ISO/IEC/IEEE 8802-3:2017
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
06-03-2021
Superseded by
Published date
31-03-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO/IEC/IEEE 8802-3:2017 defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at selected speeds of operation; and uses a common media access control (MAC) specification and management information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD) MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes received frames with the modulation specified for the speed of operation, transmission medium and supported link length. Other specified capabilities include: control and management protocols, and the provision of power over selected twisted pair PHY types.
| Committee |
ISO/IEC JTC 1/SC 6
|
| DevelopmentNote |
Supersedes ISO/IEC 8802-3. (04/2015)
|
| DocumentType |
Standard
|
| Pages |
4000
|
| ProductNote |
NEW CHILD AMD 1 IS NOW ADDED NEW CHILD AMD 5 IS NOW ADDED NEW CHILD AMD 6 2018 IS ADDED
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| BS ISO/IEC/IEEE 8802-3:2017 | Identical |
| NEN ISO/IEC/IEEE 8802-3 : 2017 AMD 7 2017 | Identical |
| CAN/CSA-ISO/IEC/IEEE 8802-3:2018 | Identical |
| 17/30358185 DC : 0 | BS EN 61850-8-1+A1 - COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 8-1: SPECIFIC COMMUNICATION SERVICE MAPPING (SCSM) - MAPPINGS TO MMS (ISO 9506-1 AND ISO 9506-2) AND TO ISO/IEC 8802-3 |
| BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
| BS ISO/IEC 14543-5-7:2015 | Information technology. Home electronic system (HES) architecture Intelligent grouping and resource sharing for HES Class 2 and Class 3. Remote access system architecture |
| IEC 61643-351:2016 | Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
| IEC 62439-2:2016 | Industrial communication networks - High availability automation networks - Part 2: Media Redundancy Protocol (MRP) |
| IEC 61800-7-304:2015 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 61800-7-304:2016 | Adjustable speed electrical power drive systems - Part 7-304: Generic interface and use of profiles for power drive systems - Mapping of profile type 4 to network technologies |
| EN 62657-1:2017 | Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations |
| BS EN 61800-7-304:2016 | Adjustable speed electrical power drive systems Generic interface and use of profiles for power drive systems. Mapping of profile type 4 to network technologies |
| EN 61643-351:2017 | Components for low-voltage surge protective devices - Part 351: Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
| I.S. EN 60793-2-10:2017 | OPTICAL FIBRES - PART 2-10: PRODUCT SPECIFICATIONS - SECTIONAL SPECIFICATION FOR CATEGORY A1 MULTIMODE FIBRE |
| 15/30293986 DC : 0 | BS EN 62056-8-6 - ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-6 - HIGH SPEED PLC ISO/IEC 12139-1 PROFILE FOR NEIGHBOURHOOD NETWORKS |
| BS EN 50463-4:2017 | Railway applications. Energy measurement on board trains Communication |
| BS ISO 11898-1:2015 | Road vehicles. Controller area network (CAN) Data link layer and physical signalling |
| BS ISO/IEC 14543-5-8:2017 | Information technology. Home electronic systems (HES) architecture Intelligent grouping and resource sharing for HES Class 2 and Class 3. Remote access core protocol |
| ISO/IEC 14543-5-7:2015 | Information technology Home electronic system (HES) architecture Part 5-7: Intelligent grouping and 3 resource sharing Remote access system architecture |
| ISO/IEC 14543-5-11:2018 | Information technology Home electronic systems (HES) architecture Part 5-11: Intelligent Grouping and Resource Sharing for HES Class 2 and Class 3 Remote user interface |
| I.S. EN 61643-351:2017 | COMPONENTS FOR LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 351: PERFORMANCE REQUIREMENTS AND TEST METHODS FOR TELECOMMUNICATIONS AND SIGNALLING NETWORK SURGE ISOLATION TRANSFORMERS (SIT) |
| I.S. EN IEC 62439-5:2018 | INDUSTRIAL COMMUNICATION NETWORKS - HIGH AVAILABILITY AUTOMATION NETWORKS - PART 5: BEACON REDUNDANCY PROTOCOL (BRP) |
| EN IEC 62439-5:2018 | Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) |
| IEC 62439-3:2016 | Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
