MIL-PRF-22097 Revision J:2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, GENERAL SPECIFICATION FOR
15-04-2021
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION INSPECTION
Describes the general requirements for multi-turn lead screw actuated and single turn nonwirewound, variable resistors with a contact bearing uniformly over the entire surface of the entire resistive element, when positioned by the actuator.
| Committee |
FSC 5905
|
| DevelopmentNote |
Supersedes MIL R 22097 (G). (02/2002)
|
| DocumentType |
Standard
|
| Pages |
152
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| DSCC 86097 : F | RESISTOR, VARIABLE, PANEL MOUNTED, 1 WATT |
| MIL-DTL-39032 Revision E:2000 | RESISTORS, PACKAGING OF |
| DSCC 97012 : C | RESISTOR, VARIABLE, NONWIRE-WOUND, TRIMMER, 3/4 WATT, FLEXIBLE LEADS |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| MIL-PRF-22097-3 Revision J:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, LEAD SCREW ACTUATED, STYLE RJ22 |
| DSCC 85085 : D | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, 1/2 WATT, TRIMMER |
| MIL-PRF-22097-1 Revision J:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, LEAD SCREW ACTUATED, STYLE RJ11 |
| MIL-PRF-22097-2 Revision H:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, LEAD SCREW ACTUATED, STYLE RJ12 |
| MIL-PRF-22097-5 Revision E:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, LEAD SCREW ACTUATED, STYLE RJ26 |
| MIL-PRF-22097-4 Revision F:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, LEAD SCREW ACTUATED, STYLE RJ24 |
| MIL-PRF-22097-6 Revision G:2010 | RESISTOR, VARIABLE, NONWIREWOUND, ADJUSTMENT TYPE, SINGLE TURN, STYLE RJ50 |
| DSCC 88040 : F | RESISTOR, VARIABLE, SURFACE MOUNT, NONWIREWOUND, TRIMMER |
| DSCC 10009 : 0 | RESISTOR, VARIABLE, SURFACE MOUNT, 4MM, MULTITURN TRIMMER, 1/4 WATT |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-202-304 Base Document:2015 | Method 304, Resistance-Temperature Characteristic |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-303 Base Document:2015 | Method 303, DC Resistance |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-PRF-39035 Revision E:2008 | Resistor, Variable, Nonwirewound (Adjustment Type), Nonestablished Reliability, and Established Reliability, General Specification for |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.