ISO Guide 34:2009
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
General requirements for the competence of reference material producers
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
19-03-2019
Superseded by
Language(s)
English, Russian, French
Published date
20-11-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Guide 34:2009 specifies general requirements in accordance with which a reference material producer has to demonstrate that it operates, if it is to be recognized as competent to carry out the production of reference materials.
Guide 34:2009 is intended for the use by reference material producers in the development and implementation of their management system for quality, administrative and technical operations. Reference material customers, regulatory authorities and accreditation bodies may also use it in confirming and recognizing the competence of reference material producers.
Guide 34:2009 is not intended to be used as the basis for conformity assessment by certification bodies.
Guide 34:2009 sets out the management system requirements in accordance with which reference materials shall be produced. It is intended to be used as part of a reference material producer's general quality assurance (QA) procedures.
Guide 34:2009 covers the production of certified and non-certified reference materials. For non-certified reference materials, the production requirements are less stringent than for certified reference materials. The minimum requirements for the production of non-certified reference materials are specified throughout the Guide.
| DocumentType |
Guide
|
| Pages |
34
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| FD ISO GUIDE 34 : 2010 FD | Identical |
| NEN NPR ISO GUIDE 34 : 2009 | Identical |
| SAC GB/T 15000.7 : 2001 | Identical |
| PD ISO Guide 34:2009 | Identical |
| PD 6532-5:1997 | Identical |
| UNE-ISO GUIA 34:2014 IN | Identical |
| I.S. EN ISO 6142-1:2015 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES (ISO 6142-1:2015) |
| 10/30215322 DC : 0 | BS EN ISO 6974-1 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| 05/30136954 DC : 0 | EN 15309 - CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| ISO/TR 11773:2013 | Global distribution of reference materials |
| BS EN ISO/IEC 17043:2010 | Conformity assessment. General requirements for proficiency testing |
| BS EN 15309:2007 | Characterization of waste and soil. Determination of elemental composition by X-ray fluorescence |
| 11/30199166 DC : 0 | BS ISO 11952 - SURFACE CHEMICAL ANALYSIS - SCANNING PROBE MICROSCOPY - DETERMINATION OF GEOMETRIC QUANTITIES USING SPM - CALIBRATION OF MEASURING SYSTEMS |
| OIML D 18 : 2008 | THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES |
| 13/30272291 DC : 0 | BS ISO 18227 - SOIL QUALITY - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| 11/30214536 DC : 0 | BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| 03/300854 DC : DRAFT JAN 2003 | ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 07/30157023 DC : 0 | BS EN ISO 15194 - IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| 08/30182372 DC : DRAFT JULY 2008 | BS EN 15842 - FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| ECA ILAC P10 : 2013 | ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
| BS EN ISO 6142-1:2015 | Gas analysis. Preparation of calibration gas mixtures Gravimetric method for Class I mixtures |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| BS ISO 18227:2014 | Soil quality. Determination of elemental composition by X-ray fluorescence |
| ASTM E 1834 : 2011 | Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 2437 : 2005 | Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials (Withdrawn 2014) |
| PREN ISO 13736 : DRAFT 2011 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNE-EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM E 925 : 2009 | Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm |
| ASTM E 2594 : 2009 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| I.S. EN ISO 15194:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| EN ISO 5667-3:2012 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ASTM E 2594 : 2009 : R2014 | Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method) |
| ASTM E 2371 : 2013 | Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology) |
| DIN EN ISO 17932:2011-12 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| ISO 6974-1:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 1: General guidelines and calculation of composition |
| BS EN ISO 10993-12:2012 | Biological evaluation of medical devices Sample preparation and reference materials |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| UNE-EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| DIN EN ISO 13366-2:2007-01 | Milk - Enumeration of somatic cells - Part 2: Guidance on the operation of fluoro-opto-electronic counters (ISO 13366-2:2006) |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| DIN EN ISO 148-3:2017-04 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| EN ISO 148-3:2016 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| UNI EN ISO 10993-12 : 2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| ISO/TR 79:2015 | Reference materials - Examples of reference materials for qualitative properties |
