ISO 8041:2005
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Human response to vibration Measuring instrumentation
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
09-12-2021
Superseded by
Published date
06-04-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 8041:2005 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, periodic verification and in-situ checks, and the specification of vibration calibrators for in-situ checks.
Vibration instruments specified in ISO 8041:2005 can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems.
Three levels of performance testing are defined in ISO 8041:2005: pattern evaluation, i.e. a full test of the instrument against the specifications defined in this International Standard; periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification, and in-situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.
| DevelopmentNote |
DRAFT ISO/DIS 8041 is also available for this standard. (01/2016)
|
| DocumentType |
Standard
|
| Pages |
99
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN ISO 8041:2005 | Identical |
| DIN EN ISO 8041:2006-06 | Identical |
| GOST ISO 8041 : 2006 ERRATA 2009 | Identical |
| NBN EN ISO 8041 : 2005 COR 2008 | Identical |
| NBN ENV 28041 : 96 AMD 1 2001 | Identical |
| NEN EN ISO 8041 : 2005 C1 2007 | Identical |
| NS EN ISO 8041 : 2005 AC 2008 | Identical |
| I.S. EN ISO 8041:2005 | Identical |
| PN EN ISO 8041 : 2008 AC 2008 | Identical |
| SN EN ISO 8041 : 2005 CORR 2008 | Identical |
| UNI EN ISO 8041 : 2005 | Identical |
| BIS IS/ISO 8041 : 2006 | Identical |
| UNE-EN ISO 8041:2006 | Identical |
| BS EN ISO 8041:2005 | Identical |
| NF EN ISO 8041 : 2005 | Identical |
| NEN NVN ENV ISO 8041 : 1997 AMD 1 2001 | Identical |
| DD ENV 28041:1993 | Identical |
| NEN NVN ENV 28041 : 1997 | Identical |
| NFE 90 403 : 93 AMD 1 2002 | Identical |
| DIN 45671-1:1990-09 | Corresponds |
| DIN V ENV 28041 : 93 AMD 1 2001 | Corresponds |
| NEN NVN ISO 8041 : 1993 | Identical |
| I.S. EN 28041:1993 | Identical |
| CSA M5008 : 2003 | AGRICULTURAL WHEELED TRACTORS AND FIELD MACHINERY - MEASUREMENT OF WHOLE-BODY VIBRATION OF THE OPERATOR |
| CSA ISO 5349-2 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE |
| BS 6841:1987 | Guide to measurement and evaluation of human exposure to whole-body mechanical vibration and repeated shock |
| 09/30206741 DC : 0 | BS EN 15997 - ALL TERRAIN VEHICLES - REQUIREMENTS AND TEST METHODS |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| 06/30146489 DC : DRAFT FEB 2006 | ISO 10137 - BASIS FOR DESIGN OF STRUCTURES - SERVICEABILITY OF BUILDINGS AND WALKWAYS AGAINST VIBRATIONS |
| I.S. EN 16230-1:2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| BS ISO 20283-5:2016 | Mechanical vibration. Measurement of vibration on ships Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships |
| 08/30182206 DC : DRAFT SEP 2008 | BS EN 12348 AMD1 - CORE DRILLING MACHINES ON STAND - SAFETY |
| BS ISO 5007:2003 | Agricultural wheeled tractors. Operators seat. Laboratory measurement of transmitted vibration |
| 02/107764 DC : DRAFT DEC 2002 | ISO 18652 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - EXTERNAL VIBRATORS FOR CONCRETE |
| 08/30182212 DC : DRAFT SEP 2008 | BS EN 13862 AMD1 - FLOOR CUTTING-OFF MACHINES - SAFETY |
| ANSI S3.18 PT1 : 2002 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| I.S. EN ISO 5395-1:2013 | GARDEN EQUIPMENT - SAFETY REQUIREMENTS FOR COMBUSTION-ENGINE-POWERED LAWNMOWERS - PART 1: TERMINOLOGY AND COMMON TESTS (ISO 5395-1:2013) |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 8727 : 1997 | MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE BIODYNAMIC COORDINATE SYSTEMS |
| I.S. EN 62282-3-2:2006 | FUEL CELL TECHNOLOGIES - PART 3-2: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS EN 16230-1 : 2013 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| I.S. EN ISO 10517:2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009) |
