDITIONERS: WALL- OR BASE-MOUNTED, SELF-CONTAINED, MULTIPACKAGE, STANDARD WEIGHT, AIR-COOLED, 6,000-BTU/HR |
| GG S 001090 : A | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, SINGLE COMPRESSOR, MOBILE, 110 VOLT, 60 CYCLE, AC: (FOR EAR, NOSE AND THROAT PROCEDURES) |
| MIL-P-46120 Revision B:1983 | PLASTIC MOLDING AND EXTRUSION MATERIAL POLYSULFONE |
| J-L-2744 Base Document:1990 | LEADS, ELECTRICAL, ARC-WELDING |
| GG-S-00795 Revision B:1990 | SUCTION AND PRESSURE APPARATUS, SURGICAL, EXPLOSION-PROOF, DOUBLE COMPRESSOR, MOBILE, 115 VOLT; 60 CYCLE, AC (WITH ETHER VAPORIZER) |
| MIL-R-83459 Revision A:1978 | RIVET, TITANIUM, BIMETAL 95 KSI F SU GENERAL SPECIFICATION FOR |
| MIL-C-19179 Revision B:1963 | COUPLING ASSEMBLY, QUICK-DISCONNECT, FUEL |
| MIL-S-36908 Revision A:1976 | SHAKING MACHINE, LABORATORY, SINGLE CUP, 115 VOLT, 50-60 HZ, AC |
| DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-C-63550 Revision E:1985 | CABLE ASSEMBLIES, ELECTRICAL, FABRICATION SPECIFICATION FOR |
| MIL-B-23964 Revision D:1981 | BOLT, SELF-RETAINING, POSITIVE LOCKING |
| MIL-V-87939 Base Document:1989 | VAPOR-SUPPRESSING - FIRE EXTINGUISHING AGENT, FOAM CONCENTRATES FOR USE ON HYPERBOLIC PROPELLANTS |
| MIL-F-81177 Revision E:1984 | FASTENERS, BLIND, HIGH STRENGTH, INSTALLATION FORMED ALLOY STEEL, GENERAL SPECIFICATION FOR |
| J-C-1270 Revision B:1973 | CABLE ASSEMBLY, POWER, ELECTRICAL |
| DDD-F-416 Revision F:2005 | Flag, National, United States of America and Flag, Union Jack |
| MIL-HDBK-1587 Base Document:1996 | MATERIALS AND PROCESS REQUIREMENTS FOR AIR FORCE WEAPON SYSTEM |
| MIL-S-36963 Revision A:1976 | STIRRER-HOT PLACE, MAGNETIC, LABORATORY |
| GG-I-446 Revision E:1978 | ILLUMINATOR, X-RAY FILM |
| MIL F 19207 : D (1) SUPP 1 | FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR |
| MIL-P-46129 Revision A:1975 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE, MODIFIED |
| KKK-T-2807 Base Document:1992 | TRUCKS, LUBRICATING AND FUEL SERVICING 4 BY 2 AND 4 BY 4 |
| MIL-P-10971 Revision E:1969 | PIN, SPRING, TUBULAR (COILED AND SLOTTED) |
| MIL N 25027 : G | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| GG-B-00146 Revision B:1965 | BATH, WHIRLPOOL, CORROSION-RESISTING STEEL |
| QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEGREES C) |
| MIL-PRF-25134 Revision C:1996 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL E 52031 : D | EXTINGUISHER, FIRE, VAPORIZING LIQUID CF3BR, 2-3/4 POUND, WITH BRACKET |
| F-F-2790 Base Document:1991 | FILTER, AIR EXTENDED AREA, INITIAL INSTALLATION |
| MIL-F-22978 Revision A:1963 | FASTENER, ROTARY, QUICK-OPERATING, HIGH STRENGTH (ASG) |
| MIL-A-37192 Base Document:1975 | AUDIOMETER. AUTOMATIC |
| MIL-STD-3003 Revision B:2007 | VEHICLES, WHEELED: PREPARATION FOR SHIPMENT AND STORAGE OF |
| GG-I-488-2 Base Document:1976 | INCUBATOR, BACTERIOLOGICAL, MEDIUM |
| MIL-B-83050 Revision D:1985 | BOLT, SELF RETAINING, IMPEDANCE TYPE |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| GG-S-1554 Base Document:1973 | STAMP, TIME (ELECTRIC CORRESPONDENCE) |
| GG-I-488-3 Base Document:1976 | INCUBATOR BACTERIOLOGICAL, LARGE |
| MIL-R-8814 Revision A:1983 | RIVET, BLIND, NONSTRUCTURAL TYPE |
| DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL BULL 343 : A | DOCUMENTS APPLICABLE TO AIRCRAFT ENGINES AND PROPELLERS, USE OF |
| MIL-W-37045 Base Document:1974 | WATER BATH, ELECTRIC, SEROLOGICAL, 6 RACK, 115 VOLT, 50-60 HZ, AC |
| W-J-800 Revision F:1992 | JUNCTION BOX, EXTENSION, JUNCTION BOX, COVER, JUNCTION BOX, (STEEL, CADMIUM OR ZINC COATED) |
| MIL F 83798 : B | FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-C-24066 Revision C:1992 | CLIP, COMPONENT, NON-ELECTRICAL, GENERAL SPECIFICATION FOR |
| AA-F-363 Revision C:1990 | FILING CABINET, SECURITY, MAPS AND PLANS, GENERAL FILING AND STORAGE |
| MIL-DTL-5578 Revision D:2008 | TANKS, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| MIL-C-14370 Revision D:1977 | COMPRESSOR, RECIPROCATING, POWER-DRIVEN, OPEN-TYPE, FOR USE WITH REFRIGERANT-12 |
| FF-L-2937 Base Document:2005 | COMBINATION LOCK, MECHANICAL |
| OO W 00860 : E | WASHING MACHINE AND DRYING TUMBLERS, HOUSEHOLD LAUNDRY, POWER OPERATED AND LAUNDRY COMMERCIAL (SELF-SERVICE) |
| MIL-C-37022 Revision A:1973 | CENTRIFUGES, LABORATORY, FLOOR MODEL |
| MIL-A-21180 Revision D:1984 | ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH |
| W-F-406 Revision E:1993 | FITTINGS FOR CABLE, POWER, ELECTRICAL AND CONDUIT, METAL, FLEXIBLE |
| MIL I 38535 : B (1) | INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR |
| AA-R-200 Revision F:1987 | REFRIGERATOR, MECHANICAL, COMMERCIAL, SELF-CONTAINED, REACH-IN AND PASS-THROUGH |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE, 3000, 10,000 & 20,000 GALLON, PETROLEUM, LOW TEMPERATURE |
| MIL-B-85604 Revision A:1988 | BOLT, NICKEL ALLOY 718, TENSION, HIGH STRENGTH, (125 KSI FSU & 220 KSI FTU) HIGH TEMPERATURE, SPLINE DRIVE, GENERAL SPECIFICATION FOR |
| MIL-C-55442 Revision B:1985 | CABLE ASSEMBLIES AND CORD ASSEMBLIES, PACKAGING OF |
| MIL-T-81364 Base Document:1966 | T-BOLT, 180,000 PSI TYPE 431 STAINLESS STEEL, MANUFACTURING PROCESS REQUIREMENTS |
| AA-F-357 Revision F:1970 | FILING CABINET, STEEL, LEGAL AND LETTER SIZE, INSULATED, SECURITY |
| MIL-A-0052767 Revision E:1994 | AIR CONDITIONERS: VERTICAL AND HORIZONTAL, COMPACT |
| DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-S-6451 Revision E:1977 | SHIELD, PROTECTIVE, AIRCRAFT AND MISSILES |
| MIL C 38159 : B | CONNECTOR, ELECTRIC, RAMP POWER, 480/277 VOLTS, GENERAL SPECIFICATION FOR |
| MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
| MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
| MIL-B-29172 Revision B:1991 | BUILDING, PORTABLE, SKID MOUNTED, KNOCKDOWN |
| MIL-F-14256 Revision F:1993 | FLUX, SOLDERING, LIQUID (ROSIN BASE) |
| W-S-610 Revision E:1990 | SPLICE CONNECTORS |
| MIL-W-37090 Base Document:1974 | WATER BATH, ELECTRIC, Precision, 6 Rack, 115 Volt, 50-60 Hz, AC |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| W-F-408 Revision E:1989 | FITTING FOR CONDUIT, METAL, RIGID, (THICK-WALL AND THIN-WALL (EMT) TYPE) |
| MIL-P-46843 Revision C:1989 | PRINTED WIRING ASSEMBLIES PRODUCTION OF |
| MIL-A-83477 Revision A:1976 | AIR CONDITIONER, A/M32C-18 TRAILER MOUNTED, DIESEL ENGINE DRIVEN |
| DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-C-5501 Revision G:1989 | CAP AND PLUG, PROTECTIVE, DUST AND MOISTURE SEAL |
| MIL-A-82175 Base Document:1968 | ARMOR, BODY, FRAGMENTATION, PROTECTIVE: FOOTWEAR |
| MIL-C-85449 Base Document:1981 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHION, GENERAL SPECIFICATION FOR |
| BB-E-2879 Revision A:2001 | EXTINGUISHER, FIRE, CARBON DIOXIDE (CO[2]), PORTABLE, WITH MOUNTING BRACKET, FOR AVIATION USE |
| MIL-N-85730 Base Document:1988 | NUT, SELF-LOCKING, SPLINE DRIVE, ASSEMBLED WASHER, NICKEL ALLOY 718, 220 KSI FTU, 900 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-25027 Revision H:1997 | NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F |
| MIL-F-8975 Revision B:1982 | FASTENER, BLIND, HIGH STRENGTH, INSTALLATION FORMED CORROSION RESISTANT STEEL, HEAT RESISTANT STEEL AND TITANIUM, GENERAL SPECIFICATION FOR |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| NNN-O-001191 Base Document:1966 | OVEN LABORATORY |
| MIL-B-9946 Revision E:1987 | BIT, SCREWDRIVER, GENERAL SPECIFICATION FOR |
| MIL-C-52788 Revision B:1992 | CONTAINER, REFRIGERATED: 8 FEET X 8 FEET X 20 FEET, INSULATED |
| MIL-C-37040 Revision A:1978 | CENTRIFUGE, LABORATORY, SMALL, 115 VOLT, 600 HZ, AC |
| MIL-P-46144 Revision C:1986 | PLASTIC SHEET, POLYCARBONATE |
| MIL-DTL-45360 Revision J:2016 | CARRIERS, PERSONNEL, FULL-TRACKED, ARMORED: M113A2 AND M113A3; MORTARS, SELF-PROPELLED: M106A2 (107MM), M125A2 (81MM) AND M1064, M1064A3 (120MM); SMOKE GENERATORS: M1059, M1059A3 AND M58; PROCESSING FOR STORAGE AND SHIPMENT OF |
| AA-V-2737 Base Document:1990 | MODULAR VAULT SYSTEMS |
| MIL-B-8831 Revision B:1982 | BOLT, 180 KSI FTU AND 180 KSI FSU 450 DEG F PROTRUDING AND FLUSH HEAD, GENERAL SPECIFICATION FOR |
| MIL W 37060 : A NOTICE 1 | WATER BATH, ELECTRIC, SEROLOGICAL, 115 VOLT, 50/60 HZ, AC |
| JJ-N-180 Revision H:2015 | NETS, LAUNDRY |
| MIL-R-36557 Revision C:1984 | REGULATOR, PRESSURE, MEDICAL GAS ADMINISTRATION APPARATUS |
| J-C-30 Revision B:1989 | CABLE AND WIRE, ELECTRICAL (POWER, FIXED INSTALLATION) |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-B-36488 Base Document:1966 | BOOTH, AUDIOMETRIC EXAMINATION |
| MIL-B-7838 Revision C:1989 | BOLT, INTERNAL WRENCHING 160 KSI FTU |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-N-8984 Base Document:1972 | NUT, SELF-LOCKING, STEEL, 260 KS1 FTU 450 DEGREES F |
| MIL-N-8985 Base Document:1972 | NUT, SELF-LOCKING STEEL, 180 KS1 FTU 450 DEGREES F |
| W-P-115 Revision C:1990 | PANEL, POWER DISTRIBUTION |
| MIL-DTL-55507 Revision F:1997 | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT) PACKAGING OF |
| MIL F 8789 : D | FITTING END, ATTACHABLE HYDRAULIC, HIGH PRESSURE HOSE |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-G-81559 Revision C:1984 | Gyroscope Assemblies and Attitude and Directional Reference Instruments for Aircraft, Packaging of |
| MIL-C-37220 Base Document:1976 | CENTRIFUGE, LABORATORY 115 VOLT 50/60 HZ |
| MIL P 46169 : A | PLASTIC, SHEET MOLDING COMPOUND, POLYESTER, GLASS FIBER REINFORCED (FOR GENERAL PURPOSE APPLICATIONS) |
| AA-S-1518 Revision A:1970 | SAFE, TOOL RESISTANT, UNINSULATED, SECURITY |
| MIL-B-43866 Revision C:1986 | BREAD-SLICING MACHINE, ELECTRIC-OPERATED, MULTIPLE KNIFE |
| MIL-P-46179 Revision A:1986 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYAMIDE IMIDE |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| MIL-E-20652 Revision F:1986 | EYELETS, METALLIC, AND EYELET WASHERS, METALLIC, GENERAL SPECIFICATION FOR |
| SAE AS 6228 : 2014 | SAFETY REQUIREMENTS FOR PROCUREMENT, MAINTENANCE AND USE OF HAND-HELD POWERED TOOLS |
| AA-D-600 Revision D:2000 | DOOR, VAULT, SECURITY |
| MIL-R-5674 Revision F:1994 | RIVETS, STRUCTURAL, ALUMINIUM ALLOY, TITANIUM COLUMBIUM ALLOY GENERAL SPECIFICATION FOR |
| MIL-B-28658 Revision E:1991 | BUILDING COMPONENTS, PANELIZED, PREFABRICATED, READY-CUT, RELOCATABLE |
| GG-S-00800 Base Document:1965 | SUCTION APPARATUS, SURGICAL, AUTOMATIC, THERMOTIC, MOBILE, 110 VOLT, AC-DC |
| MIL-DTL-11996 Revision C:2015 | HANDSETS, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-P-46161 Revision A:1976 | PLASTIC MOLDING MATERIAL, POLYTEREPHTHALATE THERMOPLASTIC, GLASS FIBER REINFORCED |
| AA-V-2940 Base Document:2008 | VAULT SYSTEM, ARMORY, ASSEMBLED |
| PPP-B-1672 Revision E:2013 | BOXES, SHIPPING, REUSABLE WITH CUSHIONING |
| MIL-C-11085 Revision D:1986 | CONVEYOR, BELT; (FLAT, SKID-MOUNTED, ELECTRIC-MOTOR-DRIVEN, 24-INCH-WIDE BELT, 50-FOOT-LONG FRAME; CAPACITY, 25 POUNDS PER FOOT, 75 TONS PER HOUR) |
| MIL-P-46115 Revision B:1977 | PLASTIC MOLDING AND EXTRUSION MATERIAL, POLYPHENYLENE OXIDE |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) |
| GG-G-76 Revision E:1980 | GAGES, PRESSURE AND VACUUM, DIAL INDICATING (FOR AIR, STEAM, OIL, WATER, AMMONIA, CHLORO-FLUORO HYDROCARBON GASES, AND COMPRESSED GASES) |
| MIL-B-29171 Revision B:1991 | BUILDINGS, RELOCATABLE, INSULATED, METAL, FOLDING FRAME |
| MIL-C-55629-19 Revision D:2010 | Circuit Breakers, Magnetic, Unsealed, Trip-Free, Four Pole, Front Mounted Auxiliary Contacts (1 to 100 Amperes) |
| MIL-N-7873 Revision B:1994 | NUT, SELF-LOCKING 1,200 DEG F |
| MIL-A-36926 Revision A:1974 | ANALYZING KIT, MEAT FAT CONTENT 115 VOLT, 60 HZ |
| MIL-B-8952 Revision B:1995 | BEARING, ROLLER, ROD END, ANTIFRICTION, SELF-ALIGNING |
| MIL-S-82496 Revision A:1977 | SCREWS, MACHINE, SELF SEALING, INTEGRAL O-RING |
| DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-D-23615 Revision C:1993 | DESIGN AND EVALUATION OF CARTRIDGE ACTUATED DEVICES |
| MIL-DTL-22529 Revision D:1996 | GROMMET, EDGING |
| MIL-L-16727 Revision D:1968 | LINK, AMMUNITION, 20MM, MARK 2 (FOR 20MM MARK 12 A/C GUNS) |
| ASTM A 536 : 1984 : R2004 | Standard Specification for Ductile Iron Castings |
| MIL C 23661 : A | CARTRIDGE, IMPULSE, MARK 45 MOD O |
| MIL-PRF-32380 Base Document:2011 | BAGS - UNIT PACK BARRIER, CHEMICAL, BIOLOGICAL PROTECTIVE CLOTHING AND ACCESSORIES |
| DOD I 24683 : 1987 | INSULATION ELECTRICAL, HIGH TEMPERATURE INORGANIC PAPER |
| MIL-C-47221 Revision A:1982 | COMPOUND, MOLDING, EPOXY RESIN, SILICON DIOXIDE AND ASBESTOS FIBER FILL |
| MIL-P-46847 Revision B:1984 | PLASTIC MATERIAL, FOAMED POLYURETHANE FOR ENCAPSULATING ELECTRONIC COMPONENTS |
| MIL-DTL-32266 Base Document:2008 | Wire Rope, 1.5 Inch Diameter, Galvanized, Compacted Strand, for Aircraft Elevator |
| MIL-R-19046 Revision D:1970 | RELAY PANEL, FIRING (FOR TORPEDO MARK 37 MODS O, O)M(,1,2, AND 3) |
| TT W 535 : C NOTICE 2 | WOOD PRESERVATIVE, FLUOR CHROME ARSENATE PHENOL MIXTURE |
| SAE AS 4468 G : 2017 | HOSE ASSEMBLY, 125 PSI, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| ASTM B 791 : 1997 | Specification for Zinc-Aluminum (ZA) Alloy Foundry Die Castings (Withdrawn 1999) |
| MIL-R-85880 Base Document:1988 | ROCKET, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| MIL-H-17656 Revision E:1984 | HAT, SOUWESTER |
| MIL-P-71012 Revision A:1994 | PISTOL, SEMIAUTOMATIC, COMPACT, 9MM: M11 |
| L-P-509 Revision A:1965 | PLASTIC SHEET, ROD AND TUBE, LAMINATED, THERMOSETTING |
| MIL-P-16789 Revision D:1986 | PUMPS (INCLUDING PRIME MOVERS AND SUPPORT ITEMS); PACKAGING OF |
| MIL-E-52715 Revision C:1992 | ERECTION AND MAINTENANCE EQUIPMENT FOR CABLE REINFORCEMENT SET FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| ASTM E 786 : 1981 : R1996 : EDT 1 | Standard Specification for Dishes, Evaporating, Platinum |
| MIL A 7291 : A | ANTENNA AT-191B/AP |
| W-D-661 Revision E:1995 | DRILL, ELECTRIC, PORTABLE, (EXCLUSIVE OF HIGH FREQUENCY TYPES) AND STAND, PORTABLE ELECTRIC DRILL, VERTICAL |
| MIL-P-22046 Base Document:1959 | POWER SUPPLY MARK 20 MOD 1 |
| MIL-P-13326 Revision D:1987 | PLATE, METAL, STEEL ALLOY; HEAT TREATED, HIGH STRENGTH; FOR WELDED STRUCTURES |
| DOD-F-24610 Base Document:1982 | FIXANT, HOLD DOWN |
| MIL-W-585 Revision E:1976 | WIRE FABRIC, STEEL, WELDED |
| MIL I 7067 : B | INDICATOR, POSITION, FLAPS, 0 - 60 DEGREE MARKING, 2 INCH SIZE |
| A-A-2780 Base Document:1992 | TYPE CLEANER |
| MIL-R-82784 Base Document:1986 | ROD, PLASTIC |
| MIL-S-83318 Revision A:1991 | SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES |
| ASTM A 682/A682M : 2005 | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled, General Requirements For (Withdrawn 2009) |
| MIL-P-52979 Base Document:1980 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 60 KW, 50/60 HERTZ, AN/MJQ-12A |
| MIL-S-37758 Base Document:1978 | SUCCINYLCHOLINE CHLORIDE INJECTION, USP |
| MIL-I-23128 Revision B:1982 | INSULATION BLANKET, THERMAL, REFRACTORY FIBER, FLEXIBLE |
| TT-C-621 Revision B:1973 | CORRECTION FLUID, DUPLICATING MACHINE STENCIL |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| MIL V 7891 : E | VALVE, OXYGEN FILLER, LOW AND PRESSURE |
| MIL-U-17611 Revision G:1987 | UNDERSHIRT, EXTREME COLD WEATHER |
| MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH ADHESION |
| GG C 00225 : A | CHEST, X-RAY FILM PROTECTIVE |
| MIL-R-81876 Revision B:1988 | RECEIVER, TRANSMITTER RADIO SET AN/APX-100(V) |
| MIL-B-48570 Revision A:1979 | BAND, CENTERING FOR PROJECTILE 105 MM DISCARDING SABOT |
| MIL-I-23594 Revision C:1988 | INSULATION TAPE, ELECTRICAL, HIGH TEMPERATURE, POLYTETRAFLUOROETHYLENE, PRESSURE SENSITIVE |
| MIL-B-13831 Revision J:1985 | BOAT, RECONNAISSANCE, PNEUMATIC: 3-MAN |
| MIL-F-37706 Base Document:1978 | FILTER UNIT, CONTAMINATION ANALYSIS, GRAVIMETRIC |
| QQ-S-681 Revision F:1974 | FEDERAL SPECIFICATION STEEL CASTINGS |
| MIL-H-37383 Base Document:1976 | |
| MIL M 37469 : NOTICE 1 | MINERAL OIL, DIISOPROPYL SEBACATE, AND ISOPROPYL MYRISTATE LOTION |
| MIL C 37873 : 0 | |
| MIL-T-37767 Revision A:1978 | THIMEROSAL SOLUTION, NF |
| MIL-M-37788 Base Document:1978 | METHYL SALICYLATE, USP |
| MIL-P-37468 Base Document:1976 | |
| MIL-P-37263 Revision A:1976 | POLYVINYL ALCOHOL OPHTHALMIC SOLUTION |
| MIL-B-85464 Base Document:1981 | BOOSTER, FUSE, MARK 38 MOD 2 |
| MIL-C-2181 Revision M:1990 | COVERALLS, TOXICOLOGICAL AGENTS PROTECTIVE M 3 |
| DOD A 24582 : 0 | ANCHOR, TWO FLUKE, BALANCED FLUKE (METRIC) |
| MIL-C-24945 Base Document:1988 | COVERALLS, FLAME RESISTANT ( COTTON FRT) |
| MIL-C-26861 Revision C:1988 | CUSHIONING MATERIAL, RESILIENT TYPE, GENERAL |
| MIL-T-36308 Revision A:1975 | TEST KIT, ALKALINE PHOSPHATASE LEVEL |
| MIL-T-37740 Base Document:1978 | TERPIN HYDRATE AND CODEINE ELIXIR, NF |
| C-F-160 Revision C:1970 | FEATHERS, WATERFOWL; AND DOWN WATERFOWL |
| MIL-B-85599 Base Document:1983 | BOOSTER, FUSE, MARK 60 MOD 2 |
| MIL-I-60231 Revision B:1995 | IGNITION ELEMENT, ELECTRIC, M55 ASSEMBLY |
| ASTM A 1095 : 2015 | Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings |
| MIL-I-6447 Revision C:1974 | INDICATOR, TRUE AIRSPEED TYPE M 1A |
| MIL C 19647 : A | CORROSION REMOVING COMPOUND, PASTE (PHOSPHORIC ACID BASE) |
| MIL-C-13753 Revision A:1972 | CHARGER, MANUAL, M6 |
| MIL-C-55038 Revision A:1963 | CHARGER, RADIAC DETECTOR, PP-1578 ( )/PD |
| DOD-M-82730 Base Document:1984 | 4,4-METHLENEBIS (2,6-DI-TERT-BUTYLPHENOL) |
| MIL L 21910 : NOTICE 1 | LAUNCHER, ROCKET LAU-10/A |
| MIL-F-50049 Base Document:1959 | FILTER, GAS, 2,500 CFM, C29 |
| MIL-D-9914 Revision A:1965 | DIAMONDS, INDUSTRIAL |
| MIL-F-50533 Base Document:1970 | FIBER, ACRYLIC, FIBRILLATED |
| AA-C-295 Base Document:1955 | CHAIR, ROTARY, STEEL TUBULAR, SPECIAL PURPOSE |
| MIL-V-25023 Revision B:1967 | VALVE, FUEL DRAIN, SELF-LOCKING |
| WW-H-1053 Revision A:1987 | HOSE, METAL (FLEXIBLE, ALUMINUM ALLOY, CORROSION RESISTANT AND HEAT RESISTANT STEEL) |
| JJJ A 711 : D NOTICE 1 | ASPARAGUS, CANNED |
| MIL-G-19053 Revision C:1957 | GAGE - AIRCRAFT, CAPACITANCE, LIQUID OXYGEN CONVERTER, GENERAL SPECIFICATION FOR |
| WW-L-2887 Base Document:1998 | TUBE, PHENOLIC, POROUS RETAINER FOR USE IN INSTRUMENT BEARINGS |
| MIL-R-38522 Revision B:1972 | RADOME CW-860/GPS |
| MIL-B-52199 Revision C:1992 | BRACKET, OUTBOARD MOTOR, FOR ALUMINUM HALF PONTOON |
| MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-L-7806 Revision A:1956 | LIGHT, PANEL, PLASTIC PLATE, LIGHTING |
| MIL-P-37843 Base Document:1976 | PRAZOSIN HYDROCHLORIDE CAPSULES |
| MIL-M-87113 Revision A:1993 | MASK, OXYGEN, MBU-10/P |
| MIL V 13803 : E | VALVE, GATE, DOUBLE DISC, CAST IRON OR STEEL |
| SAE AMS R 83285 : 2011 | RUBBER, ETHYLENE-PROPYLENE, GENERAL PURPOSE |
| MIL W 8777 : C | WIRE, ELECTRICAL, SILICONE-INSULATED COPPER 600-VOLT, 200 DEGREE C |
| MIL-P-52632 Revision D:1976 | POWER PLANT, UTILITY:MUST HOSPITAL SYSTEM |
| MIL-T-11527 Revision B:1952 | TANK, 76MM GUN, M41, M41A1, M41A2 AND M41A3, PROCESSING FOR STORAGE AND SHIPMENT OF |
| P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
| MIL-F-53053 Base Document:1985 | FUEL PRODUCT, COAL OIL MIXTURE - INDUSTRIAL TYPE COMBUSTOR BOILERS |
| MIL-M-17185 Revision A:1956 | MOUNT, RESILIENT, GENERAL SPECIFICATION AND TESTS FOR (SHIPBOARD APPLICATION) |
| MIL-C-0052980 Revision C:1994 | COMPRESSORS, RECIPROCATING AND ROTARY, AIR DIESEL-ENGINE-DRIVEN, OR GASOLINE-ENGINE-DRIVEN |
| GG-T-35 Revision C:1989 | TABLE; DRAWING, TRACING, AND SCRIBING |
| MIL-M-52677 Revision A:1975 | MULTIPLEX SECTION, TOPOGRAPHIC MAPPING SET TRUCK MOUNTED, PACKAGING OF |
| MIL-P-24589 Revision A:1992 | Proportioner Systems, Balanced Pressure, Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| MIL S 44092 : B | SLACKS, WOMEN'S: CLASSIC DESIGN, POLYESTER/WOOL |
| MIL-B-44152 Revision C:1993 | BOOTS, COMBAT; MILDEW AND WATER RESISTANT, DMS |
| MIL-C-70726 Revision A:1993 | CARTRIDGE, CALIBER .50, BLANK, XM928, PERFORMANCE SPECIFICATION FOR |
| MIL-H-43555 Revision D:1988 | HOOD, EXTREME, COLD WEATHER, W/SYNTHETIC FUR RUFF, OG-107 |
| SAE AMS F 24610 : 2016 | FIXANT, HOLD DOWN |
| MIL-P-37424 Revision A:1977 | PENICILLIN G POTASSIUM FOR INJECTION, USP |
| MIL-A-49095 Revision A:1976 | AMPLIFIER, AUDIO FREQUENCY AM-6747()/V |
| MIL-S-83333 Revision A:1975 | SHIRT, MAN S, SHORT SLEEVE, POLYESTER-COTTON (DURABLE PRESS) |
| MIL-H-4607 Revision E:1987 | HEATER, ENGINE AND SHELTER, GROUND |
| MIL P 26539 : C | PROPELLANT, NITROGEN TETROXIDE |
| MIL-B-52734 Revision C:1991 | BRIDGE FLOATING RIBBON INTERIOR BAY AND RAMP BAY |
| MIL-D-82675 Base Document:1977 | DIISOCYANATE, DIMERYL, C36 ALIPHATIC, TECHNICAL (DDI) |
| MIL-T-82824 Base Document:1989 | |
| MIL-C-81945 Revision B:1989 | COATING COMPOUND, WEAPON INSULATION, INTUMESCENT |
| MIL-M-19417 Revision D:1992 | Mask Assemblies, Oxygen and Smoke, Full Face |
| MIL R 46846 : B | RUBBER, SYNTHETIC, HEAT-SHRINKABLE |
| MIL-A-28870 Revision A:1990 | ASSEMBLIES, ELECTRICAL BACKPLANE, PRINTED WIRING, GENERAL SPECIFICATION FOR |
| A-A-52408 Base Document:1993 | Preservative Coating, Rubber: for Rubber Surfaces |
| MIL-C-11029 Revision D:1987 | CITRIC ACID, TECHNICAL |
| ASTM F 1097 : 2017 : REDLINE | Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting) |
| 11/30216823 DC : 0 | BS ISO 17367 - SUPPLY CHAIN APPLICATIONS OF RFID - PRODUCT TAGGING |
| GG H 00590 : NOTICE 1 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| MIL-P-21600 Revision A:1962 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| MIL-S-4383 Revision C:1986 | SEALING COMPOUND, TOPCOAT, FUEL TANK, BUNA-N TYPE |
| MIL-C-14470 Revision A:1961 | CONVERTER SIGNAL DATA CV-395()/U |
| MIL-T-52114 Revision G:1991 | THEODOLITE, SURVEYING, DIRECTIONAL, THIRD ORDER |
| MIL-C-10382 Revision D:1983 | CORROSION PREVENTIVE, PETROLATUM, SPRAYING APPLICATION: FOR FOOD HANDLING MACHINERY AND EQUIPMENT |
| MIL-S-12100 Base Document:1952 | SHOCK MOUNT M-447. M-448, M-449 AND BRACKET FT-512 |
| MIL-B-53107 Base Document:1990 | BRIDGE, LIGHT ASSAULT 23 METER SPAN |
| MIL-DTL-32332 Base Document:2009 | Armor Plate, Steel, Wrought, Ultra-High-Hardness |
| MIL-B-25084 Base Document:1955 | BEACON, RADIO AN-APN 69 |
| MIL-M-38510 Revision J:1991 | MICROCIRCUITS, SPECIFICATION FOR |
| MIL-DTL-62533 Revision A:1995 | CARRIER, CARGO, TRACKED, 22-TON, AMMUNITION MEDIUM: M992/A1/A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-41834 Revision G:1990 | TROUSERS, MEN'S POLYESTER & COTTON |
| MIL-HDBK-244 Revision A:1990 | GUIDE TO AIRCRAFT - STORES COMPATIBILITY |
| MIL-B-40092 Revision D:1987 | BRAID, TEXTILE, CORD-EDGE, POLYESTER |
| MIL-C-85485 Revision A:1983 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| MIL-C-14200 Revision C:1978 | CONTAINERS, SHIPPING AND STORAGE: METAL, REUSABLE; FOR ENGINES, TRANSMISSIONS, DIFFERENTIALS, TRANSFERS, AND SIMILAR ASSEMBLIES (METRIC) |
| FED-STD-804 Base Document:1991 | PACKAGING OF DUCK FABRICS (COTTON; SYNTHETIC FIBER COTTON-SYNTHETIC FIBER BLENDS) |
| MIL-B-29408 Revision A:1990 | BELT, ALL WEATHER COAT, WOMEN'S |
| MIL-B-41805 Revision B:1973 | BLANKET, COMBAT CASUALTY |
| MIL-B-43739 Revision A:1987 | BOOT, SKI-MOUNTAIN |
| MIL-M-37340 Base Document:1975 | MENINGOCOCCAL POLYSACCHARIDES VACCINE, GROUP C |
| MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
| MIL-L-45779 Revision C:1984 | LOADER-TRANSPORTER, GUIDED MISSILE, XM501E2 AND XM501E3 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL C 46747 : NOTICE 1 | CARRIER, CARGO, AMPHIBIOUS, M116 AND M116E1, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL D 37712 : NOTICE 2 | DIPHTHERIA AND TETANUS TOXOIDS AND PERTUSSIS VACCINE ABSORBED, USP |
| QQ C 591 : E NOTICE 1 | COPPER SILICON, COPPER ZINC SILICON, AND COPPER NICKEL SILICON ALLOYS, ROD, WIRE, SHAPES, FORGINGS, AND FLAT PRODUCTS (FLAT WIRE, STRIP, SHEET, BAR, AND PLATE |
| MIL-D-37457 Base Document:1976 | DEXTROSE INJECTION, USP [LARGE VOLUME INJECTION FOR SINGLE DOSE INFUSION] |
| MIL-P-37769 Base Document:1978 | PROTAMINE SULFATE INJECTION USP |
| MIL-C-37341 Revision A:1976 | |
| MIL-C-37792 Revision A:1978 | CYCLOPHOSPHAMIDE FOR INJECTION USP |
| MIL-S-43770 Base Document:1972 | SNAP HOOKS GENERAL SPECIFICATION FOR |
| MIL-P-43496 Revision F:1990 | PARKA, EXTREME COLD WEATHER |
| MIL-I-46058 Revision C:1972 | Insulating Compound, Electrical (for Coating Printed Circuit Assemblies) |
| MIL-W-71125 Base Document:1992 | WOOD PRESERVATIVES: WATERBORNE OR WATER REDUCIBLE |
| MIL-T-52942 Revision C:1996 | TRUCK, FIRE FIGHTING: PUMPER, 1000 GPM; LADDER/WATER TOWER COMBINATION |
| ASTM B 236 : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| MIL G 3866 : G | GLOVE, MEN'S CLOTH COTTON KNITTED, LIGHTWEIGHT |
| MIL-N-37387 Revision A:1977 | NALOXONE HYDROCHLORIDE INJECTION USP |
| GGG-H-211 Revision D:1985 | HELMETS, WELDERS'; HANDSHIELD, WELDING; AND PLATES, WELDING |
| DOD-P-15328 Revision D:1978 | PRIMER (WASH), PRETREATMENT (FORMULA NO. 117 FOR METALS) (METRIC) |
| MIL C 47009 : B | COMPOUND, SILICONE, HEAT SINK |
| MIL-L-83795 Revision B:1994 | LAYOUT DYE, BLUE |
| MIL G 17927 : C | GASKET, ASBESTOS METALLIC COVER, RUBBER CORE |
| MIL-D-12491 Revision E:1989 | DEGREASER, SOLVENT, TANK IMMERSION TYPE |
| MIL A 28875 : 0 | AMPLIFIER, RADIO FREQUENCY AND MICROWAVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-P-85710 Base Document:1986 | PARACHUTES, PERSONNEL, EMERGENCY ESCAPE GENERAL DESIGN SPECIFICATION FOR |
| MIL-P-50002 Revision B:1981 | PHOSPHATE COATING COMPOUNDS, FOR PHOSPHATING FERROUS METALS |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| G-E-550 Revision C:1985 | ENVELOPE, PHOTOGRAPHIC NEGATIVE, PAPER |
| MIL-C-0010597 Revision F:1994 | CLEANING COMPOUND WITH CONDITIONER FOR ENGINE COOLING SYSTEMS |
| MIL-G-82932 Base Document:1994 | GAS GENERATOR, M17, REMANUFACTURED ASSEMBLY |
| MIL S 24521 : A | SODIUM NITRITE, TECHNICAL |
| MIL-S-15204 Revision D:1984 | SEALING COMPOUND, JOINT AND THREAD, HIGH TEMPERATURE |
| MIL-I-85506 Base Document:1983 | INDICATOR, INDICATED AIRSPEED, STANDBY TYPES I, II, AND III |
| MIL K 37385 : A | KETAMINE HYDROCHLORIDE INJECTION NF |
| MIL-G-25507 Revision B:1991 | Gage, Pressure, Dial Indication, Oxygen 0-2000 PSI, Type MF-2 |
| PPP-P-1136 Revision D:1986 | PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS |
| MIL F 83870 : A | FILTER ELEMENT, FLUID PRESSURE, TRANSMISSION, AIRCRAFT DISPOSABLE, 20 MICRON ABSOLUTE |
| MIL-F-29419 Base Document:1985 | FRAME, SHIPPING [SIXCON] |
| MIL-S-860 Revision B:1966 | STEEL FORGING FOR STEAM TURBINE ROTORS |
| MIL-V-10386 Revision E:1977 | SWING, CAST-IRON AND STEEL |
| PPP-C-1683 Revision A:1988 | CUSHIONING MATERIAL, EXPANDED POLYSTYRENE LOOSE FILL BULK (FOR PACKAGING APPLICATION) |
| MIL-T-87067 Revision C:1990 | TROUSER, MEN'S, (ENLISTED, WHITE) |
| MIL-R-0036837 Revision A:1972 | RACK, TEST TUBE, LABORATORY, POLYPROPYLENE |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| MIL-STD-810 Revision H:2019 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| GGG-M-125-3 Revision A:1982 | RESPIRATOR ASSEMBLIES: AIR LINE, WITH DISPOSABLE HOOD (SUPPLIED AIR) |
| GGG-M-125 Revision G:1985 | RESPIRATOR AND RESPIRATOR ASSEMBLIES: AIR LINE; NON-POWERED AIR-PURIFYING AND POWERED AIR-PURIFYING |
| MIL-C-13962 Revision B:1966 | CRUSHING, SCREENING, AND WASHING PLANTS, DIESEL-ENGINE AND ELECTRIC-MOTOR DRIVEN, 225-TONS PER HOUR |
| MIL-C-684 Revision D:1971 | CUPS, BULLET JACKET, COPPER ALLOY CLAD STEEL: FOR SMALL ARMS AMMUNITION |
| ASTM F 2658 : 2007 : R2013 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| MIL-D-11554 Revision A:1953 | DYNAMOTOR POWER SUPPLY DY-88/GRC-9 |
| MIL E 27005 : A | EXPLOSIVE KIT, PARACHUTE RELEASE MLU-5/B AND EXPLOSIVE KIT, PARACHUTE RELEASE MLU-7/B |
| TT-L-47 Revision C:1976 | LACQUER, FLUORESCENT TYPE, SYNTHETIC BASE IN PRESSURIZED CONTAINER |
| MIL-R-23461 Revision A:1987 | RESIN COMPOUND, THERMOSETTING, ROOM TEMPERATURE CURING, FOR METAL COATING |
| GG-T-671 Revision F:1981 | TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION) |
| MIL-B-13239 Revision G:1977 | BARRIER MATERIAL, WATER PROOFED, FLEXIBLE, ALL TEMPERATURE, HEAT SEALABLE |
| ASTM F 2987 : 2012 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications |
| MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
| MIL-DTL-5513 Revision D:2012 | SWIVEL JOINT, HYDRAULIC |
| MIL-A-70609 Revision A:1988 | ADAPTOR AND FUZE, ASSEMBLY: M624 PARTS FOR |
| MIL-T-21671 Base Document:1958 | TEST SET MARK 126 MOD 0 |
| MIL C 915 : F | CABLE AND CORD ELECTRICAL, FOR SHIPBOARD USE GENERAL SPECIFICATIONS FOR |
| MIL-C-14003 Revision A:1955 | CAP, BLASTING, SPECIAL |
| MIL-S-12840 Revision H:1992 | SADDLE ASSEMBLY, STEEL AND PLYWOOD, FOR 24-TON, 2-PART PNEUMATIC FLOAT, PONTOON BRIDGE |
| MIL-P-11970 Revision C:1983 | POTASSIUM PERMANGANATE, TECHNICAL (METRIC) |
| GGG-M-125-2 Revision A:1982 | RESPIRATOR ASSEMBLIES: AIR LINE, WITH HELMET (SUPPLIED AIR) |
| MIL-B-81119 Revision A:1989 | BAND, HANDLING, MISSILE AND BOOSTER |
| MIL-S-83154 Revision A:1973 | SHIRT, MAN'S, WOOL-POLYESTER, TROPICAL BLUE |
| MIL-A-6752 Revision A:1953 | AMMETER, VOLTMETERS, AND LOADMETERS; DIRECT CURRENT |
| MIL-STD-147 Revision E:2008 | PALLETIZED UNIT LOADS |
| MIL-W-22248 Revision A:1971 | Weldments, Aluminum and Aluminum Alloy |
| MIL-W-48855 Revision C:1985 | WARHEAD BODY ASSEMBLY FOR WARHEAD SECTION, GM, HE, M258 |
| MIL-T-55155 Revision C:1993 | TERMINALS, FEEDTHRU (INSULATED) AND TERMINALS, STUD (INSULATED AND NONINSULATED), GENERAL SPECIFICATION FOR |
| A-A-2785 Base Document:1992 | PENCIL, DRAFTING |
| AASHTO M 203M/M 203 : 2012 | SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR CONCRETE REINFORCEMENT |
| MIL S 4880 : G NOTICE 1 | SWEEPER, MAGNET, SELF-PROPELLED |
| MIL-A-82667 Revision A:1978 | AMMONIUM PERCHLORATE, GENERAL SPECIFICATION FOR |
| MIL-P-47215 Revision B:1992 | PRIMER, ABLATIVE RESISTANT COATING |
| MIL C 18295 : E | CHAIN AND FITTINGS FOR FLEET MOORINGS |
| AASHTO M 334M/M 334 : 2017 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN CHROMIUM ALLOYED, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| MIL-T-458 Revision A:1969 | TIN, PULVERIZED |
| MIL-T-52957 Revision A:1978 | TEST SET, POWER SUPPLY FOR POSITION & AZIMUTH DETERMINING SYSTEM, AN/USM-428 |
| MIL-S-20561 Revision A:1974 | SPRING; ESCAPEMENT, CORROSION-RESISTING |
| GGG-M-125-4 Revision C:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, CHEMICAL CARTRIDGE (FOR ORGANIC VAPORS) |
| MIL-A-3816 Revision F:1992 | ABRASIVES AND ABRASIVE PRODUCTS; PACKAGING OF |
| MIL-C-82894 Base Document:1994 | CARTRIDGE, FIRE EXTINGUISHER, CCU-126/A |
| MIL A 9117 : D | ADHESIVE, SEALING, FOR AROMATIC FUEL CELLS AND GENERAL REPAIR |
| MIL-P-37599 Base Document:1977 | PLAGUE VACCINE, USP |
| MIL-H-37423 Base Document:1976 | HYDROXYPROGESTERONE CAPROATE INJECTION USP |
| MIL-D-3716 Revision B:1987 | DESICCANTS, ACTIVATED FOR DYNAMIC DEHUMIDIFICATION |
| MIL-H-43371 Revision B:1988 | HAT, SUN, REVERSIBLE |
| MIL-P-81255 Revision A:1976 | PLASTIC MOLDING MATERIAL, ASBESTOS PHENOLIC |
| MIL-A-81270 Base Document:1965 | ADHESIVE, SYNTHETIC RUBBER |
| MIL-STD-726 Revision H:1985 | PACKAGING REQUIREMENTS CODE |
| MIL B 60309 : 0 | BOMB, INCENDIARY, PTV, 10 POUND, M741; COMPONENTS FOR |
| GGG-D-650 Revision B:1967 | DRILL, MASONRY, ROTARY DRIVEN (CORELESS) |
| ASTM A 159 : 1983 : R2011 | Standard Specification for Automotive Gray Iron Castings |
| PPP-P-291 Revision E:1976 | PAPERBOARD, WRAPPING AND CUSHIONING |
| MIL-P-48446 Base Document:1973 | PENETRATOR, CODE AND NOSE COMPONENTS FOR PROJECTILE, 105 MM, APDS-T, M392A1 |
| MIL-L-82893 Revision A:1994 | LEAD FOIL |
| HH-F-341 Revision F:1973 | FILLERS, EXPANSION JOINT: BITUMINOUS (ASPHALT AND TAR) AND NONBITUMINOUS (PREFORMED FOR CONCRETE) |
| MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
| AA-C-001402 Base Document:1986 | CABINET, PROTECTIVE STORAGE AND FILING, UNINSULATED, WITH COMBINATION PADLOCK |
| MIL D 12817 : A | DRAFTING EQUIPMENT SET, BATTALION; SET 1, PACKAGING OF |
| MIL-R-52928 Base Document:1977 | RESERVOIR SYSTEM, FABRIC, COLLAPSIBLE, 25,000 BBL, PETROLEUM, PACKAGING OF |
| AA-D-195 Revision B:1961 | DESK, FLAT TOP, STEEL, CONFERENCE TYPE |
| EE-I-116 Revision E:1972 | ICE CREAM, ICE MILK AND SHERBERT, REGULAR AND MELLORINE OR MELLORINE TYPES, ICES AND NOVELTIES |
| MIL-C-8135 Revision A:1956 | CLOTH, COATED, NYLON, BUNA N COATED, 1 SIDE |
| MIL-H-24925 Base Document:1987 | Hood, Fireman\'s Aluminized, Proximity, with Lift-up Visor (No S/S Document) |
| MIL-P-24138 Revision A:1986 | PASSIVATOR COMPOUND, NAVY BOILER |
| MIL-S-46889 Revision B:1985 | STEEL, SPRING, CHROMIUM NICKEL ALLOY |
| MIL M 63017 : A | MANUAL, TECHNICAL, REQUIREMENTS FOR MUNITION EQUIPMENT AND AMMUNITION DATA SHEETS |
| MIL-E-22911 Revision D:1970 | ELECTRONIC PANEL (FOR TORPEDO MARK 37 MOD 2) |
| SAE AS 6370 : 2014 | WIRE, ELECTRICAL, INSULATED, ANTENNA |
| MIL-C-4109 Revision F:1986 | COUPLING ASSEMBLY, LOW PRESSURE, AIR HOSE, QUICK-DISCONNECT |
| MIL-G-46898 Base Document:1974 | GASKETING, RF AND PRESSURE |
| MIL-L-82452 Revision A:1989 | LOGIC ASSEMBLY (FOR EXERCISE HEAD MK 85) |
| MIL-C-10888 Revision D:1986 | CANNON, 4.2 INCH MORTAR: M30 AND MOUNT, 4.2 INCH MORTAR: M24A1 |
| HHH-S-616 Revision C:1957 | SPINACH PLANTS, FRESH |
| MIL-P-38336 Revision A:1994 | PRIMER COATING, INORGANIC, ZINC DUST PIGMENTED, SELF-CURING, FOR STEEL SURFACES |
| QQ-S-700 Revision D:1977 | STEEL SHEET AND STRIP, MEDIUM AND HIGH CARBON |
| TT-T-306 Revision E:1993 | THINNER, SYNTHETIC RESIN, ENAMELS |
| MIL-C-17504 Revision B:1960 | COATING COMPOUND, ACRYLIC, CLEAR |
| MIL-C-12684 Revision D:1989 | CANNON, 155 MM HOWITZER: M1A1 CANNON, 155 MM HOWITZER: M1A2 |
| MIL-C-11605 Revision B:1974 | CANNON, 155 MM GUN: M46 |
| MIL T 82806 : NOTICE 1 | TAPE, SILICA CLOTH, PHENOLIC - PREIMPREGNATED |
| MIL-P-82534 Base Document:1968 | PROGRAMMER, RANGE AND AIRFRAME SEPARATION MARK 3 MOD 1 |
| MIL-T-22913 Revision C:1971 | TIMER (FOR TORPEDO MARK 37 MOD 2) |
| MIL-A-19815 Revision A:1964 | Arming Device (Unloaded and Loaded) Mark 2 Mods 1 and 3 (For Exploder Mechanism Mark 19 Series) (No S/S Document) |
| MIL-P-63297 Base Document:1978 | PRIMER, STAB, PA515 |
| MIL L 15719 : A | LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS) |
| MIL-C-44356 Base Document:1990 | COAT AND TROUSERS, CHEMICAL PROTECTIVE, AIRCREW, FLAME RESISTANT |
| MIL-STD-1587 Revision D:2017 | MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS |
| ASTM F 957 : 1991 : R2006 | Standard Specification for Gong, Sound Signaling |
| MIL-O-22776 Revision C:1973 | OVERALLS, WET WEATHER |
| MIL-P-20385 Revision E:1982 | PROTRACTORS, SEMICIRCULAR, PLASTIC, GRADUATED IN MILS, YARDS, METERS AND INCHES |
| MIL-T-21705 Revision E:1984 | TROUSERS, EXTREME COLD WEATHER, IMPERMEABLE |
| MIL-B-18670 Revision A:1976 | BOX, SMALL ARMS AMMUNITION, MARK 1 MOD 0 |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL-I-81765 Revision A:1987 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| GG T 416 : A | TIMER, INTERVAL, SPRING-DRIVEN, PHOTOGRAPHIC |
| MIL-C-81093 Revision B:1984 | CARTRIDGES, EXPLOSIVE BOLT, (FOR TORPEDOES MARK 46 ALL MODS) |
| FF-L-2740 Revision A:1997 | LOCKS, COMBINATION |
| ASTM A 159 : 1983 | SPECIFICATION FOR AUTOMOTIVE GRAY IRON CASTINGS |
| GG-C-126 Revision A:1952 | CARRIAGE, PAIL CRM (FRAME, KICK BUCKET) |
| MIL S 70745 : 0 | STRIP, AMMUNITION, METALLIC, 30MM |
| MIL-E-63399 Revision B:1981 | ELECTRONICS-MCD ASSEMBLY FOR MINE, ANTITANK: HE, M75 |
| MIL F 50449 : B | FILLER, SHEET FORM (FOR USE IN AMMUNITION CONTAINERS) |
| MIL-T-17523 Revision D:1976 | TURBINE, STEAM, AUXILIARY (AND REDUCTION GEAR) MECHANICAL DRIVE |
| MIL-P-14232 Revision E:1976 | PARTS, EQUIPMENT AND TOOLS FOR ARMY MATERIAL, PACKAGING OF |
| MIL-G-46886 Revision B:1992 | GREASE, SILICONE |
| MIL-R-60864 Base Document:1967 | RESORCINOL |
| MIL T 82163 : C | TROUSERS, MEN'S: DRESS, WHITE |
| MIL P 27415 : NOTICE 1 | PROPELLANT, PRESSURIZING AGENT, ARGON |
| ASTM B 865 : 2004 : R2010 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| MIL-STD-163 Revision C:1978 | STEEL MILL PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| RR-P-1352 Revision C:1989 | PARTITION, TOILET, COMPLETE |
| MIL T 38804 : B | TIME COMPLIANCE TECHNICAL ORDERS (TCTOS) PREPARATION OF |
| MIL-A-19736 Revision A:1960 | AIR REFUELLING SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-22578 Revision B:1964 | |
| MIL-G-1057 Revision H:1988 | GLOVES, CLOTH, COTTON, SPECIAL OG 109 |
| MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
| MIL-M-55516 Revision A:1968 | MICROPHONE, DYNAMIC M-133/U |
| MIL T 38170 : F | TANK, MOBILE STORAGE, LIQUID OXYGEN TMU 27/M |
| MIL-T-52983 Revision G:1994 | TANK, FABRIC, COLLAPSIBLE, 3,000 10,000 20,000 AND 50,000 GALLON, FUEL |
| MIL C 47113 : B | COMPOUND, HEAT SINK, SILICONE AND/OR NON-SILICONE |
| MIL-I-17563 Revision C:1992 | IMPREGNANTS FOR ALUMINUM, COPPER, IRON, MAGNESIUM AND ZINC ALLOY CASTINGS |
| DOD F 49291 : 1987 | FIBER, OPTICAL (METRIC) |
| MIL-E-82903 Base Document:1994 | EXPLOSIVE, HNS-IV AND HNS-V |
| MIL-L-13188 Revision C:1984 | LEATHER, CATTLEHIDE, CHROME TANNED, HYDRAULIC PACKING FOR RECOIL MECHANISMS |
| MIL-C-40084 Revision C:1990 | CORROSION PREVENTIVE COMPOUND, WATER EMULSIFIABLE, OIL TYPE |
| HH-I-1972-3 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH PERLITE INSULATION BOARD ON ONE SIDE AND ASPHALT/ORGANIC FELT OR ASPHALT/GLASS FIBER FELT ON THE OTHER SIDE OF THE FOAM |
| MIL-T-44372 Revision A:1991 | Trousers, Aircrew, Combat (No S/S Document) |
| UU-P-268 Revision G:1973 | PAPER, KRAFT, WRAPPING |
| MIL-B-43290 Revision J:1989 | BAG, FLYER'S HELMET |
| MIL-W-6370 Revision C:1963 | WIRE, ELECTRICAL, INSULATED, ANTENNA |
| GGG-W-00649 Base Document:1966 | WRENCH PLIER CLAMP PLIER AND PLIER, TUBING PINCH |
| A-A-52087 Revision A:1992 | GLOVE INSERTS (COLD WEATHER) |
| MIL-S-3577 Revision G:1986 | SWEATBAND, HEADWEAR [LEATHER] |
| MIL-B-44053 Revision A:1986 | Body Armor, Fragmentation Protective Vest, Ground Troops (No S/S Document) |
| SAE AS 1969 : 2013 | COUPLING ASSEMBLY, SELF-HEALING, QUICK DISCONNECT FUEL AND OIL SYSTEM COMPONENTS |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL C 7958 : A | CONTROL, PUSH PULL, FLEXIBLE AND RIGID |
| MIL-A-37377 Revision A:1976 | AMPICILLIN SODIUM, STERILE, USP |
| MIL-W-43105 Revision B:1969 | WRENCHES, SOCKET, WHEEL STUD NUT, DOUBLE END, AND HANDLES, BAR |
| DDD-S-281 Revision K:1978 | SHEET, BED, COTTON AND POLYESTER COTTON |
| MIL-T-12236 Revision A:1975 | TEST SET, ELECTRICAL POWER (TEST SET 1-199) |
| MIL-A-81918 Base Document:1976 | ADAPTER, LAUNCHER, AIRCRAFT, ADU-299A/A |
| HH-I-1972-1 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE, FACED WITH ALUMINUM FOIL ON BOTH SIDES OF THE FOAM |
| SS-S-169 Revision B:1975 | SEALER, JOINT, SEWER, MINERAL-FILLED, HOT-POUR |
| MIL R 0043003 : E | RELEASE, CARGO PARACHUTE, 5000 POUND CAPACITY |
| MIL G 14305 : *DUPLICATE RECORD* | **DUPLICATE RECORD** |
| MIL-T-37699 Base Document:1977 | THIABENDAZOLE ORAL SUSPENSION USP |
| MIL-C-37556 Base Document:1977 | CANDICIDIN OINTMENT NF |
| MIL D 12468 : C NOTICE 1 | DECONTAMINATING AGENT, STB |
| GG-V-350 Base Document:1990 | VIEWER, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC |
| MIL-A-19642 Revision B:1982 | ALIDADE, TELESCOPIC, MARINE, MARK 8 AND ADAPTER RINGS |
| GG-T-00311 Revision B:1967 | THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER) |
| MIL-R-27777 Revision B:1973 | RELAY, TELEGRAPH, PASSIVE, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-C-37526 Base Document:1976 | CODEINE PHOSPHATE AND ASPIRIN TABLETS |
| MIL-P-83668 Revision A:1976 | PLASTIC BOARD (FOR PACKAGING APPLICATIONS) |
| MIL-S-37821 Base Document:1977 | SMALLPOX VACCINE, USP FREEZE DRIED, FOR JET GUN |
| MIL-T-52964 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM OPERA STORAGE & RETRIEVAL, DISTRIBUTION DRAFTING SUPPORT, COMPILATION, SURVEY, RECTIFIER I & II MOSAICKING DRAFTING, COLLECTION, ANALYSIS, INFORMATION AND SYNTHESIS SECTIONS, SEMITRAILER MOUNTED |
| MIL-M-70466 Base Document:1993 | MACHINE GUN, 7.62mm: M60E3 |
| MIL-P-37429 Base Document:1976 | PROPIOMAZINE HYDROCHLORIDE INJECTION NF |
| MIL-M-37255 Revision A:1976 | MUMPS VIRUS VACCINE, LIVE, USP |
| MIL-G-37421 Base Document:1976 | GLOBULIN, HUMAN TETANUS IMMUNE USP |
| MIL-E-19603 Revision C:1974 | ENAMEL, BAKING, FOR ROLLER COAT APPLICATION |
| MIL T 11656 : B | TEST SET, ELECTRICAL METER TS-682()/GSM-1 |
| MIL H 13253 : D | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL-B-16755 Revision B:1964 | BOTTLE, NURSING, WIDE MOUTH |
| MIL-A-26624 Revision B:1981 | AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN |
| MIL-C-52648 Revision D:1993 | CRANE, CRAWLER MOUNTED, 40 TON AT 12 FOOT RADIUS, 2 CUBIC YARD, DIESEL-ENGINE DRIVEN |
| MIL C 12159 : A | CALIBRATOR, FREQUENCY (FREQUENCY STANDARD TS 65( ) FMQ 1) |
| TT-P-001385 Base Document:1976 | PRIMER COATING, SYNTHETIC, GRAY (FOR METAL EQUIPMENT) |
| MIL-I-24783 Base Document:1993 | ISOLATOR, RING TYPE, PRESSURE, FOR SHIPBOARD SEWAGE SERVICE |
| F-B-2835 Base Document:1995 | BOILER, STEAM, LOW PRESSURE, FIBRETUBE |
| MIL-DTL-197 Revision M:2016 | PACKAGING OF BEARINGS, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL-G-45178 Revision A:1966 | GUN, SELF PROPELLED, FULL TRACKED, TWIN 40MM, M42 AND M42A1, PREPARATION FOR STORAGE AND SHIPMENT OF |
| MIL-S-85420 Base Document:1980 | SEALING COMPOUNDS, QUICK REPAIR, LOW TEMPERATURE CURING POLYSULFIDE, FOR AIRCRAFT STRUCTURES |
| MIL-P-0010809 Revision H:1992 | PARKA, SNOW CAMOUFLAGE, WHITE |
| GG-D-635 Revision D:1984 | DRAWING BOARD AND DRAWING BOARD TRESTLES |
| O-A-445 Revision C:2003 | AMMONIA, TECHNICAL |
| MIL C 7907 : A | CLEANING COMPOUND, DECONTAMINATING [FOR SOILED AND RADIOACTIVE CONTAMINATED SURFACES] |
| KK-I-570 Revision D:1990 | INSOLE, FOOTWEAR, LEATHER, CATTLEHIDE |
| MIL-C-1161 Revision E:1988 | COLLAR, DOG, LEATHER |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| PPP-P-1133 Revision C:1983 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-M-43294 Revision C:1989 | MASK, EXTREME COLD WEATHER (OLIVE GREEN 207) |
| MIL-M-13231 Revision C:1988 | MARKING OF ELECTRONIC ITEMS |
| MIL-B-42079 Base Document:1994 | BRACE ASSEMBLY ADJUSTABLE BED |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| MIL-A-36194 Base Document:1964 | ANVIL, OPTICIAN'S, RIVETING |
| W-B-411 Revision A:1961 | BLASTING MACHINE, GALVANOMETER, BLASTING, RESISTOR ASSEMBLY |
| MIL-STD-973 Base Document:1992 | CONFIGURATION MANAGEMENT |
| MIL-C-82747 Base Document:1988 | COATING, POLYURETHANE CLEAR, SAFFLOWER OIL MODIFIED ALKYD |
| MIL-C-87936 Revision A:1985 | CLEANING COMPOUNDS, AIRCRAFT EXTERIOR SURFACES, WATER DILUTABLE |
| MIL-STD-1904 Revision B:2016 | Test Standards for Level A and Level B Packaging for Conventional Ammunition |
| MIL L 82815 : 0 | LIQUID, ANTISTATIC |
| GGG-M-125-11 Revision A:1982 | RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT (PORTABLE BACK-PACK) |
| MIL-T-52332 Revision B:1991 | TOOL, HORIZONTAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| DOD D 51485 : A | DYE, SOLVENT YELLOW 33 (METRIC) |
| MIL-A-46091 Revision B:1981 | ADHESIVE, BRAKE LINING TO METAL |
| MIL P 24441 : B | PAINT, EPOXY POLYAMIDE, GENERAL SPECIFICATION FOR |
| MIL D 24709 : 0 | DISTRIBUTED ISOLATION MATERIAL TYPE R-50-21/64 |
| GG-S-161 Revision D:1985 | SCALES, DRAFTING, AND SCALES, PLOTTING (GENERAL SPECIFICATION) |
| MIL-DTL-62220 Revision C:1996 | RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF |
| L-P-398 Revision B:1973 | PLASTIC MOLDING MATERIAL STYRENE-BUTADIENE |
| MIL-D-83029 Revision A:1968 | DRIVE ASSEMBLY, CONSTANT SPEED, GENERAL SPECIFICATION FOR |
| MIL C 82145 : B | COAT, MAN'S: SPECIAL FULL DRESS, SCARLET, U.S. MARINE BAND, MUSICIAN'S |
| MIL-I-85671 Base Document:1987 | INDICATOR, FREQUENCY CHANNEL ID-2121A/ARC, ID-2229A/ARC AND ID-2303/ARC |
| QQ-A-371 Revision F:1971 | ALUMINUM ALLOY INGOT (FOR REMELTING) |
| MIL-T-14091 Revision E:1988 | TRIPOD, SURVEYING, EXTENSION-LEG-TYPE |
| QQ-A-596 Revision E:1981 | ALUMINUM ALLOY PERMANENT AND SEMI-PERMANENT MOLD CASTINGS |
| MIL G 0043914 : E | GOGGLES, SUN, WIND AND DUST: 1974 |
| MIL-P-22241 Revision B:1973 | PLASTIC SHEET (AND FILM) POLYTETRAFLUOROETHYLENE (TFE-FLUOROCARBON RESIN) |
| MIL-B-1290 Revision C:1967 | BAG, COTTON DUCK, COAL, 1-BUSHEL |
| MIL M 8917 : A NOTICE 2 | MAGNESIUM ALLOY SHEET AND PLATE [HM 21A - TB] [ASG] |
| MIL-C-5778 Revision D:1992 | COVER, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-C-12316 Revision E:1984 | CASE, MAP AND PHOTOGRAPH, COTTON DUCK |
| MIL-T-37413 Revision A:1977 | TRETINOIN CREAM |
| MIL-B-3759 Revision E:1985 | BAG, PERSONAL EFFECTS |
| MIL T 28919 : A | TROUSERS, MENS SERVICE, SUMMER AND WINTER [OFFICERS] |
| MIL-B-43154 Revision M:1992 | BOOTS, HOT WEATHER |
| GG I 00521 : NOTICE 1 | INDICATOR, STERILIZATION |
| MIL-D-51106 Revision A:1982 | N, N'-DICYCLOHEXYLCARBODIIMIDE, TECHNICAL |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| MIL-P-55151 Revision B:1973 | POWER SUPPLY PP-1104 ( )/G |
| A-A-52316 Revision C:2010 | TESTER, CONSTRUCTION MATERIALS, MOISTURE & DENSITY (TCMMD) |
| MIL-N-37283 Revision A:1976 | NORGESTREL AND ETHINYL ESTRADIOL TABLETS USP |
| MIL V 44132 : B | VEST, CONDITIONING MICROCLIMATE; AIR |
| MIL-M-55638 Base Document:1970 | METER MODULATION ME-57 ( )/U |
| MIL B 38608 : A | BOMB, FIRE, BLU-23/B |
| MIL-I-25091 Revision B:1985 | INDICATOR, CABIN AIR PRESSURE, PRESSURIZED AIRCRAFT, 1-7/8 INCH DIAL, TYPE MA-2 |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL P 52995 : 0 | PRIMER COATING, SYNTHETIC, CORROSION INHIBITING, LACQUER RESISTING, LEAD AND CHROMATE FREE |
| MIL R 83178 : A | REGULATOR, OXYGEN, DILUTER DEMAND, AUTOMATIC PRESSURE BREATHING, GENERAL SPECIFICATION FOR |
| MIL-T-11674 Revision F:1982 | TRIPOD, SURVEYING, FOR RANGE POLE |
| MIL C 6458 : C | CHAIN ASSEMBLY, SINGLE LEG, AIRCRAFT CARGO TIE DOWN |
| MIL-T-11776 Revision E:1988 | TABLE, LITHOGRAPHIC LAYOUT, TILT TOP, 24 INCH BY 30, INCH, NOMINAL ILLUMINATED AREA |
| MIL I 82356 : NOTICE 1 | INSTRUMENTS, SIMULATED, FOR AIRCRAFT TRAINING DEVICES; GENERAL SPECIFICATION FOR |
| MIL P 16685 : D | PACKING, MATERIAL AND PACKING PREFORMED (STUFFING TUBE FOR ELECTRIC CABLE) |
| MIL-C-53004 Revision B:1989 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR, LIGHTWEIGHT, SYNTHETIC, WOODLAND, DESERT & SNOW |
| MIL-S-8967 Base Document:1968 | STEEL BAR, WIRE, FORGING STOCK, FORGINGS, MECHANICAL TUBING [431] QUALITY |
| MIL-I-9443 Revision D:1972 | INDICATOR, TEMPERATURE THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-2 |
| MIL V 7899 : C | VALVE, CHECK, AIRCRAFT FUEL SYSTEM |
| MIL-L-24518 Base Document:1975 | LAMINATE, VINYL FILM ALUMINUM, DECORATIVE |
| MIL-C-37357 Revision B:1978 | CALCIUM GLUCEPTATE INJECTION |
| L-F-1593 Base Document:1970 | FUNNELS, PLASTIC |
| MIL-T-25363 Revision D:1973 | TANK, PNEUMATIC PRESSURE, AIRCRAFT, GLASS FIBER |
| MIL-A-63471 Base Document:1981 | ALUMINUM CHLORIDE, (ANHYDROUS) (FOR USE IN AMMUNITION) |
| MIL-R-43003 Revision F:1994 | RELEASE, CARGO PARACHUTE, 5,000 POUND CAPACITY |
| MIL-R-10159 Revision E:1969 | RAWIN SET AN/GMD 1 [UNITS OF] |
| MIL-P-22968 Revision B:1984 | PAPER, RECORDING, HEAT SENSITIVE |
| MIL F 51353 : A NOTICE 1 | FUZE, HAND GRENADE, M201A1 |
| MIL-R-42043 Base Document:1987 | REGULATOR, OXYGEN |
| UU-P-00175 Base Document:1965 | PAPER, CORRECTION |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| NNN-P-1475 Revision B:1970 | PAPER FILTER ANALYTICAL |
| MIL-H-20194 Revision E:1989 | HELIOTROPE, SURVEYING, BOX TYPE, WITH CASE |
| MIL-R-43010 Revision B:1988 | REMOULDING SET, SOIL & COMPACTION |
| JJJ-V-002180 Revision A:1985 | POTATOES, SWEET, GLAZED, THERMOSTABILIZED, TRAY PACK |
| SS-C-635 Revision B:1966 | CRAYON ASSORTMENT, DRAWING, COLORED |
| GG-W-239 Revision C:1985 | WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL) |
| MIL-T-1205 Revision C:1961 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, AIR AND WATER, STANDARD |
| JJ G 001396 : NOTICE 1 | GLOVES, FLANNEL, COTTON, WORK |
| MIL-M-13130 Revision C:1972 | METER, AUDIO LEVEL TS-585(/U) |
| MIL S 51334 : 0 | SIMULATOR DETECTOR TICKETS, CHEMICAL AGENT: M5 |
| MIL-C-40129 Revision B:1970 | CLOTH, BATISTE, COTTON, POLISHING |
| MIL-F-45687 Base Document:1961 | FIRE CONTROL ELECTRONIC CALIBRATION STANDARDS, PACKAGING OF |
| MIL-F-51357 Base Document:1976 | FILTER PANEL, INFANT PROTECTOR |
| JJJ-A-20 Base Document:1958 | ACACIA, TECHNICAL (GUM ARABIC) |
| MIL-A-27195 Revision A:1989 | ACCELEROMETER, AIRCRAFT, MECHANICAL ABU-6/A |
| MIL G 26611 : D | GENERATOR, TACHOMETER GEU-7/A, MINIATURE |
| MIL-S-51371 Revision C:1987 | SERVICE KIT, PORTABLE RIOT CONTROL AGENT DISPERSER, M254 |
| MIL-T-6095 Revision B:1969 | THINNER, CELLULOSE NITRATE DOPE BLUSH RETARDING |
| AA C 0010 : B | CABINET, BEDSIDE, METAL, HOSPITAL TYPE |
| MIL C 81089 : NOTICE 1 | COORDINATE CONVERTER MARK 54 MOD O |
| MIL-A-6589 Revision A:1968 | AMPLIFIER, ELECTRONIC CONTROL, SINGLE CHANNEL, TYPE A-2 |
| MIL-B-3889 Revision B:1968 | BOX, PLASTIC, COMPARTMENTED, SMALL PARTS |
| MIL-I-15883 Revision B:1967 | INK, WRITING, PERMANENT, SEAWATER AND FUEL OIL RESISTANT |
| MIL-B-44281 Revision A:1993 | BEVERAGE BASE, POWDER, APPLE CIDER (OPERATIONAL RATION COMPONENT) |
| HHH-V-002133 Base Document:1988 | PEAS AND MUSHROOMS, THERMOSTABILIZED, TRAY PACK |
| MIL-B-3067 Revision B:1959 | BRIDGE RESISTANCE (RESISTANCE BRIDGE ZM-4) (1U (ADDENDUM (1))) |
| MIL-D-3344 Revision D:1990 | DIVING EQUIPMENT SET, TWO PERSONS 100 FOOT DEPTH, PACKAGING OF |
| MIL-B-85598 Base Document:1988 | BEARINGS, ELASTOMERIC GENERAL SPECIFICATION FOR |
| DDD-C-001630 Base Document:1973 | CARPETS AND RUGS, EXTRA HEAVY PILE WEIGHT, WOVEN, TUFTED AND CUSTOM TUFTED SPECIAL PURPOSE |
| MIL-H-21065 Revision A:1989 | HARNESS, SAFETY, SWIMMERS |
| MIL-Y-87125 Revision A:1979 | YARN, GRAPHITE, 1000/3000 FILAMENTS |
| P-D-240 Base Document:1960 | DETERGENT, SURGICAL |
| MIL-T-49124 Base Document:1977 | TEST SET, LASER RANGEFINDER, TS-3620( )/GVS-5 |
| MIL-L-51196 Base Document:1964 | LIGHT, ILLUMINATING AND ULTRAVIOLET |
| MIL-H-4495 Revision D:1985 | HOSE ASSEMBLY, RUBBER, AERIAL REFUELING |
| L-L-330 Revision B:1974 | LINER, PLASTIC, WASTE RECEPTACLE |
| EE-C-002143 Base Document:1983 | CAKE, COFFEE, APPLE, TRAY PACK |
| MIL-P-15035 Revision C:1962 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN |
| MIL-P-514 Revision D:1966 | PLATE, IDENTIFICATION, INSTRUCTION AND MARKING BLANK |
| MIL-C-22848 Revision B:1970 | CARTRIDGE, IMPULSE, MARK 37 MOD O |
| MIL-S-22760 Revision C:1991 | SUPPORT, CROWN, SERVICE CAP AND SUPPORT HOLDER |
| MIL C 83894 : 0 | CLIP, SAFETY, ARMING WIRE RETAINING |
| MIL-T-85230 Revision A:1992 | TARGET, TOW, AERIAL, TDU-34/A |
| GGG-S-60 Revision C:1978 | SAWS, BUTCHER'S; AND BLADES, BUTCHER'S HANDSAW |
| MIL-B-36580 Revision A:1978 | BOTTLE, SCREW CAP, WIDE MOUTH, ROUND, PLASTIC |
| MIL W 3662 : B | WIRE, PLATINUM ALLOY [PLATINUM RUTHENIUM, PLATINUM IRIDIUM |
| MIL-B-37965 Base Document:1986 | BURS, BONE SURGERY (CORROSION-RESISTING STEEL) |
| MIL-E-83510 Revision A:1980 | EARPHONE ELEMENT |
| MIL V 24258 : 0 | VALVE, CHECK, INHALATION AND EXHALATION, FOR UNDERWATER BREATHING APPARATUS (SCUBA) |
| MIL-R-81553 Revision B:1992 | REGULATOR, CHEST MOUNTED, OXYGEN, POSITIVE PRESSURE, CRU-79/P |
| MIL-DTL-62015 Revision G:1995 | CARRIER, CARGO, FULL-TRACKED, M548A1 AND M548A3 - PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-B-2059 Revision D:1974 | BAG, WARDROBE: FOR PATIENTS CLOTHING |
| LLL-R-626 Revision D:1984 | ROSINS: GUM, WOOD, AND TALL OIL |
| MIL-C-39004 Base Document:1964 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, GENERAL PURPOSE, FOR SUBMINIATURE WAVEGUIDE FLANGES, GENERAL SPECIFICATION FOR |
| MIL J 2829 : E | JOINT SEALING PACKING |
| MIL-B-17757 Revision E:1974 | BOXES, SHIPPING, FIBERBOARD (MODULAR SIZE) |
| MIL-B-1718 Revision H:1986 | BELT, MILITARY POLICE, 1-3/4 INCH WIDE, MANS |
| MIL-W-52875 Revision B:1983 | WATER QUALITY ANALYSIS SET: PREVENTIVE MEDICINE |
| L-P-508 Revision H:1977 | PLASTIC SHEET, LAMINATED, DECORATIVE AND NONDECORATIVE |
| GG-T-355 Revision B:1967 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM, (METEOROLOGICAL) |
| MIL-C-595 Revision E:1990 | CHEESE SPREAD, CHEDDAR (OPERATIONAL RATION COMPONENT) |
| MIL-B-10154 Revision C:1961 | Batteries, Primary, Water-Activated (Dunk Type) (No S/S Document) |
| MIL-M-52673 Base Document:1970 | MAP REVISION SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKING OF |
| MIL-DTL-39028 Revision F:2013 | CAPACITORS, PACKAGING OF |
| GG-A-616 Revision E:1978 | APPLICATOR, DISPOSABLE |
| AA-S-698 Revision B:0196 | STOOL, STRAIGHT |
| UU F 00350 : B | FILE BACKER, PAPER |
| MIL-B-36970 Revision A:1991 | BOX, BLOOD PRODUCTS SHIPPING |
| MIL-B-23958 Revision A:1967 | BRUSH, CLEANING, AIRCRAFT, METAL BRIGHTENING |
| MIL-A-36188 Revision B:1989 | APRON, DENTAL, PLASTIC |
| MIL-P-38199 Revision B:1971 | PAD, PARACHUTE HARNESS, QUICK RELEASE |
| PPP-P-1937 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP CONTEMPORARY STYLE |
| MIL-A-2402 Revision D:1978 | ADAPTER, STEREOPLOTTER PROJECTOR, TILT, WITH CONDENSER CLIP (FOR MULTIPLEX) |
| MIL-E-17764 Revision C:1982 | ELECTRODE, CUTTING, TUBULAR, STEEL, COVERED |
| GGG-T-870 Revision A:1957 | TWEEZERS, CRAFTSMAN'S |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL-A-36950 Base Document:1973 | ASPIRATOR UNIT, SUCTION-PRESSURE APPARATUS |
| MIL-B-0036076 Revision B:1967 | BAG, SOILED CLOTHES, SELF-CLOSING, ROPELESS |
| MIL-A-22397 Base Document:1960 | ADHESIVE, PHENOL AND RESORCINOL RESIN BASE (FOR MARINE SERVICE USE) |
| MIL-S-53018 Base Document:1983 | SEALER, WELD THROUGH FOR OVERLAPPING SURFACES |
| MIL-S-81039 Revision A:1968 | SWITCH HYDROSTATIC, MARK 110 MOD 0 |
| GGG-B-211 Revision B:1967 | BEVELS: SLIDING T; UNIVERSAL: AND SHIP CARPENTERS' |
| MIL C 0050072 : E | COVER, VOICEMITTER-OUTLET VALVE, C13 |
| NNN-C-1698 Revision A:1975 | COUNTER BLOOD CELLS DIFFERENTIAL |
| GGG-C-520 Revision B:1967 | CLOTH AND DISKS, ABRASIVE, OPEN MESH, WATERPROOF |
| MIL-A-52100 Revision C:1992 | ADAPTERS: FOR BRIDGE, FLOATING, ALUMINUM, HIGHWAY-TYPE, DECK-BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-C-6136 Revision A:1965 | Conduit: Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Use SAE-AS6136) |
| MIL M 26542 : D (1) SUPP 1 | MICROPHONE, DYNAMIC, GENERAL SPECIFICATION FOR |
| DDD-C-800 Revision A:1990 | CURTAIN, BEDSIDE SCREEN |
| MIL-B-48177 Base Document:1973 | BARIUM SULFATE |
| MIL-C-429 Revision D:1982 | CHLORINATED PARAFFIN, TECHNICAL |
| NNN-C-1434 Revision C:2004 | COVER GLASS MICROSCOPE SLIDE |
| GGG-W-301 Revision B:1963 | WHEEL, BUFFING AND POLISHING |
| MIL-F-51079 Revision D:1985 | FILTER MEDIUM, FIRE RESISTANT, HIGH EFFICIENCY |
| MIL F 45968 : A | FITTINGS, AUTOMOTIVE TUBE, BRASS INVERTED FLARE (WITH STEEL NUT) |
| MIL B 11545 : 0 | BOMB, INCENDIARY, INSTRUCTIONAL, M1A1; COMPONENTS FOR |
| MIL-E-199 Revision A:1962 | ETHER, DIETHYL, TECHNICAL |
| MIL-P-46067 Revision B:1977 | PLASTIC EMBEDDING COMPOUND, EPOXY RESIN SYSTEM |
| MIL B 46506 : D | BOXES, AMMUNITION PACKING, WOOD, WIREBOUND |
| MIL I 00705 : D | ICE CREAM MIXES, REGULAR AND IMITATION, DEHYDRATED |
| A-A-177 Revision C:1994 | DICTIONARY, ENGLISH, TYPE 2 (MINIMUM 150,000 ENTRIES) |
| MIL B 24617 : A | BOILER FEEDWATER AND BOILER WATER EDTA HARDNESS TEST KIT AND COMPONENTS |
| MIL-P-14591 Revision D:1976 | PLASTIC FILM, NONRIGID, TRANSPARENT |
| MIL P 50085 : B | PRE-CLEANER, AIR PURIFIER M1A1 |
| GGG-P-00475 Base Document:1964 | PLIERS, JEWELLERS |
| PPP-B-585 Revision D:1992 | BOX, WOOD, WIREBOUND |
| MIL-B-60128 Revision A:1974 | |
| MIL-B-52251 Revision C:1988 | BRACKET, SLING ATTACHMENT, FOR BEAMS AND GIRDERS OF LINE OF COMMUNICATION BRIDGES |
| DOD-P-82670 Base Document:1980 | PROPANEDIOL, 1, 2 (METRIC) |
| MIL I 51426 : B | INTERIOR CONTAINER ASSEMBLY |
| MIL-A-85481 Base Document:1981 | ARMING WIRE ASSEMBLIES |
| MIL L 15040 : F | LABEL, GARMENT (WOVEN, RAYON) |
| MIL-B-565 Revision A:1958 | |
| MIL-G-1008 Revision G:1976 | GLOVES, CLOTH, COTTON, WORK, MEN'S AND WOMEN'S |
| GG-R-1971 Base Document:1976 | RETRACTOR, RIB, HARKEN |
| MIL H 12487 : B NOTICE 1 | HEADSET ELECTRICAL (HEADSETS ELECTRICAL H-16)(/U AND HEADSETS H-65)(/U |
| MIL-T-52820 Revision A:1979 | TABLE, DRAWING, STEEL |
| MIL-D-18506 Base Document:1955 | DETONATOR MK 45 MOD 0 |
| GGG-P-61 Revision A:1966 | PARALLELS; STEEL AND CAST-IRON, PRECISION-GROUND |
| MIL-R-51199 Revision A:1984 | REFILL KIT, ANALYZING COMPONENTS, CBR AGENT SAMPLING & ANALYZING KIT, M33 |
| MIL L 3890 : A | LINE, RADIO FREQUENCY TRANSMISSION [COAXIAL AIR DIELECTRIC] |
| AA-D-001949 Base Document:1975 | DORMITORY FURNITURE: MODULAR COMPOSITE METAL AND WOOD |
| O-A-429 Revision D:1984 | ALUMINUM SULFATE, TECHNICAL |
| MIL-C-646 Revision A:1968 | CUP, CARTRIDGE CASE, STEEL (FOR SMALL ARMS AMMUNITION) |
| GG-I-00552 Base Document:1964 | |
| MIL-C-55416 Base Document:1965 | CODER BURST TRANSMISSION GROUP AN GRA 71() (UNITS OF) |
| GGG-W-643 Revision B:1963 | WRENCH, PIPE, INTERNAL-GRIPPING |
| MIL-H-43088 Revision E:1984 | HOOD, ROCKET FUEL HANDLERS: IMPERMEABLE, FULL PROTECTION |
| MIL P 26517 : A | POWER SUPPLY, TRANSFORMER-RECTIFIER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| NNN-S-636 Revision C:1975 | PLATE SPOT TEST WHITE PORCELAIN |
| MIL-F-50057 Base Document:1959 | FILTER UNIT, GAS AND PARTICULATE, EMD,, 2,500 CFM, M11 |
| GGG-H-135 Base Document:1966 | HAWK, PLASTERER'S |
| MIL-F-51465 Revision A:1987 | FUZE, FLOATING SMOKE POT, M207A1 |
| MIL-C-48141 Base Document:1973 | COMPOSITION, TUNGSTEN, DELAY |
| MIL-C-82594 Base Document:1971 | CORROSION PREVENTIVE COMPOUND AND SURFACE SEALER FOR NONFERROUS METALS |
| MIL-C-82629 Base Document:1975 | CABLE, TORPEDO CONTROL, TYPE (B), MK7 MODS 0, 1, AND 2 |
| GG-S-1616 Revision A:1987 | SCISSORS, COLLAR AND CROWN |
| NNN-T-001293 Base Document:1996 | TUBE BLOOD COLLECTING VACUUM NONSTERILE |
| GG-B-735 Revision B:1985 | BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED) |
| MIL-S-49433 Base Document:1984 | SURFACE ACOUSTIC WAVE DEVICES, GENERAL SPECIFICATION FOR |
| MIL B 22019 : C | BARRIER MATERIALS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| MIL C 28830 : C | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| FED-STD-803 Base Document:1991 | PACKAGING OF COTTON & COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| MIL-H-1679 Revision F:1992 | HOOK, TENT; WITH THIMBLE, FOR GUY LINE, ASSEMBLY TENT |
| GG-W-101 Revision B:1957 | WASHERS, BEDPAN AND URINAL |
| MIL-I-82437 Base Document:1966 | |
| MIL B 5924 : B | BATTING, INSULATION, GLASS FIBERS |
| MIL V 29389 : A | VEST, MANS, SCARLET, DRESS [GENERAL OFFICERS] |
| MIL-C-44269 Revision B:1991 | CHERRY DESSERT, TRAY PACK |
| MIL H 83511 : 0 | HEADSET-MICROPHONE AND HEADSET-ELECTRICAL (MEDIUM NOISE ATTENUATION, HEARING PROTECTIVE), GENERAL SPECIFICATIONS FOR |
| GGG-M-125-1 Revision B:1982 | RESPIRATOR ASSEMBLIES, AIR LINE, WITH FACE PIECE (SUPPLIED AIR) |
| MIL-DTL-24671 Revision C:2002 | CLOTH, LINT-FREE, FLUSHING AND CLEANING |
| MMM-A-179 Revision B:1982 | ADHESIVE PAPER LABEL |
| MIL G 87077 : A | GLOVE, FIREMENS, ALUMINIZED, PROXIMITY |
| MIL-B-51492 Revision A:1987 | BELT, SAFETY BOAT |
| MIL-A-38462 Revision B:1970 | AIR CONDITIONER A/E32C-30 |
| MIL-D-9063 Revision B:1965 | DESEALANT, INTEGRAL FUEL AND OIL TANKS |
| QQ-C-525 Revision B:1962 | COPPER ALLOY INGOTS, LEADED AND NONLEADED TIN BRONZE, RED BRASS, AND SEMI RED BRASS) |
| MIL P 28640 : 0 | POLYSULFIDE LATEX, WD-6 |
| MIL-M-49504 Base Document:1991 | MANUALS, TECHNICAL: COMBAT VEHICLE PRECOMBAT CHECKLIST |
| MIL-L-17700 Base Document:1953 | LEAD SALICYLATE |
| MIL-P-12059 Base Document:1952 | POWDER, SULFURLESS METAL |
| MIL-R-47004 Base Document:1974 | RESIN, EPOXY BASE, THIXOTROPIC |
| MIL O 27210 : F | OXYGEN, AVIATOR'S BREATHING, LIQUID AND GAS |
| GGG-F-00340 Base Document:1965 | FILE, ROTARY |
| MIL A 13259 : B | ARMOR, STEEL: SHEET, STRIP, AND FABRICATED FORMS; ROLLED, NON-MAGNETIC; FOR HELMETS AND PERSONNEL ARMOR REQUIREMENTS |
| QQ-C-585 Revision B:1974 | COPPER NICKEL ZINC ALLOY PLATE, SHEET, STRIP AND BAR (COPPER ALLOY NUMBERS 735, 745, 762, 766 AND 770 |
| DOD-Z-82674 Base Document:1977 | ZIRCONIUM CARBIDE, POWERED, TECHNICAL |
| MS35643 Revision D:2011 | GASKET: SYNTHETIC RUBBER, CAP, FUEL TANK |
| MIL-STD-1190 Base Document:1986 | MINIMUM GUIDELINES FOR LEVEL C PRESERVATION, PACKING AND MARKING |
| MIL-A-46173 Base Document:1976 | ARMOR, STEEL, PLATE, WROUGHT, (ESR) (3/16 THROUGH 3 LINES, INCLUSIVE) |
| MIL-T-23132 Revision A:1972 | TUNGSTEN DELAY COMPOSITION |
| MIL-PRF-24049 Revision C:2015 | ROPE, POLYPROPYLENE |
| Q-C-571 Revision C:1969 | COKE (COAL) |
| MIL C 20470 : A | CALCIUM RESINATE |
| MIL-A-81258 Base Document:1965 | AMPLIFIER, RESOLVER, GENERAL SPECIFICATION FOR |
| MIL P 18906 : 0 | PROPELLANT GRAIN, CYLINDRICAL, FOR ROCKET MOTORS |
| MIL-P-18901 Base Document:1955 | PLUG, PROTECTIVE AND PRESERVATIVE, PLASTIC (FOR INTERNAL THREADS) |
| MIL A 7943 : 0 | ADAPTOR, TUBE SOCKET MX-1417/U |
| MIL-D-85494 Base Document:1981 | DIOCTYL ADIPATE |
| MIL T 17188 : D | TUBE, CARBON STEEL, ELECTRIC RESISTANCE WELDED, MARINE BOILER |
| WW-U-531 Revision F:1984 | UNION, PIPE, STEEL OR MALLEABLE IRON, THREADED CONNECTION, 150 LB, 250 LB & 300 LB WSP |
| MIL-C-38972 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-9/B |
