MIL-DTL-32435 Base Document:2013
NA
Status of Standard is Unknown
Hose, Polytetrafluoroethylene, Convoluted, 450 Degrees F, Medium Pressure
English
23-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies the requirements for a medium pressure, high temperature, convoluted polytetrafluoroethylene (PTFE) hose reinforced with corrosion-resistant (CRES) steel wire.
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
This specification covers the requirements for a medium pressure, high temperature,convoluted polytetrafluoroethylene (PTFE) hose reinforced with corrosion-resistant (CRES) steel wire (see 3.4.2).
| MIL-DTL-32434-4 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flareless-to-Flange |
| MIL-DTL-32434-3 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-To-Flange |
| MIL-DTL-32434-7 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MIL-DTL-32434-8 Base Document:2013 | Hose, Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange |
| MIL-DTL-32434-1 Base Document:2013 | Hose, Assembly, Polytetrafluoroethylene, Convoluted, Reusable Fittings, High Temperature, Medium Pressure, Flare-to Flare |
| MIL-DTL-32434-10 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange |
| MIL-DTL-32434-6 Base Document:2013 | Hose Assembly, Polytetrafluorethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flare |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| SAE ARP 1153 : 2014 | METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING |
| MIL-DTL-27272 Revision D:2015 | Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| MIL-DTL-32434-8 Base Document:2013 | Hose, Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flange |
| MIL-PRF-87257 Revision C:2017 | HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE |
| MIL-DTL-32434-6 Base Document:2013 | Hose Assembly, Polytetrafluorethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flare-to-Flare |
| MIL-DTL-32434-10 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flange-to-Flange |
| SAE AS 2078 : 2015 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
| MIL-PRF-83282 Revision D:1997 | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537 |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MIL-DTL-32434 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for |
| MIL-DTL-32434-7 Base Document:2013 | Hose Assembly, Polytetrafluoroethylene, Convoluted, Permanently Attached Fittings, High Temperature, Medium Pressure, Flareless-to-Flareless |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.