| ISO 5395-1:2013 | Garden equipment — Safety requirements for combustion-engine-powered lawnmowers — Part 1: Terminology and common tests |
| I.S. EN 62841-1:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ANSI S2.70 : 2006(R2016) | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ISO 21984:2018 | Ships and marine technology — Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on specific ships |
| ANSI S2.72 PT1 : 2002 : INC : AMD 1 : 2010 : R200700 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 15997:2013 | All terrain vehicles (ATVs - Quads) - Safety requirements and test methods |
| SAE J2834 : 2019 | RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY |
| UNI EN ISO 28802 : 2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE |
| I.S. ENV 12299:1999 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| ISO 5007:2003 | Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration |
| AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| AAMI ES60601-1 : 2005 : R2012 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN ISO 7096:2010-02 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION |
| UNE-ISO 2631-2:2011 | Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| BS EN ISO 19432:2012 | Building construction machinery and equipment. Portable, hand-held, internal combustion engine driven cut-off machines. Safety requirements |
| BS EN 12348 : 2000 | CORE DRILLING MACHINES ON A STAND - SAFETY |
| BS EN 1032 : 2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| BS EN 12096:1997 | Mechanical vibration. Declaration and verification of vibration emission values |
| BS EN 12418 : 2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| EN 12418:2000+A1:2009 | Masonry and stone cutting-off machines for job site - Safety |
| EN 12096:1997 | Mechanical vibration - Declaration and verification of vibration emission values |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN 1032:2003+A1:2008 | Mechanical vibration - Testing of mobile machinery in order to determine the vibration emission value |
| EN 13490:2001+A1:2008 | Mechanical vibration - Industrial trucks - Laboratory evaluation and specification of operator seat vibration |
| DIN EN ISO 10326-1:2017-03 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016) |
| ONORM EN ISO 10819 : 2013 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013) |
| CEI EN 62841-1 : 2016 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 6954:2000 | Mechanical vibration Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| 10/30195968 DC : 0 | BS ISO 18738-2 - MEASUREMENT OF RIDE QUALITY - PART 2: ESCALATORS AND MOVING WALKS |
| 10/30214880 DC : 0 | BS ISO 18738-1 - MEASUREMENT OF LIFT RIDE QUALITY - PART 1: LIFTS (ELEVATORS) |
| I.S. EN 30326-1:1994 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:1992/AMD 2:2011) |
| 06/30153018 DC : 0 | EN 12299 - RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| DIN EN ISO 28802:2012-06 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| CSA M7096 : 2000 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION |
| 03/119009 DC : DRAFT DEC 2003 | ISO 18651 - BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - INTERNAL VIBRATORS FOR CONCRETE |
| BS ISO 18738-1:2012 | Measurement of ride quality Lifts (elevators) |
| ISO 18738-2:2012 | Measurement of ride quality Part 2: Escalators and moving walks |
| 17/30354940 DC : 0 | BS ISO 21984 - SHIPS AND MARINE TECHNOLOGY - GUIDELINES FOR MEASUREMENT, EVALUATION AND REPORTING OF VIBRATION WITH REGARD TO HABITABILITY ON SPECIFIC SHIPS |
| 13/30272883 DC : 0 | BS EN ISO 5349-2:2001/AMD 1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE - AMENDMENT 1 |
| 10/30210053 DC : 0 | BS ISO 20643:2005/CD AMD 1 - MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION |
| DIN EN 15997:2012-10 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| NF ISO 5007 : 2003 | AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| ISO 18738-1:2012 | Measurement of ride quality Part 1: Lifts (elevators) |