| GGG A 00450 : 1964 | ALIGNMENT TOOL, ELECTRIC EQUIPMENT |
| MIL-T-37856 Base Document:1978 | TETRACYCLINE HYDROCHLORIDE FOR INJECTION, USP |
| GG L 256 : E | LETTERING SETS AND ACCESSORIES |
| MIL-B-26220 Revision D:1974 | BATTERIES, STORAGE, AIRCRAFT, NICKEL-CADMIUM GENERAL SPECIFICATION FOR |
| MIL-B-18147 Revision C:1983 | BOATS AND CRAFT; PREPARATION FOR DELIVERY OF |
| AA-F-700 Revision B:1975 | FROZEN FOOD CABINETS, MECHANICALLY REFRIGERATED, HOUSEHOLD |
| P-P-105 Revision C:1970 | PAPER, ABRASIVE, FLINT |
| MIL-C-11133 Revision E:1992 | CRATES, SHIPPING, WOOD, OPEN, WIREBOUND |
| MIL L 3976 : D | LIGHTS, MARKER, CLEARANCE (SERVICE & BLACKOUT) |
| MIL-F-17619 Revision E:1981 | FRAME, SERVICE CAP (MAN'S) |
| GG C 00129 : A NOTICE 1 | CART, CLINICAL CHART HOLDER |
| MMM-A-121 Base Document:1966 | ADHESIVE, BONDING VULCANIZED SYNTHETIC RUBBER TO STEEL |
| GGG-F-001391 Base Document:1967 | FILER, PISTON RING |
| MIL-F-63051 Revision A:1985 | FUZE, M934 SERIES ACTUATORS FOR |
| MIL W 14586 : A NOTICE 1 | WARHEAD, 5 INCH ROCKET, SMOKE, WP, MK 39, MOD O; FILLING ASSEMBLY |
| MIL-S-11039 Revision E:1978 | SLOTTED TEMPLATE, RADIAL ARM, PHOTOGRAMMETRIC SET VALIDATED DEC 1975 |
| MIL-R-23811 Base Document:1963 | RECORDER ASSEMBLY (FOR TORPEDO EXERCISE SECTION MARK 64 MOD 2) |
| MIL T 25446 : D | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE |
| A-A-319 Revision A:1979 | PAPER WRAPPING WET WAXED |
| MIL-C-48061 Base Document:1973 | CELLULOSE NITRATE, PLASTIC SHEETS |
| MIL H 81581/8 : 0 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| MIL-DTL-7750 Revision C:2007 | HOUSING, PARACHUTE RIPCORD |
| MIL-P-46036 Revision B:1973 | PLASTIC SHEET, RODS, TUBES AND DISCS, POLYCHLOROTRIFLUOROETHYLENE |
| MIL-R-10964 Revision A:1952 | RACK, ELECTRICAL EQUIPMENT (RACK MT-452/F & RACK MT-53/F) |
| MIL-S-63280 Base Document:1978 | SOLENOID FOR MACHINE GUN, CALIBER .50, FIXED M85 |
| MIL-I-23322 Base Document:1962 | IGNITER, MARK 173 MOD 1 (INERT ASSEMBLY) |
| GG-S-604 Base Document:1960 | SPECULUM, VAGINAL |
| MIL M 22773 : C NOTICE 1 | MITTENS, EXTREME COLD WEATHER, IMPERMEABLE |
| MIL-H-9850 Revision C:1977 | HINGE, BUTT, CONTINUOUS, PIANO |
| MIL-B-37484 Base Document:1976 | BEAKER-FLASK, LABORATORY |
| GG-C-00110 Revision A:1971 | CALIPER, X-RAY TECHNIQUE |
| MMM-A-1931 Base Document:1975 | ADHESIVE EPOXY SILVER FILLED, CONDUCTIVE |
| FF-O-601 Revision F:1990 | OPENERS, CAN, HAND AND MOUNTED |
| MIL C 45918 : 0 | CLEVISES AND CONNECTORS (ROD END) |
| MIL E 24617 : A | EDTA HARDNESS TESTING REAGENTS, BOILER FEEDWATER, SHIPBOARD USE |
| MIL-P-670 Revision A:1966 | PHOSPHORUS, RED, STABILIZED |
| MIL-I-23453 Base Document:1962 | IGNITER, MARK 188 MOD O |
| O-E-780 Revision B:1992 | ETHYLENE GLYCOL MONOMETHYL ETHER, TECHNICAL |
| MIL-A-55468 Revision A:1976 | ANTENNA GROUP OE-4()/GR |
| MIL E 8971 : B | ELECTRODES, GRAPHITE, SPECTROSCOPIC GRADE |
| DD-S-720 Revision A:1960 | STOPCOCK, LABORATORY APPARATUS, TAPER-GROUND |
| MIL A 417 : G | ADAPTER, PRIMING: M1A4 |
| MIL-DTL-75 Revision K:2007 | ELECTRON TUBES, PACKAGING OF |
| GGG S 00278 : A (4) | SHEARS AND SCISSORS |
| DOD-C-63537 Revision A:1984 | CARTRIDGE, CALIBER .22 LONG RIFLE, TRACER, M861 |
| MIL-D-3134 Revision J:1988 | DECK COVERING MATERIALS |
| MIL B 23287 : 0 | BATTERY SECTION ASSEMBLY |
| MIL P 46593 : A | PROJECTILE, CALIBERS .22, .30, .50, AND 20 MM FRAGMENT-SIMULATING |
| MIL-I-5133 Revision C:1953 | INDICATOR, ATTITUDE TYPE J 8 |
| MIL-J-5251 Revision A:1952 | JACK U-82/U |
| MIL-T-3332 Revision A:1959 | THERMOMETER, CLINICAL, VETERINARY |
| MIL-C-51360 Revision B:1988 | CANISTER, SMOKE, HC, 105 MM, PROJECTILE, M1 |
| GG-H-1970 Base Document:1976 | HOLDER, SUTURE NEEDLE, CASTROVIEJO, 5-1/2 INCH |
| MIL-R-44354 Base Document:1988 | Ruff, Parka, Extended Cold Weather (No S/S Document) |
| MIL T 24552 : A | TERMINALS AND PLUGS, CASUALTY POWER SYSTEMS, RECEPTACLE TYPE, GENERAL SPECIFICATION FOR |
| MIL-P-38184 Revision C:1975 | Parka, Extreme Cold Weather Cwu-8/P (No S/S Document) |
| MIL-I-60350 Base Document:1965 | INERT FILLERS FOR USE IN AMMUNITION |
| MIL-B-43246 Revision C:1982 | BINDING ASSEMBLY, SNOWSHOE |
| MIL S 6852 : B | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT |
| MIL P 52955 : A | POSITION & AZIMUTH DETERMINING SYSTEM (PADS), AN/USQ-70(U) |
| DOD-B-24668 Base Document:1986 | BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM |
| MIL-G-22077 Revision C:1993 | GENERATOR SETS, GAS TURBINE, DIRECT AND ALTERNATING CURRENT NAVAL SHIPBOARD USE |
| MIL-W-46611 Revision B:1966 | WARHEAD SECTION, 762 MILLIMETER ROCKET, EMPTY, C4 |
| ASTM D 4317 : 2016 : REDLINE | Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives |
| MIL-B-43366 Revision C:1990 | BODY ARMOR, FRAGMENTATION PROTECTIVE, GROIN |
| TT I 531 : C NOTICE 1 | INK, DRAWING, WATERPROOF, COLORED (S/S BY A-A-2331) |
| MIL-STD-649 Revision C:1976 | ALUMINUM AND MAGNESIUM PRODUCTS PREPARATION FOR SHIPMENT AND STORAGE |
| MIL G 52888 : A | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 100 KW, 50/60 HERTZ, PU-495A/G |
| MIL-T-26017 Revision C:1972 | TEST STAND, HYDRAULIC SYSTEM COMPONENTS, TYPE MK-3A (STAND, TEST, AIRCRAFT HYDRAULIC SYSTEM, ELECTRIC MOTOR DRIVEN, TYPE MK-3A) |
| MIL-DTL-3702 Revision F:2012 | CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
| MIL-DTL-83528 Revision H:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
| MIL-S-7108 Revision A:1955 | STEEL, ALLOY (MANGANESE SILICON NICKEL) BARS AND FORGING STOCK (AIRCRAFT QUALITY) (ASG) |
| MIL-P-21929 Revision C:1991 | PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID 2 AND 4 POUNDS PER CUBIC FOOT |
| O-A-51 Revision H:1992 | ACETONE, TECHNICAL |
| MIL-R-43767 Base Document:1972 | RETAINER (BUMPER) MATERIAL, LINER, TRASH CAN |
| MIL-C-22869 Base Document:1961 | COMPUTER, HELICOPTER PERFORMANCE |
| MIL-D-51370 Revision A:1986 | DISPERSER, RIOT CONTROL AGENT, PORTABLE, 3 GALLON, M33 |
| MIL-L-21321 Base Document:1958 | LEAD, ELECTRICAL (STORAGE BATTERY) |
| MIL S 37358 : A | SEALER HOLDER, CAPILLARY TUBE |
| MIL-E-23765 Revision B:1985 | ELECTRODES AND RODS - WELDING, BARE, SOLID AND ALLOYED CORED, GENERAL SPECIFICATION FOR |
| MIL-P-40130 Revision D:1985 | PADDLE, PARACHUTE PACKING, ALUMINUM |
| MIL-L-11296 Revision B:1966 | LIGHT ASSEMBLIES, ELECTRIC MX-129 ((/PAQ & MX-1292) (/PAQ) |
| MIL-F-27531 Revision A:1972 | FOOT SACK, EXTREME COLD WEATHER SURVIVAL, TYPE SRU-12/P |
| MIL-G-635 Revision C:1970 | GOGGLES, SUN, WIND AND DUST |
| MIL-R-2778 Revision B:1965 | RUBBER SHEET, SOLID, UNVULCANIZED, HIGH GRAPHITE, GASKET USE SYMBOL 2352 |
| MIL-B-44245 Revision B:1990 | BEANS, GREEN, THERMOSTABILIZED, TRAY PACK |
| MIL-C-29145 Revision B:1984 | COAT, FIREMANS, ALUMINIZED PROXIMITY |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-C-37178 Revision A:1975 | CHLORPROPAMIDE TABLETS,USP |
| ASTM F 289 : 1996 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM A 1109 : 2018 | Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications |
| MIL C 49055 : B | CABLE, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
| ASTM F 1245 : 1989 : R2012 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| MIL-B-43965 Revision A:1982 | BAG, WET WEATHER CLOTHING: (PARKA AND TROUSERS) |
| ASTM A 525 : 1993 | Specification for General Requirements for Steel Sheet, Zinc-Coated (Galvanized) by the Hot-Dip Process (Withdrawn 1994) |
| MIL L 38671 : A | LUG, SUSPENSION, BOMB MAU-129/A, "T" TYPE |
| MIL-D-37653 Revision A:1977 | DICLOXACILLIN SODIUM FOR ORAL SUSPENSION USP |
| MIL-R-52255 Revision D:1988 | REPAIR KIT AND REPAIR KIT COMPONENTS, FOR COLLAPSIBLE FABRIC TANKS, DRUMS, AND BOATS |
| SAE AMS P 21600 : 2013 | PAINT SYSTEM, FLUORESCENT, REMOVABLE, FOR AIRCRAFT APPLICATION |
| MIL-C-23947 Base Document:1964 | COMPOUNDING OIL |
| MIL-B-37474 Base Document:1976 | BELLADONNA ALKALOIDS WITH PHENOBARBITAL ELIXIR |
| MIL F 1224 : D | FITTINGS, TUBE, BRASS OR BRONZE, 45 DEGREE FLARED |
| MIL-A-70827 Revision A:1994 | ACTUATOR, PISTON, PA535 PARTS FOR AND LOADING, ASSEMBLING, AND PACKING |
| MIL-G-24147 Base Document:1965 | GAGE, DEPTH, HYDROGRAPHIC, NON-MAGNETIC SELF-LUMINOUS DIAL |
| MIL-S-11031 Revision B:1963 | SEALING COMPOUND, ADHESIVE. CURING (POLYSULFIDE BASE) |
| MIL-B-13136 Revision B:1968 | BATTERIES DRY |
| MIL-G-46723 Revision C:1981 | GUN, SELF PROPELLED, FULL TRACKED, 175MM, M107 & HOWITZER, SELF PROPELLED, FULL TRACKED, 8 INCH, M110A1 & M110AZ, PROCESSING FOR STORAGE & SHIPMENT OF |
| MIL-B-44359 Revision A:1993 | BUNS, HAMBURGER, SHELF STABLE |
| MIL-T-21674 Base Document:1958 | TEST SET MARK 177 MOD O |
| MIL-E-463 Revision B:1962 | ETHYL ALCOHOL [FOR ORDNANCE USE] |
| MIL-A-21071 Revision B:1973 | ANTIFOGGING COMPOUND, TRANSPARENT AIRCRAFT ENCLOSURES |
| MIL-R-9208 Revision B:1968 | REPAIR MATERIAL, FOR SELF SEALING FUEL TANKS |
| MIL-C-43563 Revision A:1982 | CAP, SERVICE, ARMY BAND, BLUE |
| ASTM A 536 : 1984 : R2014 | Standard Specification for Ductile Iron Castings |
| MIL-DTL-83833 Revision C:2017 | 3000 GALLON AERIAL BULK FUEL DELIVERY SYSTEM BLADDER |
| MIL-B-17143 Revision G:1988 | BUTTON, INSIGNIA (ANCHOR, PLASTIC, BLACK) |
| MIL-A-47310 Base Document:1987 | ADHESIVE SYSTEM, ADHESIVE AND PRIMER, FOR BONDING ETHYLENE-PROPYLENE RUBBER TO METAL |
| JJ-B-178 Revision B:1957 | BELT, ROUND (DENTAL ENGINES) |
| MIL-D-52840 Base Document:1975 | DETECTOR, BATCH INTERFACE |
| MIL-A-27471 Revision C:1993 | ADAPTER, PRESSURE-REDUCER, IN-LINE CRU-43A/A |
| MIL-C-43616 Revision C:1981 | CLEANING COMPOUND, AIRCRAFT SURFACE |
| MIL-T-29402 Base Document:1982 | TEST SET TS 3354/PRC 68 |
| AASHTO M 204M/M 204 : 2014 | SPECIFICATION FOR UNCOATED STRESS-RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE |
| MIL-B-43587 Revision C:1987 | BAG, CHEMICAL PROTECTIVE CLOTHING OUTFIT |
| MIL C 82156 : C | COAT, MAN'S, SCARLET, DRUM AND BUGLE CORPS, MUSICIANS |
| GG-T-353 Revision D:1975 | THERMOMETERS, SELF- INDICATING, BIMETALLIC |
| MIL-C-85019 Base Document:1976 | COMPUTER, AIR NAVIGATION, TRUE AIRSPEED, MACH NUMBER, WIND COMPONENTS SUPERSONIC, TYPE MB-9 |
| MIL H 5593 : C | HOSE, AIRCRAFT, LOW-PRESSURE, FLEXIBLE |
| SAE AMS P 29609 : 2016 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
| MIL-C-3367 Revision C:1968 | CANISTER, SMOKE, FOR CHEMICAL SHELL (BASE EJECTION); COMPONENTS FOR |
| GG-S-1341 Revision A:1975 | WASHER-STERILIZER, SURGICAL INSTRUMENT |
| MIL-F-14614 Revision D:1979 | FRAME AND TABLE ASSEMBLY, STEREOPLOTTER, PROJECTION, MULTIPLEX, 32-INCH LENGTH WITH CHEST |
| MIL-I-23870 Base Document:1963 | INDICATOR, FUEL RATE OF FLOW, 0 TO 15 GPM |
| MIL-R-17657 Revision C:1979 | RAINCOAT, MAN'S (FOUL WEATHER) |
| MIL-I-82826 Base Document:1985 | IGNITER ASSEMBLY |
| MIL-W-18142 Revision C:1990 | WOOD PRESERVATIVE SOLUTIONS, OIL SOLUBLE, SHIP AND BOAT USE |
| MIL-D-18616 Base Document:1955 | Detonator Mark 56 Mod 0 |
| MIL-A-82801 Base Document:1989 | ALUMINUM, SPHERICAL (13-MICROMETERS) |
| MIL-S-210 Revision A:1985 | SODIUM OXALATE, TECHNICAL (METRIC) |
| GGG-A-151 Revision D:1964 | ADZ |
| MIL-C-70724 Base Document:1992 | CARTRIDGE, 5.56MM, BLANK, M200A1 PERFORMANCE SPECIFICATION FOR |
| UU-C-282 Revision D:1974 | CHIPBOARD |
| MIL P 7034 : D | PULLEY, GROOVE, ANTIFRICTION BEARING, GREASE LUBRICATED, AIRCRAFT |
| QQ-C-390 Revision B:1983 | COPPER ALLOY CASTINGS (INCLUDING CAST BAR) |
| MIL-C-9082 Revision H:1986 | CONVERTER, OXYGEN, AIRCRAFT, LIQUID TO GASEOUS, GENERAL SPECIFICATION FOR |
| MIL U 18182 : E | UNION, PIPE, FORGED STEEL, THREADED, WATER OIL GAS (2,000, 3,000 AND 6,000 LB/IN2) |
| MIL-B-29159 Revision A:1989 | BOAT SYSTEM, UTILITY, NOMINAL, 20-FOOT REINFORCED PLASTIC WITH 100-HORSEPOWER OUTBOARD ENGINE AND TRAILER |
| MIL-D-21354 Base Document:1958 | DYE, 1, 4-DIEMTHYLAMINO-ANTHRAQUINONE (FOR COLORED SMOKE MIXTURES) |
| MIL I 7077 : B | INDICATOR, TEMPERATURE ELECTRICAL RESISTANCE, MULTIFUNCTION -70 DEG TO PLUS 150 DEG. C 2 INCH SIZE |
| MIL C 51307 : B | CANISTER, 105MM, CS, XM8, COMPONENTS FOR |
| MIL-I-18672 Base Document:1965 | INITIATOR, DETONATING CORD, MARK 2 MOD 0 |
| MIL-N-51314 Base Document:1952 | NICKEL NITRATE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-T-82251 Revision E:1987 | TRUNKS, GENERAL PURPOSE |
| MIL-D-37333 Base Document:1976 | DIETHYLPROPION HYDROCHLORIDE TABLETS, MODIFIED |
| MIL-D-37370 Base Document:1976 | DEXAMETHASONE SODIUM PHOSPHATE AEROSOL |
| MIL-A-37487 Base Document:1976 | ALLOPURINAL TABLETS, USP |
| MIL-C-37417 Base Document:1976 | CHLORPHENIRAMINE MALEATE TABLETS USP |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| MIL-S-6150 Revision D:1987 | STARTER, ENGINE, ELECTRICAL, DIRECT CRANKING, AIRCRAFT 28 VOLT DC |
| GGG-K-00484 Revision D:1966 | KNIFE, POCKET, (HEAVY DUTY) |
| MIL-B-12570 Revision D:1977 | BAKERY OVEN, TRAILER MOUNTED, M-533 |
| MIL-T-62050 Revision B:1985 | TANK, COMBAT, FULL TRACKED, 105MM, GUN, M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-539 Revision A:1976 | CLOTH, SILK, CARTRIDGE BAG |
| GGG-P-643 Revision A:1968 | PULLER KIT, MECHANICAL |
| MIL-S-37539 Base Document:1977 | SULFISOXAZOLE ACETYL ORAL SUSPENSION, USP |
| DOD-D-82727 Base Document:1983 | |
| TT-P-605 Revision B:1976 | PRIMER COATING, ALL PURPOSE GRAY, ALKYD (IN PRESSURIZED DISPENSERS) |
| MIL-I-37633 Base Document:1976 | ISOSORBIDE DINITRATE TABLETS, MODIFIED |
| MIL-S-37669 Base Document:1977 | SELENIUM SULFIDE LOTION, USP |
| XX-C-2816 Revision A:2016 | COMPRESSOR, AIR, RECIPROCATING OR ROTARY, ELECTRIC MOTOR DRIVEN, STATIONARY, 10 HP AND LARGER |
| MIL-C-21049 Revision F:1990 | Coupling Assemblies, Quick Disconnect, Aircraft Liquid Oxygen Systems |
| MIL-B-44266 Revision B:1991 | BODY ARMOR, TROUSERS, EXPLOSIVE ORDNANCE DISPOSAL (EOD) SYSTEM |
| MIL-A-85652 Base Document:1984 | AMPLIFIER-MIXER AM-7157/DKT-59 |
| MIL-C-82660 Base Document:1977 | CHROMIUM 2-ETHYL HEXOATE |
| MIL-P-83927 Revision B:1981 | Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037 |
| MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| MIL-P-18811 Revision B:1990 | PROPELLANT GRAIN, MK 43, MOD 1 |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| MIL-D-22346 Revision B:1973 | DI-NORMAL-PROPYL ADIPATE (DNPA) |
| MIL-S-83427 Base Document:1974 | SURVIVAL KIT CONTAINERS, CNU-129(V)/P AND CNU-130/P |
| MIL-P-58102 Base Document:1978 | PLASTIC SHEET AND LAMINATES, FLEXIBLE FOR ENVIRONMENTAL PROTECTIVE STORAGE AND SHIPPING SYSTEMS |
| MIL R 19648 : C | RELAY, TIME DELAY, THERMAL GENERAL SPECIFICATION FOR |
| MIL S 43176 : C | SCREEN, LATRINE, FIRE, WATER, WEATHER AND MILDEW-RESISTANT TREATED, O.D. |
| DOD-M-64040 Revision A:1986 | METHYL DIPHENYLUREA |
| MIL-T-43416 Revision C:1988 | TENT, SUNSHIELD, THEODOLITE |
| DOD-T-82666 Revision A:1978 | TRIS-1-2-(2 METHYL AZIRINDYL) PHOSPHINE OXIDE |
| MIL-A-37339 Revision A:1976 | ACETYLCYSTEINE SOLUTION, NF |
| ASTM F 800 : 1989 | Specification for Corrugated Poly(Vinyl Chloride) (PVC) Tubing and Compatible Fittings (Withdrawn 1992) |
| O-L-172 Revision A:1967 | LEATHER DRESSING, VESICANT GAS RESISTANT |
| MIL A 18793 : 0 | ANTENNA AS-333/AP |
| MIL-F-24666 Base Document:1986 | FILTER ELEMENT, SHIP FUEL SYSTEM PREFILTER, NONCLEANABLE, HIGH EFFICIENCY |
| MIL-R-11764 Revision A:1960 | RESISTOR, DECADE ZM-16 ()/U |
| MIL-G-14931 Base Document:1968 | GREASE, SILICONE FOR USE WITH AMMUNITION |
| ASTM A 809 : 2008 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| MIL C 22442 : D | CABLE ASSEMBLIES, RADIO FREQUENCY (AIRCRAFT AUDIO), GENERAL SPECIFICATION FOR |
| MIL C 6864 : C | CLEANING COMPOUND, SOLVENT, OIL COOLER |
| A-A-2798 Base Document:1992 | LEAD, SYNTHETIC |
| MIL-H-11511 Revision G:1980 | HEATER, SPACE, MULTIFUEL, WITH BLOWER 60,000 BTU/HR |
| CCC-C-46 Revision D:1986 | CLOTH, CLEANING, NONWOVEN FABRIC |
| MIL-B-43648 Revision B:1990 | BAG, TOOL, ENVELOPE TYPE |
| MIL M 12863 : 0 | MOUNT, VIBRATION (VIBRATION MOUNTS MT-1177/U, MT-1178/U, MT-1179/U |
| A-A-975 Revision A:0199 | LEAD, DRAWING |
| MIL-D-14130 Revision A:1986 | B,B'-DIHYDROXYDIETHYL SULFIDE (THIODIGLYCOL), TECHNICAL |
| MIL P 53084 : 0 | PRIMER, CATHODIC ELECTRODEPOSITION, CHEMICAL AGENT RESISTANT |
| MIL-W-215 Revision D:1989 | WHITE PHOSPHORUS (WP) |
| MIL-B-1107 Revision G:1986 | BELT, INDIVIDUAL EQUIPMENT, M-1936 |
| MIL-DTL-40137 Revision F:2004 | CLEVISES, RIGGING, AIR DELIVERY TYPE: GENERAL SPECIFICATION FOR |
| MIL-S-37404 Base Document:1976 | SULFACETAMIDE SODIUM OPHTHALMIC OINTMENT USP |
| MIL-A-85648 Base Document:1983 | Amplifier, Traveling Wave Tube |
| MIL-F-43832 Revision C:1986 | FIELD PACK, COMBAT, NYLON, LARGE, LC-1 |
| MIL-PRF-12039 Revision D:1990 | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
| O-O-670 Revision C:1991 | ORTHOPHOSPHORIC (PHOSPHORIC) ACID, TECHNICAL |
| MIL-A-11210 Revision G:1981 | AIR CONDITIONERS: BASE MOUNTED, SELF-CONTAINED, MULTIPACKAGE-TYPE, AIR-COOLED, ELECTRIC-MOTOR-DRIVEN, 18,000 - BTU/HR |
| O-G-491 Revision D:1992 | GLYCEROL, TECHNICAL (HIGH GRAVITY) |
| MIL-P-82816 Base Document:1990 | PRIMER, ADHESIVE |
| SAE AS 6174 : 2014 | COUNTERFEIT MATERIEL - ASSURING ACQUISITION OF AUTHENTIC AND CONFORMING MATERIEL |
| SAE AS 1895 : 2016 | COUPLING ASSEMBLY, V-RETAINER, HIGH PRESSURE, HIGH TEMPERATURE, PNEUMATIC TUBE |
| MIL L 58085 : A | LIGHT, BEACON, ANTI COLLISION AIRCRAFT |
| MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
| MIL-S-5594 Revision B:1971 | SWITCH, TOGGLE, ELECTRICALLY HELD SEALED GENERAL SPECIFICATION FOR |
| MIL-O-82672 Revision A:1986 | |
| MIL-T-13827 Base Document:1954 | TUNGSTEN POWDER |
| MIL-C-81790 Revision A:1990 | CONNECTORS, RECEPTACLE, EXTERNAL ELECTRIC POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-H-17024 Revision F:1988 | HOOD, EXTREME COLD WEATHER, IMPERMEABLE (SHORE) |
| MIL-S-28633 Revision C:1988 | SHELTER, EQUIPMENT, MULTIPURPOSE |
| MIL-G-36683 Base Document:1970 | GAGE, FRUIT AND VEGETABLE SIZING |
| MIL-B-53102 Base Document:1990 | BERM LINER ASSEMBLIES, ARCTIC SERVICE |
| MIL A 55359 : 0 | ANTENNA AS-1304 ( ) /ARN-30 |
| NNN B 175 : C | BEAKER LABORATORY GLASS |
| DDD-B-40 Revision A:1958 | BANDAGE, CANTON FLANNEL |
| MIL L 18494 : D | LIFE RAFT, INFLATABLE, LRU-14/A |
| WW-C-633 Revision D:1980 | COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE |
| MIL P 51395 : A | POWER SUPPLY, CHEMICAL AUTOMATIC ALARM, ABCA-M10 |
| MIL-S-70547 Base Document:1986 | SPHEROIDAL PROPELLANT, M38 FOR USE IN PROPELLING CHARGES M218, M219 AND M220 FOR CARTRIDGES, 81 MM, SMOKE, M819, ILLUMINATING M853 AND PRACTICE, M879 |
| MIL-C-324 Revision C:1983 | CALCIUM SILICIDE, TECHNICAL |
| SAE MA 2060 : 2015 | FITTINGS, WELDED, HYDRAULIC, TITANIUM AND CORROSION RESISTANT STEEL, 21 000 KPA, METRIC |
| L-P-399 Revision B:1970 | PLASTIC MOLDING MATERIAL, ION MATERIAL, STYRENE ACRYLONITRILE COPOLYMERS |
| MIL-P-36318 Revision B:1977 | PSYLLIUM HYDROPHILLIC MUCILLOID WITH DEXTROSE |
| MIL-G-36677 Revision A:1972 | GLYCOPYRROLATE TABLETS NF |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| SAE ARP 5812 : 2017 | ACTUATORS, LINEAR MECHANICAL, GENERAL SPECIFICATION GUIDE |
| MIL-P-8564 Revision D:1970 | PNEUMATIC SYSTEM COMPONENTS, AERONAUTICAL, GENERAL SPECIFICATION FOR [ASG] |
| MIL-S-4473 Revision F:1982 | SHIELDING OF MAGNETRON TUBES AND MAGNETS FOR AIR SHIPMENT |
| MIL-S-52377 Revision D:1990 | SHOP EQUIPMENT, ELECTRONIC REPAIR, SEMI TRAILER MOUNTED |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| MIL-H-81735 Revision B:1992 | HELMETS, FLIGHT DECK CREWMAN'S IMPACT RESISTANT |
| MIL-R-82804 Base Document:1989 | RESIN, EPOXY, LIQUID |
| MIL-C-23933 Revision B:1971 | CARTRIDGE, IMPULSE, MARK 44 MOD O |
| MIL-M-85831 Base Document:1989 | MASK, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE, NON-OXYGEN |
| MIL-DTL-55330 Revision C:2001 | CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| SAE AS 17852 : 2012 | REDUCERS, OXYGEN PRESSURE |
| AASHTO M 322M/M 322 : 2010 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| MIL-P-10603 Revision E:1990 | PUMP AND PUMPING UNITS, CENTRIFUGAL, POWER-DRIVEN FOR WATER PACKAGING OF |
| MIL-PRF-9954 Revision D:2009 | GLASS BEADS: FOR CLEANING AND PEENING |
| MIL B 18367 : 0 | BEARINGS, ROLLER, CYLINDRICAL, RADIAL AND THRUST, SPECIAL PRECISION |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| MIL-B-29165 Revision A:1982 | BUILDINGS, PREFABRICATED, PANELIZED: WOOD, ONE-ROOM, ARCTIC CLIMATE |
| MIL-T-3618 Revision C:1969 | THERMOMETER, SELF INDICATING, BIMETALLIC |
| MIL-C-13783 Revision C:1983 | COMPOUND, WATERPROOFING (FOR SMALL ARMS AMMUNITION) |
| MIL-M-11726 Revision E:1982 | MANIFOLD, AIR LINE, ONE TO SEVEN OUTLETS |
| MIL-B-13965 Revision B:1974 | |
| MIL-DTL-81248 Revision C:2006 | DETECTOR PAD, FREE WATER |
| MIL-I-23488 Base Document:1962 | IGNITION ELEMENT, ELECTRIC, MARK 1O MOD O |
| MIL-S-37489 Base Document:1976 | SODA LIME, USP |
| MIL-C-3735 Revision E:1988 | CUFFS, KNIT, WRIST AND ANKLE AND CLOTH KNITTED |
| MIL-C-4150 Revision J:1989 | CASE, TRANSIT AND STORAGE, WATERPROOF AND WATER-VAPORPROOF |
| MIL-E-11991 Revision E:1983 | ELECTRONIC, ELECTRICAL, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPON SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-C-17223 Revision A:1959 | CLEANER, WELDING AND CUTTING TIP |
| MIL-G-25871 Revision B:1978 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| MIL-L-52366 Revision C:1984 | LOAD BANK, AC 0-33KW RESISTIVE |
| MIL I 38715 : B | INDICATOR, COMBUSTIBLE GAS AND TOXIC GAS |
| MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
| MIL-B-82564 Base Document:1968 | BISTABLE MULTIVIBRATOR ASSEMBLY LD546989 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-H-13109 Revision A:1966 | HEADSET, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-B-42017 Base Document:1986 | BUR, BONE SURGERY (TUNGSTEN CARBIDE), GENERAL REQUIREMENTS FOR |
| MIL-A-2334 Revision J:1991 | APRON, TOXICOLOGICAL AGENTS PROTECTIVE, M-2 |
| MIL-Z-11144 Revision A:1984 | ZIRCONYL NITRATE, DIHYDRATE, ANALYZED REAGENT |
| MIL-A-23442 Revision A:1965 | Ammonium Perchlorate |
| MIL-S-11677 Revision B:1957 | SHELL, HOWITZER, 105-MM, M60; WP, FS, HD, AND H FILLING ASSEMBLY |
| DOD-I-51064 Revision D:1979 | |
| MIL-D-3718 Revision C:1986 | DYE MIX, DISPERSE RED 9 - DEXTRIN (METRIC) |
| MIL-B-15894 Revision B:1966 | BRASS: DIE CASTINGS |
| MIL-B-50432 Base Document:1969 | BAG, BARRIER, NEOPRENE, FOR USE WITH 152MM CARTRIDGES |
| CCC-G-101 Revision C:1957 | GAUZE, ABSORBENT |
| MIL F 51320 : A | FUZE, BOMB, M918 |
| SAE AMS R 6130 : 2001 | RUBBER, CELLULAR, CHEMICALLY BLOWN |
| MIL-M-13786 Base Document:1954 | MOTOR, FRACTIONAL HORSEPOWER, DIRECT CURRENT AND UNIVERSAL (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). VALIDATED MAR 1965 |
| MIL-S-11173 Revision A:1976 | SODIUM BROMATE, ANALYZED REAGENT |
| MIL C 82633 : 0 | COMPOUND, POLYMERIC ELASTOMER, THERMOSETTING (FOR USE AS BOMB TAIL PAD) |
| MIL-P-265 Revision C:1981 | POLYVINYL ALCOHOL, GRANULAR (METRIC) |
| MIL C 82876 : 1993 | CATAPULT, AIRCRAFT EJECTION SEAT, CKU-5B/A ASSEMBLY |
| ASTM A 856/A856M : 2003 : R2014 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| MIL-R-24061 Revision B:1972 | RADIAC SET, AN/PDR-27 |
| MIL-G-29635 Base Document:1990 | GLOVES, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
| MIL-G-82798 Base Document:1989 | GREASE, CALCIUM |
| MIL-A-62019 Revision B:1969 | ARMORED RECONNAISSANCE/AIRBORNE ASSAULT VEHICLE: FULL-TRACKED, 152 MM, M551; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-DTL-64154 Revision B:2008 | LAMINATE: FIBERGLASS-FABRIC-REINFORCED, PHENOLIC |
| MIL-S-83129 Revision A:1972 | SPECTROMETER, FLUID ANALYSIS A/E35U-3 |
| ASTM C 508 : 2000 : R2004 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| GG-S-935 Revision A:1977 | SYRINGES, HYPODERMIC, NEEDLE LOCK, GLASS, 3 ML (CC) |
| MIL W 83420 : E | WIRE, ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL |
| MIL-C-38373 Revision B:1975 | CAP, FLUID TANK FILLER |
| MIL-C-83019 Base Document:1968 | COATING, POLYURETHANE, FOR PROTECTION OF INTEGRAL FUEL TANK SEALING COMPOUND |
| C-N-200 Revision A:1961 | NEATS FOOT OIL |
| MIL-C-52037 Revision F:1990 | COMPRESSOR UNIT, RECIPROCATING, POWER DRIVEN, AIR, 15 CFM 3,500 PSI |
| MIL I 5356 : A | INDICATOR AIRSPEED, PITOT STATIC TYPE L 7 |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MIL-C-36416 Revision C:1978 | CENTRIFUGE LABORATORY HEMATOLOGY SMALL |
| MIL-B-1083 Revision D:1987 | BALLS, BEARING, FERROUS AND NON-FERROUS (FOR USE IN BEARINGS, VALVES AND BEARING APPLICATIONS) GENERAL SPECIFICATION FOR |
| MIL-T-53055 Revision C:1991 | TANK, 3,000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL H 49092 : 0 | HEADSET MICROPHONE H-325( )/TTC |
| GGG-P-00474 Base Document:1967 | PLIERS: HOG RING STAPLE (UPHOLSTERER'S); BRAKE REPAIR (BRAKE SPRING): AND HOSE CLAMP (WIRE) |
| MIL R 46259 : A NOTICE 1 | ROCKET MOTOR, M3A2 PARTS FOR |
| MIL T 28902 : B (1) | TROUSERS, MEN'S: MUSICIANS |
| MIL-F-52594 Revision A:1975 | FLOODLIGHT SET, ELECTRIC, PACKAGING OF |
| MIL-C-13902 Revision A:1956 | COATING COMPOUND, ACETYLENE TETRACHLORIDE RESISTANT |
| MIL-I-8835 Revision A:1984 | INDICATOR, HUMIDITY, CARD, CHEMICALLY IMPREGNATED |
| MIL-C-70784 Base Document:1989 | CARTRIDGE, 25mm ARMOR PIERCING DISCARDING SABOT TRACER (APDS-T), M791, REFERENCE |
| MIL-T-43624 Revision B:1991 | THREAD, POLYESTER, SPUN |
| MIL C 85623 : 0 | CARTRIDGE, 25 MM, TARGET PRACTICE PGU-23/U |
| MIL-M-16125 Revision C:1963 | METERS, ELECTRICAL, FREQUENCY |
| MIL-P-82650 Base Document:1976 | PLASTIC MOLDING MATERIAL, GLASS PHENOLIC |
| MIL-P-44247 Base Document:1936 | PACK, PARACHUTIST S, AT4 ROCKET |
| MIL-S-40059 Revision E:1989 | SEPARATORS, SUSPENSION LINE, PARACHUTE |
| MIL-B-44168 Revision A:1988 | BAG, CARRYING; PROTECTIVE ENSEMBLE, NUCLEAR, BIOLOGICAL, CHEMICAL (NBC) |
| MIL-C-3774 Revision B:1991 | CRATE, WOOD, OPEN 12,000 AND 16,000 POUND CAPACITY |
| MIL-C-52950 Revision A:1991 | CRATE, WOOD OPEN & COVERED |
| MIL-B-44426 Revision B:1995 | Boots, Intermediate Cold/Wet (No S/S Document) |
| MIL-A-3167 Revision A:1976 | ADHESIVE (FOR PLASTIC INHIBITORS) |
| L-P-527 Revision B:1973 | PLASTIC SHEET, STYRENE-BUTADIENE |
| MIL C 46746 : D NOTICE 1 | CARRIER, COMMAND POST, LIGHT TRACKED, M577 AND M577A1, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-C-44107 Revision C:1991 | COVER, GROUND TROOPS - PARACHUTISTS HELMET |
| MIL-C-43831 Revision B:1988 | CARRIER, INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, PLASTIC, LC 1 |
| MIL C 45360 : H | CARRIERS, PERSONNEL, FULL-TRACKED: ARMORED, M113A2, AND M113A3; MORTARS, SELF-PROPELLED: 107 MM, M106, M106A2, AND 81 MM, M125A1 AND M125A2, AND 120 MM, M1064; AND SMOKE GENERATOR: M1059; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL S 83352 : B | SIGNAL KIT, PERSONNEL, DISTRESS, A/P25S-5A |
| MIL-S-51422 Revision B:1987 | SHELTER AND ENTRANCE ASSEMBLY - CHEMICAL-BIOLOGICAL SHELTER SYSTEM: INFLATABLE |
| O-A-451 Revision F:1975 | AMMONIUM HYDROXIDE, TECHNICAL |
| MIL-B-16924 Revision C:1972 | BLOOD RECIPIENT SET, INDIRECT TRANSFUSION |
| MIL-L-44333 Revision A:1990 | LASAGNA, WITH MEAT SAUCE, THERMOSTABILIZED, TRAY PACK |
| MIL-A-55138 Revision B:1965 | ANTENNA AT-784()/PRC |
| MIL-T-48134 Revision A:1973 | TEST SET, BLASTING CAP, M51 PARTS, ASSEMBLING AND PACKING |
| MIL-B-45022 Revision F:1992 | BLAST CLEANING CABINETS |
| MIL-DTL-28839 Revision B:2013 | Waveguides, Elliptical General Specification for |
| MIL-R-52915 Revision B:1994 | RECHARGE/RECOVERY UNIT, FIRE EXTINGUISHER, MONOBROMOTRIFLUOROMETHANE (CF3BR) PNEUMATIC POWERED |
| MIL-C-82822 Base Document:1989 | CATALYST, BURNRATE |
| MIL-P-52855 Revision A:1979 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE 15 KW, 400 HERTZ AN/MJQ-15 |
| MIL-F-37367 Revision A:1976 | ENTANYL CITRATE INJECTION USP |
| MIL-A-50424 Base Document:1969 | ACETAL, SHEETING (FOR USE WITH AMMUNITION) |
| MIL C 4928 : A | CHARGER, BATTERY, SILICON DIODE, TYPE A-1 |
| MIL-A-37890 Base Document:1978 | ANTIVENIN, CROTALINE, POLYVALENT, USP |
| A-A-2752 Base Document:0199 | INK, WRITING FOR FOUNTAIN AND DIP PENS |
| A-A-2784 Base Document:1992 | INK, ROLL |
| TT-E-781 Revision D:1992 | ETHYLENE GLYCOL MONOETHYL ETHER, TECHNICAL |
| MIL W 15000 : K | WATER-TESTING CHEMICALS, BOILER, SHIPBOARD USE |
| MIL-C-82805 Base Document:1989 | COMPOUND, SILICONE RUBBER, HIGH STRENGTH, TWO-PART |
| MIL-C-29475 Base Document:1994 | COATING, WATER BORNE POLYURETHANE CAMOUFLAGE |
| SAE ARP 899 : 2013 | TUBE FITTINGS, FLUID SYSTEMS, PERMANENT TYPE, GENERAL REQUIREMENTS FOR |
| MIL C 15370 : F | COUPLERS, DIRECTIONAL GENERAL SPECIFICATION FOR |
| MIL-G-413 Revision C:1986 | GLUE, MARINE, AND AVIATION MARINE [WATERPROOF] |
| GGG-B-376 Revision B:1963 | BIT, SCREW-DRIVER, (TAPERED SQUARE SHANK, FLAT TIP AND CROSS TIP) |
| ASTM A 740 : 1998 : R2008 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM A 853 : 2004 | Standard Specification for Steel Wire, Carbon, for General Use |
| SAE AMS T 9046 : 2006 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP, AND PLATE |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| SAE AMS P 46112 : 2002(S2015) | PLASTIC SHEET AND STRIP, POLYIMIDE |
| SAE AS 21608 : 2012 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
| SAE AMS P 21922 : 2016 | PLASTIC RODS AND TUBES, POLYETHYLENE |
| SAE AS 6625 : 1997 | SPRAY EQUIPMENT, AIRCRAFT WINDSHIELD, ANTI-ICING |
| ASTM B 241/B241M : 2016 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube |
| ASTM B 102 : 2000 | Standard Specification for Lead- and Tin-Alloy Die Castings |
| NASM 7838 : 2004 | BOLT, INTERNAL WRENCHING, 160 KSI FTU |
| ASTM E 1091 : 2013 : REDLINE | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
| SAE AS 85731 : 2015 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION FOR |
| ASTM C 220 : 1991 : R2004 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM C 746 : 1990 : R2008 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| SAE AIR 4170 : 2016 | RETICULATED POLYURETHANE FOAM EXPLOSION SUPPRESSION MATERIAL FOR FUEL SYSTEMS AND DRY BAYS |
| ASTM F 1533 : 2001 | Standard Specification for Deformed Polyethylene (PE) Liner |
| ASTM F 872 : 1984 : R1990 | Specification for Filter Units, Air Conditioning: Viscous-Impingement Type, Cleanable (Withdrawn 1999) |
| SAE MA 2151 : 2015 | CLAMP ASSEMBLIES, SADDLE OR OMEGA STYLE, TWO POINT MOUNT, MULTIPLE SHAPES, METRIC |
| ASTM A 47/A47M : 1999 | Standard Specification for Ferritic Malleable Iron Castings |
| SAE AS 4157 : 2017 | COUPLING ASSEMBLIES, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT, 8000 POUNDS PER SQUARE INCH, GAGE |
| ASTM C 663 : 1998 : R2003 : EDT 2 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM C 668 : 1998 : R2008 | Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM C 222 : 1997 : R2008 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM B 900 : 2016 : REDLINE | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| ASTM B 176 : 2018 : REDLINE | Standard Specification for Copper-Alloy Die Castings |
| ASTM A 911/A911M : 2015 : REDLINE | Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties |
| SAE AMS W 21425 : 1999 | WIRE, STEEL, HIGH CARBON, SQUARE, UNCOATED, FOR MECHANICAL SPRINGS (GENERAL PURPOSE) |
| ASTM F 1348/F1348M : 1991 : R2002 | Standard Specification for Pneumatic Rotary Descaling Machines |
| ASTM F 1335 : 2004 | Standard Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service (Withdrawn 2011) |
| ASTM B 221 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes |
| ASTM F 1665 : 2008 : R2013 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| SAE AMS S 851 : 1999 | STEEL GRIT, SHOT AND CUT WIRE SLOT; AND IRON GRIT AND SHOT-BLAST CLEANING AND PEENING |
| ASTM D 2235 : 2004 : R2011 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM A 500 : 2003 | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM F 1336 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings |
| ASTM A 853 : 2004 : R2010 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM F 1735:2009 | Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 2658 : 2007 | Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings |
| ASTM F 1499 : 2017 : REDLINE | Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV) |
| ASTM B 865 : 2004 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM A 623 : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements |
| ASTM A 519/A519M : 2017 : REDLINE | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM B 167 : 2011 | Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| ASTM C 223 : 1998 : R2003 | Standard Specification for Asbestos-Cement Siding |
| ASTM F 441/F441M : 2015 : REDLINE | Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 |
| ASTM F 1733 : 2013 : REDLINE | Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing |
| ASTM A 970/A970M : 2017-12 | SPECIFICATION FOR HEADED STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM F 845 : 1996 | Standard Specification for Plastic Insert Fittings for Polybutylene (PB) Tubing (Withdrawn 2003) |
| ASTM B 211M : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) (Withdrawn 2019) |
| ASTM A 764 : 2007 : R2017 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM F 1245 : 1989 | SPECIFICATION FOR FAUCETS, SINGLE AND DOUBLE, COMPRESSION AND SELF-CLOSING TYPE, SHIPBOARD |
| ASTM A 135/A135M : 2009 | Standard Specification for Electric-Resistance-Welded Steel Pipe |
| ASTM A 615/A615M : 2016-03 | SPECIFICATION FOR DEFORMED AND PLAIN CARBON-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM B 85 : 2003 | Standard Specification for Aluminum-Alloy Die Castings |
| ASTM A 854/A854M : 2008 : R2013 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| ASTM A 740:1998 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM C 663 : 1998 : R2014 | Standard Specification for Asbestos-Cement Storm Drain Pipe (Withdrawn 2019) |
| ASTM F 1665 : 2008 : R2018 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 1345 : 2010 | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM F 1183 : 1996 : R2006 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 1183 : 1996 : R2002 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 480 : 2014 : REDLINE | Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 |
| ASTM D 2282 : 1999 : R2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Withdrawn 2007) |
| ASTM F 288 : 1996 : R2014 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| ASTM D 2680 : 2001 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| ASTM F 1697:2009 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit <a href="#fn00002"></a> |
| ASTM B 236 : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) |
| ASTM E 674 : 2012 : R2016 | Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) |
| ASTM F 1665 : 2008 | Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence |
| ASTM F 3253 : 2017 | Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems |
| ASTM B 80 : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sand Castings |
| ASTM C 223 : 1998 : R2008 | Standard Specification for Asbestos-Cement Siding |
| ASTM F 2562/F2562M : 2015 : REDLINE | Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage |
| ASTM E 786 : 1981 : R2017 | Standard Specification for Dishes, Evaporating, Platinum |
| ASTM B 211 : 2012 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire |
| MIL-P-82442 Base Document:1966 | PUMP, SEA WATER |
| MIL-M-82433 Revision A:1972 | MOTOR, DIRECT CURRENT)(FOR TORPEDO MK 46 MOD 1) |
| MIL-P-82436 Base Document:1966 | PUMP, FUEL |
| MIL-DTL-85061 Revision C:2009 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
| MIL-T-9720 Revision F:1984 | Truck, Lift, Aerial Stores, 3000 Pounds Capacity MJ-1A and MJ-1B |
| MIL-C-17889 Revision D:1974 | COAT, SHOOTING, COTTON SATEEN, GREEN |
| SAE AS 82819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
| ASTM B 32 : 2008 | Standard Specification for Solder Metal |
| SAE AS 5830 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF-BONDING, PROCUREMENT SPECIFICATION |
| ASTM C 746 : 1990 : R2014 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading (Withdrawn 2019) |
| MIL-P-53087 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE-DRIVE, TRAILER MOUNTED, 3KW, 60 HERTZ, AN/MJQ-32 |
| MIL H 38390 : C | HOSE ASSEMBLY, TETRAFLUOROETHYLENE PNEUMATIC, HIGH PRESSURE |
| RR-S-617 Revision D:1974 | SPOON, FOOD SERVICE, BASTING, STRAINING AND MIXING |
| MIL-C-70725 Revision A:1993 | CARTRIDGE, 5.56MM, M862 SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| GGG-G-521 Revision E:1988 | GOGGLES, INDUSTRIAL, RESILIENT FRAME |
| MIL-T-17286 Revision D:1989 | TURBINES AND GEARS, SHIPBOARD PROPULSION AND AUXILIARY STEAM, PACKAGING OF |
| MIL-L-9131 Revision H:1983 | LIFE RAFTS, INFLATABLE, TWENTY MAN |
| MIL-F-2763 Revision B:1966 | FILTER, LIGHT, OPTICAL INSTRUMENT, BINOCULAR |
| MIL-L-38200 Revision B:1966 | LIFE PRESERVER, UNDERARM, ADULT LPU 5/P |
| MIL-T-89301 Revision A:1995 | 1:50,000 SCALE TOPOGRAPHIC MAPS OF FOREIGN AREAS |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-B-15004 Revision A:1953 | Balloon, Aerological |
| MIL M 63016 : A | MANUAL, TECHNICAL, MUNITIONS EQUIPMENT |
| GG H 1488 : A NOTICE 1 | HOLDER, DESK TRAY LABEL |
| MIL C 51363 : 0 | CANISTER, COLORED SMOKE, 155MM, SHELL, M3 & M4, COMPONENTS FOR |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| ASTM B 483/B483M : 2013 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Pipe for General Purpose Applications |
| MIL-L-43672 Revision C:1983 | Liner, Snow Camouflage Trousers: White Arctic, M-65 (No S/S Document) |
| MIL-S-10858 Revision H:1983 | SHIRT, COLD WEATHER, FIELD WOOL/NYLON, OLIVE GREEN 108 |
| MIL S 37446 : 0 | SPECTINOMYCIN HYDROCHLORIDE, STERILE USP |
| MIL-P-37565 Base Document:1977 | POTASSIUM CHLORIDE INJECTION USP |
| SAE AMS S 6758 : 2017 | STEEL, CHROME-MOLYBDENUM (4130) BARS AND REFORGING STOCK (AIRCRAFT QUALITY) |
| MIL-F-14252 Base Document:1956 | FIRE CONTROL MATERIAL, GENERAL SPECIFICATION GOVERNING THE DESIGN AND INSPECTION OF. |
| MIL-P-37415 Base Document:1976 | PANCURONIUM BROMIDE INJECTION |
| MIL-M-37282 Revision A:1976 | MANNITOL INJECTION USP |
| MIL-I-37761 Revision A:1977 | INFLUENZA VIRUS VACCINE, USP, GENERAL SPECIFICATION FOR |
| MIL-A-52435 Revision D:1984 | AIR CONDITIONER: BASE MOUNTED, AIR-COOLED, 208-VOLT, 3-PHASE, 50- AND 60-HERTZ AC, SINGLE- PACKAGE, 36,000 BTU/HR |
| MIL-A-23773 Revision A:1967 | ANCHOR, UNDERWATER MINE, MARK 56 MOD 4 AND MOD 5 |
| MIL-P-37563 Base Document:1977 | PROCHLORPERAZINE MALEATE TABLETS USP |
| MIL-B-36939 Base Document:1973 | BLOOD COLLECTING-DISPENSING BAG AND DONOR SET, SINGLE BAG WITH 63CC ANTICOAGULANT, DISPOSABLE, 6S |
| MIL-P-17802 Revision E:1987 | PADLOCK AND PADLOCK SETS, LOW SECURITY, KEY OPERATED, REGULAR (OPEN) SHACKLE |
| MIL-B-85735 Base Document:1985 | BALLISTIC MODIFIER LC-12-15 |
| MIL-S-82793 Base Document:1989 | SEALANT, UF 3195 |
| MIL-T-37759 Revision A:1978 | THIETHYLPERAZINE MALATE INJECTION, NF |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| MIL-P-82797 Base Document:1989 | PRIMER FOR THERMAL BARRIER MATERIAL & HIGH TEMPERATURE SEALANTS |
| MIL-A-81264 Base Document:1965 | ASBESTOS FELT OR MAT, RESIN IMPREGNATED |
| HH-I-1972-2 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH ASPHALT/ORGANIC FELT, ASPHALT/ASBESTOS FELT OR ASPHALT/GLASS FIBER FELT ON BOTH SIDES OF THE FOAM |
| MIL-B-1291 Revision D:1970 | BAG, COTTON DUCK, TOOLS AND MAINTENANCE PARTS, STOVE, COOKING OUTFIT |
| MIL T 82786 : NOTICE 1 | TAPE, CARBON CLOTH, PHENOLIC IMPREGNATED |
| MIL-B-52690 Revision B:1987 | BRACKET PUSHING, BOW ATTACHMENT, 12-TON PNEUMATIC HALF FLOAT |
| MIL-C-83982 Base Document:1974 | COMPOUND, SEALING, FLUID RESISTANT |
| MIL-S-44355 Base Document:1988 | SIGN MAKING KIT, PORTABLE |
| MIL-R-29565 Revision A:1990 | ROCKET MOTOR, MK 125 MOD 1 |
| JJJ-S-791 Revision L:1974 | SUGAR, REFINED AND BROWN: BEET OR CANE |
| MIL-B-14632 Revision C:1991 | BADGE, QUALIFICATION, ROTC AND NDCC, GENERAL SPECIFICATION FOR |
| MIL-S-45005 Revision C:0198 | SEAL, PLAIN, AND SEAL, PLAIN, ENCASED, FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEAL |
| MIL-H-38360 Revision B:1966 | HOSE, ASSEMBLIES, TETRAFLUOROETHYLENE, HIGH-TEMPERATURE, HIGH PRESSURE, 3000 PSI HYDRAULIC AND PNEUMATIC |
| MIL-A-37670 Base Document:1977 | ACETAZOLAMIDE TABLETS, USP |
| U-A-408 Revision A:1965 | ALCOHOL, DEHYDRATED, ANALYZED REAGENT |
| MIL-C-37306 Base Document:1976 | CHLORPHENIRAMINE MALEATE, ISOPROPAMIDE IODIDE, AND PHENYLPROPANOLAMINE HYDROCHLORIDE CAPSULES |
| MIL-M-9397 Revision E:1979 | FREQUENCY CONVERTER, MOBILE, TYPE MC-1A |
| WW-P-405 Revision B:1974 | PIPE, CORRUGATED (IRON OR STEEL, ZINC COATED) |
| MIL-D-36379 Base Document:1965 | DIATRIZOATE SODIUM FOR ORAL SOLUTION, 250 GM |
| MIL-C-1410 Revision F:1985 | CHAIN, HOOK AND RING ASSEMBLY, TENT |
| MIL-C-55508 Base Document:1966 | COIL ASSEMBLY, TELEPHONE LOADING CU-260( ) /G |
| MIL-B-36446 Revision A:1973 | BURS, DENTAL SURGERY |
| MIL M 37869 : LATEST | MICROSCOPE, OPTICAL, BINOCULAR |
| GG-T-321 Revision D:1977 | THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY AND PIPING SYSTEMS |
| MIL-M-51282 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, FIELD, M17A1 |
| MIL-C-71010 Base Document:1994 | Covers, Camouflage for Tiles, Armor, for the M2A2/M3A2 Bradley Fighting Vehicle Systems (BFVS) |
| MIL-B-593 Revision H:1990 | BRAID, TEXTILE (FLAT) |
| MIL I 25689 : A NOTICE 1 | INDICATOR, ELECTRICAL TACHOMETER |
| PPP-B-638 Revision B:1975 | BOX, CAPS, LINERS AND SLEEVES, FIBERBOARD, KNOCKED DOWN, FLAT, PACKING OF |
| MIL P 22629 : NOTICE 3 | PRINTED WIRING BOARDS |
| MIL-F-51318 Revision A:1988 | FILTER UNIT, GAS-PARTICULATE, EMD, 300 CFM, M6A2 |
| MIL-G-48246 Base Document:1973 | GLYCERYL ESTER OF 12 HYDROXY STEARIC ACID |
| GGG-D-326 Revision C:1964 | DIGGER; POSTHOLE, HINGED |
| MIL S 81127 : 0 | SIMULATOR LAUNCHER AND MISSILE MARK 6 MOD 2 |
| MIL S 6807 : D | SWITCHES, ROTARY, SELECTOR POWER - GENERAL SPECIFICATION FOR |
| MIL-S-10699 Revision B:1977 | SALT, HEATING TREATING [FOR METALS] |
| DDD-R-00255 Base Document:1971 | RIBBON, ADDRESS PLATE MACHINE |
| MIL-B-36268 Base Document:1964 | BEAKER, LABORATORY (POLYPROPYLENE) |
| GGG-B-121 Revision B:1964 | BAR, SINE; PLATE SINE (AND FIXTURES) |
| MIL-D-5549 Revision B:1971 | DOPE, CELLULOSE ACETATE BUTYRATE CLEAR FOR AIRCRAFT USE |
| GGG-K-471 Revision C:1963 | KNIFE, DRAW |
| MIL H 3586 : E | HOLDFAST ASSEMBLY CHAIN TYPE |
| MIL-P-85121 Base Document:1980 | PROJECTILES, 20MM MARK 100 SERIES |
| PPP-B-28 Revision A:1973 | BAG, PLASTIC (SANDWICH) |
| NNN-W-25 Revision B:1976 | WASH BOTTLES LABORATORY |
| MIL-C-85624 Base Document:1983 | CARTRIDGE, 25 MILLIMETER, PGU-20/U (API) |
| AA-F-355 Revision B Interim Revision:1972 | FILING CABINET STEEL, LEGAL AND LETTER SIZE, INSULATED |
| MIL-T-5695 Revision D:1973 | TUBING, STEEL, CORROSION-RESISTANT (304), COLD DRAWN |
| MIL-T-55431 Revision A:1968 | TEST SET, BATTERY AN/PSM-13 ( ) |
| MIL-C-47071 Base Document:1974 | COATING, ABLATIVE, PHENOLIC EPOXY RESIN SYSTEM |
| MIL-P-48296 Base Document:1974 | POLYTETRAFLUOROETHYLENE (PTFE) |
| ASTM F 771 : 1999 : EDT 1 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| MIL I 23053 : D | INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE MODIFIED FLUOROPOLYMER, CROSSLINKED |
| MIL F 23938 : A | FERRIC OXIDE |
| MIL-H-28719 Base Document:1970 | HEADER, HERMETICALLY SEALED |
| MIL-T-37402 Base Document:1977 | TESTER, ANTIFREEZE, SOLUTIONS |
| MIL-C-10544 Revision C:1962 | CONNECTORS, PLUG & RECEPTACLE (ELECTRICAL, AUDIO, WATERPROOF, TEN CONTACT, POLARIZED) |
| MIL-T-37000 Base Document:1973 | TUBE, BLOOD COLLECTING, VACUUM, STERILE |
| SAE AS 8181 : 1997 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS, GENERAL SPECIFICATION FOR |
| O-D-210 Revision A:1976 | DESICCANT, ACTIVATED, CALCIUM SULFATE, ANHYDROUS |
| MIL-I-81564 Base Document:1967 | INITIATOR, CARTRIDGE ACTUATED, MARK 12 MOD O |
| GG-D-441 Revision B:1957 | DISPENSER, STRIP, DENTAL |
| MIL-P-23242 Revision B:1982 | PLASTIC COATING COMPOUND, STRIPPABLE - ELECTROPLATING |
| MIL-C-43859 Revision A:1978 | COUPLING, EXTRACTION FORCE TRANSFER, AIRDROP |
| MIL-PRF-21922 Revision C:2015 | PLASTIC RODS AND TUBES, POLYETHYLENE |
| MIL-HDBK-772 Base Document:1981 | MILITARY PACKAGING ENGINEERING |
| MIL-A-11892 Base Document:1952 | ANTENNA GROUP OA-249( )/GRC-10 (COMPONENTS OF) |
| MIL-T-18833 Base Document:1955 | TAPE INHIBITING, ETHYL CELLULOSE |
| MIL-C-357 Revision A:1946 | CHEMICAL AGENT, TITANIUM TETRACHLORIDE |
| GR 2971 CORE : ISSUE 1 | GENERIC REQUIREMENTS FOR ESD SIGNS, SYMBOLS AND AWARENESS |
| MIL-F-70676 Base Document:1988 | Ferric Acetylacetonate |
| MIL O 51499 : A NOTICE 1 | |
| DOD-B-24504 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER ZINC ALKALINE TYPE (FOR DOLPHIN) (METRIC) |
| MIL M 1018 : H | MEAT CUTS AND SAUSAGE PRODUCTS [CHILLED OR FROZEN] FOR DOMESTIC AND OVERSEAS SHIPMENT, PACKAGING, PACKING, LABELING & MARKING OF |
| MIL-B-36492 Base Document:1966 | BED, ORTHOPEDIC |
| GGG-V-410 Revision B:1993 | VISE, BENCH BASE; SHEET METAL-WORKER'S; BENCH AND PIPE; JEWELER'S; MACHINISTS; AND MULTIPOSITION |
| MIL R 14293 : A | RESISTOR, FIXED, HIGH MEGOHM (HERMETICALLY SEALED) |
| MIL S 15083 : B | STEEL CASTING (NAVY) |
| MIL-T-25193 Revision B:1961 | Transmitter, Remote Compass, Type C-2 (Unstabilized) |
| MIL-C-19516 Revision G:1991 | COAT, MAN'S, WOOL, GABARDINE, BLUE (WITH BELT) |
| MIL-PRF-26542-9 Revision C:2002 | MICROPHONE ASSEMBLY AND MICROPHONE, DYNAMIC, M26542/9-01 AND M-133/U |
| MIL-I-5170 Revision C:1987 | INDICATOR, POSITION, HORIZONTAL STABILIZER |
| MIL-G-52552 Revision B:1981 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU656/G |
| MIL-A-85116 Base Document:1980 | Actuator, Piston, Miniature |
| MIL-T-6841 Revision D:1992 | TAPE AND SHEET, ADHESIVE, RUBBER AND CORK COMPOSITION |
| MIL-A-48826 Base Document:1975 | ACTUATOR, EXPLOSIVE LOADING, ASSEMBLING AND PACKING |
| SS-C-646 Revision B:1969 | CRAYON, MARKING, LUMBER |
| MIL-S-52098 Revision C:1992 | STIFFENER ASSEMBLY, BALK CONNECTING |
| MIL-C-82829 Base Document:1989 | CARBON BLACK |
| DOD PRF 24176 : B | CEMENT, EPOXY, METAL REPAIR AND HULL SMOOTHING (METRIC) |
| MMM-A-250 Revision C:1975 | ADHESIVE, WATER-RESISTANT (FOR CLOSURE OF FIBERBOARD BOXES) |
| MIL-B-43826 Revision C:1989 | BELT, INDIVIDUAL EQUIPMENT |
| MIL-G-52537 Revision C:1980 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 10KW 400 HERTZ PU-375B/G |
| MIL-P-52539 Revision B:1984 | PIPELINE WELD SET TESTING |
| NNN C 435 : B NOTICE 1 | |
| HH-I-1972-4 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH GYPSUM BOARD ON SIDE AND ALUMINUM FOIL OR ASPHALT/ORGANIC FELT ON THE OTHER SIDE OF THE FOAM |
| MIL-P-63201 Base Document:1983 | PROPELLANT, SOLVENTLESS, TYPE M37 FOR PROJECTILE, 155MM, HE, ROCKET ASSISTED, M549 AND M549A1 |
| MIL C 46409 : D | CARTRIDGE, CALIBER .38, SPECIAL, BALL, M41 |
| MIL-L-43536 Revision F:1989 | LINER, COLD WEATHER COAT |
| MIL-C-37068 Base Document:1975 | CONNECTOR, ELASTIC TUBING, BRANCHED, PLASTIC, Y-SHAPED |
| MIL-L-24247 Revision C:1990 | LIFE PRESERVER, VEST TYPE, U.S. NAVY, MARK 1 |
| MIL-A-50013 Revision B:1969 | ADAPTERS, CLUSTER, BOMB, 750-POUND, M30 AND M30A1 |
| GG-S-733 Base Document:1957 | STAND, BED SERVICE, (ALUMINUM) |
| MIL-T-301 Revision A:1961 | TRIACETIN (GLYCERYL TRIACETATE) |
| MIL-S-8812 Revision D:1975 | STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR |
| MIL-G-52495 Revision B:1980 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 5 KW 60 HERTZ PU618/M |
| PPP-T-495 Revision B:1974 | TUBES, MAILING, AND FILING |
| ASTM A 21 : 1994 : R1999 | Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003) |
| MIL-L-25798 Revision D:1984 | LIFE PRESERVER, UNDERARM, CASUALTY, TYPE MB-1 |
| FF-W-100 Revision C:1969 | WASHER, LOCK, TOOTH |
| MIL-F-81265 Base Document:1990 | FIBER, ASBESTOS |
| MIL-S-7720 Revision A:1967 | STEEL, CORROSION RESISTANT [18.8] BARS, WIRE AND FORGING STOCK [AIRCRAFT QUALITY] |
| MIL-S-8710 Revision B:1969 | STRAINER, AIRFRAME FUEL SYSTEM, GENERAL SPECIFICATION FOR |
| MIL-B-3493 Revision D:1985 | BUCKLES, END BAR WITH TONGUE (FOR LEATHER) |
| MIL-B-18-60 Revision D:1985 | BATTERY, DRY, BA-234/U |
| MIL-E-87235 Base Document:1985 | EMERGENCY ESCAPE, AIRCRAFT (REQUEST FOR ISSUE MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL-I-82877 Base Document:1992 | IGNITION ELEMENT, PVU-15/B |
| MIL T 5421 : B | TUBE, PITOT, ELECTRICALLY HEATED, AIRCRAFT |
| PPP-P-1134 Revision D:1983 | PACKAGING OF COTTON AND COTTON SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) |
| MIL-B-2316 Revision E:1992 | BAKERY EQUIPMENT, INCLUDING UNITS ASSEMBLIES REPAIR PARTS AND TOOLS, PREPARATION FOR DELIVERY OF |
| MIL-B-2054 Revision E:1969 | BOWLS, FOOD MIXING, CORROSION-RESISTING STEEL |
| MIL-S-81551 Base Document:1968 | SWITCH, TOGGLE, HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-M-9868 Revision E:1993 | MICROFILMING OF ENGINEERING DATA 35 MM REQUIREMENTS FOR |
| MIL-T-10646 Revision D:1988 | Telescope, Straight: M90 Series, M90A2 and M90A3 |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| MIL-DTL-25666-6 Base Document:1980 | Converter, Liquid Oxygen GCU-20/A |
| SAE AS 50571 B : 2016 | LIGHTS, INSTRUMENT, INDIVIDUAL, GENERAL SPECIFICATION FOR |
| MIL S 87142 : 0 | SHIRT, MAN'S, SHORT SLEEVE, POLYESTER COTTON (DURABLE PRESS) |
| MIL-F-3541 Revision C:1989 | FITTING, LUBRICATION, GENERAL SPECIFICATION FOR |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| MIL-M-37374 Base Document:1976 | MEPIVACAINE HYDROCHLORIDE INJECTION USP |
| MIL-P-70825 Revision A:1994 | PRIMER, BATTERY, STAB/ELECTRIC PA536 PARTS FOR, AND LOADING, ASSEMBLING AND PACKING |
| MIL W 83140 : 0 | WIRE ROPE, STEEL, (STAINLESS STEEL) PREFORMED, NONROTATING, FOR AIRCRAFT RESCUE HOIST AND CARGO HANDLING (WINCHING) |
| MIL F 14930 : NOTICE 1 | FUSE, DUMMY T 185 E3 |
| MIL C 81904 : B | COATING COMPOUND, THERMAL INSULATION, ABLATIVE |
| MIL-K-8662 Revision E:1974 | KNIFE, HUNTING, SHEATHED, SURVIVAL PILOT S |
| MIL P 27402 : B (1) | PROPELLANT, HYDRAZINE - UNS-DIMETHYLHYDRAZINE (50% N2H4 - 50% UDMH) |
| MIL-I-8505 Base Document:1948 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE -50 TO PLUS 300 C |
| MIL-H-1987 Revision G:1980 | HELMET, FIRE FIGHTERS |
| GGG-M-125-5 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS, FUMES, AND MISTS) |
| MIL-B-18184 Revision C:1989 | BELT, COAT, MAN'S, WEBBING, COTTON, WHITE |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| SAE AMS T 81914 : 2013 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL-F-48863 Revision C:1985 | FUZE, GUIDED MISSILE, M934E6 PARTS ASSEMBLY, LOADING & PACKING FOR |
| SAE ARP 1281 : 2002 | ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL S 21903 : 0 | SD-4 MOD 1 MECHANISM |
| MIL-B-43049 Revision D:1992 | BACKING PLATES, INSIGNIA, BRANCH OF SERVICE AND CAP, INFANTRY, ARMY |
| MIL-T-12625 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, POCKET TYPE |
| MIL H 18288 : 0 | HOSE AND HOSE ASSEMBLIES, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL-C-83873 Revision A:1993 | CLEANING COMPOUND, PRECOATING SURFACE, AIRCRAFT & AEROSPACE GROUND EQUIPMENT (AGE) |
| MIL-T-81148 Revision B:1972 | TRANSFORMER, DISCRIMINATOR (FOR TORPEDO MARK 37 MODS O, 2, AND 3) |
| MIL-G-47032 Revision A:1990 | GLASS, POTASH SODA BARIUM, LEAD FREE COMPRESSION SEALING |
| FED-STD-123 Revision H:2007 | MARKING FOR SHIPMENT (CIVIL AGENCIES) |
| MIL-B-11552 Revision B:1965 | BRASS POWDER (FOR SINTERING) |
| MIL P 10562 : D | PROJECTOR, STEREOPLOTTER, WIDE-ANGLE, VERTICAL MULTIPLEX MAPPING EQUIPMENT [SET OF THREE PROJECTORS IN A CASE WITH ACCESSORIES] |
| MIL-L-3851 Revision E:1991 | LOOP, SLIDE [FOR EQUIPAGE] |
| MIL-P-82579 Base Document:1973 | POWER SUPPLY, MULTIVOLTAGE, DIRECT CURRENT (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL-W-47206 Base Document:1974 | WIRE AND CABLE, ELECTRICAL, SINGLE CONDUCTOR, TWISTED PAIRS AND MULTICONDUCTOR SHIELDED AND JACKETED HIGH TEMPERATURE |
| NASA MSFC SPEC 411 : 1966 | ADHESIVE, EPOXY RESIN |
| MIL-I-47151 Base Document:1974 | INSULATING COMPOUND, ELECTRICAL EMBEDDING |
| MIL-P-21563 Revision B:1962 | POINT SYSTEM, FLUORESCENT, FOR AIRCRAFT APPLICATION (ASA) |
| MIL-T-22209 Base Document:1959 | TELESCOPE MARK 104 MOD O |
| MIL-STD-1423 Base Document:1979 | THIN LAYER CHROMATOGRAPHY PRECOATED PLATES AND SHEETS |
| MIL M 63015 : B | MANUAL, TECHNICAL, CONVENTIONAL AND CHEMICAL AMMUNITION |
| ASTM A 749/A749M : 2014 : REDLINE | Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for |
| MIL-D-50029 Revision B:1953 | DYE, VAT YELLOW 4 |
| MIL-C-768 Revision A:1990 | COPPER, POWDERED (FOR USE IN AMMUNITION) (METRIC) |
| MIL F 82795 : NOTICE 1 | FLOATS, PULP, ASBESTOS |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| MIL-R-44277 Revision A:1990 | RATION, COLD WEATHER, ASSEMBLY OF |
| MIL-W-6015 Revision A:1953 | Wire Rope, 6 By 19, High-Strength (For Aircraft Launching and Arresting) |
| MIL-A-18199 Base Document:1954 | ATTENUATOR, CN-45(*)/UP |
| MIL-S-40626 Revision D:1994 | SIGN KIT, VEHICLE CLASS |
| ASTM A 684/A684M : 2017 : REDLINE | Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled |
| MIL-M-542 Revision A:1958 | MAGNESIUM STEARATE [FOR USE IN AMMUNITION] |
| MIL F 10538 : E NOTICE 1 | FRAMES, STEREOPLOTTER PROJECTION MULTIPLEX [SINGLE AND DOUBLE] WITH CASE |
| MIL S 19984 : E | SHIRT, MAN'S, KHAKI, WITH QUARTER LENGTH SLEEVE |
| MIL V 18195 : 0 | VOLTMETER, VACUUM-TUBES-487/U |
| CSA ISO/IEC TR 24729-1 : 2014 | INFORMATION TECHNOLOGY - RADIO FREQUENCY IDENTIFICATION FOR ITEM MANAGEMENT - IMPLEMENTATION GUIDELINES - PART 1: RFID-ENABLED LABELS AND PACKAGING SUPPORTING ISO/IEC 18000-6C |
| BS ISO 17367:2013 | Supply chain applications of RFID. Product tagging |
| MIL T 46773 : A | TANK, COMBAT, FULL-TRACKED, 120MM GUN, M103, M103A1 AND M103A2, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-37309 Revision A:1976 | PYRANTEL PAMOATE ORAL SUSPENSION USP |
| MIL-T-87099 Base Document:1987 | TROUSERS, WET WEATHER |
| MIL-R-5001 Revision B:1992 | RUBBER CELLULAR SHEET, MOLDED AND HAND BUILT SHAPES, LATEX FOAM |
| MIL-S-85510 Base Document:1981 | Seats, Helicopter Cabin, Crashworthy, General Specification for |
| O-I-1279 Revision B:1993 | ION EXCHANGE RESINS |
| MIL-S-13281 Revision E:1985 | STEEL, CARBON, ALLOY, AND HIGH STRENGTH LOW ALLOY FOR WELDED STRUCTURES (STRESS RELIEVED) |
| MIL-M-12054 Revision B:1994 | MUSTARD, H (LEVINSTEIN PROCESS) |
| MIL-P-22332 Revision B:1972 | PAINT, PRIMING, EXTERIOR AND INTERIOR (FOR AMMUNITION) |
| MIL A 46186 : 0 | ARMOR PLATE, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL-PRF-26542-2 Revision E:2002 | MICROPHONE AND MICROPHONE ASSEMBLIES, M-87/AIC, M26542/2-01, M26542/2-02, M26542/2-03, AND M26542/2-04 |
| MIL C 21574 : 0 | CHAINS, STUD LINK, ANCHOR, STEEL, WELDED, SOLID-FORGED OR CAST (AMERICAN BUREAU OF SHIPPING HIGH STRENGTH CHAIN STANDARDS) |
| MIL-W-19044 Revision E:1993 | WASHER-EXTRACTOR MACHINE, LAUNDRY, COMMERCIAL (NAVAL SHIPBOARD) |
| MIL P 668 : A | |
| MIL-S-7852 Revision B:1968 | SEAT, AIRCREW, ADJUSTABLE SWIVEL TYPE E-1 |
| MIL-Y-51021 Base Document:1960 | YEAST AUTOLYSATE DRIED TECHNICAL |
| MIL-B-26793 Revision B:1958 | BLOWER, GASOLINE ENGINE DRIVEN, TYPE A-1 |
| MIL-T-48149 Revision A:1976 | Titanium Dioxide, Dry |
| MIL W 87161 : 0 | WIRE STRAND, NONFLEXIBLE, FOR AIRCRAFT CONTROL |
| GGG-S-735 Revision B:1976 | STAMPING AND MARKING EQUIPMENT; GENERAL SPECIFICATION FOR |
| MIL-A-26107 Revision D:1960 | AIR CONDITIONER, TRAILER-MOUNTED, FREON CYCLE, 11-1/2 TON REFRIGERATING CAPACITY, TYPE MA-3 |
| MIL-A-6425 Revision B:1959 | ADAPTOR, PRESSURE FUEL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL A 46118 : D | ALUMINUM ALLOY ARMOR, 2219, ROLLED PLATE AND DIE FORGED SHAPES |
| ASTM B 234M : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers (Metric) |
| MIL E 917 : E | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS (NAVAL SHIPBOARD USE) |
| MIL-M-23530 Revision A:1978 | MOCK-UPS OF MAIN AND AUXILIARY SHIPBOARD MACHINERY SPACES |
| MIL-B-11188 Revision H:1994 | BATTERIES, STORAGE: LEAD-ACID, GENERAL SPECIFICATION FOR (METRIC) |
| MIL W 25136 : 0 | WIRE W-1O6 AND W-1O6-A |
| A-A-3002 Base Document:1996 | |
| MIL-C-38404 Revision E:1992 | COUPLING, HOSE, REATTACHABLE SCREW-ON |
| MIL-V-173 Revision C:1969 | VARNISH, MOISTURE AND FUNGUS RESISTANT (FOR TREATMENT OF COMMUNICATIONS, ELECTRONICS, AND ASSOCIATED EQUIPMENT) |
| MIL-D-19403 Base Document:1956 | DRIVE, ANTENNA, VERTICAL, STABILIZATION, FOR AS-473/ASB-1 (BUORD DRAWINGS 776405, 776463, VERTICAL STABILIZATION SERVO CLUTCH, FOR ASB-1; 864390, 1444082 FOR ASB-1A) |
| GG-D-465 Revision A:1977 | DISTILLING APPARATUS, LABORATORY |
| MIL-V-18433 Revision C:1989 | VALVE, TEMPERATURE-REGULATING (THERMOSTATICALLY CONTROLLED) |
| MIL-V-22549 Revision D:1968 | VALVE, ANGLE, RELIEF, FOR GAS AND OXYGEN SERVICE (SIZES 2 INCHES LPS AND BELOW), NAVAL SHIPBOARD |
| MIL V 16271 : F | VALVE, TANK FLOAT, ANGLE AND GLOBE PATTERN |
| MIL-T-81272 Base Document:1966 | THERMOCOUPLE, ENGINE, CYLINDER, BAYONET TYPE, MS90324 |
| WW P 1432 : C | PIPE, STEEL (COAL TAR ENAMEL OR CEMENT MORTAR LINING, AND COAL TAR ENAMEL COATED AND WRAPPED |
| MIL-P-18713 Base Document:1955 | PRIMER, ELECTRIC, MARK 44 MOD 0 |
| MIL S 51430 : B | SLEEVE ASSEMBLY |
| GGG-B-451 Revision D:1968 | BLADE, HAND HACKSAW AND BLADE, POWER HACKSAW |
| MIL-C-85717 Base Document:1986 | Cartridge, 20 Millimeter, Semi-Armor Piercing High Explosive Incendiary, PGU-28/B |
| WW-C-621 Revision G:1990 | COUPLING ASSEMBLY, HOSE (FIRE, WOVEN-JACKETED, RUBBER OR FABRIC-LINED AND UNLINED) |
| TT-E-751 Revision C:1967 | ETHYL ACETATE, TECHNICAL |
| MIL S 003793 : C NOTICE 2 | SMOKE POT, HC, 30 POUND, ABC-M5 COMPONENTS FOR |
| FF-H-001687 Revision B:1976 | LOCKS, OFFICE MACHINE |
| MIL D 13138 : 0 | DETONATOR FOR M204A1 AND M206A1 HAND GRENADE FUZES |
| MIL-G-82405 Base Document:1966 | GLOVES, CLOTH, JERSEY, WORK, POLYVINYL IMPREGNATED |
| MIL B 11546 : 0 | BOMB, INCENDIARY, INSTRUCTIONAL, M2A1; COMPONENTS FOR |
| MIL-E-82756 Base Document:1994 | EXPLOSIVE, PLASTIC BONDED, CAST PBXN-103 |
| GGG-H-575 Base Document:1962 | HOLDERS; SHEET METAL, HOLE AND EDGE GRIP |
| MIL-G-46030 Revision E:1984 | GLUE, ANIMAL (PROTECTIVE COLLOID) |
| MIL-C-0043584 Revision C:1985 | COUNTER, CHECKOUT, CONVEYOR |
| MIL-P-82658 Base Document:1977 | Polymer, Liquid, Polybutadiene, Carboxy Terminated |
| MIL W 17337 : F | WEBBING, TEXTILE, WOVEN NYLON |
| MIL-L-37635 Base Document:1978 | LIDOCAINE HYDROCHLORIDE INJECTION, MODIFIED |
| O-S-595 Revision B:1967 | SODIUM DICHROMATE, DIHYDRATE, TECHNICAL |
| L-P-383 Base Document:1967 | PLASTIC MATERIAL, POLYESTER RESIN, GLASS FIBER BASE, LOW PRESSURE LAMINATED |
| MIL-P-8587 Revision B:1993 | PLASTIC, SHEET, COLORED, INSTRUMENT FLYING TRAINING |
| MIL P 28958 : LATEST | PARKA, AND TROUSERS, WET WEATHER: LIGHTWEIGHT |
| GG-B-823 Revision C:1975 | BURS, DENTURE TRIMMING, HIGH SPEED TOOL STEEL |
| MIL-B-11007 Revision E:1968 | BURSTER, BOMB, AN-M20 |
| MIL C 48360 : 0 | CHARGE, PROPELLING, M200, FOR 105 MM HOWITZER, M119 LOADING, ASSEMBLING, AND PACKING |
| MIL P 223 : B | POWDER, BLACK |
| MIL-S-50087 Revision C:1968 | SEPARATOR, DUST |
| MIL R 83322 : 0 | RUBBER, CARBOXY NITROSO, NITROGEN TETROXIDE (N204) RESISTANT |
| L-P-00315 Revision D:1976 | PIPE AND TUBING, NONMETALLIC (PLASTIC) |
| MIL-A-22055 Base Document:1962 | AMPLIFIER MARK 140 MODS 0, 1, AND 2 |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| GGG-H-131 Revision C:1957 | HATCHET (CLAW, HALF, LATHING, BROAD AND BARREL) |
| MIL-B-50873 Revision A:1971 | BAG, BARRIER, ELASTOMERIC |
| WW-P-521 Revision G:1977 | PIPE FITTINGS, FLANGE FITTINGS, AND FLANGES, STEEL AND MALLEABLE IRON (THREADED AND BUTT WELDING) CLASS 150 |
| MIL-F-22839 Revision D:1988 | FURNITURE, MODULAR TYPE, STEEL, FIELD OFFICE |
| MIL-A-85317 Base Document:1980 | ACTUATOR, ELECTRO-PYROTECHNIC, LINEAR, ATU-89/B |
| MIL-F-50052 Base Document:1959 | FILTER, GAS AND PARTICULATE, 1,200 CFM, M15 |
| GGG-S-69 Revision D:1983 | SAW, POWER HACK, DRY CUT, PORTABLE (3-INCH CAPACITY) |
| AAA-B-92 Revision D:1977 | BALANCE, ANALYTICAL |
| GG-P-146 Revision A:1956 | PEN SETS, DESK (FOR GENERAL OFFICE USE) |
| MIL-D-18504 Base Document:1955 | Detonator MK 27 Mod 0 |
| MIL T 14147 : A | TEST FACILITIES KIT, TELEPHONE CARRIER MK-155 ()/TCC |
| FF-T-305 Revision C:1974 | THUMBSCREW |
| MIL-B-87258 Base Document:1991 | BAG, SLEEPING, ARCTIC SURVIVAL, PRESSURE/VACUUM PACKED |
| MIL-V-8610 Revision B:1984 | VALVE, FUEL SHUTOFF SOLENOID OPERATED, 28 VOLT, DC |
| MIL-C-81788 Base Document:1970 | CARTRIDGE, DELAY, MARK 4 MOD 2, MARK 5 MOD 2 AND MARK 6 MOD 2 |
| ZZ-H-466 Revision C:1968 | HOSE ASSEMBLY, METAL (RUBBER COVERED), HYDROCARBON CONVEYING |
| MIL-J-28976 Revision A:1985 | JACKET, MEN'S MESS, WHITE [STAFF, NONCOMMISSIONED OFFICERS] |
| MIL-D-48499 Base Document:1974 | DIISOPROPYL HYDROGEN PHOSPHITE, TECHNICAL |
| MIL-S-51132 Revision A:1964 | SODIUM CARBOXYMETHYL CELLULOSE (NACMC) (FOR AMMUNITION USE) |
| MIL-HDBK-775 Base Document:1996 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| MIL-C-51330 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M12 |
| MIL-T-52991 Revision A:1992 | TABLE, SCRIBING, TRACING, DRAFTING, FLIP TOP |
| MIL V 12126 : E | VALVE, GATE, BRONZE, LEVER OPERATED, QUICK OPENING, 125 PSI AND 150 PSI |
