ISO 7637-2:2011
Current
Current
The latest, up-to-date edition.
Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
01-03-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 7637-2:2011 specifies test methods and procedures to ensure the compatibility to conducted electrical transients of equipment installed on passenger cars and commercial vehicles fitted with 12 V or 24 V electrical systems. It describes bench tests for both the injection and measurement of transients. It is applicable to all types of road vehicles independent of the propulsion system (e.g. spark ignition or diesel engine, electric motor).
Function performance status classification for immunity to transients is also provided.
| DevelopmentNote |
Supersedes SAE J 1113/42. (12/2010) Supersedes ISO/DIS 7637-2. (03/2011)
|
| DocumentType |
Standard
|
| Pages |
43
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 7637-2 : 2011 | Identical |
| BS ISO 7637-2:2011 | Identical |
| NEN ISO 7637-2 : 2016 | Identical |
| DIN 40839-1:1992-10 | Corresponds |
| BS AU 243-3:1991 | Identical |
| UNE 26438-3:1994 | Identical |
| BS EN 60601-1-2:2015 | Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard. Electromagnetic disturbances. Requirements and tests |
| 10/30208924 DC : 0 | BS ISO 8854 - ROAD VEHICLES - ALTERNATORS WITH REGULATORS - TESTS METHODS AND GENERAL REQUIREMENTS |
| PD IEC/TR 60601-4-2:2016 | Medical electrical equipment Guidance and interpretation. Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
| BS ISO 8854:2012 | Road vehicles. Alternators with regulators. Test methods and general requirements |
| DIN ISO 7637-3:1999-02 | ROAD VEHICLES - ELECTRICAL DISTURBANCE BY CONDUCTION AND COUPLING - PART 3: VEHICLES WITH NOMINAL 12 V OR 24 V SUPPLY VOLTAGE; ELECTRICAL TRANSIENT TRANSMISSION BY CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES |
| BS ISO 14230-1:2012 | Road vehicles. Diagnostic communication over K-Line (DoK-Line) Physical layer |
| BS EN 16657 : 2016 | TANKS FOR THE TRANSPORT OF DANGEROUS GOODS - TRANSPORT TANK EQUIPMENT FOR OVERFILL PREVENTION DEVICES FOR STATIC TANKS |
| S.R. CEN ISO/TS 14907-1:2015 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| BS ISO 22902-7:2006 | Road vehicles. Automotive multimedia interface Physical specification |
| UNE-EN 50194-2:2007 | Electrical apparatus for the detection of combustible gases in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements |
| SAE J1113/1_201310 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| PD CEN/TR 16152:2011 | Electronic fee collection. Personalisation and mounting of first mount OBE |
| 11/30212434 DC : 0 | BS ISO 14230-1 - ROAD VEHICLES - DIAGNOSTIC COMMUNICATION OVER K-LINE (DOK-LINE) - PART 1: PHYSICAL LAYER |
| PD CEN ISO/TS 14907-1:2015 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| 06/30134245 DC : 0 | ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT APPLICATION PROGRAMMER INTERFACE (D-PDU API) |
| BS EN 62228-2:2017 | Integrated circuits. EMC evaluation of transceivers LIN transceivers |
| DD CEN ISO/TS 14907-1:2010 | Electronic fee collection. Test procedures for user and fixed equipment Description of test procedures |
| CEI EN 60601-1-2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| OIML R 81 : 1998 | DYNAMIC MEASURING DEVICES AND SYSTEMS FOR CRYOGENIC LIQUIDS |
| CEI EN 50498 : 2013 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PRODUCT FAMILY STANDARD FOR AFTERMARKET ELECTRONIC EQUIPMENT IN VEHICLES |
| SAE J ISO 13766 : FEB 2003 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| PREN 624 : DRAFT 2009 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| OIML R 134-1 : 2006 | AUTOMATIC INSTRUMENTS FOR WEIGHING ROAD VEHICLES IN MOTION AND MEASURING AXLE LOADS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| SAE J2954_201711 | Wireless Power Transfer for Light-Duty Plug-In/Electric Vehicles and Alignment Methodology |
| ISO 7634:2007 | Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures |
| ISO 10483-1:2004 | Road vehicles Intelligent power switches Part 1: High-side intelligent power switch |
| OIML D 11 : 2013 | GENERAL REQUIREMENTS FOR MEASURING INSTRUMENTS - ENVIRONMENTAL CONDITIONS |
| EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| TS 134 124 : 13.0.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 34.124 VERSION 14.0.0 RELEASE 14) |
| ISO 22900-2:2017 | Road vehicles Modular vehicle communication interface (MVCI) Part 2: Diagnostic protocol data unit (D-PDU API) |
| I.S. EN 60601-1-2:2015 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| ISO 27145-6:2015 | Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment |
| 01/714099 DC : DRAFT OCT 2001 | ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| BS EN 45501:2015 | Metrological aspects of non-automatic weighing instruments |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| UNE-EN 12645:2015 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| BS EN 624:2011 | Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats |
| BS EN 12645:2014 | Tyre pressure measuring instruments. Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles. Metrology, requirements and testing |
| 08/30173378 DC : DRAFT AUG 2008 | BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| DIN EN 230:2005-10 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| EN 50502:2015 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| EN 60601-1-2:2015 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| EN 12645:2014 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| CEN/TR 16152:2011 | Electronic fee collection - Personalisation and mounting of first mount OBE |
| DEFSTAN 23-6/4(2005) : 2005 | TECHNOLOGY GUIDANCE FOR MILITARY LOGISTICS VEHICLES |
| DEFSTAN 23-6/3(2000) : 2000 | GUIDE TO THE COMMON TECHNICAL REQUIREMENTS FOR MILITARY LOGISTIC VEHICLES AND TOWED EQUIPMENT |
| NF EN 301489-1 : 2012 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM) - ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES - PART 1: COMMON TECHNICAL REQUIREMENTS |
| BS EN 50498:2010 | Electromagnetic compatibility (EMC). Product family standard for aftermarket electronic equipment in vehicles |
| 10/30209944 DC : 0 | BS EN 62215-3 - INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| ANSI/AAMI/IEC 60601-1-2:2014 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| BS ISO 7637-3:2016 | Road vehicles. Electrical disturbances from conduction and coupling Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| EN 61851-21-1:2017/AC:2017-11 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017) |
| CSA M14982 : 2000 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| TS 102 192-1 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); INTERNATIONAL TECHNICAL CHARACTERISTICS AND TEST METHODS; PART 1: WIRELESS/RADIO MICROPHONES IN THE 25 MHZ TO 3 GHZ FREQUENCY RANGE |
| BS ISO 15031-4:2014 | Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics External test equipment |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| 06/30134242 DC : 0 | ISO 22900-1 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 1: HARDWARE DESIGN REQUIREMENTS |
| CEI EN 62228-2 : 1ED 2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| I.S. EN 50194-2:2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| BS ISO 15003:2006 | Agricultural engineering. Electrical and electronic equipment. Testing resistance to environmental conditions |
| I.S. EN 50436-1:2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| IEC 60605-3-5:1996 | Equipment reliability testing - Part 3: Preferred test conditions - Section 5: Test cycle 5: Ground mobile equipment - Low degree of simulation |
| BS EN 50436-1:2014 | Alcohol interlocks. Test methods and performance requirements Instruments for drink-driving-offender programs |
| NF EN 50498 : 2011 | |
| I.S. EN 62228-2:2017 | INTEGRATED CIRCUITS - EMC EVALUATION OF TRANSCEIVERS - PART 2: LIN TRANSCEIVERS |
| OIML R 80-2 : 2017 | ROAD AND RAIL TANKERS WITH LEVEL GAUGING - PART 2: METROLOGICAL CONTROLS AND TESTS |