| I.S. EN IEC 62439-3:2018 | INDUSTRIAL COMMUNICATION NETWORKS - HIGH AVAILABILITY AUTOMATION NETWORKS - PART 3: PARALLEL REDUNDANCY PROTOCOL (PRP) AND HIGH-AVAILABILITY SEAMLESS REDUNDANCY (HSR) |
| EN IEC 62439-3:2018 | Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
| CEI EN 62056-8-6 : 1ED 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-6: HIGH SPEED PLC ISO/IEC 12139-1 PROFILE FOR NEIGHBOURHOOD NETWORKS |
| IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 62657-1:2017 | Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations |
| IEC 62056-8-6:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 8-6: High speed PLC ISO/IEC 12139-1 profile for neighbourhood networks |
| IEC 61869-9:2016 | Instrument transformers - Part 9: Digital interface for instrument transformers |
| ISO/IEC TS 29125:2017 | Information technology — Telecommunications cabling requirements for remote powering of terminal equipment |
| 16/30344496 DC : 0 | BS EN 61850-9-2+A1 - COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION - PART 9-2: SPECIFIC COMMUNICATION SERVICE MAPPING (SCSM) - SAMPLED VALUES OVER ISO/IEC 8802-3 |
| ISO/IEC TR 11801-9905:2018 | Information technology Generic cabling systems for customer premises Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application |
| NF EN 62056-8-6 : 2017 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 8-6: HIGH SPEED PLC ISO/IEC 12139-1 PROFILE FOR NEIGHBOURHOOD NETWORKS |
| ISO/IEC 30100-2:2016 | Information technology Home network resource management Part 2: Architecture |
| EN 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| BS EN 60793-2-10:2017 | Optical fibres Product specifications. Sectional specification for category A1 multimode fibres |
| ISO 11898-1:2015 | Road vehicles — Controller area network (CAN) — Part 1: Data link layer and physical signalling |
| IEC 62439-5:2016 | Industrial communication networks - High availability automation networks - Part 5: Beacon Redundancy Protocol (BRP) |
| I.S. EN 61800-7-304:2016 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 7-304: GENERIC INTERFACE AND USE OF PROFILES FOR POWER DRIVE SYSTEMS - MAPPING OF PROFILE TYPE 4 TO NETWORK TECHNOLOGIES |
| BS EN 61643-351:2017 | Components for low-voltage surge protective devices Performance requirements and test methods for telecommunications and signalling network surge isolation transformers (SIT) |
| EN 62439-2:2017/AC:2018-06 | INDUSTRIAL COMMUNICATION NETWORKS - HIGH AVAILABILITY AUTOMATION NETWORKS - PART 2: MEDIA REDUNDANCY PROTOCOL (MRP) (IEC 62439-2:2016) |
| EN 50463-4:2017 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| ISO/IEC 14543-5-8:2017 | Information technology Home electronic systems (HES) architecture Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 Remote access core protocol |
| BS EN 62657-1:2017 | Industrial communication networks. Wireless communication networks Wireless communication requirements and spectrum considerations |
| I.S. EN 62657-1:2017 | INDUSTRIAL COMMUNICATION NETWORKS - WIRELESS COMMUNICATION NETWORKS - PART 1: WIRELESS COMMUNICATION REQUIREMENTS AND SPECTRUM CONSIDERATIONS |
| IEC 62888-4:2018 | Railway applications - Energy measurement on board trains - Part 4: Communication |
| ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
| I.S. EN 50463-4:2017 | RAILWAY APPLICATIONS - ENERGY MEASUREMENT ON BOARD TRAINS - PART 4: COMMUNICATION |
| IEC 62439-3:2016 RLV | Industrial communication networks - High availability automation networks - Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) |
| CAN/CSA-ISO/IEC 30100-2:18 | Information technology — Home network resource management — Part 2: Architecture (Adopted ISO/IEC 30100-2:2016, first edition, 2016-04) |
| IEC 61076-3-101:1997 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 3: Rectangular connectors - Section 101: Detail specification for a range of shielded connectors with trapezoidal shaped shells and non-removable rectangular contacts on a 1,27 mm x 2,54 mm centre-line |