| MIL-P-43081 Revision B:1973 | PLASTIC MOLDING MATERIAL (PLOTTING AND IMPREGNATING) POLYETHYLENE LOW MOLECULAR WEIGHT. |
| MIL-B-48600 Revision A:1979 | BASE PLUG ASSEMBLY |
| MIL-T-19247 Revision A:1961 | TANK, LIQUID STORAGE, NONMETALLIC, MARINE OIL AND WATER SERVICE |
| MIL-T-51398 Revision A:1979 | TEST SET, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M74 |
| MIL-T-47060 Base Document:1974 | |
| MIL-S-82492 Base Document:1967 | SWITCH, INTEGRATOR MARK 62 MOD 2 |
| MIL-B-16541 Revision B:1964 | BRONZE, VALVE CASTINGS |
| MIL P 60340 : A | PROJECTILE, 155MM, SMOKE, HC, BE, M116E2, PARTS FOR |
| GGG-T-001310 Base Document:1967 | TAPE, FISH, STEEL |
| JJJ-S-351 Revision H:1981 | SYRUP |
| MIL-D-52645 Revision A:1973 | DISTILLATION EQUIPMENT SET, WATER, THERMOCOMPRESSION TYPE, 150 GALLONS PER HOUR, PACKAGING OF |
| MIL-I-25852 Revision B:1981 | INDICATOR, TEMPERATURE, THERMO COUPLE EHU-4/A |
| MIL-M-27274 Revision E:1993 | MASK, OXYGEN MBU-5/P |
| MIL-C-29109 Revision B:1988 | COVERALLS, SUBMARINE DECK EXPOSURE |
| MIL B 82640 : 0 | BOOT ASSEMBLY, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-I-9343 Revision C:1985 | INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ 1 |
| MIL-G-8798 Base Document:1956 | GAGE SYSTEM, FUEL QUANTITY, CAPACITOR TYPE NONVACUUM TUBE, INTEGRALLY LIGHTED GENERAL SPECIFICATION FOR |
| MIL V 8057 : F | VALVE, OXYGEN, PRESSURE BUILDUP AND VENT |
| MIL D 39030 : B | DUMMY LOAD, ELECTRICAL, COAXIAL AND STRIPLINE |
| MIL S 71079 : 0 | SOLENOID VALVE, 3-WAY: 12561784 |
| MIL-M-7405 Revision D:1986 | MAINTENANCE PLATFORM, AIRCRAFT, TYPE B-5A |
| MIL-A-81083 Revision C:1970 | Alternator Rectifier (For Torpedo MK 46 Mods O, 1, 2, and 4) |
| MIL-DTL-25666-3 Base Document:1995 | CONVERTER, LIQUID OXYGEN GCU-10/A |
| MIL-T-85703 Base Document:1984 | TOOL, POWER DRIVE TLU 437/E |
| MIL-C-13766 Revision C:1983 | CONVERSION KIT, BARGE, DECK ENCLOSURE DESIGN 7006, FOR DESIGNS 213A AND 7005 |
| MIL-DTL-85405 Revision A:1997 | TRAILER, MUNITIONS, MHU-185/M |
| MIL-PRF-5480 Revision H:2015 | DATA, ENGINEERING AND TECHNICAL: REPRODUCTION |
| MIL-C-22211 Revision A:1969 | CALIBRATOR SET, RADIO, AN/UDM-1 |
| MIL-I-85487 Base Document:1981 | IGNITER, ROCKET MOTOR, MARK 297 MOD 1 |
| MIL-C-81317 Base Document:1965 | CARTRIDGE, IMPULSE, MARK 97 MOD 0 |
| KKK-R-2800 Base Document:1993 | RAILWAY CAR SPOTTER, SELF-PROPELLED, GED OR DED |
| MIL-P-13822 Base Document:1954 | Polyisobutylene/Oil Gel |
| MIL-DTL-25666-1 Base Document:1971 | Converter, Liquid Oxygen GCU-2A/A |
| TT-N-95 Revision B:1967 | |
| MIL P 28943 : (2) | POWER SUPPLY: DIRECT CURRENT |
| JJ-U-513 Revision D:1975 | UNDERSHIRT, MAN'S, (QUARTER-SLEEVE) |
| MIL-M-2418 Revision G:1990 | MITTEN SHELLS, SNOW CAMOUFLAGE, COTTON, WHITE, TWO FINGER |
| MIL-C-82243 Revision F:1993 | COVERALLS, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
| MIL-F-85731 Base Document:1986 | FASTENER, POSITIVE LOCKING, ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| MIL-B-624 Revision A:1969 | BARIUM CARBONATE [FOR USE IN AMMUNITION] |
| MIL-T-23824 Revision A:1971 | TORPEDO BEACON LIGHT (FOR TORPEDO MARK 37 MODS O, 2 AND 3) |
| MIL-I-81970 Base Document:1974 | IGNITION COMPOUND |
| A-A-50169 Revision B:2011 | Skin Protective Compounds, Chemical Barrier |
| MIL-C-82631 Base Document:1974 | CONNECTOR, CABLE, TUBE DOOR, MK 42 MOD 1 |
| MIL-C-51230 Base Document:1968 | COLLECTIVE PROTECTION EQUIPMENT, CBR, BATTERY CONTROL CENTRAL, M10 |
| MIL C 82922 : 1994 | CARTRIDGE, IMPULSE, CCU-123/E (EARTH ANCHOR CARTRIDGE) |
| MIL-E-12397 Revision B:1954 | ERASER, RUBBER-PUMICE (FOR TESTING COATED OPTICAL ELEMENTS) |
| GGG-K-481 Revision D:1995 | KNIFES; CRAFTSMAN'S, (HAWKBILL, SHOE, CHIPPING) PUTTY AND SCRAPING |
| MIL-G-19027 Revision D:1966 | GYRO, STEERING (FOR TORPEDO MARK 37 MODS O, 2, 3) |
| MIL-N-8550 Base Document:1953 | NICKEL, ALLOY, BARS AND FORGINGS 1,200 DEG TO 1,500 DEG F OPERATING TEMPERATURES |
| MIL-C-18556 Base Document:1955 | CALIBRATOR, MAGNETIC, TS-85/ASQ |
| MIL-F-24259 Revision A:1987 | FLUID FLOWMETER, VOLUME VELOCITY TYPE |
| MIL-H-9890 Revision E:1988 | HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS |
| MIL-B-43716 Revision B:1985 | BAGS, PLASTIC, PROTECTIVE (GARMENT) |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| SAE AS 1933 : 2013 | AGE CONTROLS FOR HOSE CONTAINING AGE-SENSITIVE ELASTOMERIC MATERIAL |
| MIL-B-16540 Revision B:1969 | BRONZE, PHOSPHOR: CASTINGS |
| MIL-V-31001 Base Document:1992 | VEST, AMMUNITION CARRYING |
| MIL-S-63383 Base Document:1980 | SAFE AND ARMING (NON-HAZARDOUS) ASSEMBLY M718/M741 |
| MIL W 22176 : A NOTICE 1 | WATCH, WRIST, SUBMERSIBLE (4OO-FOOT), NON-MAGNETIC |
| MIL-C-9897 Revision C:1992 | CRATE, SLOTTED ANGLE, STEEL OR ALUMINUM FOR LIGHTWEIGHT AIRFRAME COMPONENTS AND BULKY ITEMS [FOR MAXIMUM LOADS OF 3000 POUNDS] |
| MIL T 5350 : E | TRANSMITTER, SYNCHRO OPERATED, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-J-87035 Revision D:1994 | JUMPER, MAN'S (BLUE, DRESS) |
| MIL-N-37529 Base Document:1977 | NYSTATIN OINTMENT USP |
| MIL-M-85522 Revision A:1991 | MONITOR, OXYGEN CRU-91/A |
| MIL-DTL-32185 Base Document:2005 | TROUSERS, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| MIL H 6000 : B | HOSE, RUBBER [FUEL, OIL, COOLANT, WATER AND ALCOHOL] |
| MIL-S-9487 Revision C:1985 | SWITCH, TRIGGER, SINGLE POLE, TWO STAGE, MOMENTARY |
| MIL T 55686 : NOTICE 1 | TRANSIT FRAME, ANTENNA MT-3894()/TRC & MT-3895()/TRC |
| MIL V 87223 : 0 | VALVE, PRESSURE, ANTI-G SUIT, MXU-804/A AND MXU-805/A |
| MIL J 29451 : A | JACKET, MEN'S; INTERMEDIATE WEIGHT, POLYESTER/WOOL |
| MIL-C-85253 Base Document:1981 | CODE DETONATING |
| MIL-P-44260 Revision B:1990 | PEAS AND MUSHROOMS, THERMOSTABILIZED, TRAY PACK |
| MIL-C-85518 Base Document:1984 | COMPUTER SET, STANDARD AIRBORNE AN/AYK-14(V) GENERAL SPECIFICATION FOR |
| MIL C 82884 : 1993 | CARTRIDGE, IMPULSE CCU-69A/A |
| MIL-G-52858 Revision A:1975 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 30 KW, 50/60 HERTZ, PU-406B/M |
| MIL-B-37067 Base Document:1974 | BLOCK, INSECT FIXATION, DOUBLE MOUNTED, 100S |
| MIL-B-12233 Revision E:1986 | BAGS, SAND, BURLAP & COTTON |
| MIL S 51200 : A | SAMPLING KIT, CBR AGENT, M34 |
| MIL-C-37590 Base Document:1977 | COLISTIN SULFATE, HYDROCORTISONE, ACETATE, NEOMYCIN SULFATE AND THONZONIUM BROMIDE SUSPENSION OTIC |
| MIL-T-87020 Revision B:1987 | TROUSERS, DISPOSABLE |
| ASTM A 159 : 1983 : R2001 | Standard Specification for Automotive Gray Iron Castings |
| MIL-A-46864 Revision B:1991 | ADHESIVE, EPOXY, MODIFIED, FLEXIBLE, TWO COMPONENT |
| MIL-U-36112 Revision A:1972 | UREASE TEST BROTH, DEHYDRATED |
| MIL-B-52489 Revision E:1987 | BARBED TAPE, CONCERTINA |
| MIL-F-85596 Base Document:1983 | FIN, RETARDER, AIR INFLATABLE BSU-85/B |
| NNN-S-1356 Revision B:1978 | SPATULA LABORATORY (METAL BLADE) |
| MIL-A-82843 Base Document:1990 | ADHESIVE, ELEVATED TEMPERATURE CURING |
| MIL-B-45993 Revision A:1989 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE AIR OR AIR OVER HYDRAULIC OPERATED |
| GG-C-576 Revision B:1957 | CONES AND WHEELS; FELT, DENTAL GRINDING AND POLISHING MACHINE |
| MIL P 26536 : D | PROPELLANT, HYDRAZINE |
| MIL-R-19750 Revision A:1958 | REGULATOR; VOLTAGE, 28 V, 120 DEGREE C, FOR 30 V DIRECT-CURRENT GENERATOR, GENERAL SPECIFICATION FOR |
| GG-S-00812 Revision C:1965 | SUTURES, ABSORBABLE, SURGICAL (GUT) |
| MIL P 19834 : B | PLATE, IDENTIFICATION, METAL FOIL, ADHESIVE BACKED |
| MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
| MIL-A-43759 Revision A:1981 | ADAPTERS, AIR LOCK, MUST |
| MIL T 82839 : NOTICE 1 | TAPE, CARBON CLOTH, PHENOLIC PREIMPREGNATED |
| MIL M 37373 : 0 | METHYLPREDNISOLONE SODIUM SUCCINATE FOR INJECTION USP |
| SAE AS6011 : 1999 | CYLINDERS, CARBON DIOXIDE FILLED, TECHNICAL |
| DD-M-411 Revision C:1990 | |
| ASTM A 184/A184M : 2017 : REDLINE | Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement |
| SAE AS 4251 : 2013 | COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, SELF-ALIGNING, SELF-SEALING DISCONNECTS |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| ASTM A 47/A47M : 1999 : R2014 | Standard Specification for Ferritic Malleable Iron Castings |
| MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
| MIL-M-37672 Base Document:1977 | METHYLPHENIDATE HYDROCHLORIDE TABLETS, USP |
| MIL-B-37799 Base Document:1977 | BENZOYL PEROXIDE GEL, USP |
| MIL-T-37652 Revision A:1977 | TOLNAFTATE CREAM, USP |
| MIL-S-25093 Revision B:1963 | SEA RESCUE KITS, DROPPABLE |
| MIL-S-43926 Revision J:1991 | Suit, Chemical Protective (No S/S Document) |
| MIL C 13273 : 0 | CORD, ELECTRICAL (RETRACTILE, 2, 3, AND 4 CONDUCTOR, WD-9/U, WT-2/U, WF-4/U) |
| MIL-P-10388 Revision H:1990 | PIPE FITTING, ONE OR MORE ENDS GROOVED |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN, 6061, AIRCRAFT HYDRAULIC QUALITY |
| L-P-513 Revision C:1968 | PLASTIC SHEET AND INSULATION SHEET, ELECTRICAL (LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN) |
| HH-I-435 Revision B:1977 | INSULATORS, ELECTRIC, PORCELAIN AND GLASS |
| MIL-A-45059 Revision C:1983 | ADHESIVE FOR BONDING CHIPBOARD TO TERNPLATE, TINPLATE, AND ZINCPLATE |
| G-D-331 Revision D:1974 | DICTIONARIES, ENGLISH |
| MIL-P-46987 Revision B:1965 | PROJECTILE, 8-INCH, CHEMICAL AGENT, VX, M426, WITHOUT FUZE AND BURSTER; FILLING OF |
| MIL-A-81335 Base Document:1965 | ALUMINUM POWDER, SPHERICAL |
| MIL-STD-1169 Revision B:1987 | PACKAGING PACKING AND MARKING FOR SHIPMENT OF INERT AMMUNITION COMPONENTS |
| MIL-A-81236 Base Document:1965 | ADHESIVE; EPOXY RESIN WITH POLYAMIDE CURING AGENT |
| MIL-M-26075 Revision D:1969 | MAGNESIUM-ALLOY SHEET AND PLATE (HK31A) |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| MIL-B-21465 Revision A:1994 | BUTYL STEARATE, NORMAL |
| MIL-L-28796 Base Document:1973 | LINE ASSEMBLIES, RADIO FREQUENCY TRANSMISSION GENERAL SPECIFICATION FOR |
| ASTM F 781 : 1995 | Standard Specification for Perfluoro (Alkoxyalkane) Copolymer (PFA) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
| ASTM C 746 : 1990 : R2003 : EDT 1 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| MIL S 14977 : B | SQUIB, MARK 1 MOD 0 FOR 2.75 INCH ROCKET |
| MIL-B-29186 Base Document:1978 | BARRIER SYSTEM: FLOATING, OIL AND DEBRIS CONTAINMENT (FOR PERMANENT INSTALLATION) |
| MIL-I-27304 Revision E:1977 | INDICATOR, RATE OF FLOW |
| MIL-M-46143 Base Document:1988 | MAGNESIUM LITHIUM ALLOY CASTINGS (LS141A AND LZ145A) |
| MIL-P-20689 Revision D:1988 | PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS) |
| FF-P-386 Revision D:1971 | PIN, COTTER (SPLIT) |
| MIL-F-37418 Revision A:1977 | FLURANDRENOLIDE LOTION USP |
| MIL-T-37844 Base Document:1977 | TOLNAFTATE POWDER |
| MIL-R-52224 Revision D:1992 | RETAINER ASSEMBLY SLIDING |
| A-A-2770 Base Document:1992 | PENCIL, COPYING |
| FF-P-101 Revision F:1984 | PADLOCK |
| MIL-G-52927 Revision A:1985 | GENERATOR SETS, GASOLINE ENGINE, TRAILER MOUNTED 3 KW, 28 VOLT DC, PU-666/G |
| MIL-U-37647 Base Document:1978 | URINE SUGAR TEST TABLETS |
| QQ-M-38 Revision B:1969 | MAGNESIUM ALLOY DIE CASTINGS (AZ91A) |
| MIL-S-4461 Revision H:1974 | SEALING MACHINES, HEAT, HOT JAW AND CONTINUOUS |
| MIL C 24643 : A | CABLES AND CORDS ELECTRIC, LOW SMOKE FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| MIL H 45444 : B (4) | |
| MIL-B-3434 Revision C:1981 | BEATER, FOREST FIRE |
| MIL P 85759 : 0 | PROPELLANT GRAIN, MARK 93 MOD O |
| MIL-P-18920 Revision B:1981 | PRIMER, ELECTRIC, MK 42 MODS 0, 1 & 2 |
| MIL-P-18716 Revision C:1991 | Primer, Electric, Mark 48 MOD 2 |
| MIL-DTL-3962 Revision F:2015 | ANCHORS, GROUND, ARROWHEAD WITH DRIVING EQUIPMENT |
| MIL S 51028 : B | SAMPLING AND GAGING KIT, PETROLEUM: PORTABLE |
| MIL-L-52430 Revision C:1991 | LIGHT, SIGNAL, SURVEYING 2 INCH & 5 INCH REFLECTORS, BATTERY POWERED WITH CASES |
| MIL-PRF-23199 Revision E:1997 | PACKAGING AND PACKING REQUIREMENTS FOR SPECIAL PURPOSE MECHANICAL COMPONENTS AND REPAIRS PARTS |
| MIL-DTL-32265 Base Document:2007 | Folded Fiberglass Mat Fabrication and Packaging |
| MIL-DTL-32184 Base Document:2005 | PARKA, COLD WEATHER, UNIVERSAL CAMOUFLAGE |
| DOD I 24688 : 0 | INSULATION PANEL, THERMAL AND ACOUSTIC ABSORPTIVE, OPEN-CELL POLYIMIDE FOAM |
| MIL B 8565 : J | BATTERY AND CELL, STORAGE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-B-153 Revision A:1964 | BARIUM PEROXIDE |
| MIL-C-14385 Revision D:1991 | CANNON, 40 MM DUAL AUTOMATIC GUN: M2A1 AND CLIP, CHARGER: M3 |
| MIL P 211 : E | PHOSPHORUS, RED, TECHNICAL |
| MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
| MIL-S-52561 Revision A:1972 | SUPPLEMENTARY EQUIPMENT SET, TOPOGRAPHIC PHOTOMAPPING, PACKAGING OF |
| MIL-T-21704 Revision F:1987 | TROUSERS, COLD WEATHER |
| MIL-S-18471 Revision G:1983 | System, Aircrew Automated Escape, Ejection Seat Type, General Specification For |
| MIL-C-29380 Revision D:1990 | COAT, ALL WEATHER, MEN'S |
| MIL-C-51264 Revision A:1983 | CUPROUS CYANIDE, TECHNICAL |
| MIL-S-14022 Revision A:1983 | SODIUM PERBORATE, TETRAHYDRATE |
| MIL-V-5461 Revision C:1977 | VALVE, VACUUM BREAKING |
| MIL-C-81946 Base Document:1973 | COATING SYSTEM, THERMAL INSULATION, INTUMESCENT |
| MIL-P-24364 Base Document:1969 | PLASTIC SHEET, LAMINATED, THERMOSETTING, ELECTRICAL INSULATING SHEET, GLASS MAT |
| SS-S-210 Revision A:1975 | SEALING COMPOUND, PREFORMED PLASTIC FOR EXPANSION JOINTS & PIPE JOINTS |
| MIL-X-37393 Base Document:1976 | XYLOMETAZOLINE HYDROCHLORIDE SOLUTION, NF |
| MIL-H-37820 Base Document:1978 | |
| MIL-S-37663 Base Document:1977 | SACCHARIN SODIUM TABLETS, NF |
| MIL-N-37288 Revision A:1976 | NEOMYCIN SULFATE, GRAMICIDIN, AND POLYMYXIN B SULFATE CREAM |
| MIL-W-37604 Base Document:1976 | WRIGHT S STAIN |
| MIL C 51263 : 0 | CHROMIC NITRATE, NONAHYDRATE, ANALYZED REAGENT |
| MIL T 21911 : 0 | TELESCOPE MARK 115 MOD O |
| GGG-D-751 Revision D:1989 | DRILLS, TWIST (TAPER-SQUARE, STRAIGHT, AND TAPER-ROUND SHANKS) |
| MIL-T-7771 Revision B:1980 | TUBE, EXTENSION, GYRO STABILIZED DRIFT METER |
| MIL-F-3222 Revision F:1991 | FLOODLIGHTS AND LANTERNS, PACKAGING OF |
| MIL-C-24935 Base Document:1988 | Coveralls, Firemen\'s (No S/S Document) |
| MIL-T-37619 Revision A:1977 | TRIMETHOPRIM AND SULFAMETHOXAZOLE TABLETS |
| MIL-R-16417 Revision J:1986 | REPAIR KIT, CO2, INFLATABLE LIFE PRESERVERS |
| MIL-S-12514 Revision C:1974 | STARTER, MOTOR, ACROSS THE LINE AND REDUCED VOLTAGE TYPES, AC INDUCTION, 3/4 TO 100 HP MANUAL AND ELECTRIC |
| MIL-C-29404 Revision B:1992 | CLOTH, TROPICAL: POLYESTER & WOOL (KHAKI M-1) |
| MIL C 85629 : A (1) | CONTROL MONITOR SET GUIDED WEAPON, AN/AWW-13 |
| GGG-R-00620 Base Document:1965 | ROLLER, HAND (RUBBER ROLLER) |
| MIL-B-81820 Revision F:1994 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL A 12067 : B | ANALYZER, SPECTRUM TS-723( )/U |
| MIL-S-24950 Base Document:1989 | SHIRT, MANS, DRESS WHITE, LONG SLEEVE |
| MIL-R-43518 Revision C:1988 | RAINCOAT, MAN'S, QUARPEL |
| MIL-P-46111 Revision C:1978 | PLASTIC FOAM, POLYURETHANE (FOR USE IN AIRCRAFT) |
| G-M-656 Revision A:1958 | MOUNTS, RADIOGRAPHIC FILM, DENTAL |
| MIL-G-52636 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-625/G |
| MIL-B-1563 Revision C:1990 | BUTTONS, INSIGNIA AND FINDINGS (U.S.M.A.), GENERAL SPECIFICATION FOR |
| MIL-C-1029 Revision E:1973 | COOKIES, OATMEAL WITH CHOCOLATE CHIPS AND SANDWICH: CANNED |
| MIL T 5882 : D | TRANSMITTER, PRESSURE, MULTIPURPOSE, 0-50 PSI, MS28005-1 |
| MIL-P-3584 Revision A:1963 | PLASTIC SHEET, POLYVINYL CHLORIDE, PLASTICIZED, ELASTOMERIC |
| MIL-T-37138 Base Document:1975 | TRIPROLIDINE HYDROCHLORIDE AND PSEUDOEPHEDRINE HYDROCHLORIDE TABLETS |
| MIL-I-81454 Base Document:1967 | INDICATOR, GYROSCOPE, VERTICAL REFERENCE ID-1481 (*)/A |
| MIL-I-46852 Revision C:1991 | INSULATION TAPE, ELECTRICAL, SELF ADHERING UNSUPPORTED SILICONE RUBBER |
| MIL-B-12504 Revision E:1987 | BAR, METAL AND WIRE (NONELECTRICAL), CARBON AND ALLOY STEEL, COLD DRAWN FOR AP BULLET CORES AND SHOT |
| MIL-F-36690 Revision A:1972 | FOLIC ACID TABLETS, USP |
| MIL-C-37264 Revision A:1976 | CALCIUM LACTATE TABLETS USP |
| MIL C 24671 : B | CLOTH, LINT-FREE, FLUSHING AND CLEANING |
| MIL-T-37596 Base Document:1976 | TEST STRIPS AND COLOR CHART, URINARY BILIRUBIN, BLOOD, GLUCOSE, KETONE, NITRITE PH PROTEIN AND UROBILINOGEN |
| MIL-H-0037210 Revision A:1976 | HAEMORRHOIDAL SUPPOSITORIES |
| MIL-A-47073 Base Document:1974 | ADHESIVE, PLASTIC RESIN |
| MIL-D-37356 Base Document:1976 | DOXEPIN HYDROCHLORIDE CAPSULES |
| MIL-N-37507 Base Document:1977 | NYSTATIN, GRAMICIDIN, NEOMYCIN SULFATE, AND TRIAMCINOLONE ACETONIDE CREAM |
| MIL O 0037492 : A | ORPHENADRINE CITRATE, ASPIRIN, CAFFEINE, AND PHENACETIN TABLETS |
| MIL P 37147 : B | PENTAZOCINE HYDROCHLORIDE TABLETS,NF |
| HH-M-622 Revision D:1977 | MORTAR, REFRACTORY: HEAT SETTING AND AIR SETTING, BONDING (WET AND DRY TYPES) |
| MIL-D-37620 Base Document:1977 | DEXAMETHASONE TABLETS, USP |
| MIL-T-37627 Base Document:1978 | TRIETHANOLAMINE POLYPEPTIDE OLEATE-CONDENSATE SOLUTION |
| MIL-P-37723 Base Document:1978 | PHENOBARBITAL TABLETS, USP |
| MIL-P-37197 Base Document:1975 | PAD, TRETINOIN SOLUTION IMPREGNATED, RAYON |
| MIL-STD-1547 Revision B:1992 | ELECTRONIC PARTS, MATERIALS, AND PROCESSES FOR SPACE VEHICLES |
| MIL-M-55660 Base Document:1969 | MODULE, IMAGE INTENSIFIER 18 MILLIMETER, TYPE 8857 |
| MIL-D-52634 Revision C:1985 | DETECTING SET MINE, PORTABLE, METALLIC AND NONMETALLIC AN/PRS-7 |
| MIL-I-26382 Revision C:1994 | INDICATOR SET, LIQUID OXYGEN QUANTITY A/A24J-4 AND A/A24J-8 |
| DDD-P-351 Revision H:1978 | PILLOWCASE, COTTON AND POLYESTER/COTTON |
| MIL-E-43749 Revision G:1993 | ESCALLOPED POTATOES WITH PORT, DEHYDRATED, COOKED |
| MIL-D-51048 Revision F:1976 | DECONTAMINATING APPARATUS, PORTABLE, DS2, 1-1/2 QUART, M11 |
| MIL D 23607 : B | DISCONNECT SWITCHES, AIR OUTDOOR (7.2 KV TO 34.5 KV) |
| MIL-A-22336 Revision B:1979 | AMPLIFIER, SYNCHRO SERVO, 6 WATT, 6O HZ |
| MIL-C-12044 Revision D:1975 | CHESTS, PLYWOOD |
| MIL-B-44078 Revision A:1983 | BEEF PATTIES, PRECOOKED, DEHYDRATED, FOR MEAL, READY-TO-EAT |
| DD-P-00355 Revision A:1975 | PIPET, DROPPING, GLASS OR PLASTIC |
| MIL-W-51114 Revision A:1976 | WATER TESTING KIT, CHEMICAL AGENTS, AN M-2 |
| MIL L 15098 : D | LAMP, GLOW |
| GG-P-181 Revision C:1963 | PENHOLDERS (WRITING) |
| MIL-PRF-900 Revision F:1973 | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-S-10145 Revision D:1965 | SKETCHMASTER, VERTICAL, WITH CASE |
| MIL-I-36698 Revision A:1975 | IMMERSION OIL, MICROSCOPY |
| MIL-M-50023 Base Document:1959 | MASK, PROTECTIVE, CD V-805 |
| MIL-F-19922 Base Document:1958 | FLUXES, WELDING (COMPOSITIONS), SUBMERGED ARC PROCESS WITH TYPE B ELECTRODES, CARBON AND LOW ALLOY STEEL APPLICATION |
| MIL-M-21039 Revision B:1979 | MAGNIFIER, MEASURING TUBE TYPE, SEVEN POWER AR-60( ) |
| MIL-C-42061 Base Document:1988 | CAP, SCREW, BOTTLE AND JAR |
| MIL-R-43608 Revision A:1981 | RIP CORD, PARACHUTE, PERSONNEL: GENERAL SPECIFICATION FOR |
| MIL-B-43341 Revision B:1975 | BREADBOX, DELIVERY, ALUMINUM |
| MIL-R-37640 Base Document:1977 | RACK, TEST TUBE, LABORATORY, EPOXY COATED WIRE, 40 TUBE |
| MIL-R-37624 Base Document:1977 | RACK, TEST TUBE, LABORATORY, WINTROBE, ENAMELLED STEEL, 10 TUBE |
| MIL-STD-13231 Base Document:1999 | MARKING OF ELECTRONIC ITEMS |
| MIL-T-60246 Base Document:1965 | THRUSTER, CARTRIDGE ACTUATED, M18 ASSEMBLY |
| L-P-391 Revision D:1975 | PLASTIC SHEETS, RODS AND TUBING, RIGID CAST, METHACRYLATE (MULTIAPPLICATIONS) |
| MIL-T-13025 Revision C:1966 | THICKENER, INCENDIARY OIL, M2 |
| L-P-1183 Revision B:1977 | PLASTIC MOLDING MATERIAL, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), RIGID |
| MIL-C-17208 Revision B:1976 | CLOTH, PARACHUTE, 240-PERMEABILITY; FOR USE WITH UNDERWATER ORDNANCE |
| MIL-L-51050 Revision B:1971 | LABORATORY, PETROLEUM,SEMITRAILER MOUNTED |
| SAE AMS G 25871 : 2016 | GLASS, LAMINATED, AIRCRAFT GLAZING |
| ASTM E 454 :2012 | Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) |
| MIL-J-82154 Revision B:1984 | JACKET, MAN S MESS, WHITE (OFFICER S) |
| MIL-T-52296 Revision D:1983 | TRANSOM ASSEMBLY, 60 TON UNIVERSAL TRANSOM |
| MIL-C-28688 Base Document:1990 | CABLE, FIBER OPTIC, PACKAGING OF |
| MIL C 9401 : B | CANOPY, PARACHUTE, RING SLOT, GENERAL SPECIFICATION FOR CONSTRUCTION OF 0ASG] |
| AA-F-001873 Revision A:1977 | FURNITURE, CONTEMPORARY, OAK (GENERAL SPECIFICATION) |
| MIL-B-37829 Base Document:1978 | BAG, PERSONAL EFFECTS |
| SAE J 1776 : 2014 | MARINE VEHICLES - HYDRAULIC SYSTEM PUMPS AND MOTORS - DESIGN AND SPECIFICATION GUIDE |
| MIL C 85045 : E | CABLES, FIBER OPTICS, (METRIC), GENERAL SPECIFICATION FOR |
| WW-T-825 Revision B:1971 | TUBE, MAGNESIUM-ALLOY, EXTRUDED |
| MIL-F-37390 Base Document:1976 | FLURANDRENOLIDE TAPE USP |
| MIL-B-37798 Base Document:1978 | BENZOIN TINCTURE, COMPOUND, USP |
| MIL-T-43512 Revision B:1970 | TENTS, MISSILE SYSTEM EQUIPMENT CONSOLE, (HIGH-POWER ILLUMINATOR HAWK) |
| MIL-A-52873 Base Document:1975 | ALARM SET, ANTI-INTRUSION (PSID) AN/GSG-151 |
| SAE AMS R 7362 : 2012 | NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
| MIL A 8416 : B | ADAPTER, HEADSET-MICROPHONE MX-1646()/AIC |
| MIL-DTL-27536 Revision C:1995 | COUPLING, CLAMP, GROOVED, V-BAND |
| MIL-T-18232 Revision B:1968 | TARGET, AERIAL, POWERED, DESIGN AND CONSTRUCTION OF GENERAL SPECIFICATION FOR |
| MIL M 81930 : A | MANUAL, TECHNICAL, 16MM, SILVER HALIDE MICROFILM, REQUIREMENTS FOR |
| MIL A 52242 : A | ALUMINUM ALLOY EXTRUDED ROD, BAR, AND SHAPES, 7001 |
| MIL-C-14500 Revision C:1985 | CRADLE, BOAT, STEEL |
| MIL-S-24584 Base Document:1978 | STOPPERS, CARPENTER AND ASSOCIATED BRIDLES (WIRE ROPE AND CHAIN LINK) |
| MIL R 52105 : D | RAMP, RAFT |
| MIL-P-50202 Revision A:1977 | PROPELLANT CHARGE, ROCKET, FOR DEMOLITION KIT, CRATERING, M180 |
| MIL-A-28988 Revision B:1982 | AMPLIFIER, RADIO FREQUENCY, AM-6545/GRC-193 |
| MIL E 55585 : F | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-B-467 Revision E:1988 | BREAKER, PAVING: PNEUMATIC |
| MIL C 37753 : A | CHLORPHENIRAMINE MALEATE, ASPIRIN, CAFFEINE, AND PHENYLPROPANOLAMINE HYDROCHLORIDE TABLETS |
| MIL H 8795 : D | HOSE ASSEMBLY, RUBBER HYDRAULIC, FUEL AND OIL RESISTANT |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL-E-36875 Revision A:1975 | ETHYNODIOL DIACETATE AND ETHINYL ESTRADIOL TABLETS, U.S.P. |
| MIL U 46045 : D | URANIUM ALLOY, WROUGHT, BARS, BILLETS, AND TUBULAR SHAPES |
| MIL R 85769 : 1986 | ROCKET MOTOR, MK 117 MOD O |
| MIL-F-37307 Base Document:1975 | FLUOCINOLONE ACETONIDE CREAM, USP |
| MIL-G-52880 Revision A:1983 | GENERATOR SET, DIESEL ENGINE, 500 KW 50/60 HERTZ, TACTICAL UTILITY |
| MIL-A-37736 Base Document:1978 | ALUMINUM ACETATE AND ACETIC ACID SOLUTION |
| MIL-N-37516 Base Document:1976 | NITROFURANTOIN CAPSULES, MICROCRYSTAL |
| MIL N 37481 : NOTICE 2 | NEOMYCIN SULFATE, HYDROCORTISONE, AND POLYMYXIN B SULFATE SOLUTION OTIC |
| MIL I 5184 : B | INDICATOR, POSITION |
| MIL-L-37780 Base Document:1978 | LYPRESSIN SOLUTION |
| MIL-A-37289 Base Document:1989 | ACETAMINOPHEN ELIXIR, U.S.P. |
| MIL D 11318 : A | |
| MIL-D-37650 Base Document:1976 | DICLOXACILLIN SODIUM CAPSULES USP |
| MIL-C-37444 Revision A:1977 | CHLORPHENIRAMINE MALEATE SYRUP USP |
| MIL-C-37305 Revision A:1976 | COCAINE HYDROCHLORIDE USP |
| MIL-P-83348 Revision A:1983 | POWDER, PLASMA SPRAY |
| MIL D 37671 : NOTICE 2 | DIENESTROL CREAM, NF |
| MIL P 37146 : 0 | PROPOXYPHENE NAPSYLATE AND ASPIRIN TABLETS |
| MIL C 22653 : C | CARTRIDGE, IMPULSE, MARK 19 MOD O |
| DDD-A-1466 Revision C:1991 | APRON, CONSTRUCTION WORKER'S |
| MIL-D-8804 Revision B:1993 | DE-ICING SYSTEM, PNEUMATIC BOOT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-P-85856 Base Document:1988 | POWDER MATERIALS FOR FLAME AND PLASMA SPRAYED COATINGS GENERAL SPECIFICATION FOR |
| MIL-C-7474 Revision E:1978 | CASTER, INDUSTRIAL |
| MIL-D-20550 Revision B:1968 | DIATOMACEOUS EARTH |
| MIL-R-22307 Revision D:1972 | RADIAC SET AN/PDR-43() |
| MIL I 85760 : 0 | IGNITER, MK 304 MOD O |
| MIL-C-82733 Revision A:1988 | CARTRIDGE, IMPULSE, CCU-22/A/A ASSEMBLY |
| MIL-C-1470 Revision F:1972 | CEREALS, BREAKFAST, PREPARED (RTE) AND UNCOOKED: PACKAGING, PACKING, LABELING, AND MARKING OF |
| MIL-PRF-53051 Revision C:2017 | PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
| MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
| MIL-T-87001 Base Document:1975 | TOPCOAT, MAN'S, POLYESTER/WOOL, ELASTIQUE (COAST GUARD) |
| MIL-STD-483 Revision A:1985 | CONFIGURATION MANAGEMENT PRACTICES FOR SYSTEMS, EQUIPMENT, MUNITIONS, AND COMPUTER PROGRAMS |
| MIL-B-13265 Revision C:1985 | BRIDGES, FIXED, STEEL, RAILWAY, UNIT CONSTRUCTION, 70-FT., 2-GIRDER SPAN: AND CONVERSION SETS: COMPONENTS OF |
| MIL-I-49466 Base Document:1990 | INSULATOR; DISKS, PLATES & WASHERS GENERAL SPECIFICATION FOR |
| MIL-S-20386 Revision D:1977 | STEREOMETER, PHOTOGRAMMETRIC; STEREOCOMPARAGRAPH-TYPE; WITH ACCESSORIES AND CASE |
| MIL-A-45016 Revision C:1985 | ALIGNMENT SERVICE UNIT MOTOR VEHICLE WITH FRAME STRAIGHTENING AND ALIGNMENT CAPABILITIES |
| FF-O-605 Revision B:1973 | OPENER, CAN, HAND (DISPOSABLE, COMBINATION OPENER AND PUNCH) |
| MIL-M-22387 Base Document:1964 | MOTOR, ALTERNATING CURRENT |
| MIL-STD-1359 Revision B:1987 | CLEANING METHODS AND PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
| MIL-A-37382 Base Document:1975 | APPLICATOR, DISPOSABLE, POVIDONE-IODINE IMPREGNATED |
| MIL-V-82443 Base Document:1966 | VALVE, FUEL SHUT OFF |
| MIL-T-81521 Revision A:1969 | TAPE, TEXTILE, NYLON, LANDBASED ARRESTING GEAR, 7 INCH |
| MIL T 52777 : A NOTICE 1 | TANK, STORAGE, UNDERGROUND, GLASS FIBER REINFORCED PLASTIC |
| MIL-G-36752 Revision A:1975 | GAGE, FOOD BLEMISH, VETERINARY |
| MIL-H-22995 Revision A:1969 | HELMET SHELL ASSEMBLIES, PILOT S PROTECTIVE, APH-6 SERIES |
| MIL-T-36349 Revision A:1978 | THERMOMETER,SELF-INDICATING, BIMETALLIC DIAL 8 1/2 INCH |
| MIL-P-70343 Base Document:1990 | PACKING, FIBERGLASS, ROPE & WICK |
| MIL M 5755 : C | MIRROR, REARVIEW, NONMAGNETIC, GENERAL REQUIREMENTS FOR [FOR AERONAUTICAL USE] |
| MIL-C-55169 Base Document:1962 | CONNECTORS, ELECTRIC, TYPE "Q", MULTI-CONTACT |
| MIL-F-52569 Revision C:1992 | FOOTWALK ASSEMBLY, ALUMINUM FOR BRIDGE BAILEY |
| MIL-J-43923 Revision C:1990 | Jacket, Flyer\'s, Lightweight, (Expandable Wrists and Waist) (No S/S Document) |
| FF C 00431 : B | CLIP, PAPER (BINDER) |
| MIL-L-17507 Revision F:1978 | LACE, ORNAMENTAL |
| MIL-PRF-2697 Revision A:1960 | GLASS, PORTLIGHT, CIRCULAR, HEAT TREATED |
| MIL-T-3901 Revision E:1981 | TROUSERS, FIREMENS |
| MIL-S-82562 Base Document:1968 | SENSING CIRCUIT ASSEMBLY LD546972 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MK 444 MOD O) |
| MIL-A-35040 Revision A:1964 | ALMOND PASTE |
| MIL-G-24934 Base Document:1988 | GLOVES, FIREMEN'S |
| MIL-B-8942 Revision A:1965 | Bearings, Plain, TFE Lined, Self-Aligning |
| MIL-I-25863 Revision D:1990 | INDICATOR, ELECTRICAL TACHOMETER 0-110 PERCENT RPM, 2-INCH SIZE, INTEGRALLY LIGHTED |
| MIL L 49157 : A | LENS ASSEMBLY, OBJECTIVE FOR NIGHT VISION GOGGLES, AN/PVS-5A |
| MIL-V-8712 Revision A:1965 | VALVE, AIR RELIEF, LOW PRESSURE |
| MIL-A-49382 Base Document:1980 | AFOCAL ASSEMBLY, AN/VSG-2 |
| MIL A 5815 : E | ANTENNA, AIRBORNE, UHF - BAND GENERAL SPECIFICATION FOR |
| MIL C 51362 : 0 | CANISTER, COLOR SMOKE, 105MM, SHELL, M2, COMPONENTS FOR |
| MIL-L-52696 Base Document:1970 | LAMINATING RESIN |
| MIL-A-41829 Revision D:1989 | APRON, UTILITY, IMPERMEABLE, RUBBER COATED FABRIC (GENERAL PURPOSE) |
| MIL-C-7078 Revision C:1971 | CABLE, ELECTRIC, AEROSPACE VEHICLE, GENERAL SPECIFICATION FOR |
| NNN-B-585 Revision B:1979 | BOX MICROSCOPE SLIDE PLASTIC |
| MIL-C-37099 Base Document:1975 | CENTRIFUGE, LABORATORY, HAND FELD |
| A-A-2762 Base Document:1992 | TYPING ELEMENT (DAISY WHEEL, DISK TYPE) |
| PPP-C-1842 Revision B:1992 | CUSHIONING MATERIAL, PLASTIC, OPEN CELL (FOR PACKAGING APPLICATIONS) |
| MIL C 55422 : 0 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATIONS FOR |
| AA-B-2825 Base Document:1994 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS SINGLE AND DOUBLE-DECK |
| MIL-C-51329 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M11 |
| MIL-C-55172 Revision B:1972 | CABINET, ELECTRICAL EQUIPMENT, CY-3397 ( ) /G |
| MIL-H-49225 Base Document:1980 | HEADSET MICROPHONE KIT MK-896A/AIC (COMPONENTS OF) |
| MIL-P-21769 Revision A:1969 | PLUG, FUSIBLE, REFRIGERANT 12 |
| KKK-C-650 Revision E:1985 | CREEPER, MECHANIC'S |
| NNN R 560 : A | ROD STIRRING LABORATORY |
| FF-P-416 Revision E:1963 | PIN, SAFETY |
| MIL-B-37959 Base Document:1984 | BURS, SURGICAL, TUNGSTEN CARBIDE, (GENERAL REQUIREMENTS FOR) |
| L B 00565 : A | BOX, INDEX CARD, PLASTIC |
| NNN G 698 : C | GRID WIRE GAUZE LABORATORY |
| MIL-F-82566 Base Document:1968 | FIRE CONTROL ASSEMBLY LD546992 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL-B-43254 Revision B:1970 | BRUSH, ANIMAL GROOMING |
| MIL-B-44381 Base Document:1990 | BOARD, MAP, COMPLEXING (SICPS) |
| MIL S 29175 : 0 | SWITCH, THERMOSTATIC, LOW VOLTAGE, NON-(SETBACK/SETUP) AND SETBACK/SETUP, TEMPERATURE LIMITING: HEATING, COOLING, AND HEATING-COOLING |
| MIL R 37208 : 0 | RACK, TEST TUBE LABORATORY |
| MIL H 7750 : B | HOUSING, PARACHUTE RIPCORD |
| GGG-T-0030 Base Document:1965 | TACKER, STAPLE (COMPRESSION TYPE, MANUALLY OPERATED FOR ROUND CROWNED STAPLES) AND STAPLE, TACKER (ROUND CROWNED) |
| MIL W 28839 : 0 | WAVEGUIDE, ELLIPTICAL GENERAL SPECIFICATION FOR |
| GG O 00588 : C | OPENER, LETTER, HAND, METAL |
| P-C-433 Revision B:1976 | CLEANING COMPOUND, ALKALI, PIPELINE |
| MIL-T-50009 Revision A:1960 | THICKENER, INCENDIARY OIL, M4 |
| MIL-R-24086 Revision B:1972 | RADIAC SET AN PDR 45 |
| MIL-T-83727 Base Document:1969 | TRANSOLVER, GENERAL SPECIFICATION FOR |
| MIL-I-7063 Revision B:1979 | INDICATOR, POSITION, RUBBER TRIM TAB |
| MIL-S-28738 Revision C:1975 | SWITCHING GROUP, RF, AN/UPA-61 |
| MIL-G-45279 Base Document:1975 | GYRO, DIRECTIONAL CN-998( )/ASN-43 |
| HH-I-521 Revision F:1980 | INSULATION BLANKETS, THERMAL (MINERAL FIBER, FOR AMBIENT TEMPERATURES) |
| MIL-T-43618 Revision B:1983 | TAPE, PRESSURE SENSITIVE FOR MENDING NYLON PARACHUTE CANOPIES |
| MIL P 21922 : B | PLASTIC RODS AND TUBES, POLYETHYLENE |
| MIL-B-29605 Base Document:1994 | Body Armor, Soft, Small Arms Protective, PRU-60/P22P-15 |
| MIL-H-43174 Revision C:1983 | Helmet, Parachutists\': Free Fall (No S/S Document) |
| HH-I-553 Revision C:1975 | INSULATION TAPE, ELECTRICAL, (RUBBER, NATURAL AND SYNTHETIC) |
| JJ-S-750 Revision A:1967 | STRAP, WEBBING |
| FF-B-195 Base Document:1960 | BEARING, SLEEVE, (BRONZE, PLAIN OR FLANGED) |
| GGG-C-00555 Revision B:1966 | COMPRESSOR, PISTON RING, BAND-TYPE |
| MIL-B-52097 Revision B:1992 | BAR, CARRYING, MULTIPLE AND SINGLE M4 BALK |
| GGG-S-00275 Base Document:1965 | SHEARS, BARBERS |
| MIL-I-6533 Revision B:1970 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION TYPE G 10 |
| MIL-R-51198 Base Document:1964 | REPAIR KIT, CBR AGENT SAMPLING & ANALYZING KIT, M32 64 |
| MIL-S-43357 Revision E:1990 | SHIRT, SLEEPING, HEAT RETENTIVE AND MOISTURE RESISTANT, NYLON/ACETATE, TRICOT KNIT |
| MIL-B-23071:C | Blowers, Miniature, for Cooling Electronic Equipment General Specification for<br> |
| GGG-T-00870 Revision B:1966 | TWEEZERS, CRAFTSMAN'S |
| MIL-I-85832 Base Document:1989 | INTERCOM, HELICOPTER AIRCREWMAN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE SET |
| MIL-H-46709 Revision E:1992 | HOWITZER, LIGHT, SELF-PROPELLED: 105MM, M108; AND HOWITZER, MEDIUM, SELF-PROPELLED: 155MM, M109, M109A1, M109A1B, M109A2; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-B-44232 Revision B:1991 | BACON, CANADIAN-STYLE, CURED, SMOKED, SLICED, IN BRINE, THERMOSTABILIZED, TRAY PACK |
| MIL-F-10805 Revision D:1973 | FUEL, COMPRESSED, TRIOXANE, RATION HEATING |
| MIL-B-44315 Base Document:1987 | Body Armor, Chest Plate and Face Shield, Explosive Ordnance Disposal (No S/S Document) |
| GG-R-1638 Revision A:1985 | REMOVAL, DENTAL CROWN (SIMPLEX) |
| MIL-A-36826 Revision A:1978 | ABRASIVE, DENTAL, POWDER |
| MIL-B-37409 Base Document:1976 | BOX, INSECT, SPECIMEN |
| MIL-H-43925 Revision D:1988 | HELMET, FLYER'S, PROTECTIVE, SPH-4 |
| MIL-I-13548 Revision A:1966 | INSULATION SLEEVING, ELECTRICAL (CABLE SPLICING) FT-96, FT-97, FT-98, AND FT-472 |
| DOD-P-15817 Revision D:1976 | PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC) |
| MIL-W-52663 Revision A:1075 | WATER PRETREATMENT DECONTAMINATION SET, CB AGENTS, PACKAGING OF |
| MIL-I-19166 Revision C:1963 | INSULATION TAPE, ELECTRICAL, HIGH-TEMPERATURE GLASS FIBER, PRESSURE-SENSITIVE |
| MIL-P-29206 Revision A:1987 | PIPE AND PIPE FITTINGS, GLASS FIBER REINFORCED PLASTIC, FOR LIQUID PETROLEUM LINES |
| MIL-C-85300 Base Document:1982 | COOLER, CRYOGENIC DETECTOR |
| GG-R-1549 Revision A:1986 | |
| AA-S-75 Revision A:1975 | SAFE, DENTAL X-RAY FILM PROTECTIVE |
| DDD-D-626 Revision A:1959 | DRAPE, SURGICAL, CLOTH |
| MIL-R-47321 Base Document:1987 | REGULATOR, PRESSURE |
| DOD-M-24672 Base Document:1986 | MOLDS, AND MOLD HEATING PLATEN FOR MOLDING ELECTRICAL CONNECTORS AND CABLES (METRIC) |
| MIL-HDBK-692 Revision B:1983 | A Guide to the Selection of Rubber O-Rings |
| MIL-P-53069 Base Document:1987 | POWER PLANT, DIESEL ENGINE, TRAILER MOUNTED 200 KW, 60 HERTZ AN/MJQ-11A |
| MIL-S-6625 Revision A:1953 | SPRAY EQUIPMENT, AIRCRAFT WINDSHIELD, ANTI ICING |
| DDD-P-54 Base Document:1957 | PADS, GAUZE, GAUZE AND COTTON AND GAUZE CELLULOSE AND COTTON |
| GG-C-121 Base Document:1959 | CANNULA, BRAIN, FRAZIER |
| MIL-C-11866 Revision C:1980 | CASTINGS, PRECISION, NONFERROUS |
| MIL-I-46894 Base Document:1973 | INSULATION PAPER, ASBESTOS CHYSOLITE |
| QQ-B-626 Revision D:1973 | BRASS, LEADED & NONLEADED ROD, SHAPES, FORGINGS & FLAT PRODUCT WITH FINISHED EDGES (BAR & STRIP) |
| MIL-A-16056 Revision A:1953 | ANESTHESIA APPARATUS, SPINAL, TUOHY |
| GGG-W-001405 Base Document:1968 | WRENCH, BOX (RATCHETING) |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL A 46027 : H | ARMOUR PLATE, ALUMINUM ALLOY, WELDABLE 5083 AND 5456 |
| MIL-B-18855 Revision D:1969 | BATTERY MK 53 MOD O SECONDARY TYPE, SILVER-ZINC-ALKALI |
| MIL-C-43153 Base Document:1963 | CLOTH, CARTRIDGE, POLYESTER & VISCOSE RAYON (FOR CARTRIDGE BAGS) |
| MIL-P-51403 Base Document:1974 | PLASTIC SHEET, VINYL, FLEXIBLE |
| MIL-C-12836 Revision A:1965 | CLOTH, KNITTED, COTTON |
| MIL S 22128 : A NOTICE 2 | SQUIB, ELECTRIC, MARK 2 MODS |
| MIL-F-11265 Revision A:1952 | FIBERBOARD, FACEFORM, GAS MASK |
| GGG-T-563 Revision A:1958 | TOOLS, BLACKSMITHS': CHISELS, FLATTERS, FULLERS, SET HAMMERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES |
| MIL-P-85499 Base Document:1981 | PRIMER MATERIAL |
| MIL C 7905 : G | CYLINDERS, STEEL COMPRESSED GAS, NONSHATTERABLE, SEAMLESS 1800 PSI AND 2100 PSI |
| MIL-C-19310 Revision A:1972 | COPPER-CHROMIUM-ALLOY CASTINGS |
| MIL-M-4871 Revision C:1984 | MAINTENANCE PLATFORM |
| W-C-575 Revision B:1981 | CONDUIT & FITTINGS, NONMETALLIC, RIGID, BITUMINIZED FIBER, LAMINATED WALL |
| MIL-S-44196 Revision A:1991 | SHELTER, TACTICAL, NON-EXPANDABLE |
| AA-F-2815 Base Document:1992 | FILING CABINET, UNINSULATED, SECURITY (SECRET AND CONFIDENTIAL STORAGE) |
| GGG-W-00645 Revision B:1967 | WRENCH, OPEN END BOX (AND BOX COMBINATION CROWFOOT, RATCHET, AND RATCHET CROWFOOT) |
| MIL-DTL-32100 Base Document:2002 | CARTRIDGE CASE, STEEL, 76-MILLIMETER (62-CALIBER) |
| MIL-B-28857 Base Document:1979 | BATTERY, PRIMARY, LITHIUM SULFUR DIOXIDE |
| MIL L 12626 : NOTICE 1 | LIGHT, SIGNAL (SIGNAL LAMP EQUIPMENT SE-11-()) |
| MIL-B-82439 Revision A:1969 | BATTERY, SEA WATER |
| MIL-C-4952 Revision E:1988 | Cartridges, Desiccant, Dehydrator |
| MIL-T-82291 Revision B:1979 | TABLECLOTH, NAPKIN, TABLE, TEXTILE AND DOILY, TEXTILE - MOMIE CLOTH |
| MIL R 18152 : A | ROD, STABILIZING, COATED |
| NNN-R-770 Base Document:1966 | RULE LABORATORY (MEASURING PLASTIC AND WOOD) |
| DOD-B-15072 Revision E:1981 | BATTERIES, STORAGE, LEAD-ACID, PORTABLE |
| CCC-W-51 Revision D:1975 | WADDING, COTTON, SURGICAL |
| MIL-I-81537 Base Document:1967 | IGNITION ELEMENT, ELECTRIC, MARK 13 MOD O |
| MIL S 83464 : NOTICE 1 | SAPPHIRE OR RUBY, SYNTHETIC, COMPONENTS, GENERAL SPECIFICATION FOR |
| GG-A-440 Revision C:1981 | ALIDADE, SURVEYING, TELESCOPE |
| MIL-F-50073 Revision A:1964 | FACEFORM, FIELD PROTECTIVE MASK, M8 |
| MIL-A-47315 Revision A:1991 | ADHESIVE, POLYURETHANE |
| MIL-A-82667-1 Base Document:1977 | AMMONIUM PERCHLORATE, HIGH PURITY |
| MIL-H-7365 Revision D:1986 | HOSE, AIR DUCT, FOR GROUND HEATERS |
| GG C 225 : NOTICE 1 | CHEST, X-RAY FILM PROTECTIVE |
| MIL-R-45036 Revision D:1978 | RUBBER, HARD,(EBONITE) NATURAL OR SYNTHETIC, SHEET, STRIP, ROD, TUBING AND MOLDED PARTS |
| GG-N-350 Base Document:1961 | NIPPER, INGROWN TOENAIL |
| MIL-T-81791 Base Document:1970 | TAPE, TEXTILE, NYLON, LANDBASED ARRESTING GEAR, 11 INCH |
| MIL-A-21001 Revision A:1962 | ARMING DEVICE MARK 6 MOD 0 (TORPEDO PRACTICE) |
| MIL-D-7106 Revision C:1987 | DRIFTMETER, ELECTRICALLY DRIVEN GYRO STABILIZED |
| MIL-Q-50531 Base Document:1970 | QUARTZ (GROUND) (FOR USE IN AMMUNITION) |
| MIL-A-3562 Revision B:1959 | ADHESIVE, SEALING (FOR FILTERS) |
| ASTM F 288 : 1996 : R2002 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| MIL-G-85613 Base Document:1983 | GROMMET, HARD SEAT, SWAGED, COUNTERSINK; GENERAL SPECIFICATION FOR |
| MIL P 12235 : 0 | PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37 MM PP M1000, 57 MM PP M1001, 75 MM PP M1002, 90 MM PP M1003, 105 MM PP M1004 AND 20 MM PP M1005 |
| MIL C 27315 : A | COATING SYSTEMS, ELASTOMERIC, THERMALLY REFLECTIVE AND RAIN EROSION RESISTANT |
| MIL C 10083 : C | CLAMPS, WIRE, GAS MASK |
| MIL-B-82572 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 84, 2000 POUND, EXPLOSIVE LOADING ASSEMBLING AND PACKING |
| MIL-G-0051066 Revision D:1982 | GENERATOR, SMOKE, MECHANICAL PULSE JET, M3A3 |
| MIL-S-23311 Revision A:1977 | SIGNAL, UNDERWATER SOUND, MARK 61 MOD O AND MARK 64 MOD O |
| MIL-F-22180 Base Document:1959 | FIRING DEVICE, DEMOLITION MARK 6 MOD 0 |
| MIL-P-11635 Revision C:1987 | PROJECTILE, 57 MM, SMOKE, WP, M308A1: FILLING ASSEMBLY |
| GGG-S-793 Revision A:1964 | STRIPPER, WIRE, BENCH |
| MIL-N-50071 Revision C:1964 | |
| MIL-C-2015 Revision B:1958 | CARRIAGE HOWITZER, 105 MM, M2A2 [W/REPAIR PARTS AND W/O EQUIPMENT OR ACCESSORIES |
| MIL-C-15096 Revision H:1979 | COAT, FOOD HANDLER'S (STEWARD) |
| MIL-F-48701 Revision B:1981 | |
| MIL-C-426 Revision B:1968 | CARRIER, TIMBER, HANDLED |
| MIL-C-20634 Revision D:1985 | CASE DRAWING BOARD AND PLANETABLE BOARD, 15-BY 20-INCH |
| MIL L 14362 : G | LUMBER: UNITIZING AND LOADING OF |
| MIL-S-7998 Revision A:1970 | Sandwich Construction Core Material, Balsa Wood |
| GGG-C-315 Revision A:1967 | CHISEL, BRICK |
| TT-L-132 Base Document:1966 | LITHOGRAPHIC PLATE ASPHALTUM SOLUTION |
| MIL-B-19231 Revision A:1972 | BAR, COPPER, SILVER BEARING (FOR COMMUTATORS) |
| GGG-S-65 Revision C:1992 | SAW, HAND |
| MIL-A-18977 Revision D:1971 | AMPLIFIER CHANNEL (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| MIL G 82639 : 0 | GLOVE ASSEMBLIES, TOXIC, INFECTIOUS, OR VESICANT SUBSTANCES, PROTECTIVE |
| MIL-S-51368 Revision B:1979 | SHELTER SYSTEM, COLLECTIVE PROTECTION, CHEMICAL-BIOLOGICAL: INFLATABLE, 10-MAN, TRAILER TRANSPORTED, M51 |
| MIL-J-82299 Revision C:1988 | Jacket, Extreme Cold Weather, Impermeable (No S/S Document) |
| MIL R 26895 : 0 | RELAY, FIELD CONTROL, GENERATOR 28 VOLT DC, TYPE MD AND 1 |
| ASTM F 949 : 2015 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings |
| MIL-L-52918 Base Document:1977 | LEVELS, SURVEYING, SELF LEVELLING AND TILTING |
| MIL-P-19602 Revision B:1974 | PRIMER, SIZE COATING, BAKING, FOR ROLLER COAT APPLICATION |
| MIL-A-82450 Revision B:1972 | Automatic Pilot Test Set (for Torpedo MK 46 Mod 0 and Mod 1) |
| MIL-S-37849 Base Document:1977 | SODIUM FLUORIDE SOLUTION USP |
| MIL-A-3920 Revision C:1977 | ADHESIVE, OPTICAL, THERMOSETTING |
| MIL-F-21608 Revision E:1979 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
| MIL-A-38202 Revision C:1972 | AIRCRAFT ARRESTING SYSTEM BAK-12A/E32A; PORTABLE, ROTARY FRICTION |
| MIL-T-37805 Base Document:1977 | TEST KIT, PREGNANCY DETERMINATION |
| MIL-P-37673 Base Document:1977 | PROMETHAZINE HYDROCHLORIDE TABLETS, USP |
| MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
| MIL-S-22824 Revision E:1993 | SLINGS, MULTIPLE LEG, VEHICLE (SHIPBOARD LOADING) |
| MIL-R-55566 Revision C:1986 | REEL, CABLE, RC-435 ( )/U |
| MIL C 0052876 : C | CABINETS, MONITOR, CY 7359/FSS 9(V) AND CY 7361/FSS 9(V) |
| MIL C 23687 : 0 | CASE, EXPLOSIVE DESTRUCTOR MARK 18 MOD O |
| MIL-B-17397 Revision D:1983 | BITTS, CLEATS, AND CHOCKS |
| MIL-T-16049 Revision C:1980 | TACHOMETER: ELECTRICAL; SELF GENERATING; MECHANICAL, FIXED MOUNTING AND HAND HELD; AND VIBRATING REED |
| MIL-S-50004 Revision A:1968 | SODIUM SULFATE, ANHYDROUS, TECHNICAL (FOR AMMUNITION USE) |
| ASTM F 2590 : 2006 : R2013 | Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type |
| GGG-S-51 Revision E:1995 | SAW, CIRCULAR, PORTABLE, ELECTRIC |
| MIL-S-81591 Base Document:1968 | Steel, Investment Castings, Carbon and Corrosion Resisting |
| MIL-B-63512 Base Document:1982 | BODY ASSEMBLY FOR MINE, ANTI PERSONNEL, BLU 92 B |
| MIL G 81239 : NOTICE 1 | |
| MIL-B-233 Revision D:1987 | BOXES, SUPPLY SUPPORT ITEMS, STOWAGE AND STORAGE |
| MIL-P-25726 Revision B:1959 | PROBE, TOTAL TEMPERATURE, TYPE MA-1 |
| MIL-STD-3031 Revision A:2011 | ARMY BUSINESS RULES FOR S1000D: INTERNATIONAL SPECIFICATION FOR TECHNICAL PUBLICATIONS UTILIZING A COMMON SOURCE DATA BASE |
| ASTM F 668 : 2017 : REDLINE | Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric |
| QQ-B-613 Revision D:1973 | BRASS, LEADED AND NONLEADED, FLAT PRODUCTS (PLATE, BAR, SHEET AND STRIP) |
| MIL-F-27630 Revision D:1970 | FILTER-SEPARATOR, LIQUID FUEL FFU-2/E |
| KK-G-476 Revision E:1976 | GLOVES, LEATHER, GAUNTLET, LINEMEN'S |
| ASTM F 1533 : 2001 : R2009 | Standard Specification for Deformed Polyethylene (PE) Liner (Withdrawn 2018) |
| MIL W 5846 : C | WIRE, ELECTRICAL, CHROMEL AND ALUMEL, THERMOCOUPLE |
| GGG-N-202 Revision C:1971 | NEEDLE, SAILMAKER'S |
| MIL T 55221 : NOTICE 1 | SPECIFICATION FOR THERMOMETER, SELF INDICATING, BIMETALLIC, M2 |
| ASTM F 2929 : 2017 : REDLINE | Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig |
| MIL-A-47309 Revision A:1991 | AMPLIFIER, PNEUMATIC |
| MMM-A-130 Revision B:1974 | ADHESIVE CONTACT |
| MIL S 25073 : 0 | |
| MIL-P-83763 Base Document:1969 | POWER SUPPLY, TRANSISTORIZED |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-D-37532 Base Document:1976 | DIFFERENTIATION DISKS, MICROORGANISM |
| MIL-C-36351 Revision B:1971 | CETYLPYRIDINIUM CHLORIDE SOLUTION ALCOHOLIC 0-05 PERCENT |
| MIL-H-85042 Revision A:1983 | HOOKS, BOMB RACK, GENERAL SPECIFICATION FOR |
| MIL-V-85033 Revision A:1981 | Valve, Charging |
| MIL-S-29413 Revision B:1988 | SHELTER, JOINING CORRIDOR FOR |
| MIL-L-24131 Revision C:1995 | LUBRICANT, COLLOIDAL GRAPHITE IN ISOPROPANOL |
| MIL-R-13742 Base Document:1954 | RDX, Desensitized |
| MIL-N-246 Revision B:1962 | NITROGLYCERIN |
| MIL-S-37368 Base Document:1976 | SODIUM BIPHOSPHATE AND SODIUM CITRATE SOLUTION |
| MIL-M-37363 Base Document:1975 | MICONAZOLE NITRATE CREAM, VAGINAL |
| MIL-N-37447 Base Document:1976 | NYSTATIN VAGINAL TABLETS, USP |
| MIL-P-37643 Base Document:1978 | PROBENECID TABLETS, USP |
| MIL-M-37818 Base Document:1977 | MINOCYCLINE HYDROCHLORIDE CAPSULES, USP |
| MIL-D-37566 Base Document:1976 | DIOCTYL SODIUM SULFOSUCCINATE CAPSULES USP |
| MIL-T-81533 Revision A:1967 | TRICHLOROETHANE, 1, 1, 1, (METHYL CHLOROFORM) INHIBITED, VAPOR DEGREASING |
| MIL M 21602 : 0 | MOTOR, PROPULSION, DIRECT CURRENT |
| MIL-C-24723 Base Document:1989 | CASTINGS, NICKEL-COPPER ALLOY |
| MIL-A-24780 Base Document:1992 | ACTUATING ASSEMBLY, SINGLE LINEAR MOTION, FOR THE REMOTE ACTUATION OF QUICK ACTING VALVES, GENERAL SPECIFICATION FOR |
| MIL-T-81914 Base Document:1973 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL B 0044266 : A | BODY ARMOR, TROUSERS, EXPLOSIVES ORDNANCE DISPOSAL (EOD) SYSTEM |
| MIL-T-55603 Revision A:1975 | TEST SET, TELEPHONE AN/SPTM-7 |
| GGG-P-791 Revision C:1961 | PULLERS, NAIL, HAND |
| MIL-G-17586 Base Document:1953 | GAGE KIT, ELECTRICAL, FOR BARE AND RIFLING OF 20MM9 GROOVE GUN BARRELS |
| MIL-PRF-24453 Revision B:2008 | INHIBITOR, CORROSION, SOLUBLE OIL |
| O H 00765 : D | HYDROCHLORIC ACID, TECHNICAL |
| DOD-S-82708 Base Document:1983 | SEALING COMPOUND, PREFORMED (METRIC) |
| MIL-G-52902 Revision A:1982 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, PU-751/M |
| MIL-A-85501 Base Document:1981 | ANTIOXIDANT N-PHENYL-N' -CYCLOHEXYL-P-PHENYLENE DIAMINE |
| MIL T 15480 : B | TRANSMITTING SET, RADIO |
| MIL-L-13788 Base Document:1964 | LEAD SALICYLATE |
| MIL-B-81819 Revision B:1987 | BEARING, PLAIN, (SLIDING SPHERICAL, SLEEVE & THRUST) SELF LUBRICATING, HIGH SPEED OSCILLATION, GENERAL SPECIFICATION FOR |
| MIL-S-12227 Revision F:1989 | Suit, Toxicological Agents Protective Cover, Cooling (No S/S Document) |
| MIL-C-23331 Base Document:1962 | CORES FOR SEARCH COIL ASSEMBLIES |
| MIL B 8111 : F | BOX SET, WOOD, NESTED, ORGANIZATIONAL EQUIPMENT TYPE MG AND 1A |
| MIL-H-5795 Revision A:1952 | HEADSET MICROPHONE H 46A/UR |
| MIL-T-21578 Revision A:1966 | TEST EQUIPMENT, HAZARDOUS LOCATION, INSTALLED, BASIC REQUIREMENTS FOR |
| NASA KSC SPEC Z 0001 : 1975 | SPECIFICATION FOR PIPE, 36% NICKEL, IRON-BASE (INVAR 36) |
| NASA KSC STD Z 0012 : 1990 | FLAME DEFLECTOR DESIGN, STANDARD FOR |
| MIL-D-3464 Revision E:1987 | DESICCANTS, ACTIVATED, BAGGED, PACKAGING USE AND STATIC DEHUMIDIFICATION |
| GG-A-614 Base Document:1960 | APPLICATOR, METAL |
| MIL-C-21679 Base Document:1958 | CLOCK DELAY CD-1O MOD 1 MECHANISM |
| MIL-S-14760 Base Document:1968 | SILICA (FOR USE IN AMMUNITION) |
| MIL-C-12423 Revision C:1961 | CABLE, TELEPHONE, WD-33/U |
| MIL-S-23809 Revision C:1975 | SECTION, EXERCISE, TORPEDO, MARK 64 MOD 2 |
| GGG-T-350 Revision B:1966 | TIRE LOCK RING TOOL, TIRE REMOVING TOOL, AND TIRE IRON |
| GG-S-928 Revision B:1950 | |
| MIL-STD-1208 Revision B:1991 | INORGANIC SODIUM SALTS AND COMPOUNDS, TECHNICAL GRADE |
| MIL-M-49502 Base Document:1988 | MANUALS, TECHNICAL - REPAIR PARTS & SPECIAL TOOLS LIST |
| TT-R-230 Revision B:1968 | REMOVER, PAINT (ALKALI TYPE FOR HOT APPLICATION) |
| MIL-C-29627 Base Document:1990 | COVERALLS, CATAPULT CREWMEN'S (FLAME RESISTANT) |
| MIL-F-37782 Revision A:1977 | FLUOCINONIDE OINTMENT |
| O-C-828 Revision C:1980 | CUPRIC SULFATE, PENTAHYDRATE, TECHNICAL |
| SAE AS 22805 : 1999 | SPRAY KIT, SELF PRESSURIZED |
| MIL-C-5584 Revision D:1988 | CONTAINER, SHIPPING AND STORAGE, METAL REUSABLE |
| AASHTO M 280 : 2014 | SPECIFICATION FOR METALLIC-COATED (CARBON) STEEL BARBED WIRE |
| MIL-C-82461 Base Document:1966 | CONTAINER TORPEDO, MK 197 MOD 1 AND 2 |
| NASA MSFC SPEC 2492 : 1995 | CLEANER, AQUEOUS WITH D-LIMONENE |
| A-A-3187 Base Document:2002 | FILE CABINETS, LATERAL AND SHELF FILES, STEEL |
| MIL-DTL-25666-5 Base Document:1978 | Converter, Liquid Oxygen Type GCU-17/A |
| MIL-P-7204 Revision B:1970 | POWER SUPPLY, 28 VOLT TYPE B 9 |
| MIL-M-37623 Base Document:1978 | METHOCARBAMOL TABLETS, NF |
| MIL-S-36113 Revision A:1972 | SIMMONS CITRATE AGAR DEHYDRATED |
| MIL-T-37427 Base Document:1976 | TRIMETHOBENZAMIDE HYDROCHLORIDE CAPSULES NF |
| O-D-1271 Revision B:1985 | DIETHYLENETRIAMINE, TECHNICAL |
| MIL-P-37149 Revision A:1975 | PROPOXYPHENE NAPSYLATE AND ACETAMINOPHEN TABLETS |
| MIL-T-37771 Base Document:1978 | TEST KIT, SERUM TRANSAMINASE |
| MIL-B-36420 Revision A:1972 | BROMPHENIRAMINE MALEATE, PHENYLEPHRINE HYDROCHLORIDE AND PHENYLPROPANOLAMINE HYDROCHLORIDE ELIXIR |
| MIL H 49198 : A | HEADSET-MICROPHONE KIT, MK-1564( )/AIC |
| MIL T 25439 : A (1) | TRANSMITTER, RATE OF FLOW, IN-FLIGHT REFUELLING, 0-10,000 PPM, TYPE MB-3 |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL-T-37362 Base Document:1976 | TETRACYCLINE SYRUP |
| MIL-T-37512 Revision A:1978 | THEOPHYLLINE ELIXIR |
| MIL P 25995 : B | PIPE, ALUMINUM ALLOY, DRAWN OR EXTRUDED |
| MIL B 8598 : A (1) | BULB, ELECTRICAL RESISTANCE, THERMOMETER, FREE AIR |
| MIL-STD-162 Revision E:1980 | MATERIALS HANDLING EQUIPMENT PREPARATION FOR SHIPMENT, STORAGE, CYCLIC MAINTENANCE ROUTINE TESTING AND PROCESS |
| MIL-S-87063 Revision B:1987 | SLACK, UTILITY, WOMENS, DENIM |
| MIL-S-81054 Revision A:1976 | STEEL, BARS AND FORGINGS, CHROMIUM NICKEL MOLYBDENUM VANADIUM (FOR TORPEDO MK 46 MOD O) |
| MIL-R-8903 Revision A:1966 | RESISTOR, VARIABLE, LINEAR PRECISION, TAPPABLE [ASG] |
| MIL-L-37343 Revision A:1976 | LEVODOPA CAPSULES USP |
| MIL-Q-37379 Base Document:1976 | QUINIDINE SULFATE TABLETS, USP |
| DOD-B-24531 Base Document:1976 | BATTERY, STORAGE, SILVER-ZINC ALKALINE (EMERGENCY); GENERAL SPECIFICATION FOR (METRIC) |
| MIL-P-53088 Base Document:1989 | POWER PLANT, ELECTRIC, DIESEL ENGINE DRIVEN, TRAILER MOUNTED, 3KW, 60 HERTZ |
| MIL-I-37403 Revision A:1977 | IODOCHLORHYDROXYQUIN AND HYDROCORTISONE CREAM |
| MIL S 55041 : C | SWITCH, WAVEGUIDE GENERAL SPECIFICATION FOR |
| MIL-V-43707 Revision B:1976 | VEST, AMMUNITION CARRYING, FOR M79 AND M203 LAUNCHERS |
| MIL-S-37726 Base Document:1977 | SODIUM PHOSPHATE, DIBASIC, AND MONOBASIC POTASSIUM PHOSPHATE SOLUTION |
| MIL-C-37550 Base Document:1976 | CRYSTAL VIOLET, ANALYZED REAGENT |
| MIL-C-37454 Base Document:1976 | CODEINE PHOSPHATE USP |
| MIL-L-37876 Base Document:1978 | LIDOCAINE HYDROCHLORIDE JELLY |
| MIL-N-37311 Base Document:1976 | NYSTATIN CREAM |
| MIL C 85361 : 0 | CARRYING CASE ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL-A-82836 Base Document:1987 | ADHESIVE, EPOXY RESIN, STRUCTURAL BONDING, NON-ASBESTOS |
| MIL-A-12374 Revision D:1982 | ANEMOMETER ML-433 PM AND CASE, ANEMOMETER CY-1397 PM |
| MIL-J-82293 Revision D:1988 | JACKET, UTILITY, MAN'S, BLUE |
| MIL-R-29103 Revision B:1980 | RAINCOAT, MAN'S, LIGHTWEIGHT, COATED |
| MIL-C-85642 Base Document:1985 | COMMUNICATIONS CENTRAL AN/ASC-26 |
| MIL-T-55659 Base Document:1971 | TEST FACILITIES KIT, MK-994()/AR (UNITS OF) |
| MIL E 37148 : B | ETHAMBUTOL HYDROCHLORIDE TABLETS, USP |
| MIL-O-37257 Revision A:1976 | OXTRIPHYLLINE TABLETS, NF |
| MIL-I-37676 Base Document:1977 | IBUPROFEN TABLETS |
| MIL-M-87033 Revision A:1987 | MITTEN SET, EXTREME COLD WEATHER |
| MIL-DTL-12235 Revision A:2009 | PROJECTILE, PLATE-PROOFING (FOR IMPACT OR SHOCK TESTING) 37 MM M1000, 57 MM M1001, 75 MM M1002, 90 MM M1003, 105 MM M1004, 20 MM M1005, 57 MM M1001A, AND 75 MM M1002A |
| MIL-A-22424 Revision A:1967 | ADAPTERS, COMPENSATING, MS281O7, MA-1 COMPASS SYSTEM |
| MIL-B-38401 Revision A:1973 | BEACON SET, RADIO AN/URT-33 |
| MIL-U-37763 Base Document:1978 | UNDECYLENIC ACID SOLUTION |
| MIL-P-18704 Revision A:1992 | PRIMER, LOCK, COMBINATION, MARK 15 MOD 2 |
| MIL-E-37840 Base Document:1977 | EPINEPHRINE SUSPENSION, STERILE |
| MIL-C-1002 Revision J:1986 | CASE, FIELD, FIRST AID DRESSING, LEATHER, (MILITARY POLICE) |
| MIL-C-52298 Revision D:1983 | COLUMN ASSEMBLY, TRESTLE |
| MIL-Y-11241 Revision D:1961 | YEAST, AUTOLYSATE, PASTE |
| MIL C 27613 : A | COVERALLS, ROCKET FUEL HANDLERS, CMU/2/P |
| MIL I 6839 : C | INDICATOR, POSITION, LANDING GEAR |
| MIL D 48561 : A | |
| MIL-A-70604 Base Document:1988 | AMINE BONDING AGENT |
| FF-B-171 Revision B:1993 | BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC |
| TT E 00488 : B | ENAMEL, PRIMER COATING AND CLEAR LACQUER (IN PRESSURIZED DISPENSERS) |
| MIL-C-10463 Revision B:1958 | CHEMICAL AGENT, CYANOGEN CHLORIDE |
| MIL-P-22497 Revision C:1970 | POWER SUPPLY, TYPE IV (A) (TORPEDO TESTING) |
| MIL-PRF-82736 Revision A:1988 | Ignition Pellets, Magnesium-Fluorocarbon |
| MIL-B-25337 Revision B:1970 | BOTTLE ASSEMBLIES, VACUUM, AIRCRAFT |
| MIL D 82659 : (1) | DIETHYLENE GLYCOL DIBUTYL ETHER |
| MIL-B-81936 Base Document:1973 | BEARINGS, PLAIN, SELF ALIGNING (BECU, CRES RACE) |
| MIL-R-1296 Revision F:1993 | RIFLE, CALIBER .22 LR COMMERCIAL, FOR MATCH AND TRAINING |
| L-P-525 Revision A:1958 | PLASTIC STRIP, DENTAL MATRIX |
| MIL-W-81822 Revision A:1982 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| MIL J 83010 : B NOTICE 1 | JACK, AIRCRAFT LANDING GEAR MMU-87/E, 35-TON CAPACITY |
| MIL-H-53062 Base Document:1986 | HOSE ASSEMBLY, RUBBER LIGHTWEIGHT, COLLAPSIBLE 6 INCH; FOR POL SERVICE |
| MIL-P-87112 Base Document:1977 | PRIMER COATING, ELASTOMERIC, POLYSULFIDE, CORROSION INHIBITING |
| FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
| MIL C 71167 : 0 | CARTRIDGE, 7.62mm, M973 BALL SHORT RANGE TRAINING AMMUNITION, PERFORMANCE SPECIFICATION FOR |
| MIL-G-10944 Revision B:1965 | GAGE, DIMENSIONAL CONTROL |
| MIL-N-23182 Revision A:1967 | NETWORKS, PULSE FORMING, RADAR, GENERAL SPECIFICATION FOR |
| MIL B 43021 : E | BINDER, LOAD, CARGO TIE-DOWN, 10,000 POUND CAPACITY |
| NNN-S-750 Base Document:1962 | STAND LABORATORY APPARATUS SUPPORT |
| MIL-L-24943 Revision A:1993 | LINER, FIREMAN'S COAT, QUILTED |
| GG-M-001342 Base Document:1968 | MARKER, TUBE TYPE, FINE TIP, TRANSPARENCY |
| GG-M-001130 Base Document:1966 | MARKER, TUBE TYPE, FINE TIP |
| MIL T 83454 : 0 | TERMINAL, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| MIL-A-20383 Revision D:1982 | ARROW SETS, SURVEYING |
| MIL-B-36444 Revision A:1977 | BAG, URINE COLLECTION, PEDIATRIC, PLASTIC, DISPOSABLE |
| MIL-C-19062 Revision C:1977 | CONTROL CABLE ASSEMBLIES AND CONNECTOR PLUGS AND RECEPTACLES (FOR TORPEDOES) |
| MIL-A-81851 Revision B:1986 | ALTIMETER AAU-31/A |
| MIL-S-52547 Revision A:1974 | SUPPLEMENTARY EQUIPMENT, MAINTENANCE COMPANY, PACKAGING OF |
| MIL-S-44221 Revision A:1989 | STAND, CANTEEN CUP |
| GG C 00289 : NOTICE 1 | CHISELS, DENTURE-TRIMMING |
| MIL-S-7014 Revision C:1970 | SOLENOID, FIRING CALIBER .50 GUN 28 VOLT DC TYPE G AND 22 |
| MIL-T-45277 Base Document:1973 | TRANSMITTER, INDUCTION COMPASS T-611 (/ASN) |
| MIL G 432 : G | GASKET NON METALLIC, SYNTHETIC RUBBER |
| TT-E-776 Revision B:1960 | ETHYLENE GLYCOL MONOBUTYL ETHER (FOR USE IN ORGANIC COATINGS) |
| GG S 00928 : C | SYRINGE, METAL, EAR |
| MIL-B-43311 Revision E:1987 | BEEF, DICED, DEHYDRATED, UNCOOKED |
| MIL-A-4864 Revision A:1960 | ALUMINUM WOOL |
| MIL-I-17214 Revision B:1984 | INDICATOR, PERMEABILITY, LOW-MU (GO-NO-GO) |
| MIL C 17-112 : A | CABLE, RADIO FREQUENCY FLEXIBLE COAXIAL 50 OHMS H17/112 RG304 |
| MIL-C-43011 Revision A:1978 | CARRYING CASE, TEST SET, SOIL TRAFFICABILITY |
| MIL-B-11582 Revision C:1978 | BASE PLATE, THEODOLITE: ALUMINUM |
| MIL-A-37819 Revision A:1978 | ARTICULATOR, DENTAL, PLAIN LINE, LINGUAL ACCESS DESIGN, WITH CONDYLAR AND AUDITORY PINS, AND REPLACEMENT MOUNTING INSERTS |
| MIL-D-537 Revision F:1992 | DISKS, COLOUR STANDARDS |
| MIL C 13113 : B | CHEST SET GROUP AN/GSA-6() |
| MIL-P-27965 Base Document:1967 | PLOTTING SET, THEODOLITE ML-625/GM |
| MIL-C-5136 Revision C:1968 | CABLE, POWER, ELECTRICAL POLYCHLOROPRENE SHEATHED, BUNA COMPOUND INSULATED |
| MIL-B-12841 Revision B:1970 | BASIC ISSUE ITEMS FOR MILITARY VEHICLES, CARRIAGES AND EQUIPMENT; PREPARATION FOR SHIPMENT AND STORAGE |
| MIL-S-25345 Revision A:1971 | SWITCH, THERMOSTATIC, TYPE MH-1 |
| MIL-B-83931 Revision B:1986 | BINDER, FLEXIBLE, TECHNICAL MANUAL |
| MIL-C-81346 Revision B:1973 | COMPOUND, DECK COVERING, NONSLIP, LIGHTWEIGHT FOR ALUMINUM ALLOY LANDING MATS |
| MIL-L-11566 Revision C:1978 | LEVEL, LEVEL ROD |
| MIL-C-83864 Revision A:1982 | CONTAINER, INNER, SURVIVAL KIT |
| MIL-M-27529 Revision B:1973 | Mittens, Extreme Cold Weather Survival, SRU-10/P (No S/S Document) |
| GG-M-105 Revision D:1977 | MALLET, ORAL SURGERY |
| MIL-B-36777 Revision A:1971 | BLOWTORCH, ALCOHOL |
| MIL-C-15065 Revision J:1990 | COAT, FRONTS |
| MIL-T-27200 Revision C:1975 | TRANSMITTER, RATE GYROSCOPE TRU-2A/A |
| MIL-L-38217 Revision D:1975 | LIGHT, MARKER DISTRESS |
| GG-B-2043 Base Document:1977 | BRUSH, SURGICAL SCRUB |
| MIL G 44370 : 0 | GAITERS, SNOW AND ICE TRAVERSING EQUIPMENT (SITE) |
| GGG-T-00559 Base Document:1964 | TOOL KIT, LEATHERCRAFT |
| L-F-36 Revision C:1963 | FACESHIELD, INDUSTRIAL |
| MIL-B-10122 Revision E:1991 | BARGE, LIQUID CARGO: NONPROPELLED, STEEL, OFFSHORE, 4,160-BARREL, 120-FOOT, DESIGN 231C |
| L-P-600 Revision A:1972 | PORTFOLIO, PLASTIC |
| MIL-B-46211 Revision D:1969 | BURSTER, INCENDIARY, FIELD, M4 (W/O FUZE) |
| PPP-T-1150 Revision B:1978 | TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY, PACKAGING AND PACKING OF |
| EE-B-575 Revision E:1989 | BOUILLON (SOUP AND GRAVY BASES) |
| MIL-H-51166 Revision A:1964 | HOOD, FIELD PROTECTIVE MASK, M6 |
| MIL-B-24222 Revision A:1978 | BAGS , STORAGE, MASK, AIR LINE |
| MIL C 572 : G | CORD, YARNS AND MONOFILAMENT ORGANIC SYNTHETIC FIBER |
| MIL-C-496 Revision D:1992 | CLIP, END, STRAP |
| MIL-S-13943 Revision B:1983 | SODIUM SULFATE, ANHYDROUS, TECHNICAL |
| MIL F 11543 : B | FLUXMETER TS-15()/AP |
| MIL-D-24090 Base Document:1964 | |
| QQ B 671 : B | BRONZE, ALUMINUM; CASTINGS |
| MIL R 51446 : 0 | RIOT CONTROL AGENT, CR |
| MIL-T-41828 Revision H:1987 | TROUSERS, MEN'S, WOOL AND POLYESTER/WOOL |
| MIL-B-60089 Revision B:1969 | BURSTER, CHEMICAL AGENT MINE, M38; INITIATOR MINE BURSTER, M48 |
| KK-C-1535 Revision B:1976 | CASE, DISPATCH, MOLDED PLASTIC (METAL FRAME) |
| MIL-S-44163 Revision B:1989 | SHIRT, COLD WEATHER, SYNTHETIC FIBER PILE |
| MIL-P-17553 Revision A:1976 | PACKING, PREFORMED, O RING, SYNTHETIC RUBBER |
| MIL-L-14758 Base Document:1968 | LEAD AZIDE (SPECIAL PURPOSE) (FOR USE IN AMMUNITION) |
| MIL-V-83148 Base Document:1970 | VARNISH, ELECTRICALLY INSULATIVE, MOISTURE, FUNGUS, AND HIGH TEMPERATURE RESISTANT |
| GGG T 00671 : B (1) | TROWELS |
| MIL-H-21623 Revision B:1990 | HOLDERS, RADIAC SAMPLE |
| MIL-S-58112 Base Document:1989 | SLING, MULTI LEG, HELICOPTER, EXTERNAL CARGO |
| MIL-D-55456 Revision B:1969 | Distribution Box, J-1077( )/U Distribution Box, J-2317( )/U |
| MIL-C-13142 Revision A:1956 | CRYSTAL UNIT DC-9-AJ, GENERAL SPECIFICATION FOR |
| MIL-B-21418 Base Document:1958 | BELTING SYSTEM, AMMUNITION, MARK 2 MOD O (FOR 2O MM MARK 1OO SERIES AMMUNITION) |
| MIL V 7560 : C | VALVE ASSEMBLY, OXYGEN CYLINDER, BAILOUT |
| MIL B 15382 : C | BOLT, FIREBRICK ANCHOR |
| MIL-C-22652 Base Document:1960 | CARTRIDGE, ACTUATOR, MARK 25 MOD O |
| MIL-H-10044 Revision B:1964 | HINGE, CHEST, OFFSET |
| MIL-B-37295 Revision A:1978 | BATH, WATER, DENTAL, IMPRESS1ON MATERIAL, LOW-TEMPERATURE |
| MIL A 3962 : E | ANCHORS, GROUND, ARROWHEAD WITH DRIVING EQUIPMENT |
| DD-T-733 Base Document:1960 | TUBE, HYPODERMIC NEEDLE PROTECTING |
| DOD N 10461 : B | NAPHTHENIC ACID, TECHNICAL (METRIC) |
| MIL-P-54001 Revision A:1973 | PLUG, PIPE, MAGNETIC, HEADLESS, IRON, STEEL OR ALUMINUM ALLOY |
| MIL-G-19465 Revision E:1980 | GLOVE, CHIPPER'S, GAUNTLET |
| MIL-L-16355 Revision E:1993 | LEAD STYPHNATE, BASIC |
| MIL-A-24179 Revision A:1969 | ADHESIVE, FLEXIBLE UNICELLULAR - PLASTIC THERMAL INSULATION |
| MIL-I-85080 Base Document:1977 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| O-H-205 Revision D:1976 | |
| MIL-B-48024 Base Document:1972 | BOXES, AMMUNITION PACKING: WOOD, (W/PLYWOOD TOP AND BOTTOM) NAILED |
| MIL-A-52401 Revision B:1974 | ADAPTER, ARCTIC, DRIVE-TYPE PICKET |
| MIL-C-11782 Revision C:1967 | CAMOUFLAGE NET DRAPE SETS, PACKAGING OF |
| MIL-PRF-82537 Revision A:1988 | CASE, CARTRIDGE, STEEL, SPIRAL-WRAPPED 40 MILLIMETER (MM) AM LARGER CAMBERS, GENERAL SPECIFICATION FOR |
| MIL-A-82569 Base Document:1969 | ADHESIVE, NEOPRENE BASE, MEDIUM VISCOSITY |
| MIL-C-46876 Base Document:1973 | CEMENT, CARBONACEOUS |
| MIL-F-47222 Base Document:1974 | FOAM, POLYURETHANE, RIGID |
| MIL-B-2505 Revision G:1984 | BUCKLE, CENTER BAR WITH TONGUE |
| MIL-A-35045 Revision D:1988 | APPLESAUCE, INSTANT |
| MIL C 36807 : NOTICE 1 | |
| MIL-P-21325 Revision A:0196 | POWER SUPPLY FOR TEST SET MARK 281 MOD O |
| GGG-A-576 Revision C:1994 | ANVIL, BLACKSMITHS |
| MIL-F-50048 Base Document:1959 | FILTER, GAS.,1,200CFM, C32 |
| MIL-W-42062 Base Document:1988 | |
| MIL-H-14040 Base Document:1965 | HEADPIECE, COLLECTIVE PROTECTOR, HOSPITAL, M13 |
| MIL-C-24706 Base Document:1988 | COUPLING, PIPE, HEAT-RECOVERABLE |
| MIL-C-15705 Revision A:1951 | CALKING COMPOUND (LIQUID POLYMER POLYSOLFRIDE SYNTHETIC RUBBER, FORMULA NO. 112 FOR METAL ENCLOSURES) |
| MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
| MIL C 47070 : 0 | COMPOUND, URETHANE |
| MIL-G-85468 Base Document:1981 | GENERATOR CONTROL INDICATOR SG-118/AST-4(V) |
| MIL C 62327 : A NOTICE 1 | CARRIER, ARMORED, FULL TRACKED, M901 TOW VEHICLE (LESS TOW WEAPON) AND M981 FISTV, PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-P-48333 Base Document:1974 | PROPELLANT, LIQUID |
| ASTM C 220 : 1991 : R1999 | Standard Specification for Flat Asbestos-Cement Sheets |
| MIL-PRF-19769 Revision C:2009 | Gaskets, Synthetic Rubber Oil Resistant, Slide Valve (for 21-Inch Submerged Torpedo Tubes) |
| MIL-E-24743 Base Document:1991 | ENCLOSURE, COMMON ELECTRONIC EQUIPMENT, GENERAL SPECIFICATION |
| MIL-C-43724 Revision C:1983 | CAP, HOT WEATHER, OLIVE GREEN 507 |
| MIL-S-52697 Revision A:1975 | SURVEYING CONTROL SECTION TRUCK MOUNTED PACKAGING OF |
| GG-S-945 Revision A:1959 | SYRINGE AND NEEDLE, DISPOSABLE, HYPODERMIC, STERILE, SINGLE INJECTION |
| MIL-P-36637 Revision B:1976 | PIPETTING MACHINE, SEMI AUTOMATIC |
| MIL-I-5417 Revision D:1968 | INDICATOR, INDICATED AIRSPEED 40-400 KNOTS |
