ISO 4892-2:2013
Current
Current
The latest, up-to-date edition.
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
28-02-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4892-2:2013 specifies methods for exposing specimens to xenon-arc light in the presence of moisture to reproduce the weathering effects (temperature, humidity and/or wetting) that occur when materials are exposed in actual end-use environments to daylight or to daylight filtered through window glass.
| Committee |
ISO/TC 61/SC 6
|
| DevelopmentNote |
Supersedes ISO 4892 (04/2001) Supersedes ISO/DIS 4892-2. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 4892-2 : 2013 | Identical |
| UNI EN ISO 4892-2:2021 | Identical |
| IS 17863 : Part 2 : 2022 | Identical |
| NBN EN ISO 4892-2 : 2013 | Identical |
| NBN EN ISO 4892-3 : 2016 | Identical |
| NEN EN ISO 4892-2 : 2013 | Identical |
| NS EN ISO 4892-2 : 2013 | Identical |
| I.S. EN ISO 4892-2:2013 | Identical |
| PN EN ISO 4892-2 : 2013 | Identical |
| SAC GB/T 16422.2 : 1999 | Identical |
| SN EN ISO 4892-2 : 2013 | Identical |
| UNI EN ISO 4892-2 : 2013 | Identical |
| SS-EN ISO 4892-2:2013 | Identical |
| BS EN ISO 4892-2:2013 | Identical |
| UNE-EN ISO 4892-2:2014 | Identical |
| EN ISO 4892-2:2013 | Identical |
| NF EN ISO 4892-2 : 2013 | Identical |
| DIN EN ISO 4892-2:2013-06 | Identical |
| DIN 53387:1989-04 | Similar to |
| BS 2782-5.540E(1995) : 1995 AMD 10725 | Identical |
| I.S. EN 16434:2014-2014-08 | INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 07/30168088 DC : DRAFT AUG 2007 | BS EN 13341 AMD 1 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED POLYETHYLENE, ROTATIONALLY MOULDED POLYETHYLENE AND POLYAMIDE 6 BY ANIONIC POLYMERIZATION TANKS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| PD CEN/TS 16599:2014 | Photocatalysis. Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions |
| DIN EN ISO 19712-2:2013-04 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| 02/103631 DC : DRAFT MAY 2002 | BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS |
| 15/30313602 DC : 0 | BS ISO 25649-7 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| BS EN ISO 8936:2017 | Awnings for leisure accommodation vehicles. Requirements and test methods |
| 11/30213807 DC : 0 | BS ISO 14486 - LAMINATE FLOOR COVERINGS - LAMINATE FLOOR COVERING - SPECIFICATION |
| 14/30303794 DC : 0 | BS EN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| 06/30153650 DC : DRAFT JULY 2006 | EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| DIN EN 15752-1:2014-10 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| PREN 17142 : DRAFT 2017 | MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 04/30113782 DC : DRAFT MAY 2004 | ISO 3865 - RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| DIN EN ISO 8936:2015-09 (Draft) | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| PREN 438-2 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing |
| ISO 19821:2017 | Determination of span rating for natural fibre-reinforced plastic composite (NFC) deck boards |
| DIN EN 15534-5:2014-04 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES |
| 12/30266874 DC | BS EN 1871. Road marking materials. Paint, thermoplastic and cold plastic materials. Specifications |
| 16/30337938 DC : 0 | BS EN 80005-1 - UTILITY CONNECTIONS IN PORT - HIGH VOLTAGE SHORE CONNECTION (HVSC) SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 19712-3 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| BS EN 61969-3:2012 | Mechanical structures for electronic equipment. Outdoor enclosures Environmental requirements, tests and safety aspects |
| 16/30342057 DC : 0 | BS EN 17033 - PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| 03/319410 DC : DRAFT NOV 2003 | BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - METHOD OF TEST - ARTIFICIAL WEATHERING |
| BS ISO 11798:1999 | Information and documentation. Permanence and durability of writing, printing and copying on paper. Requirements and test methods |
| I.S. EN ISO 105-B10:2011 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011) |
| I.S. EN IEC 62561-6:2018 COR 2018 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| 05/30133040 DC : DRAFT APR 2005 | BS EN 1866 - MOBILE FIRE EXTINGUISHERS |
| 14/30310352 DC : 0 | BS EN 12200-1 - PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| BS ISO/IEC 11801-1:2017 | Information technology. Generic cabling for customer premises General requirements |
| 11/30229694 DC : 0 | BS EN ISO 11997-2 - PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| ASTM D 5071 : 2006 | Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
| UNE-EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| ISO 3917:2016 | Road vehicles Safety glazing materials Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
| I.S. EN 62561-4:2017 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS |
| S.R. CEN/TS 16359:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| DIN EN 124-6:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| PREN 62275 : DRAFT 2014 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS (IEC 62275:2013, MODIFIED) |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| DIN ISO 16938-1:2012-12 | BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 1: TEST WITH COMPRESSION (ISO 16938-1:2008) |
| BS ISO 11617:2014 | Buildings and civil engineering works. Sealants. Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling |
