ISO 5459:2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
04-10-2024
Superseded by
Language(s)
French, English, Russian
Published date
10-08-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 5459:2011 specifies terminology, rules and methodology for the indication and understanding of datums and datum systems in technical product documentation. It also provides explanations to assist the user in understanding the concepts involved.
ISO 5459:2011 defines the specification operator (see ISO 17450-2) used to establish a datum or datum system. The verification operator (see ISO 17450-2) can take different forms (physically or mathematically) and is not the subject of ISO 5459:2011.
The detailed rules for maximum and least material requirements for datums are given in ISO 2692.
| Committee |
ISO/TC 213
|
| DevelopmentNote |
DRAFT ISO/DIS 5459 has been withdrawn by the publisher. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
82
|
| ProductNote |
THIS STANDARD ALSO REFERS TO ISO 1101:2004/Amd 1
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IS 10721 : 2023 | Identical |
| DIN EN ISO 5459:2013-05 | Identical |
| NF EN ISO 5459 : 2011 | Identical |
| NBN EN ISO 5459 : 2011 | Identical |
| NEN EN ISO 5459 : 2011 | Identical |
| NS EN ISO 5459 : 2011 | Identical |
| PN EN ISO 5459 : 2011 | Identical |
| SN EN ISO 5459 : 2011 | Identical |
| UNI EN ISO 5459 : 2011 | Identical |
| UNE-EN ISO 5459:2012 | Identical |
| EN ISO 5459:2011 | Identical |
| DS EN ISO 5459 : 2011 | Identical |
| NEN ISO 5459 : 1984 | Identical |
| BS 308-3:1972 | Similar to |
| BS ISO 5459:1981 | Identical |
| BS EN ISO 5459:2011 | Identical |
| UNE 1128:1995 | Identical |
| NS 1428 : 1ED 1982 | Identical |
| DIN ISO 5459:1982-01 | Identical |
| BS 308-3:1990 | Similar to |
| BIS IS 10721 : 1983(R1999) | Identical |
| SN ISO 5459 : 1991 | Identical |
| UNI ISO 5459 : 1986 | Identical |
| I.S. EN ISO 5459:2011 | Identical |
| ISO 1206:2018 | Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| DIN EN ISO 10579:2013-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
| DIN ISO 8062:1998-08 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
| BS IEC 60191-1:2007 | Mechanical standardization of semiconductor devices General rules for the preparation of outline drawings of discrete devices |
| EN IEC 60191-1:2018 | Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices |
| 14/30272936 DC : 0 | BS EN ISO 17450-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 3: TOLERANCED FEATURES |
| ISO 17450-4:2017 | Geometrical product specifications (GPS) — Basic concepts — Part 4: Geometrical characteristics for quantifying GPS deviations |
| DIN ISO 2692:1990-05 | TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL PRINCIPLE |
| I.S. EN ISO 10579:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS (ISO 10579:2010 INCLUDING COR 1:2011) |
| BS EN ISO 17450-3:2016 | Geometrical product specifications (GPS). General concepts Toleranced features |
| 17/30341082 DC : 0 | BS EN ISO 14978 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| BS 6615:1985 | Specification for dimensional tolerances for metal and metal alloy castings |
| BS ISO 10135:1994 | Technical drawings. Simplified representation of moulded, cast and forged parts |
| 12/30262686 DC : 0 | BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) |
| DIN ISO 10110-6:2016-06 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES (ISO 10110-6:2015) |
| BS EN ISO 8062-3:2007 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings |
| BS ISO 1101:1983 | Technical drawings. Geometrical tolerancing. Tolerancing of form, orientation, location and run-out. Generalities, definitions, symbols, indications on drawings |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| I.S. EN ISO 10135:2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| I.S. EN ISO 17450-3:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS PART 3: TOLERANCED FEATURES (ISO 17450-3:2016) |
| UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| ISO 7465:2007 | Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
| UNE-EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| ISO 10579:2010 | Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts |
| BS EN ISO 2692:2014 | Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| BS EN 1559-1:2011 | Founding. Technical conditions of delivery General |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| DIN EN ISO 1101:2017-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| ONORM EN ISO 8062-3 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| 17/30348146 DC : 0 | BS ISO 7063 - ROLLING BEARINGS - NEEDLE ROLLER BEARING TRACK ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| BS EN ISO 10135:2009 | Geometrical product specifications (GPS). Drawing indications for moulded parts in technical product documentation (TPD) |
| PD ISO/TS 17863:2013 | Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies |
| DIN ISO 2768-2:1991-04 | General tolerances; geometrical tolerances for features without individual tolerances indications; identical with ISO 2768-2:1989 |
| DIN ISO 128-22:1999-11 | Technical drawings - General principles of presentation - Part 22: Basic conventions and applications for leader lines and reference lines (ISO 128-22:1999) |