| MIL-I-5721 Revision C:1970 | INDICATOR, INDICATED AIRSPEED 20-250 KNOTS |
| MIL-R-83283 Revision A:1991 | RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| PPP-C-843 Revision D:1977 | CUSHIONING MATERIAL, CELLULOSIC |
| PPP-B-640 Revision D:1966 | BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL |
| O-S-576 Revision F:1967 | SODIUM BICARBONATE, TECHNICAL |
| MIL-L-2045 Revision B:1966 | LOOP, STRAP FASTENER [FOR NONEQUIPAGE ITEMS] |
| MIL-D-81068 Base Document:1964 | DEVICE, HIT AND LOCATING (FOR TORPEDO MK 46 MOD O) |
| MIL-C-3580 Revision E:1991 | CRANES AND CRANE SHOVELS, TRUCK, CRAWLER, AND WHEEL MOUNTED FULL REVOLVING AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-G-15214 Revision E:1980 | GAGE, DEPTH, WRIST, DIVER'S, SELF LUMINOUS DIAL |
| MIL-B-44332 Base Document:1988 | BAG, CARRYING, PROTECTIVE SUIT, EXPLOSIVE ORDINANCE DEVICE (EOD) |
| MIL-P-82563 Base Document:1968 | POWER SUPPLY ASSEMBLY LD546974 (FOR AFTERBODY TEST SET MK 442 MOD O AND ELECTRICAL CABLE TEST SET MARK 444 MOD O) |
| MIL-P-18317 Base Document:1954 | PLATING, BLACK NICKEL (ELECTRODEPOSITED) ON BRASS, BRONZE, OR STEEL |
| MIL-C-14780 Base Document:1968 | CLOTH, SILK, MOMME (FOR USE WITH AMMUNITION) |
| MIL-V-0050066 Revision C:1967 | VOICEMETER OUTLET VALVE ASSEMBLY, C29R1 |
| MIL-I-50711 Base Document:1970 | IRON BASE SINTERED METAL BARS (OIL PREGNATED) |
| MIL T 49053 : 0 | TEST SET, RELAY TS-1775()/U |
| MIL-L-36296 Base Document:1964 | LABEL TAPE, PRESSURE SENSITIVE ADHESIVE KEEP OUT OF REACH OF CHILDREN, LEGEND |
| MIL-DTL-81722 Revision B:2017 | VALVE, INFLATION, LIFE RAFT, FLU-6/P |
| MIL-C-85493 Base Document:1981 | CATALYST, BURN RATE 2, 2 BIS (ETHYLFERROCENYL) PROPANE |
| MIL-A-27328 Base Document:1960 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-7 |
| MIL-G-55210 Base Document:1963 | GENERATOR, THERMAL NOISE SG-419 ( ) /U |
| MIL-B-52508 Revision A:1972 | BOX, METAL SHIPPING REUSABLE TRANSPORTER, CONTROLLED HUMIDITY STEEL 270 CUBIC FOOT CAPACITY 9,000 POUND MAXIMUM LOAD |
| MIL C 19328 : E | CONVERTER, LIQUID OXYGEN, 5 LITER, MBA-5A |
| MIL H 53095 : A | HOSE ASSEMBLIES, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE, LOW TEMPERATURE |
| MIL I 7304 : B | INDICATOR, PRESSURE TORQUE SENSITIVE TYPE A 9 |
| MIL I 9304 : B | INDICATOR, RATE OF FLOW, FUEL, SYNCHRO STYLE 0-12,000 PPH TYPE MA 6 |
| MIL-M-63221 Revision A:1992 | MORTAR, 60MM, M224 (WITHOUT M64 SIGHT UNIT) |
| MIL-I-5488 Revision A:1957 | INDICATOR TURN AND SLIP 28V DC 2 3/4 SIX, TYPE MD 10 |
| MIL-M-18294 Revision D:1987 | METER, FLUID QUANTITY VOLUMETRIC |
| MIL-A-25487 Revision B:1987 | ANTENNA AT-172()/ARN-14 |
| MIL-B-913 Base Document:1993 | BEARINGS, BALL, ANNULAR, FOR INSTRUMENTS AND PRECISION ROTATING COMPONENTS (METRIC) GENERAL SPECIFICATION FOR |
| MIL-B-36120 Base Document:1962 | BACK REST, LITTER, NONADJUSTABLE |
| MIL T 6735 : A | TUBING, CHROME-MOLYBDENUM, 4135 STEEL, SEAMLESS AIRCRAFT QUALITY |
| MIL-P-82427 Revision C:1985 | POWER UNIT (FOR TORPEDO MK 46 MOD 1) |
| MIL-S-12210 Revision A:1956 | STRONTIUM OXALATE |
| MIL-B-20390 Revision B:1972 | BOARD, AMMUNITION CONTAINER |
| MIL-DTL-19264 Revision D:2016 | PROPELLANT, BS-NACO, FOR PROPELLING CHARGES FOR NAVY 5-INCH GUNS |
| MIL-PRF-26542-11 Revision B:2002 | MICROPHONE AND MICROPHONE ASSEMBLY, M26542/11 AND M26542/11-01 |
| MIL S 21427 : B | STRAINER, ASSEMBLIES, MAIN STREAM, HIGH PRESSURE (SIZES 4 INCHES AND ABOVE) |
| MIL L 6363 : G | LAMP, INCANDESCENT, AVIATION SERVICE GENERAL SPECIFICATION FOR |
| MIL-F-63412 Base Document:1981 | FUZE PROBE ASSEMBLY, PNEUMATIC ASSEMBLING & PACKING (TOW) |
| MIL-T-23588 Revision C:1974 | TRANSDUCER, PRESSURE |
| ASTM PS 93 : 1998 | Provisional Standard Specification for Fabricated Shapes and Finished Parts Fabricated From Polyimide Resins (Withdrawn 2001) |
| MIL-A-22434 Revision A:1961 | ADHESIVE, POLYESTER, THIXOTROPIC |
| MIL-T-24944 Base Document:1989 | TROUSERS, FLIGHT DECK, CREWMEN'S |
| MIL-D-7166 Revision A:1952 | DUMMY LOAD WATTMETER DA 43/U |
| MIL-P-52200 Revision C:1992 | PONTOON BOAT, HALF SECTION, ALUMINUM HULL, SPOON BOW |
| MIL E 82901 : 0 | EXPLOSIVE, PLASTIC BONDED, CAST PBXN-110 |
| MIL-DTL-43243 Revision D:2002 | SEPARATOR, PARACHUTE REMOVABLE CONNECTOR LINK |
| MIL-T-589 Revision A:1953 | THICKENER, INCENDIARY OIL,M1 |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
| MIL S 83734 : F | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE PACKAGES (DIPS) & SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-C-12166 Base Document:1952 | COPPER ROD FOR CRUSHER CYLINDERS |
| MIL-DTL-18375H: 2005 | WIRE ROPE, FLEXIBLE, CORROSION-RESISTING, NONMAGNETIC, FOR AIRCRAFT CONTROL |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| SAE AMS G 25667 : 2016 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| SAE AS 13591 : 2001 | CLEANING METHODS &PROCEDURES FOR BREATHING OXYGEN EQUIPMENT |
| ASTM F 2619/F2619M : 2013 : REDLINE | Standard Specification for High-Density Polyethylene (PE) Line Pipe |
| ASTM A 536 : 1984 : R1999 : EDT 1 | Standard Specification for Ductile Iron Castings |
| ASTM F 439 : 2013 : REDLINE | Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 |
| SAE AS 81824 : 2016 | SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
| ASTM C 1450/C1450M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM F 957 : 1991 : R2001 | Standard Specification for Gong, Sound Signaling |
| SAE AS 4510 : 2013 | FITTINGS, WELD, FLUID CONNECTION, 5000 PSI |
| ASTM F 1237 : 2015 : REDLINE | Standard Specification for Commercial Dishwashing Machines, Multiple-Tank, Continuous Oval-Conveyor Type, Heat Sanitizing |
| SAE MA 2150 : 2015 | CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC |
| SAE AS 6026 : 2013 | CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM |
| SAE AS 838 : 2013 | AIRCRAFT HYDRAULIC STARTER/PUMPS |
| ASTM F 957 : 1991 : R2012 | Standard Specification for Gong, Sound Signaling |
| MIL-F-51536 Base Document:1988 | FILTER UNIT, GAS-PARTICULATE, 200 CFM, 208V, 400 HZ, M56 |
| ASTM B 90M : 1990 | Specification for Magnesium-Alloy Sheet and Plate (Metric) (Withdrawn 1993) |
| ASTM A 797 : 1982 | Specification for Aluminum-Zinc Alloy-Coated Steel Overhead Ground Wire Strand (Withdrawn 1988) |
| ASTM B 167 : 2011 : R2016 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube |
| SAE AMS S 7108 : 2016 | STEEL, ALLOY (MANGANESE-SILICON-NICKEL), BARS AND FORGING STOCK (AIRCRAFT QUALITY) |
| ASTM D 6576 : 2013 : REDLINE | Standard Specification for Flexible Cellular Rubber Chemically Blown |
| SAE AS 85376 : 2007 | STAND, SHIPBOARD, HELICOPTER MAINTENANCE |
| SAE AS 81703 : 2012 | CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| SAE AS 81822 : 2011 | WIRE, ELECTRICAL, SOLDERLESS WRAP, INSULATED AND UNINSULATED, GENERAL SPECIFICATION FOR |
| SAE AS 1709 : 2014 | COUPLING ASSEMBLY, HYDRAULIC SELF SEALING, QUICK DISCONNECT |
| ASTM C 221 : 1998 : R2003 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM B 163 : 2011 : EDT 2 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| SAE AMS 4938 : 2013 | FORGINGS, TITANIUM ALLOYS HEAT-TREATED, FINISHED-PART PROPERTIES: SHORT-TRANSVERSE TENSILE, FRACTURE TOUGHNESS, AND LONGITUDINAL TIME-DEPENDENT-TENSION |
| SAE AS 1297 : 2008(S2014) | REDUCERS, PNEUMATIC PRESSURE, MISSILE |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| SAE AMS R 83283 : 2014 | RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE |
| ASTM A 823 : 1999 : R2008 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM E 674 : 2012 | Standard Specification for Industrial Perforated Plate and Screens (Round Opening Series) |
| ASTM F 2443 : 2004 | Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End |
| ASTM C 222 : 1997 : R2014 | Standard Specification for Asbestos-Cement Roofing Shingles (Withdrawn 2019) |
| ASTM C 220 : 1991 : R2009 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM C 659 : 1990 : R2003 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM B 483/B483M : 2013 : EDT 1 | Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications |
| ASTM C 221 : 1998 : R2014 | Standard Specification for Corrugated Asbestos-Cement Sheets (Withdrawn 2019) |
| ASTM C 1449/C1449M : 2005 : REV A : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ASTM B 247 : 2015 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings |
| ASTM B 236M : 2007 : R2015 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric) (Withdrawn 2024) |
| ASTM PS 106 : 2001 | Provisional Standard Specification for Rods and Tubes of Polyethylene (PE) |
| ASTM A 555/A555M : 2016 : REDLINE | Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods |
| ASTM C 875 : 1998 | Standard Specification for Asbestos-Cement Conduit |
| ASTM B 164 : 2003 : R2008 | Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| ASTM F 1735 : 2009 : R2015 | Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits |
| ASTM F 1183 : 1996 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| ASTM F 2443 : 2004 : R2012 | Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End |
| ASTM F 492 : 1995 | Standard Specification for Propylene and Polypropylene (PP) Plastic-Lined Ferrous Metal Pipe and Fittings (Withdrawn 2004) |
| ASTM E 323 : 2011 : R2016 | Standard Specification for Perforated-Plate Sieves for Testing Purposes |
| ASTM F 1412 : 2016 : REDLINE | Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems |
| ASTM F 679 : 2016 : REDLINE | Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings |
| ASTM F 1312 : 1990 : R2013 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM A 491 : 2011 : R2017 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM F 423 : 1995 | Standard Specification for Polytetrafluoroethylene (PTFE) Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges (Withdrawn 2002) |
| ASTM C 220 : 1991 : R2004 : EDT 1 | Standard Specification for Flat Asbestos-Cement Sheets |
| ASTM D 98 : 2015 : REDLINE | Standard Specification for Calcium Chloride |
| ASTM A 480/A480M : 2017-11 | SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP |
| ASTM A 116 : 2011 | Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric |
| ASTM B 774 : 2000 : R2014 | Standard Specification for Low Melting Point Alloys |
| ASTM D 2235 : 2004 : R2016 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| ASTM F 1040 : 1987 : R2007 | Standard Specification for Filter Units, Air Conditioning: Viscous-Impingement and Dry Types, Replaceable (Withdrawn 2012) |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| ASTM F 1040 : 1987 : R1993 | Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable |
| NASA KSC SPEC E 0031 : 2008 | CABLES, ELECTRICAL, SPECIFICATION FOR |
| NASA KSC STD Z 0010 : 1983 | DESIGN OF ENVIRONMENTAL CONTROL SYSTEMS, GROUND COOLANT SYSTEMS, COOLANT SERVICING SYSTEMS, AND GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| ASTM F 1040 : 1987 : R2001 | Standard Specification for Filter Units, Air Conditioning Viscous-Impingement and Dry Types, Replaceable |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| MIL-R-7649 Revision A:1953 | RELAY, ARMATURE, EXCITER-CONTROL, 115/200 VOLT, 3 PHASE 4 WIRE 400 CYCLE, TYPE H1 |
| SAE AMS L P 390 : 2000 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM, AND HIGH DENSITY) |
| ASTM A 623M : 2016 : REDLINE | Standard Specification for Tin Mill Products, General Requirements [Metric] |
| ASTM F 289 : 1996 : R2002 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM F 1803 : 2015 | Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter |
| ASTM B 404/B404M : 2002 | Standard Specification for Aluminum and Aluminum-Alloy Seamless Condenser and Heat-Exchanger Tubes with Integral Fins (Withdrawn 2006) |
| ASTM F 771 : 1999 : R2005 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems (Withdrawn 2014) |
| MIL-R-5632 Revision B:1972 | ROD, AND WIRE, STEEL WELDING [FOR AIRCRAFT] |
| SAE AMS I 538 : 2016 | INSULATION, ELECTRICAL, PASTED-MICA |
| ASTM D 2750 : 1995 | Specification for Acrylonitrile- Butadiene-Sytrene (ABS) Plastics Utilities Conduit and Fittings (Withdrawn 1997) |
| MIL-T-7099 Revision E:1979 | TERMINAL, LUG AND SPLICE, CRIMP STYLE ALUMINUM FOR ALUMINUM AIRCRAFT WIRE |
| PPP-B-2122 Base Document:1981 | BOX, FOLDING (PAPERBOARD, FOR ARCHIVAL MICROFICHE) |
| MIL-DTL-82965 Revision B:2001 | Propellant, gun, High Energy Nitramine |
| MIL-M-48767 Base Document:1975 | Methyl Formate (For Use In Ammunition) |
| ASTM C 668 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Transmission Pipe |
| MIL-V-24619 Base Document:1983 | VALVE, QUICK CLOSING, FOR SATURATED STEAM SERVICE |
| ASTM F 288 : 1996 : R2009 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| MIL C 22627 : 0 | COATING, CONFORMAL, RESIN |
| MIL-B-28514 Revision A:1983 | BOOTH, SPRAYING, PAINT (WITH EXHAUST SYSTEM) |
| DOD C 63976 : 0 | CASE, CARTRIDGE, 30MM, AMMUNITION FOR M788 M789 AND M799 SERIES OF 30 MM, AMMUNITION |
| MIL-P-70735 Base Document:1991 | PAPER, NITROCELLULOSE BASE FOR ARTILLERY PROPELLING CHARGES |
| MIL G 6162 : B | GENERATOR AND STARTER GENERATOR, ELECTRIC DIRECT CURRENT, NOMINAL 30 VOLTS AIRCRAFT GENERAL SPECIFICATION |
| MIL-S-85334 Base Document:1980 | SEALING COMPOUND, NONCURING LOW CONSISTENCY, SILICONE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS |
| GGG-L-795 Revision E:1990 | LUBRICATING UNIT, POWER OPERATED, AND PUMPING UNITS, PRESSURE LUBRICATING, DRUM MOUNTING |
| MIL C 71168 : 0 | CARTRIDGE, 7.62mm, M974 TRACER SHORT RANGE TRAINING AMMUNITION PERFORMANCE SPECIFICATION FOR |
| MIL-R-55242 Base Document:1963 | RADIO SET AN/GRC-109 () (UNITS OF) |
| DOD-A-17254 Revision A:1985 | ANCHORS, NAVY, LIGHTWEIGHT (HADFIELD MANGANESE CAST STEEL LOW MAGNETIC PERMEABILITY) |
| MIL-L-23398 Revision D:1985 | LUBRICANT, SOLID FILM, AIR DRYING, CORROSION INHIBITING, NATO CODE NUMBER S 749 |
| MIL E 82668 : B | EXPLOSIVES, CYCLOTOL, 25/75 AND 29/71, RDX/TNT |
| MIL-B-20467 Revision A:1974 | BOXBOARD (FOR USE IN AMMUNITION) |
| MIL-C-29107 Revision C:1989 | COAT, MANS POLYESTER/WOOL SUMMER |
| MIL C 81175 : D NOTICE 1 | CRANE, HYDRAULIC, WHEEL MOUNTED, 4 X 4 FULL REVOLVING, 15 TONS CAPACITY, DED |
| MIL-C-13720 Revision B:1983 | CLAMP, BEAM, CARGO LASHING |
| MIL-P-52650 Revision A:1975 | PLOTTING INSTRUMENT SET, STEREOPLOTTER, MULTIPLEX LABORATORY, PACKAGING OF |
| MIL-R-7575 Revision C:1966 | Resin, Polyester, Low-Pressure Laminating |
| MIL-P-43155 Revision F:1984 | PRINTING PLANT, SPECIAL WARFARE, TRANSPORTABLE, (LIGHTWEIGHT) MODEL 800 |
| FF-B-561 Revision D:1989 | BOLT, (SCREW), LAG |
| MIL-B-62346 Revision D:1994 | BATTERIES, STORAGE LEAD ACID (LOW MAINTENANCE) |
| MIL-S-29410 Revision B:1988 | SHELTER ASSEMBLY, RIGID GENERAL PURPOSE |
| L E 530 : A | ENVELOPE, TRANSPARENT |
| RR-P-00560 Base Document:1967 | POST, LEDGER AND BINDER, SCREW-TYPE |
| PPP-P-001944 Base Document:1976 | PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE |
| MIL-C-12475 Revision D:1968 | CHAIR, STRAIGHT, WITHOUT ARMS, WOOD |
| ASTM E 1977 : 2012-03 | SPECIFICATION FOR SHELTER, TACTICAL, EXPANDABLE, ONE-SIDE |
| ASTM A 519 : 2006 : R2012 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| MIL-C-3600 Revision E:1991 | COMPRESSOR, AIR AND GAS [EXCEPT OXYGEN] PACKAGING OF |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| MIL F 87260 : 0 | FOAM MATERIAL, EXPLOSION SUPPRESSION, INHERENTLY ELECTRICALLY CONDUCTIVE, FOR AIRCRAFT FUEL TANK & DRY BAY AREAS |
| MIL-A-52628 Revision B:1977 | ANCHOR, PROPELLANT EMBEDDED |
| MIL-STD-2077 Revision B:1991 | TEST PROGRAM SETS GENERAL REQUIREMENTS FOR |
| MIL-C-10578 Revision D:1982 | CORROSION REMOVING AND METAL CONDITIONING COMPOUND (PHOSPHORIC ACID BASE) |
| DOD D 24599 : 0 | DISSOLVED OXYGEN MEASUREMENT SYSTEM (NAVAL SHIPBOARD USE) (METRIC) |
| FFF-C-641 Revision D:1975 | SHAVING SOAP AND SHAVING CREAM |
| MIL-F-43310 Revision A:1970 | FELT SHEET, NYLON, NON-WOVEN (NEEDLE PUNCHED) |
| MIL-A-37491 Base Document:1976 | ATROPINE SULFATE OPHTHALMIC OINTMENT, USP |
| MIL C 23486 : B | COLLAR, COAT, MAN'S, WOOL, GABARDINE, BLUE |
| ASTM F 1312 : 1990 : R1997 | Standard Specification for Brick, Insulating, High Temperature Fire Clay |
| MIL-S-44091 Base Document:1982 | STRAP, CHIN, GROUND TROOPS - PARACHUTISTS HELMET |
| MIL-F-36747 Revision A:1975 | FLASK, ERYLENMEYER, GRADUATED PLASTIC |
| MIL-S-51173 Revision A:1964 | SERVICE UNIT, FLAME THROWER, TRUCK MOUNTED, M4A2 |
| MIL-B-13900 Revision D:1967 | BODY, IGNITION CYLINDER |
| MIL-F-50809 Base Document:1970 | FIBER, ACRYLIC, FIBRILLATABLE |
| MIL C 4710 : D | CASE SET, TRANSPORT AND STORAGE |
| MIL-S-52729 Base Document:1972 | SURVEYING SET, ASTRONOMIC POSITION, PACKAGING OF |
| MIL-B-43172 Revision E:1987 | BERET, MAN'S, WOOL |
| MIL F 62265 : A | FILTER ELEMENT AND RELIEF VALVE, FLUID PRESSURE, HYDRAULIC (M-60 TANK SERIES) |
| MIL-S-82529 Base Document:1968 | SWITCH, THERMAL MARK 56 MOD 1 |
| EE-I-1699 Base Document:1972 | ICE CREAM MIXES, REGULAR AND IMITATION, DEHYDRATION |
| QQ-B-650 Revision C:1987 | BRAZING ALLOYS, COPPER, COPPER ZINC, AND COPPER PHOSPHORUS |
| MIL R 83397 : A | RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT |
| MIL-A-23622 Base Document:1963 | ACTUATOR, AIRCRAFT, ELECTRO-MECHANICAL, LINEAR, DIRECT CURRENT |
| MIL-H-37082 Base Document:1974 | HYDROMETER, GRADUATED SCALE, Specific Gravity Range 1.196 to 1.286 |
| MIL-C-44235 Revision B:1994 | CAKES, CANNED, THERMOSTABILIZED, TRAY PACK |
| MIL-T-43654 Revision D:1991 | TROUSER, SNOW CAMOUFLAGE, WHITE ARCTIC |
| TT I 00549 : C NOTICE 1 | INK, WRITING, COLORED (NON-PERMANENT) |
| TT-W-572 Revision B:1969 | WOOD PRESERVATIVE: WATER-REPELLANT |
| MIL H 26633 : C | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, OXYGEN |
| MIL-P-50060 Base Document:1959 | PAPER, CONGO RED. |
| MIL-G-20587 Revision E:1973 | GLOVES, WIRE MESH, ENTIRE HAND |
| MIL P 50911 : A | PRIMING ASSEMBLY FOR DEMOLITION CHARGE ASSEMBLY M183 PARTS, LOADING, ASSEMBLY AND PACKING |
| MIL-F-21241 Base Document:1958 | FILTER, COLOR, FINISHED (FOR OPTICAL INSTRUMENTS) |
| PPP-H-1581 Revision A:1977 | HARDWARE (FASTENERS AND RELATED ITEMS) PACKAGING OF |
| GG-D-226 Revision E:1965 | DEPRESSOR, TONGUE, WOOD |
| MIL I 25725 : A | INDICATOR, TORQUE PRESSURE, MAGNESYN STYLE, SINGLE CLAMP MOUNTED, 2 IN SIZE, 50-400 PSI TYPE A-8 |
| DOD D 87934 : 0 | DESICCANT, MOLECULAR SIEVE (IMPREGNATED (METRIC) |
| MIL-B-37036 Revision A:1985 | BUR, DENTAL, FINISHING (TUNGSTEN CARBIDE) |
| L-C-001676 Base Document:1970 | CUSHION, CARPET AND RUG, VIRGIN URETHANE |
| O-C-430 Revision A:1975 | CLEANING COMPOUND, PAINT BRUSH |
| PPP-B-1055 Revision B:1975 | BARRIER MATERIAL, WATERPROOFED FLEXIBLE |
| MIL-T-37318 Base Document:1976 | TEST TUBE, 16 BY 135 MM SCREW CAP DISPOSABLE |
| MIL-I-51175 Base Document:1964 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMORED VEHICLE, AMBULANCE M37 |
| MIL-M-44479 Base Document:1994 | MEATBALLS IN BROWN GRAVY, THERMOSTABILIZED, TRAY PACK |
| MIL-B-87986 Base Document:1989 | BEAD BREAKER, PNEUMATIC TIRE |
| MIL-I-18804 Revision B:1964 | INDICATOR, VERTICAL SPEED, 0 - 6000 FPM, 2 INCH |
| MIL-C-85498 Base Document:1981 | CURING AGENTS DIMERYL-DI-ISOCYANATE AND ISOPHORONE DI-ISOCYANATE |
| QQ-T-580 Revision C:1977 | TOOL STEEL, CARBON AND CARBON VANADIUM |
| MIL-I-81548 Base Document:1967 | IGNITION ELEMENT, ELECTRIC, MARK 22 MOD 0 |
| MIL-C-85496 Base Document:1981 | CARBON BLACK |
| L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
| MIL-U-70457 Base Document:1983 | Uranium Tetrafluoride (UF4), Depleted |
| MIL-V-3 Revision E:1994 | VALVES, FITTINGS, AND FLANGES (EXCEPT FOR SYSTEMS INDICATED HEREIN); PACKAGING OF |
| TT-I-554 Revision A:1956 | INK, STAMP-PAD, RED, FOR PHOTOGRAPHIC PRINTS |
| MIL-B-543 Revision G:1990 | BUCKLE, TONGUELESS AND WEB STRAP |
| MIL-I-85889 Base Document:1988 | IGNITER, JET ASSISTED TAKE OFF (JATO) PROPULSION SYSTEM, GENERAL DEVELOPMENT SPECIFICATION FOR |
| GGG-W-644 Revision C:1992 | WRENCH, SOCKET (WHEEL NUT) |
| H-H-001193 Revision A:1971 | HAIRBRUSH, SYNTHETIC |
| MIL L 27639 : C (2) | LIFE PRESERVER INFLATING ASSEMBLY FLU-1A/P |
| MIL-P-24333 Base Document:1968 | PLASTIC MATERIAL, UNICELLULAR, SHEET, ELASTOMERIC |
| MIL C 83438 : 1986 | CLOTHING OUTFITS, EXTREME COLD WEATHER SURVIVAL |
| MIL-W-46646 Revision C:1966 | WARHEAD SECTION, 762-MILLIMETER ROCKET, CHEMICAL AGENT, M190, WITHOUT FUSE |
| MIL-T-12242 Revision A:1963 | TEST SET, TELEPHONE TS-716( )/U |
| PPP-B-1980 Base Document:1977 | BOARDS, BULLETIN AND CONTROL, PACKAGING AND PACKING OF |
| MIL T 55095 : 0 | TEST SET, SERVO MODULATOR |
| L-P-512 Revision C:1977 | PLASTIC SHEET (SHEETING); POLYETHYLENE |
| MIL-E-50069 Revision B:1964 | EYERING, FIELD PROTECTIVE MASK, C4. |
| MIL-C-11198 Revision K:1984 | CHEST, ICE STORAGE |
| MIL-W-20553 Revision D:1976 | WAX, DESENSITIZING |
| MIL-T-83043 Revision A:1974 | T-SHIRT, ATHLETIC, AIR FORCE |
| AASHTO M 55M/M 55 : 2013 | METHOD OF TEST FOR STEEL WELDED WIRE REINFORCEMENT, PLAIN, FOR CONCRETE |
| MIL-M-10452 Revision C:1984 | MONOCHLOROACETIC ACID, TECHNICAL |
| MIL L 46225 : C | LEAD AZIDE RD-1333 (FOR USE IN AMMUNITION) |
| A-A-59892 Revision A:2013 | Cover-Cargo-HEMTT-Truck |
| MIL-A-37480 Base Document:1976 | AMPICILLIN FOR ORAL SUSPENSION, USP |
| MIL-H-29101 Revision B:1981 | HOOD, EXTREME COLD WEATHER, IMPERMEABLE |
| MIL T 22922 : B | TIMING PANEL ASSEMBLY (TORPEDO KM 44 MOD1) |
| MIL-P-3756 Revision D:1980 | PROTRACTOR, ONE ARM SEMICIRCULAR [CORROSION RESISTANT ALLOY WITH CAE] |
| MIL-G-21032 Revision D:1972 | GASKET, METALLIC ASBESTOS, SPIRAL WOUND (FORASA COMMERCIAL) SHOW 115 5 |
| MIL-C-22912 Revision B:1970 | CONTROLLER, STEERING (FOR TORPEDO MARK 37 MOD 2) |
| MIL-S-26547 Revision C:1985 | STARTER-GENERATOR ENGINE STU-6A |
| MIL-P-7206 Revision B:1970 | POWER SUPPLY, SILICON RECTIFIER TYPE B 8 |
| MIL-C-47138 Base Document:1965 | COATING, POLYVINYL CHLORIDE |
| HH P 1784 : NOTICE 1 | PAPER, ASBESTOS |
| MIL-A-47062 Base Document:1974 | AMINO PROPYL ALKYL AMINE |
| MIL-M-6404 Revision A:1965 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT LIQUID, TYPE F 1 AIRCRAFT FUEL 300 GALLONS PER MINUTE |
| DOD P 24648 : 0 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| MIL-D-6055 Revision D:1987 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE [CAP FROM 88 TO 510 CUBIC INCHES] |
| GGG-C-406 Revision D:1975 | CLAMP AND HAND SCREWS |
| MIL-O-39021 Revision A:1970 | OVEN, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-B-36630 Base Document:1970 | BOX, MICROSCOPE SLIDE, PLASTIC, 5 SLIDE |
| MIL-I-37668 Base Document:1977 | IOPANOIC ACID TABLETS, USP |
| MIL-A-36080 Revision C:1965 | ANESTHESIA SET, ENDOTRACHEAL |
| MIL-M-51113 Revision D:1986 | MASK, CHEMICAL BIOLOGICAL, AIRCRAFT, ABC-M24 |
| MIL I 7203 : A | INDICATOR, RATE OF FLOW, FUEL, SYNCHRO STYLE, TYPE A-20 |
| MIL-B-3630 Revision D:1983 | BATCHING PLANT, AGGREGATE MOBILE, THREE-COMPARTMENT, 60-TON CAPACITY |
| MIL-T-83720 Base Document:1968 | TRANSFORMER AND INDUCTORS, NONEXPLOSIVE, GENERAL SPECIFICATION FOR |
| MIL-S-6785 Revision D:1955 | SOLENOID, REMOTE GUN FIRING, TYPE G 9B |
| MIL-A-81253 Base Document:1965 | ADHESIVE, MODIFIED EPOXY RESIN WITH POLYAMINE CURING AGENT |
| MIL-B-43177 Revision B:1977 | BALING PRESSES |
| MIL-A-49180 Base Document:1978 | ALARM DETECTOR ID-1974 ()/PPS-5 |
| GGG-V-415 Revision A:1967 | VISE, PIPE |
| GG-S-328 Revision B:1958 | SHIELDS, EYE SURGERY |
| MIL-C-60538 Base Document:1966 | CANISTER, 90MM, M336 METAL PARTS ASSEMBLY |
| MIL I 38135 : B (3) | INDICATOR, INDICATED AIRSPEED AVU 19/A STANDBY |
| FF-L-2890 Revision A:2004 | LOCK EXTENSIONS (PEDESTRIAN DOOR LOCK ASSEMBLY PREASSEMBLED, PANIC AND AUXILIARY DEADBOLT) |
| MIL-DTL-44132 Revision C:2000 | VEST, CONDITIONING MICROCLIMATE: AIR |
| MIL-M-19261 Base Document:1956 | METER, POWER FACTOR 4-1/2 INCH, SWITCHBOARD TYPE |
| MIL-L-17699 Base Document:1953 | LEAD 2-ETHYL HEXOATE |
| MIL-G-85088 Base Document:1978 | |
| P-P-200 Revision D:0197 | PEN CLEANER, LIQUID |
| GG-R-001200 Base Document:1986 | INTERIM FEDERAL SPECIFICATION - RULER, PLASTIC, DESK |
| MIL B 002619 : B | BAG, PATIENT'S, EFFECTS |
| MIL-D-52665 Base Document:1969 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, PHOTOMAPPING COMPANY, PACKAGING OF |
| MIL F 0040048 : B INT (1) | FLAGSTAFFS AND INSIGNIA, FLAGSTAFF HEADS, GENERAL SPECIFICATION FOR |
| MIL-R-50068 Revision A:1964 | RING, CRIMPING (FOR ABC-M17 MASK) |
| MIL-N-634 Revision C:1977 | NAVIGATOR, PLOTTING INSTRUMENT SET AND PLOTTING INSTRUMENTS |
| MIL F 52525 : D | FITTING, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP HALVES, GENERAL SPECIFICATION FOR |
| MIL-N-85615 Base Document:1986 | Nut, Sealing, Self-Locking, 250 Degrees F, 450 Degrees F General Specification For |
| GG-B-00596 Revision B:1970 | BOUGIE, EUSTACHIAN, SET OF FIVE |
| MIL-S-36230 Base Document:1964 | SLEEVE, PLASTIC, HISTOPATHOLOGICAL SPECIMEN |
| MIL-O-55593 Base Document:1969 | OVEN ASSEMBLY, WITH QUARTZ CRYSTAL UNITS, GENERAL SPECIFICATION FOR |
| MIL-B-60075 Revision A:1966 | BOMB, NONPERSISTENT GAS, SPHERICAL, 4.5 INCH, M139; METAL PARTS |
| O-C-940 Revision B:1975 | CYCLOHEXYLAMINE, TECHNICAL |
| ASTM E 2463 : 2011 : REDLINE | PERFORMANCE SPECIFICATION FOR CARGO BED COVER (CBC) M105A2 TRAILER, TYPE 2 |
| MIL-S-38430 Base Document:1965 | SLEEPING BAG CONTAINER, PARACHUTE BAILOUT SRU 15 P |
| MIL-P-6063 Revision B:1978 | PACKAGING OF BATTERIES, STORAGE, CHARGED AND DRY UNCHARGED AND MOIST, GENERAL SPECIFICATION FOR |
| MIL-H-36364 Revision B:1990 | HOLDER, RADIAC DETECTING ELEMENT, FILM BADGE TYPE |
| MIL-M-26696 Base Document:1959 | MAGNESIUM ALLOY BAR, ROD AND SPECIAL SHAPED SECTIONS EXTRUDED (P)ZK6OB |
| MIL-V-48773 Base Document:1975 | Vanadium Pentoxide (For use in Ammunition) |
| MIL E 85113 : 0 | EXPLOSIVE, PLASTIC BONDED EXTRUDABLE POWER, PBXC-203(1) |
| MIL-F-21346 Revision B:1976 | FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR |
| GG-N-00195 Revision B:1972 | NEEDLE, HYPODERMIC, BLOOD COLLECTING, DOUBLE-POINTED, DISPOSABLE |
| NNN T 792 : A NOTICE 1 | TUBE DRYING LABORATORY |
| MIL B 44054 : B | BOTTLE: OIL SAMPLE; WITH CONTAINER, NONAERONAUTICAL |
| A-A-3186 Base Document:2002 | FILE CABINETS, VERTICAL, STEEL |
| AA-F-00360 Revision B Interim Revision:2002 | FILING CABINETS, STEEL, MAP AND PLAN, (SECTIONAL) |
| MIL-C-20079 Revision H:1987 | CLOTH, GLASS; TAPE, TEXTILE GLASS; AND THREAD, GLASS AND WIRE-REINFORCED GLASS |
| L-P-1036 Revision A:1974 | PLASTIC ROD, SOLID: PLASTIC TUBES AND TUBING, HEAVY WALLED: POLYVINYL CHLORIDE, RIGID |
| MIL-C-3993 Revision C:1962 | COPPER AND COPPER-BASE ALLOY MILL PRODUCTS; PACKAGING OF |
| MIL-I-46838 Revision B:1981 | INSULATING COMPOUND, ELECTRICAL, SILICONE RUBBER, ROOM TEMPERATURE VULCANIZING |
| MIL-STD-490 Revision A:1985 | SPECIFICATION PRACTICES |
| MIL-A-27015 Base Document:1960 | ADAPTER, TEST TS-1371/GWM-4 |
| MIL T 4 : L | TIRES & INNER TUBES (NON-AIRCRAFT) - PACKAGING OF |
| MIL-B-43401 Base Document:1966 | BOWL, BAPTISMAL |
| QQ-T-570 Revision C:1977 | TOOL STEEL, ALLOY |
| MIL-M-71074 Revision A:1995 | MODEM, VEHICLE MOTION SENSOR: 12561737 |
| MIL-S-10385 Revision F:1979 | SANDTRAP ASSEMBLY [FOR PORTABLE 6 INCH PETROLEUM PIPELINE |
| MIL G 8360 : A | GAGE, PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE, 10-75 IN MERCURY TYPE MB 1 |
| GGG-F-00626 Revision A:1994 | FORK, STONE, HAND, D-HANDLE |
| TT-S-222 Revision B:1967 | SEALING COMPOUND, ASBESTOS |
| MIL-A-7292 Revision A:1952 | ANTENNA AT-190B/AP |
| MIL-A-25081 Base Document:1955 | AMPLIFIER, ELECTRONIC CONTROL, 2 CHANNEL, APPROACH AND NAVIGATIONAL, TYPE MB-4 |
| MIL-H-6439 Revision A:1952 | HOSE RUBBER AIRCRAFT PAINT FINISH REMOVER |
| ASTM A 805/A805M : 2009 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| MIL-A-47317 Base Document:1987 | ADHESIVE, AIR DRYING, SILICONE RUBBER |
| MIL-T-5684 Revision B:1981 | TIE RODS; ROUND AND SQUARE, AIRCRAFT |
| MIL-D-38386 Revision E:1989 | DUCT ASSEMBLY, GROUND, CONDITIONED AIR, INSULATED, FLEXIBLE |
| DOD-C-24594 Base Document:1979 | CELL, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DEEP SUBMERGENCE APPLICATIONS) (METRIC) |
| MIL B 003473 : A | BEAD, LABORATORY, GLASS |
| AA-S-00275 Base Document:1964 | SHELVING, STORAGE AND DISPLAY, STEEL, BOLTLESS |
| MIL C 27019 : B | CARTRIDGE KIT, BOMB EJECTION MLU-9/B |
| MIL-B-28599 Revision C:1988 | BAG, LINEMAN'S GLOVE |
| GGG-W-648 Revision B:1992 | Wrench, Lineman\'s |
| MIL-S-85333 Base Document:1979 | SAFETY ARMING DEVICE MARK 33 MOD 1 |
| NASA KSC STD Z 0007 : 1973 | DESIGN OF HYDROCARBON FUEL GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| MIL-B-2766 Revision C:1987 | BATTING, FIBROUS GLASS, LIFESAVING EQUIPMENT |
| KKK-T-654 Revision D:1985 | TRUCK, DOLLY (ROLLER) |
| MIL-G-82455 Base Document:1966 | Generator, Gas |
| MIL-G-16408 Revision B:1953 | GAGE, LIQUID LEVEL, TAPE AND FLOAT, DIRECT READING (FOR SHIPBOARD USE) |
| MIL-C-53109 Base Document:1990 | CAN, FUEL, MILITARY, PLASTIC, 5 GALLON CAPACITY |
| MIL-M-38761-2 Revision A:1990 | MICROFILMING AND PHOTOGRAPHING OF ENGINEERING/TECHNICAL DATA AND RELATED DOCUMENTS, PCAM CARD PREPARATION, ENGINEERING DATA MICRO-REPRODUCTION SYSTEM, GENERAL REQUIREMENTS FOR, PREPARATION OF |
| MIL-B-19906 Revision A:1961 | BOMB RACK AND ROCKET LAUNCHER, COMBINATION, AERO 15 SERIES |
| MIL-DTL-46077 Revision G:2006 | ARMOR PLATE, TITANIUM ALLOY, WELDABLE |
| MIL-P-60463 Revision B:1974 | PROPELLANT POWDER (FOR USE IN BASE GRAIN OGK) |
| MIL-S-29412 Revision C:1994 | SHELTER, COMPLEXING KIT FOR |
| MIL-P-46112 Revision B:1977 | PLASTIC SHEET & STRIP, POLYMIDE |
| NNN-T-580 Base Document:1963 | TONG LABORATORY |
| NASA MSFC SPEC 164 : 2010 | CLEANLINESS OF COMPONENTS FOR USE IN OXYGEN, FUEL, AND PNEUMATIC SYSTEMS, SPECIFICATION FOR |
| MIL-R-21530 Revision D:1962 | RESOLVERS, ELECTRICAL, AC FOR USE IN POLARIS FLEET BALLISTIC MISSILE WEAPON SYSTEM GENERAL SPECIFICATION FOR |
| MIL-M-5793 Revision A:1954 | MICROPHONE M-3A/A |
| MIL-C-82576 Base Document:1973 | CABLE ASSEMBLY, TEST (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| WW-P-404 Revision D:1973 | PIPE, STEEL (SEAMLESS & WELDED, BLACK & ZINC COATED) (GALVANIZED) |
| MIL C 46883 : 0 | COATING, OPTICAL BLACK |
| MIL-A-23282 Revision B:1965 | ACTUATOR |
| MIL-S-83315 Base Document:1971 | SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY |
| MIL-L-21652 Revision A:1964 | Light, Beacon, Anticollision, Aircraft, General Specification for |
| GG-B-00686 Revision D:1973 | BROACHES, PULP CANAL, BARBED, DENTAL |
| MIL C 63013 : D | CATALOGS, SUPPLY: SETS, KITS AND OUTFITS |
| MIL S 9479 : C | |
| MIL L 61002 : 0 | LABELS, PRESSURE-SENSITIVE ADHESIVE, FOR BAR CODES AND OTHER MARKINGS |
| MIL-P-270 Revision A:1959 | PROPELLANT ARTILLERY |
| MIL T 49081 : NOTICE 2 | TELEPHONE CIRCUIT, LINE RELAY TA-452(24/GTA-14 |
| MIL-H-27614 Revision A:1971 | Hood, Rocket Fuel Handlers, HGU-11/P (No S/S Document) |
| MIL-C-1258 Revision D:1983 | CUP, OIL, LUBRICATING AND OILERS, SELF-FEEDING |
| GGG-P-00335 Revision A:1970 | PIKE POLE |
| MIL-D-50006 Base Document:1958 | DIPHENYLPTHALATE (TECHNICAL) |
| KK-L-291 Revision G:1969 | LEATHER, CATTLEHIDE, UPHOLSTERY |
| MIL P 36722 : C | PIPET, VOLUMETRIC, MICRO |
| MIL A 28619 : C | ANCHOR, STATO MOORING, 2OO TO 15,OOO POUNDS |
| MIL-A-19401 Base Document:1956 | Actuator, Electromechanical, Rotary, for AS-473/ASB-1 (Buord Drawing 790459, 1332290, Azimuth Torque Amplifier) |
| MIL-C-3761 Base Document:1952 | CLOTH, SILK [FOR AMMUNITION PARACHUTES] |
| NASM 23460 : 2004 | PIN, QUICK-RELEASE, SELF-RETAINING, POSITIVE-LOCKING |
| MIL-S-50005 Revision A:1969 | STANNIC OXIDE, TECHNICAL |
| MIL-A-3850 Base Document:1952 | ACETYLENE BLACK |
| TT-R-248 Revision B:1981 | REMOVER, PAINT AND LACQUER, SOLVENT TYPE |
| MIL-L-50096 Revision A:1963 | LABORATORY, PETROLEUM, BASE |
| MIL L 52962 : 0 | LACQUER, CHLOROSULFONATED POLYETHYLENE, CAMOUFLAGE, LUSTERLESS |
| MIL-I-7444 Revision D:1984 | INSULATION SLEEVING, ELECTRICAL FLEXIBLE |
| MIL S 29580 : B | SPECTACLES, AVIATOR'S, MULTIPLE WAVE LENGTH LASER PROTECTIVE, EDU 5 P (WITH CASE) |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| MIL T 43902 : 0 | TORTILLAS, TACO SHELLS AND CHALUPAS |
| MIL-M-83524 Base Document:1985 | MICROSCOPE, OPTICAL, MONOCULAR, HAND-HELD, PORTABLE, MILITARIZED, 200X MAGNIFICATION, FOR FIELD INSPECTION OF OPTICAL FIBERS |
| MIL-B-37405 Base Document:1976 | BEAKER, LABORATORY, CONICAL, POLYSTYRENE, DISPOSABLE |
| MIL W 43334 : B | WEBBING AND TAPE, TEXTILE, PACKAGING AND PACKING OF |
| MIL-B-16305 Revision B:1964 | BRICK, REFRACTORY, INSULATING |
| MIL-G-14106 Revision B:1979 | GENERATOR, DIRECT CURRENT, G-43 ()/G (HAND CRANKED) |
| MIL-B-18-51 Revision D:1985 | BATTERY, DRY, BA-223/U |
| MIL-H-21722 Revision B:1992 | HOOK, THRUST STABILIZING, JATO-45OO POUNDS NOMINAL THRUST |
| MIL T 6349 : C NOTICE 1 | TEST SET, SYNCHRO |
| MIL C 82296 : B | COVERALL, MICROWAVE RADIATION PROTECTIVE |
| MIL-T-36989 Revision A:1978 | TUBE, SPECIMEN, PINWORM |
| MIL-I-26689 Revision C:1981 | INDICATOR, HORIZONTAL SITUATION, AQU-2/A |
| GGG-S-283 Revision A:1967 | SHEARS, METAL CUTTING, PNEUMATIC (PORTABLE) |
| MIL-I-11489 Revision E:1976 | INSECT NET, HEAD |
| MIL-I-58067 Revision A:1977 | INDICATOR, VERTICAL VELOCITY, RAPID RESPONSE ACCELERATION SENSITIVE, GENERAL SPECIFICATION FOR |
| MIL-B-24911 Base Document:1983 | BOOT, SAFETY, AIRCREW |
| MIL-C-52669 Base Document:1969 | COPY AND SUPPLY SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| DOD-B-53061 Base Document:1985 | BELTS, V: POLYURETHANE |
| MIL-C-1453 Revision G:1990 | CHAIN, DOG, WITH SNAPHOOK |
| MIL-C-83360 Revision C:1975 | CLEANING AND LUBRICATING COMPOUND, ELECTRICAL CONTACT |
| MIL-B-36633 Base Document:1970 | BONE SURGERY SET, EXTENSION AND TRACTION, PIN TYPE, STEINMANN |
| AA-C-295 Revision A Interim Revision:1963 | CHAIRS, ROTARY, STEEL, TUBULAR SPECIAL PURPOSE |
| MIL-H-36973 Base Document:1973 | HOLDER, LABORATORY NEEDLE, INNOCULATING KOLLE, 10 INCH |
| MIL-B-43143 Revision E:1986 | BEEF PATTIES, DEHYDRATED, UNCOOKED |
| HH-M-351 Revision E:1976 | MILLBOARD, ASBESTOS |
| MIL-T-10086 Revision H:1980 | TANK, LIQUID STORAGE, METAL, VERTICAL, BOLTED |
| MIL C 12520 : C | CONNECTOR, PLUG AND RECEPTACLE (ELECTRICAL, WATERPROOF), AND ACCESSORIES: GENERAL SPECIFICATION FOR |
| SS-T-312 Revision B:1974 | TILE, FLOOR, ASPHALT, RUBBER, VINYL, VINYL-ASBESTOS |
| MIL-B-44134 Base Document:1984 | BODY ARMOR, SMALL ARMS (HAND GUN) PROTECTIVE, UNDERGARMENT, MP-1 |
| MIL-F-50044 Base Document:1959 | FILTER, PARTICULATE, 1,200 CFM, C19 |
| MIL-Y-16654 Revision D:1973 | YARN, WOOL |
| MIL-B-37523 Base Document:1976 | BOTTLE SET, PHYSICIAN'S SATCHEL |
| MIL-I-51072 Revision C:1979 | INSTALLATION KIT, GAS-PARTICULATE FILTER UNIT, ARMOURED VEHICLE, M20A1 |
| MIL B 17896 : C | |
| MIL-L-43579 Revision C:1982 | Liner, Trousers, Chemical Protective (No S/S Document) |
| MIL-B-83277 Revision A:1975 | BOOTS, FLYERS FWU-8/P |
| MIL-B-3743 Revision D:1967 | BRUSH, ELECTRICAL CONTACT |
| MIL-G-52903 Revision A:1985 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 10 KW, 60 HERTZ, PU-753/M |
| MIL-J-43470 Revision B:1982 | JACKET, AIR TO GROUND IDENTIFICATION |
| MIL-M-27386 Revision D:1979 | MANIFOLD ASSEMBLIES, HOSELINE, FUELING, 4-INCH QUICK COUPLING TYPE |
| MIL-T-13020 Revision C:1971 | TAPE, RUBBER UNVULCANIZED, SPLICING AND MOLDING (TAPES TO-317/U & TL-318/U). |
| MIL-R-11521 Revision G:1993 | RING, EXPANSION, HOSE, BRASS |
| MIL-B-37016 Revision A:1973 | BOX, PLASTIC, INSULATED, MEAT AND DAIRY PRODUCTS, LABORATORY SAMPLE |
| MIL C 83281 : NOTICE 1 | COATING, PHOTOTROPIC, DETECTION OF DEFECTS ( IN MATERIALS AND STRUCTURES ) |
| GG-F-00340 Revision A:1966 | FILIFORMS; URETHRAL, WOVEN (BRAIDED) |
| MIL F 15733 : G | FILTERS & CAPACITORS, RADIO FREQUENCY INTERFERENCE |
| MIL-B-2029 Revision F:1983 | BURNER ASSEMBLY, SPACE HEATER |
| MIL-B-36829 Revision A:1978 | BUR, DENTAL, EXCAVATING, ENDODONTICS |
| MIL C 8783 : A | CLAMP, HOSE, FLAT BAND 500 DEG. F |
| MIL-B-37074 Revision A:1974 | BOTTLE, SAFETY CAP, GLASS, LIGHT-RESISTANT, PRESCRIPTION |
| O-L-160 Revision A:1967 | LEAK PREVENTIVE COMPOUND, RADIATOR |
| GGG-S-001333 Revision A Interim Revision:1975 | SCRAPER AND SQUEEGEE, VEHICLE WINDOW |
| MIL-I-43639 Revision A:1971 | INK, MARKING, NAMETAPE |
| MIL-P-44412 Base Document:1990 | PACK, PARACHUTISTS, STINGER MISSILE |
| NNN-G-692 Revision C:1970 | GRADUATE LIQUID LABORATORY AND PHARMACEUTICAL GLASS |
| MIL A 22641 : D | ADAPTOR, COAXIAL TO WAVEGUIDE, GENERAL SPECIFICATION FOR |
| MIL-C-14637 Revision A:1982 | CASE, FLAG, INTERMENT |
| MIL-A-36051 Revision A:1973 | |
| MIL-A-55512 Revision A:1969 | ADAPTOR, CONNECTOR UG-1312 ()/U |
| MIL-B-38951 Revision A:1964 | BOMB, LOADING PRACTICE BDU-32/E |
| MIL-A-36163 Base Document:1963 | AIRWAY, PHARYNGEAL, RUBBER |
| PPP-P-1882 Base Document:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR TEMPLATES, TRIANGLES, CURVES, PROTRACTORS AND RELATED DRAFTING AIDS |
| MIL-T-12756 Revision A:1959 | TEST SET, BATTERY TESTER TS-183()/U |
| MIL C 1213 : E | CUPS, GREASE |
| GG-S-743 Revision C:1975 | STAND, SURGICAL INSTRUMENT |
| MIL-B-44478 Base Document:1994 | BEANS WITH RICE AND BACON, THERMOSTABILIZED, TRAY PACK |
| MIL-M-81999 Revision A:1977 | Molding Compound, Reversion Resistant, Non-Carcinogen Curing Polyurethane, Aircraft Structure |
| MIL M 11101 : C NOTICE 1 | MICROPHONES, DYNAMIC |
| DD-G-511 Revision E:1983 | GLASS, TUBING, ROUND |
| MIL-W-52874 Revision B:1983 | WATER QUALITY ANALYSIS SET, ENGINEER |
| EE-C-002141 Base Document:1982 | CAKES, CANNED, THERMOSTABILIZED, TRAY PACK |
| MIL-R-28894 Base Document:1986 | RELAY, HYBRID OR SOLID STATE, SENSORS, ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-P-15037 Revision E:1965 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS CLOTH, MELAMINE RESIN |
| MIL-B-286 Revision D:1987 | BUTTONS, TACK; AND TACK, BUTTON |
| MIL-M-52793 Base Document:1974 | MULTIMETER, BATTERY TESTING, 0 TO 35 AMP, 0 TO 10 VOLT |
| MIL-C-47150 Base Document:1974 | COMPOUND, COATING, PORCELAIN FOR POTTING ELECTRONIC COMPONENTS |
| WW-C-1692 Revision A:1973 | COUPLING ASSEMBLY AND MENDER, HOSE, HOSE (PLASTIC AND RUBBER) |
| AA-B-00540 Revision D Interim Revision:1978 | BOOKCASE SECTIONS, BASE AND TOP, STEEL, CONTEMPORARY STYLE |
| MIL-C-36858 Revision A:1978 | |
| L-P-370 Revision C:1972 | PLASTIC FILM, SHEET AND STRIP (POLYVINYL CHLORIDE, COPOLYMER OF VINYLIDENE CHLORIDE AND VINYL CHLORIDE, OR POLYETHYLENE) |
| GG-C-00620 Revision F:1976 | COUNTER, RECIPROCATING, HAND HELD |
| MIL-A-3327 Revision A:1993 | ARCH SUPPORT |
| MIL-C-55243 Base Document:1963 | CONNECTOR, PLUG AND RECEPTACLE, ELECTRICAL, QUICK CONNECT AND DISCONNECT, 12 CONTACTS MEDIUM POWER |
| GGG-P-00340 Revision A Interim Revision:1967 | PIN STRAIGHTENER, ELECTRON TUBE |
| GG-C-1969 Revision A:1976 | CURETTE, MASTOID, SPRATT |
| MIL P 19468 : A | PLASTIC RODS, POLYTETRAFLUOROETHYLENE, MOLDED & EXTRUDED |
| MIL-F-51095 Revision B:1964 | FILTER MATERIAL, GAS AEROSOL, C18R1 |
| MIL-B-13501 Revision D:1991 | BEARINGS AND BUSHINGS, BRASS AND BRONZE, MACHINED OR FORMED |
| MIL-S-51141 Revision A:1967 | SUIT, PROTECTIVE, IMPERMEABLE, SUPPLIED AIR, M4 |
| MIL-S-11578 Revision D:1978 | SHAKING MACHINE, TESTING SIEVE, LABORATORY, PORTABLE, HAND OPERATED, CAPACITY 6 FULL HEIGHT OR 13 HALF HEIGHT 8 INCH STANDARD SIEVES |
| PPP P 700 : C NOTICE 1 | PROTECTOR, PACKING LIST |
| JJ-B-00178 Revision C:1957 | BELTS, ROUND, DENTAL ENGINE |
| MIL-B-3461 Revision G:1979 | BUTTON, INSIGNIA, METAL, UNIFORM AND CAP |
| MIL-S-37073 Base Document:1974 | STAND, DISTILLING APPARATUS, LABORATORY |
| MIL-S-44385 Base Document:1989 | SUIT, PARACHUTISTS, ROUGH TERRAIN |
| MIL C 70663 : B | CARTRIDGE, CALIBER .50, SLAP (SABOTED LIGHT ARMOR PENETRATOR) - XM903 |
| MIL-A-43316 Revision A:1967 | ADHESIVE, PATCHING FOR CHLOROPRENE COATED OR CHLOROSULPHONATED POLYETHYLENE COATED FABRICS |
| ASTM C 222 : 1997 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM F 2191 : 2002 | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| MIL C 22244 : D | CARTRIDGE, IMPULSE, MARK 23 MOD O |
| MIL-C-10758 Revision D:1969 | CHEMICAL AGENT, GB |
| MIL-S-50786 Revision G:1993 | SKID BASE WOOD, FOR UNITIZATION OF BOXED AMMUNITION |
| MIL-P-19644 Revision C:1970 | PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD) |
| MIL-I-12718 Revision F:1985 | INSIGNIA, DISTINGUISHING, ARMY AND AIR FORCE, WOVEN |
| GGG-P-453 Revision A:1965 | PLATE, SURFACE, CAST IRON |
| DDD-P-52 Base Document:1959 | PAD, CLOTH, COPPER SULFATE IMPREGNATED |
| GGG-D-00643 Revision A Interim Revision:1968 | DRIFTPIN (DOUBLE TAPER) |
| MIL-A-23948 Base Document:1964 | AMMONIUM PERCHLORATE SPECIAL COARSE GRADE FOR SOLID PROPELLANT GRAINS |
| MIL S 18737 : 0 | SIGNAL LIGHT, PISTOL CARTRIDGE, MK 2 (WHITE) MK 2 (GREEN, & MK 2 (RED) |
| MIL-I-81508 Base Document:1966 | INDICATOR PLUG, FOR MISSILE PROPELLANTS |
| GGG-C-2773 Base Document:1992 | CYLINDER RECONDITIONING & CORRECTION EQUIPMENT - PORTABLE |
| MMM-A-260 Revision C:1984 | ADHESIVE WATER RESISTANT (FOR SEALING WATERPROOFED PAPER) |
| MIL-T-81587 Revision A:1971 | TIMER ASSEMBLY RAIN REPELLENT |
| MIL-R-82664 Base Document:1977 | RESIN, EPOXY, LOW VISCOSITY |
| MIL P 60077 : A | PROJECTILE, 155 MILLIMETER HOWITZER, M121A1, VX FILLED, WITHOUT FUZE AND BURSTER |
| GGG-B-461 Revision A:1966 | BLOCKS, STEP, MACHINISTS' |
| MIL-C-12051 Revision B:1969 | CHEMICAL AGENT, MUSTARD, DISTILLED (HD) |
| MIL-A-11356 Revision F:1987 | ARMOR, STEEL, CAST, HOMOGENEOUS, COMBAT-VEHICLE TYPE (1/4 TO 8 INCHES, INCLUSIVE) |
| GGG-V-445 Revision A:1966 | VICE, WOODWORKER'S AND PATTERNMAKER'S |
| EE-M-131 Revision G:1979 | MAYONNAISE AND SALAD DRESSING |
| MIL-F-63463 Base Document:1979 | FILM, INHIBITING, ETHYL, CELLULOSE |
| DOD-B-24541 Revision A:1982 | BATTERY CELLS AND ELEMENTS, LEAD-ACID, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC) |
| MIL-B-85643 Base Document:1987 | BITS, SCREWDRIVER, RIBBED GENERAL SPECIFICATION FOR |
| MIL-S-18655 Revision C:1971 | SIGNAL, SMOKE AND ILLUMINATION, MARINE MK 13, MOD 0 |
| MIL-T-63466 Base Document:1981 | THIONYL CHLORIDE (FOR USE IN AMMUNITION) |
| MIL-P-82530 Base Document:1968 | PRIMER, ELECTRIC MARK 137 MOD 0 |
| MIL-B-36212 Revision A:1974 | BARIUM HYDROXIDE LIME, USP |
| MIL-R-38987 Base Document:1972 | RADIAC SET AN/PDR-69 |
| U-I-530 Base Document:1956 | INTRAVENOUS SOLUTIONS; 1000 MILLILITRE CONTAINER |
| MIL-F-81739 Base Document:1969 | FUZE FLARE MK 364 MOD 0 |
| MIL-L-396 Revision E:1975 | LACES, LEGGINGS |
| MIL-C-23333 Revision B:1969 | CARTRIDGE, IMPULSE, MARK 38 MOD O |
| MIL-W-60305 Revision A:1969 | WARHEAD, 2.75 INCH ROCKET, SMOKE, WP, M156 (WITH BURSTER AND FUSE) |
| MIL-P-48239 Base Document:1973 | POWDER, PHOTOFLASH |
| MIL-M-60079 Revision C:1973 | MOTOR ASSEMBLY, BELLOWS |
| MIL-F-23138 Base Document:1960 | FLARE, TRACKING, MARK 23 MOD O |
| MIL-R-12499 Revision C:1967 | REPAIR EQUIPMENT, PNEUMATIC TARGET, PACKAGING OF |
| MIL-S-11141 Revision F:1969 | SMOKE POT, OIL, SGF2, M6 |
| MIL-C-43157 Base Document:1963 | CLOTH, SPUN VISCOSE RAYON RESIN IMPREGNATED |
| QQ-B-575 Revision C:1993 | BRAID, WIRE, (COPPER, TIN COATED, OR SILVER COATED, TUBULAR, OR FLAT) |
| MIL T 82535 : (1) NOTICE 1 | TIMER, INTERVAL, MARK 11 MOD 2 (ASSEMBLY) |
| MIL-D-85866 Base Document:1990 | DELAY COMPOSITION, Z-1 |
| MIL-C-11954 Revision A:1952 | CONTAINER; FOR FLOATING SMOKE POT |
| MIL P 82646 : A | PLASTIC FILM, CONDUCTIVE, HEAT-SEALABLE, FLEXIBLE |
| MIL-H-10120 Revision E:1964 | |
| MIL T 55069 : C NOTICE 1 | TRAINING AID, MODEL BRIDGE, FLOATING ALUMINUM, HIGHWAY TYPE, DECK BALK SUPERSTRUCTURE ON PNEUMATIC FLOATS |
| MIL-B-6038 Revision A:1961 | BEARING, BALL BELLCRANK, ANTI FRICTION, AIRFRAME |
| MIL-A-50210 Base Document:1968 | ACID, MIXED (FOR USE IN NITRATION OF EXPLOSIVES) |
| MIL-S-85354 Base Document:1980 | SWITCH INERTIA, FUZE |
| GG-S-1340 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY GRAVITY AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL C 15198 : A | CALCIUM CARBONATE, PRECIPITATED (PIGMENT) |
| MIL-P-18887 Base Document:1955 | PISTOL, DEPTH CHARGE, MARK 6 MOD 2 |
| MIL-P-10398 Revision C:1982 | PHOSPHORUS TRICHLORIDE, TECHNICAL |
| MIL S 19491 : G | SEMICONDUCTOR DEVICE, PACKAGING OF |
| MIL-C-46237 Base Document:1960 | CARTRIDGE, AIRCRAFT EJECTION SEAT, CATAPULT, M30A1 |
| MIL A 18924 : 0 | ARMING CELLS MK 1 MODS 5, 6, 7, AND 8. |
| MIL-W-14624 Base Document:1957 | WATCH, POCKET, (60 SECONDS DAILY RATE), GRADE 3 |
| ZZ-T-381 Revision Q:1989 | TIRES, PNEUMATIC, VEHICULAR (HIGHWAY) |
| MIL H 24653 : 0 | HASP, HIGH SECURITY, SHROUDED FOR SHIPBOARD DOORS AND HATCHES USING HIGH AND MEDIUM SECURITY PADLOCK |
| MIL-P-82494 Base Document:1967 | PACK ASSEMBLY, PARACHUTE MARK 33 MOD O |
| MIL-P-18613 Base Document:1955 | PRIMER MARK 102 MOD 1 |
| MIL-B-8948 Revision A:1972 | Bearing, Plain, Rod End, TFE Lined, Self-Aligning |
| MIL-B-60225 Base Document:1965 | BRAIDED FUZE MATERIAL |
| MIL L 3661 : B | LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR |
| MIL P 15011 : J | PALLET, MATERIAL HANDLING, WOOD, POST CONSTRUCTION, 4 WAY ENTRY |
| MIL-G-20697 Base Document:1957 | GUN, MACHINE, CAL 50, BROWNING, M2, HEAVY BARREL, ALL TYPES, PACKAGING OF |
| P-C-458 Revision C:1965 | CLOTH, ABRASIVE, CROCUS |
| O-E-950 Revision A:1975 | EXTRACT, QUEBRACHO |
| MIL-E-48225 Base Document:1973 | ETHYLENE GLYCOL DINITRATE (EGDN) |
| MIL-F-85400 Base Document:1980 | FUSE, GUIDED MISSILE, DUMMY FMU-138(D-1)/B |
| MIL-P-87931 Base Document:1977 | PROPELLANT, ISOPROPYL ALCOHOL |
| MIL-T-82402 Base Document:1965 | TRANSFORMER, DRY-TYPE, POWER DISTRIBUTION, STEP UP AND STEP DOWN SERVICE, 1000 KVA AND BELOW |
| MIL-DTL-19246 Revision E:2007 | CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A |
| MIL-W-5845 Revision C:1973 | WIRE, ELECTRICAL, IRON AND CONSTANTAN, THERMOCOUPLE |
| MIL-I-25931 Revision B:1964 | INDICATOR, POSITION, LANDING GEAR, SYMBOL-INDICATING, INTEGRALLY LIGHTED |
| MIL P 25508 : F | PROPELLANT, OXYGEN |
| SAE AS 1896 : 2013 | COUPLING ASSEMBLY, SELF-SEALING, ONE SIDE ONLY, HYDRAULIC |
| MIL-P-25632 Revision B:1960 | PITOT STATIC TUBE, ELECTRICALLY HEATED, TEMPERATURE CONTROLLED, 115 VOLT, 4OO HZ, TYPE MA-1 |
| MIL-P-47276 Revision B:1991 | PRIMER, BONDING |
| MIL-F-85815 Revision A:1993 | FUSE, BOMB, ELECTRONIC FMU-139A/B |
| MIL-S-6551 Revision A:1981 | |
| NASA KSC F 124 : 1994 | SPECIFICATION FOR FITTINGS, FLARED TUBE |
| GGG-B-500 Revision D:2015 | BLOCK, TACKLE (WIRE ROPE) |
| MIL-R-87989 Base Document:1989 | REVETMENT KIT, PREFABRICATED PIN TYPE, CORRUGATED STEEL PANELS |
| MIL-A-5034 Revision B:1979 | ADAPTER, BOMB RACK, 30-INCH, AERO 1A |
| MIL-DTL-55661 Revision C:2002 | CONNECTOR, PLUG, ELECTRICAL UG-1870( )/U CONNECTOR, RECEPTACLE, ELECTRICAL UG-1837( )/U |
| MIL-T-47326 Base Document:1990 | TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM-BACKED, ELECTRICALLY CONDUCTIVE |
| ASTM C 668 : 1998 | Standard Specification for Asbestos-Cement Transmission Pipe |
| ASTM B 236M : 2007 | Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric] |
| MIL-B-85560 Base Document:1983 | BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING GENERAL SPECIFICATION FOR |
| MIL M 81380 : C | MONITOR, CONTAMINATION, FUEL DISPENSING SYSTEM |
| GG-H-166 Revision B:1958 | |
| MIL-PRF-82791 Base Document:1990 | Rubber, Silicone, TRV |
| MIL-R-46089 Revision C:1991 | RUBBER, SPONGE, SILICONE, CLOSED CELL |
| MIL-B-37328 Base Document:1975 | BLOOD DETECTION TABLETS |
| GG-S-00792 Base Document:1963 | STYLUS, DUPLICATING STENCIL |
| AA-C-001870 Base Document:1974 | COSTUMER, METAL, CONTEMPORARY STYLE |
| TT C 00598 : C | CALKING COMPOUND, OIL AND RESIN BASE TYPE (FOR BUILDING CONSTRUCTION) |
| O-S-607 Revision C:1967 | SODIUM RESINATE, TECHNICAL |
| MIL-D-48178 Base Document:1973 | DYE, DIETHLYAMINO-AZOBENZENE (FOR COLORED SMOKE MIXTURES) |
| MIL-P-50039 Base Document:1959 | PAPER, NITRAZINE |
| HH-P-46 Revision E:1975 | PACKING; ASBESTOS, SHEET, COMPRESSED |
| DD-G-1403 Revision C:1983 | GLASS, FLOAT, SHEET, FIGURED, COATED (HEAT-STRENGTHENED AND TEMPERED) |
| MIL-A-615 Revision E:1974 | ALTAR, LECTERN, AND PULPIT HANGINGS (ECCLESIASTICAL) |
| AASHTO MP 18M/MP 18 : 1900 | SPECIFICATION FOR UNCOATED, CORROSION-RESISTANT, DEFORMED AND PLAIN ALLOY, BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT AND DOWELS |
| MIL-DTL-28786 Revision D:2014 | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| PPP-P-40 Revision C:1998 | PRESERVATION AND PACKING OF HAND TOOLS; TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING MACHINERY |
| MIL-DTL-9370 Revision E:2007 | VALVE, AUTOMATIC, PRESSURE REGULATING, ANTI-G SUIT |
| JJJ-A-00711 Revision E:1957 | ASPARAGUS, CANNED |
| MIL-C-81011 Base Document:1964 | CHARGER, BATTERY, METALLIC RECTIFIER, NAVAL SHIPBOARD, GUIDED MISSILE APPLICATION |
| MIL S 21438 : D | SWITCHES, ROTARY, SOLENOID OPERATED |
| MIL-P-44151 Revision A:1992 | PACKAGING INTO POUCHES AND MEAL ASSEMBLY OF ORAL LIQUID FEEDING POWDERS |
| MIL-I-46865 Revision B:1991 | INSULATING COMPOUND, ELECTRICAL, EPOXY, COLLOIDAL SILICA FILLED FOR POTTING AND ENCAPSULATION |
| MIL P 27404 : B | MILITARY SPECIFICATION PROPELLANT, MONOMETHYLHYDRAZINE |
| MIL-A-38346 Revision D:1970 | AIR CONDITIONER A/E32C-25 |
| DOD-A-15707 Revision D:1978 | ANCHOR, NAVY, LIGHTWEIGHT TYPE (METRIC) |
| MIL-F-36674 Base Document:1970 | FLASK, VOLUMETRIC, PLASTIC |
| BBB-S-1268 Revision B:1973 | SWEAT SHIRT |
| MIL-S-36177 Base Document:1964 | SACK, SHIPPING, PAPER |
| MIL-T-36153 Revision A:1977 | TEST TUBE, HERMATOCRIT DETERMINATION, WINTROBE, DISPOSABLE |
| RR-K-795 Revision A:1974 | KEY CHAIN, REEL (DOOR KEY AND DRILL CHUCK KEYS) |
| MIL-A-36247 Revision A:1970 | AUDIOMETER, AUTOMATIC |
| MIL R 6855 : E | RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES |
| LLL-T-1332 Revision A:1973 | TOOTHPICKS (WOOD) |
| MIL-H-43048 Revision B:1981 | HOOD, FLEXIBLE, GASOLINE RESISTANT, PROTECTIVE |
| MIL-C-12539 Revision B:1960 | CHARGER, BATTERY, METALLIC, POWER UNIT, PP-34/MSM |
| MIL-G-762 Revision E:1990 | GRADER, ROAD, PACKAGING OF |
| MIL L 47178 : 0 | LENS, PLASTIC, OPERATION |
| MIL-S-1733 Revision C:1971 | SUPPORT, SNAP FASTENER |
| GG-C-550 Revision B:1988 | COMPASS, DRAFTING, PIVOT, DROP SPRING BOW, PEN AND PENCIL, WITH CASE |
| MIL-B-4042 Revision E:1986 | BORESCOPE ASSEMBLIES, CYLINDER INSPECTION |
| MIL-C-49468 Base Document:1990 | CRYSTAL UNITS, QUARTZ, PRECISION, GENERAL SPECIFICATION FOR |
| MIL-P-7962 Revision D:1980 | PRIMER COATING, CELLULOSE NITRATE MODIFIED ALKYD TYPE, CORROSION INHIBITING, FAST DRYING [FOR SPRAY APPLICATION OVER PRETREATMENT COATING |
| MIL-I-22027 Base Document:1959 | IGNITER, JET ENGINE, MK 243 MOD 2 |
| MIL H 3780 : C NOTICE 1 | HANGER AND TRACK SETS, HORIZONTAL SLIDING DOOR |
| MIL M 7793 : F | METER, TIME TOTALIZING |
| MIL-W-80 Revision C:1966 | WINDOW OBSERVATION ACRYLIC BASE ANTIELECTROSTATIC TRANSPARENT (FOR INDICATING INSTRUMENT) |
| GG-O-635 Revision A:1977 | OPTICAL FLATS |
| MIL-M-55198 Revision A:1977 | MICROPHONE, DYNAMIC M-116 ( ) /G |
| MIL-C-17112 Revision A:1973 | COPPER-NICKEL-ZINC ALLOY (NICKEL-SILVER): CASTINGS |
| MIL-W-22759 Revision E:1990 | WIRE, ELECTRIC, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| L-S-626 Revision C:1967 | SPONGES, SYNTHETIC |
| MIL-T-52418 Revision B:1978 | TENSIOMETER, GAGE INDICATING |
| MIL-B-36408 Revision B:1978 | BOX, PATHOLOGICAL SPECIMEN, SHIPPING, INSULATED, PLASTIC |
| MIL N 37327 : A | NALIDIXIC ACID TABLETS, NF |
| MMM-A-134 Base Document:1970 | ADHESIVE EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING |
| MIL-M-37471 Base Document:1976 | MEDROXYPROGESTERONE ACETATE TABLETS, USP |
| MIL-C-37351 Revision A:1978 | CITRIC ACID, USP HYDROUS |
| MIL S 43355 : B | STRAP, CHIN AND SUSPENSION ASSEMBLY, CHIN STRAP |
| SAE ARP 618 : 2013 | BOSS FITTINGS, METAL SEAL, FLUID SYSTEMS: GENERAL REQUIREMENTS FOR |
| MIL-S-62300 Base Document:1983 | SWITCH, PRESSURE |
| HHH V 002178 : NOTICE 1 | VEGETABLE, MIXED, THERMOSTABILIZED, TRAY PACK |
| AA-D-170 Revision A:1976 | DESK, FLAT TOP |
| MIL-I-19632 Revision B:1960 | INSULATION, ELECTRICAL, DIELECTRIC BARRIER, LAMINATED, PLASTIC FILM AND RAG PAPER |
| MIL-A-25915 Revision A:1980 | ACCELEROMETER, AIRCRAFT, PILOTS WARNING, TYPE MA-2 |
| GG-C-00439 Revision C:1975 | CLIP, SUTURE, MICHEL, 16 MM |
| MIL-A-55379 Revision A:1979 | ANTENNA GROUP, P/O DIRECTION FINDER SET AN/TRQ-30()(V) |
| AA-B-551 Revision D:1973 | BOOKENDS, STEEL |
| MIL-T-12400 Revision A:1969 | TEST SET, BATTERY TS-776/U |
| MIL-C-52299 Revision D:1991 | CLAMP ASSEMBLY, TRESTLE BRACING |
| GG-T-585 Revision B:1986 | TONOMETER, OPHTHALMIC, SCHIOTZ |
| MIL C 43619 : 0 | CLOTH, NETTING, COTTON, ELASTICIZED, RASCHEL KNIT |
| MIL-R-3295 Revision B:1958 | REGULATOR, AIR PRESSURE, PROTECTIVE SHELTER M1 |
| MIL-P-8853 Base Document:1958 | PASTE, COPPER BRAZING, WATER THINNING |
| MIL-S-20660 Revision C:1977 | STEREOSCOPE, LENS-PRISM-MIRROR, AERIAL PHOTOGRAPH INTERPRETATION (WITH BINOCULARS AND CASE) |
| MIL C 27889 : D | COMPUTER, TRANSDUCER, ALTITUDE, ALTITUDE ENCODING, CPU-46/A, GENERAL SPECIFICATION FOR AND MTU-38/A MOUNTING TRAY |
| MIL-P-62669 Base Document:1991 | PRIMER COATING, SYNTHETIC, VOC COMPLIANT (FOR BRAKE DRUMS) |
| MIL-C-44046 Revision A:1981 | CONTAINER, HIGH SPEED, AERIAL DELIVERY |
| QQ-G-547 Revision B:1975 | GOLD LEAF |
| TT-I-540 Revision C:1973 | INK, NUMBERING AND DATING MACHINE |
| MIL-C-19064 Revision B:1964 | CONNECTOR, OXYGEN HOSE TO REGULATOR |
| MIL-K-83525 Base Document:1985 | KIT, PORTABLE OPTICAL MICROSCOPE, MILITARIZED, 200X MAGNIFICATION FOR FIELD INSPECTION OF OPTICAL FIBERS |
| GG S 00750 : B | STENCIL DUPLICATING PRINT KIT, HAND STAMP |
| MIL-D-11381 Revision E:1977 | DRAFTING EQUIPMENT SET, TOPOGRAPHIC BATTALION, HEADQUARTERS AND SERVICE COMPANY, PACKAGING OF |
| MIL-P-5610 Revision D:1968 | PARACHUTE ASSEMBLIES AND MAJOR SUB-ASSEMBLIES, PACKAGING AND PACKING OF |
| TT-I-542 Revision E:1975 | INK, MARKING, LAUNDRY, BLACK |
| FF-P-00416 Revision F:1971 | PIN, SAFETY |
| P-W-155 Revision C:1978 | WAX, FLOOR, WATER-EMULSION |
| MIL-B-22036 Revision D:1991 | BRIDLE AND PENDANT ASSEMBLIES, AIRCRAFT LAUNCHING |
| MIL-P-23108 Base Document:1961 | PLUG IN UNIT FOR TEST SET, ECHO SIMULATOR (U) |
| DDD-C-48 Revision E:1968 | CAP, OPERATING, SURGICAL, GREEN |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-M-49089 Base Document:1976 | MAST AB-864( (/G AND MAST EXTENSION KIT MK-1624) (/G |
| MIL-C-24224 Revision B:1985 | Cartridge, Gas Pressure, for Pressurizing Dry Chemical Fire Extinguishers |
| MIL-S-22805 Revision B:1993 | SPRAY KIT, SELF PRESSURIZED |
| MIL-T-37638 Revision A:1978 | TEST TUBE, 12 BY 75 MM POLYSTYRENE DISPOSABLE |
| MIL-B-27049 Base Document:1962 | BOMB, LOADING PRACTICE BDU-15/E BOMB, LOADING PRACTICE BDU-16/E |
| GG-C-620 Revision C:1962 | COUNTER, RECIPROCATING, HAND-HELD |
| MIL-W-36369 Revision A:1975 | WIRE FABRIC [FOR SURGICAL USE] |
| MIL-C-43899 Revision A:1985 | COUPLING, EXTRACTION FORCE TRANSFER, PLATFORM |
| MIL-B-36275 Revision A:1976 | BOX, SHIPPING, HISTOPATHOLOGICAL SPECIMENS, DISPOSABLE |
| DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS |
| HH-I-525 Revision A:1968 | INSULATION BOARD, THERMAL CORK (SUPERSEDES HH&C&561B) |
| MIL-G-36721 Base Document:1970 | GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATING |
| MIL-S-19819 Revision C:1974 | SWITCH, FIRING, MARK 8 MOD O AND 1 (INERTIA) FOR EXPLODER MECHANISM MARK 19 SERIES |
| MIL-C-22896 Revision A:1968 | CONTACTOR |
| MIL-P-82459 Base Document:1966 | PRESSURE TRANSDUCER (FOR TORPEDO MK 46 MOD 0 AND MOD 1) |
| EE-C-002147 Base Document:1988 | CHILI CON CARNE, THERMOSTABILIZED, TRAY PACK |
| MIL-A-37270 Base Document:1976 | ARCH BOARD FILE AND BOX, PRESCRIPTION FILING |
| MIL-A-36494 Base Document:1966 | AUDIOMETER, PORTABLE |
| MIL-C-37734 Base Document:1977 | COVER, MATTRESS PAD |
| MIL-G-43411 Revision D:1982 | GLOVES, BARBED TAPE - WIRE HANDLERS |
| MIL-S-24660 Base Document:1985 | Sprinkler Head, 180 Degrees Full Cone |
| UU P 1047 : (1) | PAPER, TYPEWRITER CORRECTION |
| MIL-C-55211 Revision B:1969 | CHARGER, BATTERY, PP-1451( ) /G |
| MIL-B-43542 Revision B:1985 | BOOT, DOG |
| MIL S 52792 : 0 | SURVEY SET, HYDROLOGY, PACKAGING OF |
| PPP-P-1998 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR STORAGE SECTIONS, OVERFILE, STEEL |
| MIL-I-24739 Revision A:1991 | INFLATION ASSEMBLY, AUTOMATIC MANUAL, LIFE PRESERVER |
| MIL-C-7974 Revision D:1990 | CABLE ASSEMBLIES AND ATTACHABLE PLUGS, EXTERNAL ELECTRICAL POWER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-I-46437 Revision B:1970 | IGNITER, DOCUMENT DESTROYER, INCENDIARY, M25 |
| MIL-A-21672 Base Document:1958 | ARMING CELL MARK 2 MODS 1 AND 2 |
| GG-O-588 Revision B:1964 | OPENER, LETTER, HAND, METAL |
| GG-S-001015 Revision A:1969 | SYRINGE, FOUNTAIN |
| MIL-G-17489 Revision B:1961 | GAGE, PRESSURE (AIR), BOILER |
| MIL C 55040 : B NOTICE 1 | CABLE, SPECIAL PURPOSE, ELECTRICAL (RETRACTILE) |
| MIL-B-43159 Revision D:1979 | BOX, TOTE, PLASTIC, HARDWARE |
| MIL-V-27296 Revision C:1993 | VALVE, OXYGEN MASK, COMBINATION INHALATION AND EXHALATION |
| MIL-B-1406 Revision C:1975 | BOTTLE, SCREW CAP, IDENTIFICATION, BURIAL |
| MIL K 36311 : C NOTICE 1 | KNIVES, MICROTOME |
| MIL-C-11532 Revision C:1961 | CASEIN |
| MIL-G-5634 Revision C:1970 | GRAIN, ABRASIVE, SOFT FOR CARBON REMOVAL |
| MIL S 22499 : C | SHIM STOCK, LAMINATED |
| MIL-F-50053 Base Document:1959 | FILTER,GAS AND PARTICULATE 2,500 CFM M16 |
| GG-T-621 Revision C:1985 | TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS |
| MIL P 46610 : E | PRIMER, PERCUSSION, STYPHNATE AND CHLORATE TYPES, FOR SMALL ARMS AMMUNITION |
| GGG-T-671 Revision C:1992 | TROWELS |
| MIL-B-63369 Base Document:1981 | BOOSTER ASSEMBLY, INERT FOR DEMOLITION KIT CRATERING, TRAINING, XM270 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL-P-55149 Revision B:1988 | POST, BINDING, ELECTRICAL (INSULATED AND UNINSULATED) GENERAL SPECIFICATION FOR |
| MIL-T-43957 Revision D:1991 | TROUSERS, MEN'S, DRESS, WOOL AND POLYESTER/WOOL |
| MIL-P-46121 Revision B:1977 | ELASTIC SHEET AND COATING MATERIAL, PARA-XYLYLENE POLYMERS |
| MIL-T-47052 Base Document:1974 | TAPE, EPOXY-GLASS CLOTH, THERMOSETTING, PRESSURE SENSITIVE ADHESIVE |
| MIL-L-52325 Revision D:1988 | LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS |
| ASTM D 2680 : 2001 : R2009 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping |
| MIL-T-48140 Base Document:1973 | TUNGSTEN POWDER (FOR PYROTECHNICS) |
| MIL T 81736 : 0 | TAPE, TEXTILE, NYLON, LANDBASED ARRESTING GEAR, 8-INCH |
| MIL E 81111 : B | EXPLOSIVE, PLASTIC BONDED MOLDING POWDER (PBXN-5) |
| MIL-O-60863 Revision A:1986 | OXAMIDE |
| PPP-B-587 Revision B:1987 | BOX, WOOD, WIREBOUND PALLET TYPE |
| MIL-R-82657 Base Document:1977 | Resin, Epoxy, Trifunctional |
| GG-F-615 Base Document:1961 | FORCEPS, SPLINTER |
| L-P-375 Revision D:1994 | PLASTIC FILM, FLEXIBLE, VINYL CHLORIDE |
| MIL-B-21332 Revision E:1978 | BAG, LAUNDRY, NYLON |
| MIL-V-19069 Revision B:1986 | Valve, Check, Hydraulic, Aircraft, Type II Systems |
| MIL-I-23264 Revision A:1968 | Insulators, Ceramic, Electrical and Electronic, General Specification for |
| MIL W 3903 : D | WIRE ROPE ASSEMBLY, SINGLE LEG |
| MIL F 50058 : 0 | FILTER UNIT, GAS AND PARTICULATE, EMD, 5,000 CFM, M12 |
| AA-O-00240-5 Revision C:1970 | OFFICE FURNITURE, TOP ASSEMBLY, DESK AND SUPPORT PANELS, STEEL, UNITIZED |
| GG-H-0080 Revision A:1967 | HANDLE AND BLADE SET, SURGICAL KNIFE, DETACHABLE BLADE |
| MIL-R-81158 Revision A:1966 | REAR COVER ASSEMBLED UNIT (FOR TORPEDO MARK 37 MODS O AND 1) |
| MIL-I-85352 Base Document:1980 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE REMOTE CONTROL, DIRECT READING |
| MIL-V-62038 Revision E:1988 | VEHICLE, WHEELED, PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-W-21993 Revision B:1977 | WIRE ROPE ASSEMBLY, MOORING, MARK 1 MOD 1 |
| MIL-M-81957 Revision B:1990 | MOBILE TEST FACILITY, GAS TURBINE ENGINE TEST SYSTEMS - GENERAL SPECIFICATION FOR |
| MIL-W-23068 Base Document:1961 | WAVEGUIDES. RIGID. CIRCULAR. |
| GGG-C-430 Revision A:1967 | CLEANER, VALVE STEM GUIDE |
| MIL-H-22868 Base Document:1961 | HYDROGEN PEROXIDE, E-STABILIZED, 7O PERCENT AND 9O PERCENT (FOR TORPEDO USE) |
| MIL-B-43666 Revision D:1986 | BOXES, SHIPPING, CONSOLIDATION |
| MIL-P-71093 Base Document:1992 | POWDER, IGNITION, GASLESS, F-33B |
| MIL-M-46891 Revision A:1980 | MOLDING COMPOUND, PHENOLIC RESIN, ASBESTOS REINFORCED |
| SS-P-821 Revision C:1989 | PUMICE, GROUND, ABRASIVE |
| MIL-C-85656 Base Document:1985 | CARTRIDGE, 25 MM, HIGH EXPLOSIVE INCENDIARY (M5) PGU-25/U |
| P-D-455 Revision D:1975 | DISKS, ABRASIVE, ALUMINUM OXIDE |
| MIL P 27235 : A | PIN, STRAIGHT, HEADED (CLEVIS PINS) |
| MIL-E-3677 Revision D:1993 | ERECTION EQUIPMENT FOR BRIDGE, FIXED, STEEL PANEL, BAILEY TYPE |
| MIL-I-8574 Revision E:1982 | INHIBITOR, CORROSION, VOLATILE, UTILIZATION OF |
| MIL-G-3787 Revision G:1976 | GLASS, LAMINATED, FLAT [EXCEPT AIRCRAFT] |
| MIL-A-23404 Revision A:1982 | ADAPTER KIT, MARINE MARKER MK 34 MOD O |
| MIL-R-23452 Revision A:1982 | ROCKET MOTOR MARK 25 MODS O, 1 AND 2 |
| MIL-B-55291 Revision C:1970 | BATTERY, THERMAL |
| MIL C 82537 : A | CASE, CARTRIDGE, STEEL, SPIRAL WRAPPED 40 MILLIMETER (MM) AND LARGER CALIBERS, GENERAL SPECIFICATION FOR |