| I.S. EN 50144-2-13:2002 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 2-13: PARTICULAR REQUIREMENTS FOR CHAIN SAWS |
| CSA ISO 10819 : 2016 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
| I.S. ENV 25349:1993 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION (ISO 5349:1986) |
| SAE J 2834 : 2013(R2019) | RIDE INDEX STRUCTURE AND DEVELOPMENT METHODOLOGY |
| PREN ISO 10819 : DRAFT 2011 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO/DIS 10819:2011) |
| NF EN ISO 10517 : 2009 AMD 1 2013 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| BS EN ISO 10326-1:2016 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Basic requirements |
| UNE-EN ISO 10326-1:2017 | Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 1: Basic requirements (ISO 10326-1:2016, Corrected version 2017-02) |
| ISO 18738:2003 | Lifts (elevators) - Measurement of lift ride quality |
| AAMI ES60601-1 : 2005 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD) |
| DIN EN 12418:2010-03 | Masonry and stone cutting-off machines for job site - Safety (includes Amendment A1:2009) |
| DIN EN 13490:2009-03 | MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION |
| BS ISO 14837-1:2005 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems General guidance |
| BS EN 13490 : 2002 | |
| I.S. EN 12418:2000 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| I.S. EN 13862:2002 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| I.S. EN ISO 19432:2012 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| I.S. EN ISO 20643:2008 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005) |
| I.S. EN 13861:2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| I.S. EN ISO 22867:2011 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011) |
| I.S. EN 14253:2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| DIN EN ISO 10517:2014-03 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY (ISO 10517:2009 + AMD 1:2013) |
| I.S. EN 12348:2000 | CORE DRILLING MACHINES ON STAND - SAFETY |
| I.S. EN 13490:2002 | |
| DIN EN ISO 10819:2013-12 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013) |
| I.S. EN 1032:2003 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| VDI 2057 Blatt 2:2016-03 | Human exposure to mechanical vibrations - Hand-arm vibration |
| VDI 2057 Blatt 3:2017-03 | Human exposure to mechanical vibration - Whole-body vibration at workplaces in buildings |
| NF EN ISO 22867 : 2012 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION - VIBRATION AT THE HANDLES |
| VDI 2057-1 : 2017 COR 1 2017 | HUMAN EXPOSURE TO MECHANICAL VIBRATIONS - WHOLE-BODY VIBRATION |
| VDI 4087:2016-12 | Planning, construction and managing of scrap wood yards |
| BIS IS/ISO 2631-2 : 2003(R2007) | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE BODY VIBRATION - PART 2: VIBRATION IN BUILDINGS (1 HZ TO 80 HZ) |
| DIN ISO 10816-21:2015-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015) |
| I.S. EN ISO 5349-1:2002 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| 14/30299946 DC : 0 | BS ISO 8727:1997/AMD 1 - MECHANICAL VIBRATION AND SHOCK - HUMAN EXPOSURE - BIODYNAMIC COORDINATE SYSTEMS |
| BS IEC 60747-14-4:2011 | Semiconductor devices. Discrete devices Semiconductor accelerometers |
| 16/30319144 DC : 0 | BS ISO 20283-5 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 5: GUIDELINES FOR MEASUREMENT, EVALUATION AND REPORTING OF VIBRATION WITH REGARD TO HABITABILITY ON PASSENGER AND MERCHANT SHIPS |
| BS EN 12299:2009 | Railway applications. Ride comfort for passengers. Measurement and evaluation |
| 10/30173701 DC : 0 | BS EN 62282-3-200 - FUEL CELL TECHNOLOGIES - PART 3-200: STATIONARY FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS |
| BS ISO 10816-21:2015 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox |
| 00/702359 DC : DRAFT JAN 2000 | ISO/DIS 2631-2 - MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 2: VIBRATIONS IN BUILDINGS (1 HZ TO 80 HZ) |
