MIL-DTL-83522 Revision E:2013
Current
Current
The latest, up-to-date edition.
Connectors, Fiber Optic, Single Ferrule, General Specification for
Available format(s)
PDF
Published date
17-05-2013
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the characteristics, performance and testing criteria for single ferrule fiber optic connectors.
| DevelopmentNote |
Supersedes MIL C 83522 (D). (05/2013)
|
| DocumentType |
Standard
|
| Pages |
53
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification defines the characteristics, performance and testing criteria for single ferrule fiber optic connectors. The connectors described herein cover families as listed in 1.2. The connectors are supplied under a MIL-STD-790 reliability assurance program. See 6.1 for restrictions on intended use and applications.
| MIL-STD-1678-6 Revision A:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 6: PARTS AND SUPPORT EQUIPMENT COMMONALITY AND STANDARDIZATION REQUIREMENTS (PART 6 OF 6 PARTS) |
| MIL-DTL-32529 Base Document:2015 | POWER ELECTRONIC CONVERSION EQUIPMENT, NAVAL SHIPBOARD |
| MIL-STD-2042-6 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (TESTS) (PART 6 OF 7 PARTS) |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-83522-16 Revision C:2013 | Connector, Fiber Optic, Single Terminus, Plug, Bayonet Coupling (ST Style), 2.5 Millimeters Diameter Ferrule, Epoxy |
| MIL-DTL-83522-17 Revision C:2013 | CONNECTOR, FIBER OPTIC, SINGLE TERMINUS, ADAPTER, BAYONET COUPLING (ST STYLE), 2.5 MILLIMETER DIAMETER FERRULE, BULKHEAD PANEL MOUNT |
| MIL-STD-1678-2 Revision A:2013 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS) |
| MIL-STD-2042-1 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CABLES) (PART 1 OF 7 PARTS) |
| MIL-STD-2042-5 Revision C:2016 | FIBER OPTIC CABLE TOPOLOGY INSTALLATION STANDARD METHODS FOR SURFACE SHIPS AND SUBMARINES (CONNECTORS AND INTERCONNECTIONS) (PART 5 OF 7 PARTS) |
| TIA 455-14 : A1992(R2012) | FIBER OPTIC SHOCK TEST (SPECIFIED PULSE) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| TIA/EIA 455-71 : A1999(R2014) | PROCEDURE TO MEASURE TEMPERATURE-SHOCK EFFECTS ON FIBER OPTIC COMPONENTS |
| TIA/EIA 455-11 : D2010(R2014) | FOTP-11 - VIBRATION TEST PROCEDURE FOR FIBER OPTIC COMPONENTS AND CABLES |
| TIA/EIA 455-1 : B1998(R2008) | CABLE FLEXING FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ASTM D 1430 : 2017 : REDLINE | Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| TIA 455-12 : B2008(R2013) | FLUID IMMERSION TEST FOR FIBER OPTIC COMPONENTS - FOTP-12 |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| TIA 455-36 : A1986(R2012) | FOTP-36 - TWIST TEST FOR FIBER OPTIC CONNECTING DEVICES |
| TIA 455-21 : A1988(R2012) | FOTP-21 MATING DURABILITY FOR FIBER OPTIC INTERCONNECTING DEVICES |
| ASTM D 6778 : 2014 : REDLINE | Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM) |
| ASTM E 595 : 2015 : REDLINE | Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| ASTM B 121/B121M : 2016 : REDLINE | Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| TIA 455-189 : 1992(R2012) | OZONE EXPOSURE TEST FOR FIBER OPTIC COMPONENTS |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| TIA/EIA 455-4 : C2002(R2014) | FIBER OPTIC COMPONENT TEMPERATURE LIFE TEST |
| TIA/EIA 455-3 : B2009(R2014) | PROCEDURE TO MEASURE TEMPERATURE CYCLING EFFECTS ON OPTICAL FIBER UNITS, OPTICAL CABLE, AND OTHER PASSIVE FIBER COMPONENTS |
| TIA 455-107 : A1999 | DETERMINATION OF COMPONENT REFLECTANCE OR LINK/SYSTEM RETURN LOSS USING A LOSS TEST SET |
| TIA 455-64 : 1998(R2002) | PROCEDURE FOR MEASURING RADIATION-INDUCED ATTENUATION IN OPTICAL FIBERS AND OPTICAL CABLES |
| SAE AMSQQS763D | Steel, Corrosion Resistant, Bars, Wire, Shapes, and Forgings |
| TIA 455-20 : B2004(R2013) | OPTICAL FIBRES - PART 1-46: MEASUREMENT METHODS AND TEST PROCEDURES - MONITORING OF CHANGES IN OPTICAL TRANSMITTANCE |
| MIL-STD-790 Revision G:2011 | Established Reliability and High Reliability Qualified Products List (QPL) Systems for Electrical, Electronic, and Fiber Optic Parts Specifications |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| SAE AMSQQA225B | Aluminum and Aluminum Alloy, Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; General Specification For |
| MIL-DTL-55330 Revision C:2001 | CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| SAE AMS2700E | Passivation of Corrosion Resistant Steels |
| TIA/EIA 455-5 : C2002 | HUMIDITY TEST PROCEDURE FOR FIBER OPTIC COMPONENTS |
| TIA/EIA 455-34 : A1995(R2002) | INTERCONNECTION DEVICE INSERTION LOSS TEST |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-1678-2 Revision A:2013 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 2: OPTICAL MEASUREMENTS (PART 2 OF 6 PARTS) |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| TIA/EIA 455-32 : A1990(R2008) | FOTP-32 - FIBER OPTIC CIRCUIT DISCONTINUITIES |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| TIA 455-22 : B1993(R2012) | AMBIENT LIGHT SUSCEPTIBILITY OF FIBER OPTIC COMPONENTS |
| MIL-STD-1678-3 Revision C:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 3: PHYSICAL, MECHANICAL, ENVIRONMENTAL AND MATERIAL MEASUREMENTS (PART 3 OF 6 PARTS) |
| TIA 455-6 : B1992(R2012) | CABLE RETENTION TEST PROCEDURE FOR FIBER OPTIC CABLE INTERCONNECTING DEVICES |
| TIA 455-56 : C2009(R2017) | TEST METHOD FOR EVALUATING FUNGUS RESISTANCE OF OPTICAL FIBER AND CABLE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.