MIL-A-8860 Revision B:1987
Current
The latest, up-to-date edition.
AIRPLANE STRENGTH AND RIGIDITY GENERAL SPECIFICATION FOR
English
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
Describes requirements defining the structural design, analysis, test, and data requirements for fixed wing piloted airplanes.
Committee |
FSC 1510
|
DocumentType |
Standard
|
Pages |
17
|
ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
MIL A 8893 : 0 | AIRPLANE STRENGTH AND RIGIDITY, SONIC FATIGUE |
SAE AIR 5451 : 2017 | A GUIDE TO LANDING GEAR SYSTEM INTEGRATION |
MIL A 8862 : 0 | AIRPLANE STRENGTH AND RIGIDITY, LANDPLANE, LANDING AND GROUND HANDLING LOADS |
MIL-STD-8591 Base Document:2005 | AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE) |
MIL-A-8866 Revision C:1987 | AIRPLANE STRENGTH AND RIGIDITY RELIABILITY REQUIREMENTS, REPEATED LOADS, FATIGUE AND DAMAGE TOLERANCE |
MIL-A-23121 Revision C:1970 | AIRCREW ENVIRONMENTAL, ESCAPE AND SURVIVAL COCKPIT CAPSULE SYSTEM, GENERAL SPECIFICATION FOR |
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/17(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/16(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
MIL-HDBK-244 Revision A:1990 | GUIDE TO AIRCRAFT - STORES COMPATIBILITY |
MIL STD 1763 : A | AIRCRAFT STORES CERTIFICATION PROCEDURES |
MIL B 38608 : A | BOMB, FIRE, BLU-23/B |
MIL-A-8870 Revision C:1993 | AIRPLANE STRENGTH AND RIGIDITY VIBRATION, FLUTTER, AND DIVERGENCE |
MIL-A-8863 Revision C:1993 | AIRPLANE STRENGTH AND RIGIDITY GROUND LOADS FOR NAVY ACQUIRED AIRPLANES |
MIL-A-8591 Revision H:1990 | AIRBORNE STORES, SUSPENSION EQUIPMENT AND AIRCRAFT-STORE INTERFACE (CARRIAGE PHASE); GENERAL DESIGN CRITERIA FOR |
SAE ARP 94910 : 2012 | AEROSPACE - VEHICLE MANAGEMENT SYSTEMS - FLIGHT CONTROL DESIGN, INSTALLATION AND TEST OF, MILITARY UNMANNED AIRCRAFT, SPECIFICATION GUIDE FOR |
MIL-S-8812 Revision D:1975 | STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR |
MIL-A-8867 Revision C:1987 | AIRPLANE STRENGTH AND RIGIDITY GROUND TESTS |
MIL-A-8868 Revision B:1987 | AIRPLANE STRENGTH AND RIGIDITY DATA AND REPORTS |
MIL-T-81259 Revision B:1991 | TIE DOWN, AIRFRAME DESIGN, REQUIREMENTS FOR |
MIL-D-23222 Revision A:1971 | DEMONSTRATION REQUIREMENTS FOR HELICOPTERS |
MIL-HDBK-1763 Base Document:1998 | AIRCRAFT/STORES COMPATIBILITY: SYSTEMS ENGINEERING DATA REQUIREMENTS AND TEST PROCEDURES |
MIL-R-7705 Revision B:1975 | RADOME, GENERAL SPECIFICATION FOR |
MIL A 008870 : A | AIRPLANE STRENGTH AND RIGIDITY FLUTTER, DIVERGENCE AND OTHER AEROELASTIC INSTABILITIES |
MIL-DTL-9490 Revision E:2008 | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
JSSG-2006 Base Document:1998 | JOINT SERVICE SPECIFICATION GUIDE - AIRCRAFT STRUCTURES |
MIL-A-23622 Base Document:1963 | ACTUATOR, AIRCRAFT, ELECTRO-MECHANICAL, LINEAR, DIRECT CURRENT |
