ISO 5725-3:1994
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
28-06-2023
Superseded by
Published date
22-12-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies four intermediate measures due to changes in observation conditions (time, calibration, operator and equipment) within a laboratory. These intermediate measures can be established by an experiment within a specific laboratory or by an interlaboratory experiment. Furthermore, discusses the implications of the definitions of intermediate precision measures, presents guidance on the interpretation and application of the estimates of intermediate precision measures in practical situations, discusses the connections between trueness and measurement conditions.
| Committee |
ISO/TC 69/SC 6
|
| DevelopmentNote |
Along with ISO 5725-1, ISO 5725-2, ISO 5725-4, ISO 5725-5 and ISO 5725-6, it supersedes ISO 5725. (04/2001) Supersedes NEN ISO 5725. (01/2003)
|
| DocumentType |
Standard
|
| Pages |
25
|
| ProductNote |
this standard also refers iso guide 33:1989,iso 3534-3:1985
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DS ISO 5725-3 : 1995 COR 1 2002 | Identical |
| NBN ISO 5725 3 : 1996 | Identical |
| DIN ISO 5725-3:2003-02 | Identical |
| SAC GB/T 6379-3 : 2012 | Identical |
| UNI ISO 5725-3 : 2004 | Identical |
| BIS IS 15393-3 : 2003 | Identical |
| NF ISO 5725-3 : 1994 | Identical |
| PN ISO 5725-3 : 2002 | Identical |
| BS ISO 5725-3:1994 | Identical |
| GOST R ISO 5725-3 : 2002 | Identical |
| UNE-EN 12014-2:2018 | Identical |
| UNE 82009-3:1999 | Identical |
| JIS Z 8402-3:1999 | Identical |
| DD CEN/TS 15916-1:2011 | Copper and copper alloys. Determination of tellurium content Low tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| BS EN 15915:2010 | Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS) |
| ISO 17053:2005 | Steel and iron — Determination of oxygen — Infrared method after fusion under inert gas |
| BS EN ISO 17715:2014 | Flour from wheat (Triticum aestivum L.). Amperometric method for starch damage measurement |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| CSA ISO 15197 : 2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| 09/30206298 DC : 0 | BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| BS ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| BS EN 15703-2:2014 | Copper and copper alloys. Determination of manganese content Flame atomic absorption spectrometric method (FAAS) |
| 10/30218038 DC : DRAFT MAY 2010 | BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| 17/30341492 DC : 0 | BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS |
| BS EN ISO 13843:2017 | Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods |
| 02/101929 DC : DRAFT FEB 2002 | PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION |
| UNI EN 16117-1 : 2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85% |
| 04/30114476 DC : DRAFT JUN 2004 | EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| I.S. EN 12506:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| 04/30114470 DC : DRAFT JUN 2004 | EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD |
| 16/30310656 DC : 0 | BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS |
| PD CEN/TR 10354:2011 | Chemical analysis of ferrous Materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry |
| DIN EN 15022-4:2012-01 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| BS EN 10351:2011 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| BS ISO 16638-1 : 2015 COR 2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS |
| S.R. CEN/TR 10353:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF AL, TI AND P BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| ISO 28218:2010 | Radiation protection Performance criteria for radiobioassay |
| 07/30159086 DC : 0 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| 08/30153135 DC : 0 | BS ISO 28218 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR RADIOBIOASSAY |
| BS ISO 27048:2011 | Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure |
| BIS IS 15393-6 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| 16/30340978 DC : 0 | BS ISO 19983 - RUBBER - DETERMINATION OF PRECISION OF TEST METHODS |
| BS 6200-3.40.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content |
| NF EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| DIN EN 15605:2010-12 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN EN ISO 27971:2015-11 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| UNI EN 15616 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| PD ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| BS ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method |
| 04/30118518 DC : DRAFT AUG 2004 | EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| BS ISO 37:2017 | Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
| 07/30160477 DC : 0 | BS EN 15622 - COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| BS EN 15622:2010 | Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS) |
| 10/30219236 DC : DRAFT DEC 2010 | BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| BS EN ISO 11876:2010 | Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method |
| DIN ISO 5725-6:2002-08 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES |
| 11/30218023 DC : 0 | BS EN ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| BS ISO 14127:2008 | Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents |
| 04/30114464 DC : DRAFT JUN 2004 | EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| BS 6043-3.4:2000 | Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method |
| 09/30151431 DC : 0 | BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| 14/30196840 DC : 0 | BS ISO 19272 - LOW ALLOYED STEEL - DETERMINATION OF TEN ELEMENTS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (ROUTINE METHOD) |
| DIN EN 15616:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 14/30283682 DC : 0 | BS ISO 14707 - SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE |
| ISO 20391-1:2018 | Biotechnology — Cell counting — Part 1: General guidance on cell counting methods |
| BS ISO 11877:2008 | Hardmetals. Determination of silicon in cobalt metal powders. Photometric method |
| DD ISO/TS 13899-3:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of W content |
| 15/30318244 DC : 0 | BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
| 04/30118511 DC : DRAFT AUG 2004 | EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| UNE-EN 15023-3:2011 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| 08/30181397 DC : DRAFT APR 2008 | BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| BS ISO 17058:2004 | Steel and iron. Determination of arsenic content. Spectrophotometric method |
| PREN 16117-2 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| 13/30288136 DC : 0 | BS EN 15703-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS 6200-3.11.3:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt Flame atomic absorption spectrometric method |
| 17/30312516 DC : 0 | BS EN ISO 4945 - STEEL - DETERMINATION OF NITROGEN - SPECTROPHOTOMETRIC METHOD |
| ISO 14127:2008 | Carbon-fibre-reinforced composites — Determination of the resin, fibre and void contents |
| BS EN 15690-2:2009 | Copper and copper alloys. Determination of iron content Flame atomic absorption spectrometric method (FAAS) |
| 03/306294 DC : DRAFT APR 2003 | EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS |
| 16/30348268 DC : 0 | BS EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 13468-2 : 1999 AMD 16335 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - DOUBLE-BEAM INSTRUMENT |
| 07/30150368 DC : 0 | ISO 16918-1 - IRON AND STEEL - DETERMINATION OF NINE ELEMENTS BY THE INDUCTIVELY COUPLED PLASMA ATOMIC MASS SPECTROSCOPIC METHOD - PART 1: DETERMINATION OF TIN, ANTIMONY, CERIUM, LEAD AND BISMUTH |
| BS ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| UNE-EN 16117-1:2012 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| BS ISO 15790:2004 | Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty |
| CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| BIS IS/ISO 10012 : 2003(R2009) | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| DIN EN ISO 520:2011-03 | Cereals and pulses - Determination of the mass of 1 000 grains (ISO 520:2010) |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| I.S. EN ISO 17718:2014 | WHOLEMEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE (ISO 17718:2013) |
| DIN EN 10351:2011-05 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| ISO 12985-1:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method |
| I.S. EN ISO 520:2010 | CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| I.S. EN 60456:2016 | CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE |
| CEI UNI 70099 : 2010 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| I.S. EN ISO 18369-1:2017 | OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01) |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| I.S. EN 15703-2:2014 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 19730:2008 | Soil quality — Extraction of trace elements from soil using ammonium nitrate solution |
| I.S. EN 12014-2:2017 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
| S.R. CEN/TS 16800:2015 | GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS |
| ISO 1169:2006 | Zinc alloys — Determination of aluminium content — Titrimetric method |
| I.S. EN ISO 13468-1:1997 | PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT |
| ISO 15790:2004 | Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty |
| UNI CEN/TS 16011 : 2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| I.S. EN ISO 15112:2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| CEI UNI EN ISO/IEC 17025 : 2008 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| UNE-EN 15616:2014 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
| UNE-EN ISO 17718:2015 | Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013) |
| DIN EN 15024-2:2007-01 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNE-EN 10351:2012 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| UNI EN 15915 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| IEC 60456:2010 | Clothes washing machines for household use - Methods for measuring the performance |
| DIN EN 14936-1:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| DIN EN 14185-2:2006-08 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| DIN EN 13040:2008-01 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| BS EN 12697-38:2004 | Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration |
| BS EN 10184:2006 | Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method |
| UNE-EN ISO 14556:2016 | Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015) |
| BS EN ISO 9913-2:2000 | Optics and optical instruments. Contact lenses Determination of oxygen permeability and transmissibility by the coulometric method |
| BS EN 14662-4:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by thermal desorption and gas chromatography |
| BS EN 14940-2:2006 | Copper and copper alloys. Determination of chromium content FAAS method |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN 14937-2:2006 | Copper and copper alloys. Determination of antimony content FAAS method |
| BS EN ISO 14556:2015 | Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method |
| I.S. EN 61223-2-6:2007 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| I.S. EN ISO 20743:2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013) |
| DIN EN 12506:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN |
| CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| EN 12506:2003 | Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn |
| DIN EN ISO 489:1999-08 | Plastics -Determination of refractive index (ISO 489:1999) |
| DIN EN 15915:2010-12 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 12441-9:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
| DIN EN 12441-8:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
| EN 12441-10:2004 | Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
| EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method |
| DIN EN 15062:2006-08 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| DIN EN ISO 13900:2002-10 | STEEL - DETERMINATION OF HIGH BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD AFTER DISTILLATION |
| DIN EN 14939:2006-09 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN 14938-2:2010 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 10361:2015 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| EN 13503-3 : 2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| EN 15023-3:2010 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15025:2006 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS) |
| EN ISO 11979-3:2012 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| EN 12441-8:2004 | Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method |
| EN 10351:2011 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method] |
| EN 10355:2013 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| EN 10184:2006 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| EN 15022-4:2011 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15022-4:2006 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN 14242:2004-12 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| DIN EN 14941:2006-09 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| CEN/TS 15605:2007 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| EN 12441-9:2004 | Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method |
| DIN EN 12441-7:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction |
| CR 14377:2002 | Air quality - Approach to uncertainty estimation for ambient air reference measurement methods |
| BS EN ISO 7235:2009 | Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss |
| I.S. EN 14242:2004 | ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS |
| 11/30252539 DC : 0 | BS EN 10355 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO, SN [ROUTINE METHOD] |
| 17/30334867 DC : 0 | BS ISO 7305 - MILLED CEREAL PRODUCTS - DETERMINATION OF FAT ACIDITY |
| I.S. EN ISO 11876:2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| BS ISO 19272:2015 | Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method) |
| 14/30275429 DC : 0 | BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM |
| DD CEN/TS 15022-4:2006 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometry method (FAAS) |
| 04/30103818 DC : DRAFT JUL 2004 | ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| UNE-EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| 04/30114467 DC : DRAFT JUN 2004 | EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD |
| 18/30318762 DC : 0 | BS ISO 20258 - MAGNESIUM LITHIUM ALLOYS - DETERMINATION OF LITHIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| I.S. CR 14377:2002 | AIR QUALITY - APPROACH TO UNCERTAINTY ESTIMATION FOR AMBIENT AIR REFERENCE MEASUREMENT METHODS |
| BS EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| I.S. EN 16117-2:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| UNE-ISO 37:2013 | Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
| ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
| DIN EN 15916-2:2010-12 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| BS EN 16117-2:2012 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content higher than 99,80 % |
| 04/30118515 DC : DRAFT AUG 2004 | EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD |
| UNI EN ISO 520 : 2011 | CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS |
| 12/30208986 DC : 0 | BS ISO 13933 - STEEL AND IRON - DETERMINATION OF CALCIUM AND MAGNESIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD |
| UNI EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| I.S. CEN TS 14938-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| BS EN 10361:2015 | Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method |
| BS EN ISO 16638-1:2017 | Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds |
| 04/30114482 DC : DRAFT JUN 2004 | EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD |
| UNE-EN 15025:2011 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| 04/30118503 DC : DRAFT AUG 2004 | EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD |
| 12/30237514 DC : 0 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| I.S. EN 13503-3:2000 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| ANSI CGATS/ISO 15790 : 2005(R2007) | GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY |
| 04/30114488 DC : DRAFT JUN 2004 | EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD |
| UNI EN ISO 11876 : 2010 | HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 09/30196425 DC : 0 | BS EN ISO 520 - CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS |
| PD ISO/TS 17822-1:2014 | <i>In</i> <i>vitro</i> diagnostic test systems. Qualitative nucleic acid-based <i>in</i> <i>vitro</i> examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions |
| BS EN ISO 10720:2007 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas |
| BS 6200-3.40.2:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content |
| PD ISO/TR 22305:2008 | Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| 16/30341731 DC : 0 | BS EN 12014-2 - FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
| PD CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| DD ISO/TS 19036 : 2006 | MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS |
| 12/30256275 DC : 0 | BS ISO 17718 - WHOLE MEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE |
| ISO 10153:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method |
| OIML V 2-200 : 2012 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
| BS EN ISO 15193:2009 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures |
| UNI EN 14938-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 14938-2:2010 | Copper and copper alloys. Determination of bismuth content Flame atomic absorption spectrometric method (FAAS) |
| 04/30118971 DC : DRAFT DEC 2004 | ISO 20553 - RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL |
| DIN EN 15025:2010-12 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| 10/30233988 DC : 0 | BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| DIN ISO 19730:2009-07 | SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION |
| S.R. CEN/TR 10345:2013 | GUIDELINE FOR STATISTICAL DATA TREATMENT OF INTER LABORATORY TESTS FOR VALIDATION OF ANALYTICAL METHODS |
| UNI ISO/TS 21749 : 2009 | MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS |
| DIN ISO 5725-2:2002-12 | Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002) |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| PD ISO GUIDE 35:2017 | Reference materials. Guidance for characterization and assessment of homogeneity and stability |
| DIN EN ISO 15351:2010-08 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| DIN EN 16117-1:2011-12 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| BS EN 16117-1:2011 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content less than 99,85 % |
| 03/316092 DC : DRAFT SEP 2003 | ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY |
| 09/30210423 DC : 0 | BS EN ISO 15350 - STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| BS ISO 15112 : 2011 | NATURAL GAS - ENERGY DETERMINATION |
| UNI EN 15690-2 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 07/30161913 DC : 0 | EN 15656 - COPPER AND COPPER ALLOYS - DETERMINATION OF PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD |
| UNI EN 15023-3 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15022-4 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 17053:2005 | Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas |
| ISO 15355:1999 | Steel and iron — Determination of chromium content — Indirect titration method |
| 17/30344626 DC : 0 | BS EN ISO 7971-3 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD |
| UNI EN 15025 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30118507 DC : DRAFT AUG 2004 | EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD |
| BS ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials Sampling of particulate materials |
| 04/30114485 DC : DRAFT JUN 2004 | EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD |
| BS ISO TR 5168:1998 | Measurement of fluid flow. Evaluation of uncertainties |
| BS ISO 8178-2:2008 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions |
| I.S. EN 15022-4:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| DIN EN 15690-2:2009-07 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNI ISO 11462-1 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC |
| UNI CEN/TR 10345 : 2008 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| UNE-EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| I.S. EN ISO 13468-2:2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| ISO 19272:2015 | Low alloyed steel Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method) |
| BS EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| UNI EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN ISO 15796:2008 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| I.S. EN 15915:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 10351:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN ISO 16638-1:2017 | RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015) |
| ISO/TR 5168:1998 | Measurement of fluid flow Evaluation of uncertainties |
| I.S. CEN TS 15022-4:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| ISO/TR 24498:2006 | Paper, board and pulps Estimation of uncertainty for test methods |
| I.S. EN 15605:2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
| ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| BIS IS 16179-1 : 2014 | STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES |
| UNE-EN ISO 18113-1:2012 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| PREN ISO 20483 : DRAFT 2012 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO/DIS 20483:2012) |
| ASTM D 7448 : 2016 : REDLINE | Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke |
| EN ISO 7971-3:2009 | Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009) |
| DIN EN 12697-38:2004-10 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004 |
| DIN EN ISO 14556:2016-02 | METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015) |
| DIN EN ISO 11979-3:2013-04 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| DIN EN ISO 20483:2014-03 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013) |
| DIN EN ISO 20743:2013-12 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| BS EN 12441-9:2004 | Zinc and zinc alloys. Chemical analysis Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method |
| BS EN ISO 20743:2013 | Textiles. Determination of antibacterial activity of textile products |
| ISO 13900:1997 | Steel — Determination of boron content — Curcumin spectrophotometric method after distillation |
| ISO 10338:1996 | Optics and optical instruments — Contact lenses — Determination of curvature |
| BS EN 14941:2006 | Copper and copper alloys. Determination of cobalt content. FAAS method |
| I.S. EN ISO 15197:2015 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| I.S. EN ISO 7235:2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| DIN EN 13370:2003-09 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-] |
| I.S. EN 10318:2005 | DETERMINATION OF THICKNESS AND CHEMICAL COMPOSITION OF ZINC-AND ALUMINIUM-BASED METALLIC COATINGS - ROUTINE METHOD |
| I.S. EN ISO 20483:2013 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013) |
| I.S. EN 13040:2007 | SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY |
| I.S. EN 13656:2002 | CHARACTERISATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]) AND HYDROCHLORIC (HCI) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS |
| I.S. EN ISO 11609:2017 | DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017) |
| DIN EN ISO 10720:2007-06 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| I.S. EN ISO 14556:2015 | METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015) |
| I.S. EN ISO 11979-3:2012 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012) |