| 14/30265061 DC : 0 | BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX |
| BS ISO 6954:2000 | Mechanical vibration. Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships |
| 15/30325986 DC : 0 | BS EN ISO 10326-1 - MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS |
| 08/30182209 DC : DRAFT SEP 2008 | BS EN 12418 AMD1 - MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| 16/30341489 DC : 0 | BS ISO 16063-44 - METHODS FOR THE CALIBRATION OF VIBRATION AND SHOCK TRANSDUCERS - PART 44: CALIBRATION OF FIELD VIBRATION CALIBRATORS |
| UNI ISO 2631-1 : 2014 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| SAE J ISO 7096 : FEB 2003 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SET VIBRATION |
| BS EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs General requirements |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| UNI EN ISO 10517 : 2014 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| I.S. EN 60601-1:2006&A1:2013&AC:2014&A12:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| DIN EN ISO 10326-1:2015-09 (Draft) | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016) |
| I.S. EN ISO 10819:2013 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:2013) |
| ANSI S2.72 PT1 : 2002 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| ISO 10819:2013 | Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| ISO 10326-2:2001 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles |
| ISO 5008:2002 | Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator |
| IEC 60747-14-4:2011 | Semiconductor devices - Discrete devices - Part 14-4: Semiconductor accelerometers |
| I.S. EN 12299:2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| DIN EN 13862:2010-03 | Floor cutting-off machines - Safety (includes Amendment A1:2009) |
| DIN EN 12348:2010-01 | Core drilling machines on stand - Safety (includes Amendment A1:2009) |
| DIN EN ISO 5349-1:2001-12 | MECHANICAL VIBRATIONS - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 5349-2:2015-12 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349-2:2001 + AMD 1:2015) |
| DIN EN 1032:2009-02 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| DIN EN 13861:2012-01 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| UNE-EN 62841-1:2016 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 1: General requirements |
| ISO 28802:2012 | Ergonomics of the physical environment — Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| BS EN 30326-1 : 1994 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS |
| BS EN ISO 7096:2008 | Earth-moving machinery. Laboratory evaluation of operator seat vibration |
| ISO 14837-1:2005 | Mechanical vibration Ground-borne noise and vibration arising from rail systems Part 1: General guidance |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| BS EN 62841-1:2015 | Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety General requirements |
| BS EN ISO 5349-1:2001 | Mechanical vibration. Measurement and evaluation of human exposure to hand-transmitted vibration General requirements |
| ISO 22867:2011 | Forestry and gardening machinery Vibration test code for portable hand-held machines with internal combustion engine Vibration at the handles |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60601-1:2008 | Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance |
| EN 60745-1:2006 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN ISO 19432:2012 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| UNI EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN ISO 10819 : 2013 | MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
| ONORM EN 13862 : 2009 | FLOOR CUTTING-OFF MACHINES - SAFETY |
| UNI EN ISO 5349-1 : 2004 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| UNI EN 13861 : 2011 | SAFETY OF MACHINERY - GUIDANCE FOR THE APPLICATION OF ERGONOMICS STANDARDS IN THE DESIGN OF MACHINERY |
| UNI EN 30326-1 : 2012 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS |
| UNI EN ISO 19432 : 2013 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS |
| UNI EN ISO 20643 : 2012 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION |
| UNI EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| UNI EN 13490 : 2009 | MECHANICAL VIBRATION - INDUSTRIAL TRUCKS - LABORATORY EVALUATION AND SPECIFICATION OF OPERATOR SEAT VIBRATION |
| EN 14253:2003+A1:2007 | Mechanical vibration - Measurement and calculation of occupational exposure to whole-body vibration with reference to health - Practical guidance |
| ONORM EN ISO 22867 : 2012 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES (ISO 22867:2011) |
| UNI EN 14253 : 2008 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| UNI EN 12348 : 2009 | CORE DRILLING MACHINES ON STAND - SAFETY |
| UNI EN 1032 : 2009 | MECHANICAL VIBRATION - TESTING OF MOBILE MACHINERY IN ORDER TO DETERMINE THE VIBRATION EMISSION VALUE |
| UNI ISO 14837-1 : 2013 | MECHANICAL VIBRATION - GROUND-BORNE NOISE AND VIBRATION ARISING FROM RAIL SYSTEMS - PART 1: GENERAL GUIDANCE |
| ONORM EN 12418 : 2009 | MASONRY AND STONE CUTTING-OFF MACHINES FOR JOB SITE - SAFETY |
| ISO 2631-5:2004 | Mechanical vibration and shock Evaluation of human exposure to whole-body vibration Part 5: Method for evaluation of vibration containing multiple shocks |
| CSA ISO 5349-1 : 2016 | MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS |
| 09/30197819 DC : 0 | BS ISO 2631-1/AMD1 - MECHANICAL VIBRATION - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| 11/30212883 DC : 0 | BS EN ISO 10819 - MECHANICAL VIBRATION AND SHOCK - HAND-ARM VIBRATION - METHOD FOR THE MEASUREMENT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND |
| DIN EN 12299:2009-08 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| BS 6912-17:1995 | Safety of earth-moving machinery Specification for laboratory evaluation of operator seat vibration |
| ABS 0162 : 2014 | GUIDE FOR COMFORT ON YACHTS |
| 02/706469 DC : DRAFT MAY 2002 | PREN ISO 20643 - HAND-TRANSMITTED VIBRATION FROM HAND-HELD OR HAND-GUIDED MACHINERY - MEASUREMENT OF VIBRATION AT THE GRIP SURFACE |
| 09/30205267 DC : 0 | BS ISO 22867 - FORESTRY AND GARDEN MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES |
| BS EN ISO 28802:2012 | Ergonomics of the physical environment. Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people |
| 07/30171078 DC : DRAFT AUG 2007 | BS EN 61029-1 - SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| BS EN 62282-3-2:2006 | Fuel cell technologies Stationary fuel cell power systems. Performance test methods |
| ISO 10517:2009 | Powered hand-held hedge trimmers Safety |
| UNI EN 12299 : 2009 | RAILWAY APPLICATIONS - RIDE COMFORT FOR PASSENGERS - MEASUREMENT AND EVALUATION |
| ANSI/ASA S2.25 : 2004(R2014) | American National Standard Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships |
| ISO 18652:2005 | Building construction machinery and equipment External vibrators for concrete |
| ISO/TS 14837-32:2015 | Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground |
| ANSI S2.72/Part 1-2002(R2007) | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| ANSI S2.25 : 2004 | GUIDE FOR THE MEASUREMENT, REPORTING, AND EVALUATION OF HULL AND SUPERSTRUCTURE VIBRATION IN SHIPS |
| ANSI S2.70 : 2006 : R2011 | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ANSI S2.25 : 2004 : R2009 | GUIDE FOR THE MEASUREMENT, REPORTING, AND EVALUATION OF HULL AND SUPERSTRUCTURE VIBRATION IN SHIPS |
| BS EN ISO 10819:2013 | Mechanical vibration and shock. Hand-arm vibration. Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand |
| ISO 10816-21:2015 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox |
| I.S. EN 60745-1:2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 22867:2012-04 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| ISO 10137:2007 | Bases for design of structures - Serviceability of buildings and walkways against vibrations |