| I.S. EN 15534-4:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES |
| BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
| BS EN 15752-1:2014 | Glass in building. Adhesive backed polymeric film Definitions and requirements |
| BS EN 50526-1:2012 | Railway applications. Fixed Installations. D.C. surge arresters and voltage limiting devices Surge arresters |
| 15/30328730 DC : 0 | BS EN 60794-1-22 - OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
| 17/30351022 DC : 0 | BS EN 14836 - SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| 04/19987165 DC : DRAFT SEP 2004 | BS EN 13200-4 - SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT REQUIREMENTS |
| BS EN 60794-1-22:2012 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ISO 3865:2005 | Rubber, vulcanized or thermoplastic Methods of test for staining in contact with organic material |
| 12/30238119 DC : 0 | BS ISO 18937 - IMAGING MATERIALS - PHOTOGRAPHIC REFLECTION PRINTS - METHODS FOR MEASURING INDOOR LIGHT STABILITY |
| 08/30194268 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| 01/107289 DC : DRAFT OCT 2001 | BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS |
| I.S. EN 17098-1:2018 | PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| BS 2782-5.540F(1995) : AMD 10678 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS |
| 96/709570 DC : DRAFT JUL 1996 | PREN 10285 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| BS IEC 62790 : 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| PREN 12574-2 : DRAFT 2015 | STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| CEI EN 62561-6 : 2012 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| 09/30197921 DC : 0 | BS EN 62561-4 ED1 - REQUIREMENTS FOR LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR FASTENERS |
| UNI EN 15836-2 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 12/30192217 DC | BS ISO 12856. Plastic railway sleepers (railroad ties) |
| BS EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors. Determination of the resistance to artificial weathering |
| CEI EN 60335-2-109 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES |
| 15/30323520 DC : 0 | BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| PD CEN ISO/TR 18486:2017 | Plastics. Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance |
| ANSI INCITS 322 : 2015 | INFORMATION TECHNOLOGY - CARD DURABILITY TEST METHODS |
| BS ISO 16938-2:2008 | Building construction. Determination of the staining of porous substrates by sealants used in joints Test without compression |
| 09/30196635 DC : 0 | BS EN 60092-510 - ELECTRICAL INSTALLATIONS IN SHIPS - SPECIAL FEATURES - HIGH VOLTAGE SHORE CONNECTION SYSTEMS (HVSC-SYSTEMS) |
| CSA C22.2 No. 62109-1 : 2016 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| 08/30186166 DC : DRAFT JULY 2008 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE 56875:2014 | Kitchen furniture. Specifications, requirements, and test methods. |
| UNI EN 15649-7 : 2010 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| I.S. EN 61914:2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| UNI EN ISO 16474-2 : 2014 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
| BS ISO 5912 : 2003 AMD 15519 | CAMPING TENTS |
| 09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| 09/30179580 DC : 0 | BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| 13/30263186 DC : 0 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| CAN/CSA-C22.2 NO. 60079-30-1:17 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations) |
| CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015 | METALLIC OUTLET BOXES |
| ISO 4665:2016 | Rubber, vulcanized or thermoplastic — Resistance to weathering |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| UNE 199051-1:2012 | Road traffic management equipment. Variable message signs. Part 1: Equipment and functional specification |
| UNE-EN 50467:2012 | Railway applications - Rolling stock - Electrical connectors, requirements and test methods |
| I.S. EN 61969-3:2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011 (EQV)) |
| BS EN 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| EN IEC 60068-2-5:2018 | Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering |
| EN IEC 60099-8:2018 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| I.S. EN 16281:2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 62109-1:2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| I.S. 355:2006 | SPECIFICATION FOR HELMETS FOR HURLING AND CAMOGIE PLAYERS |
| CEI EN 50526-1 : 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 513:1999 | UNPLASTICIZED POLYVINYLCHLORIDE (PVC-U) PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| I.S. EN 50289-4-17:2015 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| CEI EN 61643-11 : 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| ISO 11963:2012 | Plastics Polycarbonate sheets Types, dimensions and characteristics |
| EN 50620:2017 | Electric cables - Charging cables for electric vehicles |
| BS EN 50539-11 : 2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| I.S. EN 62852:2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| I.S. EN 50618:2014 | ELECTRIC CABLES FOR PHOTOVOLTAIC SYSTEMS |
| I.S. EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 15836-2:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| I.S. EN 60794-3-70:2016 | OPTICAL FIBRE CABLES - PART 3-70: OUTDOOR CABLES - FAMILY SPECIFICATION FOR OUTDOOR OPTICAL FIBRE CABLES FOR RAPID/MULTIPLE DEPLOYMENT |