| IEC 60874-10:1992 | Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector type BFOC/2,5 |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| EN 300 019-1-3 : 2.4.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-3: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT WEATHERPROTECTED LOCATIONS |
| IEC 60825-2:2004+AMD1:2006+AMD2:2010 CSV | Safety of laser products - Part 2: Safety of optical fibre communication systems (OFCS) |
| SAE J1292 : 2008(S2016) | AUTOMOBILE AND MOTOR COACH WIRING |
| ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
| IEC 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| IEC 61753-1-1:2000 | Fibre optic interconnecting devices and passive components performance standard - Part 1-1: General and guidance - Interconnecting devices (connectors) |
| IEC 60807-3:1990 | Rectangular connectors for frequencies below 3 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp contact types with closed crimp barrels, rear insertion/rear extraction |
| IEC 61280-1-3:2010 | Fibre optic communication subsystem test procedures - Part 1-3: General communication subsystems - Central wavelength and spectral width measurement |
| ASTM D 4728 : 2017 : REDLINE | Standard Test Method for Random Vibration Testing of Shipping Containers |
| ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
| ISO 16750-5:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
| IEC 60793-2-10:2017 | Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres |
| IEC 60794-2-11:2012 | Optical fibre cables - Part 2-11: Indoor optical fibre cables - Detailed specification for simplex and duplex cables for use in premises cabling |
| IEC 60793-1-41:2010 | Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth |
| GR 487 CORE : ISSUE 5 | GENERIC REQUIREMENTS FOR ELECTRONIC EQUIPMENT CABINETS |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
| IEC 60950:1999 | Safety of information technology equipment |
| IEEE 802.1AX-2014 | IEEE Standard for Local and metropolitan area networks -- Link Aggregation |
| IEC 61967-1:2002 | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 1: General conditions and definitions |
| TIA 568-0 : D2015 AMD 1 2017 | GENERIC TELECOMMUNICATIONS CABLING FOR CUSTOMER PREMISES |
| IEC 60793-1-4:2001 | Optical fibres - Part 1-4: Generic specification - Measuring methods for transmission and optical characteristics |
| IEEE 802-2014 | IEEE Standard for Local and Metropolitan Area Networks: Overview and Architecture |
| IEC 60794-1:1996 | Optical fibre cables - Part1: Generic specification (Revision to IEC 794-1) |
| IEC 60793-2:2015 | Optical fibres - Part 2: Product specifications - General |
| ISO/IEC 10165-2:1992 | Information technology Open Systems Interconnection Structure of management information: Definition of management information |
| IEC 60794-3-12:2012 | Optical fibre cables - Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling |
| IEEE 802.1AS-2011 | IEEE Standard for Local and Metropolitan Area Networks - Timing and Synchronization for Time-Sensitive Applications in Bridged Local Area Networks |
| ISO 8820-1:2014 | Road vehicles Fuse-links Part 1: Definitions and general test requirements |
| IEC 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| TIA/EIA 455-204 : A2013 | MEASUREMENT OF BANDWIDTH ON MULTIMODE FIBER |
| MIL C 17 : G | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| IEC 60874-2:1993 | Connectors for optical fibres and cables - Part 2: Sectional specification for fibre optic connector - Type F-SMA |
| TIA/EIA 455-180 : A1999(R2008) | MEASUREMENT OF THE OPTICAL TRANSFER COEFFICIENTS OF A PASSIVE BRANCHING DEVICE (COUPLER) |
| ATIS 0600416 : 1999 | NETWORK TO CUSTOMER INSTALLATION INTERFACES - SYNCHRONOUS OPTICAL NETWORK (SONET) PHYSICAL LAYER SPECIFICATION: COMMON CRITERIA |
| TIA/EIA 568-2 : C2009 AMD 1 2016 | COMMERCIAL BUILDING TELECOMMUNICATIONS CABLING STANDARD - PART 2: BALANCED TWISTED-PAIR TELECOMMUNICATIONS CABLING AND COMPONENTS STANDARDS |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| TIA 455-95 : A2000(R2005) | FOTP-95 - ABSOLUTE OPTICAL POWER TEST FOR OPTICAL FIBERS AND CABLES |
