MIL-I-983 Revision E:1966
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
INTERIOR COMMUNICATION EQUIPMENT, NAVAL SHIPBOARD, BASIC DESIGN REQUIREMENTS FOR
Available format(s)
PDF
Superseded date
16-10-1991
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Covers the basic design requirements, test and operating conditions for interior communication equipment to be used in Naval ships. Purpose is to secure uniformity of practice, quality of materials and workmanship necessary to meet the special requirements for equipments to be installed in ships of the United States Navy.
| DocumentType |
Standard
|
| Pages |
68
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| MIL M 2130 : A | MOTOR GENERATORS, GENERAL PURPOSE (NAVAL SHIPBOARD USE) |
| MIL-A-21577-6 Revision A:1962 | AMPLIFIER ASSEMBLY, AM-2316/SIA |
| MIL-U-18033 Revision F:1962 | UNDERWATER LOG EQUIPMENT, ELECTROMAGNETIC TYPE |
| MIL-A-21577-10 Base Document:1968 | AMPLIFIER, AUDIO FREQUENCY-EMERGENCY REPORT SYSTEM |
| MIL-A-21577-4 Revision B:1968 | AMPLIFIER-OSCILLATOR GROUP, AN/SIA-117 |
| MIL-A-17196 Revision E:1977 | ALARM SWITCHBOARDS, ALARM PANELS, REMOTE SENTRY ALARM SWITCH, SIGNAL UNITS, AND SPECIAL ALARM CONNECTION BOX, NAVAL SHIPBOARD |
| MIL-A-15373 Revision B:1964 | ANNUNCIATORS, NAVAL SHIPBOARD |
| MIL-M-17185 Revision A:1956 | MOUNT, RESILIENT, GENERAL SPECIFICATION AND TESTS FOR (SHIPBOARD APPLICATION) |
| MIL M 23813 : A | MICROPHONES, INTERCOMMUNICATION AND ANNOUNCING SYSTEMS, NAVAL SHIPBOARD |
| MIL-C-18106 Revision F:1967 | COMPASS, GYRO, VEHICLE |
| MIL S 23960 : NOTICE 1 | SEXTANT, TYPE III, PERISCOPE |
| MIL-A-15344 Revision J:1963 | AMPLIFIER, SYNCHRO SIGNAL |
| MIL-A-22523 Revision E:1968 | ANALYZER-INDICATOR, DEAD RECKONING (DRAI) (NAVAL SHIPBOARD) |
| MIL-A-16294 Revision C:1963 | AMPLIFIER, AUDIO FREQUENCY (AMPLIFIER-LOUDSPEAKER EQUIPMENT, FREQUENCY RANGE 100 TO 7000 CPS) |
| MIL-T-15377 Revision F:1979 | TEMPERATURE MONITOR EQUIPMENT, NAVAL SHIPBOARD |
| MIL-A-21577-5 Revision A:1962 | AMPLIFIER-OSCILLATOR GROUP, AN/SIA-118 |
| MIL A 24045 : 69 NOTICE 1 | ALIDADE, BINOCULAR MARINE |
| MIL-W-22900 Revision A:1966 | WIND DIRECTION AND WIND SPEED INDICATING EQUIPMENT, TYPE F |
| MIL-L-17080 Revision C:1968 | LOUDSPEAKER, PERMANENT MAGNET FOR SHIPBOARD ENTERTAINMENT SYSTEMS |
| MIL-R-15472 Revision C:1966 | RELAY, MOTOR DRIVEN |
| MIL-A-21577-2 Base Document:1965 | AMPLIFIER-CONTROL GROUP, AN/SIA-115 |
| MIL-T-16049 Revision C:1980 | TACHOMETER: ELECTRICAL; SELF GENERATING; MECHANICAL, FIXED MOUNTING AND HAND HELD; AND VIBRATING REED |
| MIL T 24229 : 0 | TEST SET (PORTABLE), FOR REPEATER, MULTI-SPEED, 3-CHANNEL, NAVIGATION SYSTEM |
| MIL-A-21577-7 Revision B:1968 | AMPLIFIER-CONTROL GROUP AN/SIA-119 |
