MIL-DTL-23928 Revision G:2014
Current
Current
The latest, up-to-date edition.
PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE
Available format(s)
PDF
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes high-impact (H.I.) shockproof and vibration proof, bulkhead mounted electrical power distribution and transfer panels using ALB, NLB, AQB, and NQB circuit breakers for feeder and branch circuit protection and control for alternating current (ac) and direct current (dc) application on naval ships.
| Committee |
FSC 5925
|
| DevelopmentNote |
Supersedes MIL P 23928 (D) (04/2001)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-23928-8 Revision D:2017 | PANEL, ELECTRICAL, MANUAL TRANSFER FOR DOUBLE AQB-A252, AQB-A253, NQB-A250, CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSE AND WATERTIGHT |
| MIL-DTL-23928-5 Revision D:2017 | PANEL, ELECTRICAL, MANUAL TRANSFER FOR DOUBLE AQB-A102, AQB-A103, NQB-A101 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT |
| MIL-DTL-23928-1 Revision F:2017 | PANEL, ELECTRICAL, 125 VOLTS, POWER DISTRIBUTION FOR ALB-1 AND NLB-1 CIRCUIT BREAKERS, 4-24 CIRCUITS, DRIPPROOF, THREE PHASE FEED, SINGLE AND THREE PHASE LOADS, TOTALLY ENCLOSED AND WATERTIGHT |
| MIL-DTL-23928-3 Revision D:2017 | PANEL, ELECTRICAL, POWER DISTRIBUTION FOR SINGLE AQB-A101, AQB-A102, AQB-A103, NQB-A101 CIRCUIT BREAKER DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT |
| MIL-DTL-23928-4 Revision E:2013 | Panel, Electrical, Power Distribution for Double AQB-A101, AQB-A102, AQB-A103 and NQB-A101, NQB-A250 Circuit Breakers, 2-12 Circuits, with and without Manual Transfer, Dripproof, Totally Enclosed and Watertight |
| MIL-DTL-23928-2 Revision E:2017 | PANEL, ELECTRICAL, VOLTS, POWER DISTRIBUTION FOR AQB-A50, AQB-A51 AND NQB-A50 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT |
| MIL-DTL-23928-7 Revision D:2017 | PANEL, ELECTRICAL, POWER DISTRIBUTION FOR DOUBLE AQB-A250, AQB-A252, AQB-A253, NQB-A250 CIRCUIT BREAKERS, DRIPPROOF, TOTALLY ENCLOSED AND WATERTIGHT |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| MIL-HDBK-2036 Base Document:1999 | PREPARATION OF ELECTRONIC EQUIPMENT SPECIFICATIONS |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-24643-15 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSDSGU |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MIL-C-17588 Revision E:1985 | CIRCUIT BREAKERS (AUTOMATIC - ALB) AND SWITCH, TOGGLE (CIRCUIT BREAKER, NON AUTOMATIC - NIB) AIR, INSULATED HOUSING, 125 VOLTS AND BELOW AC OR DC (NAVAL SHIPBOARD USE) |
| MIL-DTL-1222 Revision J:2000 | STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
| MIL-I-24768-1 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-CLOTH, MELAMINE-RESIN (GME) |
| MIL-DTL-3661 Revision D:2013 | Lampholders, Indicator Lights, Indicator Light Housings, and Indicator Light Lenses, General Specification for |
| MIL-I-24768-6 Base Document:1992 | INSULATION, PLASTIC, LAMINATED, THERMOSETTING, GLASS-MAT, POLYESTER-RESIN (GPO N-3) |
| MIL-DTL-17361 Revision G:2006 | CIRCUIT BREAKER TYPES AQB/NQB, AIR, ELECTRIC, LOW VOLTAGE, INSULATED HOUSING (SHIPBOARD USE), GENERAL SPECIFICATION FOR |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| NAVSEA S9074 AR GIB 010/278 : 0 | REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
| MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
| MIL-STD-108 Revision E:1966 | DEFINITION OF AND BASIC REQUIREMENT FOR ENCLOSURE FOR ELECTRIC AND ELECTRONIC EQUIPMENT |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-P-15024-5 Base Document:1971 | PLATE, IDENTIFICATION |
| MIL-DTL-15024 Revision F:1997 | Plates and Tags for Identification of Equipment, General Specification for |
| MIL-PRF-16173 Revision E:1993 | CORROSION PREVENTATIVE COMPOUND, SOLVENT CUTBACK, COLD-APPLICATION |
| MIL-DTL-24643-16 Revision F:2009 | Cable, Electrical, -4 Degrees Fahrenheit (-20 Degrees Celsius) to +221 Degrees Fahrenheit (+105 Degrees Celsius), 1,000 Volts, Type LSTSGU |
| A-A-59781 Base Document:2005 | LIGHT EMITTING DIODES FOR USE AS INDICATOR LIGHTS |
| MIL-I-24768 Base Document:1992 | INSULATION, PLASTICS, LAMINATED, THERMOSETTING, GENERAL SPECIFICATION FOR |
| MIL-PRF-900 Revision F:1973 | RUBBER GASKET MATERIAL, 45 DUROMETER HARDNESS |
| MIL-STD-167-1 Revision A:2005 | MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
| NAVSEA S9074 AQ GIB 010/248 : 0 | REQUIREMENTS FOR WELDING AND BRAZING PROCEDURE AND PERFORMANCE QUALIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.