| DIN EN ISO 5458:2016-08 (Draft) | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| 12/30230676 DC : 0 | BS EN ISO 16792 - TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| ISO 10303-238:2007 | Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
| BS ISO 8062-4:2017 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General tolerances for castings using profile tolerancing in a general datum system |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| BS ISO 1099:2017 | Metallic materials. Fatigue testing. Axial force-controlled method |
| PD CEN ISO/TS 8062-2:2013 | Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
| CEI EN 61754-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| 15/30295117 DC : 0 | BS EN ISO 5458 - GEOMENTRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL AND PATTERN TOLERANCING |
| BS EN 61169-1:2013 | Radio-frequency connectors Generic specification. General requirements and measuring methods |
| EN ISO 7083:1994 | Technical drawings - Symbols for geometrical tolerancing - Proportions and dimensions (ISO 7083:1983) |
| BS ISO 23788:2012 | Metallic materials. Verification of the alignment of fatigue testing machines |
| UNI EN ISO 8062-3 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| DIN ISO 10110-19:2016-04 | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: GENERAL DESCRIPTION OF SURFACES AND COMPONENTS (ISO 10110-19:2015) |
| I.S. EN ISO 5459:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - DATUMS AND DATUM SYSTEMS |
| 10/30234803 DC : 0 | BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| 14/30262683 DC : 0 | BS ISO 8062-4 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 4: GENERAL TOLERANCES FOR CASTINGS USING PROFILE TOLERANCING IN A GENERAL DATUM SYSTEM |
| 05/30127444 DC : DRAFT JAN 2005 | ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS |
| UNI EN ISO 10135 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DRAWING INDICATIONS FOR MOULDED PARTS IN TECHNICAL PRODUCT DOCUMENTATION (TPD) |
| I.S. EN ISO 7083:1995 | TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS |
| BS ISO 4156-3:2005 | Straight cylindrical involute splines. Metric module, side fit Inspection |
| EN ISO 2692:2014 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| EN ISO 5458:1998 | Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) |
| UNI ISO 10579 : 1995 | TECHNICAL DRAWINGS - DIMENSIONS AND TOLERANCING - NON-RIGID-PARTS |
| NF ISO 128-1 : 2003 | TECHNICAL DRAWINGS - GENERAL PRINCIPLES OF PRESENTATION - PART 1: INTRODUCTION AND INDEX |
| BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
| I.S. EN 60191-1:2007 | MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| ISO 10110-6:2015 | Optics and photonics Preparation of drawings for optical elements and systems Part 6: Centring tolerances |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| UNI ISO 7465 : 2010 | PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| UNI EN ISO 14978 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| ISO 10303-223:2008 | Industrial automation systems and integration — Product data representation and exchange — Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts |
| DIN EN ISO 10360-6:2009-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| DIN EN 1559-1:2011-05 | Founding - Technical conditions of delivery - Part 1: General |
| UNE-EN ISO 2692:2015 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| I.S. EN ISO 14660-1:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
| DIN ISO 16792:2008-12 | TECHNICAL PRODUCT DOCUMENTATION - DIGITAL PRODUCT DEFINITION DATA PRACTICES |
| I.S. EN 22768-2:1994 | GENERAL TOLERANCES - GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| I.S. EN ISO 1101:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUN-OUT (ISO 1101:2017) |
| I.S. EN 1559-1:2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| I.S. EN ISO 2692:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
| EN 22768-2:1993 | General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) |
| I.S. EN ISO 1660:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING (ISO 1660:2017) |
| BS 308-3:1990 | Engineering drawing practice Recommendations for geometrical tolerancing |
| BS 308-1:1984 | Engineering drawing practice Recommendations for general principles |
| BS 308-2:1985 | Engineering drawing practice Recommendations for dimensioning and tolerancing of size |
| BS CECC 22000:1993 | Harmonized system of quality assessment for electronic components. Generic specification. Radio frequency coaxial connectors (Parts I, II and III) |
| BS 6615:1996 | Specification for dimensional tolerances for metal and metal alloy castings |
| 17/30348149 DC : 0 | BS ISO 3096 - ROLLING BEARINGS - NEEDLE ROLLERS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| 12/30259955 DC : 0 | BS EN 61754-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| ONORM EN ISO 14978 : 2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| CEI EN 60191-1 : 2008 | MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES |
| 12/30268851 DC | BS EN 9300-120. Aerospace series. LOTAR. Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data. CAD 3D explicit geometry with product and manufacturing information |
| BS ISO 10110-19:2015 | Optics and photonics. Preparation of drawings for optical elements and systems General description of surfaces and components |
| BS EN ISO 10579:2013 | Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts |
| 13/30272252 DC : 0 | BS ISO 10110-6 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 6: CENTRING TOLERANCES |
| BS ISO 128-22:1999 | Technical drawings. General principles of presentation Basic conventions and applications for leader lines and reference lines |
| BS ISO 8788:2000 | Aerospace. Nuts, metric. Tolerances of form and position |
| 09/30200834 DC : 0 | BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| DIN EN ISO 8062-3:2008-09 | Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) |
| UNE-EN ISO 17450-3:2017 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| BS ISO 10303-47:1997 | Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
| BS EN ISO 5458:1999 | Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing |
| S.R. CEN ISO/TS 8062-2:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| ISO 8062-4:2017 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 4: General tolerances for castings using profile tolerancing in a general datum system |
| ISO 4156-3:2005 | Straight cylindrical involute splines Metric module, side fit Part 3: Inspection |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| I.S. EN ISO 14978:2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| ISO 10303-224:2006 | Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features |
| IEC 60191-1:2018 | Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices |
| ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
| UNI EN ISO 10579 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
| ISO/TS 17863:2013 | Geometrical product specification (GPS) Tolerancing of moveable assemblies |
| ISO/TR 5460:1985 | Technical drawings Geometrical tolerancing Tolerancing of form, orientation, location and run-out Verification principles and methods Guidelines |
| ISO 10303-219:2007 | Industrial automation systems and integration — Product data representation and exchange — Part 219: Application protocol: Dimensional inspection information exchange |
| ISO 8788:2000 | Aerospace Nuts, metric Tolerances of form and position |
| ISO 5458:1998 | Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing |
| DIN EN ISO 2692:2015-12 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| DIN EN ISO 14978:2006-09 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS AND REQUIREMENTS FOR GPS MEASURING EQUIPMENT |
| BS EN 22768-2:1993 | General tolerances Geometrical tolerances for features without individual tolerance indications |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| IEC 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| ISO 10360-6:2001 | Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features |
| EN ISO 14660-1:1999 | Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999) |
| UNI EN ISO 10360-6 : 2005 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ACCEPTANCE AND REVERIFICATION TESTS FOR COORDINATE MEASURING MACHINES (CMM) - PART 6: ESTIMATION OF ERRORS IN COMPUTING GAUSSIAN ASSOCIATED FEATURES |
| UNI EN 1559-1 : 2011 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| DIN SPEC 91184 E : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| BS 308-2.3(1996) : 1996 | TECHNICAL DRAWINGS - DIMENSIONING AND TOLERANCING OF PROFILES |
| 99/702254 DC : DRAFT JAN 1999 | ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
| ISO 10303-519:2000 | Industrial automation systems and integration — Product data representation and exchange — Part 519: Application interpreted construct: Geometric tolerances |
| BS ISO 10110-6:2015 | Optics and photonics. Preparation of drawings for optical elements and systems Centring tolerances |
| 13/30284676 DC : 0 | BS EN ISO 1660 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - PROFILE TOLERANCING |
| EN ISO 17450-4:2018 | Geometrical product specifications (GPS) - Basic concepts - Part 4: Geometrical characteristics for quantifying GPS deviations (ISO 17450-4:2017) |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| UNI CEN ISO/TS 8062-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| DIN ISO 2768-1:1991-06 | GENERAL TOLERANCES - TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| 05/30107533 DC : DRAFT JUL 2005 | ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES |
| DIN ISO 1101:1985-03 | TECHNICAL DRAWINGS, GEOMETRICAL TOLERANCING, TOLERANCES OF FORM, ORIENTATION, LOCATION AND RUNOUT - GENERALITIES, DEFINITIONS, SYMBOLS ON DRAWINGS |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| BS EN 61754-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic connector interfaces General and guidance |
| BS 308-3.6(1995) : 1995 | TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS |
| BS ISO 492:2014 | Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
| 08/30184522 DC : DRAFT JUNE 2008 | BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS |
| BS ISO 16792:2006 | Technical product documentation. Digital product definition data practices |
| I.S. EN ISO 17450-4:2018 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - BASIC CONCEPTS - PART 4: GEOMETRICAL CHARACTERISTICS FOR QUANTIFYING GPS DEVIATIONS (ISO 17450-4:2017) |
| 17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| UNE-EN ISO 10579:2015 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
| I.S. EN IEC 60191-1:2018 | MECHANICAL STANDARDIZATION OF SEMICONDUCTOR DEVICES - PART 1: GENERAL RULES FOR THE PREPARATION OF OUTLINE DRAWINGS OF DISCRETE DEVICES |