| CEI 79-51 : 2006 | COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS |
| BS EN 50194-2 : 2006 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| NF ETS 300684 : 1998 | |
| NF ISO 14230-1 : 2002 | ROAD VEHICLES - DIAGNOSTIC SYSTEMS - KEYWORD PROTOCOL 2000 - PART 1: PHYSICAL LAYER |
| I.S. ETSI EN 301489-1 V1.8.1:2009 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC) STANDARD FOR RADIO EQUIPMENT AND SERVICES; PART 1: COMMON TECHNICAL REQUIREMENTS |
| DIN EN 12645:2015-02 | Tyre pressure measuring instruments - Devices for inspection of pressure and/or inflation / deflation of tyres for motor vehicles - Metrology, requirements and testing |
| UNE-EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| I.S. EN 624:2011 | SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| I.S. EN 13309:2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| I.S. EN 12645:2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| I.S. EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| I.S. EN ISO 14982:2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| EN 45501:2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| CEI EN 62215-3 : 2014 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD |
| ISO/TR 12155:1994 | Commercial vehicles Obstacle detection device during reversing Requirements and tests |
| BS EN 61851-21-1:2017 | Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
| UNE-EN 16657:2016 | Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks |
| BS ISO 22900-2:2017 | Road vehicles. Modular vehicle communication interface (MVCI) Diagnostic protocol data unit (D-PDU API) |
| DIN CEN ISO/TS 14907-1;DIN SPEC 91192:2015-12 | ELECTRONIC FEE COLLECTION - TEST PROCEDURES FOR USER AND FIXED EQUIPMENT - PART 1: DESCRIPTION OF TEST PROCEDURES (ISO/TS 14907-1:2015) |
| BS ISO 7634:2007 | Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| BS ISO 22900-1:2008 | Road vehicles. Modular vehicle communication interface (MVCI) Hardware design requirements |
| 11/30219766 DC : 0 | BS ISO 15031-4 - ROAD VEHICLES - COMMUNICATION BETWEEN VEHICLE AND EXTERNAL EQUIPMENT FOR EMISSIONS-RELATED DIAGNOSTICS - PART 4: EXTERNAL TEST EQUIPMENT |
| ISO 15003:2006 | Agricultural engineering Electrical and electronic equipment Testing resistance to environmental conditions |
| 18/30320017 DC : 0 | BS ISO 11992-1 - ROAD VEHICLES - INTERCHANGE OF DIGITAL INFORMATION ON ELECTRICAL CONNECTIONS BETWEEN TOWING AND TOWED VEHICLES - PART 1: PHYSICAL AND DATA-LINK LAYERS |
| 14/30310470 DC : 0 | BS EN 62228-2 - INTEGRATED CIRCUITS - EMC EVALUATION OF LIN TRANSCEIVERS |
| 06/30157139 DC : 0 | |
| 11/30254162 DC : 0 | BS EN 45501 - METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| BS 6912-20:1996 | Safety of earth-moving machinery Specification for operator\'s controls |
| 13/30252783 DC : 0 | BS EN 50502 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| 16/30320037 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT AT THE HARDWARE LEVEL |
| 00/706017 DC : DRAFT MAR 2000 | BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES |
| NF ISO 13766 : 1999 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| SAE J2628_201307 | Characterization, Conducted Immunity |
| ISO 13766-1:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions |
| ISO 22902-7:2006 | Road vehicles Automotive multimedia interface Part 7: Physical specification |
| CEI 79-17 : 2002 | PROTECTION SYSTEMS FOR UNAUTHORIZED USE OF MOTOR VEHICLES - PARTICULAR REQUIREMENTS FOR THE PROTECTION SYSTEMS AGAINST THE THEFT FOR COMMERCIAL VEHICLES |
| SAE J2602/1_201211 | LIN Network for Vehicle Applications |
| IEC TS 62228:2007 | Integrated circuits - EMC evaluation of CAN transceivers |
| I.S. EN 62215-3:2013 | INTEGRATED CIRCUITS - MEASUREMENT OF IMPULSE IMMUNITY - PART 3: NON-SYNCHRONOUS TRANSIENT INJECTION METHOD (IEC 62215-3:2013 (EQV)) |
| I.S. EN 50502:2015 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CURRENT COLLECTION SYSTEMS |
| ISO 11835:2002 | Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance |
| I.S. EN 61851-21-1:2017 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY |
| OIML R 126 : 2012 | EVIDENTIAL BREATH ANALYZERS |
| CAN/CSA-Z627-16 | Breath alcohol ignition interlock devices |
| ISO 8854:2012 | Road vehicles — Alternators with regulators — Test methods and general requirements |
| ISO 26262-5:2011 | Road vehicles Functional safety Part 5: Product development at the hardware level |
| ISO 15031-4:2014 | Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| I.S. EN 13611:2015 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| UNE-EN 45501:2016 | Metrological aspects of non-automatic weighing instruments |
| 04/30089279 DC : DRAFT FEB 2004 | ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
| UNE-EN 50291-2:2011 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements |
| UNI EN 12645 : 2014 | TYRE PRESSURE MEASURING INSTRUMENTS - DEVICES FOR INSPECTION OF PRESSURE AND/OR INFLATION/DEFLATION OF TYRES FOR MOTOR VEHICLES - METROLOGY, REQUIREMENTS AND TESTING |
| UNI EN 13309 : 2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| UNI EN 1106 : 2010 | MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES |
| UNI EN 1854 : 2010 | PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES |
| UNI EN ISO 14982 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| I.S. EN IEC 60810:2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| ISO 21848:2005 | Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
| ISO 15763:2002 | Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| 11/30227758 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
| TR 134 926 : 13.0.0 | UNIVERSAL MOBILE TELECOMMUNICATIONS SYSTEM (UMTS); LTE; ELECTROMAGNETIC COMPATIBILITY (EMC); TABLE OF INTERNATIONAL REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TR 34.926 VERSION 14.0.0 RELEASE 14) |
| 12/30260709 DC : 0 | BS EN 50436-1 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| 16/30316578 DC : 0 | BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS |
| 09/30179100 DC : 0 | BS ISO 26262-5 - ROAD VEHICLES - FUNCTIONAL SAFETY - PART 5: PRODUCT DEVELOPMENT: HARDWARE LEVEL |
| OIML R 99-1 & 2 : 2008 | INSTRUMENTS FOR MEASURING VEHICLE EXHAUST EMISSIONS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS; PART 2: METROLOGICAL CONTROLS AND PERFORMANCE TESTS |
| SAE J1113/11_201706 | Immunity to Conducted Transients on Power Leads |
| CEI 56-21 : 2000 | EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 5: TEST CYCLE 5: GROUND MOBILE EQUIPMENT - LOW DEGREE OF SIMULATION |
| SAE J2357_201211 | Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment |
| OIML R 117-1 : 2007 | DYNAMIC MEASURING SYSTEMS FOR LIQUIDS OTHER THAN WATER - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS |
| OIML R 21 : 2007 | TAXIMETERS - METROLOGICAL AND TECHNICAL REQUIREMENTS, TEST PROCEDURES AND TEST REPORT FORMAT |
| IEC TR 60601-4-2:2016 | Medical electrical equipment - Part 4-2: Guidance and interpretation - Electromagnetic immunity: performance of medical electrical equipment and medical electrical systems |
| 07/30134250 DC : 0 | BS ISO 22900-3 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 3: DIAGNOSTIC SERVER APPLICATION PROGRAMMING INTERFACE (D-SERVER API) |
| 01/707379 DC : DRAFT APR 2001 | ISO/DIS 11452-7 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION |
| 14/30261285 DC : 0 | BS ISO 7637-3 - ROAD VEHICLES - ELECTRICAL DISTURBANCES FROM CONDUCTION AND COUPLING - PART 3: ELECTRICAL TRANSIENT TRANSMISSION BY CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES |
| SAE J2685_201412 | Positive Temperature Coefficient Overcurrent Protection Devices (PTCs) |
| 03/303499 DC : DRAFT FEB 2003 | BS ISO 10483-1 - ROAD VEHICLES - INTELLIGENT POWER SWITCHES - PART 1: HIGH-SIDE INTELLIGENT POWER SWITCH |
| NF ETS 300717 : 2000 | |
| 14/30291315 DC : 0 | BS ISO 22900-2 - ROAD VEHICLES - MODULAR VEHICLE COMMUNICATION INTERFACE (MVCI) - PART 2: DIAGNOSTIC PROTOCOL DATA UNIT (D-PDU API) |
| UNE-EN 50502:2016 | Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems |
| BIS IS 12508 : 2013 | ELECTRIC TACHOMETER FOR AUTOMOTIVE VEHICLES - SPECIFICATION |
| PREN 50502 : DRAFT 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRIC EQUIPMENT IN TROLLEY BUSES - SAFETY REQUIREMENTS AND CONNECTION SYSTEMS |
| 05/30127980 DC : DRAFT JAN 2005 | ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| BS EN 50502:2015 | Railway applications. Rolling stock. Electric equipment in trolley buses. Safety requirements and current collection systems |
| TS 136 124 : 13.1.0 | LTE; EVOLVED UNIVERSAL TERRESTRIAL RADIO ACCESS (E-UTRA); ELECTROMAGNETIC COMPATIBILITY (EMC) REQUIREMENTS FOR MOBILE TERMINALS AND ANCILLARY EQUIPMENT (3GPP TS 36.124 VERSION 14.1.0 RELEASE 14) |
| PREN 45501 : DRAFT 2011 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| I.S. EN 50498:2010 | |
| ISO 14230-1:2012 | Road vehicles — Diagnostic communication over K-Line (DoK-Line) — Part 1: Physical layer |
| ISO 22900-1:2008 | Road vehicles — Modular vehicle communication interface (MVCI) — Part 1: Hardware design requirements |
| EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles - Performance requirements |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| CEI EN 50291-2 : 2011 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| UNE-EN 13611:2016 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| IEEE 802.3-2012 | IEEE Standard for Ethernet |
| BS EN 50291-2:2010 | Electrical apparatus for the detection of carbon monoxide in domestic premises Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft. Additional test methods and performance requirements |
| UNE-EN 50498:2011 | Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
| ISO/IEC/IEEE 8802-3:2017 | Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 3: Standard for Ethernet |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 11992-1:2003 | Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 1: Physical and data-link layers |
| IEC 61851-21-1:2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
| DIN EN 45501:2016-03 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| DIN EN ISO 14982:2009-12 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| 16/30350012 DC : 0 | BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
| IEC 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| ISO/TS 14907-1:2015 | Electronic fee collection Test procedures for user and fixed equipment Part 1: Description of test procedures |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| IEC 60601-1-2:2007 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests |
| BS EN 230:2005 | Automatic burner control systems for oil burners |
| UNE-EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN 624:2011 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| EN 230:2005 | Automatic burner control systems for oil burners |
| 12/30159217 DC : 0 | BS EN 60601-1-2 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| IEEE 1725-2011 | IEEE Standard for Rechargeable Batteries for Cellular Telephones |
| TR 103 400 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); IMPACT OF CENELEC EN 55035 ON ETSI EMC STANDARDS |
| 13/30268103 DC : 0 | BS ISO 27145-6 - ROAD VEHICLES - IMPLEMENTATION OF WORLD-WIDE HARMONIZED ON-BOARD DIAGNOSTICS (WWH-OBD) COMMUNICATION REQUIREMENTS - PART 6: EXTERNAL TEST EQUIPMENT |
| ISO/TR 7637-5:2016 | Road vehicles Electrical disturbances from conduction and coupling Part 5: Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 |
| I.S. EN 230:2005 | AUTOMATIC BURNER CONTROL SYSTEMS FOR OIL BURNERS |
| 12/30257022 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS |
| BS ISO 27145-6:2015 | Road vehicles. Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements External test equipment |
| BS ISO 7635:2006 | Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures |
| 09/30201902 DC : 0 | BS EN 624 - SPECIFICATION FOR DEDICATED LPG APPLIANCES - ROOM SEALED LPG SPACE HEATING EQUIPMENT FOR INSTALLATION IN VEHICLES AND BOATS |
| BS EN 62215-3:2013 | Integrated circuits. Measurement of impulse immunity Non-synchronous transient injection method |