| IEC 60793-1:1992 | Optical fibres - Part 1: Generic specification |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| ISO/IEC 10040:1998 | Information technology Open Systems Interconnection Systems management overview |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| ISO/IEC 9646-2:1994 | Information technology Open Systems Interconnection Conformance testing methodology and framework Part 2: Abstract Test Suite specification |
| MIL C 24308 : C | CONNECTORS, ELECTRIC, RECTANGULAR, NON-ENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| TIA 455-30 : B1991 | FREQUENCY DOMAIN MEASUREMENT OF MULTIMODE OPTICAL FIBER INFORMATION TRANSMISSION CAPACITY |
| IEC 61753-1:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards |
| IEC 60793-1-42:2013 | Optical fibres - Part 1-42: Measurement methods and test procedures - Chromatic dispersion |
| IEEE 802.1D-2004 | IEEE Standard for Local and metropolitan area networks: Media Access Control (MAC) Bridges |
| TIA 455-175 : B2003 | OPTICAL FIBRES - PART 1-42: MEASUREMENT METHODS AND TEST PROCEDURES CHROMATIC DEPRESSION |
| ANSI INCITS 450 : 2009 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - PHYSICAL INTERFACE-4 (FC-PI-4) |
| TIA TSB 155 : A2010(R2014) | GUIDELINES FOR THE ASSESSMENT AND MITIGATION OF INSTALLED CATEGORY 6 CABLING TO SUPPORT 10 G BASE-T |
| ISO/IEC 8824:1990 | Information technology — Open Systems Interconnection — Specification of Abstract Syntax Notation One (ASN.1) |
| ISO 20653:2013 | Road vehicles — Degrees of protection (IP code) — Protection of electrical equipment against foreign objects, water and access |
| IEC 62132-1:2015 | Integrated circuits - Measurement of electromagnetic immunity - Part 1: General conditions and definitions |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEEE 802.3.1-2013 | IEEE Standard for Management Information Base (MIB) Definitions for Ethernet |
| ISO/IEC TR 29125:2010 | Information technology Telecommunications cabling requirements for remote powering of terminal equipment |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| ECMA 97 : 1992 | LOCAL AREA NETWORKS - SAFETY REQUIREMENTS |
| IEC 61280-1-1:2013 | Fibre optic communication subsystem basic test procedures - Part 1-1: Test procedures for general communication subsystems - Transmitter output optical power measurement for single-mode optical fibre cable |
| IEC 60721-2-1:2013 | Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity |
| ATIS 0900105 : 2015 | SYNCHRONOUS OPTICAL NETWORK (SONET) - BASIC DESCRIPTION INCLUDING MULTIPLEX STRUCTURE, RATES, AND FORMATS |
| IEC 61753-021-2:2007 | Fibre optic interconnecting devices and passive components performance standard - Part 021-2: Grade C/3 single-mode fibre optic connectors for category C - Controlled environment |
| ISO/IEC TR 24750:2007 | Information technology Assessment and mitigation of installed balanced cabling channels in order to support of 10GBASE-T |
| ISO 16750-3:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
| GR 468 CORE : ISSUE 2 | GENERIC RELIABILITY ASSURANCE REQUIREMENTS FOR OPTOELECTRONIC DEVICES USED IN TELECOMMUNICATIONS EQUIPMENT |
| ISO/IEC 15802-1:1995 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Common specifications Part 1: Medium Access Control (MAC) service definition |
| TIA/EIA 568-3 : D2016 | OPTICAL FIBER CABLING AND COMPONENTS STANDARD |
| IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| IEC 61280-4-1:2009 | Fibre-optic communication subsystem test procedures - Part 4-1: Installed cable plant - Multimode attenuation measurement |
| IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
| IEC 61967-4:2002+AMD1:2006 CSV | Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 4: Measurement of conducted emissions - 1 Ω/150 Ω direct coupling method |
| IEC 61280-2-2:2012 | Fibre optic communication subsystem test procedures - Part 2-2: Digital systems - Optical eye pattern, waveform and extinction ratio measurement |
| IEEE 802.1AB-2009 | IEEE Standard for Local and Metropolitan Area Networks-- Station and Media Access Control Connectivity Discovery |
| IEC 61753-022-2:2012 | Fibre optic interconnecting devices and passive components - Performance standard - Part 022-2: Fibre optic connectors terminated on multimode fibre for category C - Controlled environment |