| MIL-C-19262 Revision A:1976 | CLOTH, PARACHUTE |
| MIL-C-52947 Revision B:1986 | COAGULANT, WATER TREATMENT: POLYELECTROLYTE, CATIONIC, LIQUID |
| MIL-R-51397 Revision C:1981 | REFILL KIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M229 |
| GGG-O-599 Revision B:1963 | OPENER, CRATE |
| MIL-I-47100 Base Document:1974 | INSULATION SLEEVING, FLEXIBLE, BRAIDED, 200 DEGREES CELSIUS (HIGH TEMPERATURE POLYAMIDE) |
| MIL-C-81536 Base Document:1967 | CARTRIDGE, IMPULSE, MARK 105 MOD 0 |
| MIL-R-12221 Revision D:1985 | RIVET, SOLID, ALUMINUM ALLOY, GRADE 7277, TEMPERED |
| MIL-A-46050 Revision C:1979 | ADHESIVE, CYANOACRYLATE, RAPID-ROOM TEMPERATURE CURING, SOLVENTLESS |
| MIL D 98 : A | DIPHENYLAMINE TECHNICAL |
| MIL-L-758 Revision A:1962 | LEAD STERITE (FOR USE IN AMMUNITION) |
| WW-H-171 Revision E:1977 | HANGERS & SUPPORTS, PIPE (FOR DOD USE - ANSI/MSS-SP-58, ANSI/MSS-SP-69, NFPA 11, 12, 13, 14, 15, 16 & 17 |
| MIL C 51247 : 0 | CLOTH, PLAIN WEAVE, SYNTHETIC FIBER |
| MIL-B-29110 Revision B:1981 | BAG, LAUNDRY, SUBMARINE |
| MIL-F-48057 Revision B:1981 | FUZE, ROCKET, PIBD, M438 SUB-ASSEMBLY WITH DETONATOR |
| T-O-56 Revision A:1970 | OAKUM, MARINE |
| MIL T 18752 : NOTICE 1 | TRACER MARK 5 MOD 1 |
| MIL-C-48254 Revision A:1984 | CHARGES, EXPELLING, FOR PROJECTILE, 155MM, ILLUMINATING, M485A2 LOADING, ASSEMBLING AND PACKING |
| AA-C-112 Revision D:1976 | CARTS, SURGICAL DRESSING |
| GGG-S-278 Revision B:1994 | SHEARS AND SCISSORS |
| FF-S-107 Revision C:1969 | SCREW, TAPPING AND DRIVE |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| GG-G-00650 Revision A:1970 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| GG-B-00821 Revision E:1976 | BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE |
| MIL-C-18653 Revision B:1961 | CARTRIDGE, ONE INCH, MARK 1 AND MARK 2 ALL MODS (BOMB EJECTOR) |
| MIL-F-85744 Base Document:1987 | FUSE, PROXIMITY, DISPENSER FMU-140/B |
| MIL-A-52759 Base Document:1973 | ANTI-TANK MINE DISPENSING SYSTEM, PACKAGING OF |
| MIL-H-44298 Revision C:1994 | HAM SLICES, CHUNKED AND FORMED, SMOKE FLAVORING ADDED, THERMOSTABILIZED, TRAY PACK |
| MIL H 26894 : C | HOSE ASSEMBLY, RUBBER, GASOLINE, REFUELING, LOW TEMPERATURE |
| MIL-P-63196 Revision A:1980 | POLYURETHANE ELASTOMER BINDER (FOR USE IN AMMUNITION) |
| MIL-B-17089 Revision A:1957 | Barometer, Aneriod MI-448 UM |
| ASTM A 1085/A1085M : 2015 : REDLINE | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| FF-T-77 Revision C:1980 | TAG AND HOLDER, KEY |
| MIL E 82447 : A | EXERCISE HEAD TEST SET MARK 485 MOD 0 (FOR TORPEDO MK 46 MOD O/1) |
| MIL-P-46125 Revision A:1980 | PROJECTILE CUBES, FRAGMENT-SIMULATING |
| GGG C 00748 : C | CUTTER, CIRCLE (ADJUSTABLE); FOR GASKETS AND WASHERS |
| MIL-C-51127 Revision B:1967 | CALCULATOR, NUCLEAR YIELD, ABC-M4 |
| MIL I 24453 : A | INHIBITOR, CORROSION, SOLUBLE OIL |
| GGG-B-110 Revision A:1966 | BAR, COMBINATION PRY AND SCRAPER |
| MIL-C-85247 Base Document:1982 | COMPUTER, AIR DATA CP-1005A/A |
| MIL S 46874 : 0 | SEAL, RF AND PRESSURE |
| MIL-G-81168 Base Document:1964 | GYROSCOPE, RATE INTEGRATING |
| MIL-I-46877 Base Document:1973 | INSULATING COMPOUND, ELECTRICAL |
| MIL-S-38249 Base Document:1964 | SEALING COMPOUND, FIREWALL |
| MIL-M-5776 Revision C:1990 | MAINTENANCE PLATFORM, AIRCRAFT ADJUSTABLE, 13 TO 20 FEET TYPE B-2 |
| MIL-J-43967 Revision C:1989 | JERSEY, REVERSIBLE |
| MIL-DTL-27444 Revision E:2012 | NET, CARGO TIE-DOWN, AIRCRAFT PALLET HCU-7/E, HCU-7A/E, HCU-15/C |
| MIL-L-22692 Revision A:1968 | LOCATOR, ORDNANCE, MARK 9 MOD O |
| MIL-P-83037 Revision A:1968 | PLATFORM, CARGO, AERIAL DELIVERY A/E29H-1 |
| MIL-B-1995 Revision E:1972 | BRUSH, GREASE, COOKING AND BAKING |
| NNN D 350 : A NOTICE 1 | DISH GUM TEST |
| DD-B-601 Base Document:1959 | BOTTLE, STOPPER, MILK DILUTION, 160 MILLILITRES |
| MIL-B-83665 Revision B:1981 | BAG, PILOT RELIEF (MALE) |
| NNN-T-698 Base Document:1963 | TRIPOD LABORATORY APPARATUS |
| MIL-B-26994 Revision E:1992 | BALANCER, VEHICLE WHEEL, ON-VEHICLE TYPE |
| MIL-C-81003 Base Document:1964 | Clinometer, Elevation ML-591/U |
| MIL-D-26549 Revision A:1970 | DESCALING COMPOUND, ALKALINE, HOT SECTION JET ENGINE PARTS |
| MIL S 17923 : B NOTICE 2 | SQUIB, MARK 1 MODS |
| MIL-C-81991 Base Document:1975 | CONVERTER, AIRCRAFT DC TO DC, BOOST GENERAL SPECIFICATION FOR |
| MIL-DTL-85537 Revision A:1997 | TRAILER, MUNITIONS, AERO 51C |
| MIL-DTL-25666-4 Base Document:1971 | Converter, Liquid Oxygen, GCU-12A/A |
| MIL R 26126 : B | RELAY, ELECTRICAL, OVERVOLTAGE DC, GENERAL SPECIFICATION FOR |
| MIL-R-8573 Revision A:1957 | RESERVOIRS, AIR, NONSHATTERABLE STEEL |
| MIL-DTL-1213 Revision F:2013 | Cups, Grease |
| MIL C 82172 : C | COAT, MAN'S: SUMMER AND WINTER, SCARLET, DRUM AND BUGLE CORPS, DRUM MAJOR AND DIRECTOR |
| MIL E 83425 : 0 | EARCUP, SOUND PROTECTIVE MX-8376/AR GENERAL SPECIFICATION FOR |
| MIL-S-58095 Revision A:1986 | SEAT SYSTEM: CRASH RESISTANCE, NON-EJECTION, AIRCREW, GENERAL SPECIFICATION FOR |
| MIL B 22191 : D | BARRIER MATERIAL, TRANSPARENT, FLEXIBLE, HEAT SEALABLE |
| A-A-52450 Revision C:2014 | VERMICULITE, ABSORBENT (FOR PACKAGING LIQUID HAZARDOUS MATERIALS) |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| MIL-B-45081 Revision E:1991 | BLAST CLEANING MACHINE: SELF-CONTAINED TUMBLE TYPE, WITH DUST COLLECTOR |
| MIL-A-81917 Base Document:1973 | Aircraft Firing Circuit Test Set AN/AWM-54 |
| MIL-C-24449 Revision A:1981 | CAST POLYMETHYL METHACRYLATE FOR SHEET STOCK, CUSTOM CASTINGS AND FINISHED WINDOWS |
| MIL-M-809 Revision F:1988 | Mitten Inserts, Cold Weather, Trigger Finger (No S/S/ Document) |
| MIL-T-55335 Base Document:1971 | Test Facilities Kit, MK-1191( )/AR (Units of) (No S/S Document) |
| MIL-G-46382 Base Document:1963 | GAGE, SNAP, THREAD ROLL |
| MIL M 49503 : A | MANUALS, TECHNICAL: GENERAL STYLE AND FORMAT, TEST PROGRAM SETS FOR AUTOMATIC TEST EQUIPMENT |
| MIL-G-37639 Base Document:1977 | GENTAMICIN SULFATE OPHTHALMIC SOLUTION |
| MIL-T-37463 Base Document:1976 | THYROID TABLETS, USP |
| MIL G 81188 : B | GLOVES, FLYER'S, SUMMER, TYPE GS/FRP-2 |
| MIL C 87110 : A NOTICE 2 | COAT, ALL WEATHER: MAN'S, BLUE, WITH REMOVABLE LINER |
| MIL-N-51301 Base Document:1969 | NICKEL CHLORIDE, HEXAHYDRATE, ANALYZED REAGENT |
| MIL-R-83516 Revision C:2017 | Relays, Reed, Dry, General Specification for (No S/S Document) |
| MIL-A-51312 Base Document:1969 | ANTIMONY TRIOXIDEM, ANALYZED REAGENT |
| MIL-C-12226 Revision H:1993 | Cover, Toxicological Agents Protective Gas Mask Hood, Cooling (No S/S Document) |
| MIL-C-44030 Revision B:1988 | COAT, ALL WEATHER: MAN'S BLACK, WITH REMOVABLE LINER |
| MIL-G-52538 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED 10KW 60 HERTZ PU-332A/G |
| MIL-P-37445 Base Document:1976 | POTASSIUM CHLORIDE ORAL SOLUTION, USP |
| MIL-S-85565 Base Document:1985 | SERVO COLD GAS |
| MIL C 28781 : B | CABLE, ELECTRICAL, SPECIAL PURPOSE, SHORE USE |
| MIL-PRF-87260 Revision B:2006 | Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks |
| MIL-A-37772 Base Document:1978 | |
| MIL-N-37506 Base Document:1976 | NEOMYCIN SULFATE, GRAMICIDIN, AND POLYMYXIN B SULFATE OPHTHALMIC SOLUTION |
| MIL-M-55143 Revision A:1966 | MOTOR GENERATOR PU-126 ( ) /U (ROTARY CONVERTER) |
| MIL L 81542 : A | LIFE RAFT, INFLATABLE, ONE MAN, TYPE LR-1 |
| MIL-L-37731 Base Document:1978 | LACTOBACILLUS ACIDOPHILUS CAPSULES |
| MIL C 37776 : 0 | CETYLPYRIDINIUM CHLORIDE AND BENZOCAINE LOZENGES |
| MIL A 51027 : A | ANTISETTING COMPOUND, DECONTAMINATING SLURRY, M2 |
| MIL-T-37228 Base Document:1975 | THEOPHYLLINE, EPHEDRINE SULFATE, AND HYDROXYZINE HYDROCHLORIDE TABLETS |
| MIL-H-37658 Base Document:1977 | HYDROCHLOROTHIAZIDE TABLETS, USP |
| MIL-I-37559 Base Document:1977 | ISOPROTERENOL HYDROCHLORIDE AND PHENYLEPHRINE BITARTRATE AEROSOL |
| MIL W 23351 : A | WAVEGUIDE, SINGLE RIDGE AND DOUBLE RIDGE, GENERAL SPECIFICATION FOR |
| MIL-N-37691 Revision A:1978 | NYSTATIN ORAL SUSPENSION, USP |
| MIL-A-37336 Base Document:1975 | ANTIPYRINE AND BENZOCAINE SOLUTION |
| MIL F 20268 : G | FRAME, CAP, MAN'S |
| MIL-P-46199 Base Document:1989 | PLATE: ALUMINUM OXIDE CERAMIC (FOR USE IN ARMOR COMPOSITES) |
| MIL-T-36245 Revision A:1972 | TEST KIT, LACTIC DEHYDROGENASE ACTIVITY 10 DETERMINATIONS |
| P-S-120 Revision B:1977 | SCALE REMOVING COMPOUND (SOLID AND LIQUID FORM) |
| MIL S 36956 : A | SULFUR AND SALICYLIC ACID CAKE |
| MIL-T-37330 Revision A:1976 | TOLBUTAMIDE TABLETS, USP |
| MIL-P-37606 Base Document:1978 | PERPHENAZINE AND AMITRIPTYLINE HYDROCHLORIDE TABLETS |
| MIL-B-37527 Base Document:1977 | BETAMETHASONE VALERATE CREAM, NF |
| MIL-P-37460 Base Document:1977 | PIPERAZINE CITRATE SYRUP, USP |
| MIL-L-44142 Revision A:1986 | LAUNDRY UNIT, TRAILER MOUNTED |
| MIL-C-37644 Base Document:1978 | CALCIUM THIOGLYCOLLATE, TRIHYDRATE, CREAM |
| MIL-P-36248 Base Document:1964 | POTASSIUM PHOSPHATE DIBASIC, ANHYDROUS, ANALYZED REAGENT, 1/4 LB [113.4 GM] |
| MIL-P-37784 Base Document:1977 | PILOCARPINE OPHTHALMIC DISCS |
| MIL C 37810 : A | CHLORPROMAZINE HYDROCHLORIDE SOLUTION |
| MIL-S-52781 Revision A:1979 | STRIP, MARKING, ALUMINUM |
| MIL-C-81330 Revision A:1968 | CARTRIDGE, DELAY, MARK 87 MOD O |
| MIL-A-10450 Revision D:1983 | ANILINE, TECHNICAL (METRIC) |
| MIL-A-83462 Base Document:1975 | ARCTIC CUSHIONS - CLOTHING, CHU-10/P AND CHU-11/P |
| MIL-L-3055 Revision C:1992 | LEAD AZIDE |
| MIL I 25137 : A | INDICATOR, AIRSPEED, MACH NUMBER AND MAXIMUM ALLOWABLE SPEED, TYPE ME-4 |
| MIL-C-26485 Revision D:1968 | CONTROL ASSEMBLY, ATTITUDE, GYROSCOPIC AF/A24G-1A |
| MIL T 38230 : B (1) | TRANSMITTER, PRESSURE TRU 66/A OIL, VARIABLE RELUCTANCE |
| MIL-R-23761 Revision B:1975 | Regulators, Voltage, and Control Panels Aircraft, Direct Current Generator, General Specification for |
| MIL-T-85026 Revision D:1988 | TEST SET AN/ASM-475 FOR THE AN/ASX-2 RECOGNITION SET |
| MIL-Q-10194 Revision D:1969 | Q METER TS617/U |
| MIL-P-37386 Base Document:1976 | PENICILLIN V POTASSIUM TABLETS, U.S.P. |
| MIL-S-5944 Revision C:1990 | SLING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| DOD-B-24200 Revision B:1978 | BATTERY CELLS AND ELEMENTS, LEAD-ACID, LEAD-ANTIMONY, MAIN STORAGE, SUBMARINE; GENERAL SPECIFICATION FOR (METRIC) |
| GG R 001638 : NOTICE 1 | REMOVAL, DENTAL CROWN, SIMPLEX |
| MIL-I-23366 Revision B:1987 | Indicator, Horizontal Situation ID-1013(*)/A |
| MIL-T-12333 Revision C:1969 | TEST SET, CRYSTAL UNIT, QUARTZ TS-710/TSM |
| MIL I 83452 : LATEST | INDICATOR, TAPE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-27280 Revision A:1960 | INDICATOR, INDICATED AIRSPEED AVU-10/A |
| MIL-C-62074 Revision C:1985 | CHASSIS, WEAPON, FULL-TRACKED, M741, AND M741A1; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-I-55493 Revision A:1970 | IMAGE INTENSIFIER ASSEMBLY 40 MILLIMETER, MX-7856/UV |
| MIL-T-43955 Revision B:1985 | TRUNK, GENERAL PURPOSE, EXERCISER |
| MIL-F-47254 Base Document:1974 | FOAM, POLYURETHANE, OPEN CELL, MEDIUM FLEXIBILITY |
| MIL-A-46655 Revision B:1965 | ATTACHMENTS, TOW AND PUSH FOR DEMOLITION KIT, PROJECTED CHARGE, M157 PARTS FOR AND PACKING |
| MIL R 83725 : B | RELAY, VACUUM, GENERAL SPECIFICATION FOR |
| MIL-A-24914 Base Document:1984 | ARM SLEEVE, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
| NNN E 00920 : B | EXTRACTION ASSY |
| GG S 00176 : C | SCREEN, X-RAY INTENSIFYING |
| MIL-C-44358 Revision A:1991 | COVER, INDIVIDUAL, CAMOUFLAGE |
| UU-C-225 Revision A:1972 | CARTON, EGG |
| MIL-B-43119 Revision B:0197 | BRACKET, M21 REEFING LINE CUTTER, CARGO PARACHUTE CANOPY |
| MIL-I-44301 Base Document:1987 | INK, MARKING, DRY FOIL, FOR NAME TAPES. |
| MIL-B-36470 Base Document:1966 | BASKET, PIPET, PLASTIC |
| MIL-P-15742 Revision C:1988 | PLUGS, PLASTIC (HEAT-EXCHANGER-TUBE) |
| MIL-F-50045 Base Document:1959 | FILTER, PARTICULATE, 2,500 CFM, C30 |
| DDD-D-00620 Base Document:1965 | DRAPE, SURGICAL, PLASTIC, STERILE 18 BY 36 INCHES |
| MIL-N-36124 Revision B:1975 | NEEDLES, HYPODERMIC, DISPOSABLE |
| MIL-P-44234 Revision A:1989 | POTATOES, DICED IN BUTTER SAUCE, THERMOSTABILIZED, TRAY PACK |
| MIL-G-45811 Revision D:1992 | GAGE, AIR, LOW PRESSURE, PNEUMATIC FLOATING EQUIPMENT |
| HH-I-545 Revision B:1971 | INSULATION, THERMAL AND ACOUSTICAL (MINERAL FIBER, DUCT LINING MATERIAL) |
| MIL C 55425 : C | CABLE, TELEPHONE WF-16 ()/U |
| MIL-G-52627 Revision A:1971 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 5KW 60 HERTZ PU-409A/M |
| AA-V-200 Revision B Interim Revision:1973 | VENETIAN BLINDS |
| MIL-B-37749 Base Document:1978 | BOX PATHOLOGICAL SPECIMEN, SHIPPING |
| MIL A 25088 : C | |
| MIL-T-26639 Revision C:1969 | TESTER, TORQUE WRENCH |
| MIL-W-19088 Base Document:1955 | WATTMETER, SWITCHBOARD TYPE 4-1/2 INCH |
| MIL-T-29146 Revision B:1984 | TROUSERS, FIREMANS ALUMINIZED PROXIMITY |
| MIL F 51221 : A | FILTER, PARTICULATE, 150 CFM, M24 |
| MIL-P-17098 Revision A:1952 | PSYCHROMETER, HAND, ELECTRIC, ASPIRATING, M1-450/UM AND CARRYING CASE, PSYCHROMETER, CY-1238/UM |
| PPP-C-850 Revision D:1964 | CUSHIONING MATERIAL, POLYSTYRENE EXPANDED, RESILIENT (FOR PACKAGING USES) |
| NASA JSC 66552 : 2013 | ELECTROSTATIC DISCHARGE CONTROL REQUIREMENTS FOR THE PROTECTION OF ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-M-28519 Revision A:1984 | METER, VOLUMETRIC, POSITIVE DISPLACEMENT, LIQUID, AIRCRAFT FUEL, 6OO GPM |
| MIL-P-44239 Revision B:1990 | POTATOES WITH BACON PIECES IN SAUCE, THERMOSTABILIZED, TRAY PACK |
| MIL-I-11132 Revision H:1987 | INSIGNIA; BRANCH OF SERVICE, GRADE, RANK, GARRISON CAP, AND SERVICE CAP, ROTC AND JROTC PERSONNEL, ARMY AND AIR FORCE |
| KK-W-266 Revision A:1961 | WHEEL, BUFFING, CHAMOIS, 3 INCH |
| MIL R 3533 : B | RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED |
| MIL-B-87167 Base Document:1985 | BELT, AIRCRAFT SAFETY, HBU-12/A |
| GG-C-0080 Base Document:1965 | CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL |
| MIL-B-44229 Revision B:1990 | BEEF AND CARROTS IN GRAVY, THERMOSTABILIZED, TRAY PACK |
| MIL-I-6514 Revision B:1988 | INDICATOR, OIL PRESSURE, 0-200 PSI, 320 DEGREE, TYPE B-9C |
| MIL C 44048 : G | COATS, CAMOUFLAGE PATTERN, COMBAT |
| GG-F-355 Revision A:1975 | FINGERPRINT IDENTIFICATION KITS |
| MIL-S-51201 Revision A:1969 | SAMPLING & ANALYZING KIT, CBR AGENTS, M19 |
| MIL-C-44268 Revision A:1989 | CARROTS, GLAZED, THERMOSTABILIZED, TRAY PACK |
| MIL-N-58106 Base Document:1982 | NET, HELICOPTER CARGO CARRYING EXTERNAL 5,000 AND 10,000 POUND CAPACITIES |
| MIL-I-25861 Revision D:1967 | INDICATOR, PRESSURE, HYDRAULIC, 0-4000 PSI INTEGRALLY LIGHTED |
| MIL-P-18177 Revision C:1960 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY RESIN |
| MIL-W-82400 Base Document:1965 | WET SUIT NEOPRENE |
| MIL-I-43746 Revision B:1968 | INSECT NET, HAT, SUN, HOT WEATHER |
| PPP-P-115 Revision D:1973 | PAD, PAPER, MACERATED |
| MIL-T-46114 Revision B:1978 | TAPE, GLASS-SETTING, RUBBER, UNCURED (FOR SEALING GLASS WINDOWS) |
| LLL-C-83 Revision B:1977 | CANES, WALKING |
| MIL H 55460 : A | HEADSET-MICROPHONE H-182()/PT |
| MIL-F-51440 Revision A:1981 | FILTER, AIR CHEMICAL - BIOLOGICAL B46 |
| QQ-B-654 Revision A:1980 | BRAZING ALLOY, SILVER |
| MIL-M-36314 Revision B:1976 | MICROTOME, ROTARY, AUTOMATIC |
| LLL B 800 : B NOTICE 1 | BUILDING BOARD (WOOD PARTICLEBOARD) HARD PRESSED VEGETABLE FIBER |
| MIL-B-45977 Revision B:1990 | BINS, CABINETS, SHELVING AND WORKTABLES, PACKAGING OF |
| GG-S-773 Revision D:1978 | STRAIGHTEDGES: PLASTIC AND WOOD |
| FF-C-88 Revision C:1971 | CASTERS, RIGID AND SWIVEL, INDUSTRIAL DUTY |
| MIL-R-83520 Base Document:1983 | RELAYS, ELECTROMECHANICAL, GENERAL PURPOSE, NON-HERMETICALLY SEALED, PLASTIC ENCLOSURE (UST COVER) |
| MIL-R-12323 Revision G:1992 | REFRIGERATOR AND RELATED EQUIPMENT, PACKAGING AND PACKING OF |
| JJJ-C-561 Revision E:1978 | COTTON, PURIFIED (STERILE) AND NONSTERILE |
| MIL-B-36931 Revision A:1973 | BOX, FOLDING, SPECTACLE, MAILING |
| MIL-B-44395 Base Document:1989 | BAG, PLASTIC (FOR HEATING WATER IN COMBAT VEHICLES) |
| MIL W 30508 : 0 | WIRE, ARMATURE BANDING |
| MIL-L-43693 Revision A:1991 | LOWERING DEVICE, PERSONNEL AND CARGO |
| FF-W-1825 Revision A:1976 | WOOL AND GAUZE, METALLIC |
| HHH-B-002166 Base Document:1988 | BEANS, GREEN, THERMOSTABILIZED, TRAY PACK |
| MMM-A-1058 Revision A:1975 | Adhesive, Rubber Base, (in Pressurized Dispensers) |
| PPP-B-676 Revision E:1992 | BOXES SET-UP |
| JJJ-P-630 Revision C:1979 | POTATOES, WHITE, DEHYDRATED |
| MIL-J-36511 Base Document:1966 | JAR, PIPET, PLASTIC |
| MIL-P-43604 Revision A:1971 | PLASTIC TUBING (FLEXIBLE, POLYURETHANE FILM) |
| MIL-T-55441 Base Document:1967 | TOWER AB-585()/G |
| MIL H 87174 : 0 | HELMET, FLYERS' HGU-55/P |
| MIL-S-5804 Revision C:1967 | SEAT, AIRCRAFT, TROOP, WALL STYLE |
| O-S-598 Revision B:1975 | SODIUM HYDROXIDE, TECHNICAL |
| MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
| MIL-S-55062 Base Document:1959 | SUPPORT, ANTENNA AB-461 ( ) GL |
| MIL-T-0012756 Revision B:1969 | TEST SET, BATTERY (BATTERY TESTER TS 183 () U) |
| L-H-00575 Base Document:1966 | HOLDER, DESK MEMORANDUM PAPER, SHEET TYPE |
| MIL-A-52879 Revision C:1992 | Alarm, Audible, BZ-204/FSS-9(V) (No S/S Document) |
| MIL-C-17576 Revision B:1971 | CELLULOSE ACETATE SHEET (FOR INHIBITORS) |
| MIL-L-43466 Revision C:1981 | Liner, Extreme Cold Weather, Parka (No S/S Document) |
| NNN P 1483 : D | PIPET, BACTERIOLOGICAL (PASTEUR TYPE) |
| MIL-C-87032 Revision B:1986 | COVERALLS DIVER'S (MK-12) |
| MIL-B-36162 Revision C:1987 | BLADES, LARYNGOSCOPE, MILLER |
| ZZ-R-768 Revision B:2009 | RUBBER FOR MOUNTINGS (UNBONDED-SPOOL AND COMPRESSION TYPES) |
| MIL-H-38471 Revision B:1972 | HAT AND INSECT NET HGU-18/P |
| DD-F-786 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, PORCELAIN, BUCHNER TYPE |
| MIL-D-87030 Revision B:1986 | DIVER DRESS SUIT (MK 12) |
| MIL-C-29105 Base Document:1971 | COAT, AMMUNITION CARRYING, BUOYANT, AND BLADDER, FLOTATION |
| MIL-S-13282 Revision B:1973 | SILVER AND SILVER ALLOYS |
| MIL-C-6183 Revision B:1981 | CORK AND RUBBER COMPOSITION SHEET, FOR AROMATIC FUEL AND OIL RESISTANT GASKETS |
| GGG-B-440 Revision B:1964 | Blade, Circular Saw, Woodcutting |
| TT-I-563 Revision F:1975 | INK, WRITING, FOR FOUNTAIN AND DIP PENS |
| H B 00555 : B | BRUSH, SCRUB, VEGETABLE |
| JJJ-B-81 Revision E:1976 | BALL, ABSORBENT, COTTON OR RAYON, NON STERILE |
| MIL-B-28644 Revision A:1988 | BED, BUNK, STEEL, SQUARE TUBE, WITH END PANELS, SINGLE AND DOUBLE-DECK |
| MIL-P-20691 Revision C:1987 | PLUG, EXPANSION |
| MIL-S-82567 Base Document:1968 | SPEED CONTROL ASSEMBLY LD546993 (FOR GUIDANCE CONTROL TEST SET MK 443 MOD O AND MOD 1) |
| MIL H 26499 : C | HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN |
| PPP-C-1266 Revision B:1969 | CONTAINER, THERMAL, SHIPPING FOR MEDICAL MATERIAL REQUIRING CONTROLLED TEMPERATURE RANGES |
| GG-L-00110 Revision A:1971 | LANCET, FINGER BLEEDING |
| DDD-T-551 Revision K:1977 | TOWEL, BATH, COTTON, TERRY |
| MIL-B-36893 Revision A:1975 | BRONCHOSCOPE, FIBER OPTIC, HOLINGER |
| MIL S 798 : C | SUPPORTER, ATHLETIC |
| MIL M 63045 : A | MANUAL, TECHNICAL, PREPARATION OF DEPOT MANUALS FOR DEPOT TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT |
| MIL-Y-16698 Revision C:1972 | YARN, COTTON |
| MIL D 5480 : F | DATA, ENGINEERING AND TECHNICAL REPRODUCTION REQUIREMENTS FOR |
| MIL-B-44199 Base Document:1985 | BANDOLEER XM 86 MINE |
| MIL C 25478 : B | COOLER, LUBRICATING OIL, AIRCRAFT ENGINE, SYNTHETIC OIL, GENERAL SPECIFICATION FOR |
| GG-H-1212 Revision A:1975 | HAMMER, REFLEX TESTING, TAYLOR |
| MIL-F-52847 Base Document:1975 | FILTER ELEMENT, FLUID PRESSURE, COALESCER, OILY WASTEWATER, EXPENDABLE, AND PREFILTER ELEMENTS, OILY WASTEWATER, EXPENDABLE |
| MIL-S-49036 Base Document:1974 | Suppressor, Electrical Transient (No S/S Document) |
| MIL-R-85363 Base Document:1981 | Rocket Motor Mark 23 Mods 2 & 3 |
| MIL-B-45548 Revision D:1988 | BEAD BREAKER, PNEUMATIC TIRE, PORTABLE (TIRE SIZES 14.00-24 THROUGH 37.5-33) |
| ASTM B 90/B90M : 2015 : REDLINE | Standard Specification for Magnesium-Alloy Sheet and Plate |
| MIL-P-43112 Revision B:1970 | PAPER, WRAPPING MEAT |
| MIL-C-13909 Revision C:1976 | CONDUIT, METAL, FLEXIBLE: ELECTRICAL SHIELDED |
| MIL-M-13787 Base Document:1954 | MOTOR, ALTERNATING CURRENT, FRACTIONAL HORSEPOWER, SQUIRREL CAGE (FOR COMMUNICATION AND OTHER ELECTRONIC AND SPECIAL MILITARY APPLICATIONS). |
| MIL-E-51223 Base Document:1968 | ENTRANCE, PROTECTIVE, PRESSURIZED, MISSILE VAN, COLLAPSIBLE, M7 |
| MIL-P-19918 Base Document:1952 | PACKING, V RING |
| MIL-M-14779 Base Document:1968 | MAGNESIUM OXIDE, CALCINED (FOR USE IN AMMUNITION) |
| MIL S 44408 : B | SHELTER, NON-EXPANDABLE, RIGID WALL (67 INCHES HIGH BY 84 INCHES WIDE BY 102 INCHES LONG) |
| GGG-J-65 Revision A:1965 | JOINTER, BRICK |
| DOD-F-70459 Base Document:1984 | FIBER, SHREDDED WOOD |
| MIL-B-3402 Revision C:1984 | BLOWER, GASOLINE-DRIVEN, AIRCRAFT VENTILATION, PORTABLE 2,900 CFM TYPE A-2 |
| MIL C 18757 : D | CARTRIDGE CASES, STEEL (OTHER THAN SMALL ARMS), GENERAL SPECIFICATION FOR |
| MIL-T-46938 Revision C:1994 | TETRACENE |
| MIL I 83287 : E | INDICATOR, FAULT LOCATING GENERAL SPECIFICATION FOR |
| SAE AS 6302 : 2016 | TRANSMITTER, PRESSURE, FUEL, 0-600 PSI |
| MIL-C-25731 Revision A:1968 | CRATES, WOOD, FOR DOMESTIC AND OVERSEAS SHIPMENT OF AIRFRAME COMPONENTS (2,OOO POUND MAXIMUM NET LOAD) |
| W-T-631 Revision C:1961 | TRANSFORMER, POWER DISTRIBUTION |
| DOD-C-51464 Base Document:1980 | CHLORAMINE B (METRIC) |
| MIL-U-17658 Revision D:1975 | UNIFORM, MAN'S (DRESS, WHITE) (NAVY) |
| MIL-C-21768 Revision A:1971 | COPPER ALLOY NUMBERS 210 (GILDING 95%) AND 220 (COMMERCIAL BRONZE 90%) SHEET AND STRIP |
| GG-F-620 Base Document:1960 | FORCEPS, TOWEL |
| QQ-C-530 Revision C:1971 | COPPER BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173) |
| GGG-P-441 Revision A:1965 | PLATES, ANGLE, ADJUSTABLE AND SOLID |
| L-C-001804 Base Document:1972 | CUSHION RING, INFLATABLE, PLASTIC |
| KK-L-201 Revision F:1963 | LEATHER, CATTLEHIDE, LACE, AND CUT LACES |
| MIL-A-23685 Revision B:1977 | ADAPTER, PALLET, STEEL FOR PROJECTILES, ROCKET HEADS, CARTRIDGE CONTAINERS AND BOMB FINS |
| MIL-P-3819 Revision D:1990 | PNEUMATIC TOOL OUTFIT, 600 CFM, COMPRESSED AIR, PACKAGING OF |
| MIL-A-25463 Revision B:1982 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-P-89305 Revision A:1994 | PLANNING TERRAIN ANALYSIS DATA BASE (PTADB) SCALE 1:250,000 |
| MIL-I-695 Revision B:1969 | INSULATION, ELECTRICAL, PAPER [SLOT CELL] |
| KK-P-001170 Revision A:1968 | PORTFOLIO, ENVELOPE, LEATHER, ARTIFICIAL LEATHER, SLIDE FASTENER |
| MIL C 18759 : B | CARTRIDGE CASE, STEEL, 20 MILLIMETER MK 5 AND MODS (FOR 20 MM A/C GUNS) |
| MIL-S-14197 Revision B:1977 | STUD, PHOTOGRAMMETRIC SLOTTED TEMPLETS |
| GGG-S-190 Revision A:1965 | SEAMER, SHEET METAL, HAND |
| C-B-002185 Base Document:1988 | BREAKFAST BAKE, THERMOSTABILIZED, TRAY PACK |
| DOD-P-15816 Revision C:1977 | PARTS, HARD RUBBER, FOR USE WITH SUBMARINE STORAGE BATTERIES (METRIC) |
| MIL-P-37748 Base Document:1978 | PSYCHROMETER, SLING |
| TT-C-499 Revision A:1975 | COATING COMPOUND, CHEMICAL RESISTANT, CLEAR |
| MIL R 83536 : SUPP 1 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY |
| MIL M 2082 : C | METERS, FLOW, MECHANICAL, VOLUMETRIC POSITIVE DISPLACEMENT, LIQUID, COLD WATER AND HOT WATER TYPE, NAVAL SHIPBOARD USE |
| MIL-C-13294 Revision C:1966 | CABLE, TELEPHONE, ELECTRICAL (INFANTRY FIELD WIRE, TWISTED PARI, WIRE WD-1/TT AND WD-14/TT |
| ZZ-C-730 Revision A:1973 | CUPS AND GLIDES, FURNITURE |
| GG-S-325 Base Document:1961 | SHIELD, EYE, SURGICAL, FOX |
| MIL F 6001 : A | FITTING, AIRCRAFT, SOLDER TYPE TUBE |
| MIL B 197 : F INT AMD 2 | BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES, PREPARATION FOR DELIVERY OF |
| MIL H 19448 : C NOTICE 1 | HAT, SERVICE, WITH CHIN STRAP |
| MIL-P-36907 Revision A:1976 | PIPET-DILUENT, BLOOD, LABORATORY |
| MIL A 41801 : C | APRON, LABORATORY, PLASTIC |
| MIL-O-44191 Revision A:1989 | OVERALLS, COLD WEATHER, SYNTHETIC FIBER PILE |
| MIL-I-83751 Base Document:1967 | INDICATOR, SAFETY LEVEL, RF |
| MIL-G-1086 Revision E:1975 | GASKET MATERIAL, SYNTHETIC RUBBER [FOR BOLTED STEEL TANKS] |
| MIL-F-51208 Base Document:1964 | FILTER ELEMENT AND RING ASSEMBLY |
| MIL C 27715 : 0 | CIRCUIT BREAKER, TRIP-FREE, HIGH TEMPERATURE, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-F-50043 Base Document:1959 | FILTER, PARTICULATE, 600 CFM, C18 |
| U-T-00190 Revision A:1964 | TEST PAPER AND COLOR CHART, GLUCOSE IN URINE, 100 TABLETS |
| MIL-B-41818 Revision G:1982 | BOOTS, COMBAT, LEATHER, BLACK, (MIL-5) |
| L-P-315 Revision C:1972 | PIPE, PLASTIC (POLYETHYLENE, PE, SDR-PR) |
| MIL-G-7734 Revision C:1981 | GAGE, PRESSURE ENGINE AND UTILITY AIRCRAFT |
| LLL-S-720 Revision A:1974 | STIRRING STICK, BEVERAGE (WOOD) |
| MIL-A-5540 Revision B:1967 | ADHESIVE, POLYCHLOROPRENE |
| MIL-A-37251 Base Document:1976 | ANTIDOTE, NERVE AGENTS, INJECTOR |
| MIL-A-36644 Base Document:1970 | APPLICATOR SET, PIN RETENTION, DENTAL |
| MIL W 55153 : A | WIND MEASURING SET AN/PMQ-3 ( ) |
| MIL-B-44225 Base Document:1986 | BREAKFAST BAKE, THERMOSTABILIZED, TRAY PACK |
| MIL-T-37594 Base Document:1977 | THERMOMETER, SELF INDICATING, LIQUID IN GLASS, INCUBATOR, O DEGREES TO 70 DEGREES C |
| MIL M 3996 : C | MATTRESSES (EXCEPT PNEUMATIC TYPE), PACKAGING AND PACKING OF |
| MIL-P-38027 Revision A:1973 | PRESSURE INDICATING SYSTEM, HYDRAULIC A/A27 J-1 |
| MIL-S-26716 Revision A:1982 | STAND, TEST, AIRCRAFT HYDRAULIC SYSTEMS, NON-PORTABLE |
| MIL-C-16385 Revision E:1972 | CARTRIDGE, CARBON DIOXIDE, INFLATABLE LIFE PRESERVER USE |
| MIL-V-8965 Revision B:1990 | VALVE CORE, OXYGEN, HIGH PRESSURE |
| MIL-C-43369 Revision A:1976 | CONTAINER ASSEMBLY, SAMPLE AND SPECIMEN SHIPPING, BOX TYPE, FOR MEAT AND DAIRY PRODUCT SAMPLES. |
| MIL E 44258 : A | ELECTRICAL DISTRIBUTION ASSEMBLIES FOR TENT, EXTENDABLE, MODULAR, PERSONNEL (TEMPER) |
| MIL-U-37667 Base Document:1978 | UNDECYLENIC ACID OINTMENT, COMPOUND, USP |
| MIL-F-36748 Base Document:1971 | FUNNEL, COMMON, LABORATORY POLYETHYLENE, OUTSIDE RIBBED |
| MIL L 20271 : D | LACE, GOLD: ORNAMENTAL. |
| MIL S 23769 : C | SEAL, SECURITY |
| MIL S 43243 : C | SEPARATOR, PARACHUTE REMOVABLE CONNECTOR LINK |
| MIL-B-44418 Base Document:1991 | Boot Wall, Fabric Assemblies, Standardized Integrated Command Post System (SICPS) (No S/S Document) |
| MIL-R-14328 Revision B:1975 | RUBBER SHEET, SYNTHETIC, MEDIUM SOFT, GENERAL-PURPOSE GASKET MATERIAL (FOR EXTREME CLIMATIC CONDITIONS) |
| AA-C-00288 Revision B:1968 | CHAIRS, FOLDING, WOOD, WITHOUT ARMS |
| MIL-C-87150 Base Document:1980 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-18 |
| MIL-C-10464 Revision F:1990 | CANS, HERMETIC SEALING, METAL, LIGHT CAGE, TEAR-STRIP TYPE |
| MIL-T-36966 Revision A:1978 | TUBING, NONMETALLIC, RUBBER |
| MIL S 24749 : 0 | STRAPS, ELECTRICAL GROUNDING (METRIC) |
| MIL-M-50974 Revision C:1983 | MOTOR DETONATOR ASSEMBLY, ROCKET, LOADING ASSEMBLING AND PACKING (FOR DEMOLITION KIT, CRATERING M180) |
| H-B-00681 Revision D:1968 | BRUSHES, TYPEWRITER |
| GG-R-563 Revision B:1957 | ROLL, ABSORBENT COTTON AND ROLL, CELLULOSE |
| MIL-B-13393 Revision E:1986 | BOMB, SMOKE OR INCENDIARY, AN-M47A4, 100 LB; INERT COMPONENTS FOR |
| MIL-P-24396 Revision A:1994 | PACKING MATERIAL, BRAIDED PTFE (POLYTETRAFLUOROETHYLENE) |
| HH-P-119 Revision A:1967 | PACKING MATERIAL, SEWER JOINT, ASPHALT-SATURATED CELLULOSE-FIBER |
| MIL-F-27656 Revision C:1987 | Filter Unit, Fluid, Pressure, MXU-408/M, Absolute, 5 Micron, Hydraulic |
| MIL S 11086 : D NOTICE 1 | STRAP, HOSE, AND LADDER |
| MIL-H-12225 Revision H:1990 | HOOD, GAS MASK, TOXICOLOGICAL AGENTS PROTECTIVE M-3 |
| MIL-C-27718 Revision D:1984 | CRANE, HYDRAULIC, TRUCK MOUNTED, A/S32A-16 16,5OO POUND CRANE CAPACITY, 6X4, DED |
| GG-C-00716 Revision C:1990 | CRUTCH, ADJUSTABLE, WOOD |
| MIL-P-52455 Revision A:1970 | PIN REGISTER PUNCH BOARDS, PIN REGISTER BARS AND PIN REGISTER PLATES |
| MIL-B-43308 Revision B:1969 | BINDING MACHINE, PLASTIC BINDING ELEMENT, AND PUNCHING MACHINE PAPER |
| MIL-S-43012 Revision C:1988 | SAMPLER, SOIL |
| MIL-D-36622 Base Document:1970 | DISH, BIOLOGICAL PREPARATION [STENDER DESIGN] |
| MIL-M-55564 Base Document:1969 | MAINTENANCE KIT, ELECTRONIC EQUIPMENT MK-1035/ARC-131 ( ) (UNITS OF) |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL-A-25896 Revision E:1983 | ADAPTER, PRESSURE FUEL SERVICING, NOMINAL 2.5 INCH DIAMETER |
| MIL-P-21386 Revision E:1985 | PAPER, FILTER MEDIA, ROLL-TYPE |
| MIL-A-10957 Revision G:1986 | ADAPTER KIT, GRAVITY FEED, FOR 5 GALLON MILITARY GASOLINE CAN AND 55 GALLON DRUM |
| MIL-F-47076 Revision A:1990 | FILM, POLYETHYLENE TEREPHTHALATE, METALLIZED |
| MIL T 15659 : H | TERMINAL, LUG, SOLDER, COPPER AND PHOSPHOR BRONZE |
| MIL-A-36955 Base Document:1973 | ANOSCOPE, FANSLER, 6 CM. |
| MIL-C-172 Revision C:1958 | CASES: BASES, MOUNTING & MOUNTS, VIBRATION (FOR USE WITH ELECTRONIC EQUIPMENT) |
| MIL-W-52815 Base Document:1974 | WASHER: INSULATING, FOR SPLIT-KNOB TYPE ELECTRICAL INSULATOR |
| MIL O 38338 : C (1) | OIL QUANTITY GAGING SYSTEM, CONTINUOUS TRANSISTORIZED NUCLEONIC, GENERAL SPECIFICATION FOR |
| MIL S 24251 : B | SHIELD, RETAINER (BASES), AND ADAPTERS, ELECTRON TUBE, HEAT DISSIPATING, GENERAL SPECIFICATION FOR |
| MIL R 13887 : B | RACE ASSEMBLY, TURRET TRAVERSING, FOR TANKS M46, M46A1, M48, M48A1, M48A2, M103 AND M103A1, PREPARATION FOR SHIPMENT AND STORAGE OF |
| MIL-B-1667 Revision F:1977 | BRAID, TEXTILE, CORD EDGE |
| MIL-G-36614 Revision A:1976 | GRADUATES, LIQUID LABORATORY, CORROSION RESISTING METAL |
| GGG-S-630 Revision D:1986 | SPREADERS, TIRE, PNEUMATICALLY OPERATED |
| MIL R 21335 : B NOTICE 2 | RELAY, POLARIZED, SENSITIVE, DIRECT CURRENT |
| MIL-L-52052 Revision D:1980 | LIFE PRESERVER, PARACHUTIST TYPE B-7 |
| MIL-M-43945 Revision B:1988 | Mask, Extreme Cold Weather (No S/S Document) |
| MIL-PRF-27626 Revision G:2016 | SAMPLER, CRYOGENIC LIQUID |
| NNN-B-001291 Base Document:1996 | BASKET TEST TUBE |
| MIL-T-47051 Revision A:1974 | TUBING, HEAT SHRINKABLE |
| MIL-B-36538 Revision A:1974 | BAG, BUCKSHOT |
| MIL-H-27269 Revision A:1977 | HORIZONTAL SITUATION INDICATOR GROUP AF A24J AND 1 |
| MIL R 39032 : D | RESISTOR, PACKAGING OF |
| MIL-A-24456 Base Document:1971 | ADHESIVE FOR PLASTIC VIBRATION-DAMPING TILE |
| MIL-B-14563 Revision C:1983 | BOOTH, SPRAYING, DRY (BENCH TYPE WITH LEGS) |
| MIL R 22449 : NOTICE 1 | REQUIREMENTS (CERTIFICATION) FOR PYROTECHNIC ITEMS |
| MIL C 19246 : C | CONNECTOR, OXYGEN MASK HOSE, TYPE MC-3A |
| MIL-A-18218 Revision B:1984 | ANALYZERS, FLUE-GAS, ORSAT-TYPE, PORTABLE |
| NNN-G-690 Base Document:1963 | GRADUATE LIQUID LABORATORY PLASTIC |
| MIL-S-3644 Revision B:1985 | SHAFT ASSEMBLY, FLEXIBLE |
| MIL-C-36165 Revision B:1976 | COVER, MATRESS, PLASTIC |
| MIL-C-55398 Base Document:1973 | COMPENSATOR, MAGNETIC FLUX CN-405 ( )/ASN |
| MIL-T-52073 Revision C:1974 | TANK ASSEMBLY, FABRIC COLLAPSIBLE 10,000 GALLON CAPACITY, PETROLEUM PRODUCTS, PACKAGING OF |
| MIL-G-52647 Base Document:1969 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED, 60 KW, 400 HERTZ, PU-707/M |
| GG-B-426 Revision B:1960 | BLOCK, BITE |
| DD-G-451 Revision D:1977 | GLASS, FLOAT OR PLATE, SHEET, FIGURED (FLAT, FOR GLAZING, MIRRORS AND OTHER USES) |
| MIL-P-63316 Base Document:1979 | PRIMER, BATTERY, ELECTRIC PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-C-81251 Base Document:1965 | CLOTH, SILICA, PHENOLIC IMPREGNATED |
| MIL-N-17163 Revision A:1959 | NICKEL-COPPER ALLOY, WROUGHT, (55-60 PERCENT NICKEL) LOW PERMEABILITY |
| MIL-P-18715 Base Document:1955 | PRIMER, ELECTRIC, MARK 46 MOD 0 |
| MIL-N-46026 Revision A:1965 | NICKEL ROD AND WIRE (ROUND) (FOR ELECTRONIC USE) |
| MIL-C-12927 Revision B:1963 | CARTRIDGE, IGNITION, M2E1 PARTS FOR, LOADING, ASSEMBLING AND PACKING |
| MIL R 83936 : B | REMOVER, PAINT, TANK TYPE, FOR AIRCRAFT WHEELS, LANDING GEAR COMPONENTS, AND OTHER AIRCRAFT AND AGE COMPONENTS |
| MIL-G-558 Revision B:1969 | GUANIDINE CARBONATE, TECHNICAL |
| AA-B-60 Base Document:1959 | BASSINET AND DRESSING TABLE COMBINATION, HOSPITAL, CORROSION-RESISTING STEEL |
| MIL-J-29634 Base Document:1992 | JERSEY, FLIGHT DECK CREWMANS (FLAME-RESISTANT) |
| MIL-V-82440 Base Document:1966 | VALVE, FUEL INTERLOCK |
| MIL-I-11695 Revision C:1969 | IRON, MAGNETIC: BAR, SHEET AND STRIP |
| N-R-002146 Base Document:1982 | RICE, SPANISH, THERMOSTABILIZED, TRAY PACK |
| MIL-W-52686 Revision B:1983 | WELDING SET, ARC, INERT GAS SHIELDED PACKAGING OF |
| MIL-A-23894 Base Document:1963 | ALPHA-NITRONAPHTHALENE (FOR USE IN EXPLOSIVES) |
| MIL H 53064 : A | HOSE ASSEMBLY, ELASTOMER, LIGHTWEIGHT, COLLAPSIBLE - LIQUID FUEL |
| MIL-R-23057 Base Document:1961 | Regulator, Compressed Air, High Pressure (3500 PSI) |
| MIL-P-44012 Revision A:1979 | PACK, PARACHUTIST'S, DRAGON MISSILE |
| MIL-M-24913 Base Document:1984 | MASK, EXTREME COLD WEATHER, DRY AND WET COLD |
| MIL-D-70669 Base Document:1987 | DELAY ELEMENT, LOADING, ASSEMBLING AND PACKING |
| GGG-C-137 Revision A:1964 | CAP, VICE JAW |
| MIL-M-21124 Base Document:1957 | MINE CASE MARK 25 MOD 1 |
| GGG-H-20 Revision A:1961 | HAMMER, HAND, (BODY AND FENDER, FORGED STEEL HEAD) |
| MIL-STD-1666 Revision B:1988 | CLASSIFICATION OF DEFECTS FOR EVALUATING QUALITY OF ALUMINIZED FIREMEN'S CLOTHING |
| MIL-P-43090 Revision B:1974 | PLASTIC MOLDING MATERIAL, ASPHALT, ASBESTOS FILLED |
| MIL-S-55094 Base Document:1960 | STAKE, GUY AND OTHER HARDWARE FOR ANTENNA MASTS |
| MIL-A-29423 Base Document:1986 | ANTENNA: AS-()/GRC; MICROWAVE |
| MIL-C-81567 Base Document:1967 | CARTRIDGE, DELAY, MARK 101 MOD O |
| GG-L-340 Base Document:1960 | LIGHT, COLOR PERFECTION TESTING |
| MIL-R-11019 Revision B:1955 | REEL UNIT RL&128 ()-G |
| MIL-G-13590 Revision A:1957 | GRENADE, RIFLE, SMOKE, M22A2, CHEMICAL LOADING ASSEMBLY |
| O-S-634 Revision B:1970 | SODIUM NITRATE, TECHNICAL (NITRATE OF SODA) |
| MIL-T-43238 Revision C:1984 | TABLE, SHADOW, PARACHUTE CANOPY INSPECTION |
| MIL-M-18598 Base Document:1955 | MARKER, LOCATION, MARINE, MK 2 MODS |
| GGG-R-00395 Base Document:1966 | RIVETER, BLIND, HAND AND HEADS |
| MIL-B-23388 Revision A:1969 | BURSTERS FOR WP FILLED 5-INCH 54-CALIBER AND 6-INCH 47-CALIBER PROJECTILES; LOADING AND PACKING |
| MIL-I-19210 Revision C:1976 | IGNITER, TORPEDO, MARK 6 MOD 4 |
| MIL-L-48772 Revision A:1981 | Lithium (for Use in Ammunition) |
| MIL-Z-12061 Revision B:1983 | ZINC CARBONATE, BASIC, TECHNICAL |
| MIL-D-13796 Revision A:1962 | DI-2 ETHYLHEXYLPHTHALATE |
| MIL-G-63431 Base Document:1981 | GUANIDINE NITRATE (GN) |
| MIL-B-2873 Revision D:1985 | BOAT CLOTH |
| MIL-T-20193 Revision D:1978 | TABLE, STEREOPLOTTER, PROJECTION: MULTIPLEX, WITH CHEST |
| MIL-C-10597 Revision E:1983 | CLEANING COMPOUND WITH CONDITIONER AND INHIBITOR FOR ENGINE COOLING SYSTEMS |
| MIL C 51428 : B | CANISTER, CHEMICAL PROJECTILE, OPA M21 |
| MIL-F-45400 Revision A:1968 | FIN ASSEMBLY, BOMB, 4-POUND, M15 |
| MIL S 50419 : A NOTICE 1 | SPACER, FOR 2.75 INCH ROCKET, MARK 40 AND MARK 4 |
| MIL-C-8956 Revision A:1970 | CLAMP, LOOP TUBE SUPPORT |
| MIL-Z-63472 Base Document:1980 | ZINC ALUMINUM SUPERPLASTIC ALLOYS FOR THERMO FORMING, DEEP DRAWING AND STRETCH FORMING |
| O-S-605 Revision D:1967 | SODIUM SILICATE SOLUTION |
| MIL-S-82489 Base Document:1967 | SWITCH, DRIVER MARK 76 MOD 0 |
| MIL-C-38334 Revision A:1971 | CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
| MIL C 38618 : A | COUPLER, DRIVE ASSEMBLY GOVERNOR, FUZE BOMB MAU 87A B |
| MIL-L-44299 Revision A:1990 | LINER, COMBAT VEHICLE CREWMEN'S COVERALL |
| MIL-P-20307 Revision A:1965 | POLYVINYL CHLORIDE (FOR USE IN PYROTECHNICS) |
| MIL-C-38979 Revision A:1978 | Cartridge, Bomb Ejection CCU-1/B |
| MIL-B-37173 Base Document:1975 | BOXES, SETUP, MAILING, DENTAL |
| HH-I-1972-6 Base Document:1981 | INSULATION BOARD, THERMAL, POLYURETHANE OR POLYISOCYANURATE FACED WITH MINERAL FIBERBOARD ON ONE SIDE OF THE FOAM AND GLASS MAT ON THE OTHER SIDE OF THE FOAM |
| MIL I 85756 : 0 | INCENDIARY COMPOSITION |
| NN-H-93 Revision C:1995 | HANDLE, HICKORY, STRIKING TOOL |
| MIL I 5392 : A NOTICE 1 | INDICATOR, AIRSPEED PITOT STATIC TYPE K AND 3 |
| MIL R 14330 : A NOTICE 1 | RIFLE, AUTOMATIC, CAL. .30, BROWNING M1918A2, PACKAGING OF |
| FF-H-1820 Base Document:1974 | HARDWARE, BUILDERS, EXIT DEVICES |
| MIL J 82193 : B | JACKET, MAN'S, EVENING DRESS (OFFICERS) |
| MIL-S-14249 Revision C:1981 | STRAIGHTEDGE, RADIAL LINE, SLOTTED TEMPLET. |
| GGG-W-680 Revision A:1964 | WRENCHES, TAP AND REAMER, ADJUSTABLE |
| X-K-001274 Revision A:1969 | KIT, CLASSIFIED DOCUMENT DESTRUCTOR, DRUM TYPE |
| MIL-P-87932 Base Document:1978 | PROPELLANT, LIQUID NEON |
| SAE AS 85352 : 2011 | INFLATOR ASSEMBLY AND GAGE ELEMENTS, PNEUMATIC PRESSURE, REMOTE CONTROL, DIRECT READING |
| MIL-S-37414 Base Document:1976 | STANNOUS FLUORIDE, USP |
| MIL-I-23252 Revision B:1981 | INDICATOR, PRESSURE |
| MIL-A-83995 Revision A:1984 | AUTOMATED DATA PROCESSING EQUIPMENT, (MAJOR COMPONENTS) PACKAGING OF |
| MIL-A-4637 Base Document:1953 | ATTENUATOR CN 29()/UP, CN-42()/UP, CN-43()/UP |
| DOD-HDBK-791 Base Document:1988 | MAINTAINABILITY DESIGN TECHNIQUES |
| MIL-T-12681 Revision A:1955 | TEST SET, TELEPHONE (TEST SET TS-190)(/U) |
| A-A-2757 Base Document:1991 | PENCIL, CARPENTER |
| MIL-PRF-55585 Revision G:1997 | ELECTRONICS EQUIPMENT AND PARTS, PACKAGING OF |
| MIL-P-51104 Revision A:1970 | PROTECTOR, INFANT, M2 |
| MIL-W-81244 Base Document:1965 | WETTING AGENT |
| MIL-S-81771 Revision A:1975 | Seat System; Aircrew, Crash Resistant; General Specification for |
| MIL-B-36039 Revision B:1989 | BAG, GUN CREW FIRST AID KIT |
| MIL-R-21931 Revision A:1977 | RESIN, EPOXY |
| MIL P 14030 : NOTICE 1 | PLATINUM, ANALYZED REAGENT |
| MIL-M-11982 Revision A:1953 | MOUNT, AA, MACHINE GUN, CALIBER .50, M63 (W/SPARE PARTS) |
| JJ-S-746 Revision A:1956 | STOCKINET, SURGICAL |
| MIL-I-25645 Revision D:1970 | INDICATOR, LIQUID OXYGEN QUANTITY, CAPACITANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-S-85508 Base Document:1981 | Spectacles, Aviator\'s, Neodymium Laser Protective, EDU-1/P (with case) |
| MIL-S-38228 Base Document:1964 | SEALING COMPOUND, ENVIRONMENTAL, FOR AIRCRAFT SURFACES |
| FF-C-436 Revision F:1988 | CLIP, PAPER, WIRE |
| MIL W 583 : C | WIRE, MAGNET, ELECTRICAL |
| MIL-M-43248 Revision C:1982 | MATS, REINFORCING, GLASS FIBER |
| MIL-T-13057 Revision C:1981 | THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (FOR PRECISION LEVEL ROD) |
| ASTM F 1697 : 2009 : R2015 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit |
| MIL I 81577 : A | IGNITION ELEMENT, ELECTRIC, MARK 17 MOD 0 |
| MIL-C-29119 Base Document:1973 | CLOTHING, CHEMICAL AGENT PROTECTIVE 5 AND 10 MAN OUTFITS, TREATMENT PACKAGING AND PACKING OF |
| MIL-L-13283 Revision C:1990 | LEAD-ANTIMONY (FOR USE IN AMMUNITION) |
| GG-S-805 Revision B:1977 | SURVEYOR, DENTAL CLASP |
| MIL-P-52981 Base Document:1980 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| GGG-V-412 Revision B:1994 | VISE: HAND; PIN; WIRE ROPE SPLICING; AND SQUARE END SAWING, TUBE |
| MIL-DTL-31009 Base Document:1995 | HOOD, COLD WEATHER, SECURITY POLICE |
| MIL-G-13210 Base Document:1954 | GASKET, RUBBER |
| MIL-S-22215 Revision A:1968 | SILVER-COPPER-CADMIUM-NICKEL-ALLOY |
| MIL-I-706 Revision A:1962 | IRON OXIDE, FERRIC, RED DRY [NATURAL AND SYNTHETIC] |
| MIL-G-25667 Revision B:1970 | GLASS, MONOLITHIC, AIRCRAFT GLAZING |
| MIL-STD-3028 Base Document:2009 | JOINT MODULAR INTERMODAL CONTAINER |
| MIL-O-81151 Revision A:1970 | OSCILLATOR SUBASSEMBLY (NAVORD DWG 1563736)(FOR TORPEDO MARK 37 MODS O, 2, AND 3) |
| MIL-DTL-25561 Revision B:1995 | GRIP ASSEMBLY, CONTROLLER, AIRCRAFT, TYPE MC-2 |
| MIL I 8136 : A | INDICATOR, FUEL FLOW RATE, SYNCHRO STYLE, SINGLE CLAMP MOUNTED 2 INCH SIZE 300 TO 3,000 PPH TYPE A 12 |
| MIL-R-9221 Base Document:1953 | RELAY, FIELD CONTROL, GENERATOR 24 VOLT DC TYPE M AND 2 |
| MIL-DTL-55422 Revision B:2011 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR |
| ASTM C 725 : 1990 : R2008 | Standard Specification for Semidense Mineral Fiber Siding |
| DEFSTAN 05-132/1(2017) : 2017 | MARKING OF SERVICE MATERIEL ITEMS USING A UNIQUE ITEM IDENTIFIER (UII) |
| MIL-C-7488 Revision A:1974 | COOLERS, OIL, PLATE, AIRCRAFT |
| UU-B-790 Revision A:1968 | BUILDING PAPER, VEGETABLE FIBER, (KRAFT, WATERPROOFED, WATER REPELLENT AND FIRE RESISTANT) |
| MIL-F-45569 Revision C:1988 | FIXTURE, LATHE, METAL CUTTING |
| MIL-HDBK-1791 Base Document:1997 | DESIGNING FOR INTERNAL AERIAL DELIVERY IN FIXED WING AIRCRAFT |
| ASTM A 421/A421M : 2015 : REDLINE | Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete |
| MIL-A-51009 Revision A:1962 | AIR-FILTER MEDIUM |
| FF-P-110 Revision J:1997 | Padlock, Changeable Combination (Resistant to Opening by Manipulation and Surreptitious Attack) |
| MIL-P-47067 Base Document:1974 | PENTANEDIONE, 2, 4 |
| MIL-DTL-25666-2 Base Document:1995 | CONVERTER, LIQUID OXYGEN GCU-3/A |
| MIL P 6074 : A | PRESERVATION, PACKAGING AND PACKING OF PROPELLERS, PROPELLER SPARES AND PROPELLER ACCESSORIES |
| MIL E 82902 : 0 | EXPLOSIVE, PLASTIC BONDED, CAST PBXN-111 |
| MIL-C-19547 Revision B:1969 | CABLE, ELECTRICAL, SPECIAL PURPOSE, SHORE USE |
| MIL-I-85491 Base Document:1981 | INSULATION MATERIAL, POLYISOPRENE |
| MIL-R-7051 Revision A:1966 | RELAY BANK, BOMB SALVO CIRCUIT 3 UNIT, 28 VOLT DC TYPE A 1 |
| MIL-A-81327 Revision A:1985 | ACOUSTIC LOCATING DEVICE (FOR TORPEDO MK 46 MOD O) |
| MIL-P-81994 Base Document:1975 | PROPELLANT FOR 20 MM, AMMUNITION |
| MIL-DTL-32096 Revision A:2002 | CARTRIDGE CASE, STEEL, 5-INCH, MK 9 MOD 3 (54 OR 62 CALIBER) |
| MIL-Q-47057 Revision A:1990 | QUARTZ, FUSED, OPTICAL GRADE |
| MIL-R-6336 Revision D:1970 | RECTIFIER, SILICON, DIRECT CURRENT, TRAINER POWER SUPPLY, TYPE F-1 |
| MIL-G-14451 Revision C:1993 | GUN, SUBCALIBER, CALIBER .30: M9 |
| MIL-H-37249 Base Document:1975 | HALOPROGIN CREAM |
| MIL-W-21632 Base Document:1958 | WIRE ROPE, STEEL, BARE AND NYLON COVERED CORROSION RESISTING, FLEXIBLE, PREFORMED, OCEANOGRAPHIC AND BATHYTHERMOGRAPHIC |
| MIL A 46063 : G | ARMOUR PLATE, ALUMINUM ALLOY, 7039 |
| ASTM C 221 : 1998 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| MIL-G-48344 Base Document:1974 | GYPSUM, DEAD BURNED |
| MIL R 17604 : C NOTICE 1 | RECORDING EQUIPMENT, CARBON DIOXIDE, AUTOMATIC |
| MIL-B-85251 Base Document:1981 | BOMB, BINARY CHEMICAL, EMPTY (BLU-80/B) |
| MIL-A-29426 Base Document:1987 | ANTENNA: AS-3569/VRC |
| GGG-N-350 Revision A:1959 | NIPPERS AND PINCERS |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| MIL M 46888 : A | MAGNET MATERIALS, PERMANENT |
| MIL-I-46175 Revision A:1983 | |
| MIL-E-24572 Revision B:1992 | EXTINGUISHER, FIRE, BROMOTRIFLUOROMETHANE (HALON 13O1) SYSTEMS (FIXED PIPE, PNEUMATICALLY ACTUATED, NAVAL SHIPBOARD USE) |
| MIL J 21994 : B NOTICE 1 | JUNCTION BOX MARK 43 MOD O |
| MIL-T-63420 Base Document:1981 | THIONYL CHLORIDE ELECTROLYTE (FOR USE IN AMMUNITION) |
| MIL-C-19397 Base Document:1956 | Compensator, Inertia, for AS-473/ASB-1 (Buord Drawing 790394 Inertia Compensating Unit) |
| GG-B-814 Revision B:1959 | BURNER, ALCOHOL, PRESSURE-TYPE |
| MIL-D-8181 Revision B:1965 | DETECTOR, ICE, AIR INTAKE DUCT, AIRCRAFT ENGINES AND AIRFRAME SYSTEMS GENERAL SPECIFICATION FOR |
| MIL-C-23465 Base Document:1962 | CONNECTION, FLEXIBLE, PIPE LOOPS, FOR STEAM TO MAIN AND AUXILIARY TURBINES (SIZES 4 AND 6 INCHES IPS) |
| MIL-C-85256 Base Document:1981 | CARTRIDGE, IMPULSE, CCU-13/B |
| MIL-DTL-25666-7 Base Document:1995 | Converter, Liquid Oxygen Type ME-3 |
| MIL-PRF-63005 Revision E:2008 | MANUALS, TECHNICAL: PREPARATION FOR SHIPMENT OF ARMY AIRCRAFT |
| MIL T 18497 : 0 | TEST SET, RADIO AN/ARM-25 |
| MIL PRF 38804 : C | TIME COMPLIANCE TECHNICAL ORDERS - PREPARATION |
| MIL-I-81023 Revision D:1985 | INDUCTOR, 28V, D.C. LABORATORY TEST GENERAL SPECIFICATION FOR |
| MIL-B-38977 Base Document:1968 | Bomb, Practice BDU-38/B |
| MIL-T-50777 Revision A:1990 | TUBE, ALUMINUM ALLOY 2024 SEAMLESS (FOR PROPELLANT ACTUATED DEVICES) |
| MIL-P-81237 Base Document:1965 | |
| MIL-M-21383 Revision A:1976 | Manganese Delay Composition |
| MIL-F-81150 Revision A:1971 | FILTER, BANDPASS (NAVORD DWG 1653728) |
| MIL-D-8694 Base Document:1954 | DELAY LINE MX 1381/APM 66 |
| MIL-C-82177 Revision A:1972 | COMMERCIAL REPAIR PARTS SUPPORT, GENERAL SPECIFICATION FOR |
| MIL-I-28947 Revision C:1993 | ILLUSTRATIONS FOR STOCK LIST PUBLICATIONS: PREPARATION OF |
| MIL-W-17247 Revision B:1974 | Wind Measuring Set AN/UMQ-5 (Components of) |
| MIL-A-19083 Revision C:1987 | ACOUSTIC DEVICES, MINESWEEPING, A MARK 4 (V) MOD 1 AND MARK 4(V) NM |
| MIL G 82673 : LATEST | GRAPHITE, NATURAL, POWDERED, TECHNICAL |
| MIL E 82592 : 0 | EXERCISE HEAD, IMPACT, MK 86 MOD O (FOR TORPEDO MK 37 MODS O, 2, AND 3) |
| MIL-A-85495 Base Document:1981 | ANTIOXIDANT, T-BUTYLPHENOL TYPE 2, 2'-METHYLENEBIS (4 METHYL-6-T-BUTYLPHENOL) |
| MIL-PRF-71196 Base Document:2002 | Sensor, Vehicle Motion |
| MIL-C-82620 Revision A:1974 | CONNECTOR, TORPEDO TUBE CABLE, MK 47 MOD O AND MK 48 MOD O |
| MIL M 63002 : F | MANUAL, TECHNICAL, REQUIREMENTS FOR PREPARATION OF MODIFICATION WORK ORDERS |
| MIL-M-38781 Revision E:1984 | MANUAL, CHECKLISTS AND SOURCE DATA, STORAGE AND MAINTENANCE PROCEDURES (FOR NON-NUCLEAR AND CHEMICAL MUNITIONS/BIOLOGICAL RESEARCH AGENTS) |
| MIL P 25604 : D (1) | PROPELLANT, uns-DIMETHYLHYDRAZINE |
| MIL-P-19161 Revision A:1956 | PLASTIC SHEET, LAMINATED, GLASS CLOTH POLYTETRAFLUOROETHYLENE RESIN |
| MIL C 11162 : 0 | CALCIUM FLUORIDE, REAGENT, POWDER |
| MIL-I-27665 Revision B:1984 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE ABU-1O/A, -50 DEGREES TO +50 DEGREES C |
| MIL-P-231 Revision A:1955 | PROPELLANT, PYROCELLULOSE |
| MIL-C-14383 Revision D:1974 | CANNON, 106 MM RECOILLESS RIFLE, M206 AND M206A1 |
| MIL-A-3664 Base Document:1962 | AURAMINE HYDROCHLORIDE (FOR COLORED SMOKE MIXTURES) |
| MIL-C-55532 Revision A:1969 | CHARGER, BATTERY PP-1600 ( ) /G |
| MIL-R-7611 Base Document:1952 | RELAY ARMATURE, TYPE MA AND 1 |
| MIL-A-82430 Revision A:1968 | ACTUATOR ASSEMBLY (FOR TORPEDO MK 46 MOD 1) |
| MIL-B-10854 Base Document:1951 | BINDER, CELLULOSE NITRATE-CAMPHOR (FOR PYROTECHNIC MIXTURES) |
| MIL-T-82846 Base Document:1990 | THREAD, SPLICING, NYLON |
| MIL-B-5046 Revision D:1968 | BOARD, CHART PLOTTING MARK 7 [ASG] |
| MIL Z 82674 : LATEST | ZIRCONIUM CARBIDE, POWDERED, TECHNICAL |
| MIL S 47086 : 0 | STEEL, CHROMIUM VANADIUM ALLOY |
| L-P-390 Revision C:1971 | PLASTIC, MOLDING AND EXTRUSION MATERIAL, POLYETHYLENE AND COPOLYMERS (LOW, MEDIUM AND HIGH DENSITY) |
| MIL C 82114 : B | COAT FRONT: FOR COATS, MUSCICIANS |
| MIL I 26359 : B | INDICATOR, ATTITUDE, REMOTE ARU-4/A |
| MIL M 11495 : C | METER, DETERGENT CONCENTRATION, FOR DISHWASHING MACHINE |
| MIL-P-9389 Revision A:1987 | PUMP PRESSURE, OIL AND FREE AIR, TYPE MA AND 3 |
| P-C-444 Revision B:1983 | CLEANING COMPOUND, SOLVENT SOLUBLE, GREASE EMULSIFYING |
| MIL A 24215 : A | ATTENUATORS, VARIABLE (COAXIAL AND WAVEGUIDE), GENERAL SPECIFICATION FOR |
| ASTM A 159 : 1983 : R2015 | Standard Specification for Automotive Gray Iron Castings |
| ASTM A 823 : 1999 : R2003 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| GGG-M-125-6 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING, COMBINATION CHEMICAL CARTRIDGE AND FILTER (FOR PAINT SPRAY AND ORGANIC VAPORS) |
| UU-C-1846 Base Document:1975 | COAT, LABORATORY, DISPOSABLE |
| MIL T 62410 : LATEST | TUBE ASSEMBLY METAL, SWAGED HYDRAULIC, (M1 TANK) |
| MIL P 23971 : B | POWER DIVIDERS, POWER COMBINERS AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-A-40032 Revision E:1986 | APRON, MEAT CUTTER'S |
| MIL-I-27203 Revision B:1987 | Indicator, Position, Wing Flap |
| MIL-B-60410 Base Document:1966 | BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY |
| MIL T 45056 : A | TANK RECOVERY VEHICLE,HEAVY N51, PREPARATION FOR STORAGE & SHIPMENT . |
| FED-STD-802 Base Document:1991 | PACKAGING OF SYNTHETIC FIBER FABRICS |
| MIL-G-83380 Base Document:1979 | GENERATOR SET, GAS TURBINE ENGINE DRIVEN, 30 AND 60 KW, 400 HZ |
| MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-I-55538 Base Document:1968 | INFLATION LAUNCHING DEVICE, BALLOON, METEOROLOGICAL ML-594( )/U |
| MIL G 43976 : C | GLOVE & GLOVE SET, CHEMICAL PROTECTIVE |
| MIL-S-52881 Revision B:1989 | SERVICING UNITS, COMPRESSED GAS, MOBILE |
| MIL-P-83126 Revision A:1980 | PROPULSION SYSTEMS, AIRCREW ESCAPE, DESIGN SPECIFICATION FOR |
| MIL-C-13998 Revision H:1982 | CAP, SERVICE, WOOL, ARMY GREEN 44 |
| MIL-DTL-62327 Revision B:1985 | CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC) |
| MIL-E-5607 Revision F:1983 | ENGINE, GAS TURBINE, PREPARATION FOR STORAGE AND SHIPMENT OF, PROCESS FOR |
| MIL-DTL-83522 Revision E:2013 | Connectors, Fiber Optic, Single Ferrule, General Specification for |
| MIL-P-20088 Revision C:1986 | PRESERVATION SOLUTION CONCENTRATE, SONAR SEA CHEST |
| O-C-650 Revision B:1975 | CORRECTION FLUID, WHITE OPAQUE; AND THINNER |
| MIL-E-22267 Revision A:1963 | Explosive Composition, HBX Type |
| MIL-S-29149 Revision C:1988 | SHIRT, MANS POLYESTER AND WOOL, LONG SLEEVE |
| WW-P-401 Revision F:1989 | PIPE AND PIPE FITTINGS, CAST IRON, SOIL |
| A-A-976 Revision A:1980 | PENCIL, LEAD DRAWING |
| MIL P 24790 : 0 | PACKING MATERIAL, BRAIDED, NON ASBESTOS |
| MIL C 6799 : J | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, WATER EMULSION |
| MIL-M-37323 Revision A:1976 | METHICILLIN SODIUM FOR INJECTION USP |
| MIL-C-37325 Revision A:1976 | |
| MIL-K-37522 Base Document:1976 | KANAMYCIN SULFATE INJECTION USP |
| MIL-H-37781 Base Document:1978 | HYDROXYZINE HYDROCHLORIDE INJECTION, NF |
| MIL-T-37680 Base Document:1977 | THIOPENTAL SODIUM FOR INJECTION USP |
| MIL-S-37364 Revision B:1976 | SODIUM NITRO PRUSSIDE FOR INFUSION |
| MIL-T-47064 Revision A:1991 | |
| MIL A 24699 : 0 | ACOUSTICAL TRANSMISSION LOSS BARRIER MATERIAL |
| MIL-R-37430 Base Document:1976 | RABIES VACCINE, VETERINARY MODIFIED LIVE VIRUS |
| MIL-C-37287 Revision A:1976 | CEPHALOTHIN SODIUM FOR INJECTION |
| DOD P 24647 : A (2) | PAINT, ANTIFOULING, SHIP HULL (METRIC) |
| MIL-R-53086 Base Document:1988 | RUST CONVERTER, METRIC |
| MIL-S-11030 Revision F:1990 | SEALING COMPOUND, SINGLE-COMPONENT, NON-CURING, POLYSULFIDE BASE |
| MIL-I-37912 Base Document:1978 | IRON DEXTRON INJECTION, USP |
| MIL-C-22542 Revision B:1987 | CLEANING COMPOUND, HIGH PRESSURE CLEANER, LIQUID |
| MIL-T-19646 Revision A:1990 | THERMOMETER, REMOTE READING, SELF-INDICATING DIAL, GAS ACTUATED |
| MIL-P-15877 Revision D:1973 | PIPE SUPPORT DEVICES (HANGERS AND SWAYBRACES, SHIPBOARD USE) |
| MIL-N-85729 Base Document:1988 | NUT, SELF-LOCKING, A-286, 160 KSI FTU, 450 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-PRF-82815 Base Document:1989 | LIQUID, ANTISTATIC |
| MIL W 18445 : D | WINDOWS, NON-ICING, LAMINATED FLAT GLASS, ELECTRICALLY HEATED, WITH CONTROLS |
| MIL-S-13119 Revision E:1984 | SPREADER, SLING, PLATE TYPE, NONADJUSTABLE |
| MIL P 81305 : A | POWER, DISTRIBUTION PANEL, ALTERNATING CURRENT, F-4 AIRCRAFT, SPECIFICATION FOR |
| MIL I 52701 : B | INDICATOR SOLUTION, PH DETERMINATION (RANGE 3.0 TO 11.0) |
| MIL-P-85034 Base Document:1976 | POWER PACKAGE, EMERGENCY AC/DC GENERATOR, RAM AIR TURBINE DRIVEN |
| MIL-B-85584 Revision B:1995 | BATTERY RELAY CONTROL UNIT, AIRCRAFT |
| MIL-F-81254 Base Document:1965 | FOAM, URETHANE |
| MIL-D-9898 Revision C:1986 | DRAWING, TUBE BEND |
| MIL C 48656 : A | CARTRIDGE, SHOTSHELL |
| NASA MSFC SPEC 384 : 1964 | LEAK TEST COMPOUND, LOX COMPATIBLE |
| MIL-V-22687 Revision C:1989 | VALVE, BALL, NAVAL SHIPBOARD, FOR AIR, NITROGEN, HELIUM OR HYDRAULIC SERVICE (SIZE 2 1/2 INCHES IPS AND BELOW) |
| MIL S 437 : D (1) | |
| O-O-690 Revision C:1992 | OXALIC ACID, DIHYDRATE, TECHNICAL |
| MIL C 18186 : D | CROWNS, SERVICE CAP |
| MIL-R-8373 Revision A:1954 | RELAY, CURRENT TYPE D 1 [115 VOLTS 400 CYCLE SINGLE POLE] |
| MIL T 9195 : A NOTICE 2 | TRANSMITTER, INDUCTION COMPASS, STABILIZED, TYPE MG 1 |
| MIL C 28748 : B | CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR |
| MIL S 27626 : F | SAMPLER, CRYOGENIC LIQUID |
| IPC SM 817 : A | GENERAL REQUIREMENTS FOR DIELECTRIC SURFACE MOUNTING ADHESIVES |
| MIL-P-47005 Base Document:1974 | PASTE, COLOR CONCENTRATE, EPOXY RESIN BASE |
| SAE AS 85080 : 2012 | INSULATION SLEEVING, ELECTRICAL, SHRINKABLE WITHOUT HEAT, GENERAL SPECIFICATION FOR |
| MIL-B-63354 Revision A:1987 | |
| AA-B-001596 Revision A Interim Revision:1974 | BOOKCASE, WOOD, GENERAL OFFICE |
| MIL-B-26026 Revision B:1967 | BATTERY, STORAGE, AIRCRAFT, TYPE MA-2-1 |
| MIL-S-29411 Revision B:1988 | SHELTER ASSEMBLIES, 10 FOOT AND 20 FOOT ELECTROMAGNETIC INTERFERENCE |
| MIL-DTL-25421 Revision C:2009 | Plastic Materials, Glass Fiber Base - Epoxy Resin, Low Pressure Laminated |
| MIL-C-82644 Base Document:1975 | COMPOUNDS, EPOXY, ENCAPSULATING |
| NASA KSC SPEC E 0024 : 2008 | CABLE, ELECTRICAL, SHIELDED, JACKETED, FOR HARNESS ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL C 82144 : A | CHARGER, BATTERY; MULTICHANNEL, PP-6241/U |
| MIL-B-46066 Revision B:1983 | BANDS, ROTATING, COPPER ALLOY, CENTRIFUGAL CAST (FOR CRITICAL APPLICATIONS) |
| MIL-C-87165 Base Document:1983 | COLLAR, JACKET, DETACHABLE CWU-63/P |
| MIL A 46193 : 0 | ARMOR PLATE, CONTROL ROLLED, STEEL, WROUGHT, HIGH STRENGTH, HIGH QUALITY |
| MIL A 46083 : B | ALUMINUM ALLOY ARMOR, EXTRUDED, WELDABLE |
| MIL C 18757/5 : A | CARTRIDGE CASE, STEEL, 76-MILLIMETER (62-CALIBER) |
| MIL-P-44242 Revision C:1993 | PORK AND BEANS, THERMOSTABILIZED, TRAY PACK |
| SAE AMS C 81986 : 1998 | CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS |
| MIL-C-13516 Revision E:1979 | CIRCUIT BREAKERS; MANUAL AND AUTOMATIC (28 VOLTS) |
| MIL-R-7871 Revision A:1979 | ROPE, EXTRA HIGH STRENGTH WIRE, 6 BY 19 WITH 7 BY 7 INDEPENDENT WIRE ROPE CENTER [FOR AIRCRAFT LAUNCHING AND RELATED APPLICATIONS] |
| MIL-B-15237 Revision B:1954 | BATHYTHERMOGRAPHS, SURFACE VESSEL |
| MIL-C-14384 Revision D:1989 | CANNON, 105 MM HOWITZER, M2A2 |
| ASTM A 536 : 1984 : R2009 | Standard Specification for Ductile Iron Castings |
| MIL P 22636 : NOTICE 1 | PRIMER COATING; FOR RED FUMING NITRIC ACID RESISTANT PAINT |
| MIL S 0044384 : A | SUIT, CONTAMINATION AVOIDANCE, LIQUID PROTECTION (SCALP) |
| MIL-T-22120 Base Document:1959 | TELESCOPE MARK 116 MOD 0 |
| MIL-O-24312 Revision B:1987 | OPERATIONAL STATIONS BOOK (OSB) |
| MIL-C-82622 Revision A:1975 | CABLE MISSILE CONTROL, TORPEDO TUBE, MK 8 MOD O AND MK 9 MOD O |
| MIL-C-1417 Revision F:1977 | COOK SET, FIELD, 5-MAN |
| MIL O 55310 : C | OSCILLATOR, CRYSTAL, GENERAL SPECIFICATION FOR |
| MIL-A-6348 Revision D:1956 | AMPLIFIER AM-203/ARA-19 |
| MIL-T-8887 Base Document:1987 | TUBING, STEEL, CORROSION RESISTANT, HEAT RESISTANT, STABILIZED, WELDED THIN WALL [ASG] |
| MIL R 83726 : B | RELAY, HYBRID, TIME DELAY (ON RELEASE), CLASS B, TYPE LIA, HERMETICALLY SEALED, DPDT, 10 AMPERES, ADJUSTABLE TIME DELAY (EXTERNAL RESISTOR)O.1 TO 500 SECONDS |
| MIL-G-15342 Revision E:1987 | GASKETS, METALLIC, SPIRAL WOUND FOR BOILERS |
| DD B 510 : 0 | BOTTLE, ASPIRATOR, 4-LITER CAPACITY |
| AASHTO M 281 : 1996 | SPECIFICATION FOR STEEL FENCE POSTS AND ASSEMBLIES, HOT-WROUGHT |
| MIL-PRF-32436 Base Document:2013 | MANUALS, TECHNICAL: PREPARATION OF HAND RECEIPT TECHNICAL MANUALS (HR) |
| MIL-DTL-43994 Revision D:2008 | MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE |
| SAE ARP 1835 : 2013 | PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES |
| MIL-B-81793 Revision D:1993 | BEARING, BALL, PRECISION, FOR INSTRUMENTS AND ROTATING COMPONENTS |
| MIL-F-82700 Base Document:1983 | Film, Polyester |
| MIL-L-65 Revision A:1968 | LEAD THIOCYANATE (SULPHOCYANATE) |
| MIL-C-81084 Revision A:1992 | CONTAINER, SHIPPING AND STORAGE MARK 300 MODS O AND 1 (FOR TORPEDO MK 46 MOD O) |
| MIL-B-44433 Base Document:1991 | BAG, BARRIER, MULTI-LAYER FILM |
| MIL-C-8514 Revision C:1967 | COATING, COMPOUND, METAL PRETREATMENT, RESIGN ACID [ASG] |
| MIL-D-3709 Base Document:1952 | DYE, GREEN (FOR COLORED SMOKE MIXTURES) REVIEWER: EA |
| MIL-F-18215 Base Document:1954 | FUSE, TIME, PLASTIC COATED |
| MIL-T-53066 Revision B:1994 | TANK, FABRIC, COLLAPSIBLE, 5000 BARREL, FUEL |
| MIL B 29597 : (1) | BAG, ODOR BARRIER, FLEXIBLE (FOR FOOD CONTAMINATED PLASTIC WASTE) |
| MIL-C-1472 Revision F:1978 | COMMISSARY OUTFITS, FIELD BREAKDOWN |
| MIL-S-7124 Revision B:1966 | SEALING COMPOUND, POLYSULFIDE, ACCELERATOR REQUIRED FOR AIRCRAFT STRUCTURES |
| MIL-A-37953 Base Document:1983 | ANESTHESIA APPARATUS, GAS, NITROUS OXIDE |
| GGG-M-125-9 Revision A:1982 | RESPIRATOR ASSEMBLIES, AIR LINE, HOOD AND HELMET (FOR ABRASIVE BLASTING OPERATIONS) |
| MIL P 24647 : B | PAINT SYSTEM, ANTICORROSIVE & ANTIFOULING, SHIP HULL |
| MIL-R-23139 Revision B:1965 | ROCKET MOTORS, SURFACE LAUNCHED, DEVELOPMENT AND QUALIFICATION REQUIREMENTS FOR |
| ASTM F 3308/F3308M : 2018 | Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications |
| MIL C 45468 : E | CAP, BLASTING, ELECTRIC, M6 PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| ASTM A 554 : 2016 : REDLINE | Standard Specification for Welded Stainless Steel Mechanical Tubing |
| MIL C 82168 : B | COAT, MAN'S: FULL DRESS, SUMMER AND WINTER, SCARLET, U.S. MARINE BAND, DRUM MAJOR |
| MIL P 43649 : B (1) | PARACHUTES, CARGO, 12-,26-, AND 34-FOOT DIAMETER |
| MIL P 197 : H | PACKAGING OF BEARINGS, ANTIFRICTION, ASSOCIATED PARTS AND SUBASSEMBLIES |
| MIL P 87107 : C | PROPELLANT, HIGH DENSITY SYNTHETIC HYDROCARBON TYPE, GRADE JP-9 AND JP-10 |
| MIL M 63005 : C | MANUAL, TECHNICAL FOR PREPARATION FOR SHIPMENT OF ARMY AIRCRAFT |
| MIL-A-55101 Revision A:1962 | ANTENNA AT-912()/VRC |
| MIL R 25988 : B | RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES |
| MIL L 7961 : C | LIGHT, INDICATOR, PRESS TO TEST |
| MIL-H-9896 Revision C:1988 | HARDWARE, UNIVERSAL LOAD CARRYING SLING |
| MIL-B-43611 Revision B:1990 | BAG, PAPER, WAXED (FIELD BREAD) |
| MIL V 9050 : E (1) | VALVE, OXYGEN, PRESSURE RELIEF, AIRCRAFT |
| BB-S-1419 Base Document:1970 | SULFUR HEXAFLUORIDE, TECHNICAL GRADE |
| ASTM A 805/A805M : 2009 : R2016 | Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled |
| MIL-PRF-18487 Revision A:1972 | Compound, Gun Slushing |
| MIL-D-37504 Base Document:1976 | DIBUCAINE OINTMENT, NF |
| MIL-H-50589 Base Document:1970 | H M X FOR 30MM AMMUNITION |
| MIL M 63042 : C | MANUAL, TECHNICAL, PROCEDURES FOR DESTRUCTION OF EQUIPMENT TO PREVENT ENEMY USE |
| MIL-R-60671 Base Document:1967 | RUBBER, CHLORINATED, NATURAL, POWDER |
| MIL-A-28772 Revision C:1984 | ANTENNA, HF, FIXED ROTATABLE LOG PERIODIC |
| MIL-S-38399 Revision A:1975 | STARTER, PNEUMATIC, AIRCRAFT ENGINE GENERAL SPECIFICATION FOR |
| MIL-P-82823 Base Document:1983 | PRIMER, ADHESIVE, CHLORINATED RUBBER BASE |
| MIL H 7061 : B | HOSE, RUBBER, AIRCRAFT, SELF SEALING, AROMATIC FUEL |
| MIL-S-52156 Revision D:1988 | SURVEYING INSTRUMENT, DISTANCE MEASURING, ELECTRONIC MICROWAVE |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| ASTM B 32 : 2008 : R2014 | Standard Specification for Solder Metal |
| MIL-B-26195 Revision C:1987 | BOXES, WOOD CLEATED, SKIDDED, LOAD BEARING BASE |
| MIL-S-24340 Revision A:1988 | SEALING COMPOUND, DECK, POLYURETHANE (POLYETHER BASE) |
| MIL E 24763 : A | ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE |
| MIL S 37388 : 0 | SODIUM ACETRIZOATE AND POVIDONE INJECTION |
| MIL-G-52483 Revision B:1980 | GENERATOR SETS GASOLINE ENGINE, TRAILER-MOUNTED 10 KW, 60 HERTZ, PU-619/M |
| MIL-T-37836 Base Document:1978 | TERBUTALINE SULFATE TABLETS |
| MIL-A-36695 Revision B:1974 | ACETOHEXAMIDE TABLETS, USP |
| MIL-S-17618 Revision H:1988 | SHIRT, MAN'S (POLYESTER/COTTON, TROPICAL, SHORT SLEEVE) |
| MIL-B-29604 Base Document:1994 | Body Armor, Hard, Small Arms Protective, PRU-61/P22P-15 |
| MIL-F-48235 Base Document:1973 | FIRING DEVICE, ANTI PERSONNEL MINE, ELECTRICAL M57E1 PARTS FOR, ASSEMBLING AND PACKING |
| MIL-S-46047 Revision E:1988 | STEEL, BARS AND BLANKS (1-3/4 INCHES AND OVER IN DIAMETER) FOR BARRELS OF SMALL ARMS WEAPONS |
| ASTM A 220/A220M : 1999 : R2004 | Standard Specification for Pearlitic Malleable Iron |
| MIL-T-53029 Revision C:1994 | TANKS, FABRIC, COLLAPSIBLE, 10,000 20,000 AND 50,000 GALLON, DRINKING WATER |
| MIL-P-37609 Base Document:1977 | PENTOBARBITAL SODIUM INJECTION, USP |
| MIL-S-37352 Revision A:1976 | SMALLPOX VACCINE USP |
| MIL C 43455 : J | COAT, COLD WEATHER, FIELD |
| MIL-B-13207 Revision D:1976 | BODY, VAN, VEHICLE-MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-C-38736 Revision B Base Document:1984 | CLEANING COMPOUND, SOLVENT MIXTURES (METRIC) |
| L-P-504 Revision E:1991 | PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| TT-P-1511 Revision B:1981 | PAINT, LATEX (GLOSS & SEMIGLOSS, TINTS & WHITE) (FOR INTERIOR USE) |
| ASTM F 2806 : 2010 : R2015 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| MIL-P-44311 Revision B:1993 | PORK SAUSAGE LINKS IN BRINE, THERMOSTABILIZED, TRAY PACK |
| NNN-M-560 Base Document:1962 | MORTAR AND PESTLE |
| GG-M-100 Revision A:1958 | MAGNIFIER (BINOCULAR) |
| MIL-B-44351 Base Document:1988 | BREAD PUDDING, IMITATION MAPLE FLAVORED, WITH SMOKED SAUSAGE, THERMOSTABILIZED, TRAY PACK |
| MIL-C-1476 Revision G:1988 | CREEPERS, ICE |
| MIL-T-10540 Revision D:1978 | TRACING TABLE, STEREOPLOTTER, PROJECTION, WITH CASE |
| MIL-T-38760 Base Document:1966 | TENSIOMETER DIAL INDICATING |