| DIN EN ISO 7235:2010-01 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| DIN EN 12441-10:2005-03 | Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method |
| UNI EN ISO 21570 : 2013 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
| DIN EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| BS 4401-6:1996 | Methods of test for meat and meat products Determination of chloride content (Volhard method) |
| BIS IS 15393-5 : 2003(R2009) | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD |
| VDI/VDE 2645 Blatt 2:2014-09 | Capability test for fastening technology - Machine capability test - MCT |
| BS 2782-5.531A(1999) : 1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| VDE 0370-16 : 1999 | INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| ISO 13898-2:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content |
| UNI CEN/TS 15916-1 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Elements of SPC |
| BIS IS 16086 : 2013 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| BS EN ISO 27971:2015 | Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| I.S. EN 15690-2:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN ISO 5725-1:1997-11 | Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions (ISO 5725-1:1994) |
| 04/30114461 DC : DRAFT JUN 2004 | EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD |
| ISO/TR 21074:2016 | Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel |
| 04/30114473 DC : DRAFT JUN 2004 | EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD |
| 04/30114479 DC : DRAFT JUN 2004 | EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD |
| BS ISO 28218:2010 | Radiation protection. Performance criteria for radiobioassay |
| BS EN 16192:2011 | Characterization of waste. Analysis of eluates |
| BS EN 15616:2012 | Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS) |
| BS ISO 17718 : 2013 | WHOLEMEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE |
| UNI EN 15916-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method |
| 14/30289810 DC : 0 | BS EN ISO 14556 - METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD |
| DIN EN 16192:2012-02 | Characterization of waste - Analysis of eluates |
| ISO/TS 14167:2003 | Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines |
| NF EN 10351 : 2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD] |
| I.S. EN ISO 10012:2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| BS EN 15428:2007 | Soil improvers and growing media. Determination of particle size distribution |
| BS ISO 13933:2014 | Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method |
| DIN EN 15428:2007-11 | Soil improvers and growing media - Determination of particle size distribution |
| PD ISO/TS 10719:2016 | Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace |
| 03/317065 DC : DRAFT NOV 2003 | ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1 |
| UNI EN 15622 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| PD CEN/TS 16800:2015 | Guideline for the validation of physico-chemical analytical methods |
| DIN EN ISO 15193:2009-10 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| 03/304751 DC : DRAFT APR 2003 | IEC 61223-3-5 ED.1.0 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| 09/30205176 DC : 0 | ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY |
| UNE-EN 15690-2:2010 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| 04/30107827 DC : DRAFT JAN 2004 | ISO 17925 - ZINC AND/OR ALUMINIUM BASED COATINGS ON STEEL - DETERMINATION OF MASS PER UNIT AREA AND CHEMICAL COMPOSITION - GRAVIMETRY, INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY AND FLAME ATOMIC ABSORPTION SPECTROMETRY |
| BS ISO 17715 : 2013 | FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT |
| UNI EN 15605 : 2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| BS ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results General principles and definitions |
| 07/30113186 DC : 0 | BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS |
| UNE-EN 15916-2:2011 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| BS ISO 12787:2011 | Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques |
| BIS IS 7920-1 : 2012(R2017) | STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY |
| UNE-CEN/TS 15916-1:2012 EX | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| S.R. CEN TS 15605:2007 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| 04/30122896 DC : DRAFT SEP 2004 | ISO 15112 - NATURAL GAS - ENERGY DETERMINATION |
| UNE-ISO/IEC GUIA 99:2012 IN | International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
| BS EN ISO 15351:2010 | Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| DD CEN/TS 15025:2006 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS) |
| 12/30257568 DC : 0 | BS ISO 17715 - FLOUR FROM WHEAT (TRICUM AESTIVUM) - METHOD FOR THE MEASUREMENT OF DAMAGE TO STARCH USING AN AMPEROMETRIC METHOD |
| BS EN 15022-4:2011 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometric method (FAAS) |
| UNE-EN ISO 16638-1:2018 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| 07/30166049 DC : 0 | BS EN 15703-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| BS 6200-3.40.4:1997 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content |
| BIS IS/ISO/IEC 17025 : 2005 AMD 1 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| DIN EN ISO 7971-3:2010-01 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD |
| I.S. CEN TS 15025:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| 14/30296672 DC : 0 | BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS |
| BS ISO 19730:2008 | Soil quality. Extraction of trace elements from soil using ammonium nitrate solution |
| ISO 11435:2011 | Nickel alloys Determination of molybdenum content Inductively coupled plasma/atomic emission spectrometric method |
| EN ISO 20743:2013 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| UNE-EN ISO 520:2011 | Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010) |
| BS ISO/IEC TR 13233:1995 | Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services |
| UNE-EN 15915:2011 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| UNI ISO 11648-2 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS |
| DIN EN 10355:2013-11 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
| ISO 3750:2006 | Zinc alloys — Determination of magnesium content — Flame atomic absorption spectrometric method |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ISO/TR 17055:2002 | Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method |
| ISO/TS 10719:2016 | Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace |
| ISO 12985-2:2000 | Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method |
| I.S. EN ISO 13843:2017 | WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017) |
| I.S. EN 16192:2011 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| I.S. EN 15916-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| S.R. CR 10299:1999 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTINE METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY |
| UNI EN ISO 15796 : 2009 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| I.S. CEN TS 15023-3:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| ISO 13899-2:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content |
| UNE-EN 10355:2014 | Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| UNE-EN 14938-2:2012 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN ISO 15112 E : 2014 | NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011) |
| I.S. EN 10361:2015 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| UNI EN ISO 15351 : 2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| IPC TM 650-MDP : 2012 | IPC TEST METHOD DEVELOPMENT PACKET |
| ISO/TS 18223:2015 | Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method |
| EN ISO 15349-2:2003 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| ISO 22725:2007 | Nickel alloys Determination of tantalum Inductively coupled plasma atomic emission spectrometric method |