| I.S. EN 50620:2017 | ELECTRIC CABLES - CHARGING CABLES FOR ELECTRIC VEHICLES |
| BS EN 16153 : 2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| IEC 60335-2-40:2018 | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| UNE-EN 15649-7:2010 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
| BS EN 50548 : 2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| UNI ISO 11798 : 2011 | INFORMATION AND DOCUMENTATION - PERMANENCE AND DURABILITY OF WRITING, PRINTING AND COPYING ON PAPER - REQUIREMENTS AND TEST METHODS |
| I.S. EN 50548:2011 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| ISO 14486:2012 | Laminate floor coverings — Specification |
| IEC 62561-4:2010 | Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners |
| UNE-EN 60099-4:2016 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| SAE J2527_201709 | Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Xenon-Arc Apparatus |
| 15/30324370 DC : 0 | BS EN 3-8 - PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| IEC PAS 60092-510:2009 | Electrical installations in ships - Part 510: Special features - High-voltage shore connection systems |
| UNE-EN 15534-5:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| NF ISO 10966 : 2011 | SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13655:2018 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| ASTM D 5592 : 1994 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| EN 15534-6:2015+A1:2017 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements |
| IEC TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| I.S. EN ISO 11963:2012 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| EN 60950-22:2017 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| CSA C22.2 No. 62368-1 : 2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DIN EN 13341:2011-04 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods (includes Amendment A1:2011) |
| DIN EN 12574-2:2015-08 (Draft) | STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN 13484:2012-05 | Helmets for users of luges |
| DIN EN 12492:2012-04 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 1078:2014-04 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| UNE-EN 12200-1:2017 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| BS EN 12574-2:2017 | Stationary waste containers Performance requirements and test methods |
| BS EN ISO 12402-7 : 2007 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| BS EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| BS EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry. Guards for power take-off (PTO) drive-shafts. Strength and wear tests and acceptance criteria |
| UNE-EN 671-2:2013 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| UNE-EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| BS EN 14323:2017 | Wood-based panels. Melamine faced boards for interior uses. Test methods |
| IEC 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| ISO 12402-7:2006 | Personal flotation devices Part 7: Materials and components Safety requirements and test methods |
| BS IEC 62852 : 2014 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| UNE-ISO 4141-1:2016 | Road vehicles. Multi-core connecting cables. Part 1: Test methods and requirements for basic performance sheathed cables |
| BS EN 13484:2012 | Helmets for users of luges |
| DIN EN 15200:2007-08 | Sanitary appliances - Multifunction shower cabinets |
| BS EN 14628:2005 | Ductile iron pipes, fittings and accessories. External polythene coating for pipes. Requirements and test methods |
| BS EN 966 : 2012 | HELMETS FOR AIRBORNE SPORTS |
| BS EN ISO 9142:2003 | Adhesives. Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN 12492:2012 | Mountaineering equipment. Helmets for mountaineers. Safety requirements and test methods |
| BS EN ISO 11403-3:2014 | Plastics. Acquisition and presentation of comparable multipoint data Environmental influences on properties |
| BS EN 1384:2017 | Helmets for equestrian activities |
| I.S. EN 10223-7:2012 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| EN 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| IEC 60335-2-40:2018 RLV | Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers |
| EN 1078:2012+A1:2012 | Helmets for pedal cyclists and for users of skateboards and roller skates |
| EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals — Blow moulded or rotationally moulded polyethylene tanks — Requirements and test methods |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 10223-7:2012 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| EN ISO 5674:2009 | Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) |
| EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 12676-2:2000 | Anti-glare systems for roads - Part 2: Test methods |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| CEN/TR 581-4:2005 | Outdoor furniture - Seating and tables for camping, domestic and contract use - Part 4: Requirements and test methods for durability under the influence of climatic conditions |
| EN 50164-4:2008 | Lightning Protection Components (LPC) - Part 4: Requirements for conductor fasteners |
| DIN ISO 10966:2012-02 | SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION (ISO 10966:2011) |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 12574-2:2017 | Stationary waste containers - Part 2: Performance requirements and test methods |