MIL-A-18717 Revision C:1993 | ARRESTING HOOK INSTALLATIONS, AIRCRAFT |
MIL-A-83136 Revision A:1990 | ARRESTING HOOK INSTALLATION, RUNWAY ARRESTING SYSTEM, AIRCRAFT, EMERGENCY |
MIL A 008862 : A | AIRPLANE STRENGTH AND RIGIDITY, LANDING AND GROUND HANDLING LOADS |
MIL-A-8861 Revision B:1986 | AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS |
MIL-L-87139 Base Document:1979 | LANDING GEAR SYSTEMS REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES. WRIGHT-PATTERSON AFB OH 45433-6503 |
MIL-A-8871 Revision A:1971 | AIRPLANE, TESTS, STRENGTH AND RIGIDITY FLIGHT AND GROUND OPERATIONS |
SAE AS 94900 : 2007 | AEROSPACE - FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED MILITARY AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-W-81752 Revision A:1987 | WINDSHIELDED SYSTEM, FIXED WING AIRCRAFT - GENERAL SPECIFICATION FOR |
SAE ARP 1311 : 2015 | LANDING GEAR STRUCTURES AND MECHANISMS |
SAE ARP 1538 : 2013 | ARRESTING HOOK INSTALLATION, LAND-BASED AIRCRAFT |
JSSG-2009 Revision A:2013 | Air Vehicle Subsystems |
MIL-D-8708 Revision C:1991 | DEMONSTRATION REQUIREMENTS FOR AIRPLANES |
MIL B 38634 : LATEST | BOMB, FIRE, BLU 32A B |
MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
SAE AS 8860 : 2012 | LANDING GEAR STRUCTURAL REQUIREMENTS AS LISTED IN THE MIL-886X SERIES OF SPECIFICATIONS |
MIL-A-8865 Revision B:1987 | AIRPLANE STRENGTH AND RIGIDITY MISCELLANEOUS LOADS |
MIL HDBK 5 : G_VOL2 | METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES |
MIL-A-8863 Revision C:1993 | AIRPLANE STRENGTH AND RIGIDITY GROUND LOADS FOR NAVY ACQUIRED AIRPLANES |
MIL-T-81259 Revision B:1991 | TIE DOWN, AIRFRAME DESIGN, REQUIREMENTS FOR |
MIL-A-22771 Revision D:1984 | ALUMINUM ALLOY FORGINGS, HEAT TREATED |
ANSI Y10.7 : 1954 | LETTER SYMBOLS/AERONAUTICAL SCIENCES |
MIL-A-8869 Revision B:1987 | AIRPLANE STRENGTH AND RIGIDITY NUCLEAR WEAPONS EFFECTS |
MIL-A-8870 Revision C:1993 | AIRPLANE STRENGTH AND RIGIDITY VIBRATION, FLUTTER, AND DIVERGENCE |
QQ-A-367 Revision H:1973 | ALUMINUM ALLOY FORGINGS |
MIL-STD-2175 Revision A:1993 | CASTING, CLASSIFICATION AND INSPECTION OF |
MIL-F-7190 Revision B:1985 | FORGING, STEEL, FOR AIRCRAFT AND AEROSPACE EQUIPMENT AND SPECIAL ORDNANCE APPLICATIONS |
MIL-A-8868 Revision B:1987 | AIRPLANE STRENGTH AND RIGIDITY DATA AND REPORTS |
MIL-A-8867 Revision C:1987 | AIRPLANE STRENGTH AND RIGIDITY GROUND TESTS |
MIL-A-21180 Revision D:1984 | ALUMINUM-ALLOY CASTINGS, HIGH STRENGTH |
MIL-A-8861 Revision B:1986 | AIRPLANE STRENGTH AND RIGIDITY FLIGHT LOADS |
MIL-A-8866 Revision C:1987 | AIRPLANE STRENGTH AND RIGIDITY RELIABILITY REQUIREMENTS, REPEATED LOADS, FATIGUE AND DAMAGE TOLERANCE |
MIL-D-8708 Revision C:1991 | DEMONSTRATION REQUIREMENTS FOR AIRPLANES |
MIL-F-83142 Revision A:1969 | FORGING, TITANIUM ALLOYS, PREMIUM QUALITY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.