ISO 7240-25:2010
Current
The latest, up-to-date edition.
Fire detection and fire alarm systems — Part 25: Components using radio transmission paths
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
11-05-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 7240-25:2010 specifies requirements, test methods and performance criteria for components used in fire detection and alarm systems, installed in and around buildings, which use radio-frequency (r.f.) transmission paths. It specifies requirements for the assessment of conformance of the components to the requirements of ISO 7240-25:2010.
Where components work together and this requires knowledge of the system design, ISO 7240-25:2010 also specifies requirements for the system.
When the fire detection and alarm system uses wired and r.f. transmission paths, the relevant parts of ISO 7240 apply together with ISO 7240-25:2010. Requirements relevant to wire transmission paths are superseded or modified by those included in ISO 7240-25:2010.
ISO 7240-25:2010 does not restrict the intended use of radio spectrum, e.g. frequency, power output of devices; the allowed maximum number of the components using r.f. transmission paths within the fire detection and alarm system or one wire transmission path and/or r.f. transmission path; or the allowed maximum number of the components affected by loss of one wire transmission path and/or r.f. transmission path.
| Committee |
ISO/TC 21/SC 3
|
| DevelopmentNote |
Supersedes ISO/DIS 7240-25. (05/2010)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NEN ISO 7240-25 : 2010 | Identical |
| AS ISO 7240.25:2015 | Identical |
| 12/30249483 DC | BS ISO 7240-14. Fire detection and alarm systems. Part 14. Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 7240-18:2017 | Fire detection and alarm systems — Part 18: Input/output devices |
| ISO 7240-4:2003 | Fire detection and alarm systems Part 4: Power supply equipment |
| ISO 7240-2:2003 | Fire detection and alarm systems Part 2: Control and indicating equipment |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| ISO 7240-11:2011 | Fire detection and alarm systems Part 11: Manual call points |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60068-2-42:2003 | Environmental testing - Part 2-42: Tests - Test Kc: Sulphur dioxide test for contacts and connections |
| ISO 7240-13:2005 | Fire detection and alarm systems Part 13: Compatibility assessment of system components |
| ISO 7240-5:2012 | Fire detection and alarm systems Part 5: Point-type heat detectors |
| IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
| EN 50130-4:2011/A1:2014 | ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.