| MIL A 16749 : E | AMPLIFIER, AUDIO FREQUENCY, SOUND POWERED TELEPHONE SYSTEM |
| MIL-P-21381 Revision B:1963 | PLOTTING BOARDS, SHIP'S STATUS AND TACTICAL DISPLAY (NAVAL SHIPBOARD USE) |
| MIL-T-24448 Revision A:1971 | TORSIONMETER (FOR MEASUREMENT OF TORQUE DEFLECTION OF PROPELLER PROPULSION SHAFTS OF NAVAL SHIPS) |
| MIL-A-21577-3 Base Document:1964 | AMPLIFIER-CONTROL GROUP, AN/SIA-116 |
| MIL-R-24177 Base Document:1965 | REPEATER, MULTI-SPEED, 3-CHANNEL, NAVIGATION SYSTEM |
| MIL-A-21577-1 Revision A:1961 | AMPLIFIER-OSCILLATOR GROUP AN/SIA-114 |
| MIL-C-17317 Revision A:1967 | COMPUTER, SHIP'S STABILITY |
| MIL-A-17053 Revision E:1967 | AUDIO ENTERTAINMENT SYSTEM EQUIPMENT, SHIPBOARD |
| MIL-A-21577 Revision A:1967 | AMPLIFIERS, AUDIO FREQUENCY; AMPLIFIER-CONTROL GROUPS-SHIPBOARD ANNOUNCING |
| MIL-A-21577-9 Base Document:1964 | AMPLIFIER-CONTROL GROUP, AN/SIA-122(V) |
| MIL-M-37217 Base Document:1976 | METER SALINITY INDICATING, ELECTRIC, FLUSH MOUNTING RECTANGULAR |
| MIL-C-16065 Revision B:1965 | COMPUTER, LONGITUDINAL STRESS AND SHIPS DRAFT |
| MIL-P-15418 Revision C:1961 | PLOTTING BOARD, TACTICAL DISPLAY (SYNCHRO, 24 INCH) |
| MIL-C-23174 Base Document:1962 | CONSOLE, SHIPS AIRCRAFT INERTIAL SYSTEM ALIGNMENT (SAISAC) |
| MIL-P-23141 Revision D:1968 | PLOTTING TABLE, ANTI SUBMARINE AND DEAD RECKONING (NAVAL SHIPBOARD) |
| MIL-A-24366 Base Document:1969 | AMPLIFIER SYSTEM, AUDIO, LOW NOISE, HIGH INPUT IMPEDANCE |
| MIL-L-24296 Revision A:1970 | LOUDSPEAKER, PRESSURE PROOF, TYPE LS-45O((/B) |
| MIL S 15291 : E | SWITCHES, ROTARY, SNAP ACTION AND DETENT/SPRING RETURN ACTION, GENERAL SPECIFICATION FOR |
| MIL-I-24092 Revision D:1993 | INSULATING VARNISHES AND SOLVENTLESS RESINS FOR APPLICATION BY THE DIP PROCESS |
| MIL-I-3190 Revision F:1991 | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, COATED, GENERAL SPECIFICATION FOR |
| MIL-F-21346 Revision B:1976 | FUSEHOLDERS, BLOCK, AND SHROUD TYPE, AND ASSOCIATED FUSE CLIPS; GENERAL SPECIFICATION FOR |
| MIL-I-17205 Revision C:1961 | INSULATION CLOTH AND TAPE, ELECTRICAL, GLASS FIBER, VARNISHED |
| QQ-C-585 Revision B:1974 | COPPER NICKEL ZINC ALLOY PLATE, SHEET, STRIP AND BAR (COPPER ALLOY NUMBERS 735, 745, 762, 766 AND 770 |
| MIL G 3545 : LATEST | GREASE, AIRCRAFT, HIGH TEMPERATURE |
| FF-S-210 Revision B:1981 | SETSCREWS, SQUARE HEAD (INCH) AND SLOTTED HEADLESS (INCH AND METRIC) |
| MS 35339 : LATEST | WASHER, LOCK, SPLIT, HELICAL, HEAVY SERIES |
| L-P-513 Revision C:1968 | PLASTIC SHEET AND INSULATION SHEET, ELECTRICAL (LAMINATED, THERMOSETTING, PAPER-BASE, PHENOLIC-RESIN) |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| MS17041 Revision C:1967 | STUFFING TUBE, NPT NYLON SIZE 4T |