| ISO 18632:2010 | Alloyed steel Determination of manganese Potentiometric and visual titration method |
| EN 12014-2:2017 | Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products |
| ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
| ISO 15353:2001 | Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO/TR 22305:2006 | Cigarettes Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances |
| ISO 14707:2015 | Surface chemical analysis Glow discharge optical emission spectrometry (GD-OES) Introduction to use |
| DIN EN 12441-11:2006-10 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| DIN EN ISO 13468-2:2006-07 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| DIN EN 15022-3:2006-12 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| BS EN 15024-2:2006 | Copper and copper alloys. Determination of zinc content Flame atomic absorption spectrometry method (FAAS) |
| IEC 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| ISO 15350:2000 | Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method) |
| UNE-EN ISO 20743:2014 | Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) |
| ISO 17718:2013 | Wholemeal and flour from wheat (Triticum aestivum L.) — Determination of rheological behaviour as a function of mixing and temperature increase |
| BS EN ISO 15349-2:2003 | Unalloyed steel. Determination of low carbon content Infrared absorption method after combustion in an induction furnace (with preheating) |
| UNE-EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| ISO 15197:2013 | In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| BS EN 12506:2003 | Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl<sup>-</sup>, Co, Cr, Cr VI, Cu, Mo, Ni, NO<sub>2</sub><sup>-</sup>, Pb, total S, SO<sub>4</sub><sup>2-</sup>, V and Zn |
| BS EN 14662-1:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by thermal desorption and gas chromatography |
| BS EN ISO 13468-2:2006 | Plastics. Determination of the total luminous transmittance of transparent materials Double-beam instrument |
| BS EN 10318:2005 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method |
| EN 13656:2002 | Characterization of waste - Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3) and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| EN ISO 15112:2014 | Natural gas - Energy determination (ISO 15112:2011) |
| EN 14937-1:2006 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| EN ISO 18113-1:2011 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| UNI EN ISO 7235 : 2009 | ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS |
| EN ISO 15351:2010 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999) |
| UNI EN ISO 11979-3 : 2013 | OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS |
| UNI EN ISO 20483 : 2014 | CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD |
| UNI EN ISO 15193 : 2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| UNE-EN ISO 17715:2015 | Flour from wheat (Triticum aestivum L.) - Amperometric method for starch damage measurement (ISO 17715:2013) |
| DIN EN 10361:2016-02 | ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| BS EN 15605:2010 | Copper and copper alloys. Inductively coupled plasma optical emission spectrometry |
| I.S. EN 15062:2006 | ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS |
| BS EN ISO 15112:2014 | Natural gas. Energy determination |
| 12/30251275 DC : 0 | BS EN ISO 20483 - CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD |
| 12/30245706 DC : 0 | BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS |
| ISO 12787:2011 | Cosmetics Analytical methods Validation criteria for analytical results using chromatographic techniques |
| I.S. EN 13370:2003 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, EASILY LIBERATABLE CN[-], F[-] |
| PREN 12014-2 : DRAFT 2016 | FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS |
| 16/30279101 DC : DRAFT MAR 2016 | BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS |
| 14/30288436 DC : 0 | BS EN ISO 27971 - CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPHIC PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY |
| BS EN ISO 15796:2008 | Gas analysis. Investigation and treatment of analytical bias |
| UNI EN 16117-2 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| ISO 29201:2012 | Water quality — The variability of test results and the uncertainty of measurement of microbiological enumeration methods |
| BS 6200-3.5.3:1998 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron Curcumin spectrophotometric method after distillation |
| DD ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| 06/30145474 DC : DRAFT JULY 2006 | ISO 11876 - HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD |
| 09/30210426 DC : 0 | BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| DIN EN 15622:2010-06 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| 11/30208525 DC : 0 | BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| BS ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values |
| 11/30244575 DC : 0 | BS EN 16117-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| DIN EN ISO 11876:2010-12 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| 04/30123610 DC : DRAFT OCT 2004 | EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD |
| 09/30191982 DC : 0 | BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION |
| I.S. EN ISO 18113-1:2011 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009) |
| 07/30150572 DC : 0 | ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS |
| BS EN 10355:2013 | Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method] |
| I.S. EN 15025:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 07/30143612 DC : 0 | ISO 8586-2 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE SELECTION, TRAINING AND MONITORING OF ASSESSORS - PART 2: EXPERT SENSORY ASSESSORS |
| BS EN 15025:2010 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS) |
| 06/30146511 DC : 0 | BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| BS EN 61620:1999 | Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method |
| BS ISO 15796 : 2005 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| EN ISO 13468-2:2006 | Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999) |
| UNI EN 10355 : 2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| PREN 15024-2 : DRAFT 2016 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI CEI 70099 : 2008 | INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
| UNE-EN 15605:2011 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN EN ISO 15796:2008-11 | GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS |
| I.S. EN ISO 15351:2010 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD) |
| S.R. CEN/TS 16011:2013 | PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION |
| BS EN ISO 18369-1:2017 | Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications |
| I.S. EN 15428:2007 | SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
| CEN/TR 10353:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
| ISO 13843:2017 | Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods |
| I.S. EN 16117-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 1: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT LESS THAN 99,85% |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO 19983:2017 | Rubber — Determination of precision of test methods |
| ISO/TS 17822-1:2014 | In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions |
| ISO 13898-3:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content |
| I.S. EN 61223-3-5:2004 | EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT |
| 17/30325894 DC : 0 | BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES |
| S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| CEN/TR 10354:2011 | Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry |
| PREN ISO 20743 : DRAFT 2012 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012) |
| UNI EN ISO 20743 : 2013 | TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS |
| CR 10299 : 1998 | GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY |
| I.S. EN ISO 7971-3:2009 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD |
| ISO/TR 15349-1:1998 | Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation) |
| ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories |
| ISO 25337:2010 | Plastics Production quality control Statistical method for using single measurements |
| ISO 16638-1:2015 | Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| S.R. CEN TS 15916-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN ISO 15193:2009 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES |
| I.S. EN 15024-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN ISO 15197:2015-12 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013) |
| BS EN 12441-10:2004 | Zinc and zinc alloys. Chemical analysis Determination of chromium and titanium in zinc alloys. Spectrophotometric method |
| ISO 21570:2005 | Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods |
| BS EN ISO 8178-2:1997 | Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site |
| ISO 520:2010 | Cereals and pulses — Determination of the mass of 1 000 grains |
| BS EN ISO 13900:2002 | Steel. Determination of boron content. Curcumin spectrophotometric method after distillation |
| BS EN 12441-7:2004 | Zinc and zinc alloys. Chemical analysis Determination of tin. Flame atomic absorption spectrometric method after extraction |
| BS EN ISO 21570 : 2005 | FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| ISO 11609:2017 | Dentistry — Dentifrices — Requirements, test methods and marking |
| BS EN 14185-2:2006 | Non fatty foods. Determination of N-methylcarbamate residues HPLC method with clean-up on a diatomaceous earth column |
| BS EN 14242:2004 | Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis |
| BS EN 15062:2006 | Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions |
| BS EN 14662-5:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by solvent desorption and gas chromatography |
| IEC 61223-2-6:2006 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests imaging performance of computed tomography X-ray equipment |
| ISO 489:1999 | Plastics Determination of refractive index |
| ISO 13468-2:1999 | Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument |
| ISO 4934:2003 | Steel and iron Determination of sulfur content Gravimetric method |
| BS EN ISO 489:1999 | Plastics. Determination of refractive index |
| ISO 10720:1997 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas |
| UNE-EN ISO 20483:2014 | Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013) |
| BS EN ISO 4934:2003 | Steel and iron. Determination of sulfur content. Gravimetric method |
| BS EN 14942-2:2006 | Copper and copper alloys. Determination of arsenic content FAAS method |
| UNE-EN 60456:2016 | Clothes washing machines for household use - Methods for measuring the performance |
| BS EN ISO 20483:2013 | Cereals and pulses. Determination of the nitrogen content and calculation of the crude protein content. Kjeldahl method |
| BS EN ISO 20988:2007 | Air quality. Guidelines for estimating measurement uncertainty |
| ISO 15796:2005 | Gas analysis — Investigation and treatment of analytical bias |
| IEC 61620:1998 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| UNE-EN ISO 7235:2010 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| ISO 17715:2013 | Flour from wheat (Triticum aestivum L.) Amperometric method for starch damage measurement |
| UNE-EN ISO 11979-3:2013 | Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) |
| UNE-EN ISO 7971-3:2010 | Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009) |
| ISO 7235:2003 | Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss |
| ISO 9913-2:2000 | Optics and optical instruments Contact lenses Part 2: Determination of oxygen permeability and transmissibility by the coulometric method |
| ISO 11876:2010 | Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method |
| ISO 15193:2009 | In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures |
| BS EN 13370:2003 | Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN<sup>-</sup>, F<sup>-</sup> |
| ISO 15351:1999 | Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method) |
| DIN EN ISO 21570:2013-08 | Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005 + Cor 1:2006 + Amd 1:2013) |
| BS EN 15022-3:2006 | Copper and copper alloys. Determination of tin content Low tin content. Flame atomic absorption spectrometry method (FAAS) |
| ISO 27971:2015 | Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology |
| ISO 18113-1:2009 | In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements |
| BS EN ISO 11979-3:2012 | Ophthalmic implants. Intraocular lenses Mechanical properties and test methods |
| UNE-EN ISO/IEC 17025:2017 | General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017) |
| ISO 20483:2013 | Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl method |
| ISO 14556:2015 | Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method |
| BS EN 14937-1:2006 | Copper and copper alloys. Determination of antimony content Spectrophotometric method |
| BS EN 13040:2007 | Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| BS EN ISO 11609:2017 | Dentistry. Dentifrices. Requirements, test methods and marking |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| ISO 11979-3:2012 | Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods |
| BS EN 14939:2006 | Copper and copper alloys. Determination of beryllium content. FAAS Method |
| BS EN 14662-2:2005 | Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by solvent desorption and gas chromatography |
| BS EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment |
| BS EN ISO 10338:1998 | Optics and optical instruments. Contact lenses. Determination of curvature |
| ISO 20743:2013 | Textiles Determination of antibacterial activity of textile products |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| BS EN 13657:2002 | Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements |
| UNE-CEN/TS 16011:2015 EX | Plastics - Recycled plastics - Sample preparation |
| BS EN ISO 15197:2015 | In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus |
| EN 15915:2010 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| EN 15690-2:2009 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN ISO 15796:2008 | Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005) |
| EN ISO 10012:2003 | Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003) |
| ONORM EN ISO 13468-2 : 2006 | PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT |
| EN 14937-2:2006 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| EN ISO 14556:2015 | Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015) |
| EN 15022-3:2006 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| EN 14662-4:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography |
| EN ISO 10338 : 1997 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| EN 14939:2006 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN ISO 20483:2013 | Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013) |
| EN ISO 15193:2009 | In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009) |
| EN 14185-2:2006 | Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column |
| EN ISO 27971:2015 | Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015) |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
| EN 16117-1:2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| EN ISO 15350:2010 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| EN 15703-2:2014 | Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 14936-2:2006 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| EN 15062:2006 | Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions |
| EN 15428:2007 | Soil improvers and growing media - Determination of particle size distribution |
| EN ISO 11876:2010 | Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010) |
| EN 14941:2006 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| EN ISO 16638-1:2017 | Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015) |
