ISO 8068:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
24-04-2024
Superseded by
Language(s)
French, Russian, English
Published date
22-09-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 8068:2006 specifies the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines. This International Standard does not specify the requirements for wind turbines, which are dealt with in ISO 12925-1.
Whilst power generation is the primary application for turbines, steam and gas turbines can also be used to drive rotating equipment, such as pumps and compressors. The lubrication systems of these driven loads can be common to that of the turbine.
Turbine installations incorporate complex auxiliary systems requiring lubrication, including hydraulic systems, gearboxes and couplings. Depending upon the design and configuration of the turbine and driven equipment, turbine lubricants can also be used in these auxiliary systems.
ISO 8068:2006 should be read in conjunction with ISO 6743-5, the classification of different turbine lubricant types.
The lubricants considered in ISO 8068:2006 are mineral oils, synthetic lubricants (ester and polyalphaolefin types intended for high-temperature gas turbines), synthetic lubricants (ester and polyalphaolefin types, environmentally acceptable for use in hydraulic turbines) and fire-resistant phosphate-ester type lubricants.
| Committee |
ISO/TC 28/SC 4
|
| DevelopmentNote |
Supersedes ISO/DIS 8068 (09/2006)
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| NF ISO 8068 : 2006 | Identical |
| BS ISO 8068:2006 | Identical |
| NEN-ISO 8068:2006/A1:2019 | Identical |
| NEN-ISO 8068:2006 | Identical |
| PN ISO 8068 : 2009 | Identical |
| UNI ISO 8068 : 1989 | Identical |
| BS 489:1983 | Similar to |
| UNE 51602:1996 | Identical |
| NBN ISO 8068 : 1991 | Identical |
| BS EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors General requirements |
| BS EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
| I.S. EN ISO 10439-3:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 3: INTEGRALLY GEARED CENTRIFUGAL COMPRESSORS (ISO 10439-3:2015) |
| BS EN ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries. Axial and centrifugal compressors and expander-compressors Integrally geared centrifugal compressors |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| BS 489:1999 | Specification for turbine lubricants |
| 10/30231440 DC : 0 | BS EN ISO 10439-3 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 3: INTEGRALLY GEARED CENTRIFUGAL COMPRESSORS |
| XP ISO/TS 11366 : 2011 XP | PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| I.S. EN ISO 10439-1:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS - PART 1: GENERAL REQUIREMENTS (ISO 10439-1:2015) |
| API STD 612:2020 | Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
| BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
| I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
| ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 1: General requirements |
| 08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
| EN ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 3: Integrally geared centrifugal compressors (ISO 10439-3:2015) |
| EN ISO 10439-1:2015 | Petroleum, petrochemical and natural gas industries - Axial and centrifugal compressors and expander-compressors - Part 1: General requirements (ISO 10439-1:2015) |
| EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
| 14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
| 09/30171555 DC : DRAFT SEP 2009 | BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 617 : 2014 | AXIAL AND CENTRIFUGAL COMPRESSORS AND EXPANDER-COMPRESSORS |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ASTM D 4304 : 2017 : REDLINE | Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines |
| DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| ISO 10439-3:2015 | Petroleum, petrochemical and natural gas industries Axial and centrifugal compressors and expander-compressors Part 3: Integrally geared centrifugal compressors |
| ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines) |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 20764:2003 | Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method |
| ISO 14593:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| ISO 6743-6:1990 | Lubricants, industrial oils and related products (class L) Classification Part 6: Family C (Gears) |
| ISO 7624:1997 | Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability |
| ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 7537:1997 | Petroleum products — Determination of acid number — Semi-micro colour-indicator titration method |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ISO 12925-1:1996 | Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
| ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
| ISO 7346-2:1996 | Water quality Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] Part 2: Semi-static method |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.