| MIL-Z-37707 Base Document:1978 | ZINC OXIDE OINTMENT, USP |
| MIL-D-10396 Revision D:1982 | DIMETHYL HYDROGEN PHOSPHITE, TECHNICAL |
| DD-F-776 Revision C:1960 | FUNNEL, FILTERING, LABORATORY, GLASS, BUCHNER TYPE |
| MIL-B-20588 Revision F:1985 | BUCKLE, CENTER BAR (MILITARY POLICE BELT) |
| MIL-H-43079 Revision F:1988 | Hood, Rocket Fuel Handler\'s: Impermeable, Limited Protection (No S/S Document) |
| MIL-L-81561 Revision G:1994 | LIFE PRESERVER ASSEMBLIES, INFLATABLE, AIRCREWMEN AND PASSENGER, CEMENTED AND HEAT SEALED |
| MIL-L-83491 Revision A:1978 | LIFE RAFTS, INFLATABLE, LRU-16/P AND LRU-17/P |
| GG P 00581 : D | POINTS, PULP CANAL, DENTAL, PAPER |
| MIL-C-14005 Revision A:1967 | CUPRIC CARBONATE, BASIC, ANALYZED REAGENT |
| MIL-S-43919 Revision C:1987 | SAUCE AND GRAVY MIXES, DRY, CANNED |
| GGG-T-20 Revision B:1964 | TACKER, STAPLE, (COMPRESSION TYPE, MANUALLY OPERATED), AND STAPLE, TACKER |
| L-P-1040 Revision B:1977 | PLASTIC SHEETS AND STRIPS (POLYVINYL FLUORIDE) |
| MIL-D-51453 Revision A:1986 | DISPERSER, RIOT CONTROL AGENT, PORTABLE, 3 GALLON, M33A1 |
| MIL-A-22337 Base Document:1964 | AMPLIFIER, RESOLVER ISOLATION |
| MIL-R-1832 Revision D:1989 | RUBBER BAND, PARACHUTE SUSPENSION LINE |
| FF-C-82 Revision B:1967 | CASTER, SWIVEL, CHAIR |
| NNN-F-001643 Base Document:1971 | FORCEPS MICROSCOPE COVER GLASS |
| MIL I 28791 : 0 | ISOLATOR, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| GGG-G-770 Revision B:1973 | GUN, AIR BLOW, (BLAST CLEANING) |
| MIL T 13584 : C NOTICE 1 | TREAD RUBBER, FOR RECAPPING PNEUMATIC TIRES, AND SOLID RUBBER TIRES FOR INDUSTRIAL AND TRACK LAYING VEHICLES, PACKAGING AND PACKING OF |
| MIL-L-10547 Revision E:1975 | LINERS, CASE, AND SHEET, OVERWRAP; WATER-VAPORPROOF OR WATERPROOF, FLEXIBLE |
| L F 00334 : E | FILM, PHOTOGRAPHIC, ROLL, MICROFILM (BLACK AND WHITE) |
| MIL-C-11418 Revision H:1992 | CLAMPS, LEAK REPAIR, PIPE COUPLING; FOR USE OVER GROOVED-TYPE COUPLINGS |
| MIL M 63004 : C | MANUALS, TECHNICAL: PREPARATION OF LUBRICATION ORDERS |
| MIL-B-43930 Revision B:1987 | BEANS, GREEN, DEHYDRATED, COMPRESSED |
| GG-H-00566 Revision B:1970 | HOLDER, DESK MEMORANDUM PAPER, ROLL TYPE |
| MIL-A-0083216 Revision C:1976 | AIR CONDITIONER, HORIZONTAL, 54,000 BTUH, 208/230 V |
| DDD-C-95 Base Document:1965 | CARPETS AND RUGS, WOOL, NYLON, ACRYLIC, MODACRYLIC |
| MIL C 52938 : 0 | COVER, AIR SUPPORTED, FOR 25,000 BARREL, EMBANKMENT SUPPORTED, FUEL RESERVOIR |
| MIL-S-17509 Base Document:1953 | STEEL CASTING, AUSTENITIC, CHROMIUM NICKEL, LOW MAGNETIC PERMEABILITY |
| MIL A 8897 : A | ACCUMULATORS, HYDRAULIC CYLINDRICAL, 3,000 PSI AIRCRAFT TYPE 11 SYSTEMS |
| MIL I 6856 : C | INDICATOR, PRESSURE SYNCHRO 1 1/2 INCH |
| MIL C 25369 : C | CYLINDER, CARBON DIOXIDE, FOR INFLATION OF PNEUMATIC LIFE PRESERVERS |
| MIL E 55119 : A | ELECTRO ACOUSTICAL TRANSDUCER EQUIPMENTS |
| AA-B-605 Revision A:1973 | BOX, FILING, STEEL |
| MIL-W-52624 Revision B:1989 | WATER PURIFICATION UNIT & WATER PURIFICATION EQUIPMENT SET, 600GPH PACKAGING OF |
| MIL-A-21059 Revision A:1959 | AEROLOGICAL DISPLAY EQUIPMENT |
| L-C-566 Revision C:1957 | COMB, HAIR (PLASTIC) |
| MIL-I-27247 Revision C:1985 | INDICATOR, TEMPERATURE, SYNCHRO |
| MIL D 22706 : F | DUCT AND SCUFF COVER, PNEUMATIC, FLEXIBLE |
| MIL-C-27487 Revision G:1992 | COUPLING HALVES, QUICK DISCONNECT, CAM LOCKING TYPE |
| MIL-S-64055 Base Document:1994 | SHOP EQUIPMENT, MECHANICAL MAINTENANCE, SHELTER MOUNTED, EXPANDABLE |
| MIL-M-36755 Revision B:1975 | METER, HYDROGEN ION TEST |
| MIL-S-12928 Revision H:1993 | SEPARATOR, OIL AND WATER, COMPRESSED AIR |
| MIL C 18388 : C | COIL, TUBE DEFLECTION, AND COILS, TUBE FOCUSING |
| MIL-B-23072 Base Document:1961 | BLOWER, ANTI-EXPOSURE SUIT VENTILATION, GENERAL SPECIFICATION FOR |
| MIL-A-52363 Revision C:1991 | AIR CLEANERS, INTAKE: DRY-TYPE (FOR INTERNAL-COMBUSTION ENGINE) |
| GG-M-1262 Revision A:1972 | MARKER, TUBE TYPE: WHITE |
| HH-I-00536 Revision A:1963 | INSULATION, ELECTRICAL, MICA, NATURAL MUSCOVITE |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| H-B-531 Revision C:1962 | BRUSH, SCRUB, DECK |
| MIL-M-55565 Revision C:1988 | MICROCIRCUITS, PACKAGING OF |
| KK-S-756 Revision D:1971 | STROP, MICROTOME KNIFE; AND STROP, RAZOR |
| L-P-517 Revision C:1967 | PLASTIC SHEET, SCRIBE COATED |
| GGG-P-00770 Revision A Interim Revision:1967 | PULLER, FUSE, (S-SHAPE) |
| TT-I-600 Revision C:1975 | INKING PAD, RUBBER STAMP |
| GG-B-00120 Revision B:1969 | BASEPLATE, DENTAL |
| MIL P 20664 : C NOTICE 3 | PLANIMETER, POLAR, COMPENSATING, WITH CASE |
| NNN-B-789 Base Document:1963 | BURET STRAIGHT PRECISION (SUPERSEDES IN PART FED SPEC DD-V-581A) |
| AASHTO M 275M/M 275 : 2008 : R2012 | SPECIFICATION FOR UNCOATED HIGH-STRENGTH STEEL BARS FOR PRESTRESSING CONCRETE |
| MIL-C-44116 Base Document:1983 | CARROTS, DEHYDRATED, COMPRESSED, DICED OR SHREDDED |
| MIL-D-81227 Revision B:1976 | DETECTOR KIT, WATER, AUTOMOTIVE, AVIATION FUEL |
| L-S-281 Revision C:1963 | SHIELD, ERASING, TYPIST |
| MIL-T-51289 Revision B:1985 | TEST SET, FLAME THROWER - RIOT CONTROL AGENT DISPENSER, HYDROSTATIC-VOLUMETRIC, 6000 PSI, M5 |
| MIL-A-36059 Base Document:1961 | APRON, X-RAY PROTECTIVE |
| MIL-A-27198 Revision B:1987 | ALTIMETER, PRESSURE AAU-7/A |
| MIL-C-14242 Revision B:1967 | CABLE ASSEMBLIES, FUZE CONTROL |
| MIL-B-15228 Revision G:1988 | BED, BUNK, STEEL, ROUND TUBE, SINGLE AND DOUBLE-DECK (CONVERTIBLE TYPE) |
| MIL-B-51254 Base Document:1966 | BREATHING APPARATUS, OXYGEN GENERATING, M20 |
| GGG-B-471 Revision B:1964 | BLADE, COPING SAW; AND BLADE, JEWELLERS' SAW |
| MIL F 14263 : A | FILTER, BAND PASS F-237()/GRC |
| MIL-T-36886 Revision A:1975 | TUBE, CENTRIFUGE, Polypropylene, Graduated, Disposable |
| LLL C 00110 : A | CASE, FILING, TRANSFER, WOOD OR FIBER |
| NNN C 1494 : A NOTICE 1 | CUP BLOOD SAMPLE |
| DDD-P-001024 Base Document:1965 | PAD, MEDICATED |
| MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL C 87937 : B | CLEANING COMPOUND, AEROSPACE EQUIPMENT |
| MIL-C-9075 Revision A:1968 | COMPUTER AND TRANSMITTER, TRUE AIRSPEED, PITOT STATIC, 150-900 KNOTS, TYPE MA 1 |
| MIL-D-82062 Revision C:1992 | DERRICK, BARGE MOUNTING, 100-LONG-TON CAPACITY |
| MIL G 44419 : 0 | GLOVES, MEN'S AND WOMEN'S, INTERMEDIATE COLD, WET |
| MIL-D-53025 Revision A:1985 | DETECTING SET, MINE, PORTABLE, METALLIC & NONMETALLIC AN/PRS-8 |
| MIL-L-37661 Base Document:1978 | LOOP, INNOCULATING LABORATORY, QUANTITATIVE 0.01 ML |
| MIL-S-24917 Base Document:1985 | SOCK, MENS, ACRYLIC NYLON, RIBBED, STRETCH TYPE |
| MIL-E-62484 Revision C:1990 | EARTHMOVER, ARMORED COMBAT, M9, PROCESSING FOR SHIPMENT AND STORAGE OF |
| MIL-A-11610 Revision B:1959 | ADAPTER, LINE, FILLING, 1-TON CONTAINER, M1 |
| MIL V 43511 : C | VISOR, FLYING HELMET, POLYCARBONATE |
| MIL-C-51098 Revision E:1981 | CYLINDER, NITROGEN-FILLED, PUNCTURABLE SEAL |
| GG-S-770 Revision B:1976 | STRIP, ABRASIVE, DENTAL |
| MIL-W-9049 Revision D:1990 | WEBBING, TEXTILE, NYLON, LOCKING LOOP |
| MIL-B-43064 Revision C:1981 | BINDER, LOOSE LEAF (EQUIPMENT LOGBOOK) |
| MIL-M-41837 Revision D:1988 | Maintenance Kit, Toxicological Agents Protective Clothing (No S/S Document) |
| GG T 00380 : A | |
| MIL-B-44256 Revision C:1990 | BLUEBERRY DESSERT, TRAY PACK |
| MIL-S-81732 Base Document:1969 | SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED |
| H-B-621 Revision F:1958 | BRUSH, STENCIL |
| MIL-F-46851 Revision C:1993 | FAN, GUIDED MISSILE, GROUND SUPPORT EQUIPMENT, GENERAL SPECIFICATION FOR |
| MIL L 51167 : A | LABORATORY, CHEMICAL, BASE, M2A1 |
| GG C 871 : C | CURVES, DRAFTING, REGULAR, AND IRREGULAR, CURVE SET, DRAFTING, REGULAR, AND IRREGULAR (GENERAL SPECIFICATION) |
| MIL-B-40042 Revision E:1988 | BOX, MATCH, WATERPROOF |
| MIL-B-44133 Base Document:1984 | BEEF, WITH NATURAL JUICES, CORNED, CHUNKED, FORMED, PRECOOKED, FROZEN |
| MIL-T-52943 Base Document:1978 | TANK, FABRIC, COLLAPSIBLE, PILLOW TYPE (FOR POTABLE WATER) |
| MIL-R-15041 Revision C:1960 | RELEASE, LIFESAVING EQUIPMENT, HYDRAULIC AND MANUAL |
| GGG-A-825 Revision A:1967 | AUGER MACHINE, PIPE AND SEWER, POWER OPERATED |
| MIL B 83054 : B | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| MIL T 52150 : E NOTICE 1 | TRESTLE ASSEMBLY, UNIVERSAL TRANSOM, 60 TON, FOR FLOATING AND FIXED BRIDGES |
| MIL-I-52172 Revision C:1983 | INSULATION BATT, NYLON THERMAL |
| MIL-C-37675 Base Document:1977 | CODEINE SULFATE TABLETS, NF |
| MIL P 18722 : 0 | PYROMETERS, PORTABLE, HANDHELD. |
| ASTM F 288 : 1996 | Standard Specification for Tungsten Wire for Electron Devices and Lamps |
| MIL-DTL-7905 Revision H:2003 | CYLINDERS, STEEL, COMPRESSED GAS, NON-SHATTERABLE, SEAMLESS, 1800 PSI AND 2100 PSI |
| MIL-S-60928 Revision A:1991 | SUPPORT, CHARGE, FOR 2.75 INCH ROCKET, MARK 40 AND MARK 4 |
| MIL-R-7885 Revision D:1988 | RIVET, BLIND, STRUCTURAL, MECHANICALLY LOCKED SPINDLE AND FRICTION LOCKED SPINDLE, GENERAL SPECIFICATION FOR |
| MIL C 81974 : 0 | COMPOSITION STARTER |
| MIL-B-46968 Base Document:1963 | BOMB, GAS, NONPERSISTENT, GB, 750-POUND, (WITHOUT FUZE AND BURSTER) MC-1, FILLING ASSEMBLY AND MARKING |
| MIL-R-13873 Base Document:1954 | REEL, WIRE, FIRING MODEL 1942 |
| MIL-R-11804 Revision E:1965 | RESISTOR, FIXED, FILM (POWER TYPE), GENERAL SPECIFICATION FOR |
| WW-T-791 Revision A:1971 | TUBE, BRASS, SEAMLESS |
| MIL-M-70691 Base Document:1988 | 4,4 - METHYLENEBIS (2,6-DITERTBUTYLPHENOL) |
| MIL-A-21618 Revision B:1975 | ADAPTER, PALLET, STEEL FOR CYLINDRICAL CONTAINERS |
| L-B-1283 Revision A:1977 | BAG, SOILED CLOTHES (WATER SOLUBLE PLASTIC) |
| FF-H-1819 Base Document:1974 | HARDWARE, BUILDERS, AUXILIARY LOCKS |
| MIL-C-22226 Revision A:1973 | COPPER NICKEL MANGANESE ALLOY BARS, PLATES, AND SHEETS, LOW MAGNETIC EFFECT (FOR SPECIAL PURPOSE TOOLS AND EQUIPMENT) |
| MIL-C-44001 Revision B:1990 | COVER, HELMET, CHEMICAL PROTECTIVE |
| MIL-I-23062 Base Document:1961 | IGNITER, MARK 247 MD O |
| FF-N-180 Revision A:1966 | NEEDLE, EXCEPT SURGICAL, HAND |
| MIL-T-13405 Revision E:1984 | TITANIUM, TECHNICAL, POWER |
| MIL-F-50990 Base Document:1973 | FUZE, BOMB: MECHANICAL NOSE, THERMALLY PROTECTED, M904E4, ASSEMBLY |
| MIL-P-18066 Revision C:1985 | PLYWOOD, SHIP AND BOAT CONSTRUCTION |
| MIL S 21919 : B NOTICE 1 | SWITCH, HYDROSTATIC, MARK 42 MOD O |
| GGG-F-325 Revision B:1966 | FILE, HAND (AMERICAN PATTERN) AND RASP, HAND |
| MIL-P-236 Revision J:1992 | PIPE, CULVERT, NESTABLE |
| MIL-P-38633 Revision C:1981 | PRIMER, STAB, FOR WDU-4/A WARHEAD. |
| MIL-C-24523 Base Document:1975 | CHRONOMETER, QUARTZ CRYSTAL, BATTERY POWERED, METRIC |
| MIL-D-11243 Revision A:1961 | DEXTROSE, MONOHYDRATE, TECHNICAL (D-GLUCOSE) |
| MIL-S-87021 Revision B:1985 | Shirt, Disposable (No S/S Document) |
| MIL-I-38391 Base Document:1965 | INDICATOR, ELECTRICAL TACHOMETER, ERU-12/A 0-350 RPM (ROTOR), 0-7000 RPM (ENGINE) |
| MIL A 83419 : C | ALTIMETER, SERVO CONTROLLED, AUTOMATIC PRESSURE STANDBY |
| MIL-G-85258 Base Document:1981 | GENERATOR, GAS PRESSURE, PROPELLANT ACTUATED BBU-18/B |
| SAE AS 7949 : 2004 | BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
| MIL-F-85571 Revision A:1986 | FUZE, BOMB, ELECTRONIC, FMU-139/B |
| MIL-E-45829 Revision A:1970 | ELECTRODE, WELDING, COPPER, SILICON-DEOXIDIZED, SOLID, BARE |
| MIL-S-18568 Revision B:1972 | SIGNAL, ROCKET, PISTOL, MK 1 MODS 0, 1, 2, 3, 4, AND MK 2 MODS 0 AND 1 |
| MIL I 11223 : B | IGNITER, FIRE BOMB, WP, M23 (W/O FUSE) LOADING ASSEMBLY |
| L-P-1035 Revision A:1974 | PLASTIC MOLDING MATERIAL, VINYL CHLORIDE POLYMER AND VINYL CHLORIDE VINYL ACETATE COPOLYMER, RIGID |
| MIL-L-60326 Base Document:1965 | LUBRICANT, FLUOROCARBON TELOMER DISPERSION (FOR USE WITH AMMUNITION) |
| UU-B-36 Revision J:1970 | BAGS, PAPER (GROCERS) |
| DOD B 82669 : 0 | BUTYL SEBACATE, DI-NORMAL |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| GGG-S-00825 Revision A Interim Revision:1971 | SWAGING TOOL, FLEXIBLE CABLE TERMINAL |
| GG-B-675 Revision E:1988 | BREATHING APPARATUS, SELF-CONTAINED |
| MIL I 82929 : A | INITIATOR, EXPLOSIVE ACTUATED, JAN-24/A |
| DOD D 51522 : 0 | DYE, DISPERSE RED 11 (METRIC) |
| MIL V 47306 : B | VALVE, STOP LIFT CHECK |
| MIL-A-82830 Base Document:1990 | AMMONIUM PERCHLORATE, CONDITIONED (WITH REDUCED ALKALI METAL CONTENT) |
| MIL H 22199 : E | HELMET, SAILOR S, REINFORCED PLASTIC, MK 3 MOD O |
| MIL-B-2213 Revision D:1992 | BRIDGE CONVERSION SET, FIXED BRIDGE: BAILEY; CONSTRUCTION OF ONE PANEL CRIB PIER, 31 FEET 7 INCHES HIGH, 145-TON |
| MIL-P-52897 Revision A:1982 | POWER PLANT, ELECTRIC, TRAILER MOUNTED, DIESEL ENGINE, 10 KW, 50/60 HERTZ, AN/MJQ-18 |
| MIL-C-11218 Revision E:1988 | CONVEYORS, ROLLER AND WHEEL, GRAVITY AND CONVEYER SUPPORTS |
| MIL-S-24240 Base Document:1966 | SCREW, COLLAR, 12-POINT, EXTERNAL WRENCHING GENERAL SPECIFICATION FOR |
| ASTM A 795/A795M : 2013 : REDLINE | Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use |
| MIL-R-14224 Base Document:1956 | RECTIFIER, METALLIC, SELENIUM (HIGH TEMPERATURE) |
| MIL-W-25913 Base Document:1957 | WAVEGUIDE, RIDGED ASSEMBLIES, FLEXIBLE AND RIGID, GENERAL SPECIFICATION FOR |
| MIL-C-14994 Base Document:1968 | CHARGE PROPELLING, 152MM, XM189 AND XM190, LOADING, ASSEMBLING AND PACKING |
| ASTM D 2282 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (SDR-PR) |
| MIL P 83206 : B | PITOT STATIC TUBE, L SHAPED, COMPENSATED, GENERAL SPECIFICATION FOR |
| AASHTO M 31M/M 31 : 2015 | STANDARD SPECIFICATION FOR DEFORMED AND PLAIN CARBON AND LOW-ALLOY STEEL BARS FOR CONCRETE REINFORCEMENT |
| MIL-F-43539 Revision A:1986 | FELT, BALLISTIC, NYLON |
| TT I 00547 : B | INK, NUMBERING MACHINE, FOR PHOTOGRAPHIC NEGATIVES |
| MIL-I-26860 Revision B:1972 | INDICATOR, HUMIDITY, PLUG, COLOR CHANGE |
| MIL-C-52988 Revision A:1987 | CHAMBER, DECOMPRESSION, DIVERS, 100 PSI |
| MIL-S-43960 Base Document:1977 | SWEAT PANTS, LEG ZIPPER |
| LLL-C-001491 Base Document:1969 | CASE, FILING, TRANSFER, KNOCKDOWN |
| MIL-I-24178 Base Document:1966 | INSULATION TAPE, ELECTRICAL, SEMI-CURED THERMOSETTING RESIN TREATED GLASS, ARMATURE BANDING, NAVAL SHIPBOARD |
| MIL-I-17205 Revision C:1961 | INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED |
| DOD-P-28682 Base Document:1987 | CONCRETE PLANT, MOBILE, SEMITRAILER MOUNTED, 6 CUBIC METERS BULK MATERIAL CAPACITY (METRIC) |
| MIL A 85097 : B | AIRCREW ESCAPE PROPULSION SYSTEMS (AEPS), PROCUREMENT SPECIFICATION FOR |
| MIL S 14487 : A NOTICE 1 | SIGHT, COMPUTING, M38, PACKAGING OF |
| GGG-E-926 Revision B:1963 | EXTRACTOR; COTTER-PIN |
| MIL C 12386 : E | CLAMP, REPAIR, PIPE: WITH GASOLINE-RESISTANT GASKET, GENERAL SPECIFICATION FOR |
| MIL-S-11716 Revision D:1993 | SUPERSTRUCTURE, STEEL, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL S 13789 : D | STRAINER, SEDIMENT, PIPELINE, BASKET TYPE |
| BB-O-925 Revision A:1961 | OXYGEN, TECHNICAL, GAS AND LIQUID |
| MIL V 87255 : 0 | VALVE, PRESSURE, ANTI-G SUIT, HIGH FLOW |
| PPP-S-1927 Revision A:1976 | SACK, SHIPPING, PAPER (REINFORCED) |
| PPP-B-650 Revision B:1975 | BOXES, CORRUGATED FIBERBOARD, SPECIAL PURPOSE (RECORDS RETIRING) |
| MIL P 3627 : D | PENETROMETER, SOIL, DIAL INDICATING [TWO CONES] AND SPRING INDICATING [AIRFIELD CONE] |
| MIL-T-8652 Revision A:1959 | TIEDOWN, CARGO, AIRCRAFT, 5,000 LB CAPACITY, TYPE MC 1 |
| MIL-P-40029 Revision B:1968 | PANEL MARKER, AERIAL LIAISON, COTTON DUCK, PANEL AL-125 |
| MIL-C-81986 Base Document:1974 | CORE MATERIAL, PLASTIC HONEYCOMB, NYLON PAPER BASE; FOR AIRCRAFT STRUCTURAL APPLICATIONS |
| JJJ B 0087 : NOTICE 1 | BALL, GAUZE |
| MIL A 3933 : E | ATTENUATORS, FIXED GENERAL SPECIFICATION FOR |
| HH-B-100 Revision B:1973 | BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) |
| MIL-R-24414 Revision D:1991 | Reels and Guides, Hose, Firefighting, Manually Operated |
| MIL A 11267 : C | ALUMINUM ALLOY SHEET, 8280 |
| QQ-B-655 Revision C:1987 | BRAZING ALLOYS, ALUMINUM AND MAGNESIUM, FILLER METAL |
| MIL-C-52093 Revision D:1991 | CRADLE, PONTOON BOAT, HALF SECTION, ALUMINUM HULL |
| MIL-S-63382 Base Document:1980 | SAFE AND ARMING (PARTIAL LOADING)ASSEMBLY FOR MINES, M718/M741 SYSTEM |
| MIL-C-21665 Revision B:1965 | CATALYST, CARBON MONOXIDE AND HYDROCARBON OXYDIZING (FOR USE IN AN AIR PURIFYING DEVICE ABOARD SUBMARINES) |
| MIL-T-425 Revision J:1994 | TUBE, STEEL: PIPELINE SECTION; WITH GROOVED NIPPLE WELDED ON EACH END |
| MIL-A-52818 Base Document:1974 | ANCHOR, GUY: SHIELD, EXPANSION |
| MIL-C-47200 Base Document:1974 | WIRE AND CABLE, ELECTRICAL, SINGLE CONDUCTOR, TWISTED PAIRS AND MULTICONDUCTOR SHIELDED AND JACKETED, HIGH TEMPERATURE |
| GGG S 0065 : B (1) | SAW, HAND |
| MIL-C-55462 Base Document:1966 | CABLE, TELEPHONE WD-36 ( )/TT DISPENSER, CABLE MX-6894( )/TT & DISPENSER, CABLE MX-6895( ) /TT |
| GGG-S-62 Revision D:1986 | SAW, CHAIN, PORTABLE, POWER |
| PPP B 1714 : NOTICE 1 | BAGS, SHIPPING, WOVEN POLYPROPYLENE |
| MIL C 29602 : 0 | CLEANING COMPOUNDS, FOR PARTS WASHERS AND SPRAY CABINETS |
| MIL M 37406 : A | MINERAL OIL LOTION, LANOLATED |
| MIL-D-37608 Base Document:1976 | DOXYLAMINE SUCCINATE AND PYRIDOXINE HYDROCHLORIDE TABLETS |
| MIL-D-37267 Revision A:1976 | DICYCLOMINE HYDROCHLORIDE TABLETS USP |
| MIL-C-37261 Base Document:1976 | CALCIUM CARBONATE TABLETS, NF |
| MIL-STD-1597 Revision A:1987 | QUALITY CONTROL OF LIQUID MISSILE PROPELLANTS AT CONTROL STORAGE POINTS |
| MIL-P-11859 Revision H:1991 | PONTON BOATS, ALUMINUM, FOR FLOATING FOOTBRIDGE |
| MIL-B-52088 Revision F:1992 | BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN |
| MIL-A-23899 Revision B:1984 | AURAL PROTECTOR, SOUND |
| O-T-634 Revision C:1984 | TRICHLOROETHYLENE, TECHNICAL |
| MIL-I-83262-2 Base Document:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE, EHU-38/A |
| MIL-R-83403 Base Document:1973 | ROCKET MOTOR SR110-AD-1 |
| MIL-C-51331 Base Document:1969 | COLLECTIVE PROTECTION EQUIPMENT, CBR, NIKE HERCULES, CONUS, M13 |
| MIL-V-23255 Revision B:1976 | VALVE, PRESSURE RELIEF |
| MIL-P-17689 Base Document:1953 | PROPELLANT, DOUBLE BASE SHEET, TYPE N-5 |
| MIL-C-43287 Revision H:1993 | CHILI CON CARNE WITH BEANS, COOKED, DEHYDRATED |
| MIL P 11720 : D NOTICE 1 | PROTRACTOR, RECTANGULAR (PLASTIC, 1 3/4 INCHES BY 6 INCHES) |
| RR-S-550 Revision E:2012 | Sockets, Wire Rope |
| DOD-B-24505 Revision C:1980 | BATTERY, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR DSRV) (METRIC) |
| MIL P 23110 : B | PENDULUM (FOR TORPEDO MARK 44 MODS 0 AND 1) |
| MIL-P-43134 Revision C:1993 | PLATE, TENSION, PARACHUTE PACKING |
| FF-C-77 Revision C:1986 | CASTERS, RIGID AND SWIVEL (INSTITUTIONAL DUTY) |
| MIL D 81544 : A | DISPENSER, PARACHUTE FLARE, SUU-44/A |
| MIL-A-58005 Revision B:1983 | ANCHOR, MARINE, MUSHROOM: CAST STEEL, 5,000 LB, NOMINAL WEIGHT |
| MIL-I-8404 Revision A:1953 | INDICATOR, PRESSURE, SINGLE 0 TO 35 PSI FUEL PRESSURE TYPE C 33 |
| MIL-DTL-32040 Base Document:1999 | Propellant, Gun, High Energy Nitramine |
| MIL-S-46997 Base Document:1963 | SQUIB, ELECTRIC, M3, MANUFACTURE AND ASSEMBLY |
| MIL-A-47280 Base Document:1974 | ADHESIVES, EPOXY |
| MIL I 7491 : B | INDICATOR RATE OF FLOW, FUEL TOTALIZING, SERVO STYLE, TYPE F 1 |
| MIL-W-26217 Revision B:1985 | Winch, Drum, Power Operated AF/E24H-1, Cargo Loading, 4,000 Pound Capacity, Variable Speed, 28V DC Portable |
| MIL-T-12839 Revision D:1981 | THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, BASE LINE TAPE, WITH CASE. |
| MIL-D-37738 Base Document:1978 | DISH, CULTURE, PETRI, TOP AND BOTTOM, COMPLETED STERILE, DISPOSABLE |
| MIL A 25676 : D | ADAPTOR, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT |
| MIL-B-37410 Base Document:1977 | BURNER, GAS, LABORATORY AND CARTRIDGE, ASSEMBLY |
| MIL-T-43932 Revision C:1980 | TROUSERS, UTILITY (DURABLE PRESS) |
| MIL-C-29111 Revision B:1980 | COVERALLS, EXPLOSIVE HANDLERS [WOMENS] |
| MIL-HDBK-774 Revision A:2004 | PALLETIZED UNIT LOADS |
| MIL-I-82577 Base Document:1973 | INDICATOR, DIGITAL (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| ASTM F 1183 : 1996 : R2011 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| MIL H 3679 : A | HEADSET, ELECTRICAL |
| MIL-H-37247 Base Document:1975 | HALOPROGIN SOLUTION |
| MIL-D-37874 Base Document:1978 | DEXAMETHASONE SODIUM PHOSPHATE OPHTHALMIC SOLUTION USP |
| MIL-A-37375 Revision A:1978 | ALUMINUM HYDROXIDE GEL, MAGNESIUM HYDROXIDE, AND SIMETHICONE SUSPENSION |
| MIL-C-36066 Revision B:1962 | CHLOROQUINE AND PRIMAQUINE PHOSPHATES TABLETS |
| MIL T 46755 : A | TIRES, PNEUMATIC AND TIRES, SEMI-PNEUMATIC, INSTALLED ON VEHICLES, PREPARATION FOR STORAGE AND SHIPMENT OF |
| L-P-50 Revision B:1966 | PAD, SCOURING |
| MIL-C-12056 Revision C:1981 | CALCIUM OXIDE, TECHNICAL (METRIC) |
| AA-F-00300 Base Document:1965 | FILE, ROLL DRAWING |
| MIL-P-83379 Revision A:1980 | PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID (30 POUNDS PER CUBIC FOOT DENSITY) |
| MIL-C-51407 Revision A:1983 | CHLORINATED LIME, TECHNICAL |
| GGG-D-647 Revision A:1965 | DRILL BLANKS AND DRILL BLANK SETS |
| MIL B 162 : D | BARIUM NITRATE |
| MIL-S-29354 Revision B:1986 | SWITCHBOARD, TELEPHONE SB 3614/TT AUTOMATIC |
| MIL-P-53045 Revision A:1985 | POWER PLANT, ELECTRIC DIESEL ENGINE, TRAILER MOUNTED, 10KW, 400HERTZ, AN/MJQ-25 |
| ASTM F 714 : 2013 : REDLINE | Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter |
| MIL C 82149 : B | COAT, MAN'S: FULL DRESS, SCARLET, U.S. MARINE BAND, MUSICIAN'S |
| MIL-A-27261 Revision A:1966 | Accelerometer, Aircraft |
| MIL-S-8784 Revision B:1971 | SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES |
| MIL-C-11743 Revision F:1989 | CASE, MAINTENANCE AND OPERATIONAL MANUALS |
| MIL R 45378 : B | RECOVERY VEHICLE, FULL TRACKED; MEDIUM, M88; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL M 37397 : NOTICE 1 | MEPIVACAINE HYDROCHLORIDE INJECTION USP |
| MIL-T-52735 Revision B:1991 | TRANSPORTER M812 CHASSIS, FOR RIBBON FLOATING BRIDGE |
| AA-S-704 Revision A:1971 | STOOL, STEP, CASTER MOUNTED, SAFETY |
| MIL M 63033 : A | MANUAL, TECHNICAL, REQUIREMENTS FOR DEMILITARIZATION OF SURPLUS MILITARY ITEMS |
| MIL P 43184 : 0 | PLATFORM COMPONENTS, AIR DELIVERY. MODULAR (DUAL RAIL SYSTEM), TYPE II |
| MIL S 13823 : C | STEEL, SHAPES, ROLLED OR FORGED, BARS, FLATS AND SPECIAL SECTIONS (FOR ARMOR) |
| MIL R 24918 : A | RAINCOAT, MAN'S, W/REMOVABLE LINER (CG) |
| MIL-STD-1473 Revision B:1990 | STANDARD GENERAL REQUIREMENTS FOR COLOR AND MARKING OF ARMY MATERIAL |
| MIL B 29595 : 0 | BATTERIES AND CELLS, LITHIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-A-81403 Base Document:1967 | ALTIMETER-ENCODER, AAU-21/A |
| MIL L 18618 : A | LEAD CARBONATE, BASIC, DRY (FOR ORDNANCE USE) |
| MIL-B-2481 Revision E:1973 | BULLS EYES, RIGGING, 5/16 INCH INSIDE DIAMETER |
| MIL N 49065 : E | NIGHT VISION GOGGLES AN/PVS-5A |
| MIL-R-37558 Base Document:1977 | RIFAMPIN CAPSULES USP |
| MIL-E-37431 Base Document:1976 | EPINEPHRYL BORATE OPHTHALMIC SOLUTION NF |
| MIL-E-37303 Revision B:1978 | EPINEPHRINE HYDROCHLORIDE OPHTHALMIC SOLUTION |
| MIL-A-37518 Base Document:1976 | ATROPINE SULFATE TABLETS, USP, HYPODERMIC |
| MIL-P-37785 Base Document:1978 | PREDNISOLONE SODIUM PHOSPHATE OPHTHALMIC SOLUTION, USP |
| MIL-F-70518 Base Document:1984 | FLARE, INFRARED TRACKING, MARK 33 MOD O (ARMY) PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-B-23306 Revision B:1985 | BINOCULAR, SHIP, 20-POWER AND ACCESSORIES |
| UU-P-561 Revision H:1972 | PAPER, TRACING |
| MIL-L-41800 Revision G:1985 | LINER, GROUND TROOP'S - PARACHUTIST'S HELMET |
| MIL-I-37416 Base Document:1976 | ISOXSUPRINE HYDROCHLORIDE TABLETS NF |
| MIL-D-37794 Base Document:1978 | DIPHENHYDRAMINE HYDROCHLORIDE ELIXIR, USP |
| ASTM B 234 : 2017 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Surface Condensers, Evaporators, and Heat Exchangers |
| SAE AS 1650 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, PROCUREMENT SPECIFICATION |
| MIL-E-82740 Base Document:1986 | EXPLOSIVE, PLASTIC-BONDED, INJECTION MOLDABLE (PBXN-301) |
| SAE AS 55151 : 2001 | PUMP, HYDRAULIC, RAM, HAND DRIVEN |
| SAE MA 2241 : 2015 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, SELF-BONDING, METRIC |
| SAE AMS P 46144 : 2015 | PLASTIC SHEET, POLYCARBONATE |
| ASTM C 875 : 1998 : R2008 | Standard Specification for Asbestos-Cement Conduit |
| SAE AS 81914 : 2016 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| SAE AIR 4728 : 2013 | REFERENCES, SPACECRAFT AND SPACECRAFT SERVICING, FLUID SYSTEM COMPONENTS (ABBREVIATIONS, ACRONYMS, DEFINITIONS, APPLICABLE DOCUMENTS AND ENVIRONMENTAL CONDITIONS) |
| AASHTO MP 30M/MP 30 : 2017 | SPECIFICATION FOR STEEL WIRE AND WELDED WIRE, PLAIN AND DEFORMED, FOR CONCRETE REINFORCEMENT |
| SAE MA 2100 : 2015 | HOSE ASSEMBLIES, METAL MEDIUM PRESSURE, HIGH TEMPERATURE, METRIC |
| SAE AMS R 83485 : 2014 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| SAE MA 1975 : 2015 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID REINFORCED, 135 DEGREE C, STANDARD DUTY, 28000/21000 KPA, HYDRAULIC, AIRCRAFT SYSTEMS |
| SAE AS 85720 : 2018 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR |
| AASHTO M 279 : 2014 | SPECIFICATION FOR METALLIC-COATED, STEEL WOVEN WIRE FENCE FABRIC |
| ASTM B 163 :2011 | Standard Specification for Seamless Nickel and Nickel Alloy (UNS N06845) Condenser and Heat-Exchanger Tubes |
| SAE AS 81819 : 2010 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
| ASTM A 48/A48M : 2003 | Standard Specification for Gray Iron Castings |
| SAE AS 81765 : 2017 | INSULATING COMPONENTS, MOLDED, ELECTRICAL, HEAT SHRINKABLE, GENERAL SPECIFICATION FOR |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| SAE ARP 1967 : 2014 | CONTAINERS, SHIPPING AND STORAGE, REUSABLE |
| ASTM A 854/A854M : 2008 | Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire |
| SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
| ASTM A 779/A779M : 2016 : REDLINE | Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete |
| SAE AMS P 22968 : 2016 | PAPER, RECORDING, HEAT SENSITIVE |
| ASTM F 2762 : 2011 | Standard Specification for 12 to 30 in. [300 to 750 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications |
| SAE AS 6054 : 2006 | DRUM, METAL-SHIPPING AND STORAGE |
| ASTM B 774 : 2000 : R2005 | Standard Specification for Low Melting Point Alloys |
| ASTM A 47M : 1990 | Standard Specification for Ferritic Malleable Iron Castings [Metric] |
| ASTM F 2307 : 2003 | Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011) |
| ASTM A 702 : 2013-11 | SPECIFICATION FOR STEEL FENCE POSTS, HOT WROUGHT |
| SAE AS 83819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
| ASTM F 438 : 2017 : REDLINE | Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 |
| ASTM A 740 : 1998 : R2003 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| SAE AMS I 7068 : 2011 | INGOT, ZINC ALLOY (FOR SHEET METAL FORMING DIES) |
| ASTM B 168 : 2011 | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, |
| SAE AS 5420 : 2017 | HOSE ASSEMBLY, HEATED, 125 PSIG, LINED SILICONE, POTABLE WATER, PROCUREMENT SPECIFICATION |
| SAE MA 2250 : 2015 | COUPLING FUEL, FLEXIBLE VARIABLE CAVITY, THREADED TYPE WITH FERRULES, METRIC |
| ASTM C 1448/C1448M : 2005 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| ASTM F 957 : 1991 : R1996 | Standard Specification for Gong, Sound Signaling |
| ASTM E 785 : 1981 : R2017 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM D 2513 : 2017-01 | SPECIFICATION FOR POLYETHYLENE (PE) GAS PRESSURE PIPE, TUBING, AND FITTINGS |
| ASTM A 818 : 2006 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM F 1483 : 2017 : REDLINE | Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe |
| ASTM C 221 : 1998 : R2008 | Standard Specification for Corrugated Asbestos-Cement Sheets |
| ASTM C 296 : 2000 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM C 659 : 1990 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels |
| ASTM C 508 : 2000 : EDT 1 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| ASTM F 1312 : 1990 : R2007 | Standard Specification for Brick, Insulating, High Temperature, Fire Clay |
| ASTM B 943 : 2016 : REDLINE | Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM F 1282 : 2017 : REDLINE | Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe |
| ASTM B 164 : 2003 | Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| ASTM B 907 : 2016 : REDLINE | Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders |
| ASTM F 2807 : 2013 | Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications |
| ASTM C 746 : 1990 : R1998 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| ASTM C 222 : 1997 : R2003 | Standard Specification for Asbestos-Cement Roofing Shingles |
| ASTM B 313M : 1988 | Specification for Aluminum and Aluminum-Alloy Round Welded Tubes (Metric) (Withdrawn 1990) |
| ASTM F 1901 : 2016 : REDLINE | Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems |
| ASTM B 774 : 2000 : R2005 : EDT 1 | Standard Specification for Low Melting Point Alloys |
| ASTM A 823 : 1999 : R2012 | Standard Specification for Statically Cast Permanent Mold Gray Iron Castings |
| ASTM C 875 : 1998 : R2003 | Standard Specification for Asbestos-Cement Conduit |
| ASTM A 834 : 1995 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM F 2905/F2905M : 2013 | Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications |
| ASTM F 1245 : 1989 : R2001 | Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard |
| ASTM F 667/F667M : 2016 : REDLINE | Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings |
| ASTM F 1504 : 2014 : REDLINE | Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation |
| ASTM A 47/A47M : 1999 : R2018 : EDT 1 | Standard Specification for Ferritic Malleable Iron Castings |
| ASTM F 1345 : 2010 : REV A | Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM B 865 : 2004 : R2015 | Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy<brk/> (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock |
| ASTM D 1527 : 1999 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| ISO 17367:2013 | Supply chain applications of RFID — Product tagging |
| ASTM A 856/A856M : 2003 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM F 1871 : 2011-06 | SPECIFICATION FOR FOLDED/FORMED POLY (VINYL CHLORIDE) PIPE TYPE A FOR EXISTING SEWER AND CONDUIT REHABILITATION |
| ASTM A 635/A635M : 2015 : REDLINE | Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for |
| AASHTO M 105 : 2009(R2018) | SPECIFICATION FOR GRAY IRON CASTINGS |
| MIL B 22020 : D | BAGS, TRANSPARENT, FLEXIBLE, SEALABLE, VOLATILE CORROSION INHIBITOR TREATED |
| ASTM A 159 : 1983 : R1993 | Standard Specification for Automotive Gray Iron Castings |
| O M 00232 : H | METHANOL (METHYL ALCOHOL) |
| MIL E 53126 : 0 | ELECTRICAL DISTRIBUTION EQUIPMENT |
| MIL-A-27582 Revision A:1963 | ADAPTER, TEST MX-6050/PSM-6 |
| L-P-377 Revision C:1994 | PLASTIC SHEET AND STRIP, POLYESTER |
| SAE AMS A 25463 : 2013 | ADHESIVE, FILM FORM, METALLIC STRUCTURAL SANDWICH CONSTRUCTION |
| MIL-G-12803 Revision C:1989 | GASKET MATERIAL, NON-METALLIC |
| MIL-C-22229 Revision A:1973 | COPPER BASE ALLOY CASTINGS (FOR PRESSURE TIGHT APPLICATIONS) |
| MIL-C-81268 Revision A:1988 | CLOTH NYLON |
| MIL-V-50065 Revision A:1964 | |
| MIL-T-55655 Revision A:1972 | TEST FACILITIES KIT MK-980 ( ) /PPS-5 |
| MIL-C-81302 Revision D:1985 | CLEANING COMPOUND, SOLVENT, TRICHLOROTRIFLUOROETHANE |
| KK-W-231 Revision D:1986 | WELTING, LEATHER, SHOE |
| MIL-A-46153 Revision C:1991 | ANTIFREEZE, ETHYLENE GLYCOL, INHIBITED, HEAVY DUTY, SINGLE PACKAGE |
| MIL H 44117 : A | HELMET, COMBAT VEHICLE CREWMAN, BALLISTIC SHELL, DH-132A |
| A-A-580 Revision A:1992 | LEAD HOLDER |
| MIL P 2845 : 0 | PACKAGING OF MAIN PROPULSION SHAFTING BEARINGS, BOAT AND SHIP PROPELLERS AND ASSOCIATED REPAIR PARTS |
| MIL-A-13092 Revision G:1990 | ADAPTER SET, ENGINE ELECTRICAL TEST |
| MIL-A-82785 Base Document:1986 | ADHESIVE, TWO PART, HIGH STRENGTH |
| MIL N 37645 : NOTICE 2 | NITROFURANTOIN ORAL SUSPENSION, USP |
| MIL-P-37693 Base Document:1978 | PHENYLBUTAZONE TABLETS, USP |
| MIL-DTL-3301 Revision D:2008 | COMPOUND, ASPHALTIC, HOT-MELT (CAVITY LINING) |
| MIL-C-43368 Revision F:1988 | COATS, MENS, TROPICAL AND SERGE, POLYESTER WOOL, ARMY GREEN, 344 |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| ASTM B 774 : 2000 : R2010 | Standard Specification for Low Melting Point Alloys |
| MIL-P-82866 Revision A:1994 | PRIMER, ELECTRIC, MARK 153 MOD 1 |
| MIL-C-81947 Revision A:1975 | COATING COMPOUND, THERMAL INSULATION, THREE-COMPONENT, INTUMESCENT |
| MIL-P-82691 Revision A:1989 | PROPELLANT GRAIN, IGNITER |
| MIL C 38240 : C | COMPUTER, ALTITUDE, ALTITUDE ENCODING CPU 66, GENERAL SPECIFICATION FOR AND MTU 39/A MOUNTING TRAY |
| MIL-R-81294 Revision D:1990 | REMOVER, PAINT, EPOXY, POLYSULPHIDE AND POLYURETHANE SYSTEMS |
| MIL-F-14052 Revision C:1970 | FIBER ROPE ASSEMBLY, SINGLE LEG |
| AA-B-606 Revision D:1993 | BOX, FILING, WOOD |
| MIL-B-81934 Revision B:1991 | BEARING, SLEEVE, PLAIN AND FLANGED, SELF LUBRICATING |
| MIL-C-37466 Base Document:1976 | COAL TAR SOLUTION, USP |
| MIL-A-49079 Revision A:1986 | ALTIMETER SET, ELECTRONIC AN/APN-209(V) (UNITS OF) |
| GGG-C-475 Revision B:1973 | CLIPPERS, HAIR, HAND |
| SAE AS 8568 : 2012 | BINOCULARS, PRISMATIC, HAND-HELD (FOR AERONAUTICAL USE) (7 X 50 AND 6 X 42 (WIDE FIELD)) |
| MIL S 37062 : B | SPECTROPHOTOMETER, PHOTOELECTRIC |
| MIL-N-6748 Revision A:1968 | NIPPLE, ELECTRICAL TERMINAL |
| AA-W-001791 Revision A:1973 | WARDROBE AND JANITOR'S CLOSET, WOOD, STEEL FRAME |
| MIL-C-37285 Revision A:1976 | CLOXACILLIN SODIUM FOR ORAL SOLUTION, USP |
| DOD P 63986 : 0 | PELLET, FLASH TUBE, 1B52 |
| MIL-N-47037 Base Document:1974 | NICKEL ALLOY, HIGH PERMEABILITY, SHIELDING GRADE |
| MIL-P-70819 Base Document:1991 | PRIMER, ELECTRIC, M128 LOADING, ASSEMBLING AND PACKING |
| MIL-V-36590 Revision A:1975 | VIEW BOX, RH BLOOD TYPING 115 VOLT, AC DC |
| UU B 25 : C NOTICE 1 | BAG, PAPER (INSULATED) |
| MIL-S-81256 Base Document:1965 | SILICA FABRIC, PHENOLIC IMPREGNATED |
| MIL W 18375 : B | WIRE ROPE, FLEXIBLE, CORROSION RESISTING, NONMAGNETIC, FOR AIRCRAFT CONTROL |
| MIL-B-44306 Revision B:1991 | BAG, STUFF, SLEEPING SYSTEM |
| MIL-S-22614 Base Document:1964 | SWITCH, SENSITIVE |
| GGG G 00690 : A | GROOVERS, EDGERS, AND CORNER TOOLS - CONCRETE, HAND |
| MIL-Z-399 Revision D:1971 | ZIRCONIUM (GRANULAR AND POWDERED) |
| LLL-B-650 Revision A:1965 | BOX, FILING, CLOTH COVERED WOOD OR FIBER |
| MIL L 44033 : A NOTICE 1 | LINES MULTI LOOP, CONCENTRIC |
| NN-H-0085 Base Document:1964 | HANDLE, FILE (ADJUSTABLE TYPE) |
| MIL-S-45179 Revision B:1978 | STITCHER, CEMENTING AND VULCANIZING, AND ROLLERS, HAND |
| MIL-C-51355 Revision A:1979 | CARTRIDGE, 40 MM, CS, M651 |
| MIL-T-8598 Revision B:1990 | TRANSMITTER, TEMPERATURE, ELECTRICAL RESISTANCE, FLUSH-MOUNTED, FREE AIR |
| MIL-I-25120 Revision C:1993 | INDICATOR, INSTRUMENT LANDING, AIRPORT RUNWAY |
| MIL-G-23083 Revision C:1972 | Gyroscope, Rate Switching MS 17399 |
| GGG-B-490 Revision F:1992 | BLOCKS, TACKLE (MANILA AND NYLON ROPE) |
| PPP-P-600 Revision G:1992 | PORCELAIN ENAMEL PRODUCTS AND HOUSEHOLD APPLIANCES, ELECTRICAL AND MECHANICAL REQUIREMENTS FOR PACKAGING OF |
| MIL-S-12651 Revision F:1983 | SPRAYER, PACKAGING OF |
| MIL-M-38761 Revision B:1977 | MICROFILMING & PHOTOGRAPHING OF ENGINEERING/TECHNICAL DATA RELATED DOCUMENTS, REQUIREMENTS FOR |
| A-A-55187 Base Document:1993 | BRAID, TEXTILE (FLAT) |
| MIL-B-38721 Revision B:1980 | BOXES, CONSOLIDATION, FIBERBOARD AND POLYOLEFIN |
| MIL C 47027 : 0 | COMPOUND, MOLDING, PLASTIC, RIGID, THERMOPLASTIC |
| MIL-C-85829 Base Document:1989 | COUPLING ASSEMBLY, HOSE, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-PRF-23199-1 Revision B:2010 | PACKAGING, PACKING AND MARKING (PP&M) REQUIREMENTS FOR INSTRUMENTATION AND CONTROL EQUIPMENT |
| P-S-411 Revision A:1955 | SKIN PROTECTIVE COMPOUNDS |
| MIL-M-37589 Base Document:1977 | MECLIZINE HYDROCHLORIDE TABLES USP |
| MIL-C-37284 Revision A:1978 | CHLORPHENIRAMINE MALEATE TABLETS, MODIFIED |
| MIL C 83383 : C | CIRCUIT BREAKER, REMOTE CONTROL THERMAL, TRIP FREE, GENERAL SPECIFICATION FOR |
| MIL-W-37540 Revision A:1977 | WATER FOR IRRIGATION, STERILE USP |
| MIL-F-37756 Base Document:1978 | FLURANDRENOLIDE CREAM, USP |
| MIL-I-37293 Revision A:1976 | ISOSORBIDE DINITRATE TABLETS, MODIFIED |
| MIL-S-37729 Revision A:1978 | SULFUR AND SALICYLIC ACID OINTMENT |
| U-P-560 Revision A:1976 | BACITRACIN ZINC, NEOMYCIN SULFATE AND POLYMYXIN B SULFATE OPHTHALMIC OINTMENT |
| AA-C-001770 Revision A Interim Revision:1978 | CABINET, WARDROBE AND STORAGE, CONTEMPORARY STYLE, STEEL, GENERAL OFFICE |
| MIL S 4510 : E | SPOTLIGHT, INCANDESCENT, ROOF MOUNTED, AUTOMOTIVE |
| MIL-F-37335 Revision A:1976 | FLUOCINONIDE CREAM, USP |
| MIL F 0037135 : A | FLURAZEPAM HYDROCHLORIDE CAPSULES, NF |
| MIL-P-53123 Base Document:1992 | POWER UNITS/POWER PLANTS, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-H-37435 Revision A:1976 | HAEMORRHOIDAL SUPPOSITORIES WITH HYDROCORTISONE ACETATE |
| MIL-Z-36818 Base Document:1972 | ZINC BACITRACIN, HYDROCORTISONE, NEOMYCIN SULFATE, AND POLYMYXIN B SULFATE OINTMENT |
| MIL-A-37378 Revision A:1977 | AMOXICILLIN CAPSULES |
| MIL-T-37634 Base Document:1978 | TRIAMCINOLONE ACETONIDE DENIAL PASTE, USP |
| MIL E 37322 : 0 | EPHEDRINE HYDROCHLORIDE, PHENOBARBITAL, POTASSIUM IODIDE, AND THEOPHYLLINE CALCIUM SALICYLATE SUSPENSION |
| MIL-T-37659 Base Document:1977 | TRIAMTERENE CAPSULES, USP |
| MIL-S-81340 Revision B:1979 | SIGNAL, UNDERWATER SOUND (SUS) MARK 84 AND MODS |
| MIL-A-37861 Base Document:1978 | ANTISEPTIC-ANESTHETIC SOLUTION, PHENOLATED |
| SAE AMS C 8073 : 2013 | CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED GLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS |
| MIL-A-21430 Revision B:1974 | ACCESSORY SET MARK 1 MOD 1 |
| MIL-A-37837 Base Document:1978 | ALUMINIUM OXIDE SCRUB CLEANSER |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-STD-648 Revision E:2016 | Specialized Shipping Containers |
| MIL-N-3944 Revision D:1981 | NONFERROUS PRODUCTS (OTHER THAN ALUMINUM, MAGNESIUM COPPER OR THEIR ALLOYS) PACKAGING AND PACKING OF |
| L-T-940 Revision B:1973 | TYPE CLEANER, PLASTIC RUBBER TYPE |
| MIL-L-20213 Revision E:1980 | LITHIUM HYDROXIDE (LiOH), TECHNICAL |
| MIL-H-11689 Revision C:1974 | HAMMER, PNEUMATIC, PORTABLE, NAIL-DRIVING |
| MIL-V-83271 Revision B:1992 | VEST, SURVIVAL, MESH NET, SRU-21/P |
| MIL-V-11671 Revision A:1951 | VIBRATOR PACK PP-68 ()/U |
| AA-D-001923 Base Document:1975 | DESK ATTACHMENTS, L, RETURN PLATFORM, CONTEMPORARY STYLE |
| GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
| MIL-A-22335 Base Document:1964 | AMPLIFIER, VARIABLE GAIN |
| MIL-T-44189 Revision C:1991 | TROUSERS, COLD WEATHER, CAMOUFLAGE |
| MIL P 43607 : G | PADLOCK, KEY OPERATED, HIGH SECURITY, SHROUDED SHACKLE |
| MIL-V-44362 Base Document:1989 | VEST, GRENADE, CARRIER (FOR 40 MM GRENADES) |
| GG T 00750 : A | TUBE, DUODENAL, SURGICAL, REHFUSS |
| MIL-A-25933 Revision B:1985 | ALTIMETER, PRESSURIZED COMPARTMENT, INTEGRALLY LIGHTED 0-50,000 FEET, 1-7/8 INCH DIAL |
| DOD K 24674 : 0 | KIT, DISSOLVED OXYGEN (METHOD C), NAVAL SHIPBOARD, (METRIC) |
| MIL-F-411 Revision D:1990 | FASTENER, BELT, CLIPS, END, STRAP WITH HOOK AND KEEPERS SLIDE |
| MIL-C-13959 Revision B:1976 | CAMERA SET, STILL PICTURE KS-7 |
| H B 00531 : D NOTICE 1 | BRUSH, SCRUB, DECK |
| MIL-B-43420 Revision A:1970 | BASKETS, WOVEN WIRE |
| MIL-A-10840 Revision D:1982 | ARSENIC TRIOXIDE, TECHNICAL |
| H B 00621 : G | BRUSH, STENCIL |
| MIL-P-1680 Revision D:1982 | POUCH, KNIFE, MEATCUTTERS, AND STEEL HOLDER [FOR BELT ATTACHMENT] |
| GG M 00112 : NOTICE 1 | MANOMETER OUTFITS, SPINAL-FLUID (WATER-TYPE) |
| MIL-B-37960 Base Document:1984 | BURS, SURGICAL, DIAMOND, GENERAL REQUIREMENTS FOR |
| MIL-T-49057 Revision A:1983 | TEST SET, IFF INTERROGATOR AN/TPM-25A |
| MIL-F-8615 Revision D:1976 | FUEL SYSTEM COMPONENTS, GENERAL SPECIFICATION FOR [ASG] |
| PPP-C-1337 Revision B:1976 | CONTAINERS, COMPOSITE (STEEL DRUM WITH POLYETHYLENE INSERT) |
| MIL-T-27-233 Base Document:1978 | TRANSFORMERS AND INDUCTORS (AUDIO POWER AND HIGH POWER PULSE) INDUCTOR CHARGING TF5S37ZZ |
| MIL W 12065 : D | WINCHES, DRUM, HAND OPERATED; SPUR GEAR, 2 OR 3 PURCHASE |
| MIL-D-28963 Revision A:1975 | |
| MIL P 52977 : 0 | PRIMER COATING, ALKYD, ANTICORROSIVE, LEAD AND CHROMATE FREE |
| MIL-B-70776 Base Document:1988 | BANDOLIER FOR MINE, ANTI PERSONNEL M86 |
| MIL-R-45906 Revision D:1984 | RELEASE, TWO POINTS - SINGLE PULL, PARACHUTIST'S EQUIPMENT PACK |
| MIL R 900 : F | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-G-20241 Revision D:1980 | GASKET MATERIAL, WOOL FELT, IMPREGNATED, ADHESIVE, PRESSURE-SENSITIVE |
| MIL-A-43146 Revision B:1985 | ACCESSORY SET, PARACHUTE, SCUBA ADAPTING |
| MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCT |
| MIL-B-52808 Revision A:1979 | BOXES, STORAGE, PHOTOMAPPING, PAPER ROLL |
| MIL-B-43750 Revision H:1993 | BEEF WITH RICE, COOKED, DEHYDRATED |
| MIL-T-46072 Revision A:1971 | TUBE, ROUND, COPPER ALLOY NUMBERS 330,331,332, AND 370 (LEADED BRASS) |
| MIL-I-742 Revision F:1980 | INSULATION BOARD, THERMAL, FIBROUS GLASS |
| MIL C 44077 : C | COVERALLS, COMBAT VEHICLE CREWMEN'S |
| MIL-A-52019 Revision C:1991 | ADAPTER ASSEMBLY, GLIDE ANGLE LIGHT TO STAKE OR CONE |
| MIL-T-11752 Revision B:1961 | TENSION HANDLE, STEEL MEASURING TAPE, SURVEY'S |
| MIL-B-37334 Revision A:1976 | BISACODYL TABLETS, USP |
| GG-P-455 Revision B:1967 | PLATES AND FOILS, PHOTOGRAPHIC (PHOTOSENSITIVE ANODIZED ALUMINUM) |
| MIL H 29181 : B | HASP, HIGH SECURITY,SHROUDED FOR HIGH AND MEDIUM SECURITY PADLOCK GENERAL SPECIFICATION FOR |
| MIL-S-47129 Revision A:1988 | SILICON DIOXIDE, MICROFINE |
| MIL C 87148 : 0 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-14 |
| MIL-B-43663 Revision C:1992 | BAGS, TOOL, SATCHEL |
| MIL-D-51188 Revision C:1977 | DISPERSER, RIOT CONTROL AGENT, HELICOPTER OR VEHICLE MOUNTED, M5 |
| MIL-I-25479 Revision A:1987 | INDICATOR, MACH NUMBER, SENSITIVE, SERVOED, RANGE .5 TO 1.O, TYPE ME-5 |
| MIL T 21038 : D | TRANSFORMERS, PULSE, LOW POWER, GENERAL SPECIFICATION FOR |
| GG C 001321 : B | CASTING MACHINE, DENTAL METALS, AND REPLACEMENT PARTS |
| MIL-A-8576 Revision C:1984 | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
| MIL-R-52676 Revision A:1975 | RECTIFIER SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED, PACKAGING OF |
| GGG-H-570 Revision A:1965 | HOLDER AND GUIDE, DRIVE PIN |
| MIL C 3643 : A | CONNECTOR, COAXIAL RADIO FREQUENCY, SERIES HN ASSOCIATED FITTINGS GENERAL SPECIFICATION FOR |
| MIL-I-545 Revision B:1976 | INSULATION SHEET, ELECTRICAL, PAPER, PRESSBOARD |
| MIL-B-20278 Revision B:1953 | BLADDERS, FLOTATION |
| MIL-A-17051 Revision A:1952 | AFTERBODY SHELLS, STEEL, WELDED |
| DOD-T-46151 Revision A:1979 | TAPE,ADHESIVE, RUBBER (METRIC) |
| DD-B-597 Revision A:1976 | BOTTLE, STOPPER, NARROW MOUTH, ROUND |
| MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
| DDD-P-53 Revision B:1957 | PAD, ABDOMINAL (DRAINAGE DRESSING COMBINES) |
| MIL-C-23024 Revision A:1967 | CARTRIDGE, DELAY, MARK 36 MOD 0 |
| GG-F-617 Base Document:1961 | |
| WW-P-471 Revision C:1981 | PIPE FITTINGS: BUSHINGS, LOCKNUTS, AND PLUGS; IRON, STEEL, AND ALUMINUM; (THREADED); 125 - 150 POUNDS |
| MIL-C-55412 Base Document:1965 | CENTER, MESSAGE AN/GSQ-80 |
| MIL-S-48403 Base Document:1973 | STEEL SHEET, HOT-DIP, ZINC-COATED (GALVANIZED), MINIMIZED SPANGEL, FOR AUTOMOTIVE VEHICLE BODY USE |
| MIL-C-29133 Revision A:1980 | COVERALLS, DISPOSABLE, GENERAL PURPOSE |
| GG-B-686 Revision B:1957 | BROACH, ROOT CANAL, DENTAL |
| MIL-F-11137 Revision C:1963 | FILTER, GAS, 150 CFM, M10 |
| MIL-M-43946 Revision A:1984 | MAINTENANCE KIT, WET WEATHER CLOTHING |
| MIL-F-62668 Base Document:1989 | FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT |
| MIL-O-18521 Base Document:1955 | OGIVE, PLASTIC, FOR FUSE MK 29 |
| MIL-B-1962 Revision C:1985 | BUCKLES, END, 1-INCH |
| MIL-L-81787 Revision B:1983 | Life Preserver, Inflatable, Utility, Type LPP-1A |
| MIL-S-43959 Revision A:1979 | SWEAT SHIRT, ZIPPER FRONT |
| GG P 001278 : A | PLASTIC-FILLING INSTRUMENTS AND CONTOURING INSTRUMENT, DENTAL |
| GG K 00508 : C | KNIFE, PLASTER, DENTAL |
| MIL-B-1860 Revision E:1977 | BUCKLE, SLIDE, PLASTIC |
| MIL-Y-1140 Revision H:1972 | Yarn, Cord, Sleeving, Cloth, and Tape-Glass |
| MIL-H-25754 Revision B:1976 | HOOD, WINTER, KNIT, WOOL |
| MIL-B-37811 Revision A:1978 | BURS, DENTURE TRIMMING, STRAIGHT HANDPIECE, TUNGSTEN CARBIDE |
| EE-B-002157 Base Document:1988 | BEEF SWISS STEAK, WITH GRAVY, THERMOSTABILIZED, TRAY PACK |
| DOD-B-24507 Revision B:1978 | BATTERY CELLS, STORAGE, SILVER-ZINC ALKALINE TYPE (FOR NR-1) (METRIC) |
| MIL-S-17726 Revision C:1980 | SAND SANDBLAST |
| MIL-O-44109 Revision B:1990 | OVERALL, COMBAT VEHICLE CREWMAN S |
| HHH-V-002140 Base Document:1988 | BEANS WITH PORK, THERMOSTABILIZED, TRAY PACK |
| MIL-S-29594 Base Document:1992 | Spectacles, Aviator\'s, Seven Wavelength Laser Eye Protective |
| MIL-T-82856 Base Document:1983 | TUNGSTEN, THORIATED, TWO PERCENT, FORGED |
| NASA KSC SPEC E 0012 : 1968 | HEAT AND BLAST PROTECTION COATING MATERIALS FOR ELECTRICAL CABLES, SPECIFICATION FOR |
| QQ-C-533 Revision B:1972 | COPPER BERYLLIUM ALLOY STRIP (COPPER ALLOY NUMBERS 170 AND 172) |
| MIL C 23806 : A | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, FOAM DIELECTRIC - GENERAL SPECIFICATION FOR |
| NNN T 780 : B NOTICE 1 | TUBE CENTRIFUGE GLASS |
| L-H-520 Revision G:1983 | HOSE AND HOSE ASSEMBLIES, NON-METALLIC (RUBBER, PLASTIC) |
| MIL-A-26360 Revision B:1982 | AMPLIFIER, ELECTRONIC CONTROL ASU-3/A |
| DDD-B-421 Revision F:1967 | BLANKET, BED (OTHER THAN ALL WOOL) |
| GGG-S-00625 Base Document:1964 | SPOON, BODY AND FENDER |
| MIL-A-27330 Revision B:1987 | ACCELEROMETER, ELECTRICAL, LINEAR TRU-3/A |
| MIL-C-82632 Revision A:1983 | CONNECTOR, KIT, SPLICE, SINGLE WIRE |
| MIL-L-741 Revision D:1984 | LEAD, ELECTRICAL, ARC WELDING |
| GG-C-00420 Base Document:1964 | CLAMP, RUBBER, TUBING, SHUTOFF |
| H-B-00481 Revision D:1970 | BRUSHES, SANITARY |
| MIL-P-47099 Revision A:1989 | POLYURETHANE FOAM, POLYETHER TYPE, RIGID, FOR PACKAGING AND ENCAPSULATION OF ELECTRONIC COMPONENTS |
| MIL-B-36341 Revision A:1975 | |
| MIL-R-22528 Base Document:1964 | RESISTOR, VARIABLE, PRECISION |
| MIL-B-10042 Revision D:1972 | BAG, AMMUNITION |
| MIL-D-37005 Revision A:1976 | DISK, FILTERING, MICROPOROUS, HYDROSOL TYPE, 47MM. DIAMETER, 100S |
| MIL-S-37490 Base Document:1976 | SPIRONOLACTONE AND HYDROCHLOROTHIAZIDE TABLETS |
| MIL-R-21252 Revision B:1987 | Rubber Sheet, Solid, Synthetic, Shipboard Water Evaporator Gasketing |
| ZZ R 710 : A | RUBBER GASKET MATERIAL, 35 DUROMETER HARDNESS |
| MIL-B-23459 Revision D:1988 | BUOY, HOSE SUPPORT, INFLATABLE |
| RR-S-615 Revision C:1969 | SPONGES, METAL |
| MIL T 49136 : 0 | TEST SET, COUNTERMEASURES SET AN/ALM-178(( |
| L-P-392 Revision A:1964 | PLASTIC MOLDING MATERIAL, ACETAL, INJECTION AND EXTRUSION |
| MIL-R-51305 Base Document:1969 | RADIOACTIVE TEST SAMPLE, KRYPTON 85, MX7338/PDR-27R |
| MIL-B-4173 Revision B:1969 | BENCH, WORK, GENERAL PURPOSE |
| MIL-C-47116 Revision A:1979 | COATING, EPOXY-AMINE |
| GG I 492 : A | INDICATOR, SIGHT LIQUID |
| MIL-S-21433 Revision A:1959 | SOCKETS, TURNBUCKLES, AND TURNBUCKLE ASSEMBLIES - WIRE ROPE, WEDGE AND THREADED LOCK SLEEVE |
| MIL-H-1404 Revision D:1970 | HOLDERS, CARD-LABEL |
| MIL O 37773 : 0 | OXAZEPAM CAPSULES, NF |
| AA-S-81 Revision B:1962 | SAFES, OFFICE, FIRE RESISTANT, BURGLARY PROTECTION |
| MIL-T-19314 Revision A:1956 | TRACER, MARK 20 MOD 0 |
| MIL T 55225 : 0 | TRANSMISSION MEASURING SET TS-559()/FT |
| GG-P-00636 Revision B:1973 | PRESS, DENTURE FLASK |
| MIL D 26392 : C | DUMMY CONVERTERS, LIQUID OXYGEN INDICATOR SYSTEM 10 LITER CRU-23/A AND 25 LITER CRU-24/A |
| MIL H 11588 : F | HOSE ASSEMBLY, RUBBER, SYNTHETIC, LIQUID PETROLEUM FUELS, DISPENSING, COLLAPSIBLE |
| MIL-E-46495 Revision A:1964 | Explosive Composition HTA-3 |
| MIL-F-50070 Revision C:1964 | |
| DDD-M-001349 Base Document:1967 | MAT, FLOOR AND MATTING, PILE SURFACE, ENTRANCE WAY TYPE |
| MIL-S-52302 Revision D:1992 | STRUT, BRACING, TRESTLE |
| MIL-T-26609 Revision C:1994 | Transmitter, Position |
| MIL-B-43395 Revision A:1981 | BELL, SANCTUS |
| GGG-G-00695 Revision A:1965 | GROOVER, SHEET METAL, HAND |
| MIL-I-43684 Revision B:1989 | INTRENCHING TOOL, HAND, FOLDING, LIGHTWEIGHT, AND CARRIER |
| MIL-B-36560 Revision A:1975 | BASSINET AND PRESSING TABLE COMBINATION, HOSPITAL |
| MIL-F-63228 Base Document:1979 | FUZE, PIBD, XM740, DIRECT IMPACT SENSOR FOR |
| GGG-S-131 Revision E:1965 | SCRIBER, MACHINISTS |
| MIL-W-12404 Revision E:1970 | WIND MEASURING SET AN/GMQ-11 (UNITS OF) |
| MIL-G-58103 Base Document:1979 | GRIP ASSEMBLY, CYCLIC CONTROLLER, HELICOPTER |
| MIL I 81530 : A | IGNITION ELEMENT, ELECTRIC MARK 11 MOD O |
| MIL V 9439 : D | VALVE, OXYGEN, CYLINDER, HIGH PRESSURE |
| MIL S 18313 : G | SLINGS, CARGO, NET, NYLON WEBBING |
| MIL-F-51206 Base Document:1970 | FILTER, COTTON |
| MIL-G-63343 Base Document:1980 | GRENADE XM74, HEMISPHERES FOR |
| MIL L 0016355 : D | LEAD STYPHNATE, BASIC |
| MIL R 398 : C | |
| GG-C-136 Revision B:1958 | CATHETERS, URETERAL, (X-RAY, GRADUATED) |
| MIL-C-1429 Revision C:1986 | CLEANER, BURNER SLOT FOR RANGE FIELD M 1937 |
| MIL-F-50054 Base Document:1959 | FILTER, GAS AND PARTICULATE 5,000 CFM M17 |
| MIL-P-82491 Base Document:1967 | POWER SUPPLY MARK 112 MOD 1 |
| MIL-C-10541 Revision D:1978 | COOLING UNIT, STEREOPLOTTER PROJECTION |
| MIL-M-85255 Base Document:1981 | MOTOR, HOT GAS (MAU-132A/B) |
| MIL-B-16041 Revision G:1993 | BUILDINGS, PREFABRICATED, READY-CUT, MAGAZINES, STEEL ARCH, 16- AND 25-FOOT SPAN (EXTENSIBLE) |
| MIL-B-85252 Base Document:1981 | BALLONET, CARTRIDGE ACTIVATED (MXU-695/B) |
| MIL-C-2070 Revision E:1985 | CHAIN ASSEMBLY, SINGLE LEG FOR CABINET,GASOLINE, FIELD RANGE OUTFIT |
| MIL-S-51016 Revision A:1963 | SODIUM PHOSPHATE, MONOBASIC, ANHYDROUS BIOLOGICAL GRADE |
| MIL-P-18703 Base Document:1953 | PRIMER, COMBINATION, MARK 13 MODS 0, 1 AND 2 |
| MIL S 3797 : 0 | STAND, MICROPHONE |
| MIL-R-51304 Base Document:1968 | RADIOACTIVE GAMMA TEST SAMPLE, CS 137, M9 |
| GGG-R-200 Revision B:0196 | REMOVAL TOOL, OIL FILTER |
| MIL C 17850 : A | COMPASS MAGNETIC, CARD, POCKET, TYPE MC-1 |
| GGG-C-414 Revision A:1965 | CLAMP, WIRE SPLICING |
| GG-L-260 Revision E:1988 | LEVEL, SURVEYING; ABNEY TYPE |
| MIL-A-13881 Revision C:1983 | ANTI-SEIZE COMPOUND, MICA-BASE (FOR THREADED FITTINGS) |
| MIL-C-38983 Revision A:1992 | CARTRIDGE, IMPULSE, CCU-11/B |
| MIL-A-23946 Base Document:1964 | AMMONIUM PERCHLORATE FOR SOLID PROPELLANT GRAINS |
| MIL-A-13196 Base Document:1954 | ATTENUATOR, VARIABLE, CN-7/URA-T1 |
| GG-S-605 Base Document:1960 | SPECULUM SET, EAR |
| MIL-I-7085 Revision C:1994 | INDICATOR, PRESSURE, ENGINE, 0-50 PSI |
| MIL-B-23297 Revision B:1980 | BOOSTER, GUIDED MISSILE, MARK 12 MOD 1 (LOADED ASSEMBLY) |
| MIL-I-45170 Base Document:1958 | INCREMENTS, PROPELLANT M5, T8 AND T9 |
| MIL-S-36390 Base Document:1965 | SHIELD, HEAT DISTILLING FLASK, COMPRESSED ASBESTOS AND CEMENT |
| MIL-I-27552 Revision C:1995 | INDICATOR, TEMPERATURE, THERMOCOUPLE EHU-15A/A, POTENTIOMETER TYPE, WHITE LIGHTED |
| MIL-W-6940 Revision D:1985 | WIRE STRAND, STEEL, NONFLEXIBLE (PREFORMED) |
| KK-P-91 Revision B:1963 | PALM, SEWING, (SAILMARKERS' AND SADLERS') |
| MIL-D-22962 Base Document:1961 | DIVING APPARATUS, SELF-CONTAINED DEMAND TYPE |
| MIL F 38642 : A | FIN ASSEMBLY, BOMB, MXU-469/B AND MXU-467/B |
| MIL-I-47199 Revision A:1980 | INSULATING COMPOUND, ELECTRICAL, LOW VISCOSITY, SILICONE RUBBER |
| MIL-T-45542 Revision D:1990 | TOOL SET, SHOP SETS AND KITS MAINTENANCE, MODIFICATION AND TOOL PACKAGING OF |
| MIL-C-11263 Revision B:1969 | CARRIER, FIELD PROTECTIVE MASK, M11 |
| MIL-P-44365 Base Document:1989 | PUDDING, CHOCOLATE, THERMOSTABILIZED, TRAY PACK |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL-G-46690 Revision E:1976 | GRENADE, HAND RIFLE, SMOKE, WP, M34 FILLING AND ASSEMBLY |
| MIL-R-51344 Revision B:1982 | ROCKET, INCENDIARY, 66 MM TPA 4 ROUND CLIP, M74 OR M74A1 |
| BB-H-1168 Revision D:2010 | HELIUM, TECHNICAL |
| MIL-T-8506 Revision A:1966 | TUBING, STEEL, CORROSION-RESISTANT (304) ANNEALED SEAMLESS AND WELDED |
| MIL-S-87238 Base Document:1985 | SURVIVAL AND FLOTATION SYSTEM, AIRBORNE |
| MIL-E-63511 Base Document:1982 | ELECTRONIC-MCD ASSEMBLY FOR MINE, ANTI-TANK: BLU 91/B |
| ASTM B 894 : 2017 : REDLINE | Standard Specification for ACuZinc5 |
| MIL-B-85685 Base Document:1988 | BOOSTER, FUZE, MARK 60 MOD 3 |
| MIL-G-82841 Base Document:1986 | |
| MIL-B-22356 Revision F:1985 | Bathythermograph Transmitting Set AN/SSQ-36 |
| MIL-L-52841 Revision A:1981 | LABORATORY, FIELD, TRAILER, CHASSIS MOUNTED, FOR DEVELOPING PIPELINE WELD RADIOGRAPHS |
| MIL-S-7470 Revision A:1975 | SHAFT, POWER TRANSMISSION, AIRCRAFT ACCESSORY, GENERAL SPECIFICATION FOR |
| MIL-A-21366 Revision A:1966 | ADHESIVE, FOR BONDING PLASTIC TABLE TOP MATERIAL TO ALUMINUM |
| MIL-T-81838 Base Document:1971 | Tank, Fuel, Aircraft, Auxiliary External 300 Gallon, Type AERO-1D |
| MIL-D-36238 Revision B:1974 | DIGOXIN ELIXIR, PAEDIATRIC .05 MG PER CC 60 CC (2 FL OZ) |
| MIL-W-48866 Revision A:1980 | WARHEAD SECTION, GM, PRACTICE LIGHTWEIGHT, M252 AND SHIPPING AND STORAGE CONTAINER, XM612, SPARE PARTS FOR |
| MIL-S-29398 Revision C:1984 | SLING SYSTEM, HELICOPTER EXTERNAL CARGO 40,000 POUND CAPACITY |
| MIL-T-50036 Revision B:1992 | TALC, TECHNICAL, T1 AND T3 |
| MIL-C-23931 Revision D:1985 | CARTRIDGE, IMPULSE, MARK 9 MOD O |
| MIL T 83174 : B (3) | TRANSMITTER, ACCELEROMETER, AXIAL |
| MIL-F-81334 Revision B:1977 | FOAM, PLASTIC, FLEXIBLE, OPEN CELL, POLYESTER TYPE POLYURETHANE |
| MIL-R-46198 Base Document:1988 | RESIN, POLYIMIDE, HOT PRESSED OR PRESSED AND SINTERED |
| MIL-C-64030 Base Document:1986 | CONTROL INDICATOR FOR DISPENSER AND MINES GROUND M131 |
| MIL-B-21408 Revision G:1984 | BOOTS, SAFETY |
| MIL C 29405 : A | CLOTH, BROADCLOTH, WOOL AND WOOL/NYLON |
| MIL K 23714 : C | KIT, SAMPLING, FOR AVIATION FUELS, REUSABLE |
| RR-S-001301 Base Document:1967 | SAFETY EQUIPMENT, CLIMBING |
| MIL-T-43702 Revision A:1975 | TIE, RIBBON, TWIST |
| MIL-I-25482 Revision D:1993 | INDICATOR, ENGINE TESTING |
| MIL-C-23952 Revision C:1992 | CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM |
| PPP-B-140 Revision C:1993 | BATTERY, STORAGE, INDUSTRIAL, PACKAGING OF |
| MIL-C-43570 Revision A:1985 | COVERALL, SAFETY, INDUSTRIAL |
| MIL-T-85472 Revision A:1987 | TEST SET, GROUP OQ-169A/DSM-96A |
| O-P-566 Revision B:1984 | POTASSIUM HYDROXIDE, TECHNICAL |
| MIL-C-31003 Base Document:1992 | COVERALLS, UTILITY |
| L-F-333 Revision A:1974 | FILM, PHOTOGRAPHIC, MOTION PICTURE (BLACK AND WHITE) |
| MIL-P-51315 Revision A:1983 | POTASSIUM BIFLUORIDE, TECHNICAL |
| PPP-F-00320 Revision E:1991 | FIBERBOARD: CORRUGATED AND SOLID, SHEET STOCK (CONTAINER GRADE) AND CUT SHAPES |
| MIL-T-22238 Revision H:1987 | TANK, LIQUID STORAGE, METAL FOR PETROLEUM PRODUCTS, HORIZONTAL W/SKIDS, 6OO GALLON CAPACITY |
| DOD-A-10825 Revision A:1979 | ALUMINUM OXIDE, ANHYDROUS, ANALYZED REAGENT (METRIC) |
| MIL-C-10928 Revision F:1986 | CANDY AND CHOCOLATE CONFECTIONS |
| PPP-G-460 Revision C:1976 | GLASS CONTAINERS, FILLED AND CLOSED, PACKAGING, AND PACKING OF |
| MIL-P-37567 Base Document:1977 | PRIMIDONE TABLETS, USP |
| DOD-C-24676 Base Document:1987 | COPPER-NICKEL ALLOY BAR, ROD AND FORGED SHAPES, HIGH STRENGTH (METRIC) |
| MIL-F-10915 Revision L:1972 | FUZE, HAND GRENADE, RIOT, POCKET, CS,M201A1E1, FUZE, FLOATING SMOKE POT, M207A1, AND FUZE, INCENDIARY, M210 |
| MIL-P-51300 Base Document:1952 | PHOSPHOROUS TRICHLORIDE, ANALYZED REAGENT |
| MIL-B-40006 Revision D:1992 | BUCKLE, GENERAL OFFICERS BELT, GOLD PLATED |
| MIL-P-13981 Revision A:1971 | PHOSPHOROUS ACID, ANALYZED REAGENT |
| MIL-Z-51317 Base Document:1969 | ZINC CARBONATE, ANALYZED REAGENT |
| MIL-C-24937 Revision A:1993 | CAP, COMBINATION, MAN'S (CG) |
| MIL-C-13246 Revision B:1973 | CRESYLIC ACID, TECHNICAL |
| SS S 535 : B | SODIUM BORATE, DECAHYDRATE, TECHNICAL (BORAX) |
| MIL-C-37660 Base Document:1976 | COCAINE HYDROCHLORIDE USP STERILE |
| MIL-STD-1647 Revision E:2003 | IDENTIFICATION MARKINGS FOR DOMESTICALLY MANUFACTURED BEARINGS, BALL, ANNULAR FOR INSTRUMENTS AND PRECISION COMPONENTS |
| MIL-C-37235 Base Document:1975 | CROMOLYN SODIUM CAPSULES |
| MIL-H-37298 Revision A:1976 | HYDROCORTISONE ENEMA USP |
| MIL-I-37443 Base Document:1976 | ISOPROPYL ALCOHOL NF |
| MIL-P-4861 Revision C:1991 | PACKING, PREFORMED, RUBBER PACKAGING OF |
| MIL-S-37465 Base Document:1976 | SILVER NITRATE APPLICATORS |
| MIL-M-37450 Base Document:1976 | MINERAL, OIL, USP |
| MIL-G-82058 Revision D:1984 | GENERATOR SET, DIESEL, 750 KW, 50/60 HERTZ, PRIME, UTILITY |
| MIL-F-37274 Revision A:1976 | FLUOROMETHOLONE OPHTHALMIC SUSPENSION |
| MIL-S-37296 Revision A:1975 | SODIUM SALICYLATE TABLETS NF |
| MIL-S-37695 Base Document:1978 | |
| MIL-T-37534 Base Document:1977 | TRIMETHOBENZAMIDE HYDROCHLORIDE AND BENZOCAINE SUPPOSITORIES |
| MIL-B-85099 Base Document:1978 | BATTERY, WET PRIMARY FOR AN/DKT-37(V) TELEMETRY PACKAGE |
| MIL-S-37398 Base Document:1976 | SULFISOXAZOLE TABLETS, USP |
| MIL-A-37610 Base Document:1978 | ASPIRIN, ALUMINUM HYDROXIDE GEL, DRIED, AND MAGNESIUM HYDROXIDE TABLETS |
| MIL-C-37488 Base Document:1976 | CHLORTHALIDONE TABLETS USP |
| MIL-A-37626 Base Document:1978 | ASPIRIN, CAFFEINE AND PHENACETIN TABLETS |
| MIL-M-37461 Base Document:1976 | MEPERIDINE HYDROCHLORIDE TABLETS USP |
| MIL-M-37662 Base Document:1977 | MILK OF MAGNESIA, USP |
| MIL S 8932 : A | SWITCH, PRESSURE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-F-37754 Base Document:1978 | FERROUS SULFATE TABLETS, USP |
| MIL-Q-37280 Base Document:1975 | QUINIDINE GLUCONATE TABLETS |
| MIL-A-37521 Revision A:1977 | ACETAMINOPHEN TABLETS, USP |
| MIL-E-36700 Revision A:1976 | ETHOHEPTAZINE CITRATE AND ASPIRIN TABLETS |
| MIL-S-37716 Base Document:1977 | SODIUM CHLORIDE TABLETS, USP |
| MIL-I-37632 Base Document:1977 | ISONIAZID TABLETS, USP |
| MIL-A-37494 Revision A:1977 | ASPIRIN TABLETS, USP |
| MIL-T-37689 Base Document:1978 | TETRACYCLINE HYDROCHLORIDE CAPSULES, USP |
| MIL-A-37814 Revision A:1978 | ASPIRIN, ALUMINUM HYDROXIDE GEL, DRIED, AND MAGNESIUM HYDROXIDE TABLETS |
| MIL-M-37765 Base Document:1978 | MAGNESIA AND ALUMINA ORAL SUSPENSION, USP |
| MIL-R-37342 Base Document:1976 | RESORCINOL MONOACETATE AND COLLOIDAL SULFUR LOTION |
| MIL-F-37700 Base Document:1978 | FLAVOXATE HYDROCHLORIDE TABLETS |
| MIL-A-36897 Revision B:1976 | ACETONE TEST TABLETS |
| MIL-PRF-25690 Revision B:1993 | PLASTIC, SHEET AND FORMED PARTS, MODIFIED ACRYLIC BASE, MONOLITHIC, CRACK PROPAGATION RESISTANT |
| MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| MIL-I-7171 Revision D:1993 | INSULATION BLANKET, THERMAL ACOUSTICAL |
| MIL-S-12511 Revision G:1983 | SPRAYER, INSECTICIDE, FRAME MOUNTED, GASOLINE ENGINE DRIVEN, MIST AND SOLID STREAM, 180 GPH |
| MIL-S-44290 Base Document:1987 | SMOCK, MAN'S: HOSPITAL DUTY UNIFORM (HDU) |
| MIL-G-49140 Base Document:1977 | GENERATOR, DIRECT CURRENT G67((/G |
| MIL-A-52832 Revision A:1976 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: AN/GSQ-159 (DSID) |
| MIL-H-58108 Base Document:1986 | HEADSET-MICROPHONE KIT MK-2193/AIC |
| MIL-A-85505 Base Document:1983 | ALTIMETER, STANDBY, TYPES 1 AND 2 |
| MIL-E-10853 Revision C:1981 | ETHYLCELLULOSE, TECHNICAL (METRIC) |
| MIL-S-10520 Revision D:1975 | STEEL, FORGING, FOR PROJECTILE STOCK |
| MIL-I-7112 Revision B:1985 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, CYLINDER HEAD 0 DEGREES C TO 300 DEGREES C |
| MIL-R-9300 Revision B:1968 | RESIN, EPOXY, LOW-PRESSURE LAMINATING |
| MIL-B-8943 Revision A:1966 | BEARINGS, JOURNAL - PLAIN AND FLANGED, TFE-LINED |
| MIL-J-7448 Revision K:1979 | JACKET, FLYERS, MAN LIGHT ZONE L 28 |
| MIL-B-43404 Revision F:1993 | BEEF STEW, COOKED, DEHYDRATED |
| MIL-C-52707 Revision D:1983 | COVER, FOXHOLE OVERHEAD PROTECTION |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| GG-D-00441 Revision C:1969 | DISPENSER, STRIP, DENTAL |
| TT-I-528 Revision C:1971 | INK, DRAWING, WATERPROOF, BLACK |
| MIL-F-50086 Revision A:1960 | FILTER UNIT, GAS-PARTICULATE, TANK, THREE-MAN, 12-CFM, M8A2 |
| MIL-C-40643 Revision B:1976 | CLIP, FASTENER, CONTAINER |
| MIL-A-22339 Base Document:1964 | AMPLIFIERS, COMPUTATION |
| HH-P-151 Revision F:1985 | PACKING; RUBBER-SHEET, CLOTH-INSERT |
| MIL C 87149 : 1986 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-15 |
| MIL-H-502 Revision B:1982 | HEXAMETHYLENETETRAMINE, TECHNICAL |
| MIL-F-18698 Base Document:1955 | FUSE, DETONATING, MK 27 MOD 0 AND MOD 1 (40 MM) |
| MIL H 55535 : 0 | HEADSET MICROPHONE KIT MK-1039/G |
| MIL-C-85078 Base Document:1978 | COVERALLS, FLYERS, KNIT HIGH TEMPERATURE RESISTANT ARAMID CWU-48/P |
| MIL-H-21660 Revision A:1992 | HOOK, THRUST, JATO - 1000 POUNDS NOMINAL THRUST |
| MIL-T-55570 Base Document:1967 | TEST SET, ELECTRONIC CIRCUIT PLUG IN UNIT AN/ARM-87 ( ) (UNIT OF) |
| MIL-I-6903 Revision C:1968 | INK, MARKING [FOR PARACHUTES AND OTHER TEXTILE ITEMS] |
| DDD-C-441 Revision C:1972 | CLOTH, POLISHING |
| MIL-I-11525 Revision G:1968 | IGNITION CYLINDER, FLAME THROWER, PORTABLE, M1 |
| JJJ-V-002169 Revision A:1985 | POTATOES, DICED IN BUTTER SAUCE, THERMOSTABILIZED, TRAY PACK |
| NNN-P-001482 Revision B:1972 | PIPET SEROLOGICAL SAHLI DILUTING HAEMOGLOBINOMETER 0.02 MI |
| UU-S-48 Revision F:1973 | SACK, SHIPPING, PAPER |