| PD ISO/TR 13014:2012 | Nanotechnologies. Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| 10/30201950 DC : 0 | BS EN ISO 5667-3 - WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| BS ISO 14606:2015 | Surface chemical analysis. Sputter depth profiling. Optimization using layered systems as reference materials |
| 09/30179503 DC : DRAFT FEB 2009 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS GIVING A PERIODIC DIFFRACTION PATTERN |
| UNI EN 15842 : 2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 10/30203803 DC : 0 | BS ISO 6974-2 - NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| 03/300855 DC : DRAFT JAN 2003 | ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 2000-524(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 14/30250844 DC : 0 | BS EN ISO 6142-1 - GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS 1 MIXTURES |
| UNI CEN/TR 10317 : 2009 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION |
| DIN EN ISO 6142-1:2015-12 | GAS ANALYSIS - PREPARATION OF CALIBRATION GAS MIXTURES - PART 1: GRAVIMETRIC METHOD FOR CLASS I MIXTURES (ISO 6142-1:2015) |
| DIN EN 15842:2010-06 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| BS ISO 13322-1:2014 | Particle size analysis. Image analysis methods Static image analysis methods |
| BS 2000-170(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| BS ISO 16700:2004 | Microbeam analysis. Scanning electron microscopy. Guidelines for calibrating image magnification |
| ISO 13322-1:2014 | Particle size analysis — Image analysis methods — Part 1: Static image analysis methods |
| UNI EN ISO 5667-3 : 2013 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES |
| I.S. EN ISO 17932:2011 | PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT (ISO 17932:2011) |
| NF ISO 16700 : 2006 | MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| I.S. EN ISO 148-3:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| UNI EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| ASTM E 925 : 2009 : R2014 | Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm |
| DIN EN ISO 10993-12:2012-10 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| DIN EN ISO 6974-1:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| DIN EN ISO 6974-2:2012-11 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| BS EN ISO 13366-2:2006 | Milk. Enumeration of somatic cells Guidance on the operation of fluoro-opto-electronic counters |
| I.S. EN ISO 6974-1:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION (ISO 6974-1:2012) |
| I.S. EN ISO 10723:2012 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 13736:2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| I.S. EN ISO 13366-2:2006 | MILK - ENUMERATION OF SOMATIC CELLS - PART 2: GUIDANCE ON THE OPERATION OF FLUORO-OPTO-ELECTRONIC COUNTERS |
| I.S. EN ISO 6974-2:2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS (ISO 6974-2:2012) |
| DIN EN ISO 10723:2013-04 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS (ISO 10723:2012) |
| I.S. EN ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS (ISO 10993-12:2012) |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| I.S. EN ISO 3679:2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD (ISO 3679:2015) |
| PD 6532-2:2000 | Reference materials. Guide to the contents of certificates of reference materials Guide to the contents of certificates and labels of reference materials |
| 17/30346182 DC : 0 | BS ISO 29301 - MICROBEAM ANALYSIS - ANALYTICAL TRANSMISSION ELECTRON MICROSCOPY - METHODS FOR CALIBRATING IMAGE MAGNIFICATION BY USING REFERENCE MATERIALS HAVING PERIODIC STRUCTURES |
| ECA ILAC P14 : 2013 | ILAC POLICY FOR UNCERTAINTY IN CALIBRATION |
| BS EN ISO 2592:2017 | Petroleum and related products. Determination of flash and fire points. Cleveland open cup method |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| I.S. EN ISO 3680:2004 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS EN 16682:2017 | Conservation of cultural heritage. Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| PD ISO/TR 79:2015 | Reference materials. Examples of reference materials for qualitative properties |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| BS EN 15842:2010 | Foodstuffs. Detection of food allergens. General considerations and validation of methods |
| BS 2000-523(2015) : 2015 | DETERMINATION OF FLASH NO-FLASH AND FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| PD CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ASTM E 3131 : 2017 | Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders |
| S.R. CEN/TR 10317:2014 | EUROPEAN CERTIFIED REFERENCE MATERIALS (EURONORM-CRMS) FOR THE DETERMINATION OF THE CHEMICAL COMPOSITION OF IRON AND STEEL PRODUCTS PREPARED UNDER THE AUSPICES OF THE EUROPEAN COMMITTEE FOR IRON AND STEEL STANDARDIZATION (ECISS) |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| ASTM D 7911 : 2014 | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| UNI CEI EN ISO/IEC 17043 : 2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| BS EN ISO 5667-3:2012 | Water quality. Sampling Preservation and handling of water samples |
| DIN EN ISO 3679:2015-06 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| UNE-EN ISO 6974-2:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNE-EN ISO 6974-1:2013 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) |
| BS EN ISO 3680:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| UNE-EN ISO 6142-1:2016 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| EN ISO 6974-2:2012 | Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) |
