ISO 8779:2010
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics piping systems Polyethylene (PE) pipes for irrigation Specifications
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
17-08-2020
Superseded by
Published date
23-02-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 8779:2010 specifies the pipes (mains, sub-mains and laterals) with nominal outside diameters from 12 mm up to and including 63 mm made from polyethylene (PE) intended to be used for the conveyance of water for irrigation.
It also specifies the general properties of PE and the test parameters for the pipes designated as PE 32 and PE 40 by checking referenced points, to be used under the following conditions:
- nominal pressures of PN 2,5, PN 4, PN 6, PN 8 and PN 10, as applicable,
- at temperatures up to and including 45 C.
| DevelopmentNote |
DRAFT ISO/DIS 8779 is also available for this standard. (06/2017)
|
| DocumentType |
Standard
|
| Pages |
14
|
| ProductNote |
THIS STANDARD ALSO REFERS-SI 499
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 8779 : 2010 | Identical |
| BS ISO 8779 : 2010 | Identical |
| DIN EN ISO 9261:2010-05 | Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004) |
| UNI EN 15014 : 2008 | PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND SYSTEMS FOR WATER AND OTHER FLUIDS UNDER PRESSURE - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| 11/30239906 DC : 0 | BS EN 15014 - PLASTICS PIPING SYSTEMS - BURIED AND ABOVE GROUND PIPING COMPONENTS FOR WATER AND OTHER LIQUIDS UNDER PRESSURE - REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR PIPES AND FITTINGS |
| 03/102084 DC : DRAFT JAN 2003 | ISO 8796 - POLYETHYLENE PE 32 AND PE 40 PIPES FOR IRRIGATION LATERALS - SUSCEPTIBILITY TO ENVIRONMENTAL STRESS CRACKING INDUCED BY INSERT-TYPE FITTINGS - TEST METHOD AND SPECIFICATION |
| BS EN 15014:2007 | Plastics piping systems. Buried and above ground systems for water and other fluids under pressure. Performance characteristics for pipes, fittings and their joints |
| BS EN ISO 9261:2010 | Agricultural irrigation equipment. Emitters and emitting pipe. Specification and test methods |
| BS ISO 13460-1:2015 | Agricultural irrigation equipment. Plastics saddles Polyethylene pressure pipes |
| 14/30299370 DC : 0 | BS ISO 13460-1 - AGRICULTURAL IRRIGATION EQUIPMENT - PLASTICS SADDLES - PART 1: POLYETHYLENE PRESSURE PIPES |
| ISO 13460:1998 | Agricultural irrigation equipment Plastics saddles for polyethylene pressure pipes |
| ISO 13460-1:2015 | Agricultural irrigation equipment Plastics saddles Part 1: Polyethylene pressure pipes |
| BS EN 12734:2000 | Irrigation techniques. Quick coupling pipes for movable irrigation supply. Technical characteristics and testing |
| ISO 17885:2015 | Plastics piping systems Mechanical fittings for pressure piping systems Specifications |
| ISO 9261:2004 | Agricultural irrigation equipment — Emitters and emitting pipe — Specification and test methods |
| UNI EN ISO 9261 : 2010 | AGRICULTURAL IRRIGATION EQUIPMENT - EMITTERS AND EMITTING PIPE - SPECIFICATION AND TEST METHODS |
| 04/30126154 DC : DRAFT NOV 2004 | EN 15098 - IRRIGATION TECHNIQUES - LOCALISED IRRIGATION - EMITTING DEVICES, CHARACTERISTICS AND TEST METHODS |
| BS ISO 9261:2003 | Agricurltural irrigation equipment. Emitters and emitting pipe. Specification and test methods |
| ISO 8796:2004 | Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements |
| BS EN 12325-2:1999 | Irrigation techniques. Centre pivot and moving lateral systems Minimum performances and technical characteristics |
| ISO 9260:1991 | Agricultural irrigation equipment Emitters Specification and test methods |
| I.S. EN ISO 9261:2010 | AGRICULTURAL IRRIGATION EQUIPMENT - EMITTERS AND EMITTING PIPE - SPECIFICATION AND TEST METHODS |
| EN 15014:2007 | Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints |
| EN ISO 9261:2010 | Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test methods (ISO 9261:2004) |
| BS 7605-1:1992 | Agricultural irrigation equipment Specification for emitters |
| BS ISO 17885:2015 | Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications |
| EN 12734:2000 | Irrigation techniques - Quick coupling pipes for movable irrigation supply - Technical characteristics and testing |
| ISO 8796:2004 | Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements |
| ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces |
| ISO 6964:1986 | Polyolefin pipes and fittings Determination of carbon black content by calcination and pyrolysis Test method and basic specification |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 18553:2002 | Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds |
| CEN/TR 15438:2007 | Plastics piping systems - Guidance for coding of products and their intended uses |
| ISO 3126:2005 | Plastics piping systems Plastics components Determination of dimensions |
| ISO 11922-1:1997 | Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 1: Metric series |
| ISO 11357-6:2008 | Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) |
| UNE 53367:2005 | Plastics. PE 32 and PE 40 pipes for irrigation. Characteristics and test methods. |
| ISO 4065:1996 | Thermoplastics pipes Universal wall thickness table |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
| ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method |
| ISO 2505:2005 | Thermoplastics pipes — Longitudinal reversion — Test method and parameters |
| ISO 4427-2:2007 | Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.