| MIL-C-44216 Revision A:1989 | CANTEEN, WATER, COLLAPSIBLE, 5 QUART CAPACITY |
| MIL C 17361 : F | CIRCUIT BREAKERS, AIR, ELECTRIC, INSULATED HOUSING (SHIPBOARD USE) |
| MIL-B-43444 Revision A:1975 | BAG, PLASTIC, CONTAMINATED WASTE DISPOSAL |
| MIL-P-55010 Revision A:1965 | PLASTIC SHEET, POLYETHYLENE TEREPHTHALATE |
| MIL-R-37198 Base Document:1975 | READER, MICROHEMATOCRIT, SPIRAL TYPE |
| MIL-S-28600 Revision A:1976 | SORBENTS, FLOATING (FOR OIL SPILL REMOVAL) |
| MIL-DTL-55235 Revision A:2003 | CONNECTORS, COAXIAL, RADIO FREQUENCY, SERIES TPS, GENERAL SPECIFICATION |
| MIL-E-83304 Revision B:1975 | EXTINGUISHER UNIT, FIRE BROMOCHLORODIFLUOROMETHANE, FEU-2/S32P, 40 GALLON CAPACITY, TRUCK MOUNTING |
| MIL-I-27672 Revision B:1987 | INDICATOR, POSITION ALU-4/1, HORIZONTAL STABILIZER |
| KKK-S-2777 Base Document:1985 | SNOWPLOWS, TRUCK MOUNTED, DISPLACEMENT TYPE, 36,000 GVWR, 4 BY 4 |
| MIL-O-24905 Revision B:1990 | OVERCOAT, MAN'S, REEFER (COAST GUARD) |
| MIL-B-13157 Revision C:1980 | BRIDGE, FIXED: PANEL, SINGLE LANE, ALUMINUM |
| MIL-A-52318 Revision A:1971 | ANCHOR ASSEMBLY, HAND WINCH: FOR MEDIUM CABLEWAY |
| MIL-M-29417 Base Document:1984 | MODULE, FUEL PUMP [SIXCON] |
| MIL-A-27670 Revision D:1994 | AMPLIFIER-INDICATOR GROUP, INDICATED AIRSPEED A/A24G-10 |
| MIL F 46048 : A | FLOOR PLATE, RAISED PATTERN, MAGNESIUM ALLOY, (AZ31B) ROLLED |
| MIL S 23586 : E | SEALING COMPOUND, ELECTRICAL, SILICONE RUBBER, ACCELERATOR REQUIRED |
| MIL-B-43166 Revision B:1975 | BAG, COTTON DUCK, NAIL |
| MIL-B-1977 Revision C:1970 | BAG, VALUABLES, NUMBERED, WITH TAG, METAL IDENTIFICATION |
| O-A-549 Revision A:1973 | ANTI FOGGING COMPOUND |
| MIL-A-83212 Revision A:1976 | ALTIMETER, PRESSURE AAU-27/A |
| MIL-S-0053046 Revision A:1994 | SURVEYING EQUIPMENT, ELECTRONIC DISTANCE MEASURING, MEDIUM RANGE, (SEDME MR) |
| MIL-A-85672 Base Document:1987 | AMPLIFIER, RADIO FREQUENCY AM-7177A/ARC |
| MIL-G-26988 Revision C:1971 | GAGE, LIQUID QUANTITY, CAPACITOR TYPE TRANSISTORIZED, GENERAL SPECIFICATION FOR |
| MIL-DTL-18186 Revision E:2017 | CROWNS, SERVICE AND DRESS CAP |
| MIL-C-14518 Revision E:1992 | CONNECTOR, BRIDLE LINE: SHEAVE TYPE |
| ASTM F 2623 : 2015-01 | SPECIFICATION FOR POLYETHYLENE OF RAISED TEMPERATURE (PE-RT) SDR 9 TUBING |
| MIL-S-23008 Revision D:1988 | STEEL CASTINGS, ALLOY, HIGH YIELD STRENGTH ((HY-80 AND HY-100) |
| AA-S-696 Base Document:1976 | STOOL, REVOLVING, SURGEON'S |
| MIL-D-37656 Base Document:1977 | DOXORUBICIN HYDROCHLORIDE FOR INJECTION |
| MIL-C-82890 Base Document:1993 | CARTRIDGE, FIRE EXTINGUISHER CCU-120/A |
| MIL-H-85037 Base Document:1976 | HOOD, WINTER, FLYER'S |
| GGG-T-70 Revision C Interim Revision:1968 | TAP, THREAD CUTTING (HIGH SPEED STEEL, GROUND THREAD HAND AND SPARK PLUG) |
| MIL F 10943 : B | FATTY ACIDS |
| A-A-2763 Base Document:1992 | TYPING, ELEMENT (DISK TYPE) |
| MIL-I-22110 Revision C:1985 | INHIBITORS, CORROSION, VOLATILE, CRYSTALLINE POWDER |
| MIL-D-218 Revision B:1981 | DIBUTYL PHTHALATE, TECHNICAL (METRIC) |
| MIL-R-81903 Revision A:1977 | REMOVER, ACID ACTIVATED, FOR AMINE CURED EPOXY COATING SYSTEMS |
| ASTM A 706/A706M : 2016 : REDLINE | Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement |
| MIL P 008184 : D | PLASTIC SHEET, ACRYLIC, MODIFIED |
| QQ-S-766 Revision D:1988 | STEEL PLATES, SHEETS AND STRIP CORROSION RESISTING |
| MIL-B-82789 Base Document:1990 | BROADGOODS, SILICA CLOTH, PHENOLIC IMPREGNATED |
| MMM-A-1754 Base Document:1973 | ADHESIVE AND SEALING COMPOUND EPOXY METAL FILLED |
| C-F-202 Revision F:1985 | FELT SHEER (HAIR) AND FELT ROLL (HAIR) |
| MIL-P-37519 Base Document:1976 | PANCRELIPASE CAPSULES, NF |
| P-S-1792 Base Document:1973 | SOAP, LAUNDRY (NEUTRAL AND BUILT) |
| MIL-C-43424 Revision A:1969 | CLOTHING, COMBAT TYPE, CONTOUR PACKAGING AND PACKING OF |
| MIL-B-2883 Revision D:1988 | BOATSWAIN'S PIPE |
| MIL-J-16128 Revision C:1972 | JAR, BATTERY, LAMINATED RUBBER, SUBMARINE |
| MIL-C-22770 Revision H:1977 | COIL, WIRE |
| MIL-I-25859 Revision C:1995 | INDICATOR, THRUST AEU-2/A, SYNCHRO STYLE, PRESSURE RATIO, 1.2-3.4 UNITS, INTEGRALLY LIGHTED |
| MIL-H-82244 Revision F:1993 | HOOD, RADIOACTIVE CONTAMINANTS, PROTECTIVE |
| PPP-P-1135 Revision B:1984 | PACKAGING OF DUCK FABRICS (COTTON; SYNTHETIC FIBER; COTTON SYNTHETIC FIBER BLENDS) |
| MIL-S-45180 Revision D:1984 | SEALING COMPOUND,GASKET,HYDROCARBON FLUID AND WATER RESISTANT |
| MIL-G-28554 Revision C:1988 | GENERATOR SET, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT, PACKAGING OF |
| MIL-C-52978 Base Document:1980 | CHEST, COLLAPSIBLE TANK |
| MIL-P-63142 Revision B:1990 | PROJECTILE, 8 INCH, RA, M650 LOADING ASSEMBLING AND PACKING |
| L-W-001653 Base Document:1971 | WASTE RECEPTACLE, MOBILE, PLASTIC |
| MIL T 28920 : B | TROUSERS, MENS DRESS [OFFICERS] |
| MIL-A-37751 Base Document:1978 | ASCORBIC ACID TABLETS, USP |
| MIL-M-37677 Base Document:1977 | METHYLTESTOSTERONE TABLETS, USP |
| MIL-B-37160 Revision A:1978 | BUTALBITAL, ASPIRIN, CAFFEINE AND PHENACETIN TABLETS |
| MIL-G-37297 Base Document:1975 | GUAIFENESIN SYRUP, N.F. |
| MIL-C-22079 Revision C:1985 | CARTRIDGE, IMPULSE, MARK 17 MOD 1 |
| MIL-C-37696 Base Document:1978 | CYPROHEPTADINE HYDROCHLORIDE TABLETS, NF |
| MIL-T-36888 Base Document:1972 | TEST KIT, NITROGEN DETERMINATION |
| MIL-T-37316 Revision A:1976 | TERPIN HYDRATE ELIXIR, NF |
| MIL-P-37510 Base Document:1976 | PYRVINIUM PAMOATE TABLETS USP |
| MIL-M-834 Revision L:1989 | MITTEN SET, EXTREME COLD WEATHER |
| AA-D-001918 Base Document:1975 | DESK, FLAT TOP, STEEL, CONTEMPORARY STYLE |
| MIL-B-82792 Base Document:1990 | BROADGOODS, CARBON CLOTH, PHENOLIC IMPREGNATED |
| MIL-C-37441 Revision A:1977 | CEPHRADINE CAPSULES |
| MIL-C-37338 Revision A:1976 | CHLORAMPHENICOL OPHTHALMIC SOLUTION USP |
| MIL-C-37458 Base Document:1976 | CUPRIC SULFATE, NF |
| MIL-C-37501 Base Document:1977 | CHLORDIAZEPOXIDE HYDROCHLORIDE AND CLIDINIUM BROMIDE CAPSULES |
| MIL-C-37294 Revision A:1976 | COLLODION FLEXIBLE USP |
| MIL-I-83245 Revision A:1994 | INDICATOR SET, OIL PRESSURE A/A24J-17 |
| MIL-A-3248 Revision B:1970 | AMYL NITRITE (INHALANTS) |
| XX-C-2812 Base Document:1993 | COMPRESSOR, AIR, DIESEL-ENGINE-DRIVEN, PORTABLE, WHEEL-MOUNTED |
| MIL-I-83262 Revision B:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-E-51454 Revision A:1994 | ETHYL ALCOHOL (ETHANOL) |
| W-A-450 Revision C:1990 | COMPONENTS FOR INTERIOR ALARM SYSTEMS |
| MIL-S-48112 Base Document:1972 | SEALING COMPOUND BUTYL RUBBER SEALANT (FOR USE IN AMMUNITION) |
| MIL-I-27680 Revision C:1973 | INDICATOR, ATTITUDE, ARU-12/A, REMOTE |
| MIL-B-11886 Revision K:1972 | BOXES, METAL, SHIPPING: REUSUABLE, TRANSPORTER STEEL, MAXIMUM LOAD 9000 LBS. |
| MIL-P-25374 Revision B:1985 | PLASTIC SHEET, ACRYLIC, MODIFIED, LAMINATED |
| MIL-A-24280 Revision A:1972 | ANCHORS, MARINE FLUKED, LIGHT WEIGHT TYPE (LWT), (30 DEGREES AND 50 DEGREES FLUKE ANGLES WITH WEDGE-BLOCK ADAPTERS), HIGH STRENGTH CAST STEEL |
| ASTM A 500 : 2003 : REV A | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| SAE AS 85075 : 2000 | TIE DOWN ASSEMBLY, HELICOPTER BLADE, GENERAL SPECIFICATION FOR |
| MIL-S-3443 Revision G:1993 | SHOTGUN, 12 GAGE, RIOT TYPE |
| O-S-571 Revision G:1991 | SODIUM CARBONATE, ANHYDROUS, TECHNICAL |
| MIL-S-22783 Revision C:1972 | SEALING MACHINES, ELECTRICAL IMPULSE (JAW TYPE) |
| MIL C 55116 : B | CONNECTOR, MINIATURE AUDIO, FIVE PIN |
| MIL-B-273 Revision F:1990 | Bag, Drinking Water Storage, Dispensing, Cloth, Cotton Duck, Porous |
| MIL-P-50486 Base Document:1971 | POTASSIUM DINITROHYDROXY HYDROBENZOFUROXAN (FOR USE IN AMMUNITION) |
| MIL-B-52293 Revision C:1992 | BRACKET, RAFT, FOR BRIDGE, FLOATING, PNEUMATIC FLOAT, CLASS 60 |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| MIL-M-46062 Revision C:1985 | MAGNESIUM ALLOY CASTINGS, HIGH STRENGTH |
| ASTM D 1527 : 1999 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80 |
| GG-S-621 Revision C:1977 | SPLINT, WOOD |
| GGG-T-00570 Revision A:1965 | TORCH KIT, SOLDERING (PROPANE GAS) |
| MIL-B-44155 Revision B:1991 | BODY ARMOR, COAT, FOR EXPLOSIVE ORDNANCE DISPOSAL (EOD) UNITS |
| MIL-P-11087 Revision G:1994 | PIPE, STEEL: GROOVED OR PLAIN ENDS |
| MIL T 52849 : C | TEST KIT, PETROLEUM; AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL C 28950 : B | COAT, MANS, DRESS BLUE [OFFICERS] |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| MIL-C-11403 Revision C:1982 | CARBON, TECHNICAL (CARBON BLACK) |
| MIL-DTL-32157 Base Document:2004 | PARKA, ALL-PURPOSE ENVIRONMENTAL, CAMOUFLAGE |
| MIL-O-28969 Revision A:1978 | OVERCOAT, MANS WOOL GABARDINE, BLUE |
| MIL-F-21840 Revision G:1987 | FASTENER TAPES, HOOK AND LOOP, SYNTHETIC |
| MIL C 23216 : C | CONTACTS, ELECTRIC CONNECTOR, GENERAL SPECIFICATION FOR |
| MIL-C-31002 Base Document:1992 | CAP, GARRISON, MANS (COAST GUARD) |
| MIL-DTL-823 Revision L:2005 | CLOTH, SERGE, WOOL, WOOL AND NYLON, POLYESTER AND WOOL |
| MIL-R-81835 Base Document:1971 | REMOVER, ORGANIC COATING, HOT TANK TYPE |
| MIL-I-27673 Revision C:1993 | INDICATOR, TRUE AIRSPEED AVU-15/A |
| SAE AS 8712 : 2013 | VALVE; AIR RELIEF, LOW PRESSURE |
| MIL-S-53120 Base Document:1994 | SUPPORT SYSTEM, SPECIAL DIVER'S AIR (SDASS) |
| MIL P 7788 : F | PANEL, INFORMATION INTEGRALLY ILLUMINATED |
| MIL-L-85297 Base Document:1980 | LEAD, EXPLOSIVE MARK 24 MOD O MARK 25 MOD O |
| MIL I 27189 : D | INDICATOR, PRESSURE OIL |
| MIL-P-6131 Revision C:1984 | PLUG, DEHYDRATOR, HUMIDITY, INDICATING |
| MIL-C-13602 Revision C:1967 | CASE, PANEL MARKER FOR AERIAL COMMUNICATION PANEL MARKER SETS AP-30-C AND AP-30-D |
| MIL-C-82865 Base Document:1989 | CARTRIDGE, IMPULSE, MARK 152 MOD 0, MARK 153 MOD 0, MARK 154 MOD 0, &MARK 155 MOD 0 |
| GGG-T-330 Revision B:1967 | THREADING SET, SCREW |
| ASTM C 1447/C1447M : 2004 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
| MIL-P-63141 Revision B:1985 | PROJECTILE, 8-INCH, HE, RA, M650 BOOSTER AUXILIARY PA-500 & BOOSTER ASSEMBLY PA-524 FOR |
| MIL-M-51500 Revision A:1988 | METHYLPHOSPHONIC DIFLOURIDE, TECHNICAL |
| MIL-T-50059 Revision B:1983 | TITANOUS SULFATE SOLUTION, 20-PERCENT (METRIC) |
| MIL-R-25410 Revision G:1991 | REGULATORS, OXYGEN, DILUTER-DEMAND AUTOMATIC-PRESSURE BREATHING |
| DOD HDBK 263 : LATEST | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)METRIC |
| MIL-A-50460 Revision A:1973 | AMMONIUM NITRATE, PRILLED (FOR USE IN AMMUNITION) |
| MIL-S-48747 Revision B:1982 | SAFE AND ARMING DEVICE FOR MINES, M718/M741 SYSTEM |
| MIL-B-3180 Revision E:1990 | BOILERS AND RELATED EQUIPMENT; PACKAGING OF |
| MIL J 7823 : E | JACKETS, FLYERS INTERMEDIATE TYPE G 1 |
| MIL-C-18539 Base Document:1955 | CARTRIDGE, SLICK MARKER AN- MK 1 MOD 0 |
| MIL-P-8045 Revision B:1964 | PLASTIC SELF-SEALING AND NON SELF-SEALING TANK BACKING MATERIAL |
| MIL-R-83309 Base Document:1971 | REPAIR MATERIAL, NITRILE, FUEL, BLADDER, AIRCRAFT |
| MIL-B-48056 Base Document:1972 | BARRIER MATERIAL, FLEXIBLE, WATERVAPORPROOF, PUNCTURE-RESISTANT, HEAT SEALABLE FOR PACKAGING AMMUNITION |
| MIL-DTL-6852 Revision C:2014 | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT, GENERAL SPECIFICATION FOR |
| MIL-D-16791 Revision G:1990 | DETERGENT, GENERAL PURPOSE (LIQUID, NONIONIC) |
| MIL-I-5914 Revision E:1993 | INDICATOR, RATE OF FLOW, FUEL TYPE EFU 24/A AND TYPE EFU 25/A |
| MIL-M-18058 Revision G:1990 | MACHINERY, METAL & WOODWORKING PACKAGING OF |
| MIL-T-55631 Base Document:1972 | TRANSFORMER, INTERMEDIATE FREQUENCY, RADIO FREQUENCY, AND DISCRIMINATOR, GENERAL SPECIFICATION FOR |
| MIL-D-42048 Base Document:1987 | DEPLOYABLE MEDICAL SYSTEMS, GENERAL REQUIREMENTS FOR |
| MIL R 82791 : 0 | RUBBER, SILICONE, RTV |
| MIL-P-51269 Base Document:1968 | PHOSPHOROUS PENTACHLORIDE, ANALYZED REAGENT |
| MIL-C-52464 Revision C:1992 | CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER |
| MIL-S-52365 Revision B:1972 | SURVEYING SET, ARTILLERY FIRE CONTROL, FOURTH ORDER, PACKAGING OF |
| MIL-T-70988 Base Document:1990 | TRACER ASSEMBLY, 12525043 |
| TT-P-1536 Revision A:1975 | PLUMBING FIXTURE SETTING COMPOUND |
| L-P-506 Revision A:1963 | PLASTIC SHEET AND FILM, POLYSTYRENE, BIAXIALLY ORIENTED |
| O-S-809 Revision E:1990 | SULFURIC ACID, TECHNICAL |
| MIL B 85036 : A | BARRIER MATERIAL, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS |
| A-A-2767 Base Document:1992 | INK, DRAWING, WATERPROOF, BLACK |
| MIL-E-15330 Revision D:1977 | EXPANSION JOINT, PIPE, SYNTHETIC RUBBER, FIRE RETARDANT (NAVY) |
| MIL-C-12517 Revision A:1965 | CASE, HYDROGEN GENERATOR SET (CASE CY-219 ()/TMQ-3) |
| MIL-A-21016 Revision F:1990 | ADHESIVE, RESILIENT DECK COVERING |
| MIL-I-24330 Base Document:1968 | INSULATION SHEET, ELECTRICAL, LIGNO CELLULOSIC, HIGH DENSITY, HARDBOARD |
| MIL-E-52714 Revision C:1992 | EQUIPMENT, CABLE REINFORCEMENT FOR PANEL BRIDGE M-2 (BAILEY TYPE) |
| MIL-T-52340 Revision B:1991 | TOOL, VERTICAL CONNECTING, ERECTION EQUIPMENT FOR BRIDGE, FLOATING, PNEUMATIC FLOAT CLASS 60 |
| MIL-N-47061 Base Document:1974 | N-PHENYLMORPHOLINE |
| MIL-P-11268 Revision L:1983 | PART, MATERIALS, AND PROCESSES USED IN ELECTRONIC EQUIPMENT |
| MIL-C-24915 Revision A:1991 | CLOTH, DENIM, COTTON (FLAME RETARDANT TREATED) |
| MIL-I-81845 Revision A:1972 | INITIATOR, CARTRIDGE ACTUATED JAU-1/B |
| MIL-S-7877 Revision B:1956 | Seat, Passenger, Cabin Folding |
| MIL-C-41814 Revision F:1986 | COUNTER, FOOTWEAR |
| GGG-B-485 Revision B:1978 | BLOCK, TACKLE, WIRE ROPE, WITH SWIVEL HOOK, (FOR CRANE USE) |
| MIL-S-50080 Revision A:1961 | SCREEN, FLOCKED GRID |
| MIL C 215 : C | CHEMICAL AGENT, WHITE PHOSPHORUS [WP] |
| MIL-C-47011 Base Document:1974 | COATING, SILVER CONDUCTIVE, ELECTRICAL AND THERMAL |
| MIL-C-51448 Base Document:1978 | CANISTER |
| L-P-380 Revision C:1973 | PLASTIC MOLDING MATERIAL METHACRYLATE |
| MIL C 82656 : 1977 | CARBON BLACK |
| MIL-B-44314 Base Document:1987 | BODY ARMOR, SMALL ARMS PROTECTIVE, AIRCREWMAN |
| MIL-B-85107 Revision B:1988 | BEARING, SPIN (SIDEWINDER) |
| MIL-D-6728 Revision A:1956 | DAMPER, ENGINE EXHAUST FLAME AND GLARE |
| MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
| C-F-158 Revision C:1969 | FEATHER, LAND FOWL, (WHOLE) AND (CRUSHED) |
| MIL-S-44016 Revision B:1989 | SLEEPING BAG, INTERMEDIATE COLD, SYNTHETIC FILLED |
| MIL-A-37569 Revision A:1978 | |
| MIL-C-20061 Revision D:1979 | CLINOMETERS, SHIP, AND ACCESSORIES |
| MIL-B-43998 Revision D:1992 | BATH UNIT, AUTOMATED, MULTI-HEAD |
| MIL W 3970 : C | WAVEGUIDE ASSEMBLIES, RIGID, GENERAL SPECIFICATION FOR |
| MIL-F-37252 Base Document:1975 | FENTANYL CITRATE AND DROPERIDOL INJECTION |
| MIL-T-37514 Revision A:1977 | TOBRAMYCIN SULFATE INJECTION, USP |
| L-P-528 Revision B:1976 | PLASTIC SHEET, PRESSURE SENSITIVE ADHESIVE COATED, PAPER-BACKED |
| MIL DTL 0022362 : E | CARTRIDGE, IMPULSE, MARK 18 MOD 0 |
| MIL-M-55336 Base Document:1971 | MAINTENANCE ACCESSORY KIT, MK-1192( ) /ARM (UNITS OF) |
| MIL-M-37344 Base Document:1975 | MAGALDRATE ORAL SUSPENSION USP |
| MIL-S-36751 Revision B:1977 | SOYABEAN CASEIN DIGEST AGAR MEDIUM DEHYDRATED |
| MIL-Q-37808 Base Document:1977 | QUINIDINE SULFATE TABLETS MODIFIED |
| ASTM A 390 : 2006 : R2011 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| MIL-T-37666 Base Document:1977 | TROPICAMIDE OPHTHALMIC SOLUTION, USP |
| MIL-C-37355 Revision A:1975 | CLOMIPHENE LITRATE TABLETS USP |
| MIL M 21649 : C | MOUNT, RESILIENT, TYPE 5M1O,OOO-H |
| MIL-F-37349 Revision A:1976 | FLUOCINOLONE ACETONIDE TROPICAL SOLUTION USP |
| MIL-M-37401 Base Document:1976 | METHYSERGIDE MALEATE TABLETS, USP |
| MIL-A-53129 Base Document:1992 | ALARM-MONITOR GROUP OA-9431/FSS-9(V) |
| MIL-C-87026 Revision A:1988 | COAT, MAN'S, POLYESTER/WOOL, SERGE (COAST GUARD) |
| MIL N 37136 : 0 | NORETHINDRONE WITH MESTRANOL TABLETS |
| ASTM F 2648/F2648M : 2017 : REDLINE | Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications |
| MIL-DTL-62749 Revision A:2010 | BRIDGE, FIXED: ALUMINUM, HIGHWAY, UNITED KINGDOM, MEDIUM GIRDER AND ERECTION, AND TRANSPORTATION EQUIPMENT, FULLY COMPETITIVE COMPONENTS FOR |
| ASTM F 2191 : 2002 : R2008 | Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
| MIL-F-37617 Base Document:1977 | FLURANDRENOLIDE OINTMENT, USP |
| MIL-G-37331 Revision A:1976 | GLUCOSE TEST SOLUTION |
| MIL-T-36898 Base Document:1972 | TEST STRIPS AND COLOR CHART, URINARY GLUCOSE AND PROTEIN |
| MIL-O-37272 Revision A:1976 | OXYTRIPHYLINE AND GUAIFENESIN TABLETS |
| MIL-M-37533 Base Document:1977 | METRONIDAZOLE TABLETS, USP |
| MIL-H-37713 Base Document:1977 | HYDROXYZINE HYDROCHLORIDE SYRUP, NF |
| MIL-T-37271 Revision A:1976 | TETRACAINE OINTMENT, NF |
| MIL-R-37053 Revision B:1978 | REFRACTOMETER, HAND, ALUMINUM |
| MIL-W-45562 Revision C:1992 | WELDING AND SOLDERING EQUIPMENT, SUPPLIES AND ACCESSORIES, PACKAGING OF |
| MIL-D-51389 Revision A:1979 | DETECTOR UNIT, CHEMICAL AGENT AUTOMATIC ALARM, ABCA-M43 |
| MIL-I-27623 Revision C:1972 | INDICATOR, ATTITUDE, REMOTE STANDBY, 2 INCH |
| PPP-B-2920 Base Document:1997 | BOILERS AND RELATED EQUIPMENT, PACKAGING OF |
| ASTM B 102 : 2000 : R2005 | Standard Specification for Lead- and Tin-Alloy Die Castings (Withdrawn 2011) |
| UU-P-663 Revision B:1972 | PAPERBOARD, DRAWING |
| MIL-T-37470 Base Document:1977 | TUBERCULIN, USP, PURIFIED PROTECTION DERIVATIVE |
| MIL-B-11844 Revision D:1976 | BRIDGE, FIXED: STEEL, PORTABLE PANEL, BAILEY TYPE M2 (WIDENED ROADWAY) |
| MIL-P-82887 Base Document:1993 | Propellant, M6+2 For The 76MM/62 Caliber Cartridge |
| MIL-S-82850 Base Document:1987 | SPRING, BELLEVILLE WASHER, ARM ENABLE SWITCH |
| MIL-I-25950 Revision B:1967 | INDICATOR, PRESSURE, OIL, 0-100 PSI |
| MIL-I-7087 Revision A:1968 | INDICATOR, PRESSURE OIL, 0-200 PSI |
| ASTM F 289 : 1996 : R2009 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| MIL-P-49115 Revision A:1977 | PLATOON EARLY WARNING SYSTEM AN/TRS-2() |
| MIL-E-8697 Revision E:1972 | ELECTRODE, WELDING, COVERED LOW HYDROGEN HEAT TREATABLE STEEL |
| MIL-B-27036 Revision A:1962 | BOMB, LOADING PRACTICE BDU-9/E |
| DOD A 24581 : 0 | ANCHOR, NAVY STOCKLESS TYPE (METRIC) |
| MIL-L-50429 Revision A:1972 | Laminate, Acetal and Cloth, (for Use with 81mm Ammunition) |
| MIL-E-50011 Revision C:1994 | ETHANOLAMINES (MONOETHANOLAMINE, DIETHANOLAMINE, AND TRIETHANOLAMINE), TECHNICAL |
| MIL-G-44108 Revision A:1987 | GLOVE, COMBAT VEHICLE CREWMAN'S SUMMER |
| MIL G 2697 : A | GLASS, PORTLIGHT, CIRCULAR, HEAT TREATED |
| MIL L 25567 : D | LEAK DETECTION COMPOUND, OXYGEN SYSTEMS (METRIC) |
| ASTM C 508/C508M : 2000 : R2009 : EDT 1 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| MIL-I-7071 Revision B:1972 | INDICATOR, TEMPERATURE, THERMOCOUPLE HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL S 24656 : 0 | |
| MIL-I-83117 Revision B:1975 | INDICATOR, ANGLE OF ATTACK |
| MIL-P-85315 Base Document:1979 | Pump, Ejector, Air Vehicle Fuel, General Specification For |
| MIL-D-36354 Revision D:1976 | DIOCTYL CALCIUM SULFOSUCCINATE CAPSULE 0.24 CM [4 GRM] |
| MIL-T-43853 Revision B:1978 | TROUSERS, MEN'S, ARMY TAN 445, DURABLE PRESS |
| MIL-B-25846 Revision B:1961 | BOMB, PRACTICE, PROFILE BDU-8/B |
| MIL S 9320 : C | SIGNAL, WARNING, AUDIBLE, FOR HEADSET |
| MIL-B-3865 Revision D:1990 | BLOCKS, ROPE, TACKLE: PACKAGING OF |
| MIL B 11040 : E | BELT, V: ENGINE ACCESSORY DRIVE |
| SAE AS1960 | COUPLING ASSEMBLY, V-BAND, SHEET METAL FLANGE, PNEUMATIC TUBE |
| MIL H 53027 : A | HOSE ASSEMBLY, RUBBER; LIGHTWEIGHT, COLLAPSIBLE, 6 INCH; FOR DRINKING (POTABLE) WATER |
| MIL L 29151 : 0 | LOCK AND LOCK SETS, EXTERIOR, ORDNANCE, HIGH SECURITY |
| MIL-M-36997 Base Document:1990 | MAILING CASE SECTION, MICROSCOPE SLIDE, CHIPBOARD, 12S |
| TT-I-1795 Revision A:1973 | INK, MARKING, STENCIL, OPAQUE (POROUS AND NON-POROUS SURFACES) |
| NNN F 800 : A NOTICE 1 | FUNNEL SEPARATORY |
| MIL-P-45213 Revision E:1989 | PRESERVATION AND PACKING OF ROCKET AND MISSILE SYSTEMS EQUIPMENT FOR SHIPMENT |
| MIL-C-10387 Revision J:1992 | COUPLINGS, CLAMP, PIPE; WITH BOLTS AND SYNTHETIC-RUBBER GASKETS FOR GROOVED-END PIPE |
| GGG-B-50 Revision A:1966 | BAG, LINEMAN'S TOOL, ROUND |
| MIL-B-36282 Base Document:1964 | BEAD, GLASS, LABORATORY, PLASTIC SPECTACLE FRAME WARMER, 5 LB |
| MIL-I-3578 Revision B:1974 | INKING PAD, RUBBER STAMP, [FOOD INSPECTION, VETERINARY] |
| MIL-M-37217 Base Document:1976 | METER SALINITY INDICATING, ELECTRIC, FLUSH MOUNTING RECTANGULAR |
| O-I-00490 Revision B:1974 | INHIBITOR, CORROSION, LIQUID COOLING SYSTEM |
| MIL-V-45554 Revision D:1989 | VULCANIZING EQUIPMENT, INCLUDING RELATED ITEMS, TIRE AND TUBE, REBUILD AND REPAIR, PREPARATION FOR DELIVERY OF |
| MIL-T-1180 Revision D:1981 | THERMOMETER, SELF-INDICATING LIQUID IN GLASS |
| MIL-T-10767 Revision F:1968 | TOWER (COMPONENTS OF) |
| MIL-H-21594 Revision C:1986 | Hookpoint, Aircraft Arresting |
| MIL P 47115 : A | PAINT, EPOXY, ABRASION, HEAT AND CORROSION RESISTANT |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| GG-E-671 Revision B:1972 | ERASER, STEEL |
| MIL-W-7072 Revision B:1962 | WIRE, ELECTRIC 600 VOLT, ALUMINUM, AIRCRAFT GENERAL SPECIFICATION FOR [ASG] |
| MIL-S-20197 Revision C:1977 | SCALE, PLOTTING, PRECISION, CENTIMETRES AND INCHES, WITH CASE |
| P-T-1544 Revision A:1975 | TEST KIT (DETERGENT CONCENTRATION AND WATER HARDNESS) |
| L E 00530 : B | ENVELOPE, TRANSPARENT |
| MIL-C-6235 Revision D:1970 | COMPASS, MAGNETIC, UNMOUNTED POCKET SURVIVAL |
| MIL M 16034 : A | METER, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES) |
| DD B 00510 : A | BOTTLE, ASPIRATOR, GLASS |
| GG-C-106 Revision A:1961 | CALIPER, EYE, CASTROVIEJO |
| NNN-F-001652 Base Document:1970 | FUNNEL COMMON LABORATORY POLYPROPYLENE RIBBED |
| MIL-C-60303 Revision B:1971 | CARTRIDGE, 40 MM: RIOT CONTROL, CS, M674 |
| MIL-T-44047 Revision E:1991 | TROUSERS, CAMOUFLAGE PATTERN, COMBAT |
| MIL-DTL-24215 Revision E:2015 | Attenuators, Variable (Coaxial), General Specification for |
| MIL-B-52598 Revision B:1969 | BAG, SAND: ACRYLIC |
| MIL C 40137 : E | CLEVISES, RIGGING, AIR DELIVERY TYPE, GENERAL SPECIFICATION FOR |
| TT S 001543 : A | SEALING COMPOUND, SILICONE RUBBER BASE (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| MIL-S-43766 Revision A:1988 | SUPPORT ASSEMBLY, ARCH, INFLATABLE SHELTER SECTION (MUST) |
| MIL R 0036579 : 0 | ROD, STIRRING, LABORATORY, POLYTETRAFLUOROETHYLENE |
| NNN-S-450 Revision B:1976 | SLIDE MICROSCOPE |
| MIL B 0037189 : A | BAGS, URINE COLLECTION |
| GG-H-590 Base Document:1959 | HOLDER, RADIOGRAPHIC FILM CASSETTE |
| DDD-L-20 Revision F:1990 | LABEL: FOR CLOTHING, EQUIPAGE, AND TENTAGE, (GENERAL USE) |
| MIL-B-44286 Revision A:1990 | BEEF, ROAST, CHUNKED AND FORMED WITH MUSHROOM GRAVY, THERMOSTABILIZED, TRAY PACK |
| KK-C-450 Revision F:1986 | CLOTHING, LEATHER, (APRONS, SLEEVES, AND JACKETS) |
| MIL-C-13743 Revision A:1969 | CORE, STEEL, HARDENER, FOR ARMOR-PIERCING TYPES OF SMALL ARMS AMMUNITION |
| MIL C 26518 : B | CONNECTOR, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTING, 2OO DEGREES C AMBIENT TEMPERATURE |
| MIL-T-25485 Revision C:1974 | TRANSMITTER, THRUST, SINGLE SYNCHRO STYLE, PRESSURE RATIO, TYPE MK-2 |
| MIL-C-3779 Revision E:1991 | CASE, ENGINEER BATTALION, DRAFTING EQUIPMENT, CANVAS |
| MIL-C-14039 Revision C:1981 | COMPASS, SUN, UNIVERSAL TYPE 0 TO 90 DEGREES, NORTH AND SOUTH LATITUDES, WITH CARRYING CASE |
| MIL-J-8279 Revision G:1988 | Jacket, Cold Weather (No S/S Document) |
| MIL-V-85374 Base Document:1979 | VISOR, SHATTER RESISTANT |
| GGG-B-001351 Base Document:1968 | BROACH, JEWELLER'S AND PIVOT |
| O-F-1044 Revision B:1975 | FUEL, ENGINE PRIMER: COLD STARTING IN PRESSURIZED AND NONPRESSURIZED CONTAINERS |
| PPP-B-665 Revision D:1972 | BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS |
| MIL-C-43135 Revision J:1993 | CHICKEN AND CHICKEN PRODUCTS, COOKED, DEHYDRATED |
| MIL-B-43706 Revision A:1980 | BAGS, PLASTIC, BREAD |
| GG-H-109 Revision B:1975 | HANGER, X-RAY FILM |
| MIL-G-29114 Revision A:1977 | GLOVES, CLOTH, VINYL COATED, MEN'S AND WOMEN'S |
| MIL-P-50088 Revision A:1960 | PURIFIER, AIR, M2A1 |
| NNN D 001290 : D | DESICCATOR LABORATORY AND DESICCATOR PLATES |
| MIL-I-21070 Revision B:1965 | INSULATING SHEET AND TAPE, ELECTRICAL, REINFORCED MICA PAPER |
| DDD-P-66 Revision B:1973 | PAD, SANITARY |
| GG-D-600 Revision D:1982 | DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS |
| MIL M 11193 : D | MICROPHONE, CARBON (MICROPHONES M-29) (/U & M-52) (/U) |
| MIL-P-22561 Revision C:1982 | PIPE AND PIPE FITTINGS, ACID RESISTANT |
| MIL-C-51012 Revision B:1982 | 0-CHLOROBENZALDEHYDE, TECHNICAL |
| SS J 570 : B NOTICE 1 | JOINT COMPOUNDS AND TAPE, WALLBOARD (FOR GYPSUM WALLBOARD CONSTRUCTION) |
| PPP-P-420 Revision B:1972 | PLUG AND FLANGE (FOR DRUM CLOSURE) |
| MIL-A-49186 Base Document:1979 | ADAPTER, TONE-SIGNALLING TA-977()/PT |
| MIL-V-18318 Revision B:1966 | VALVE, PRESSURE REGULATING, OXYGEN SYSTEM |
| TT-I-535 Revision D:1972 | INK, DUPLICATING MACHINE STENCIL, PASTE, BLACK |
| GG-C-560 Revision D:1986 | COMPASSES, MAGNETIC, SURVEYORS & TRANSIT, POCKET, WITH OPTIONAL BALL & SOCKET JOINT OR BALL & SOCKET HEAD, & JACOBS STAFF |
| MIL-T-26963 Revision D:1992 | TESTER, PRESSURE GAGE, HYDRAULIC, PORTABLE TYPE MP-1 |
| MIL-D-771 Revision E:1990 | DISTRIBUTOR, BITUMEN AND WATER, PACKAGING OF |
| MIL-C-10664 Revision C:1981 | CHLOROPICRIN, TECHNICAL |
| MIL-L-13078 Revision A:1955 | LOUDSPEAKER, DYNAMIC LS-112/U, LS-116/U, LS-148/U, LS-160/U, LS-179/U, LS-181/U AND LOUDSPEAKER ASSEMBLY LS-154/U AND LS-206/U |
| MIL G 22253 : B | GENERATOR, GAS MK 1 MOD 0 LOADED ASSEMBLY |
| UU-C-00620 Revision C:1967 | COVER, HEADREST, PAPER (DENTAL CHAIR) |
| MIL-C-23935 Revision A:1971 | CARTRIDGE, IMPULSE, MARK 47 MOD O |
| MIL D 53015 : NOTICE 2 | DISPLACEMENT & EVACUATION KIT, 6 INCH HOSELINE |
| MIL-S-37475 Base Document:1976 | SPIRONOLACTONE TABLETS,USP |
| MIL-I-37359 Revision A:1976 | ISORBIDE DINITRATE TABLETS, USP |
| MIL-B-40098 Revision H:1989 | BURNER UNIT, GASOLINE, FIELD RANGE OUTFIT, M2A |
| GG-T-250 Revision A:1974 | TESTER, ANTIFREEZE SOLUTIONS |
| MMM-A-189 Revision C:1985 | ADHESIVE SYNTHETIC RUBBER THERMOPLASTIC GENERAL PURPOSE |
| AA-D-191 Revision A:1955 | DESK, STEEL, GENERAL OFFICE |
| MIL C 81543 : B | CONTAINER ASSEMBLIES, INFLATABLE LIFE RAFT |
| MIL I 37093 : 0 | ISOPROTERENOL HYDROCHLORIDE AEROSOL |
| MIL-B-40611 Revision C:1972 | BAGGING MACHINE, FRUIT AND PRODUCE |
| MIL-B-1851 Revision F:1981 | BAND, HELMET |
| MIL-C-6590 Revision C:1985 | CLOTH, PILE [SYNTHETIC MOUTON, KNITTED] |
| AA-S-00300 Revision A Interim Revision:1967 | SHELF, FILING |
| PPP-P-1899 Base Document:1974 | PREPARATION FOR DELIVERY REQUIREMENTS FOR TABLES, STEEL, GENERAL OFFICE |
| MIL-C-10085 Revision E:1977 | CUTTERS, PHOTOGRAMMETRIC, SLOTTED-TEMPLATE: HAND-OPERATED |
| MIL-F-40048 Revision C:1984 | FLAGSTAFFS AND INSIGNIA, FLAGSTAFF HEADS, GENERAL SPECIFICATION FOR |
| MIL-C-37722 Base Document:1978 | COVER, SURGICAL INSTRUMENT AND DRESSING CABINET |
| DOD-I-51323 Revision C:1985 | INSECTICIDE, DICHLORVOS, IMPREGNATED STRIP (METRIC) |
| MIL-F-44324 Revision A:1988 | FIELD PACK, LARGE WITH INTERNAL FRAME: & PACK, PATROL, COMBAT |
| MIL-T-11591 Revision D:1964 | TAMPER, ARMATURE COIL WINDING |
| MIL-T-14643 Revision C:1994 | TAG, IDENTIFICATION, INDIVIDUAL, PLASTIC, AIR FORCE |
| HH-P-31 Revision F:1987 | PACKING AND LAGGING MATERIALS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE |
| UU-S-625 Revision A:1965 | |
| MIL-P-52559 Revision B:1974 | PIPE STEEL WEIGHT COATED, FOR SUBMARINE PIPELINE SYSTEMS |
| MIL-I-43561 Revision A:1977 | INSECT NET, HEAD AND HAND, SET |
| MIL L 25370 : E | LIFE PRESERVER INFLATING ASSEMBLY, MA-1 |
| GGG-D-780 Revision A:1965 | DRIVER, PROJECTILE, UNIT, POWDER ACTUATED (TRIGGER-FIRED, LOW VELOCITY, PISTON TYPE) |
| AA-O-00240-4 Revision C Interim Revision:1970 | CREDENZA, OFFICE, STEEL |
| MIL-M-12563 Base Document:1953 | MANIFOLD, GAS CYLINDER (MANIFOLD ML-344/TMQ-3) |
| MIL E 37266 : A | ERGONOVINE MALEATE TABLETS NF |
| MIL-E-37399 Revision A:1978 | ERYTHROSINE SODIUM SOLUBLE TABLETS |
| MIL-A-37194 Revision A:1978 | ALUMINUM ACETATE SOLUTION TABLETS, EFFERVESCENT |
| MIL-A-21380 Revision B:1965 | ABRASIVE MATERIALS: FOR BLASTING |
| MIL-L-48063 Revision A:1973 | LAUNCHER, ROCKET, LAU 68B/A SHIPPING ASSEMBLY |
| MIL-A-37234 Base Document:1977 | APPARATUS, ANAEROBIC CULTURE |
| MIL L 12606 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 3 INCH AND 4 INCH DIAMETER CONE, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), TYPE LL-445/U, M12606-01, AND M12606-02 |
| MIL-F-11698 Revision D:1988 | FASTENER, QUICK RELEASE, ALUMINUM, |
| MIL-S-46172 Revision A:1984 | STEEL FORGINGS |
| P-P-101 Revision E:1973 | PAPER, ABRASIVE, SILICON CARBIDE, WATERPROOF |
| GG-T-258 Revision A:1967 | TESTER, BATTERY ELECTROLYTE SOLUTION |
| TT-I-1788 Base Document:1972 | INK, DUPLICATING, LITHOGRAPHIC PROCESS KIT |
| MIL-B-1947 Revision A:1960 | BLOWER, SOOT (SHIPBOARD USE) |
| MIL F 12548 : A | FILTER, LOW PASS F-215/G AND FILTER, HIGH PASS F-216/G |
| MIL-A-55147 Revision B:1970 | AMPLIFIER-POWER SUPPLY GROUP OA-3633()/GRC |
| MIL-T-26089 Base Document:1957 | TAPE, TEXTILE, NYLON, LOOP |
| GG-B-0089 Revision C:1967 | BAND, ABRASIVE, (SILICON CARBIDE) |
| MIL-W-81319 Revision A:1967 | WHEEL, ABRASIVE, NON-WOVEN NYLON, RESIN REINFORCED |
| EE-C-1827 Revision A:1984 | DINING PACKETS (DIETETIC OR NONDIETETIC, TRAY SERVICE) |
| HH-I-515 Revision E:1992 | INSULATION, THERMAL (LOOSE-FILL FOR PNEUMATIC OR POURED APPLICATION): CELLULOSIC OR WOOD FIBER |
| MIL-C-44253 Revision A:1988 | CORNED BEEF HASH, THERMOSTABILIZED, TRAY PACK |
| MIL-F-55614 Revision B:1976 | FILTER, INFRARED INTERFERENCE-TYPE (PINK) FOR SEARCHLIGHT, INFRARED 28-VOLT, 110-AMPERE |
| MIL-A-52685 Base Document:1970 | ADHESIVE: BONDING, CHLOROPRENE AIR FIELD, MEMBRANE SURFACING |
| MIL-T-70681 Base Document:1988 | TRIPHENYL BISMUTH |
| MIL-A-52174 Revision B:1972 | ALUMINUM ALLOY DUCT SHEET |
| TT-A-516 Revision D:1962 | AMYL ALCOHOL, SECONDARY |
| MIL-B-42027 Base Document:1986 | BROACH, PULP CANAL, BARBED, STERILE |
| MIL-A-23871 Revision A:1967 | ANODES, CORROSION PREVENTIVE, LEAD ALLOY ROD SHAPED |
| MIL-A-23987 Revision A:1989 | A-FRAME, PONTOON TUG: PREFABRICATED, KNOCKED DOWN |
| MIL-C-22016 Base Document:1959 | CARTRIDGES (STANDARD), MARTIN-BAKER MK 5, EJECTION SEAT |
| MIL-R-14368 Revision C:1974 | REGULATOR ASSEMBLY, RELAY ASSEMBLY, AND VOLTAGE REGULATOR ASSEMBLY: 24-VOLT (NOMINAL RATING), 100 TO 400 AMPERE, DIRECT CURRENT |
| MIL P 36745 : 0 | PAPER, FILTER QUALITATIVE (SWIPE MATERIAL) |
| MIL-C-26237 Revision C:1983 | CRADLE, AIRCRAFT-MISSILE COMPONENTS MMU-1/E |
| MIL-P-81351 Revision A:1976 | PEROXIDE, METHYL ETHYL KETONE |
| MIL-G-81065 Revision A:1967 | GYRO-PENDULUM ASSEMBLY (FOR TORPEDO MK 46 MOD O AND MK 46 MOD 1) |
| GG-E-916 Revision F:1987 | EXPLORERS, DENTAL; EXPLORER-PROBE, DENTAL |
| MIL-R-25506 Revision C:1982 | Resin Solution, Silicone, Low-Pressure Laminating |
| GGG-E-926 Revision C Interim Revision:1968 | EXTRACTOR; COTTER PIN |
| MIL C 26516 : 0 | CAP, LUBRICATION FITTING, PROTECTIVE |
| MIL-I-25941 Revision D:1986 | INDICATOR, TURN AND SLIP, 2-INCH SIZE, INTEGRALLY LIGHTED |
| NNN-B-001194 Base Document:1966 | BOTTLE DROPPER AND DROPPING TK |
| NNN-T-001529 Revision B:1970 | TEST PAPER HYDROGEN ION |
| SAE AS 6055 : 2006 | DRUM, METAL REUSABLE, SHIPPING AND STORAGE (CAP. FROM 88 TO 510 CUBIC INCHES) |
| MIL-P-46892 Revision A:1980 | PLASTIC MOLDING MATERIAL, EPOXY, GLASS FIBER |
| MIL-D-11933 Revision B:1955 | DUMMY LOAD, ELECTRICAL A-64/UP |
| MIL-B-18876 Revision A:1976 | BOX, AMMUNITION, 40 MM MARK 1 MOD 0 |
| MIL-B-550 Revision A:1958 | Barium Chromate |
| P-C-535 Revision B:1978 | CLEANING COMPOUND, PLATERS ELECTROCLEANING, FOR STEEL |
| MIL-F-81738 Base Document:1969 | FLARE, AIRCRAFT, PARACHUTE, MK 45 MOD O |
| FF-S-111 Revision D:1974 | SCREW, WOOD |
| MIL-R-9299 Revision C:1968 | RESIN, PHENOLIC, LAMINATING |
| MIL-L-63470 Base Document:1981 | Lithium Chloride (For Use In Ammunition) |
| GGG-S-775 Revision A:1960 | STUD REMOVER AND SETTER |
| MIL-C-81350 Base Document:1966 | CATECHOL, 4-TERTIARY BUTYL |
| MIL-J-7093 Revision A:1964 | JATO MARK 6 MOD 1 |
| MIL-C-46614 Base Document:1961 | CLUSTER, INCENDIARY BOMB, PTV, 750 & POUND, M35 (W/O FUZE, FIN, AND WIRE) |
| MIL-O-27525 Base Document:1962 | OVERCOAT, SURVIVAL, ARCTIC SRU-6/P |
| FF-F-133 Revision A:1967 | FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE) |
| MIL-C-00337 Revision C:1969 | CHEMICAL AGENT, PLASTICIZED WHITE PHOSPHOROUS (PWP) |
| GGG F 00360 : D | FINGER, MECHANICAL, AND RETRIEVER TOOL, MAGNETIC |
| MIL T 18460 : 0 | TEST SET, INDICATOR, AN/APM-74 |
| MIL-B-82548 Revision A:1989 | BOMB, GENERAL PURPOSE, MARK 82, 500 POUND, EXPLOSIVE LOADING, ASSEMBLING AND PACKING |
| MIL-C-87970 Base Document:1982 | CONTROL SET, GYROSCOPE, ATTITUDE HEADING AN/ASN-129 |
| MIL-H-55351 Base Document:1971 | HEADSET-MICROPHONE KIT MK-1564()/AIC (COMPONENTS OF) |
| MIL-A-50926 Revision A:1975 | ADHESIVE MR-23 (FOR USE IN AMMUNITION) |
| MIL H 53076 : 1987 | HEMTT TANKER AVIATION REFUELING SYSTEM (HTARS) |
| MIL-G-27693 Revision A:1962 | GYROSCOPE, DISPLACEMENT SBU-6/A, ROLL AND PITCH |
| MIL-A-47040 Base Document:1974 | ADHESIVE-SEALANT, SILICONE, RTV, HIGH TEMPERATURE |
| MIL I 82736 : A | IGNITION PELLETS, MAGNESIUM-FLUOROCARBON |
| PPP-P-1877 Revision A:1977 | PACKAGING AND PACKING OF WOOD OFFICE FURNITURE |
| MIL-M-29460 Base Document:1990 | MODULE, WATER PUMP (SIXCON) |
| GGG-H-00110 Base Document:0196 | HANDLING TOOL, SHEET MATERIAL (VACUUM TYPE) |
| MIL M 4803 : D | MOTOR-GENERATOR, 400 HZ PRECISE OUTPUT, GENERAL REQUIREMENTS FOR |
| ASTM F 810 : 2012 | Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields |
| O-N-335 Base Document:1962 | NICKEL SALT, ELECTROPLATING |
| MIL-DTL-15011 Revision K:2013 | Pallets, Material Handling, Wood Post Construction, 4-Way Entry |
| GGG H 580 : A | HOOK, MATERIAL HANDLING, HAND |
| MIL-C-22656 Revision B:1971 | CARTRIDGE, IMPULSE, MARK 44 MOD O |
| MIL-N-25161 Revision C:1969 | NOZZLE, AERIAL PRESSURE REFUELING, TYPE MA-2 |
| MIL L 10911 : D | LOUDSPEAKER, PERMANENT MAGNET (UNENCASED, 2.5-, 3-, 4-, 5-, 6-, 8-, 10-, AND 12-, INCH DIAMETER CONE) |
| AASHTO M 32M/M 32 : 2009 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| MIL-G-5678 Revision C:1964 | GAGE PRESSURE, DIAL INDICATING, MANIFOLD PRESSURE |
| MIL D 37727 : NOTICE 2 | DIPHENHYDRAMINE HYDROCHLORIDE SYRUP |
| MIL-C-3873 Revision E:1976 | CROTAMITON CREAM, NF |
| MIL T 0037144 : B NOTICE 1 | THEOPHYLLINE AND GUAIFENESIN CAPSULES |
| MIL-S-37281 Revision A:1976 | SECOBARBITAL SODIUM CAPSULES, USP |
| MIL-B-37451 Base Document:1976 | BENZALKONIUM CHLORIDE SOLUTION, USP |
| MIL-A-37571 Revision A:1978 | ALUMINUM HYDROXIDE GEL, DRIED, MAGNESIUM HYDROXIDE AND SIMETHICONE TABLETS |
| MIL-S-6180 Revision B:1964 | SWAGING TOOLS, FLEXIBLE CABLE TERMINAL, HAND-OPERATED |
| MIL-F-37601 Base Document:1976 | FLUOROURACIL CREAM, USP |
| MIL-H-37428 Base Document:1976 | HYDROCORTISONE CREAM, USP |
| MIL-E-37256 Base Document:1975 | ERYTHROMYCIN TABLETS |
| MIL-T-6736 Revision B:1965 | TUBING, CHROME MOLYBDENUM 4130 STEEL, SEAMLESS, AIRCRAFT QUALITY [ASG] |
| MIL-S-13985 Revision C:1983 | SODIUM HYDROSULFITE, ANHYDROUS, TECHNICAL |
| QQ-T-425 Revision B:1976 | TINPLATE, ELECTROLYTIC |
| MIL-D-26124 Revision B:1977 | DUCT AND DUCT ASSEMBLY, PNEUMATIC, FLEXIBLE |
| MIL P 18148 : C | PLUG, ELECTRIC, AIRCRAFT STORAGE BATTERY |
| MIL-S-81977 Base Document:1974 | Simulater, Radar Signal SM-697/UPQ-5 |
| MIL-S-1820 Revision G:1986 | SMOCK, FOOD INSPECTORS |
| MIL-I-7084 Revision A:1988 | INDICATOR, PRESSURE, HYDRAULIC 0-4,000 PSI |
| MIL-I-27848 Revision B:1994 | INDICATOR, HORIZONTAL SITUATION AQU-4/A |
| MIL-L-85314 Revision A:1983 | LIGHT SYSTEMS, AIRCRAFT, ANTI COLLISION, STROBE, GENERAL SPECIFICATION FOR |
| MIL-D-51091 Revision J:1986 | DECONTAMINATING APPARATUS, POWER DRIVEN, SKID-MOUNTED, MULTIPURPOSE, NONINTEGRAL, 500-GALLON, M12A1 |
| CCC C 531 : E | CLOTH, TRACING |
| SAE ARP 4898 : 2005 | STANDS, SHIPPING AND STORAGE, AIRCRAFT ENGINES, REUSABLE |
| MIL-F-5504 Revision B:1958 | Filters and Filter Elements, Fluid Pressure, Hydraulic Micronic Type |
| MIL-E-7125 Revision A:1982 | ETHYLENE GLYCOL MONOETHYL ETHER ACETATE, TECHNICAL |
| MIL-S-37087 Base Document:1975 | SEPARATOR, SERUM AND PLASMA, 100s |
| MIL-G-25591 Revision E:1981 | Gyroscope, Rate, Switching, Type MC-1 |
| MIL-S-43910 Base Document:1974 | SPOT REMOVER (FOR REMOVAL OF OIL AND GREASE FROM CLOTHING) |
| O-E-661 Revision D:1984 | ERADICATOR, INK |
| NNN-F-240 Revision D:1976 | FLASK LABORATORY |
| GG-B-101 Revision G:1986 | BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED) |
| MIL-M-64016 Base Document:1983 | MOTOR, ROCKET, METAL PARTS FOR AND LOADING ASSEMBLY FOR DEMOLITION KIT, CRATERING M180 |
| PPP-P-2008 Base Document:1976 | PREPARATION FOR DELIVERY REQUIREMENTS FOR PARTITIONS, OFFICE, STEEL |
| MIL-B-4330 Revision C:1984 | BOOT, EXTREME COLD WEATHER |
| MIL-B-44224 Revision B:1990 | BEEF IN BARBEQUE SAUCE, THERMOSTABILIZED, TRAY PACK |
| W-C-440 Revision B:1970 | CLIP, ELECTRICAL, GENERAL SPECIFICATION FOR |
| MIL-I-2925 Revision B:1967 | INDICATOR, CARBON DIOXIDE, CHEMICAL ABSORPTION TYPE, PORTABLE |
| LLL-F-00550 Base Document:1964 | FORK AND SPOON, PICNIC (WOOD) |
| MIL-G-43196 Revision C:1987 | GLOVES, ROCKET FUEL HANDLERS |
| MIL T 0014358 : B | TELEPHONE SET TA-312()/PT |
| MIL T 25435 : B | TRANSMITTER, PRESSURE, AIRCRAFT, VARIABLE RELUCTANCE TYPE, GENERAL SPECIFICATION FOR |
| MIL-I-38258 Base Document:1965 | INDICATOR, ATTITUDE ARU 18/A DIRECTOR |
| MIL-B-83963 Revision A:1974 | BINDERS AND FILLERS, FLEXIBLE, LOOSE LEAF FLIGHT CREW CHECK LIST |
| AA-T-2753 Base Document:1991 | TABLE, FOLDING, STEEL TUBE (ADVANCE BASE) |
| MIL-B-11453 Revision A:1958 | BATTERY, STORAGE BB-401()/U |
| MIL-L-6273 Revision D:1983 | LIGHT, NAVIGATIONAL, BEACON, OBSTACLE OR CODE, TYPE G 1 |
| MIL-T-7258 Revision B:1985 | TRANSMITTER, TEMPERATURE ELECTRICAL RESISTANCE TYPE B-4 |
| MIL-P-36668 Revision B:1977 | PIPET, SEROLOGICAL, STERILE, DISPOSABLE GLASS |
| MIL-B-44249 Revision A:1988 | BREAD PUDDING, IMITATION MAPLE FLAVORED, WITH HAM, THERMOSTABILIZED, TRAY PACK |
| MIL-A-82446 Revision A:1966 | AFTERBODY TEST SET MK 486 MOD 0 (FOR TORPEDO MK 46 MOD 0/1) |
| MIL-B-18544 Revision B:1985 | BOOSTER CANS (FOR BOOSTERS MARK 8 AND MARK 12) |
| GG H 925 : 0 | HYDROMETERS, GRADUATED SCALE (FOR GENERAL LABORATORY USE) |
| MIL-T-1870 Revision J:1983 | TROUSERS, COLD WEATHER, MENS, FIELD, WOOL |
| UU B 43 : D NOTICE 1 | BAG, PAPER, WASTE-RECEPTACLE |
| MIL-T-36974 Revision A:1975 | TUBE, BLOOD COLLECTING, VACUUM, NON STERILE |
| MIL-T-36381 Base Document:1965 | TUBE, CAPILLARY, BLOOD SAMPLE, CLASS 0.8 MM INSIDE DIAMETER 90 MM LONG |
| MIL-T-22755 Revision B:1972 | TAPE, REPAIR, MAGNETIC MINESWEEPING CABLE SHEATH |
| EE-S-321 Revision F:1987 | SHORTENING COMPOUNDS AND LARD |
| MIL-A-36665 Base Document:1970 | ADAPTERS, CONDUCTIVE NEOPRENE, ENDOTRACHEAL ANESTHESIA SET |
| MIL-I-5415 Revision C:1987 | INDICATOR, AIR SPEED, PITOT STATIC PRESSURE GENERAL SPECIFICATION FOR |
| ASTM F 876 : 2017 : REDLINE | SPECIFICATION FOR CROSSLINKED POLYETHYLENE (PEX) TUBING |
| MIL-G-174 Revision B:1986 | GLASS, OPTICAL |
| L-C-110 Revision J:1958 | CELLOPHANE (COATED AND NONCOATED REGENERATED CELLULOSE FILM) |
| GG-C-1433 Revision B:1976 | CHISELS (CUTTING INSTRUMENTS), DENTAL |
| MIL R 60346 : C | ROVING, GLASS, FIBROUS (FOR PREPREG TAPE & ROVING, FILAMENT WINDINGAND PULTRUSION APPLICATIONS) |
| MIL-B-36646 Revision A:1974 | BLOOD RECIPIENT SET, WITH METERING CHAMBER, WITHOUT NEEDLE, DISPOSABLE |
| DDD-B-61 Revision E:1972 | BANDAGE, GAUZE, (ROLLER AND COMPRESSED) |
| MIL S 87966 : NOTICE 1 | SAFETY EQUIPMENT FALL ARRESTING |
| MIL-T-82575 Base Document:1971 | TEST SET, TORPEDO, MARK 281 MOD 1 |
| MIL-B-24947 Base Document:1988 | BADGE, BREAST, IDENTIFICATION (U.S. COAST GUARD) |
| MIL-B-43318 Revision A:1969 | BINDING, TEXTILE, BORE CLEANING; AND SWABS, SMALL ARMS, CLEANING |
| MIL-S-70344 Base Document:1990 | SHIM, LAMINATED - GENERAL SPECIFICATION FOR |
| MIL-R-87017 Revision B:1991 | RIBBON, POLYESTER, GROSGRAIN (CG) |
| MIL-B-44135 Revision B:1993 | BEVERAGE BASE, POWDER, ORANGE, FORTIFIED (OPERATIONAL RATION COMPONENT) |
| MIL-B-37189 Base Document:1975 | BAGS, URINE COLLECTION |
| MIL-I-3825 Revision B:1965 | INSULATING TAPE, ELECTRICAL, SELF FUSING FOR USE IN ELECTRONIC COMMUNICATIONS AND ALLIED EQUIPMENT |
| MIL-T-3351 Revision E:1990 | TRACTOR, FULL TRACKED, LOW SPEED, TRACTOR WHEELED, AGRICULTURAL AND TRACTOR WHEELED, INDUSTRIAL AND THEIR ATTACHMENTS, PACKAGING OF |
| MIL-I-631 Revision D:1961 | INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID |
| MIL-A-27671 Revision B:1965 | AMPLIFIER-INDICATOR GROUP, ALTITUDE VERTICAL SPEED A/A24G-11 |
| MIL-B-44127 Base Document:1984 | BODY ARMOR, BONNET, FOR EXPLOSIVE ORDNANCE DISPOSAL (EOD) UNITS |
| MIL P 2693 : C | PACKING MATERIAL, COLD STORAGE DOOR GASKETING, NONWATERTIGHT |
| MMM-A-182 Revision A:1967 | Adhesive, Rubber |
| MIL A 4946 : B | ANTENNA ASSEMBLY AT-197()/GR |
| MIL-L-85824 Revision A:1988 | LIFE RAFT, INFLATABLE, ONE MAN, VEE BOTTOM, LRU-18/U |
| FF-T-311 Revision E:1974 | |
| GGG-O-591 Revision F:1977 | OILER, HAND |
| MIL-A-36725 Base Document:1970 | |
| MIL-F-0051095 Revision F:1983 | FILTER MATERIAL, GAS-AEROSOL, C18R1 2 |
| MIL-A-22334 Base Document:1964 | AMPLIFIER, SYNCHRO SERVO, 6 WATT 4OO CYCLE |
| MIL-P-3631 Revision C:1981 | PARALLEL RULER (ROLLING) |
| MIL-R-24661 Base Document:1985 | RING BUOY, LIFESAVING, AUTO INFLATABLE |
| MIL-C-62279 Revision A:1965 | CHASSIS, TANK, ARMORED VEHICLE, BRIDGE LAUNCHER, M60A1, AND M48A5, PROCESSING FOR STORAGE AND SHIPMENT OF |
| GG-F-599 Revision B:1988 | FORCEPS, DRESSING, DENTAL |
| MIL-B-28536 Revision C:1989 | BUILDING, PREFABRICATED, READY CUT, METAL, RIGID FRAME, 40 X 100 FEET |
| MIL-J-43924 Revision E:1991 | JACKET, COLD WEATHER, (HIGH TEMPERATURE RESISTANT] |
| NNN C 440 : NOTICE 1 | CLAMP UTILITY LABORATORY AND HOLDER BURET CLAMP |
| MIL-H-9859 Revision A:1968 | HANDWHEEL, ORDNANCE |
| MIL-E-37007 Revision A:1975 | EMBEDDING COMPOUND, LABORATORY, PARAFFIN AND PLASTIC POLYMERS |
| MIL-L-6723 Revision C:1987 | LIGHT, AIRCRAFT, GENERAL SPECIFICATION FOR |
| SS-C-266 Revision F:1973 | CHALK, MARKING, WHITE AND COLORED |
| MIL-P-43700 Revision C:1987 | PONCHO, WET WEATHER |
| DDD-C-001559 Base Document:1969 | CARPET, LOOP, LOW PILE HEIGHT, HIGH DENSITY, WOVEN OR TUFTED WITH ATTACHED CUSHIONING |
| MIL G 6019 : C | GAGE, PRESSURE, DIAL INDICATING, LOW-PRESSURE OXYGEN |
| SAE AMS A 21180 : 2017 | ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH |
| GG-C-611 Revision C:1975 | COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING, BACTERIOLOGICAL |
| MIL-T-43779 Revision C:1988 | TIMER, DELAY, RELEASE, CARGO PARACHUTE, M1 AND M2 |
| MIL-C-62053 Revision D:1985 | CARRIER, GUIDED MISSILE EQUIPMENT M730 AND M730A1 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL G 24211 : 0 | GASKET, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| MIL-B-36392 Base Document:1965 | BAR, ORTHOPAEDIC FRAME, TURNTABLE |
| HH-I-538 Revision B:1964 | INSULATION, ELECTRICAL, PASTED-MICA |
| TT-S-00227 Revision E:1969 | SEALING COMPOUND, ELASTOMERIC TYPE, MULTICOMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL-B-21902 Revision A:1963 | |
| MIL-S-22224 Base Document:1959 | SENSITIVITY SWITCH MARK 5 MOD 1 |
| MIL-P-11570 Revision C:1984 | PYROMETERS, INDICATING, THERMOCOUPLES |
| MIL-O-81375 Revision B:1983 | Oral Inflation Assemblies, Survival Equipment, Inflatable |
| MIL C 62291 : A | CHASSIS, WEAPON, FULL TRACKED, F12253500 PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-13626 Revision B:1976 | TELEPHONE SET TA-1()/PT |
| DDD E 00940 : A | EYELET REINFORCEMENT, GUMMED, CLOTH |
| MIL-C-10082 Revision C:1964 | CANISTER, PARTICULATE, M14 |
| MIL-A-44264 Base Document:1986 | ADAPTER KIT, M-1 CAP; FOR CANTEEN, WATER, INSULATED |
| MIL C 8073 : D | CORE MATERIAL, PLASTIC HONEYCOMB, LAMINATED CLASS FABRIC BASE, FOR AIRCRAFT STRUCTURAL AND ELECTRONIC APPLICATIONS |
| MIL-T-10372 Revision A:1965 | TAPE, TEXTILE 1 INCH |
| MIL-S-51547 Base Document:1989 | SMOKE POT, HC, M1, COMPONENTS FOR |
| DD S 750 : A | STOPPER, LABORATORY APPARATUS, TAPER-GROUND |
| MIL-C-3648 Base Document:1951 | CLAMP, TEST TUBE |
| MIL-C-17564 Base Document:1953 | CLOTH, HOLLAND |
| MIL-C-13600 Revision A:1962 | CUPRIC OXIDE, TECHNICAL |
| MIL-P-63315 Base Document:1979 | PRESSURE CARTRIDGE PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| MIL-P-3583 Base Document:1951 | PLATE, EGG INSPECTION [ALUMINUM] |
| MIL-F-35081 Revision E:1984 | FAT, HYDROGENATED, VEGETABLE |
| MIL C 22567 : B | CARTRIDGE DELAY MARK 16, MOD0 |
| MIL-S-18533 Revision A:1976 | SHELL BLANKS, STEEL, HIGH-TENSILE (TORPEDOES) |
| GG-T-750 Base Document:1958 | TUBE, DUODENAL, SURGICAL, (REHFUSS) |
| MIL-M-63038 Revision D:1993 | MANUAL. TECHNICAL, ORGANIZATION OR AVIATION UNIT, DIRECT SUPPORT OR AVIATION INTERMEDIATE, AND GENERAL SUPPORT MAINTENANCE |
| MIL I 22344 : D | INSULATION, PIPE, THERMAL, FIBROUS GLASS |
| MIL-S-2607 Revision A:1952 | SAMPLER, BUTTER LARD MEAT |
| MIL-D-60448 Base Document:1968 | DETONATOR, ELECTRIC M78, PARTS AND LOADING, ASSEMBLING, AND PACKING |
| AA-P-560 Revision A:1966 | POINTER, LECTURE |
| GG P 00146 : D | PEN SET, DESK |
| MIL-B-45530 Revision A:1988 | BOOSTER, AMMUNITION, ELECTRIC, CALIBER .50 |
| GG-B-001294 Base Document:1967 | BURNISHER, RENTAL |
| MIL-P-36709 Base Document:1970 | PAPER, GLASSINE, WEIGHING |
| MIL-L-52413 Revision B:1990 | LIFE PRESERVER, YOKE, ORAL INFLATION, TRAPPED AIR TYPE, DESIGN 9008 |
| MIL-S-85318 Base Document:1979 | SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS |
| MIL-B-43711 Base Document:1970 | BARRIER MATERIAL, WATERPROOF, FLEXIBLE; LUMBER PROTECTIVE |
| GGG-T-661 Revision B:1966 | TRAMMELS AND TRAMMEL POINTS |
| MIL-B-8976 Base Document:1969 | BEARINGS, PLAIN, SELF-ALIGNING, ALL METAL |
| MIL-C-87975 Base Document:1985 | CLOCK, AIRCRAFT, MECHANICAL ABU-32/A |
| MIL-B-14036 Revision E:1992 | BRACKET, OUTBOARD MOTOR: BOW ATTACHMENT; 12-TON PNEUMATIC HALF FLOAT |
| MIL-F-50022 Base Document:1959 | FACEBLANK (FOR CD V-805 MASK) |
| MIL-Q-378 Revision B:1963 | QUICKMATCH |
| MIL-A-14053 Revision C:1977 | Antenna AT-450( )/ARC |
| MIL-C-43033 Base Document:1961 | CLOTH, COTTON, WATER REPELLANT |
| GGG-B-001222 Base Document:1967 | BIT, SCREWDRIVER (AND ADAPTER, SCREWDRIVER BIT) |
| GG-S-1343 Revision A:1975 | STERILIZER, SURGICAL INSTRUMENT AND SUPPLY MECHANICAL AIR REMOVAL, NONPORTABLE (HEAT AND MOISTURE STABLE) |
| MIL-C-22845 Revision A:1968 | CARTRIDGE, RELAY, MARK 35 MOD O |
| MIL-C-22625 Base Document:1960 | CARTRIDGE, DUMPER VALVE, MARK 22 MOD O |
| UU-P-221 Revision B:1972 | PAPER, DIRECT POSITIVE SENSITIZED (DIAZOTYPE) |
| MIL-S-47147 Base Document:1974 | SEAL, RUBBER EXTRUSIONS, NON CELLULAR |
| MIL-M-70605 Base Document:1988 | 2,2'-METHYLENEBIS (4-METHYL-6-TERT-BUTYLPHENOL) |
| QQ-C-571 Revision B:1974 | COPPER, PHOSPHOR (ALLOYING ADDITIVE) |
| MIL-S-52159 Revision C:1994 | SLING, MULTIPLE LEG .625 INCH BY 6-FOOT CHAIN, WITH SPECIAL HOOKS AND RING |
| GGG-T-0040 Revision A Interim Revision:1965 | TAMPERS, HAND |
| MIL-F-37141 Base Document:1975 | FUROSEMIDE INJECTION, USP |
| MIL-C-47127 Revision A:1983 | CLOTH, POLYESTER FABRIC, CHLOROSULFONATED POLYETHYLENE COATED, FLAME RESISTANT |
| MIL B 2427 : G | BOX, AMMUNITION PACKING, WOOD, NAILED |
| MIL-C-51276 Base Document:1967 | CHEMICAL AGENT, TRIPHOSGENE |
| MIL-C-19311 Revision B:1973 | COPPER CHROMIUM ALLOY FORGINGS, WROUGHT ROD, BAR AND STRIP (COPPER ALLOY NUMBERS 182, 184, AND 185) |
| LLL-C-251 Revision A:1969 | CHARCOAL, WOOD |
| MIL-J-38349 Revision B:1973 | JACKET, PARARESCUE SUIT CWU-14/P |
| MIL-F-0013785 Revision B:1969 | FILTER MATERIAL |
| QQ-B-750 Base Document:1961 | BRONZE, PHOSPHOR, BAR, PLATE, ROD, SHEET, STRIP, FLAT WIRE, AND STRUCTURAL AND SPECIAL SHAPED SECTIONS |
| GGG-B-001013 Base Document:1967 | BIT, SCREWDRIVER (TORQ-SET) |
| MIL-B-11353 Revision D:1976 | BRIDGE, FLOATING: ALUMINUM; FOOT, PACKAGING OF |
| O-I-501 Revision B:1964 | INHIBITORS, PICKLING (FOR USE WITH SULPHURIC ACID) |
| MIL G 12297 : H | GRENADE, HAND, INCENDIARY, TH3, AN-M14 |
| MIL-F-0050073 Revision B:1967 | FACEFORM, FIELD PROTECTIVE MASK, M8 |
| GGG-C-135 Revision A:1966 | CAULKING TOOL, HAND |
| MIL-C-10015 Revision D:1982 | CHEST, TOOL KIT, EMPTY |
| MIL C 82783 : NOTICE 1 | |
| O S 00801 : D | SULFURIC ACID, ELECTROLYTE: FOR STORAGE BATTERIES |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| MIL-D-45470 Base Document:1960 | DETONATOR, ELECTRIC, T76, METAL PARTS FOR |
| MIL-P-50206 Base Document:1968 | PROPELLANT M9, FLAKE (FOR USE IN 40 MM CARTRIDGES) |
| MIL-D-18503 Base Document:1945 | Detonator MK 22 Mod 0 |
| O-S-00650 Base Document:1965 | SODIUM SULFITE, ANHYDROUS, TECHNICAL, AND SODIUM BISULFITE, ANHYDROUS, TECHNICAL, FOR WATER TREATMENT |
| MIL-I-17433 Revision C:1986 | Inhibitor, Hydrochloric Acid Descaling and Pickling Solutions |
| MIL-C-46156 Revision A:1985 | CORROSION REMOVING COMPOUND SODIUM HYDROXIDE BASE FOR IMMERSION APPLICATION |
| DOD-P-51463 Base Document:1980 | PHOSPHOROUS, RED, OILED, TECHNICAL (METRIC) |
| MIL F 52618 : D | FITTING, PIPE, ALUMINUM ALLOY (THREADED) 150 POUND, GENERAL SPECIFICATION FOR |
| MIL-B-43273 Revision B:1976 | BOX, FIBERBOARD, FOR PACKAGING AND PACKING PERSONNEL PARACHUTES AND CANOPY ASSEMBLIES |
| MIL-L-45973 Revision A:1976 | LINER MATERIAL, GREASEPROOF |
| GGG-J-51 Revision E:1967 | JACKS, MECHANICAL, HAND OPERATED (SCREW; SCISSORS; REEL; PLANER; AND RACK BAR) |
| GGG-A-145 Revision A:1965 | ADJUSTING TOOL, BRAKE SHOE (SPOON TYPE) |
| MIL I 285 : B | IMPREGNITE, UNSTABILIZED [CC2] AND STABILIZED [XXCC3] |
| MIL-L-50064 Revision C:1964 | LENSES, OPHTHALMIC, SIMPLE (FOR ABC-M17 MASK) |
| MIL-A-46166 Base Document:1973 | ARMOR: GLASS REINFORCED PLASTIC LAMINATES |
| MIL R 46116 : A | REMOVER, PAINT, SOLVENT TYPE, FOR MULTIPLE COAT AND RESISTANT SYSTEMS (INCLUDING EPOXIES) |
| MIL-B-21880 Revision D:1978 | BELT, MILITARY POLICE (WHITE) |
| MIL-P-14585 Revision A:1962 | PROJECTILE LOAD, 6 INCH 47 CALIBER, WP, MK 13 FILLING ASSEMBLY |
| MIL-S-82487 Base Document:1967 | SWITCH, SQUIB MARK 65 MOD 0 |
| MIL-B-46967 Base Document:1963 | BOMB, GAS, NONPERSISTENT, GB, 750-POUND MC-1; INERT COMPONENTS FOR |
| MIL-B-23360 Revision B:1970 | BOMB, INCENDIARY, TH3, 4-POUND, M126 |
| GGG-F-671 Revision B:1957 | FRAME, HAND HACKSAW; FRAME, JEWELER'S SAW; AND FRAME, COPING SAW |
| GG-G-590 Base Document:1961 | GONIOMETER, ORTHOPEDIC |
| MIL-S-6904 Revision B:1965 | Signal, Emergency Warning, General Specification For |
| GGG-D-698 Revision A:1963 | DRILL, RATCHET (REVERSIBLE) |
| NASA KSC SPEC P 0017 : 1994 | PROPELLANTS, RECOVERED HYDRAZINE FAMILY FUELS, SPECIFICATION FOR |
| DOD-P-85321 Base Document:1980 | PROPYLENE OXIDE (METRIC) |
| MIL P 7254 : F | PROPELLANT, NITRIC ACID |
| DOD STD 1686 : 0 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES)(METRIC) |
| MIL-A-25175 Revision C:1976 | AIR TRANSPORT, NONTACTICAL, PACKING FOR |
| JJ-H-571 Revision B:1967 | HOSE, FIRE, LINEN, UNLINED (WITH OR WITHOUT COUPLINGS) |
| MIL-A-48449 Revision A:1981 | Alignment Device, Optical, Gun Bore |
| MIL-S-46897 Revision B:1990 | SEALING COMPOUND, POLYURETHANE FOAM |
| MIL-STD-129-2 Base Document:1993 | MARKING FOR SHIPMENT & STORAGE - MEDICAL MATERIAL |
| MIL-L-22624 Revision A:1964 | LINK, AMMUNITION, 2OMM, MARK 6 MODS 4, 5 AND 6 |
| MIL-T-82825 Base Document:1989 | |
| O S 00809 : D | SULFURIC ACID, TECHNICAL |
| MIL P 82634 : 0 | PROTECTIVE CLOTHING SET, CHEMICAL AGENTS, MARK 1 MOD O |
| MIL-I-83262-3 Base Document:1977 | INDICATOR, TEMPERATURE, THERMOCOUPLE, EHU-43/A |
| MIL-C-53050 Base Document:1985 | CAMOUFLAGE KIT, GROUND LAUNCHED CRUISE MISSILE (GLCM) SYSTEM |
| MIL-P-47170 Revision A:1992 | PRIMER, SILICONE RUBBER SEALANT |
| MIL H 26666 : D (1) | HOSE ASSEMBLY, PNEUMATIC, HIGH PRESSURE |
| MIL-A-38345 Revision E:1988 | AIR CONDITIONER A/E32C-24 |
| MIL-C-27505 Revision B:1967 | Cartridge, Engine Starter MXU-4A/A |
| MIL-C-23157 Revision D:1979 | CLIPBOARD, PILOTS, MXU-163/P AND MARK 2A |
| MIL-B-63299 Revision A:1983 | BODY ASSEMBLY FOR MINE, ANTI-PERSONNEL: HE, M74 |
| MIL-I-27619 Revision G:1974 | INDICATORS, ATTITUDE DIRECTOR |
| MIL S 46188 : 0 | STEEL PLATE, WROUGHT HOMOGENEOUS ELECTROSLAG REMELT (ESR) (4340 ALLOY |
| MIL-U-44164 Revision A:1989 | UNDERSHIRT, COLD WEATHER, POLYPROPYLENE |
| MIL-P-24587 Base Document:1979 | POWER SUPPLY, UNINTERRUPTIBLE, SOLID STATE (NAVAL SHIPBOARD) |
| MIL-T-85549 Base Document:1982 | Test Program Set (TPS) - Operational Test Program Sets (OTPS) For F/A-18 Units Under Test (UUT), General Specification For |
| MIL-R-5049 Revision D:1989 | RING, WIPER, PISTON ROD |
| MIL P 9503 : B | PAINT, RUBBER, RIGID AND AIR SUPPORTED RADOME |
| MIL-C-29366 Revision B:1988 | CAP, UTILITY, CAMOUFLAGE |
| MIL-T-24940 Revision A:1993 | TROUSERS, FIREMEN'S, STRUCTURAL/ALUMINIZED PROXIMITY |
| MIL-C-5414 Revision G:1993 | COMPUTER, AIR NAVIGATION DEAD RECKONING TYPE MB 4A AND TYPE CPU 26A/P |
| MIL-B-4792 Revision E:1994 | BUMPER, RUBBER, DUPLEX ROUND |
| MIL-H-37456 Base Document:1976 | HEPARIN SODIUM INJECTION USP |
| MIL-V-85402 Base Document:1980 | VALVE, AIR, DUAL, PYROTECHNIC ACTUATED FZU-43/B |
| MIL-C-44192 Revision A:1990 | CONTAINER, SHIPPING AND STORAGE, COAT (HANGER PACK) |
| MIL-I-16103 Revision F:1983 | INDICATOR, PHASE SEQUENCE, SWITCHBOARD & PANEL |
| MIL-S-44215 Revision A:1989 | SWEATPANTS, PHYSICAL FITNESS UNIFORM (PFU) |
| MIL-C-1203 Revision C:1973 | COCKS, DRAIN, COCKS PLUG, AND COCKS, SHUTOFF, SCREW STEM |
| MIL H 87961 : NOTICE 2 | HOSE AND HOSE ASSEMBLIES, AIR DUCT, AIR BREATHING, OXYGEN SYSTEM GENERAL SPECIFICATION FOR |
| MIL-S-44212 Revision A:1989 | SWEATSHIRT, HOODED, PHYSICAL FITNESS UNIFORM (PFU) |
| MIL-C-17435 Revision C:1976 | CUSHIONING MATERIAL, FIBROUS GLASS |
| MIL-T-58082 Revision A:1974 | TESTER, PYROMETER & THERMOCOUPLE, FIELD, TYPE N-3A |
| MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
| MIL F 83670 : NOTICE 1 | FOAM-IN-PLACE PACKAGING, PROCEDURES FOR |
| VV-S-190 Base Document:1961 | SEALING COMPOUND (DIPCOAT) |
| MIL-C-24918 Revision B:1992 | COAT, ALL-WEATHER, MAN'S, WITH REMOVABLE LINER |
| PPP-C-1752 Revision D:1989 | CUSHIONING MATERIAL, PACKAGING, POLYETHYLENE FOAM |
| MIL-D-51559 Base Document:1991 | DECONTAMINATING APPARATUS: PORTABLE, 14 LITER, M13 (PRACTICE) |
| MIL-A-51313 Base Document:1952 | ARSENIC PENTOXIDE, ANALYZED REAGENT |
| MIL-G-52857 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 400 HERTZ, PU-732/M |
| MIL-P-37612 Base Document:1978 | PENICILLIN G BENZATHINE AND PENICILLIN G PROCAINE SUSPENSION STERILE |
| MIL-T-5583 Revision C:1987 | Transmitter, Position, 28 Volts DC |
| MIL-S-37486 Revision A:1976 | SODIUM CHLORIDE IRRIGATION, USP |
| MIL T 82840 : NOTICE 1 | TAPE, SILICAL CLOTH, PHENOLIC - PREIMPREGNATED |
| MIL-B-82800 Base Document:1983 | BROADGOODS, GRAPHITE CLOTH, PHENOLIC IMPREGNATED |
| MIL-T-52809 Revision A:1986 | TRUCKS, HAND, LIFT; PALLET, MANUAL-HYDRAULIC |
| MIL W 6496 : B NOTICE 1 | WINCH, DRUM, ENGINE OF TURRET HOIST, TYPE A-1 |
| NASA KSC SPEC P 0012 : 1979 | REFRACTORY CONCRETE, SPECIFICATION FOR |
| MIL-F-10336 Revision E:1977 | FIBER SHEET, VULCANIZED |
| MIL-C-2202 Revision H:1990 | COVERALLS, MENS COTTON SATEEN |
| MIL-C-87093 Revision B:1988 | COVERALLS, FLAME RESISTANT (ARAMID) |
| MIL-F-26862 Revision B:1970 | FIBERBOARD, SOLID, NON-CORROSIVE, FUNGI-RESISTANT FOR INTERIOR BLOCKING APPLICATIONS |
| MIL-F-51216 Base Document:1965 | FILTER UNIT, GAS-PARTICULATE, EMD, 600 CFM, M9A2 |
| MIL-A-55368 Base Document:1972 | AIRBORNE DATA ANNOTATION SYSTEM AN/AYA-10() |
| MIL-T-8679 Base Document:1954 | TEST REQUIREMENTS, GROUND HELICOPTER |
| MIL-M-63007 Revision A:1990 | MANUAL, TECHNICAL AND CATALOGES, SUPPLY HAND RECEIPT (DA FORM 2062) PREPARATION OF |
| QQ-P-00428 Revision C:1967 | PLATINUM FOIL (DENTAL) |
| MIL-L-10287 Revision B:1976 | LACQUER, CELLULOSE NITRATE FOR IDENTIFICATION OF SMALL ARMS AMMUNITION |
| MIL-T-37497 Base Document:1976 | TRIAMCINOLONE ACETONIDE AEROSOL,NF |
| MIL S 37436 : 0 | SODIUM BICARBONATE TABLETS, USP |
| MIL C 37862 : 0 | CINNAMON OIL, USP |
| MIL-P-37747 Base Document:1972 | PENICILLIN V POTASSIUM FOR ORAL SOLUTION, USP |
| MIL-S-37807 Revision A:1978 | SULFUR, SALICYLIC ACID AND POLYETHYLENE CREAM |
| MIL-B-37655 Base Document:1976 | BARIUM SULFATE FOR SUSPENSION, USP, DISPOSABLE ENEMA UNIT |
| MIL-P-37496 Base Document:1976 | PHENYLEPHRINE HYDROCHLORIDE NASAL SOLUTION, USP |
| MIL-T-37705 Base Document:1978 | TEST STRIPS AND COLOR CHART, GLUCOSE IN BLOOD |
| O-E-760 Revision D:1987 | ETHYL ALCOHOL (ETHANOL), DENATURED ALCOHOL, PROPRIETARY SOLVENTS & SPECIAL INDUSTRIAL SOLVENTS |
| MIL-A-37493 Revision A:1978 | AMITRIPTYLINE HYDROCHLORIDE TABLETS, USP |
| MIL-L-19844 Revision A:1963 | LEAD; SHIELDED, DETACHABLE IGNITION |
| MIL-V-37682 Base Document:1978 | VITAMIN E TABLETS |
| MIL-B-37701 Revision A:1977 | BETHANECHOL CHLORIDE TABLETS, NF |
| MIL-G-52773 Revision A:1977 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 60KW 50/60 HERTZ PU-650B/G |
| MIL-K-37394 Revision A:1977 | KANAMYCIN SULFATE CAPSULES USP |
| MIL-I-37326 Revision A:1976 | IDOXURIDINE AND POLYVINYL ALCOHOL OPHTHALMIC SOLUTION |
| MIL-P-37269 Revision A:1976 | PHENYLEPHRINE HYDROCHLORIDE OPHTHALMIC SOLUTION USP VISCOUS |
| MIL-C-83435 Base Document:1974 | CLOTHING OUTFIT, EXTREME COLD WEATHER SURVIVAL A/P22S-10 |
| MIL B 81391 : NOTICE 1 | BAG, WATERVAPORPROOF, ONE FACE TRANSPARENT, FOR INTERIOR PACKAGING |
| MIL-G-22665 Base Document:1960 | GENERATOR SET, STEAM TURBINE, 15OO KW, 45O VOLT, 6O CYCLE, AC |
| MIL-S-17980 Revision D:1973 | SEA MARKER PACKET, INFLATABLE SURVIVAL EQUIPMENT |
| MIL-T-81490 Revision A:1991 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| UU-C-1387 Revision B:1976 | CAP, FOOD HANDLERS, PAPER, WHITE, ADJUSTABLE |
| MIL-C-85392 Base Document:1987 | CONTROL MONITOR SET, GUIDED WEAPON, AN/AWW-7D, GENERAL SPECIFICATION FOR |
| MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
| MIL G 21480 : A | GENERATOR SYSTEM, 400 HERTZ ALTERNATING CURRENT, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-B-37743 Base Document:1978 | BENZTROPINE MESYLATE TABLETS, USP |
| MIL-S-71076 Base Document:1993 | SERVOVALVE ASSEMBLY, AZIMUTH: 12561758 |
| MIL I 27851 : B | INDICATOR, INDICATED AIRSPEED AVU-17/A |
| MIL B 0044426 : 1991 | BOOTS, INTERMEDIATE COLD/WET |
| MIL E 37259 : 0 | ETHYNODIOL DIACETATE AND MESTRANOL TABLETS |
| MIL-M-37830 Base Document:1978 | MULTIVITAMIN AND SODIUM FLUORIDE SOLUTION |
| MIL-D-37177 Base Document:1975 | DESONIDE CREAM |
| MIL-D-37621 Base Document:1977 | DIGOXIN TABLETS, USP |
| MIL-A-37412 Revision A:1977 | ACETAMINOPHEN AND CODEINE PHOSPHATE TABLETS |
| MIL-P-63462 Base Document:1979 | Plastic Molding and Extrusion Material, Ethyl Cellulose, for Rocket Grain Inhibiting Materials |
| O-A-491 Revision E:1967 | AMMONIUM CHLORIDE, TECHNICAL |
| MIL P 37535 : NOTICE 2 | PROPOXYPHENE HYDROCHLORIDE CAPSULES, USP |
| MIL-P-37477 Base Document:1976 | PROCAINAMIDE HYDROCHLORIDE CAPSULES, USP |
| MIL-T-25307 Revision D:1985 | TRANSMITTER, PRESSURE, HYDRAULIC, TYPE MJ-1 |
| MIL-I-25437 Revision B:1984 | INDICATORS, AIRCRAFT, PRESSURE, VOLTAGE RATIO TYPE, GENERAL SPECIFICATION FOR |
| MIL-T-52965 Base Document:1979 | TOPOGRAPHIC SUPPORT SYSTEM (TSS), DIRECT SUPPORT SECTION, TRUCK MOUNTED |
| PPP-C-186 Revision C:1976 | CONTAINER, PACKAGING AND PACKING FOR DRUGS, CHEMICALS, AND PHARMACEUTICALS |
| MIL I 2819 : E | INSULATION BLOCK THERMAL |
| MIL-C-0050007 Revision C:1973 | CHUTE, CONTAMINATED CLOTHING, M1 |
| MIL-D-37651 Base Document:1977 | |
| MIL-A-36763 Revision A:1974 | ANESTHESIA SET, SPINAL, DISPOSABLE |
| MIL-C-37304 Base Document:1975 | CHLORZOXAZONE AND ACETAMINOPHEN TABLETS |
| MIL-T-49269 Base Document:1984 | TEST SET, RADIO, AN/PRM-34 |
| MIL-T-12424 Revision D:1968 | TEST SET, ELECTRON TUBE TV-7 ()/U |
| GG-P-681 Revision D:1980 | PROTRACTOR, CIRCULAR AND SEMICIRCULAR, (MILS, DEGREES) |
| MIL-N-3399 Revision B:1962 | 2-Nitrodiphenylamine |
| MIL-B-44275 Revision A:1992 | BAKERY MIXES, PREPARED |
| MIL-P-12965 Base Document:1953 | POWER SUPPLY (RECTIFIER POWER UNIT RA-61) AND MOUNTING FT-414 |
| DD-T-710 Base Document:1957 | TUBE, CONNECTING, LABORATORY GLASSWARE AND CONNECTOR, ELASTIC TUBING, BRANCHED |
| MIL C 18266 : A | CORD, P/O 87B/U |
| MIL-H-44098 Revision A:1990 | Headband, Ground Troops\' - Parachutists\' Helmet (No S/S Document) |
| MIL C 3650 : A | CONNECTOR, COAXIAL, RADIO FREQUENCY, SERIES LC |
| MIL-U-43262 Revision D:1988 | UNDERSHIRTS, COLD WEATHER, MEN'S |
| MIL-B-0036470 Revision A:1967 | BASKET, PIPET, PLASTIC |
| MIL-C-12999 Revision B:1967 | CHEST, HYMN BOOK |
| MIL-T-8249 Revision B:1979 | TRANSMITTER, RATE OF FLOW, FUEL, TYPE MB-2 |
| MIL-I-85365 Revision A:1982 | IGNITER MARK 296 MODS (LOADED ASSEMBLY) |
| MIL-L-51131 Revision A:1974 | LITHIUM STEARATE |
| MIL-B-48169 Base Document:1974 | BAG, DYE, PROPELLANT AND BASE CHARGE, FOR ANTI-PERSONNEL ARTILLERY PROJECTILES |
| MIL-I-51498 Base Document:1984 | ISOPROPYLAMINE, TECHNICAL |
| MIL-I-7075 Revision A:1965 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, MULTIFUNCTION -50 DEGREES TO +50 DEGREES C 2 INCH SIZE |
| HHH-C-575 Revision E:1987 | COFFEE, INSTANT |