| EN 14662-5:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography |
| EN 14662-2:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography |
| EN 15916-2:2010 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 13657:2002 | Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements |
| EN 14936-1:2006 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| EN ISO 4934:2003 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN ISO 489:1999 | Plastics - Determination of refractive index (ISO 489:1999) |
| EN 14935:2006 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| EN ISO 9913-2 : 2000 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - PART 2 - DETERMINATION OF OXYGEN PERMEABILITY AND TRANSMISSIBILITY BY THE COULOMETRIC METHOD |
| EN ISO 17718:2014 | Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013) |
| I.S. EN ISO 489:1999 | PLASTICS - DETERMINATION OF REFRACTIVE INDEX |
| EN ISO 7235:2009 | Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) |
| EN ISO 11609:2017 | Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017) |
| EN ISO 20988:2007 | Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007) |
| EN ISO 10720:2007 | Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) |
| EN 14662-1:2005 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography |
| EN 14942-2:2006 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| EN ISO 13900:2002 | Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997) |
| EN ISO 520:2010 | Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010) |
| EN 14242:2004 | Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis |
| EN ISO 13468-1:1996 | Plastics - Determination of total luminous transmittance of transparent materials - Part 1: Single-beam instrument (ISO 13468-1:1996) |
| EN 14940-2:2006 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| EN ISO 17715:2014 | Flour from wheat (Triticum aestivum L.) - Amperometric method for starch damage measurement (ISO 17715:2013) |
| EN 15622:2010 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN 15023-3:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| DIN EN 14938-2:2010-12 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 15023-3:2010-12 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| PD CEN/TS 16011:2013 | Plastics. Recycled plastics. Sample preparation |
| 07/30163034 DC : 0 | BS EN 14940-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| DIN EN 16117-2:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| 02/101726 DC : 0 | PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE |
| BS ISO 13899-2:2005 | Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of Nb Content |
| DIN 53804-1:2002-04 | STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS |
| 09/30203049 DC : 0 | BS EN 10351 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN (ROUTINE METHOD) |
| BS ISO 15350 : 2001 | DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACES (ROUTINE METHOD) |
| I.S. EN ISO 4934:2004 | STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD |
| I.S. CWA 15261-2:2005 | MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING |
| DIN EN ISO 17715:2015-03 | FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT (ISO 17715:2013) |
| BS EN ISO 17718:2014 | Wholemeal and flour from wheat (Triticum aestivum L.). Determination of rheological behaviour as a function of mixing and temperature increase |
| 97/402028 DC : DRAFT FEB 1997 | BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION |
| BS ISO 18632:2010 | Alloyed steel. Determination of manganese. Potentiometric and visual titration method |
| 17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
| 04/30124942 DC : DRAFT NOV 2004 | BS EN 61223-2-6 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY |
| UNI ISO/TR 22971 : 2008 | ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PRACTICAL GUIDANCE FOR THE USE OF ISO 5725-2:1994 IN DESIGNING, IMPLEMENTING AND STATISTICALLY ANALYSING INTER-LABORATORY REPEATABILITY AND REPRODUCIBILITY RESULTS |
| 13/30291170 DC : 0 | BS EN 10361 - ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD |
| BS 7208-7(1998) : 1998 | OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| DIN EN 15703-2:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| 04/30098572 DC : DRAFT NOV 2004 | EN 12441-11 - ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 11: DETERMINATION OF SILICON IN ZINC ALLOYS - SPECTROPHOTOMETRIC METHOD |
| DIN EN ISO 18113-1:2013-01 | In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) |
| BS ISO 14707:2015 | Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use |
| PD CEN/TR 10353:2011 | Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry |
| BS ISO 17593:2007 | Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy |
| BS 6200-3.22.4(1997) : 1997 | SAMPLING AND ANALYSIS OF IRON, STEEL AND OTHER FERROUS METALS - METHODS OF ANALYSIS - DETERMINATION OF NITROGEN - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| BS EN ISO 18113-1:2011 | In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements |
| 05/30057945 DC : DRAFT APR 2005 | BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS |
| ISO/TS 13899-3:2005 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content |
| BS EN 12014-2:2017 | Foodstuffs. Determination of nitrate and/or nitrite content HPLC/IC method for the determination of nitrate content of vegetables and vegetable products |
| DD ISO/TS 21749:2005 | Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments |
| ISO 11877:2008 | Hardmetals — Determination of silicon in cobalt metal powders — Photometric method |
| DIN EN ISO 17718:2015-03 | Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013) |
| DIN EN ISO 15350:2010-08 | Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000) |
| BS ISO 19983:2017 | Rubber. Determination of precision of test methods |
| BS EN 15023-3:2010 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometric method (FAAS) |
| DD CEN/TS 15023-3:2006 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometry method (FAAS) |
| 11/30244578 DC : DRAFT JUNE 2011 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15916-2:2010 | Copper and copper alloys. Determination of tellurium content Medium tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| BS EN ISO 520:2010 | Cereals and pulses. Determination of the mass of 1000 grains |
| I.S. EN ISO 17715:2014 | FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT (ISO 17715:2013) |
| BS EN ISO 15350:2010 | Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method) |
| BS 6200-3.31.3:2002 | Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin Flame atomic absorption spectrometric method (extraction as Sn-SCN) |
| ISO 22033:2011 | Nickel alloys Determination of niobium Inductively coupled plasma/atomic emission spectrometric method |
| 16/30339666 DC : 0 | BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING |
| PD ISO GUIDE 33:2015 | Reference materials. Good practice in using reference materials |
| CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
| INCITS/ISO TS 19159-1 : 2015 | GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS |
| UNE-EN 10361:2016 | Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method |
| 07/30163942 DC : 0 | BS EN 15690-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| ISO 17925:2004 | Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry |
| BS EN ISO 7971-3:2009 | Cereals. Determination of bulk density, called mass per hectolitre Routine method |
| NF ISO 27048 : 2011 | RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE |
| UNE-EN 16192:2012 | Characterization of waste - Analysis of eluates |
| CEI EN 61620 : 1999 | INSULATING LIQUIDS DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD |
| NF EN 61620 : 1999 | INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHODS |
| I.S. EN 15622:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 10355:2013 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD] |
| PREN 15616 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| S.R. CEN/TR 10354:2011 | CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF SI AND AL BY X-RAY FLUORESCENCE SPECTROMETRY |