| UNI EN ISO 6974-2 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 2: UNCERTAINTY CALCULATIONS |
| UNI EN ISO 6974-1 : 2012 | NATURAL GAS - DETERMINATION OF COMPOSITION AND ASSOCIATED UNCERTAINTY BY GAS CHROMATOGRAPHY - PART 1: GENERAL GUIDELINES AND CALCULATION OF COMPOSITION |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNI EN ISO 10723 : 2013 | NATURAL GAS - PERFORMANCE EVALUATION FOR ANALYTICAL SYSTEMS |
| UNE-EN ISO 148-3:2017 | Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016) |
| DIN EN ISO 148-3:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 3: PREPARATION AND CHARACTERIZATION OF CHARPY V-NOTCH TEST PIECES FOR INDIRECT VERIFICATION OF PENDULUM IMPACT MACHINES (ISO 148-3:2016) |
| BS EN ISO 15194:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for certified reference materials and the content of supporting documentation |
| I.S. EN ISO/IEC 17043:2010 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| PD ISO/TR 11773:2013 | Global distribution of reference materials |
| PD ISO/TR 16476:2016 | Reference materials. Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| 12/30271500 DC : 0 | BS ISO GUIDE 80 - GUIDANCE FOR IN-HOUSE PRODUCTION OF REFERENCE MATERIALS FOR QUALITY CONTROL (QCMS) |
| UNE-EN ISO 5667-3:2013 | Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) |
| ISO 11952:2014 | Surface chemical analysis Scanning-probe microscopy Determination of geometric quantities using SPM: Calibration of measuring systems |
| DIN EN ISO 15194:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| BS EN ISO 148-3:2016 | Metallic materials. Charpy pendulum impact test Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| ISO/TR 16476:2016 | Reference materials — Establishing and expressing metrological traceability of quantity values assigned to reference materials |
| CEN/TR 10317:2014 | European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products prepared under the auspices of the European Committee for Iron and Steel Standardization (ECISS) |
| I.S. EN 15842:2010 | FOODSTUFFS - DETECTION OF FOOD ALLERGENS - GENERAL CONSIDERATIONS AND VALIDATION OF METHODS |
| 14/30316056 DC : 0 | BS ISO/GUIDE 31 - REFERENCE MATERIALS - CONTENTS OF CERTIFICATES, LABELS AND ACCOMPANYING DOCUMENTATION |
| 15/30317578 DC : 0 | BS ISO 16700 - MICROBEAM ANALYSIS - SCANNING ELECTRON MICROSCOPY - GUIDELINES FOR CALIBRATING IMAGE MAGNIFICATION |
| PD ISO GUIDE 30:2015 | Reference materials. Selected terms and definitions |
| 16/30325304 DC : 0 | BS EN ISO 2592 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| ISO 16700:2016 | Microbeam analysis — Scanning electron microscopy — Guidelines for calibrating image magnification |
| BS 2000-34(2002) : 2002 AMD 15248 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| ASTM D 6808 : 2002 : R2012 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| 13/30285144 DC : 0 | BS ISO 3679 - DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| 04/30126703 DC : DRAFT DEC 2004 | ISO 13366-2 - MILK - ENUMERATION OF SOMATIC CELLS - PART 2: ELECTRONIC PARTICLE COUNTER METHOD |
| 09/30195571 DC : 0 | BS EN ISO 12677 - CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS BY X-RAY FLUORESCENCE (XRF) - FUSED CAST-BEAD METHOD |
| BS 2000-170(2013) : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| BS 2000-36(2002) : 2002 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| DIN EN 16682:2016-01 (Draft) | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| I.S. EN ISO 2592:2017 | PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF FLASH AND FIRE POINTS - CLEVELAND OPEN CUP METHOD (ISO 2592:2017) |
| NF EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| I.S. EN 16682:2017 | CONSERVATION OF CULTURAL HERITAGE - METHODS OF MEASUREMENT OF MOISTURE CONTENT, OR WATER CONTENT, IN MATERIALS CONSTITUTING IMMOVABLE CULTURAL HERITAGE |
| DIN EN ISO 5667-3:2013-03 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
| ASTM D 6808 : 2002 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM D 7345 : 2017 : REDLINE | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
| I.S. EN ISO 5667-3:2012 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
| I.S. EN 15309:2007 | CHARACTERIZATION OF WASTE AND SOIL - DETERMINATION OF ELEMENTAL COMPOSITION BY X-RAY FLUORESCENCE |
| ISO/TS 16195:2013 | Nanotechnologies Guidance for developing representative test materials consisting of nano-objects in dry powder form |
| DIN EN ISO 13736:2013-08 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| ISO 3679:2015 | Determination of flash no-flash and flash point — Rapid equilibrium closed cup method |
| BS EN ISO 17932:2011 | Palm oil. Determination of the deterioration of bleachability index (DOBI) and carotene content |
| BS EN ISO 13736:2008 | Determination of flash point. Abel closed-cup method |
| BS EN ISO 6974-2:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography Uncertainty calculations |
| ISO 17932:2011 | Palm oil Determination of the deterioration of bleachability index (DOBI) and carotene content |
| ISO 6142-1:2015 | Gas analysis Preparation of calibration gas mixtures Part 1: Gravimetric method for Class I mixtures |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| BS EN ISO 3679:2015 | Determination of flash no-flash and flash point. Rapid equilibrium closed cup method |