| EN 50539-11 : 2013 AMD 1 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| EN 12899-1:2007 | Fixed, vertical road traffic signs - Part 1: Fixed signs |
| EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| OVE/ONORM EN 61439-1 : 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| EN 60068-2-5:2011 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 1013:2012+A1:2014 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 13341:2005+A1:2011 | Static thermoplastic tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded and rotationally moulded polyethylene tanks and rotationally moulded tanks made of anionically polymerized polyamide 6 - Requirements and test methods |
| EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| EN 15534-5:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 5: Specifications for cladding profiles and tiles |
| EN 15534-4:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 4: Specifications for decking profiles and tiles |
| EN 13071 : 2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| EN 13245-3:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| EN 60950-1:2006/A2:2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED) |
| ENV 12224 : 1996 | GEOTEXTILES AND GEOTEXTILE RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING |
| EN 50289-4-17:2015 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| NBR 15820 : 2010 | BOX FOR ELECTRIC POWER METER - REQUIREMENTS |
| I.S. EN 13200-4:2006 | SPECTATOR FACILITIES - PART 4: SEATS - PRODUCT CHARACTERISTICS |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| PD IEC/TR 61916:2017 | Electrical accessories. Harmonization of general rules |
| PREN 1871 : DRAFT 2012 | ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| UNI EN 15534-5 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES |
| 09/30200407 DC : 0 | BS EN 50526-1 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| 14/30299825 DC : 0 | BS EN 50289-4-17 - COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| BS EN 4708-001:2014 | Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification Technical specification |
| DIN EN 1866:2006-03 | MOBILE FIRE EXTINGUISHERS |
| DIN EN 15649-7:2010-04 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| 07/30166797 DC : 0 | |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| DD ISO/TS 13434:2008 | Geosynthetics. Guidelines for the assessment of durability |
| 15/30317639 DC : 0 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
| PD ISO/TS 19022:2016 | Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance |
| I.S. EN 15651-2:2017 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| UNE-EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| 95/102726 DC : DRAFT MARCH 1995 | PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS |
| 12/30258456 DC : 0 | BS EN 60950-1:2006/FPRAE:2011 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN IEC 60794-1-22:2018 | Optical fibre cables Generic specification. Basic optical cable test procedures. Environmental test methods |
| 15/30322585 DC : 0 | BS EN ISO 12402-7 - PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| 14/30313367 DC : 0 | BS ISO 19862 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DURABILITY TO EXTENSION COMPRESSION CYCLING UNDER ACCELERATED WEATHERING |
| BS IEC 60092-306:2009 | Electrical installations in ships Equipment. Luminaires and lighting accessories |
| CEI EN 62217 : 2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| BS EN 61914:2016 | Cable cleats for electrical installations |
| BS ISO 16938-1:2008 | Building construction. Determination of the staining of porous substrates by sealants used in joints Test with compression |
| ISO 14572:2011 | Road vehicles — Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables — Test methods and requirements for basic- and high-performance cables |
| 15/30326957 DC : 0 | BS EN 62561-4 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 11/30215685 DC : 0 | BS EN ISO 15110 - PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| BS PD ISO/TR 18486 : 2016 | PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE |
| 14/30243468 DC : 0 | BS ISO 3917 - ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING |
| 10/30205800 DC : 0 | BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES |
| 17/30342148 DC : 0 | BS ISO 19821 - DETERMINATION OF SPAN RATING FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
| 17/30349217 DC : 0 | BS EN ISO 21970-2 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| UNI EN 15534-4 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES |
| BS EN 1866-2:2014 | Mobile fire extinguishers Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| 09/30194273 DC : 0 | BS EN 62208 - EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| BS ISO 14572:2011 | Road vehicles. Round, sheathed, 60 V and 600 V screened and unscreened single- or multi-core cables. Test methods and requirements for basic- and high-performance cables |
| 09/30209028 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| PREN 14187-8 : DRAFT 2014 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| 15/30316094 DC : DRAFT FEB 2015 | BS EN 14836 - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| 15/30280950 DC : 0 | BS EN ISO 8936 - AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 105-B10:2012-01 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| 03/301511 DC : DRAFT JAN 2003 | ISO 4141-1 - ROAD VEHICLES - MULTICORE CONNECTING CABLES - PART 1: TEST METHODS AND REQUIREMENTS FOR BASIC PERFORMANCE SHEATHED CABLES |