| 12/30272980 DC : 0 | BS EN 6XXXX-1 - ELECTRIC MOTOR-OPERATED HAND-HELD, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 60601-1 : 2006 | MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| ISO 19432:2012 | Building construction machinery and equipment Portable, hand-held, internal combustion engine driven cut-off machines Safety requirements |
| BS EN 28662-1:1993 | Hand-held portable power tools. Measurement of vibrations at the handle General |
| IEC 60601-1:2005+AMD1:2012 CSV | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance |
| BS EN 14253 : 2003 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| UNI EN ISO 7096 : 2009 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| DIN EN ISO 20643:2012-10 | Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission (ISO 20643:2005 + Amd. 1:2012) (includes Amendment :2012) |
| UNE-EN ISO 22867:2012 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| CAN/CSA-C22.2 No. 62841-1 : 2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| UNE-EN ISO 19432:2013 | Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements (ISO 19432:2012) |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| I.S. EN ISO 7096:2008 | EARTH-MOVING MACHINERY - LABORATORY EVALUATION OF OPERATOR SEAT VIBRATION |
| DIN EN ISO 19432:2012-12 | BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - PORTABLE, HAND-HELD, INTERNAL COMBUSTION ENGINE DRIVEN CUT-OFF MACHINES - SAFETY REQUIREMENTS (ISO 19432:2012) |
| BS EN ISO 5349-2 : 2002 | MECHANICAL VIBRATION - MEASUREMENT AND ASSESSMENT OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE |
| BS EN ISO 20643 : 2008 | MECHANICAL VIBRATION - HAND-HELD AND HAND-GUIDED MACHINERY - PRINCIPLES FOR EVALUATION OF VIBRATION EMISSION (ISO 20643:2005) |
| UNE-EN ISO 10517:2010 | Powered hand-held hedge trimmers - Safety (ISO 10517:2009) |
| 04/30106146 DC : DRAFT MARCH 2004 | BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE |
| UNE-EN ISO 5349-2:2002 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace. (ISO 5349-2:2001) |
| EN 28662-1:1992 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General (ISO 8662-1:1988) |
| EN 13861:2011 | Safety of machinery - Guidance for the application of ergonomics standards in the design of machinery |
| EN ISO 28802:2012 | Ergonomics of the physical environment - Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people (ISO 28802:2012) |
| UNI EN ISO 22867 : 2012 | FORESTRY AND GARDENING MACHINERY - VIBRATION TEST CODE FOR PORTABLE HAND-HELD MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION AT THE HANDLES |
| ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
| EN 16230-1:2013+A1:2014 | Leisure karts - Part 1: Safety requirements and test methods for karts |
| BS ISO 18738:2003 | Lifts (elevators). Measurement of lift ride quality |
| BS EN 15997:2011 | All terrain vehicles (ATVs - Quads). Safety requirements and test methods |
| I.S. EN 15997:2011 | ALL TERRAIN VEHICLES (ATVS - QUADS) - SAFETY REQUIREMENTS AND TEST METHODS |
| BS ISO 18738-2:2012 | Measurement of ride quality Escalators and moving walks |
| BS ISO 10326-2:2001 | Mechanical vibration. Laboratory method for evaluating vehicle seat vibration Part 2: Application to railway vehicles |
| DIN EN 16230-1:2015-04 | LEISURE KARTS - PART 1: SAFETY REQUIREMENTS AND TEST METHODS FOR KARTS |
| CSA M5007 : 2003 | AGRICULTURAL WHEELED TRACTORS - OPERATOR'S SEAT - LABORATORY MEASUREMENT OF TRANSMITTED VIBRATION |
| BS EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools Particular requirements for chain saws |
| BS ISO 2631-1:1997 | Mechanical vibration and shock. Evaluation of human exposure to whole-body vibration General Requirements |
| BS ISO 5008:2002 | Agricultural wheeled tractors and field machinery. Measurement of whole-body vibration of the operator |
| PD ISO/TS 14837-32:2015 | Mechanical vibration. Ground-borne noise and vibration arising from rail systems Measurement of dynamic properties of the ground |
| ISO 20283-5:2016 | Mechanical vibration Measurement of vibration on ships Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships |
| BS ISO 22867:2004 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| 03/112608 DC : DRAFT AUG 2003 | ISO 22867 - PORTABLE HAND-HELD FORESTRY MACHINES WITH INTERNAL COMBUSTION ENGINE - VIBRATION TEST CODE - MEASUREMENT OF VIBRATION AT THE HANDLES |
| ABS 0166 : 2014 | GUIDE FOR COMPLIANCE WITH THE ILO MARITIME LABOUR CONVENTION, 2006 - TITLE 3: REQUIREMENTS |
| BS EN 60745-1 : 2009 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 10517 : 2009 | POWERED HAND-HELD HEDGE TRIMMERS - SAFETY |
| ISO 8727:1997 | Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems |
| I.S. EN ISO 10326-1:2016 | MECHANICAL VIBRATION - LABORATORY METHOD FOR EVALUATING VEHICLE SEAT VIBRATION - PART 1: BASIC REQUIREMENTS (ISO 10326-1:2016) |
| ANSI S2.72 PT1 : 2002 : R2012 | MECHANICAL VIBRATION AND SHOCK - EVALUATION OF HUMAN EXPOSURE TO WHOLE-BODY VIBRATION - PART 1: GENERAL REQUIREMENTS |
| ANSI S2.70:2006 | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| I.S. EN ISO 28802:2012 | ERGONOMICS OF THE PHYSICAL ENVIRONMENT - ASSESSMENT OF ENVIRONMENTS BY MEANS OF AN ENVIRONMENTAL SURVEY INVOLVING PHYSICAL MEASUREMENTS OF THE ENVIRONMENT AND SUBJECTIVE RESPONSES OF PEOPLE (ISO 28802:2012) |
| ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
| ISO 5349:1986 | Mechanical vibration — Guidelines for the measurement and the assessment of human exposure to hand-transmitted vibration |
| ISO 7096:2000 | Earth-moving machinery Laboratory evaluation of operator seat vibration |
| IEC 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| ISO 20643:2005 | Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
| BS EN 13861:2011 | Safety of machinery. Guidance for the application of ergonomics standards in the design of machinery |
| BS EN ISO 22867:2008 | Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles |
| EN 62282-3-2:2006 | Fuel cell technologies - Part 3-2: Stationary fuel cell power systems - Performance test methods |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 14253:2008-02 | MECHANICAL VIBRATION - MEASUREMENT AND CALCULATION OF OCCUPATIONAL EXPOSURE TO WHOLE-BODY VIBRATION WITH REFERENCE TO HEALTH - PRACTICAL GUIDANCE |
| EN 62841-1:2015/AC:2015 | ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN ISO 22867:2011 | Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2011) |
| EN 50260-1:2002 | Safety of hand-held battery-powered motor-operated tools and battery packs - Part 1: General requirements |
| EN 12348:2000+A1:2009 | Core drilling machines on stand - Safety |
| EN 12299:2009 | Railway applications - Ride comfort for passengers - Measurement and evaluation |
| EN 13862:2001+A1:2009 | Floor cutting-off machines - Safety |
| EN 50144-2-13:2002 | Safety of hand-held electric motor operated tools - Part 2-13: Particular requirements for chain saws |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 60601- 1:2006&A1:2013&A12:2014&A2:2021 | Medical electrical equipment - Part 1: General requirements for basic safety and essential performance (IEC 60601-1:2005/A2:2020) |
| UNE-EN ISO 10819:2014 | Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) |
| IEC 61000-6-2:2016 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
| ISO/IEC Guide 98:1993 | Guide to the expression of uncertainty in measurement (GUM) |
| ISO 10326-1:2016 | Mechanical vibration Laboratory method for evaluating vehicle seat vibration Part 1: Basic requirements |
| CISPR 16-1-1:2015 | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus |
| ISO 2631-4:2001 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| DIN 45662:1996-12 | VIBRATION MEASURING INSTRUMENTATION - FUNDAMENTAL REQUIREMENTS AND VERIFICATION |
| ISO 1683:2015 | Acoustics Preferred reference values for acoustical and vibratory levels |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| IEC 61260:1995 | Electroacoustics - Octave-band and fractional-octave-band filters |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.