| MIL S 12883 : D | SOCKET AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS GENERAL SPECIFICATION FOR |
| FF-B-171 Revision B:1993 | BEARINGS, BALL, ANNULAR (GENERAL PURPOSE), METRIC |
| MIL S 867 : A | STEEL CASTING, CORROSION RESISTING AUSTENITIC |
| MIL P 8585 : LATEST | PRIMER COATING, ZINC CHROMATE, LOW-MOISTURE SENSITIVITY |
| L-P-504 Revision E:1991 | PLASTIC SHEET AND FILM, CELLULOSE ACETATE |
| MIL-STD-701 Revision P:1992 | LISTS OF STANDARD SEMICONDUCTOR DEVICES |
| MIL T 15659 : H | TERMINAL, LUG, SOLDER, COPPER AND PHOSPHOR BRONZE |
| MS35335 Revision G:2004 | WASHER, LOCK, FLAT EXTERNAL TOOTH (IN./MM) |
| MIL E 21981B:1986 | ELECTRONICS EQUIPMENT, NOMENCLATURE, SERIAL NUMBERS AND IDENTIFICATION PLATES: REQUIREMENTS FOR |
| MIL S 8805 : D | SWITCHES, AND SWITCH ASSEMBLIES, SENSITIVE AND PUSH, SNAP ACTION, GENERAL SPECIFICATION FOR |
| MIL-P-15047 Revision C:1971 | PLASTIC MATERIAL, LAMINATED THERMOSETTING SHEETS, NYLON FABRIC BASE, PHENOLIC RESIN |
| MIL B 5423 : C | BOOT, DUST AND WATER SEAL 1 [FOR TOGGLE AND PUSHBUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY ACTUATED PARTS] GENERAL SPECIFICATION FOR |
| MIL-P-997 Revision D:1966 | PLASTIC MATERIAL, LAMINATED, THERMOSETTING, ELECTRIC INSULATION, SHEETS, GLASS CLOTH, SILICONE RESIN |
| MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL P 15328 : LATEST | PRIMER PRETREATMENT FORMULA 117 FOR METALS |
| MIL W 583 : C | WIRE, MAGNET, ELECTRICAL |
| MIL T 16784 : LATEST | |
| QQ-W-423 Revision B:1969 | FEDERAL SPECIFICATION - WIRE, STEEL, CORROSION RESISTING |
| MIL-P-79 Revision C:1961 | PLASTIC ROD AND TUBE THERMOSETTING LAMINATED |
| MIL-STD-740 Revision B:1965 | AIRBORNE AND STRUCTURE BORNE NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| MS15573 Revision E:1968 | LAMP INCANDESCENT G-3 1/2 MINATURE BAYONET BASE SINGLE CONTACT |
| MIL G 3278 : LATEST | GREASE, AIRCRAFT AND INSTRUMENT (FOR LOW AND HIGH TEMPERATURES) |
| MIL-P-10971 Revision E:1969 | PIN, SPRING, TUBULAR (COILED AND SLOTTED) |
| MIL G 18709 : LATEST | GREASE, BALL AND ROLLER BEARING |
| L-P-387 Revision A:1963 | PLASTIC SHEET, LAMINATED, THERMOSETTING (FOR DESIGNATION PLATES) |
| FF-N-836 Revision E:1994 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MIL P 15024 : E | PLATES, TAGS AND BANDS FOR IDENTIFICATION OF EQUIPMENT |
| MS17040 Revision B:1967 | STUFFING TUBE NPT NYLON SIZE 2 |
| MIL S 21604 : D | SWITCHES, ROTARY, MULTIPOLE AND SELECTOR - GENERAL SPECIFICATION FOR |
| QQ-C-320 Revision B:1974 | CHROMIUM PLATING (ELECTRODEPOSITED) |
| MIL-I-10 Revision B:1966 | INSULATING COMPOUND ELECTRICAL CERAMIC CLASS 1 |
| MIL-I-3158 Revision D:1968 | INSULATION TAPE, ELECTRICAL GLASS FIBER [RESIN FILLED] AND CORD, FIBROUS GLASS |