| ISO 11617:2014 | Buildings and civil engineering works Sealants Determination of changes in cohesion and appearance of elastic weatherproofing sealants after exposure of statically cured specimens to artificial weathering and mechanical cycling |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| BS EN 50526-2:2014 | Railway applications. Fixed installations. D.C. surge arresters and voltage limiting devices Voltage limiting devices |
| 16/30317340 DC : 0 | BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| BS ISO 2135:2017 | Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| BS EN 15534-5:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Specifications for cladding profiles and tiles |
| 11/30246708 DC : 0 | BS EN 62561-6 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| BS EN 62561-4:2017 | Lightning protection system components (LPSC) Requirements for conductor fasteners |
| UNI EN 16434 : 2014 | INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES |
| BS ISO 19712-2 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 10/30212519 DC : 0 | BS ISO 10966 - SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS - SPECIFICATION |
| 07/30127278 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| 14/30310323 DC : 0 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| 02/565097 DC : DRAFT DEC 2002 | BS ISO 17398 - SAFETY COLOURS AND SAFETY SIGNS - DURABILITY OF SAFETY SIGNS |
| 10/30233680 DC : 0 | BS EN 13575 - STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| 07/30154920 DC : 0 | BS ISO 7165 - FIRE FIGHTING - PORTABLE FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION |
| 06/30147348 DC : DRAFT MAR 2006 | ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| CEI EN 50467 : 2013 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| 09/30167595 DC : 0 | BS EN 60099-8 ED.1 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| 08/30181781 DC : DRAFT JULY 2008 | BS EN 15836-2 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 2: REINFORCED MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 1,5 MM |
| 08/19979365 DC : DRAFT FEB 2008 | BS ISO 15928-3 - HOUSES - DESCRIPTION OF PERFORMANCE - PART 3: STRUCTURAL DURABILITY |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| PREN 50467 : DRAFT 2009 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| BS ISO 9370:2017 | Plastics. Instrumental determination of radiant exposure in weathering tests. General guidance and basic test method |
| 08/30181778 DC : DRAFT JULY 2008 | BS EN 15836-1 - PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNE-EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 2: Determination of properties |
| I.S. EN 60068-2-5:2011 | ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING |
| ISO/TS 19022:2016 | Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance |
| ISO/IEC 11801-1:2017 | Information technology — Generic cabling for customer premises — Part 1: General requirements |
| DIN EN 16434:2014-06 | INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES |
| DIN EN 16434 E : 2014 | INTERNAL BLINDS - PROTECTION FROM STRANGULATION HAZARDS - REQUIREMENTS AND TEST METHODS FOR SAFETY DEVICES |
| EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| CSA C22.2 No. 18.1 : 2013 | METALLIC OUTLET BOXES |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| CSA C22.2 No. 61730-1 : 2011 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods |
| UNE-IEC 60092-306:2010 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| BIS IS 13252-22 : 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| CEI EN 62368-1 : 2016 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| UNE-EN ISO 105-B10:2012 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| I.S. EN 15534-5:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 5: SPECIFICATIONS FOR CLADDING PROFILES AND TILES |
| CEI EN 60079-30-1 : 2008 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| CEI EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| I.S. EN IEC 60794-1-22:2018 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| ISO 15372:2000 | Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers |
| I.S. EN 50539-11:2013 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| PREN 131-2 : DRAFT 2009 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| UNI EN 16281 : 2013 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| OVE/ONORM EN 62852 : 2015 | CONNECTORS FOR DC-APPLICATION IN PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS (IEC 62852:2014) |
| I.S. EN ISO 16474-2:2013 | PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 16474-2:2013) |
| UNE 27700:2013 | Systems and equipments to improve the stability and floatability reserve of vessels and floating structrures by inflatable means, in case of water ingress or excessive listing. Requirements and test methods for the flotation modules. |
| ISO 25649-7:2017 | Floating leisure articles for use on and in the water — Part 7: Additional specific safety requirements and test methods for Class E devices |
| I.S. EN ISO 19712-2:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