| NF ISO 4156-3 : 2006 | STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 3: INSPECTION |
| I.S. EN ISO 8062-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| PREN ISO 2692 : DRAFT 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012) |
| ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| I.S. EN 61169-1:2013 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| EN 61169-1:2013/AC:2016-02 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
| ISO 17450-3:2016 | Geometrical product specifications (GPS) General concepts Part 3: Toleranced features |
| BS EN ISO 1101:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out |
| ISO 1660:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing |
| ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| BS EN ISO 10360-6:2001 | Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) Estimation of errors in computing Gaussian associated features |
| ISO 2768-2:1989 | General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| BS EN ISO 14660-1:2000 | Geometrical product specifications (GPS). Geometrical features General terms and definitions |
| BS EN ISO 1660:2017 | Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
| ISO 7083:1983 | Technical drawings Symbols for geometrical tolerancing Proportions and dimensions |
| EN ISO 1660:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) |
| EN ISO 1101:2017 | Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN 1559-1:2011 | Founding - Technical conditions of delivery - Part 1: General |
| EN ISO 10579:2013 | Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) |
| EN ISO 17450-3:2016 | Geometrical product specifications (GPS) - General concepts - Part 3: Toleranced features (ISO 17450-3:2016) |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN ISO 7490 : 2000 | Dental gypsum-bonded casting investments (ISO 7490:2000) |
| EN ISO 10135:2009 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| DIN EN ISO 10135:2010-02 | Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) |
| 16/30341970 DC : 0 | BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| BS ISO 2692:1988 | Technical drawings. Geometrical tolerancing. Maximum material principle |
| ISO/TR 16570:2004 | Geometrical Product Specifications (GPS) Linear and angular dimensioning and tolerancing: +/- limit specifications Step dimensions, distances, angular sizes and radii |
| BS ISO 10579 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONING AND TOLERANCING - NON-RIGID PARTS |
| BS EN ISO 5459:2011 | Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems |
| DIN ISO 5458:1988-07 | TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| ISO 10110-19:2015 | Optics and photonics Preparation of drawings for optical elements and systems Part 19: General description of surfaces and components |
| 04/30125936 DC : DRAFT NOV 2004 | ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS |
| BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| 13/30253349 DC : 0 | BS ISO 10110-19 - OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 19: OPTICAL FREEFORM SURFACES |
| BIS IS 2102-2 : 1993(R2014) | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| ISO 23788:2012 | Metallic materials — Verification of the alignment of fatigue testing machines |
| DIN 406-10:1992-12 | TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES |
| I.S. EN ISO 5458:1999 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING |
| UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
| PREN 1559-1 : DRAFT 2009 | FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL |
| ISO 16792:2015 | Technical product documentation Digital product definition data practices |
| BS EN ISO 14978:2006 | Geometrical Product Specifications (GPS). General concepts and requirements for GPS measuring equipment |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
| ISO 14978:2006 | Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment |
| I.S. EN 61754-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CONNECTOR INTERFACES - PART 1: GENERAL AND GUIDANCE |
| CEN ISO/TS 8062-2 : 2013 COR 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN ISO 7083:1995 | Technical drawings. Symbols for geometrical tolerancing. Proportions and dimensions |
| ISO/TS 8062-2:2013 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
| EN 60191-1:2007 | Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices |
| EN 61754-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 1: General and guidance |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| ISO 1101:2004 | Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 128-24:2014 | Technical drawings General principles of presentation Part 24: Lines on mechanical engineering drawings |
| ISO 3098-5:1997 | Technical product documentation — Lettering — Part 5: CAD lettering of the Latin alphabet, numerals and marks |
| ISO 7083:1983 | TECHNICAL DRAWINGS - SYMBOLS FOR GEOMETRICAL TOLERANCING - PROPORTIONS AND DIMENSIONS |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 81714-1:2010 | Design of graphical symbols for use in the technical documentation of products Part 1: Basic rules |
| ISO 2768-2:1989 | GENERAL TOLERANCES - PART 2: GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS |
| ISO 3098-0:1997 | Technical product documentation Lettering Part 0: General requirements |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.