| MIL-P-15035 Revision C:1962 | PLASTIC SHEET, LAMINATED, THERMOSETTING, COTTON FABRIC BASE, PHENOLIC RESIN |
| MIL-P-18177 Revision C:1960 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS FIBER BASE, EPOXY RESIN |
| QQ C 586 : C | COPPER NICKEL ZINC ALLOY, ROD, SHAPES, FLAT PRODUCTS WITH FINISHED EDGES (FLAT WIRE, STRIP, AND BAR) |
| MIL-B-17931 Revision E:1987 | BEARINGS, BALL, ANNULAR, FOR QUIET OPERATION |
| QQ-S-365 Revision D:1985 | SILVER PLATING, ELECTRODEPOSITED, GENERAL REQUIREMENTS FOR |
| MIL L 15719 : A | LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS) |
| QQ-C-530 Revision C:1971 | COPPER BERYLLIUM ALLOY BAR, ROD, AND WIRE (COPPER ALLOY NUMBERS 172 AND 173) |
| QQ-A-596 Revision E:1981 | ALUMINUM ALLOY PERMANENT AND SEMI-PERMANENT MOLD CASTINGS |
| VV-P-236 Revision A:1977 | PETROLATUM, TECHNICAL |
| MIL-STD-276 Revision A:1992 | IMPREGNATION OF POROUS METAL CASTINGS AND POWDERED METAL COMPONENTS |
| MIL-M-15071 Revision H:1991 | MANUAL, TECHNICAL, EQUIPMENTS AND SYSTEMS CONTENT REQUIREMENTS FOR |
| FF-W-100 Revision C:1969 | WASHER, LOCK, TOOTH |
| QQ-C-533 Revision B:1972 | COPPER BERYLLIUM ALLOY STRIP (COPPER ALLOY NUMBERS 170 AND 172) |
| MIL R 2765 : D | RUBBER SHEET, STRIP, EXTRUDED AND MOLDED SHAPES, SYNTHETIC, OIL RESISTANT |
| MIL S 15743 : C | SWITCH, ROTARY, ENCLOSED |
| MS17143 Revision F:1981 | TERMINAL LUG, CRIMP STYLE, COPPER INSULATED, RECTANGULAR TONGUE TYPE II CLASS 1 FOR 105 DEG.C. TOTAL CONDUCTOR TEMPERATURE |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| QQ-A-591 Revision F:1981 | ALUMINUM ALLOY DIE CASTINGS |
| MIL E 17362 : D | ELECTRONIC REPAIR PART REQUIREMENT, PROCEDURE FOR PROVISIONING TECHNICAL DOCUMENTATION & STOCK NUMBERING |
| MIL F 19207/1 : G | FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING, TYPE FHL 10U |
| MIL R 22 : C | RESISTOR VARIABLE (WIREWOUND POWER TYPE) GENERAL SPECIFICATION FOR |
| MIL S 3950 : F | SWITCH, TOGGLE ENVIRONMENTALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL-P-15037 Revision E:1965 | PLASTIC SHEET, LAMINATED, THERMOSETTING, GLASS CLOTH, MELAMINE RESIN |
| MIL-A-21180 Revision D:1984 | ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH |
| MIL F 15160/30 : NOTICE 1 | FUSE, STYLE F30 |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| MIL I 18057 : A | INSULATION SLEEVING, ELECTRICAL, FLEXIBLE, GLASS FIBER, SILICONE RUBBER TREATED |
| TT-P-664 Revision D:1988 | PRIMER, COATING, ALKYD, CORROSION INHIBITING, LEAD AND CHROMATE FREE, VOC COMPLIANT |
| MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
| DOD-D-1000 Revision B:1977 | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL-T-7928 Revision G:1976 | TERMINAL, LUG SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| FF-W-84 Revision A:1967 | WASHER, LOCK (SPRING) |