| UNE-ISO 1268-11:2012 | Fibre-reinforced plastics. Methods of producing test plates. Part 11: Injection moulding of BMC and other long-fibre moulding compounds. Small plates |
| CEI EN 60068-2-5 : 2012 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING |
| ISO 19862:2015 | Buildings and civil engineering works Sealants Durability to extension compression cycling under accelerated weathering |
| IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| I.S. EN 124-6:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 6: GULLY TOPS AND MANHOLE TOPS MADE OF POLYPROPYLENE (PP), POLYETHYLENE (PE) OR UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| ISO/TR 18486:2016 | Plastics Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance |
| I.S. EN 17033:2018 | PLASTICS - BIODEGRADABLE MULCH FILMS FOR USE IN AGRICULTURE AND HORTICULTURE - REQUIREMENTS AND TEST METHODS |
| UNI EN 15752-1 : 2015 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| DIN EN 13071-1:2008-10 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| PREN 14932 : DRAFT 2016 | PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING SILAGE BALES - REQUIREMENTS AND TEST METHODS, CONDITIONS OF USE AND REMOVAL |
| CEN ISO/TR 18486:2017 | Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2016) |
| CEI EN 60099-4 : 2015 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| CSA C22.2 No. 130 : 2016 | REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
| IEC TS 62561-8:2018 | Lightning protection system components (LPSC) - Part 8: Requirements for components for isolated LPS |
| UNE-EN 60068-2-5:2011 | Environmental testing - Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing |
| ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| UNE-EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| UNI EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| NF EN 60335-2-109 : 2011 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES |
| NF EN 60950-1 : 2006 AMD 2 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 14836:2005 | Synthetic surfaces for outdoor sports areas. Exposure to artificial weathering |
| I.S. EN 60099-4:2014 | SURGE ARRESTERS - PART 4: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR A.C. SYSTEMS |
| I.S. EN 62275:2015 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| IEC 62930:2017 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
| ISO 1268-11:2005 | Fibre-reinforced plastics — Methods of producing test plates — Part 11: Injection moulding of BMC and other long-fibre moulding compounds — Small plates |
| IEC 61950:2007 | Cable management systems - Specifications for conduit fittings and accessories for cable installations for extra heavy duty electrical steel conduit |
| DIN EN 12899-1:2008-02 | FIXED VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| DIN EN 13200-4:2006-12 | Spectator facilities - Part 4: Seats - Product characteristics |
| DIN EN 1359:2007-06 | GAS METERS - DIAPHRAGM GAS METERS |
| DIN EN 13206:2015-09 (Draft) | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| UNI EN 3-8 : 2007 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| DIN EN 14836:2015-03 (Draft) | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| DIN EN ISO 5674:2009-06 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| DIN EN 14323:2004-06 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| BS EN 840-5:2012 | Mobile waste and recycling containers Performance requirements and test methods |
| ISO 7823-3:2007 | Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
| ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| ISO 7491:2000 | Dental materials — Determination of colour stability |
| BS EN 1385:2012 | Helmets for canoeing and white water sports |
| BS EN ISO 7823-3:2007 | Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
| BS EN 3-8:2006 | Portable fire extinguishers Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 438-2 : 2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS EN 14389-1:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics |
| 14/30311240 DC : 0 | BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 11997-2:2013 | Paints and varnishes. Determination of resistance to cyclic corrosion conditions Wet (salt fog)/dry/humidity/UV light |
| ISO 8936:2017 | Awnings for leisure accommodation vehicles — Requirements and test methods |
| EN 61969-3:2012 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 14389-2:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 671-2:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| DIN EN 1866:1998-11 | MOBILE FIRE EXTINGUISHERS |
| I.S. EN 263:2008 | SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 1384:2017 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN 12574-2:2017 | STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 14323:2017 | WOOD-BASED PANELS - MELAMINE FACED BOARDS FOR INTERIOR USES - TEST METHODS |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN 12574-2:2017-05 | STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| I.S. EN 131-2:2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| I.S. EN 13245-1:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| I.S. EN 14628:2005 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 11431:2003-01 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - DETERMINATION OF ADHESION/COHESION PROPERTIES OF SEALANTS AFTER EXPOSURE TO HEAT, WATER AND ARTIFICIAL LIGHT THROUGH GLASS |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 607:2004 | EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
