
MIL-DTL-45932 Revision A:2015
Current
The latest, up-to-date edition.

INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for thin wall, solid bushing, locked in, screw thread inserts.
Committee |
FSC 5325
|
DevelopmentNote |
Supersedes MIL I 45932. (05/2015) NEW CHILD NOT 1 2021 IS ADDED
|
DocumentType |
Standard
|
Pages |
35
|
ProductNote |
NEW CHILD NOT 1 2021 IS ADDED
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
ASTM F 1941/F1941M : 2016 : REDLINE | Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric |
SAE AMS 5737 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS AND TUBING, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1650 DEGREES F (899 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
SAE AMSQQP416E | Plating, Cadmium (Electrodeposited) |
SAE AMS6322P | Steel Bars, Forgings, and Rings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) |
MIL-DTL-45932-3 Revision C:2015 | INSERT, SCREW THREAD - THIN WALL, LOCKED IN, OVERSIZE REPLACER |
SAE AMS5643U | Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb (Nb) - 4.0Cu Solution Heat Treated, Precipitation Hardenable |
MIL-DTL-45932-1 Revision D:2015 | INSERT, SCREW THREAD - THIN WALL, LOCKED IN |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
SAE AMS4650M | Copper-Beryllium Alloy, Bars, Rods, Shapes, and Forgings 98Cu - 1.9Be Solution Heat Treated TB00 (A) |
MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
SAE AS5272E | Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification |
SAE AMS 5732 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED 1800 DEGREES F (982 DEGREES C), SOLUTION AND PRECIPITATION HEAT TREATED |
NASM1312-6:2013 | FASTENER TEST METHODS, METHOD 6, HARDNESS |
ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
SAE AMS 5731 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 15CR - 25.5NI - 1.2MO - 2.1TI - 0.006B - 0.30V, CONSUMABLE ELECTRODE MELTED, 1800 DEGREES F (982 DEGREES C) SOLUTION HEAT TREATED |
SAE AIR4127A | Steel: Chemical Composition and Hardenability |
SAE AMS2411H | Plating, Silver for High Temperature Applications |
SAE AMS4117K | Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651) |
MIL-DTL-45932-2 Revision C:2015 | INSERT, SCREW THREAD - THIN WALL, LOCKED IN, NON METALLIC LOCKING ELEMENT (-60 DEGREES TO +250 DEGREES FAHRENHEIT) |
SAE AMS2700E | Passivation of Corrosion Resistant Steels |
L-P-410 Revision A:1966 | PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS |
SAE AMS6370P | Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
SAE AMS4128D | Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching |
SAE AMSQQA225/6A | Aluminum Alloy, 2024, Bar, Rod, and Wire; Rolled, Drawn, or Cold Finished |
FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
ASTM B 928/B928M : 2015 : REDLINE | Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments |
MIL-PRF-46010 Revision H:2013 | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING NATO CODE S-1738 |
MIL-S-7742 Revision D:1991 | SCREW THREADS, STANDARD, OPTIMUM SELECTED SERIES, GENERAL SPECIFICATION FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.