| QQ-A-601 Revision F:1981 | ALUMINUM ALLOY SAND CASTINGS |
| MIL-S-8660 Revision C:1983 | SILICONE COMPOUND, NATO CODE NUMBER S 736 |
| MIL L 3661 : B | LAMPHOLDER, INDICATOR LIGHTS, INDICATOR LIGHT HOUSINGS AND INDICATOR LIGHT LENSES GENERAL SPECIFICATION FOR |
| FF-S-92 Revision C:2014 | SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD |
| QQ-W-470 Revision B:1965 | WIRE, STEEL, CARBON, SPRING, MUSIC. |
| MIL C 5015 : G | CONNECTOR, ELECTRICAL, CIRCULAR THREADED AN TYPE, GENERAL SPECIFICATION FOR |
| MIL-STD-167 Base Document:1993 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT |
| MIL G 23827 : B | GREASE, AIRCRAFT AND INSTRUMENT, GEAR AND ACTUATOR SCREW |
| MIL-T-22361 Base Document:1960 | THREAD COMPOUND, ANTISEIZE, ZINC DUST-PETROLATUM |
| MIL D 1000/2 : LATEST | DRAWINGS, ENGINEERING AND ASSOCIATED LISTS |
| MIL T 713 : E | TWINE, FIBROUS, IMPREGNATED, LACING AND TYING |
| MIL R 15624 : F | RUBBER GASKET MATERIAL, 50 DUROMETER HARDNESS (MAXIMUM) |
| QQ-P-416 Revision F:1991 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| MIL-I-16923 Revision H:1991 | INSULATING COMPOUND, ELECTRICAL, EMBEDDING, EPOXY |
| MIL-I-631 Revision D:1961 | INSULATION, ELECTRICAL, SYNTHETIC - RESIN COMPOSITION, NONRIGID |
| MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
| MIL-STD-681 Revision F:2012 | IDENTIFICATION CODING AND APPLICATION OF HOOKUP AND LEAD WIRE |
| MIL-STD-200 Revision K:1974 | ELECTRON TUBE, SELECTION OF |
| MS15572 Revision D:1978 | LAMP INCANDESCENT G-4 1/2 MINATURE BAYONET SINGLE CONTACT |
| MIL E 15090 : C | ENAMEL, EQUIPMENT, LIGHT GRAY (FORMULA NO. 111) |
| MIL-M-14 Revision H:1990 | MOLDING COMPOUNDS, THERMOSETTING |
| MS35338 Revision L:1994 | WASHER, LOCK SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| MIL-S-22432 Revision A:1990 | SERVOMOTOR, GENERAL SPECIFICATION |
| QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) |
| MIL B 16246 : D | BILL OF MATERIALS (FOR SHIPS AND SHIPS COMPONENTS) |
| MIL-STD-242 Revision G:1981 | ELECTRONIC EQUIPMENT PARTS SELECTED STANDARDS |
| MIL P 5425 : D | PLASTIC, SHEET, ACRYLIC, HEAT RESISTANT |
| MIL W 16878 : F | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL L 6085 : C | LUBRICATING OIL, INSTRUMENT, AIRCRAFT, LOW VOLATILITY |
| MIL R 94 : E | RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR |
| MIL F 19207/2 : F | FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING, TYPE FHL11U |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| MIL R 978 : A NOTICE 1 | REPORTS: RESEARCH AND DEVELOPMENT (FOR ELECTRONIC EQUIPMENT) |
| MIL C 3965 : F | CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.