ISO 8504-2:2000
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
02-11-2019
Superseded by
Language(s)
English, French
Published date
09-03-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also contains information on the effectiveness of the individual methods and their fields of application.
ISO 8504 is applicable to new and corroded steel surfaces and to steel surfaces that are uncoated or have been previously coated with paints and related products. For limitations, see note 2.
NOTE 1 These methods are essentially intended for hot-rolled steel to remove mill scale, rust, etc., but could also be used for cold-rolled steel of sufficient thickness to withstand the deformation caused by the impact of abrasive.
NOTE 2 There are several items that should be included in the purchaser's procurement documents to supplement this part of ISO 8504. Items that should be considered as a part of surface preparation before coating are edge grinding, removal of grease and oil, porosity of welds, removal of weld spatter, removal of burrs and other sharp edges, grinding of welds, filling of pits and other surface imperfections that may cause premature failure of the coating system (see ISO 8501-3 for more information) and the removal of water-soluble contaminants.
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| AS 1627.4-2002 | Identical |
| NF EN ISO 8504-2 : 2001 | Identical |
| NBN EN ISO 8504-2 : 2001 | Identical |
| NEN EN ISO 8504-2 : 2001 | Identical |
| NEN ISO 8504-2 : 2000 | Identical |
| NS EN ISO 8504-2 : 1ED 2001 | Identical |
| I.S. EN ISO 8504-2:2001 | Identical |
| PN EN ISO 8504-2 : 2002 | Identical |
| UNI EN ISO 8504-2 : 2001 | Identical |
| AS 1627.4-2005 | Identical |
| SS-EN ISO 8504-2:2001 | Identical |
| BS 7079-D2:1993 | Identical |
| BS EN ISO 8504-2:2001 | Identical |
| EN ISO 8504-2:2001 | Identical |
| DIN EN ISO 8504-2:2002-01 | Identical |
| ONORM EN ISO 8504-2 : 2001 | Identical |
| BS 7079-D2(2000) : 2000 AMD 13361 | Identical |
| UNE-EN ISO 8504-2:2002 | Identical |
| 14/30266796 DC : 0 | BS EN ISO 1514 - PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| BS 7079-C2(1989) : 1989 AMD 8661 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVELY BLAST CLEANED STEEL USING A COMPARATOR |
| BS EN 3021:2017 | Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification |
| BS 7079-C1(1989) : 1989 AMD 8652 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST CLEANED STEEL SUBSTRATES - SPECIFICATION FOR SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| NORSOK M 501 : REV 6 | SURFACE PREPARATION AND PROTECTIVE COATING |
| BS 7079-C5(2003) : 2003 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| PREN 3021 : DRAFT 2015 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| I.S. EN ISO 8501-1:2007 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 1: RUST GRADES AND PREPARATION GRADES OF UNCOATED STEEL SUBSTRATES AND OF STEEL SUBSTRATES AFTER OVERALL REMOVAL OF PREVIOUS COATINGS |
| ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
| UNE-EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| BS EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| BS 7079-C4(1989) : 1989 AMD 8654 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS & RELATED PRODUCTS - METHOD FOR THE CALIBRATION DETERMINATION OF SURFACE PROFILE USING A STYLUS INSTRUMENT |
| I.S. EN ISO 11126-10:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 10: ALMANDITE GARNET (ISO 11126-10:2017) |
| BS 7079-0:1990 | Preparation of steel substrates before application of paints and related products Introduction |
| EN ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017) |
| DIN EN ISO 8503-2:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| BS EN ISO 1514:2004 | Paints and varnishes. Standard panels for testing |
| BS EN ISO 8503-4:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| I.S. EN ISO 8503-3:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 3: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - FOCUSING MICROSCOPE PROCEDURE (ISO 8503-3:2012) |
| I.S. EN ISO 8503-1:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012) |
| I.S. EN ISO 8503-4:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012) |
| I.S. EN ISO 1514:2016 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
| I.S. EN ISO 8503-5:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE (ISO 8503-5:2017) |
| I.S. EN ISO 8503-2:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE (ISO 8503-2:2012) |
| BS 3900-A3(2004) : 2004 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING |
| BS 7079-D1(2000) : 2000 AMD 13360 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D1: GENERAL PRINCIPLES |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS ISO 8503-5 : 2003 AMD 15516 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| ISO 11126-10:2017 | Preparation of steel substrates before application of paints and related products — Specifications for non-metallic blast-cleaning abrasives — Part 10: Almandite garnet |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| NFP 22 501-1 : 98 XP | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
| UNE-EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| EN ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
| UNI EN ISO 8503-1 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES |
| UNI EN ISO 8503-4 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE |
| UNI EN ISO 8503-2 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE |
| UNI EN ISO 8503-3 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 3: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - FOCUSING MICROSCOPE PROCEDURE |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| DD ENV 1090-1:1998 | Execution of steel structures General rules and rules for buildings (together with United Kingdom national application document) |
| 15/30296437 DC : 0 | BS EN ISO 11126-10 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 10: ALMANDITE GARNET |
| BS 7079-D1:1993 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation General principles |
| I.S. EN 3021:2017 | AEROSPACE SERIES - MOLYBDENUM DISULPHIDE DRY FILM LUBRICANTS GRAPHITE AND HALOGEN FREE - TECHNICAL SPECIFICATION |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| UNE-EN ISO 1514:2017 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| UNE-EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| UNE-EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| BS EN ISO 8503-3:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| EN ISO 8504-1:2001 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) |
| EN 3021:2017 | Aerospace series - Molybdenum disulphide dry film lubricants graphite and halogen free - Technical specification |
| 17/30347632 DC : 0 | BS EN ISO 11126-8 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES - PART 8: OLIVINE |
| BS 7079-C3(1989) : 1989 AMD 8653 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHOD FOR THE SURFACE CALIBRATION OF SURFACE PROFILE COMPARATORS AND |
| DD ISO/TS 24817 : 2006 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| 16/30337296 DC : 0 | BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
| 14/30250433 DC : 0 | BS EN ISO 8503-5 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| BS EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries. External corrosion protection of risers by coatings and linings Elastomeric coating systems-polychloroprene or EPDM |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| ISO 10464:2004 | Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing |
| AEP-59 : 2009 | APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE |
| I.S. EN ISO 8504-1:2001 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 1: GENERAL PRINCIPLES |
| BS EN ISO 8504-1:2001 | Preparation of steel substrates before application of paints and related products. Surface preparation methods General principles |
| DIN EN ISO 8503-4:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| DIN EN ISO 8503-3:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
| DIN EN ISO 8503-5:2005-03 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE (ISO 8503-5:2017) |
| DIN EN ISO 8503-1:2013-05 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 1: SPECIFICATIONS AND DEFINITIONS FOR ISO SURFACE PROFILE COMPARATORS FOR THE ASSESSMENT OF ABRASIVE BLAST-CLEANED SURFACES (ISO 8503-1:2012) |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| BS EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Replica tape method for the determination of the surface profile |
| BS EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| PIP CTSL1000 : 2017 | APPLICATION OF INTERNAL LININGS |
| PIP CTSU1000 : 2018 | APPLICATION OF UNDERGROUND COATINGS |
| PIP CTSE1000 : 2012 | APPLICATION OF EXTERNAL COATINGS |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| ISO 8502-10:1999 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 10: Field method for the titrimetric determination of water-soluble chloride |
| ISO/TR 8502-1:1991 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 1: Field test for soluble iron corrosion products |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 8502-2:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 2: Laboratory determination of chloride on cleaned surfaces |
| ISO 8502-9:1998 | Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 9: Field method for the conductometric determination of water-soluble salts |
| ISO 8504-3:1993 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.