| I.S. EN 1078:2012 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| EN ISO 11963:2012 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| I.S. EN 12492:2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 11997-2:2013 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| I.S. EN 397:2012 | INDUSTRIAL SAFETY HELMETS |
| I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 1359:2017 | GAS METERS - DIAPHRAGM GAS METERS |
| I.S. EN 12200-1:2016 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| I.S. EN 966:2012 | HELMETS FOR AIRBORNE SPORTS |
| I.S. EN ISO 11403-3:2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| DIN EN ISO 11963:2013-03 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| I.S. EN 1385:2012 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| I.S. EN 13484:2012 | HELMETS FOR USERS OF LUGES |
| I.S. EN 14125:2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| I.S. EN 12899-1:2007 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| I.S. EN ISO 5674:2009 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE-OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| I.S. EN ISO 12017:1997 | PLASTICS - POLY(METHYL METHACRYLATE) DOUBLE- AND TRIPLE-SKIN SHEETS - TEST METHODS |
| I.S. EN 671-1:2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| IEC 61914:2015 | Cable cleats for electrical installations |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 13341:2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 12402-7 : 2011 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| I.S. EN 13575:2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 812:2012 | INDUSTRIAL BUMP CAPS |
| I.S. EN 14389-1:2015 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| I.S. EN ISO 7823-3:2007 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
| VDI 3822 Blatt 2.1.8:2012-01 | Failure analysis - Defects of thermoplastic products made of plastics caused by weather-induced stress |
| BIS IS 13252-1 : 2010 AMD 1 2013 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| VDI 3958 Blatt 10:2012-01 | Environmental simulation - Exposure of materials to gaseous air pollutants |
| VDI 3958 Blatt 11:2009-05 | Environmental simulation - Exposure of polymers to air pollutants in combination with weathering |
| VDI 3958 Blatt 12:2004-02 | Environmental simulation - Effects of acidic precipitation on polymers - Test methods |
| BS 2782-5.540D(1999) : 1999 AMD 13148 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE |
| VDI 4489 Blatt 1:2015-06 (Draft) | Labelling of pallets with Auto-ID elements - Returnable wooden pallets of Euro measure (800 mm x 1200 mm) |
| ASTM D 2565 : 2016 : REDLINE | Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications |
| DIN EN 15836-1:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| PREN 62561-6 : DRAFT 2011 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| UNI CEN/TS 16599 : 2014 | PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS |
| 17/30356577 DC : 0 | BS EN 60099-8 - SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| 96/709571 DC : DRAFT JUL 1996 | PREN 10286 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL THREE LAYER EXTRUDED POLYPROPYLENE BASED COATINGS |
| BS EN 16281:2013 | Child protective products. Consumer fitted child resistant locking devices for windows and balcony doors. Safety requirements and test methods |
| BS EN ISO 19712-3:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
| 11/30231856 DC : 0 | BS EN 14125 - THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNE-EN 50618:2015 | Electric cables for photovoltaic systems |
| BS ISO 15686-2:2012 | Buildings and constructed assets. Service life planning Service life prediction procedures |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| BS EN 62790:2015 | Junction boxes for photovoltaic modules. Safety requirements and tests |
| 09/30214460 DC : 0 | BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| BS ISO 19862:2015 | Buildings and civil engineering works. Sealants. Durability to extension compression cycling under accelerated weathering |
| BS ISO 4141-1:2005 | Road vehicles. Multi-core connecting cables Test methods and requirements for basic performance sheathed cables |
| ISO 3934:2002 | Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods |
| BS EN 60794-3-70:2016 | Optical fibre cables Outdoor cables. Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| PREN 12200-1 : DRAFT 2014 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DD ENV 12224:1997 | Geotextiles and geotextile-related products. Determination of the resistance to weathering |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| BS EN 50618:2014 | Electric cables for photovoltaic systems (BT(DE/NOT)258) |
| BS EN 50289-4-17:2015 | Communication cables. Specifications for test methods Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| DIN EN 15651-2:2016-10 (Draft) | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| 14/30281866 DC : 0 | BS ISO 18178 - GLASS IN BUILDING - LAMINATED SOLAR PV GLASS |
| UNE-EN 15752-1:2015 | Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements |
| DIN ISO 5912 E : 2004 | CAMPING TENTS |
| BS EN 16434:2014 | Internal blinds. Protection from strangulation hazards. Requirements and test methods for safety devices |