| TIA/EIA 455-54 : B1998(R2013) | MODE SCRAMBLER REQUIREMENTS FOR OVERFILLED LAUNCHING CONDITIONS TO MULTIMODE FIBERS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| TIA TSB 184 : A2017 | GUIDELINES FOR SUPPORTING POWER DELIVERY OVER BALANCED TWISTED-PAIR CABLING |
| TIA/EIA 455-203 : A2009(R2014) | LIGHT SOURCE ENCIRCLED FLUX MEASUREMENT METHOD |
| TIA 526-14 : C2015 | OPTICAL POWER LOSS MEASUREMENTS OF INSTALLED MULTIMODE FIBER CABLE PLANT |
| IEC 62153-4-14:2012 | Metallic communication cable test methods - Part 4-14: Electromagnetic compatibility (EMC) - Coupling attenuation of cable assemblies (Field conditions) absorbing clamp method |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| TIA/EIA TSB 67 : 1995 | TRANSMISSION PERFORMANCE SPECIFICATIONS FOR FIELD TESTING OF UNSHIELDED TWISTED-PAIR CABLING SYSTEMS |
| ISO/IEC 9646-1:1994 | Information technology Open Systems Interconnection Conformance testing methodology and framework Part 1: General concepts |
| ISO/IEC 9314-3:1990 | Information processing systems Fibre distributed Data Interface (FDDI) Part 3: Physical Layer Medium Dependent (PMD) |
| IEC 61754-7-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7-1: Type MPO connector family - One fibre row |
| IEC 60794-2:2017 | Optical fibre cables - Part 2: Indoor cables - Sectional specification |
| EN 300 019-1-4 : 2.2.1 | ENVIRONMENTAL ENGINEERING (EE); ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT; PART 1-4: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS; STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS |
| TIA/EIA 455-34 : A1995(R2002) | INTERCONNECTION DEVICE INSERTION LOSS TEST |
| TIA 526-7 : A2015 | MEASUREMENT OF OPTICAL POWER LOSS OF INSTALLED SINGLE-MODE FIBER CABLE PLANT |
| TIA 455-127 : A2006(R2014) | FOTP-127-A - BASIC SPECTRAL CHARACTERIZATION OF LASER DIODES |
| IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
| ISO/IEC 7498-4:1989 | Information processing systems — Open Systems Interconnection — Basic Reference Model — Part 4: Management framework |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| IEEE 1588-2008 REDLINE | IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems |
| ISO/IEC 8802-2:1998 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 2: Logical link control |
| IEC 61754-4:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 4: Type SC connector family |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO/IEC 10165-4:1992 | Information technology Open Systems Interconnection Structure of management information Part 4: Guidelines for the definition of managed objects |
| IEC 62149-1:2011 | Fibre optic active components and devices - Performance standards - Part 1: General and guidance |
| IEC 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| TIA 455-51 : A1991 | PULSE DISTORTION MEASUREMENT OF MULTIMODE GLASS OPTICAL FIBER INFORMATION CAPACITY |
| IEC 61754-7:2008 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 7: Type MPO connector family |
| ISO 9314-2:1989 | Information processing systems — Fibre Distributed Data Interface (FDDI) — Part 2: Token Ring Media Access Control (MAC) |
| TIA TSB 5021 : 2017 | GUIDELINES FOR THE USE OF INSTALLED CATEGORY 5E AND CATEGORY 6 CABLING TO SUPPORT 2.5GBASE-T AND 5GBASE-T |
| IEC 61000-4-21:2011 | Electromagnetic compatibility (EMC) - Part 4-21: Testing and measurement techniques - Reverberation chamber test methods |
| TIA 526-4 : A1997 | OPTICAL EYE PATTERN MEASUREMENT PROCEDURE |
| ANSI INCITS TR 25 : 1999 | INFORMATION TECHNOLOGY - FIBRE CHANNEL - METHODOLOGIES FOR JITTER SPECIFICATION |
| IEC 61280-1-4:2009 | Fibre optic communication subsystem test procedures - Part 1-4: General communication subsystems - Light source encircled flux measurement method |
| IEC 61076-3-103:2003 | Connectors for electronic equipment - Part 3-103: Rectangular connectors - Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC) |
| TS 101 270-1 : 1.4.1 | TRANSMISSION AND MULTIPLEXING (TM); ACCESS TRANSMISSION SYSTEMS ON METALLIC ACCESS CABLES; VERY HIGH SPEED DIGITAL SUBSCRIBER LINE (VDSL); PART 1: FUNCTIONAL REQUIREMENTS |
| IEC 60793-1-48:2017 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.