| UNE-EN 15022-4:2012 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN 15616:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| DIN EN ISO 15112:2014-09 | Natural gas - Energy determination (ISO 15112: 2011) |
| UNI EN ISO 15112 : 2014 | NATURAL GAS - ENERGY DETERMINATION |
| ISO/TS 19036:2006 | Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations |
| ISO 13528:2015 | Statistical methods for use in proficiency testing by interlaboratory comparison |
| ISO 11652:1997 | Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method |
| NF EN ISO 15350 : 2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| ISO 18369-1:2017 | Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications |
| ISO 13933:2014 | Steel and iron — Determination of calcium and magnesium — Inductively coupled plasma atomic emission spectrometric method |
| CEN/TR 10345:2013 | Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods |
| ISO/TS 19159-1:2014 | Geographic information — Calibration and validation of remote sensing imagery sensors and data — Part 1: Optical sensors |
| ISO 27048:2011 | Radiation protection Dose assessment for the monitoring of workers for internal radiation exposure |
| ISO 7971-3:2009 | Cereals Determination of bulk density, called mass per hectolitre Part 3: Routine method |
| I.S. EN ISO 15350:2010 | STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD) |
| UNI EN ISO 18113-1 : 2012 | IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS |
| PREN ISO 15197 : DRAFT 2011 | IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS |
| ISO/TS 13899-1:2004 | Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content |
| UNI EN 16192 : 2012 | CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES |
| EN ISO 13843:2017 | Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) |
| EN 15024-2:2018 | Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| UNI EN ISO 7971-3 : 2009 | CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD |
| ISO 15112:2011 | Natural gas Energy determination |
| I.S. EN ISO 10720:2007 | STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS |
| BS EN 60456:2016 | Clothes washing machines for household use. Methods for measuring the performance |
| I.S. EN ISO 27971:2015 | CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPH PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY (ISO 27971:2015) |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 16918-1:2009 | Steel and iron — Determination of nine elements by the inductively coupled plasma mass spectrometric method — Part 1: Determination of tin, antimony, cerium, lead and bismuth |
| ISO 8178-2:2008 | Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions |
| ISO 17058:2004 | Steel and iron — Determination of arsenic content — Spectrophotometric method |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
| I.S. EN 14938-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| ISO 13898-4:1997 | Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content |
| DIN EN 14936-2:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| DIN EN 14937-1:2006-09 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| DIN EN 14937-2:2006-09 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| DIN EN ISO 15349-2:2003-09 | Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999) |
| DIN EN 14940-2:2006-09 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| DIN EN 14942-2:2006-09 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| BS EN 13656:2002 | Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO<sub>3</sub>), and hydrochloric (HCl) acid mixture for subsequent determination of elements |
| UNE-EN ISO 15197:2015 | In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| BS EN 14936-2:2006 | Copper and copper alloys. Determination of aluminium content FAAS method |
| BS EN 12286:1999 | In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures |
| BS EN ISO 10012:2003 | Measurement management systems. Requirements for measurement processes and measuring equipment |
| BS EN 14935:2006 | Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method |
| BS EN 12441-8:2004 | Zinc and zinc alloys. Chemical analysis Detection of tin in secondary zinc. Flame atomic absorption spectrometric method |
| ISO 15349-2:1999 | Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) |
| BS EN 14936-1:2006 | Copper and copper alloys. Determination of aluminium content Titrimetric method |
| BS EN 12441-11:2006 | Zinc and zinc alloys. Chemical analysis Determination of silicon in zinc alloys. Spectrophotometric method |
| EN 61223-2-6:2007 | Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment |
| CEN/TS 15916-1:2011 | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 14662-4:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 4: DIFFUSIVE SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| CEN/TS 16011:2013 | Plastics - Recycled plastics - Sample preparation |
| EN 13040:2007 | Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density |
| CEN/TS 15023-3:2006 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS) |
| EN 13370:2003 | Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F- |
| EN 12441-7:2004 | Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction |
| DIN EN 14662-1:2005-08 | Ambient air quality - Standard method for measurement of benzene concentrations - Part 1: Pumped sampling followed by thermal desorption and gas chromatography |
| EN 61223-3-5:2004 | Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment |
| DIN EN ISO 4934:2004-05 | Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) |
| EN 12441-11:2006 | Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method |
| CEN/TS 14938-2:2006 | Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method |
| DIN EN ISO 20988:2007-09 | AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY |
| EN 15025:2010 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 12697-38:2004 | Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration |
| DIN EN 10184:2006-05 | Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method |
| DIN EN 14662-5:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 5: DIFFUSIVE SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| EN 16192:2011 | Characterization of waste - Analysis of eluates |
| DIN EN 14935:2006-09 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| DIN EN 10318:2005-08 | Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005 |
| DIN EN 14662-2:2005-08 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 2:PUMPED SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY |
| EN 15605:2010 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| EN 61620:1999 | Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method |
| CSA ISO 10012 : 2003 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| I.S. EN 14662-1:2005 | AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY |
| CSA ISO 10012 : 2003 : R2013 | MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT |
| AS 5339:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment |
| AS 5337:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane |
| AS/NZS ISO 19116:2020 | Geographic information - Positioning services |
| AS 5336:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms |
| AS 5335:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| AS 5006.2:2019 | Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method |
| AS 5333.1:2019 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room |
| ISO 3534-2:1993 | Statistics — Vocabulary and symbols — Part 2: Statistical quality control |
| SA/SNZ TS 61724.2:2020 | Photovoltaic system performance Capacity evaluation method (IEC TS 61724-2:2016, MOD) |
| SA/SNZ TS 61724.3:2020 | Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD) |
| AS 3515.2:2019 | Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method |
| AS 5333.2:2019 | Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| AS 5332:2019 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.