| UNE-EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| UNE-EN ISO 10993-12:2013 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| ISO 10993-12:2012 | Biological evaluation of medical devices Part 12: Sample preparation and reference materials |
| UNE-EN ISO 10723:2013 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| ISO 10723:2012 | Natural gas — Performance evaluation for analytical systems |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| UNE-EN ISO 17932:2012 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| ISO 6974-2:2012 | Natural gas — Determination of composition and associated uncertainty by gas chromatography — Part 2: Uncertainty calculations |
| BS EN ISO 6974-1:2012 | Natural gas. Determination of composition and associated uncertainty by gas chromatography General guidelines and calculation of composition |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| ISO 13366-2:2006 | Milk Enumeration of somatic cells Part 2: Guidance on the operation of fluoro-opto-electronic counters |
| BS EN ISO 10723:2012 | Natural gas. Performance evaluation for analytical systems |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| DIN EN ISO/IEC 17043:2010-05 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN ISO 17932:2011 | Palm oil - Determination of the deterioration of bleachability index (DOBI) and carotene content (ISO 17932:2011) |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
| EN ISO 10723:2012 | Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) |
| EN 16682:2017 | Conservation of cultural heritage - Methods of measurement of moisture content, or water content, in materials constituting immovable cultural heritage |
| EN 15309:2007 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| EN ISO 6142-1:2015 | Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) |
| EN ISO/IEC 17043:2010 | Conformity assessment - General requirements for proficiency testing (ISO/IEC 17043:2010) |
| EN 15842:2010 | Foodstuffs - Detection of food allergens - General considerations and validation of methods |
| EN ISO 15194:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for certified reference materials and the content of supporting documentation (ISO 15194:2009) |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| 06/30138176 DC : 0 | EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| 04/30105010 DC : DRAFT JUL 2004 | ISO 12156-1 - DIESEL FUEL - ASSESSMENT OF LUBRICITY USING THE HIGH-FREQUENCY RECIPROCATING RIG (HFRR) - PART 1: TEST METHOD |
| DIN EN 15309:2007-08 | Characterization of waste and soil - Determination of elemental composition by X-ray fluorescence |
| ISO 18227:2014 | Soil quality — Determination of elemental composition by X-ray fluorescence |
| UNI EN ISO 17932 : 2011 | PALM OIL - DETERMINATION OF THE DETERIORATION OF BLEACHABILITY INDEX (DOBI) AND CAROTENE CONTENT |
| BS 2000-523(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-523: DETERMINATION OF FLASH POINT - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| ISO 14606:2015 | Surface chemical analysis — Sputter depth profiling — Optimization using layered systems as reference materials |
| ISO/TR 13014:2012 | Nanotechnologies Guidance on physico-chemical characterization of engineered nanoscale materials for toxicologic assessment |
| CEI UNI EN ISO/IEC 17043 : 2011 | CONFORMITY ASSESSMENT - GENERAL REQUIREMENTS FOR PROFICIENCY TESTING |
| EN ISO 10993-12:2012 | Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| PD ISO GUIDE 31:2015 | Reference materials. Contents of certificates, labels and accompanying documentation |
| UNI EN ISO 15194 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CERTIFIED REFERENCE MATERIALS AND THE CONTENT OF SUPPORTING DOCUMENTATION |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ANSI/AAMI/ISO 10993-12:2012 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| ASTM D 6808 : 2002 : R2007 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ISO 15194:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for certified reference materials and the content of supporting documentation |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| ISO 148-3:2016 | Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines |
| DIN EN ISO 3680:2004-07 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO/IEC 17000:2004 | Conformity assessment Vocabulary and general principles |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| CLSI EP14 A2 : 2ED 2005 | EVALUATION OF MATRIX EFFECTS |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 17511:2003 | In vitro diagnostic medical devices Measurement of quantities in biological samples Metrological traceability of values assigned to calibrators and control materials |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| CLSI EP32 R : 1ED 2006 | METROLOGICAL TRACEABILITY AND ITS IMPLEMENTATION |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 9001:2015 | Quality management systems — Requirements |
| CLSI C53 P : 1ED 2008 | CHARACTERIZATION AND QUALIFICATION OF COMMUTABLE REFERENCE MATERIALS FOR LABORATORY MEDICINE |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ECA ILAC G12 : 2000 | GUIDELINES FOR THE REQUIREMENTS FOR THE COMPETENCE OF REFERENCE MATERIALS PRODUCERS |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| ECA ILAC G24 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| ECA ILAC P10 : 2013 | ILAC POLICY ON TRACEABILITY OF MEASUREMENT RESULTS |
| OIML D 10 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.