| BS ISO 26262-5:2011 | Road vehicles. Functional safety Product development at the hardware level |
| 06/30145537 DC : 0 | EN 50436-2 - ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 2: INSTRUMENTS FOR GENERAL PREVENTIVE USE |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| DEFSTAN 61-5(PT6)/6(2009) : 2009 | NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS |
| OIML R 76-1 : 2006 | NON-AUTOMATIC WEIGHING INSTRUMENTS - PART 1: METROLOGICAL AND TECHNICAL REQUIREMENTS - TESTS |
| DD IEC/TS 62228:2007 | Integrated circuits. EMC evaluation of CAN transceivers |
| NF EN 300676 : 2003 | |
| SAE J1113/12_201711 | Electrical Interference by Conduction and Coupling - Capacitive and Inductive Coupling via Lines Other than Supply Lines |
| UNE-ISO 14230-1:2015 | Road vehicles. Diagnostic communication over K-Line (DoK-Line). Part 1: Physical layer. |
| NF ETS 300 329 : 1999 | |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| NF EN 300339 : 2000 | |
| CEI 79-56 : 2009 | BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| BS EN 13611:2015 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements |
| PREN 50436-1 : DRAFT 2012 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 7635:2006 | Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures |
| I.S. EN 50291-2:2010 | ELECTRICAL APPARATUS FOR THE DETECTION OF CARBON MONOXIDE IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES INCLUDING RECREATIONAL CRAFT - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| S.R. CEN TR 16152:2011 | ELECTRONIC FEE COLLECTION - PERSONALISATION AND MOUNTING OF FIRST MOUNT OBE |
| DIN EN 624:2011-10 | Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats |
| DIN EN 13309:2010-12 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| IEC 62228-2:2016 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| BS EN ISO 14982:2009 | Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
| BS ISO 21848:2005 | Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads |
| BS EN 13309:2010 | Construction machinery. Electromagnetic compatibility of machines with internal power supply |
| I.S. EN 13611:2015/AC:2016 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| EN 62228-2:2017 | Integrated circuits - EMC evaluation of transceivers - Part 2: LIN transceivers |
| EN 50498:2010 | Electromagnetic compatibility (EMC) - Product family standard for aftermarket electronic equipment in vehicles |
| EN 50194-2 : 2006 AMD 1 2016 | ELECTRICAL APPARATUS FOR THE DETECTION OF COMBUSTIBLE GASES IN DOMESTIC PREMISES - PART 2: ELECTRICAL APPARATUS FOR CONTINUOUS OPERATION IN A FIXED INSTALLATION IN RECREATIONAL VEHICLES AND SIMILAR PREMISES - ADDITIONAL TEST METHODS AND PERFORMANCE REQUIREMENTS |
| EN 50291-2:2010 | Electrical apparatus for the detection of carbon monoxide in domestic premises - Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises including recreational craft - Additional test methods and performance requirements |
| EN 45501 : 2015 | METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS |
| EN 62215-3:2013 | Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method |
| CEN ISO/TS 14907-1:2015 | Electronic fee collection - Test procedures for user and fixed equipment - Part 1: Description of test procedures (ISO/TS 14907-1:2015) |
| EN 50436-1 : 2014 COR 2016 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| CSA C22.2 No. 60601.1.2 : 2016 | MEDICAL ELECTRICAL EQUIPMENT - PART 1-2: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: ELECTROMAGNETIC DISTURBANCES - REQUIREMENTS AND TESTS |
| OVE/ONORM EN 50436-1 : 2014 | ALCOHOL INTERLOCKS - TEST METHODS AND PERFORMANCE REQUIREMENTS - PART 1: INSTRUMENTS FOR DRINK-DRIVING-OFFENDER PROGRAMS |
| ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 21848:2005 | Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
| ISO 8854:2012 | Road vehicles — Alternators with regulators — Test methods and general requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.