| MIL-T-4782 Revision C:1972 | TRANSPARENCIES, TECHNICAL TRAINING, GENERAL SPECIFICATION |
| MIL-R-17729 Revision C:1972 | RESPIRATOR OUTFIT, SUPPLIED-AIR TWO-MAN |
| ASTM C 746 : 1990 : R2003 | Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading |
| TT S 00230 : C | SEALING COMPOUND, ELASTOMERIC TYPE SINGLE COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) |
| MIL-P-6906 Revision B:1969 | PLATE, IDENTIFICATION AIRCRAFT |
| MIL B 29361 : 0 | BATTERY, STORAGE, SILVER ZINC, VENTED, GENERAL SPECIFICATION FOR |
| MIL-P-63235 Base Document:1979 | PROJECTILE, GUIDED, 155 MM, XM712, THERMAL BATTERY FOR |
| GGG-P-00788 Base Document:1964 | PULLER, MECHANICAL, WATCH AND CLOCK HAND |
| GGG-V-440 Revision A:1967 | VISE, HANDSAW, FILING; BAND SAW FILING; AND CIRCULAR SAW FILING |
| MIL S 55507 : E (2) | SHELTER, ELECTRICAL EQUIPMENT (WITH OR WITHOUT EQUIPMENT), PACKAGING OF |
| MIL-A-58066 Revision A:1966 | ALTIMETER, PRESSURE, PARACHUTIST'S |
| MIL C 19145 : B NOTICE 1 | COVERALL, WADING |
| MIL I 87108 : A | INFLATION ASSEMBLY, FLU-2A/P |
| MIL-M-55233 Base Document:1963 | MICROPHONE M-33A/A1C |
| MIL-S-81282 Revision B:1993 | STANDARD, FREE WATER DETECTOR |
| MIL-B-3108 Revision K:1990 | BAG, CLOTHING, WATERPROOF |
| MIL-H-85478 Revision A:1982 | Handle, Beaded, Inflation Assembly |
| MIL-B-16166 Revision B:1972 | BRONZE, ALUMINUM, FORGINGS, HEAT TREATED |
| GGG A 00147 : 0 | ADJUSTING TOOL, VALVE TAPPET |
| MIL-I-8974 Revision A:1981 | INDICATOR, EVENT COUNTING, GENERAL SPECIFICATION FOR |
| P-C-436 Revision E:1986 | CLEANING COMPOUND, ALKALI, BOILING VAT (SOAK) OR HYDROSTEAM |
| MIL-B-17910 Revision D:1990 | BUCKLE, BRASS: FOR BELT, COAT, MAN'S |
| MIL-T-51023 Revision D:1967 | TABLETS, COMPOUND 34 |
| MIL-A-11928 Revision B:1960 | AXLE-RL-27( ) (FOR LAYING FIELD WIRE) |
| EE-P-002152 Revision A:1985 | APPLE DESSERT, TRAY PACK |
| MIL-M-43120 Revision D:1988 | MAINTENANCE KIT, ROCKET FUEL HANDLERS CLOTHING (RESIN MODIFIED BUTYL RUBBER COATED) |
| TT-I-533 Revision B:1975 | INK, DRAWING, WATERPROOF, BLACK (FOR USE ON WATER REPELLENT AND PLASTIC DRAFTING SURFACES) |
| MIL-B-37246 Base Document:1975 | BRACE, BIT, BONE, CRANIAL, HUDSON, AND BURS, DRILL, AND EXTENSION |
| MIL-B-21518 Revision A:1961 | BELLOWS ASSEMBLY, FLEXIBLE, FOR LAUNCHING SYSTEM, MISSILE MARK 17 MODS 0, 1, 2 AND 3 |
| MIL-L-11075 Revision G:1988 | LOOPS, STRAP FASTENER |
| MIL-P-46094 Base Document:1965 | PLASTIC FILLER COMPOUND, EPOXY FOR HONEYCOMB PANELS |
| MIL-T-52015 Revision B:1976 | TEMPLATE DRAFTING, MAP SYMBOL, FOR PLASTIC SCRIBING |
| GG-C-1213 Revision A:1977 | CURETTE, EAR, BILLEAU |
| MIL-B-2331 Revision D:1985 | BUCKLES, END BAR, WITH TONGUE |
| MIL-T-14605 Revision A:1967 | TRANSFORMER UNIT, GENERAL SPECIFICATION FOR |
| MIL-B-55118 Revision A:1971 | BATTERIES, STORAGE, (CELLS) VENTED, NICKEL CADMIUM |
| MIL-A-43326 Revision A:1983 | ALTAR, PORTABLE |
| CCC-P-91 Revision C:1973 | PADDING; RUBBERIZED, CURLED HAIR |
| GG-R-60 Revision C:1965 | RAZORS, SAFETY; AND BLADES, RAZOR |
| MIL-F-43986 Revision A:1980 | FOLDER FILE, EQUIPMENT RECORD |
| AA-B-450 Revision B:1974 | BLACKBOARD, PORTABLE |
| GG-P-00181 Revision D:1993 | PENHOLDERS, WRITING |
| MIL G 38227 : A | GLOVE, SHELLS, FLYER'S |
| MIL-B-43515 Revision A:1977 | BELT, MAN'S, WAIST, BLUE 334 (ARMY BAND UNIFORM) |
| GG-D-1958 Base Document:1975 | DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED) |
| KK-C-300 Revision C:1969 | CHAMOIS LEATHER, SHEEPSKIN, OIL TANNED |
| MIL O 37324 : A | OXACILLIN SODIUM FOR INJECTION, USP |
| MIL-P-551 Revision E:1983 | PIPES AND ELBOWS, AIR CONDITIONING-HEATING |
| MIL T 37628 : 0 | TEST TUBE, 18 BY 116 MM POLYCARBONATE, CLEAR |
| MIL-S-51244 Revision A:1976 | SERVICE KIT, PORTABLE FLAME THROWER, RIOT CONTROL AGENT DISPERSER, M27 |
| MIL-I-20037 Revision B:1984 | INDICATORS, SIGHT, LIQUID LEVEL, DIRECT INDIRECT READING, TUBULAR GLASS PLASTIC |
| MIL-P-55624 Base Document:1971 | PROTECTOR, ELECTRICAL COMMUNICATION CIRCUITS GENERAL SPECIFICATION FOR |
| MIL-P-60034 Base Document:1964 | PRIMING ASSEMBLY DEMOLITION, M15 PARTS, LOADING, ASSEMBLY AND PACKING |
| MIL-F-0010135 Revision C:1968 | FACEBLANK, FIELD PROTECTIVE MASK |
| MIL-R-8791 Revision D:1982 | RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN |
| MIL-I-5416 Revision B:1962 | INDICATOR, INDICATED AIRSPEED 10-150 KNOTS |
| O-H-765 Revision E:1990 | HYDROCHLORIC ACID, TECHNICAL |
| MIL C 10436 : L NOTICE 1 | COMPASS, MAGNETIC UNMOUNTED, LENSATIC LUMINOUS DIAL TRITIUM ACTIVATED, INDUCTION DAMPED, 5 DEG. AND 20 MIL GRADUATIONS, WITH CARRYING CASE |
| AA-S-271 Revision D:1967 | SHELVING, STORAGE AND DISPLAY, STEEL, INTERCHANGEABLE, NUT AND BOLT TYPE |
| GG-S-176 Revision A:1960 | SCREEN, X-RAY INTENSIFYING, ROENTGENOGRAPHIC, FOR DIAGNOSTIC RADIOGRAPHY |
| L-P-1221 Revision A:1971 | PIPE AND FITTINGS, PLASTIC, RIGID (STYRENE-RUBBER, DRAIN) |
| MIL-C-43824 Revision A:1982 | CLOTH, SYNTHETIC FUR, KNITTED |
| KK-G-486 Revision E:1984 | GLOVES, WELDER'S, LEATHER GAUNTLET |
| MIL-H-11190 Revision D:1970 | HEADSET, ELECTRICAL AND HEADSET MICROPHONES |
| MIL-M-17321 Revision F:1985 | MARKER, TRAFFIC CONES |
| MIL-S-82605 Base Document:1972 | STRAP ASSEMBLY, CHIN (FOR STEEL HELMET MARK 2) |
| MIL-F-36899 Base Document:1972 | FUNNEL AND BOTTLE, ENTOMOLOGICAL, BERLESE |
| MIL-J-83472 Revision A:1981 | JACKET, COLD WEATHER, SECURITY POLICE CWU-46/P |
| TT B 848 : B | BUTYL ALCOHOL, SECONDARY (FOR USE IN ORGANIC COATINGS) |
| MIL S 28786 : B | SWITCHES, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL-C-52668 Base Document:1969 | CARTOGRAPHIC SECTION, TOPOGRAPHIC MAPPING SET, TRUCK MOUNTED PACKAGING OF |
| QQ-C-465 Revision A:1974 | COPPER ALUMINUM ALLOYS (ALUMINUM BRONZE) (COPPER ALLOY NUMBERS 606, 614, 630, AND 642), ROD, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR), SHAPES AND FORGINGS |
| MIL-V-0050010 Revision A:1969 | VALVE, ANTIBACK DRAFT, PROTECTIVE SHELTER, M2 |
| MIL-F-51068 Revision F:1986 | FILTERS, PARTICULATE (HIGH-EFFICIENCY FIRE RESISTANT) |
| MIL-G-44013 Revision C:1988 | GLOVE, HEAT PROTECTIVE |
| AA-S-130 Revision B:1991 | SCREENS, BEDSIDE, ALUMINUM |
| MIL-V-44323 Revision A:1988 | VEST, TACTICAL LOAD BEARING |
| MIL-M-38748 Revision A:1970 | MICROFICHE, FOR ENGINEERING/TECHNICAL DATA, REPORTS, STUDIES AND RELATED DATA REQUIREMENTS FOR |
| MIL-B-36819 Revision B:1973 | BOTTLE, SAFETY CAP PLASTIC, TABLET AND CAPSULE, ROUND, LIGHT-RESISTANT |
| MIL-L-43582 Revision B:1981 | Liner, Shirt, Chemical Protective (No S/S Document) |
| MIL M 10304 : E | METER, ELECTRICAL INDICATING, PANEL TYPE, RUGGEDIZED GENERAL SPECIFICATION FOR |
| MIL-A-28624 Revision B:1984 | AUGER, EARTH, PORTABLE; HAND-HELD, TWO-MAN, GASOLINE-ENGINE DRIVEN |
| MIL A 48611 : A | ADHESIVE SYSTEM, EPOXY-ELASTOMERIC, FOR GLASS TO METAL |
| MIL-B-36998 Revision B:1977 | BANDAGE, COTTON, ELASTIC RUBBER WARP THREADS |
| HH-M-391 Revision E:1976 | MITTENS, CLOTH, ASBESTOS (LEATHER REINFORCED) |
| P-C-451 Revision E:1975 | COATED ABRASIVE, CLOTH, ALUMINUM OXIDE OR SILICON CARBIDE |
| MIL-R-28975 Base Document:1971 | RAINCOAT, MANS, LIGHTWEIGHT, POLYURETHANE COATED |
| MIL-STD-1606 Revision A:1983 | TECHNICAL INFORMATION REQUIREMENTS FOR AIR LAUNCHED GUIDED MISSILE PROPOSALS |
| GG-C-0048 Revision A:1967 | CABINET, TOOTH ASSORTMENT, COMPARTMENTED |
| GG-R-1472 Revision B:1987 | RETAINER, MATRIX, DENTAL (TOFFLEMIRE) |
| MIL-A-50093 Revision A:1964 | ADAPTER, COMPRESSED AIR BREATHING APPARATUS, M4 |
| MIL-B-27044 Revision C:1968 | BOMB, PRACTICE BDU-12/B |
| TT-I-526 Revision A:1964 | INK, DRAWING, BLACK AND COLORS (FOR GLAZED PLASTIC SURFACES) |
| MIL-T-45555 Base Document:1964 | TRAINERS, TANK TURRET: GUNNERY, M26 (M48A2) AND M30A1 (M60A1); PROCESSING FOR STORAGE AND SHIPMENT OF |
| DOD-T-17412 Revision C:1978 | TEST KIT, WATER, ENGINE COOLING SYSTEMS (METRIC) |
| NASA KSC STD Z 0008 : 1996 | DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR |
| GGG-F-331 Revision B:1966 | FILE, HAND (SWISS PATTERN) |
| MIL-A-87134 Base Document:1978 | ADHESIVE, CONTACT, FOR CUSTOM FIT HELMET LINERS |
| GGG-C-746 Revision G:1979 | CUTLERY, GALLEY AND KITCHEN (CLEAVER, FORKS, KNIVES, SPATULAS, STEEL AND SERVER) |
| MIL T 26898 : B | TEST SET, AIRFIELD LIGHTING SYSTEMS, TYPE MM-1 |
| MIL-B-36274 Revision A:1973 | BURNER, GAS LABORATORY, BUNSEN, AUTOMATIC |
| MIL-D-38024 Revision B:1965 | DROGUE, PARACHUTE STATIC LINE |
| MIL-C-43391 Revision A:1973 | CONTAINER ASSEMBLY, SAMPLE AND SPECIMEN SHIPPING, BOX TYPE FOR AVIATION FUELS AND LUBRICATING OIL |
| MIL-C-36346 Base Document:1964 | COMPARATOR, VISCOSITY OIL 200 2000 SAYBOLT SECONDS |
| MIL-T-11157 Revision B:1963 | THEODOLITE, DOUBLE CENTER ML-474/GM |
| MIL-P-6278 Revision G:1983 | PARKA, EXTREME COLD WEATHER, ATTACHED HOOD N 2B |
| MIL-I-10633 Revision D:1962 | IGNITER, ROCKET, SUSPENDED M18A1 LOADING, ASSEMBLING AND PACKING |
| MIL P 20512 : D | PROJECTILE, 155 MM, SMOKE, HC BE, M116A1, LOADING ASSEMBLING AND PACKING |
| MIL-P-663 Revision A:1968 | POWDER, FUZE |
| DOD U 10866 : D | UREA, TECHNICAL (METRIC) |
| A-A-79 Revision C:1992 | DISPENSER, GUMMED TAPE (AUTOMATIC TYPE) |
| UU-B-340 Revision A:1973 | BINDER, LOOSE LEAF, FLEXIBLE PRONG |
| MIL-P-14250 Revision C:1981 | PIN, STRAIGHT, HEADED AND PIN, STRAIGHT, HEADLESS, SLOTTED TEMPLET STUD |
| MIL L 25866 : B | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU AND 1-A |
| MIL M 22661 : A NOTICE 1 | MOTOR AND TERMINALS ASSEMBLY |
| MIL M 43994 : C | MARKER, IDENTIFICATION, FIRE, CHEMICAL HAZARD, AND RESTRICTED AREA, REFLECTIVE |
| MIL-B-13466 Revision E:1988 | BRAID, TEXTILE AND LACE, VELLUM, WOVEN, TEXTILE (FOR BLUE DRESS UNIFORM) |
| MIL-P-14313 Revision D:1972 | PISTOL AND REVOLVERS, PACKAGING OF |
| MIL-C-5651 Revision D:1985 | CORD, ELASTIC, EXERCISER AND SHOCK ABSORBER FOR AERONAUTICAL USE |
| MIL-R-45306 Revision D:1991 | RADIATOR, ENGINE COOLING, INDUSTRIAL |
| MIL-C-21088 Revision D:1995 | COAT, MAN'S: WHITE; DRESS (OFFICER'S) |
| MIL-C-51077 Base Document:1962 | CALCIUM SILICATE, TECHNICAL |
| GGG-S-284 Revision B:1964 | SHEARS; PRUNING, HAND, (ONE-HAND OPERATED) |
| MIL-C-22585 Revision A:1984 | COMPUTER, PRESSURE REDUCTION, METEOROLOGICAL CP-402/UM() |
| NNN-H-001497 Base Document:1970 | HOLDER BLOOD COLLECTING TUBE |
| MIL-W-51255 Revision C:1981 | WINTERIZATION KIT, CHEMICAL BIOLOGICAL MASK, M4 |
| FF-T-1813 Base Document:1973 | TACK |
| MIL-B-55290 Base Document:1964 | BATTERY, WATER ACTIVATED BA-380 /AMQ-9 |
| MIL C 87071 : 0 | CAP, UTILITY, BLUE |
| MIL-W-36986 Revision A:1978 | WASHER, PIPET, AUTOMATIC, SIPHON TUBE TYPE |
| GGG-S-285 Revision B:1964 | SHEARS, PRUNING, HAND, (TWO-HAND OPERATED, LOPPING) |
| MIL-D-85580 Revision B:1988 | DEVICE, SAFETY AND ARMING, FUZE, DUMMY, FSU-10(D-1)/A AND DEVICE, SAFETY AND ARMING, FUZE, TRAINING, FSU-10(T-1)/A |
| MIL-C-50062 Revision D:1964 | CARRIER, FIELD PROTECTIVE MASK, M15 |
| MIL-P-52910 Revision B:1988 | PALLET, CARGO, FOR RIBBON BRIDGE TRANSPORTER |
| MIL-S-20322 Revision B:1973 | STRONTIUM NITRATE, ANHYDROUS |
| MIL G 10849 : F | GLOVE SHELLS, ELECTRICAL WORKER'S |
| MIL-W-19487 Revision A:1975 | WIRE, NICKEL BASE ALLOY, AGE HARDENABLE |
| MIL-B-1861 Revision A:1964 | BED, FOLDING, STEEL |
| GG-B-001275 Base Document:1967 | BURS, DENTAL, FINISHING |
| GGG-F-00420 Base Document:1963 | FISHING TOOL, PNEUMATIC TYPE VALVE |
| MIL F 10884 : G | FASTENERS, SNAP |
| MIL-J-12959 Revision E:1990 | JETTING SET, PORTABLE, FOR PILE-DRIVING OPERATION, PACKAGING OF |
| MIL-P-25515 Revision C:1968 | PLASTIC MATERIAL, PHENOLIC RESIN, GLASS FIBER BASE, LAMINATED |
| ZZ-P-75 Revision B:1971 | PAD, TYPEWRITER, SPONGE RUBBER |
| MIL-B-50539 Revision A:1983 | BOMB DISPENSER, CNU-80/E25 SHIPPING 7 STORAGE CONTAINER FOR |
| MIL-J-12368 Revision D:1978 | JOINT BAR, RAIL |
| MIL-C-11097 Revision B:1961 | CABLE, TELEPHONE (W-50-A) |
| MIL-D-50074 Revision D:1971 | DYE, BENZANTHRONE |
| MIL-S-23772 Base Document:1963 | SWITCH, HYDROSTATIC, MARK 63 MOD O AND MOD 1 |
| MIL W 438 : B | WIRE, PRIMER, ELECTRICAL |
| GGG-W-00647 Base Document:1966 | WRENCH, BUNG, AND WRENCH, DRAIN PLUG |
| MIL-P-85511 Revision A:1987 | PANEL ASSEMBLY, TARGET, BANNER, AERIAL TDU-32 SERIES |
| MIL S 53012 : NOTICE 2 | SUSPENSION KIT, 6 INCH HOSELINE |
| MIL-P-52284 Revision C:1992 | POST, HANDRAIL, FOOTBRIDGE |
| MIL-B-920 Revision C:1974 | BARS, BUCKING, RIVET |
| MIL-C-11071 Revision D:1983 | CLEANING MACHINE, FUEL CAN, DRUM |
| MIL T 28679 : A | TESTER, ANTIFREEZE AND BATTERY ELECTROLYTE SOLUTION |
| NNN-B-1505 Revision A:1976 | BOTTLES SCREWCAP GLASS (LABORATORY USE) |
| MIL-I-27667 Revision C:1990 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, EHU-16/A MULTIFUNCTION -70 DEGREES TO +150 DEGREES C |
| MIL-P-40619 Revision B:1991 | PLASTIC MATERIAL, CELLULAR, POLYSTYRENE (FOR BUOYANCY APPLICATIONS) |
| JJJ-B-87 Base Document:1959 | BALL, GAUZE |
| MIL-C-44009 Revision A:1982 | CHARGER, BATTERY, PP-7562/U |
| QQ C 586 : C | COPPER NICKEL ZINC ALLOY, ROD, SHAPES, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR) |
| MIL-C-14041 Revision B:1964 | CARRIER, HOSPITAL PROTECTOR HEADPIECE, M12 |
| MIL B 51322 : NOTICE 1 | BOMB, FIRE, 500 POUND BLU-11/B |
| O-T-370 Base Document:1962 | THIONYL CHLORIDE, REAGENT |
| MIL-P-19152 Revision A:1974 | PACKINGS, HYDRAULIC, HIGH PRESSURE(FOR HYDROPNEUMATIC SYSTEMS) |
| MIL-L-46496 Base Document:1961 | LEAD MONONITRORESORCINATE (LMNR) |
| MIL-B-83183 Revision B:1987 | BARRIER, AIRCRAFT ARRESTING |
| MIL-T-89306 Base Document:1995 | 1:100,000 SCALE TOPOGRAPHIC MAPS |
| GG-H-582 Base Document:1959 | HOLDER, PATIENT'S BED-TRAY CARD |
| MIL-L-40085 Revision F:1989 | LINK ASSEMBLY,TYPE IV, AIR DELIVERY |
| MIL-S-87060 Revision B:1988 | SHIRTS, UTILITY MEN'S, CHAMBRAY |
| MIL B 38634 : LATEST | BOMB, FIRE, BLU 32A B |
| MIL-D-37642 Base Document:1978 | DEXTROSE INJECTION, USP 50 PERCENT |
| MIL-E-23778 Base Document:1963 | EXPLOSIVE FITTING MARK 7 MOD O |
| MIL-A-19273 Revision B:1976 | ANTENNA AS-515A/SPG AND MX-7232/SPG-53B (RADAR ANTENNA SCANNER) |
| MIL-P-82810 Base Document:1986 | |
| MIL-A-82842 Base Document:1983 | ADHESIVE, CONDUCTIVE, LOW RESISTIVITY |
| MIL C 11090 : F (1) | CLEANING COMPOUND, DEGREASING AND DEPRESERVING SOLVENT, SELF-EMULSIFYING |
| MIL-B-22450 Revision C:1980 | BOOSTER, GUIDED MISSILE, MARK 12 MOD 0 (LOADED ASSEMBLY) |
| TT S 227 : B NOTICE 1 | SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CALKING, SEALING, & GLAZING IN BUILDING CONSTRUCTION) |
| MIL C 82624 : A | CELL, STORAGE, NICKEL-CADMIUM (FOR TALOS MISSILE) |
| MIL-P-43226 Revision A:1991 | POLYETHER CUSHIONING MATERIAL FOAM IN PLACE, FLEXIBLE |
| MIL-D-6998 Revision D:1978 | DICHLOROMETHANE, TECHNICAL |
| GG B 120 : A NOTICE 1 | BASEPLATE, DENTAL |
| MIL C 70683 : A | CHARGE DEMOLITION: 40LB CRATERING PARTS FOR AND LOADING, ASSEMBLING AND PACKING |
| GG L 110 : NOTICE 1 | LANCET, FINGER BLEEDING |
| MIL P 4846 : C | POWER SUPPLY, SILICON RECTIFIER, 28V 300 AMP OUTPUT TYPE ME 1 |
| MIL-A-53099 Base Document:1990 | ARCTIC FORWARD AREA REFUELLING EQUIPMENT (AFARE) |
| WW-T-696 Revision E:1984 | TRAPS, STEAM |
| MIL-W-6882 Revision F:1977 | WATER REPELLENT KIT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC |
| MIL-H-29115 Revision A:1979 | HOOD, CHEMICAL, PROTECTIVE |
| MIL-F-38762 Base Document:1966 | FLUORESCENT PENETRANT INSPECTION UNITS |
| MIL-V-85830 Base Document:1989 | VENTILATOR, TACTICAL, HELICOPTER AIRCREWMEN, CHEMICAL, BIOLOGICAL, RADIOLOGICAL PROTECTIVE |
| MIL-DTL-438 Revision C:2010 | WIRE; PRIMER, ELECTRICAL |
| MIL C 25666 : E (1) | CONVERTER, LIQUID OXYGEN, CAPACITANCE TYPE GAGING, GENERAL SPECIFICATION FOR |
| MIL-R-47025 Revision A:1991 | RESIN, CASTING, FIRE RETARDANT, EPOXY BASE |
| PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
| L-C-780 Revision A:1965 | CURTAIN, SHOWER AND WINDOW, PLASTIC |
| MIL-C-52370 Revision A:1978 | CASE, COMPUTER SUPPLIES, CARRYING |
| AASHTO M 32M/M 32 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, PLAIN, FOR CONCRETE REINFORCEMENT |
| DOD-C-85050 Base Document:1982 | CHARGERS, BATTERY, NICKEL-CADMIUM, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL C 43415 : C | CAP, SERVICE, MILITARY POLICE, WHITE |
| MIL-A-47284 Revision A:1991 | ADHESIVE, EPOXY RESIN BASE |
| MIL-P-12808 Revision F:1991 | PLUMBING FIXTURES AND ACCESSORIES, PACKAGING OF |
| PPP-P-0015 Revision D:1970 | PACKAGING AND PACKING OF STORAGE CABINETS, WARDROBES AND CLOTHING LOCKERS, METAL |
| MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-F-53040 Base Document:1984 | FUEL PREMIX, METHANOL-WATER, FOR FUEL CELL POWERPLANTS |
| MIL-A-29521 Base Document:1988 | ANTENNA GROUP, AN/BRA-34(V), AN/BRA-34A(V), AN/BRA-34B(V) |
| MIL L 43335 : E (1) | LINER, PONCHO |
| MIL-C-206 Revision A:1962 | CELLULOSE, COTTON (FOR USE IN EXPLOSIVES) |
| MIL-L-51336 Base Document:1969 | LEAD OXIDE, RED, ANALYZED REAGENT |
| MIL-F-17057 Revision A:0196 | FELT SHEET, WOOL, COMPOUND IMPREGNATED, CHOCK PADDING |
| MIL-S-37561 Base Document:1977 | SULFANILAMIDE, ALLANTOIN, AND AMINACRINE HYDROCHLORIDE SUPPOSITORIES, VAGINAL |
| MIL-M-37692 Base Document:1977 | |
| MIL-I-81049 Revision A:1972 | INDICATOR, TEMPERATURE, ELECTRICAL RESISTANCE, VOLTAGE COMPENSATED, MULTIFUNCTION |
| MIL-DTL-32369 Base Document:2011 | CARTRIDGE, IMPULSE, CCU-167/B |
| MIL-M-46849 Base Document:1971 | MICROFILMING OF ENGINEERING AND RELATED DOCUMENTS, 16MM REQUIREMENTS FOR |
| MIL-P-46994 Revision B:1982 | PELLETS/GRANULES BORON/POTASSIUM NITRATE |
| MIL-C-17620 Revision F:1990 | Crown, Service Cap (Man\'s) (No S/S Document) |
| MIL-T-37046 Base Document:1974 | TROUSERS, OPERATING, SURGICAL, WOMEN'S, COTTON POLYESTER, STATIC RESISTANT |
| MIL-S-29415 Revision A:1988 | SWEATER, SERVICE WOOL |
| MIL-P-24764 Base Document:1991 | POWER SUPPLIES, SHIPBOARD, ELECTRONIC, GENERAL SPECIFICATION FOR |
| MIL-P-37657 Base Document:1977 | PROPANTHELINE BROMIDE TABLETS, USP |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| MIL-S-83519 Revision A:1984 | SPLICE, SHIELD TERMINATION, SOLDER STYLE, INSULATION, HEAT SHRINKABLE, ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| MIL-T-10629 Revision C:1978 | T-SQUARE [STEEL] |
| ASTM A 392 : 2011 : REV A : R2017 | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| MIL-B-36772 Base Document:1972 | BOLT, TIBIAL |
| MIL-S-24922 Base Document:1985 | SWEATER, MAN'S (FLAME RETARDANT) |
| MIL-D-37464 Base Document:1976 | DEHYDROCHOLIC ACID TABLETS, NF |
| FFF-D-191 Revision D:1975 | |
| MIL-T-37422 Revision A:1977 | TETRACAINE HYDROCHLORIDE OPHTHALMIC SOLUTION USP |
| MIL C 0028830 : A | CABLE, RADIO FREQUENCY, COAXIAL, SEMIRIGID, CORRUGATED OUTER CONDUCTOR, GENERAL SPECIFICATION FOR |
| MIL-S-7420 Revision B:1958 | STEEL BARS, ALLOY, CHROMIUM HIGH CARBON E 52100 [AIRCRAFT QUALITY] |
| ASTM B 250/B250M : 2016 : REDLINE | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
| MIL G 22529 : B NOTICE 1 | GROMMET, PLASTIC |
| MIL-T-52877 Revision B:1980 | Transmission Group Data: Transmitter, Data: T-1257/FSS-9(V) and Receiver, Data: R-1861/FSS-9(V) |
| MIL T 55103 : A NOTICE 1 | SPECIFICATION FOR TEST SET, ELECTRICAL POWER AN/UPM-93() |
| MIL I 27190 : B | INDICATOR, PRESSURE AGU-3/A, HYDRAULIC, 0-4,000 PSI |
| ASTM B 164 : 2003 : R2014 | Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire |
| GGG-T-00563 Revision B:1967 | TOOLS, BLACKSMITH'S (CHISELS, FLATTERS, PULLERS, HARDIES, BOLT HEADING TOOLS, PUNCHES, AND SWAGES) |
| MIL-G-52622 Revision B:1978 | GENERATOR SET, GASOLINE ENGINE TRAILER MOUNTED, 5KW 60 HERTZ PU-631/G |
| MIL-T-49110 Base Document:1977 | TELEPHONE SET TA-838 ()/TT |
| MIL-T-6598 Revision F:1994 | TRANSMITTER, RATE OF FLOW, FUEL, SYNCHRO STYLE TYPE J 6A |
| MIL-T-49117 Base Document:1977 | TEST SET, RECEIVER TS-3565( )/TRS-2 |
| MIL-I-26299 Revision G:1990 | INDICATORS, RATE OF FLOW, 0-5,000 PPH, INTEGRALLY LIGHTED |
| MIL-M-55554 Revision A:1969 | MODULE, IMAGE INTENSIFIER 25 MILLIMETER, TYPE 8585 |
| MIL V 25961 : F | VALVE, FILL-BUILDUP-VENT, LIQUID OXYGEN CONVERTER, CRU-5O/A |
| MIL-A-14295 Revision C:1985 | ALIGNMENT EQUIPMENT, WHEEL, FOR MILITARY WHEELED VEHICLES |
| MIL-F-37389 Base Document:1975 | FERROUS SULFATE ORAL SOLUTION USP |
| MIL M 50075 : A | METANIL YELLOW, REAGENT |
| MIL-D-85465 Revision B:1988 | DEVICE, SAFETY AND ARMING, FUZE FSU-10/A |
| MIL K 20277 : H | KNIFE, COMBAT AND SHEATH |
| MIL-L-10114 Revision A:1958 | LENS, CYLINDRICAL, LAMINATED 3-PLY (FOR PROTECTIVE MASKS) |
| MIL-B-44230 Revision B:1990 | BEEF CHUNKS WITH GRAVY, THERMOSTABILIZED, TRAY PACK |
| MIL-A-202 Revision C:1981 | ANTHRACENE, TECHNICAL (METRIC) |
| MIL-R-51279 Revision C:1973 | RESUSCITATION TUBE, CHEMICAL BIOLOGICAL MASK, M1 |
| DD-M-00200 Revision B:1970 | MEDICINE GLASS |
| MIL-H-36266 Revision A:1966 | HYDROMETER, GRADUATED SCALE API GRAVITY |
| MIL-B-20289 Revision D:1990 | BUTTONS, INSIGNIA, PLASTIC |
| DDD R 00310 : (1) | RIBBON, TIME STAMP |
| MIL M 17191 : D | MOUNT, RESILIENT, PORTSMOUTH BONDED SPOOL TYPE |
| MIL-H-29144 Revision B:1985 | HOOD, FIREMANS,ALUMINIZED, PROXIMITY |
| ZZ-G-401 Revision B:1970 | GLOVES, RUBBER (FOR) ELECTRICAL WORKERS (FOR USE IN CONNECTION WITH APPARATUS OR CIRCUITS NOT EXCEEDING 5,000 VOLTS TO GROUND) |
| MIL-T-55369 Base Document:1972 | TEST SET, RADIO TS-1588 ( ) /AC |
| MIL-C-49085 Base Document:1976 | CHARGER, BATTERY PP-7311/PAS-7 |
| MIL-B-2378 Revision H:1980 | BAG, BARRACKS |
| GG-I-550 Revision B:1974 | INKING PAD, OFFICE TYPE NUMBERING MACHINE |
| GG-C-1320 Revision B:1985 | CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM) |
| MIL-A-7021 Revision C:1974 | ASBESTOS SHEET, COMPRESSED, FOR FUEL, LUBRICANT, COOLANT, WATER AND HIGH TEMPERATURE RESISTANT GASKETS |
| MIL-R-10882 Revision D:1969 | RECORDED, RADIOSONDE AN/TMQ-5 (UNITS OF) |
| MIL-B-2424 Revision D:1983 | BLOCK AND TACKLE: WITH LOAD LOCKING DEVICE |
| MIL-S-5733 Revision B:1952 | SOLENOID, FUSE ARMING, TYPE F AND 1 |
| MIL L 60634 : NOTICE 1 | LANYARD, SAFETY ASSEMBLY |
| MIL T 44427 : 1991 | TENT, FIVE SOLDIER CREW |
| ASTM C 875 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Conduit |
| MIL-B-36929 Base Document:1972 | BOTTLE, URINE, SPECIMEN |
| H-B-401 Revision C:1964 | BRUSHES, MUCILAGE AND PASTE |
| MIL-T-36815 Revision D:1976 | TUBE, BIOLOGICAL CULTURE SAMPLING, WITH TRANSPORT MEDIA |
| MIL-R-17772 Revision C:1982 | RADIATOR, HEATING, BASEBOARD PANEL, STEAM AND HOT WATER |
| L-P-511 Base Document:1964 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC-RESIN, POST-FORMING |
| MIL-F-49183 Base Document:1978 | FILTER, DIRECTOR CURRENT, POWER F 1461 ()/VCR |
| DD-B-599 Revision A:1961 | BOTTLE, STOPPER, VACCINE, ROUND AND STOPPER, BOTTLE, RUBBER |
| MIL-B-36410 Base Document:1965 | BOX, MICROSCOPE SLIDE CHIPBOARD, 20 SLIDE |
| MIL-I-51484 Base Document:1982 | INSECTICIDE, D PHENOTHRIN (AEROSOL) |
| MIL-C-14635 Revision B:1990 | COVER, PERSONNEL IDENTIFICATION TAG |
| MIL C 70600 : (5) | CARTRIDGES, CALIBER .22 |
| MIL-S-51270 Base Document:1968 | STANNIC OXIDE, ANALYZED REAGENT |
| MIL R 10916 : D | ROD, LEVEL, GEODETIC |
| GG-G-650 Base Document:1959 | GRID, RADIOGRAPHIC, STRAIGHT, WAFER TYPE |
| MIL A 24625 : 0 | ANODES, CORROSION PREVENTIVE, PLATINUM PLATED NIOBIUM WIRE TYPE, CATHODIC PROTECTION |
| K-B-1069 Revision A:1972 | BASKET, FRAME MOUNTED |
| MIL C 0042054 : 0 | CENTRIFUGE, LABORATORY, REFRIGERATED, 120/230 VOLT, 50/60 Hz, AC |
| MIL-A-18850 Revision C:1970 | AMPLIFIER, SERVO (FOR TORPEDO MARK 37 MODS 0, 2, AND 3) |
| MIL-I-60084 Revision E:1974 | INITIATOR, BOMB FUZE, FMU-7C/B |
| BBB-S-1269 Revision B:1973 | SWEAT PANTS |
| L-T-776 Revision A:1966 | TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) |
| GG-P-725 Revision B:1978 | |
| MIL-C-52933 Base Document:1977 | CAMOUFLAGE SCREENING SYSTEMS, MODULAR LIGHTWEIGHT, SYNTHETIC SNOW |
| MIL-M-36954 Revision C:1975 | MASK, SURGICAL, DISPOSABLE |
| GGG-H-001347 Base Document:1969 | HOT LINE STICKS |
| JJ-G-451 Revision H:1984 | GLOVES, MEN'S AND WOMEN'S CLOTH, LEATHER PALM |
| DDD-B-60 Base Document:1959 | BANDAGE, GAUZE, TUBULAR |
| MIL-P-43772 Revision A:1987 | PANEL TYPE II MODULAR PLATFORM, AIRDROP |
| MIL-DTL-6279 Revision M:2003 | PARKA, EXTREME COLD WEATHER, TYPE N-3B |
| T-C-2754 Base Document:1990 | CORD, POLYESTER, CORELESS |
| GG-B-140 Revision D:1986 | BATH, WATER, DENTAL IMPRESSION COMPOUND |
| MIL-B-208 Revision D:1970 | BATTERY, STORAGE, LEAD ACID, AUTOMOTIVE AND NAVY PORTABLE (EXCEPT AIRCRAFT), PACKAGING AND PACKING OF |
| MIL-F-10969 Revision B:1969 | FILTER ELEMENT, AEROSOL |
| UU-B-40 Revision C:1973 | BAG, PAPER, SHOPPING |
| MIL L 6484 : C | LIGHT, COCKPIT UTILITY, AIRCRAFT GENERAL SPECIFICATION FOR |
| MIL-V-36845 Base Document:1972 | VISCOSIMETER, SAYBOLT, WITHOUT VISCOSITY TUBES |
| MIL R 6466 : B NOTICE 1 | RELAY, ARMATURE, EXCITER PROTECTION, TYPE A-1 |
| KKK-L-370 Revision D:1988 | LINING, FRICTION, (CLUTCH AND BRAKE, METALLIC, METAL-CERAMIC AND SEMI-METALLIC) |
| MIL-G-36805 Base Document:1971 | GRADUATE, LIQUID, LABORATORY, POLYPROPYLENE |
| MIL-C-10244 Revision G:1970 | CRYPTOGRAPHIC EQUIPMENT DESTROYER, INCENDIARY, TH4, M2A1 |
| LLL-L-51 Revision D:1985 | LADDERS, PORTABLE, WOOD: EXTENSION AND STRAIGHT |
| L P 00525 : NOTICE 1 | PLASTIC STRIP, DENTAL MATRIX |
| MIL B 83771 : A | BATTERY, REMOTELY ACTIVATED SUBMINIATURE RESERVE PRIMARY |
| MIL-I-22266 Revision C:1971 | INSULATING COMPOUND, ELECTRICAL (FOR FIELD SPLICING APPLICATIONS) |
| MIL-M-46985 Revision D:1969 | MINE, CHEMICAL AGENT, VX, M23; INERT COMPONENTS |
| UU P 675 : B INT AMD (7) | POCKET PLANNING SET |
| MIL-G-16567 Revision D:1990 | GRIP, CABLE |
| MIL P 47104 : A | POTTING COMPOUND, EPOXY RESIN, THERMOSETTING |
| MIL-T-22939 Revision B:1972 | TEST SET, TORPEDO, MARK 393 MOD O |
| GG-C-1282 Revision C:1985 | CURETTES, ALVEOLAR (MOLT AND MILLER) |
| NNN B 001522 : 0 | BOTTLE, STOPPER (NARROW AND WIDE MOUTH) |
| MIL-M-0050079 Revision E:1968 | MASK, PROTECTIVE, FIELD ABC-M17 |
| MIL-T-37193 Base Document:1975 | TUBE, BIOLOGICAL CULTURE SAMPLING |
| MIL-P-20628 Revision B:1971 | PUTTY, SEALING (FOR BOLTED STEEL STORAGE TANKS) |
| MIL-I-23208 Revision A:1962 | INDICATORS, SIGHT, LIQUID, REFRIGERANT |
| MIL L 7830 : D | LIGHT ASSEMBLY, MARKER, AIRCRAFT OBSTRUCTION |
| MIL-S-44097 Revision A:1990 | SUSPENSION ASSEMBLY, GROUND TROOPS' - PARACHITISTS' HELMET |
| MIL T 44036 : 0 | TIEDOWN ASSEMBLY, CARGO, AERIAL DELIVERY, LOAD BINDER TYPE |
| O-S-377 Revision B:1966 | SODIUM PYROPHOSPHATE, ANHYDROUS, TECHNICAL (TETRASODIUM-PYROPHOSPHATE) (S/S BY DOD-S-51517) |
| GG-C-00590 Revision B:1970 | COPYHOLDER, TYPIST'S |
| FF-H-1687 Revision A:1974 | LOCKS, OFFICE MACHINE |
| JJJ-V-002173 Revision A:1985 | CARROTS, SLICED, THERMOSTABILIZED, TRAY PACK |
| MIL-M-23346 Base Document:1964 | MOTOR FIRE CONNECTOR ASSEMBLY |
| NNN-F-001141 Base Document:1965 | FLASK, SAYBOLT, VISCOSITY |
| MIL-B-44294 Revision A:1989 | BEEF STEW, THERMOSTABILIZED, TRAY PACK |
| MIL-D-52838 Base Document:1974 | DIVING EQUIPMENT SETS, PACKAGING OF |
| MIL-P-87133 Base Document:1978 | PLOTTER, COMBAT MISSION PLU-6/C (AIR NAVIGATION) |
| MIL-E-6719 Revision A:1972 | ELBOW; ELECTRICAL CONDUIT |
| MIL-C-85283 Revision B:1994 | CONTROL MONITOR SET, GUIDED WEAPON, AN/AWW-9 |
| MIL I 25860 : A | INDICATOR, RATE OF FLOW EFU-1/A, 0-6,000-24,000 PPH, 2-INCH, INTEGRALLY LIGHTED |
| MIL F 15160/28 : A NOTICE 1 | FUSE, STYLE F28 |
| NNN-B-788 Revision A:0196 | BULB DROPPING PIPETTE |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
| MIL-M-14274 Revision A:1975 | MULTIPLIER, ELECTRICAL INSTRUMENT TS-265/UP |
| GG-S-590 Revision B:1976 | SPATULA, DENTAL, CEMENT |
| MIL-D-10132 Revision C:1964 | DISC, VALVE |
| ASTM F 1183 : 1996 : R2017 | Standard Specification for Aluminum Alloy Chain Link Fence Fabric |
| DDD-P-50 Base Document:1959 | PAD, COTTON, DRESSING, EYE PAD |
| MIL-I-42044 Revision A:1991 | SEXUAL ASSAULT DETERMINATION KIT |
| MIL F 6939 : B NOTICE 1 | FLUX, ALUMINUM AND ALUMINUM ALLOY GAS WELDING |
| MIL-T-5955 Revision C:1970 | TRANSMISSION SYSTEM, VTOL-STOL GENERAL REQUIREMENTS FOR |
| MIL C 15345 : G | CASTING, NONFERROUS, CENTRIFUGAL |
| MIL S 13925 : A | SHELL, MORTAR, 4.2-INCH, M2, M2 ALTERNATE, M2A1, AND M2A1 ALTERNATE; HT LOADING ASSEMBLY |
| GGG-S-665 Revision C:1963 | STRIPPER, CABLE, HAND, AND STRIPPER, WIRE, HAND |
| MIL-C-36417 Base Document:1965 | CELL, SALINITY INDICATOR |
| MIL C 25531 : D | COUPLING HALF, QUICK DISCONNECT, PNEUMATIC STARTER, EXTERNAL, LOW PRESSURE, DIRECT RELEASE |
| GGG-D-651 Revision D:1964 | DRILL, BREAST |
| MIL-A-28844 Revision A:1986 | ANTIWETTING COMPOUND 3-HEPT |
| MIL-A-44255 Revision B:1991 | APPLE DESSERT, THERMOSTABILIZED, TRAY PACK |
| MIL-DTL-83420 Revision P:2017 | WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
| MIL-R-24169 Revision B:1982 | REGULATOR, AIR DEMAND, SINGLE HOSE, DIVER 5 |
| GG-H-216 Revision C:1976 | HEMACYTOMETER SET |
| MIL-B-30510 Revision B:1983 | BLOCK AND TACKLE SET, LINEMAN'S, WITH SNUBBING HOOK |
| MIL D 36471 : NOTICE 1 | DISK, COLOR STANDARD, ANTI ICING ADDITIVE |
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| MIL-S-85064 Base Document:1977 | SIGNAL, UNDERWATER SOUND, MARK 82 MOD O AND MARK 128 MOD 1 |
| MIL-B-36964 Revision B:1973 | BLANKET, COMBAT, CASUALTY LIGHTWEIGHT, WATERPROOF, ALUMINIZED PLASTIC |
| PPP P 001946 : NOTICE 1 | PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE |
| MIL-C-50709 Base Document:1971 | COPPER BASE SINTERED BARS (OIL PREGNATED) |
| MIL E 6060 : D | ENVELOPE, PACKAGING WATER VAPOR PROOF, FLEXIBLE |
| MIL-H-81324 Base Document:1966 | HONING MACHINE, DRY PORTABLE |
| ASTM F 2807 : 2013 : R2018 | Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications (Withdrawn 2024) |
| MIL E 24127 : 0 | EDUCTORS; GASOLINE, OIL, OR WATER |
| MIL D 23689 : 0 | DETONATOR, DELAY, MARK 8O MOD O |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL-M-81385 Revision A:1967 | Manifold Stem Assemblies, Life Preserver |
| MIL C 87147 : 0 | OUTLINES VACUUM PACKAGED ACCESSORIES FOR THE SRU-6/P overcoat. |
| MIL-T-43560 Revision A:1972 | TESTER, SPRING RESILIENCY |
| MIL D 81248 : B | DETECTOR PAD, FREE WATER |
| MIL-B-21160 Base Document:1957 | BLADDERS, FLOTATION, MK 2 MOD 0 AND MK 2 MOD 1 |
| L-T-790 Revision B:1976 | TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE) |
| MIL-A-3777 Revision A:1958 | ANCHOR, GUY AND RODS, ANCHOR |
| MIL-T-6302 Revision B:1964 | TRANSMITTER, PRESSURE, FUEL 0-600 PSI |
| MIL-C-228 Revision A:1952 | CIRCLE, AZIMUTH, AND CIRCLES, BEARING |
| MIL-D-36425 Revision B:1978 | DISH, CULTURE, PETRI, TOP AND BOTTOM COMPLETE, DISPOSABLE 100`S |
| MIL C 25955 : 0 | CONNECTOR, ELECTRICAL, ENVIRONMENT RESISTING MINIATURE, WITH SNAP-IN CONTACTS |
| MIL-B-52371 Revision A:1971 | BINOCULARS, ELECTRONIC AN/PAS-5 |
| DDD-C-628 Revision F:1981 | COVER, MATTRESS |
| GG-L-00410 Base Document:1964 | LINE GUIDE, LETTERING, ADJUSTABLE |
| MIL-P-4640 Revision A:1957 | PLASTIC FILM, POLYETHYLENE, FOR BALLOON USE |
| MIL-C-27212 Revision B:1970 | CABLE, POWER, ELECTRICAL, AIRPORT LIGHTING CONTROL |
| MIL-M-18808 Base Document:1955 | MICROPHONE MARK 10 MOD 0 |
| MIL-C-10405 Revision A:1954 | CRYSTAL UNITS, QUARTZ, PRESSURE AND SPACER MOUNTED, GENERAL SPECIFICATION FOR |
| MIL-C-47121 Base Document:1974 | COMPOUND, SEALING, POLYSULFIDE RUBBER |
| MIL-T-11372 Revision F:1991 | TRIVET, SURVEYING INSTRUMENT |
| QQ-W-470 Revision B:1965 | WIRE, STEEL, CARBON, SPRING, MUSIC. |
| MIL-M-9105 Revision D:1971 | Mitten, Inserts (Gloves, Air Crew, Mitten Style, Leather, Type N-2) (No S/S Document) |
| MIL-T-4638 Revision B:1985 | TESTERS, MATERIAL HARDNESS (ROCKWELL TYPE) |
| MIL-C-21067 Revision C:1992 | COATING COMPOUND, SYNTHETIC RUBBER, FOR EXPOSED STEEL SURFACES |
| MIL-B-25820 Revision B:1967 | BOMB, LOADING PRACTICE BDU-6/E AND BDU-35/E |
| MIL I 83361 : (4) | INDICATOR, PRESSURE OIL, DUAL EGU-18/A, 0-100 PSI |
| MIL-B-8621 Revision A:1964 | Board, Chart, Mark 6A, Mark 6B and Mark 6C |
| MIL C 87218 : (1) | CABLE, LOCKCLAD, FOR AIRCRAFT CONTROL |
| MIL-DTL-38804 Revision E:2017 | MANUALS, TECHNICAL - TIME COMPLIANCE TECHNICAL ORDERS (TCTO) AND TCTO SUPPLEMENTS |
| MIL-S-3629 Revision F:1981 | STEREOSCOPES, LENS, AERIAL PHOTOGRAPH INTERPRETATION [POCKET] |
| MIL-W-1366 Revision F:1975 | WINDOWS, OPTICAL SENSOR |
| GGG-H-506 Revision D:1962 | HOE, MATTOCKS, AND PICK |
| KKK-T-728 Revision A:1973 | TRUCK, HAND, TWO-WHEELED (LIGHT DUTY) 300 POUND CAPACITY |
| MIL E 25670 : A NOTICE 1 | GENERAL SPECIFICATION FOR EARPHONE ELEMENTS |
| MIL-D-23140 Revision D:1992 | DRAWINGS, INSTALLATION CONTROL, FOR SHIPBOARD ELECTRONIC EQUIPMENT |
| O-T-620 Revision C:1967 | TRICHLOROETHANE-1,1,1, TECHNICAL, INHIBITED (METHYL CHLOROFORM) |
| MIL-F-14136 Revision B:1959 | FILTER, BANDPASS (FILTER KITS MK&123) (TRC, MK&124) (/TRC, MK&228) (GRC AND MK&236)/GRC UNITS OF |
| MIL-R-52002 Revision A:1971 | RACK ASSEMBLY, CONE, AIRPORT MARKER LIGHT |
| MIL-P-16406 Revision A:1974 | PAINT, BLACK, HIGH GLOSS, QUICK DRYING |
| MIL C 85570 : B (1) | CLEANING COMPOUND, AIRCRAFT, EXTERIOR |
| MIL-G-5485 Revision D:1993 | GLASS; LAMINATED, FLAT, BULLET RESISTANT |
| MIL T 82833 : NOTICE 1 | TUNGSTEN, THORIATED, TWO PERCENT, FORGED & CUPPED |
| MIL-G-82814 Base Document:0198 | GRAPHITE REINFORCEMENT |
| MIL-Z-85500 Base Document:1981 | ZIRCONIUM CARBIDE |
| MIL-T-37047 Revision A:1974 | TEST TUBE, 17 BY 100 MM., POLYPROPYLENE, DISPOSABLE, WITH SNAP-ON CAP |
| MIL-S-1186 Revision B:1961 | SALINOMETER EQUIPMENT, EVAPORATOR, SHIPBOARD USE |
| MIL-W-21425 Revision B:1975 | Wire, Steel, High Carbon, Square, Uncoated, For Mechanical Springs (General Purpose) |
| MIL V 8622 : B | VALVE, HIGH-PRESSURE, OXYGEN-CYLINDER AUTOMATIC OPENING |
| MIL-P-36728 Revision B:1976 | PAPER, FILTER AND LENS, 4X6 INCH 12S |
| MIL-B-82117 Revision D:1983 | BATTERY, STORAGE, SILVER-ZINC, RECHARGEABLE, GENERAL SPECIFICATION |
| MIL-C-5191 Revision B:1953 | COMPUTER AND TRANSMITTER, TRUE AIRSPEED PITOT STATIC, TYPE A-2 |
| GG S 776 : C | STRAIGHTEDGE, STEEL, DRAFTSMEN |
| MIL-Z-21353 Base Document:1959 | ZIRCONIUM HYDRIDE |
| MIL-I-17276 Revision A:1971 | INHIBITOR, CELLULOSE ACETATE, EXTRUDED |
| GG-S-1344 Revision A:0197 | STERILIZER, ETHYLENE OXIDE GAS, FOR HEAT- AND MOISTURE-LABILE SURGICAL INSTRUMENTS AND SUPPLIES (NONPORTABLE) |
| MIL-V-29591 Base Document:1992 | VISOR ASSEMBLY, AVIATOR'S SEVEN WAVELENGTH LASER PROTECTIVE, GENERAL SPECIFICATION FOR |
| MIL-P-38136 Revision A:1969 | PITOT STATIC TUBE COMPENSATED TRU 62/A |
| MIL-F-37956 Base Document:1984 | FILTER ELEMENT, AGENT SAMPLING EXTRACTOR |
| MIL-P-52307 Revision B:1992 | PLOTTER, RECTANGULAR COORDINATES (COORDINATOGRAPH) |
| MIL-F-284 Revision E:1973 | FORK, KNIFE AND SPOON, FIELD MESS |
| DD-D-431 Revision D:1977 | DISH, BIOLOGICAL STAINING, WITH TRAY |
| GG-E-651 Revision C:1975 | ERASER, BLACKBOARD |
| MIL-R-36922 Base Document:1972 | RACK, TEST TUBE, LABORATORY, WASSERMAN |
| KKK-A-2809 Base Document:1986 | AUGER, EARTH, TRUCK MOUNTED, 4 BY 4, DIESEL ENGINE DRIVEN, 28,000 LB MINIMUM GVW, WITH POLE SETTER AND WIRE REEL |
| MIL-P-37495 Base Document:1976 | PREDNISOLONE ACETATE OPHTHALMIC SUSPENSION |
| BB-F-1421 Revision B:1982 | FLUOROCARBON REFRIGERANTS |
| MIL-A-47089 Base Document:1974 | ADHESIVE, METAL FILLED, CONDUCTIVE, ELECTRICAL AND THERMAL |
| MIL-B-44228 Revision B:1993 | BEEF STRIPS WITH GREEN PEPPERS AND GRAVY, THERMOSTABILIZED, TRAY PACK |
| MIL-T-10794 Revision G:1982 | TUBE, ALUMINUM ALLOY, EXTRUDED PIPELINE SECTION, WITH GROOVED NIPPLE WELDED ON EACH END |
| MIL-D-13684 Revision D:1969 | Detonator, Electric, M48 Parts for Loading, Assembling and Packing |
| MIL-B-37690 Revision A:1977 | BETAMETHASONE SODIUM PHOSPHATE AND BETAMETHASONE ACETATE SUSPENSION, STERILE, NF |
| EE-M-101 Revision J:1979 | MATCHES, SAFETY AND MATCHES, NONSAFETY (STRIKE ANYWHERE) |
| MIL M 5388 : B | MACHMETER; PITOT STATIC OPERATED, RANGE 0.5 TO 1.5, TYPE A-2B |
| MIL T 14757 : NOTICE 1 | TRICHLOROTRIFLUOROETHANE (FOR USE IN AMMUNITION) |
| MIL-T-16315 Revision D:1994 | TRANSFORMER, POWER, STEP DOWN (MISCELLANEOUS, NAVAL SHIPBOARD USE) (NAVY) |
| MIL-P-46184 Base Document:1982 | PLASTIC MOLDING & EXTRUSION MATERIAL, POLYETHERIMIDE (PEI) |
| MIL-A-82516 Base Document:1967 | |
| MIL F 85899 : 0 | FUEL GELLING MIXTURE |
| MIL-A-159 Revision D:1972 | ANTIMONY SULFIDE (FOR USE IN AMMUNITION) |
| MIL-A-175 Revision C:1983 | AMMONIUM NITRATE, TECHNICAL (METRIC) |
| MIL-S-18732 Revision D:1968 | Steel Bars, Wire, Forging Stock, Forgings Tubing (431), Special Quality |
| MIL R 85725 : 0 | RACK, INTEGRATED AVIONICS, FORCED AIR COOLED, GENERAL SPECIFICATION FOR |
| MIL-C-14460 Revision C:1981 | CORROSION REMOVING COMPOUND, SODIUM HYDROXIDE BASE, FOR ELECTROLYTIC OF IMMERSION APPLICATION. |
| GG-S-125 Base Document:1961 | SAW, PLASTER-CAST, ENGEL |
| MIL-R-24243 Revision C:1987 | RIVET, BLIND, NON-STRUCTURAL, RETAINED MANDREL, GENERAL SPECIFICATION FOR |
| MIL-L-5567 Revision F:1983 | LIFE RAFTS, INFLATABLE 4 AND 7 MAN FOR AIRCRAFT USE |
| ASTM A 617/A617M : 1996 | SPECIFICATION FOR AXLE-STEEL DEFORMED AND PLAIN BARS FOR CONCRETE REINFORCEMENT |
| MIL-D-64026 Revision A:1990 | DISPENSER AND MINE, GROUND PRACTICE FOR M136 SYSTEM |
| ASTM C 1448/C1448M : 2005 : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
| GGG-M-125-10 Revision A:1982 | RESPIRATOR ASSEMBLY: HELMET WITH POWERED AIR-PURIFYING UNIT |
| MIL-A-13374 Revision E:1983 | ADHESIVE, DEXTRIN, FOR USE IN AMMUNITION CONTAINERS |
| GG-F-001189 Base Document:1971 | FOUNTAIN PEN, TECHNICAL |
| MIL C 82189 : B | COAT, MAN'S: FULL DRESS, U.S. MARINE BAND, OFFICER'S |
| MIL-C-28962 Base Document:1970 | CAPE, MANS, U.S. MARINE CORPS BAND |
| GEIA CMB6-4:1991(S2014) | CONFIGURATION CONTROL |
| MIL P 23653 : C | PLASTIC TILES, VIBRATION DAMPING |
| MIL P 14458 : A NOTICE 1 | PAINT, RUBBER, RED FUMING NITRIC ACID RESISTANT |
| MIL-L-5024 Revision A:1965 | LUBRICANT, INNER TUBE, AIRCRAFT TIRE |
| UU-P-680 Revision A:1964 | PORTFOLIO, DOUBLE-POCKET, PRESENTATION |
| MIL G 18498 : C | GLASS SET, WATER GAGE, FLAT, PLAIN. HIGH PRESSURE STEAM (GLASS, MICA SHIELD, SPACERS, & GASKETS) |
| GGG-M-125-8 Revision B:1985 | RESPIRATOR ASSEMBLY: HALF MASK, AIR-PURIFYING PARTICULATE-FILTER (FOR DUSTS AND MISTS) |
| MIL-A-45597 Revision A:1984 | ANALYZER, ENGINE, ELECTRONIC, CONSOLE-TYPE |
| MIL-R-82290 Revision C:1979 | RAINCOAT, MAN'S (ENLISTED) |
| FF-T-791 Revision B:1967 | TURNBUCKLE |
| GGG-D-777 Revision B:1966 | DRIVER, PROJECTILE UNIT, POWDER ACTUATED (HIGH VELOCITY) (ABOVE WATER ONLY); PIN, DRIVE, POWDER ACTUATED; AND CARTRIDGE, POWDER ACTUATED TOOL |
| MIL-DTL-81944 Revision C:1997 | TRAILER, MUNITIONS, SMALL (MHU-126 A/M) |
| MIL-G-18694 Revision A:1975 | GLYCERIN-WATER MIXTURES (FOR HYDRAULIC BUFFERS AND RECOILS) |
| DOD-PRF-24648 Base Document:1985 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| MIL-STD-611 Revision A:1974 | ELEMENTS EXCEPT ACS |
| HH-G-450 Revision D:1972 | GLOVES, CLOTH (ASBESTOS) |
| MIL H 19253 : C NOTICE 1 | HOOD, HOIST |
| MIL N 244 : A | |
| MIL F 17655 : C NOTICE 1 | FIELD CHANGES AND FIELD CHANGE KITS, GENERAL SPECIFICATION FOR |
| A-A-50379 Base Document:1990 | MITTEN SHELLS, MEN'S |
| GGG-L-1763 Base Document:1974 | LABELING MACHINES |
| RR-P-586 Revision A:1958 | POT, MELTING, (NONELECTRIC, SOLDER STYLE) |
| MIL-C-3659 Revision A:1968 | CRUCIBLE, FILTERING, LABORATORY, GOOCH, LOW FORM, FRITTED 30 M1 |
| DOD-G-51510 Base Document:1985 | GOGGLES, INDUSTRIAL, EYECUP AND LENSES, GOGGLES, INDUSTRIAL (METRIC) |
| MIL-R-11050 Revision B:1969 | RECTIFIER, METALLIC, SELENIUM |
| MIL-A-37515 Revision A:1978 | AMINOPHYLLINE TABLETS, USP |
| MIL-P-37384 Revision A:1977 | |
| MIL-C-538 Revision F:1975 | COMPARATOR, COLOR |
| L-P-389 Revision A:1964 | PLASTIC MOLDING MATERIAL, FEP FLUOROCARBON, MOLDING AND EXTRUSION |
| MIL C 51507 : C NOTICE 3 | CANISTER AND COMPONENTS, M825 |
| MIL-A-52839 Base Document:1975 | ALARM SET, ANTI-INTRUSION, RESTRICTED AREA: MINISID 3, AN/GSQ-154 |
| MIL-C-23760 Revision D:1983 | COATING, SPRAYABLE, STRIPPABLE, PROTECTIVE, FOR PACKAGING OF WEAPONS SYSTEMS AND COMPONENTS: APPLICATION OF |
| MIL-PRF-32269 Base Document:2007 | Perforated Homogeneous Steel Armor |
| GGG-P-00477 Revision A:1967 | PLIER, SLIP JOINT (LINE CLAMP) |
| GG B 00511 : A | BURNER OUTFIT, GAS, DENTAL LABORATORY |
| MIL-C-21583 Base Document:1958 | CS MECHANISM MARK 1 MODS 3, 4, 9 AND 11 |
| MIL-B-20292 Revision A:1967 | BLANKS, ROTATING BAND, FOR PROJECTILES |
| GGG-D-296 Revision B:1968 | DIE, THREADCUTTING AND RETHREADING, COLLET, THREADING DIE; AND DIESTOCK (BOLT AND SCREW THREADING, UNIFIED, AMERICAN NATIONAL AND METRIC FORM THREADS) |
| MIL W 3717 : B | WEIGHT, SOUNDING |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL S 870 : B | STEEL CASTING, MOLYBDENUM ALLOY |
| MIL-V-0050067 Revision D:1970 | VOICEMITTER-OUTLET VALVE, C29R1, COMPONENTS FOR |
| MIL-M-63036 Revision D:1991 | MANUALS, TECHNICAL: OPERATOR'S, PREPARATION OF |
| MIL-G-8170 Revision D:1987 | GAGE, OIL PRESSURE, DIRECT INDICATING, SINGLE CLAMP MOUNTED 0 -200 PSI 320 DEGREE SCALE 2 INCH SIZE, TYPE AGU 12/A AND AGU 13/A |
| IEC TS 62668-1:2016 | Process management for avionics - Counterfeit prevention - Part 1: Avoiding the use of counterfeit, fraudulent and recycled electronic components |
| MIL-C-29424 Revision A:1990 | COAT, MAN'S: POLYESTER/WOOL, GABARDINE, GREEN (WITH BELT) |
| MIL-I-60008 Revision B:1991 | IGNITER, INTEGRAL M56 |
| BB-A-106 Revision D:2010 | ACETYLENE, TECHNICAL, DISSOLVED |
| MIL-HDBK-284-1 Base Document:1992 | INTERACTIVE COURSEWARE (ICW) FOR MILITARY TRAINING, MANAGERS GUIDE FOR DEVELOPMENT, ACQUISITION & MANAGEMENT OF |
| MIL-C-19087 Revision A:1970 | CONTACTOR (FOR TORPEDO MARK 37 MODS 0, 2 AND 3) |
| MIL-B-22353 Revision D:1988 | BATCHING PLANT, AGGREGATE, (WHEEL-MOUNTED, 3O-TON CAPACITY) |
| MIL DTL 46709 : F | HOWITZER, MEDIUM, SELF-PROPELLED: 155-MM, M109A2, M109A3, M109A4, AND M109A5; PROCESSING FOR STORAGE AND SHIPMENT OF |
| MIL-T-81821 Base Document:1969 | TRAINERS, MAINTENANCE, EQUIPMENT AND SERVICES GENERAL SPECIFICATION FOR |
| MIL C 83522 : D | CONNECTORS, FIBER OPTIC, SINGLE TERMINUS, GENERAL SPECIFICATION FOR |
| MIL-T-87039 Revision B:1985 | TROUSERS, MEN'S (UNDRESS) |
| MIL P 4879 : B NOTICE 1 | POWER SUPPLY METALLIC RECTIFIER 6-12 VOLT 500-250 AMPERE OUTPUT TYPE K AND 1 |
| MIL-STD-834 Revision C:1974 | PACKAGING DATA FORMS, INSTRUCTIONS FOR PREPARATION AND USE OF |
| ZZ-T-831 Revision D:1978 | TUBING, RUBBER AND PLASTIC |
| MIL-L-24942 Revision A:1993 | LINER, FIREMAN'S TROUSER, QUILTED |
| MIL-A-37852 Base Document:1978 | AZATHIOPRINE TABLETS, USP |
| MIL-O-37733 Base Document:1977 | OXYCODONE HYDROCHLORIDE, ASPIRIN, CAFFEINE OXYCODONE TEREPHTHALATE, AND PHENACETIN TABLETS |
| MIL-G-52524 Revision C:1985 | GENERATOR SET, GASOLINE ENGINE, TRAILER MOUNTED 3KW 60 HERTZ PU-617/M' |
| MIL-S-43993 Revision C:1988 | SWEATBAND, HEADWEAR, ARTIFICIAL LEATHER |
| ASTM A 220/A220M : 1999 : R2009 | Standard Specification for Pearlitic Malleable Iron |
| MIL-P-44087 Revision B:1989 | PARKA, NIGHT CAMOUFLAGE, DESERT |
| MIL-A-85434 Revision A:1983 | AMPLIFIER, TRAVELING WAVE TUBE AM-6937/DLQ-3B |
| MIL-P-44406 Base Document:1990 | POUCHES, PLASTIC FILM |
| MIL P 83825 : 0 | PANEL ASSY, AUTOMATIC POWER TRANSFER FOR MB-TEEN AND EMU SERIES DIESEL ENGINE GENERATOR SETS |
| MIL-C-41833 Revision E:1990 | COVERALL, MECHANIC'S COLD WEATHER |
| MIL-B-29407 Revision A:1990 | BELT: ALL WEATHER, COAT, MEN'S |
| MIL-O-81144 Revision B:1970 | OSCILLATOR SUBASSEMBLY (NOSC DWG NO. 1563731)(TORPEDO MARK 37 MODS O AND 1) |
| MIL-T-37613 Base Document:1977 | |
| MIL-S-52330 Revision E:1993 | SHOP EQUIPMENT, ELECTRICAL REPAIR, SEMITRAILER MOUNTED |
| MIL-C-28793 Base Document:1973 | CABLE, ELECTRICAL, SPECIAL PURPOSE, SHIP AND SHORE USE |
| DOD-G-85733 Base Document:1986 | GREASE, HIGH TEMPERATURE, CATAPULT SYSTEM |
| MIL-C-7079 Revision A:1965 | CIRCUIT BREAKERS, NON TRIP-FREE GENERAL SPECIFICATION FOR |
| DDD-G-148 Revision D:1964 | GAUZE, ABSORBENT, STERILE AND GAUZE, ABSORBENT, IODOFORM IMPREGNATED (PACKING STRIPS) |
| MIL-T-43694 Base Document:1970 | TIEDOWN ASSEMBLIES, FLOOR ANCHORING |
| MIL-C-5545 Revision C:1983 | CORROSION PREVENTIVE, AIRCRAFT ENGINE, HEAVY OIL TYPE |
| MIL-D-52842 Revision A:1981 | DRIER, X-RAY, FILM FORCED AIR, WALL MOUNTED |
| MIL L 27546 : D | LINER, FLYER'S, JACKET AND LINER, FLYER'S, TROUSERS, CWU-9/P |
| MIL S 20633 : C | SIGNS AND MARKER, ALUMINUM: MINED AREA MARKING |
| MIL-M-6270 Revision C:1983 | MITTEN INSERTS, AIRCREW, WOOL, HEAVY TYPE N-3B |
| MIL-I-24063 Revision B:1982 | Insert Sets, Sound Isolation for Risic RISIC-1 Flexible Connectors |
| ASTM C 223 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Siding |
| MIL-B-24155 Revision B:1986 | BOILER SCALE REMOVING COMPOUND |
| MIL V 81722 : A | VALVE, INFLATION, LIFE RAFT, FLU-6/P |
| MIL-B-20148 Revision D:1987 | BRAZING SHEET, ALUMINUM ALLOY |
| MIL-C-82811 Base Document:1989 | COMPOUND, MOLD RELEASE, LIQUID |
| MIL-P-52894 Revision B:1985 | POWER PLANT, ELECTRIC, DIESEL ENGINE, TRAILER MOUNTED 5 KW, 60 HERTZ, AN/MJQ-16 |
| MIL-S-37681 Revision A:1977 | SUCCINYLCHOLINE CHLORIDE, STERILE USP |
| MIL-H-7938 Revision A:1983 | HOSE, RUBBER, FLAME-RESISTANT |
| MIL-C-17671 Revision F:1989 | CANISTER, OXYGEN BREATHING APPARATUS, FOR TYPE A-4 |
| MIL-P-710 Revision F:1990 | PUMP, DEEP WELL, PACKAGING OF |
| MIL-T-50611 Base Document:1970 | TRINITRORESORCINOL (STYPHNIC ACID) |
| MIL P 82637 : 0 | PROTECTIVE CLOTHING SET, TOXICOLOGICAL AGENTS AND PROPELLANTS |
| MIL-G-52856 Revision A:1979 | GENERATOR SET, DIESEL ENGINE, TRAILER MOUNTED 15 KW, 50/60 HERTZ, PU-405 A/M |
| MIL-C-82297 Revision B:1980 | COVERALLS, ARC PREVENTIVE |
| QQ-L-171 Revision E:1966 | LEAD PIG |
| SAE MA 2007A : 2015 | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, LIGHTWEIGHT, 204 DEGREE C, 21000 KPA HYDRAULIC, METRIC |
| MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
| MIL-T-37275 Revision A:1976 | TRIAMCINOLONE HEXACETONIDE SUSPENSION, STERILE, USP |
| MIL-C-37372 Revision A:1975 | CEFAZOLIN SODIUM, STERILE, USP LYOPHILIZED |
| MIL-I-37542 Base Document:1977 | IOPHENDYLATE INJECTION USP |
| KKK-T-1725 Base Document:1972 | TRUCK, HAND, BOX AND TUB TYPE |
| SAE AS 5778 : 1997 | COVERS, AIRCRAFT COMPONENTS, GENERAL REQUIREMENTS FOR |
| MIL-T-47066 Base Document:1974 | TITANIUM DIOXIDE, REAGENT GRADE |
| MIL-H-639 Revision D:1986 | HOOK [FOR BELTS, STRAPS, AND EQUIPAGE ITEMS] |
| MIL R 3390 : F | RINGS, DEE |
| MIL-B-36170 Revision A:1970 | BRUSH, POLISHING, DENTAL HANDPIECE (RIGHT ANGLE) |
| HHH-C-571 Revision F:1985 | COFFEE |
| MIL-STD-1424 Base Document:1979 | HYDROGEN ION METERS |
| MIL-B-82623 Base Document:1973 | BATTERY, STORAGE, NICKEL CADMIUM (FOR TALOS MISSILE) |
| MIL-I-45607 Revision C:1987 | Inspection Equipment, Acquisition, Maintenance and Disposition of |
| MIL-G-16748 Revision A:1953 | GAGE, TANK LIQUID LEVEL (STATIC-HEAD) |
| SAE AS 13572 : 2014 | SPRINGS, HELICAL, COMPRESSION AND EXTENSION |
| MIL-V-29601 Base Document:1994 | Vest, Survival, CMU-30/P22P-15 |
| J-C-96 Revision A:1971 | CABLE, TELEPHONE (W-108-B) |
| MIL-B-83369 Base Document:1972 | BORON FILAMENT REINFORCEMENT, CONTINUOUS, EPOXY RESIN IMPREGNATED |
| ASTM A 1085 : 2013 | Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS) |
| MIL-Z-50976 Base Document:1971 | ZIRCONIUM SPONGE |
| MIL V 11201 : E | VALVE, SAFETY RELIEF, ANGLE, BRASS OR BRONZE, EXTRA-HEAVY, FOR GASOLINE SERVICE |
| MIL-M-87029 Revision B:1985 | MITTENS, DIVERS FOR MK 12 SURFACE SUPPORTED DIVING SYSTEM |
| MIL-DTL-43335 Revision G:2000 | LINER, WET WEATHER PONCHO |
| MIL-P-29609 Base Document:1995 | POLYIMIDE RETAINER MATERIAL, POROUS NON-METALLIC |
| MIL-C-53071 Base Document:1987 | COUPLING ASSEMBLIES, QUICK-DISCONNECT, SEXLESS TYPE |
| MIL-S-2869 Revision B:1986 | SEALING COMPOUND, SYNTHETIC RUBBER, HOSE COVER REPAIR |
| MIL-S-7886 Revision B:1962 | SPARK PLUG, SHIELDED, AIRCRAFT RECIPROCATING ENGINE, GENERAL SPECIFICATION FOR |
| MIL-A-27391 Revision B:1963 | ALTIMETER, PRESSURE AAU-2A |
| MIL-C-12813 Revision B:1993 | CRYSTAL UNITS, QUARTZ, WIRE-MOUNTED, METAL PLATED |
| MIL-V-13497 Revision A:1962 | VARNISH, IMPREGNATING, ELECTRICAL-INSULATING (FOR FIRE CONTROL INSTRUMENTS) |
| SAE AMS T 81915 : 2016 | TITANIUM AND TITANIUM-ALLOY CASTINGS, INVESTMENT |
| HH-T-1782 Base Document:1973 | TAPE, ASBESTOS |
| MIL-P-8793 Revision A:1961 | PAINT, [GLOSS AND NONSPECULAR] FOR USE ON ELASTOMERIC PIGMENTED FILM [ASG] |
| A-A-50720 Base Document:1988 | VACUUM GAGE, PORTABLE |
| MIL-PRF-1 Revision N:2011 | ELECTRON TUBES - GENERAL SPECIFICATION FOR |
| MIL A 47059 : 0 | ACETYL TRIETHYL CITRATE |
| MIL-S-29130 Revision A:1978 | SHORTS, MENS, POLYESTER/COTTON |
| MIL P 16617 : B NOTICE 1 | PLASTIC, THERMOSETTING, PULP-FILLED PREFORMS |
| MIL-C-70785 Base Document:1989 | CARTRIDGE, 25MM, TARGET PRACTICE TRACER (TP-T) M793 REFERENCE |
| MIL-STD-1905 Revision A:1992 | DESIGN AND TEST REQUIREMENTS FOR LEVEL B AND LEVEL C AMMUNITION PACKAGING |
| MIL-E-82578 Base Document:1973 | ENCODER, SHAFT ANGLE POSITION, CYCLIC DECIMAL CODED (FOR TORPEDO TEST SET MARK 281 MOD 1) |
| MIL-V-47311 Base Document:1989 | VALVE, PNEUMATIC EXHAUST |
| TT W 549 : D NOTICE 1 | WOOD PRESERVATIVE, AMMONIACAL COPPER ARSENITE MIXTURE |
| MIL-C-23261 Base Document:1962 | COMPUTER, DITCH HEADING |
| MIL-P-17646 Base Document:1953 | POWDER, PROPELLANT (FOR AMMUNITION, 20MM) AA (GUN) |
| MIL-I-85492 Base Document:1981 | IMINE CURING/BONDING AGENT |
| MIL C 8061 : 0 | CLOTH, NYLON RASCHEL KNIT |
| MIL-P-1342 Revision A:1952 | PACKING MATERIAL [LEAD, SHREDDED] |
| MIL D 51168 : 0 | DIPHENYLGUANIDINE(1, 3-DIPHENYLGUANIDINE) |
| MIL-S-17615 Revision E:1980 | STRAP, CHIN (NAVY AND COAST GUARD) |
| MIL-F-45911 Revision A:1973 | FITTINGS, AUTOMOTIVE TUBE, SPHERICAL SLEEVE (COMPRESSION) TYPE, BRASS |
| MIL D 6054 : F | DRUM, METAL - SHIPPING AND STORAGE |
| MIL-C-38973 Base Document:1970 | CARTRIDGE, BOMB EJECTION CCU-10/B |
| MIL-W-5086 Revision C:1974 | WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY |
| MIL-PRF-24003 Base Document:1964 | Parachute Release Mechanisms; General Specification for (No S/S Document) |
| FF-T-276 Revision C:2013 | Thimbles, Rope |
| MIL-D-13383 Base Document:1954 | |
| ASTM D 2852 : 2016 : REDLINE | Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings |
| MIL-L-13802 Base Document:1954 | LACQUER, CHLORINE RESISTANT, FOR FIBER CONTAINERS |
| MIL-S-17249 Base Document:1952 | STEEL CASTING, HADFIELD MANGANESE (LOW MAGNETIC PERMEABILITY) |
| TT W 546 : D NOTICE 1 | WOOD PRESERVATIVE, ACID COPPER CHROMATE MIXTURE |
| MIL-R-55216 Base Document:1962 | RADIOSONDE TEST SET TS-1348 ( ) GMM-1 |
| DD-P-00100 Revision C:1970 | PAPERWEIGHT, GLASS |
| MIL O 23641 : NOTICE 1 | OUTLET, SHORE POWER |
| DDD-S-251 Revision D:1966 | SHADE, ROLLER, WINDOW, ROLLER, SLAT, CORD, AND ACCESSORIES |
| GG-S-001634 Base Document:1970 | SCALERS, DENTAL, SINGLE-ENDED |
| ASTM A 116 : 2011 : R2016 | Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric |
| MIL-A-83039 Revision B:1971 | AIR CONDITIONER A/M32C-10A AIR CYCLE FOR AIRCRAFT GROUND SUPPORT |
| MIL-R-47211 Revision A:1989 | RUBBER, SILICONE, ROOM TEMPERATURE CURING |
| MIL-C-58104 Revision A:1983 | COVER, PROTECTIVE FOR PARTS AND EQUIPMENT |
| MIL-N-48263 Base Document:1974 | 1-NITRO-2-PROPANOL (NPL) |
| MIL H 83776 : A | HELMET, FLYER'S, WINTER |
| MIL-G-13598 Revision A:1957 | GRENADE, RIFLE, SMOKE, M23A1, CHEMICAL LOADING ASSEMBLY |
| MIL-F-50055 Base Document:1959 | FILTER UNIT, GAS AND PARTICULATE, EMD, 600 CFM, M9 |
| AASHTO M 322M/M 322 : 2010 : R2015 | SPECIFICATION FOR RAIL-STEEL AND AXLE-STEEL DEFORMED BARS FOR CONCRETE REINFORCEMENT |
| MIL P 18817 : 0 | PRIMER, ELECTRIC, MARK 47 MOD 0 |
| MIL-C-1283 Revision F:1985 | CAN, GASOLINE, MILITARY, 5-GALLON |
| MIL-F-11150 Revision A:1961 | FILTER, PARTICULATE, 150 CFM, ABC-M9 |
| MIL-C-81452 Revision B:1972 | CABLE ASSEMBLY W-1 OF AN/AQS-13 |
| ASTM A 74 : 2017 : REDLINE | Standard Specification for Cast Iron Soil Pipe and Fittings |
| SAE AS 6852 : 1997 | SPLICE, CONDUCTOR, ELECTRIC, DISCONNECT |
| AASHTO M 225M/M 225 : 2009 : R2013 | SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT |
| SAE AS 55941 : 2013 | SWITCHES, TOGGLE, ELECTRICALLY HELD, SEALED, GENERAL SPECIFICATION FOR |
| ASTM E 786 : 1981 : R2011 | Standard Specification for Dishes, Evaporating, Platinum |
| SAE AMS R 83248 : 2005 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| ASTM A 740 : 1998 : R2014 | Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) |
| ASTM F 289 : 1996 : R2014 | Standard Specification for Molybdenum Wire and Rod for Electronic Applications |
| ASTM B 163 : 2011 : EDT 1 | Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes |
| ASTM A 809 : 2008 : R2013 | Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire |
| SAE MA 2079 : 2015 | HOSE ASSEMBLY, CONVOLUTED POLYTETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT, METRIC |
| SAE AS 23899 : 2012 | AURAL PROTECTOR, SOUND |
| ASTM A 511 : 2004 | Standard Specification for Seamless Stainless Steel Mechanical Tubing |
| SAE AS 6882 : 1999 | WATER REPELLENT, WINDOW AND WINDSHIELD, GLASS AND PLASTIC |
| SAE AS 8942 : 2014 | BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
| ASTM A 392 : 2011 : REV A | Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric |
| NAS1599:1980 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE CIRCULAR, ENVIRONMENT RESISTING, 200 DEG. C. MAXIMUM TEMPERATURE |
| SAE AMS R 81835 : 2008 | REMOVER, ORGANIC COATING, HOT TANK TYPE |
| ASTM A 500/A500M : 2018 : REDLINE | Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes |
| SAE ARP 4379 : 2016 | AEROSPACE - ACCUMULATOR, HYDRAULIC, CYLINDRICAL, PISTON SEPARATED |
| SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
| SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
| SAE AMS S 22141 : 1998 | STEEL, INVESTMENT CASTINGS - ALLOY AND CARBON |
| SAE AMS HH G 101 : 2014 | GASKET, METALLIC-ENCASED |
| SAE AS 81714 : 2014 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| ASTM A 834 : 1995 : R2006 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM A 764 : 2007 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM A 818 : 2006 : R2010 | Standard Specification for Coppered Carbon Steel Wire |
| ASTM C 1449/C1449M : 2005 : REV A : R2010 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
| ISO/IEC TR 24729-1:2008 | Information technology Radio frequency identification for item management Implementation guidelines Part 1: RFID-enabled labels and packaging supporting ISO/IEC 18000-6C |
| ASTM F 2881/F2881M : 2018 | Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications |
| ASTM C 725 : 1990 : R2003 : EDT 1 | Standard Specification for Semidense Mineral Fiber Siding |
| ASTM F 2953 : 2012 | Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages |
| ASTM C 508 : 2000 | Standard Specification for Asbestos-Cement Underdrain Pipe |
| ASTM A 220/A220M : 1999 : R2014 | Standard Specification for Pearlitic Malleable Iron |
| ASTM A 897/A897M : 2016 : REDLINE | Standard Specification for Austempered Ductile Iron Castings |
| ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
| ASTM F 1348/F1348M : 1991 : R2013 | Standard Specification for Pneumatic Rotary Descaling Machines |
| ASTM A 955/A 955M : 2018-02 | SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS-STEEL BARS FOR CONCRETE REINFORCEMENT |
| ASTM A 390:2006 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM A 764 : 2007 : R2012 | Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs |
| ASTM D 2729 : 2017 | Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings |
| ASTM C 296 : 2000 : R2004 : EDT 1 | Standard Specification for Asbestos-Cement Pressure Pipe |
| ASTM A 505 : 2016 : REDLINE | Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for |
| ASTM A 853 : 2004 : R2017 | Standard Specification for Steel Wire, Carbon, for General Use |
| ASTM F 2435 : 2015 : REDLINE | Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe |
| ASTM F 771 : 1999 | Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems |
| ASTM B 168 : 2011(R2016) | Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip |
| ASTM F 891 : 2016 : REDLINE | Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core |
| ASTM D 3309 : 1996 : REV A : R2002 | Standard Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems (Withdrawn 2010) |
| ASTM PS 7 : 1995 | Specification for Iodotrifluorome Thane CF3I (Withdrawn 1997) |
| ASTM D 2235 : 2004 | Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings |
| ASTM C 1450/C1450M : 2004 : R2014 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
| ASTM A 856/A856M : 2003 : R2009 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire |
| ASTM A 834 : 1995 : R2011 | Standard Specification for Common Requirements for Iron Castings for General Industrial Use |
| ASTM B 19 : 2015 : REDLINE | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
| ASTM B 211M : 2012 | Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric) |
| ASTM D 4514 : 2012 : REDLINE | Standard Specification for Friction Tape |
| ASTM F 1673 : 2010 : R2016 | Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems |
| ASTM A 519 : 2006 | Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing |
| ASTM F 3131 : 2014 | Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages |
| ASTM E 785 : 1981 : R1996 : EDT 1 | Standard Specification for Crucibles, Ignition, Laboratory, Metal |
| ASTM F 2806 : 2010 : EDT 1 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR) |
| ASTM F 758 : 2014 : REDLINE | Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage |
| ASTM F 859 : 2015 : REDLINE | Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type |
| ASTM B 774 : 2000 | Standard Specification for Low Melting Point Alloys |
| ASTM C 663 : 1998 : R2003 : EDT 1 | Standard Specification for Asbestos-Cement Storm Drain Pipe |
| ASTM D 2751 : 2005 | Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014) |
| ASTM F 2986 : 2012 : R2017 | Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications |
| ASTM F 2829/F2829M : 2015 : REDLINE | Standard Specification for Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pipe Systems |
| ASTM A 390 : 2006 : R2016 | Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line) |
| ASTM F 1345 : 2010 : REV A : R2015 | Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric |
| ASTM C 508/C508M : 2000 : R2015 | Standard Specification for Asbestos-Cement Underdrain Pipe (Withdrawn 2021) |
| ASTM C 223 : 1998 | Standard Specification for Asbestos-Cement Siding |
| ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| ASTM A 910/A910M : 2018 : REDLINE | Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete |
| ASTM A 491 : 2011 | Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric |
| ASTM E 454 : 2012 : R2016 | Standard Specification for Industrial Perforated Plate and Screens (Square Opening Series) |
| ASTM F 2968/F2968M : 2014 | Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications |
| ASTM F 794 : 2003 : R2009 | Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| PREN 6052 : 200P1 | AEROSPACE SERIES - RIVETS - COLLAR - SYSTEM IN ALUMINIUM ALLOY SHEAR TYPE INCH SERIES - TECHNICAL SPECIFICATION |
| ANSI MH10.8.2 : 1995 | DATA IDENTIFIER & APPLICATION IDENTIFIER STANDARD |
| IMO IH210 : 2010 SUPP 2012 | IMDG CODE SUPPLEMENT |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| ANSI X12.3 : 1997 | DATA ELEMENT DICTIONARY |
| MIL-STD-2073-1 Revision E:2008 | STANDARD PRACTICE FOR MILITARY PACKAGING |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| MIL-PRF-61002 Revision B:2008 | Labels, Pressure-Sensitive Adhesive, for Bar Coding |
| ISO/IEC 15416:2016 | Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols |
| ASTM D 996 : 2016 : REDLINE | Standard Terminology of Packaging and Distribution Environments |
| ISO/IEC 16388:2007 | Information technology — Automatic identification and data capture techniques — Code 39 bar code symbology specification |
| ASTM D 5445 : 2015 : REDLINE | Standard Practice for Pictorial Markings for Handling of Goods |
| MIL-DTL-53039 Revision E:2013 | COATING, ALIPHATIC POLYURETHANE, SINGLE COMPONENT, CHEMICAL AGENT RESISTANT |
| MIL-DTL-64159 Revision B:2011 | CAMOUFLAGE COATING, WATER DISPERSIBLE ALIPHATIC POLYURETHANE, CHEMICAL AGENT RESISTANT |
| DOD 4100.39-M : 2010 | FEDERAL LOGISTICS INFORMATION SYSTEM - VOLUME 10: PROCEDURES MANUAL MULTIPLE APPLICATION REFERENCES/INSTRUCTIONS/TABLES AND GRIDS |
| MIL-DTL-4 Revision M:1997 | TIRES AND INNER TUBES (NON-AIRCRAFT); PACKAGING OF |
| ANSI MH10.8.6 : 2013 | BAR CODES AND TWO-DIMENSIONAL SYMBOLS FOR PRODUCT PACKAGING |
| ISO/IEC 15434:2006 | Information technology Automatic identification and data capture techniques Syntax for high-capacity ADC media |
| STANAG 4329 : 2010 | STANDARD NATO BAR CODE SYMBOLOGIES - AAP-44(A) |
| ISO/IEC 15415:2011 | Information technology Automatic identification and data capture techniques Bar code symbol print quality test specification Two-dimensional symbols |
| ASTM D 2582 : 2016 : REDLINE | Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting |
| STANAG 4281 : 2016 | NATO STANDARD MARKING FOR SHIPMENT AND STORAGE |
| ISO/IEC 15438:2015 | Information technology Automatic identification and data capture techniques PDF417 bar code symbology specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.