| 15/30297966 DC : 0 | BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| BS EN 50164-4:2008 | Lightning protection components (LPC) Requirements for conductor fasteners |
| BS ISO 10966:2011 | Sports and recreational equipment. Fabrics for awnings. Specification |
| BS EN 60099-8:2011 | Surge arresters Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| UNE-EN 61914:2016 | Cable cleats for electrical installations |
| I.S. EN 60335-2-109:2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES |
| ESPECIFICACION UNE 0059:2017 | Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines |
| UNE-EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 12/30258334 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTIC SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 05/30103531 DC : DRAFT AUG 2005 | |
| 10/30196613 DC : 0 | BS ISO 14572 - ROAD VEHICLES - ROUND, SHEATHED, 60 V AND 600 V SCREENED AND UNSCREENED SINGLE- OR MULTI-CORE CABLES - TEST METHODS AND REQUIREMENTS FOR BASIC AND HIGH-PERFORMANCE CABLES |
| 12/30256082 DC : 0 | BS EN 12899-6 - FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 6: PERFORMANCE OF RETROREFLECTIVE SIGN FACE MATERIAL |
| NF EN 50164-4 : 2008 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS |
| BS ISO 18937:2014 | Imaging materials. Photographic reflection prints. Methods for measuring indoor light stability |
| 07/30137506 DC : 0 | BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
| 08/30194094 DC : 0 | BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| DIN ISO 3917:2003-07 | ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING (ISO 3917:2016) |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| DD CLC/TS 50467:2008 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| 03/304727 DC : DRAFT OCT 2003 | ISO/DIS 8029 - PLASTICS HOSE - GENERAL PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE REINFORCED - SPECIFICATION |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| DIN ISO 16938-2:2012-12 | BUILDING CONSTRUCTION - DETERMINATION OF THE STAINING OF POROUS SUBSTRATES BY SEALANTS USED IN JOINTS - PART 2: TEST WITHOUT COMPRESSION (ISO 16938-2:2008) |
| 17/30335121 DC : 0 | BS EN 13655 - PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| 06/30133250 DC : 0 | BS EN 13071-1 - STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials |
| BS EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria |
| 02/121747 DC : DRAFT APR 2002 | PREN 438-2 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| BS ISO 1268-11:2005 | Fibre-reinforced plastics. Methods of producing test plates Injection moulding of BMC and other long-fibre moulding compounds. Small plates |
| BS EN 15534-4:2014 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) Specifications for decking profiles and tiles |
| 03/116049 DC : DRAFT NOV 2003 | BS EN 12574-2 - STATIONARY WASTE CONTAINERS - PART 2: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| 04/30113880 DC : DRAFT MAY 2004 | BS EN 14932 - PLASTICS - STRETCH THERMOPLASTIC FILMS FOR WRAPPING BALES - REQUIREMENTS AND TEST METHODS |
| BS EN 50298:1999 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| 06/30156625 DC : DRAFT OCT 2006 | BS EN ISO 105-B10 - TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON - ARC RADIATION |
| BS ISO 3917:2016 | Road vehicles. Safety glazing materials. Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods; German version EN 14963:2006 |
| 10/30215313 DC : 0 | BS ISO 18930 - IMAGING MATERIALS - PICTORIAL COLOUR REFLECTION PRINTS - METHODS FOR EVALUATING IMAGE STABILITY UNDER OUTDOOR CONDITIONS |
| 11/30238648 DC : DRAFT FEB 2011 | BS EN 16240 - LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 15/30313931 DC : 0 | BS ISO 9022-9 - OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 9: SOLAR RADIATION AND WEATHERING |
| 08/30183606 DC : DRAFT JUNE 2008 | BS EN 60335-2-109 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-109: PARTICULAR REQUIREMENTS FOR UV RADIATION WATER TREATMENT APPLIANCES |
| PREN 3-8 : DRAFT 2015 | PORTABLE FIRE EXTINGUISHERS - PART 8: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 3-7 |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| 14/30311481 DC : 0 | BS EN 14187-8 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| DIN EN 16153:2015-05 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| IEC 62561-6:2018 | Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) |
| CSA C22.2 No. 18.3 : 2012 | CONDUIT, TUBING, AND CABLE FITTINGS |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| UNE-EN 62208:2012 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| UNE-EN 60335-2-109:2011 | Household and similar electrical appliances - Safety -- Part 2-109: Particular requirements for UV radiation water treatment appliances |
| UL 60950-22:2ED 2017-03-31 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
| I.S. EN ISO 19712-3:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
| I.S. EN 61643-11:2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
| PREN 50289-4-17 : DRAFT 2014 | COMMUNICATION CABLES - SPECIFICATIONS FOR TEST METHODS - PART 4-17: TEST METHODS FOR UV RESISTANCE EVALUATION OF THE SHEATH OF ELECTRICAL AND OPTICAL FIBRE CABLE |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| CEI EN 62275 : 2016 | CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| BS EN 1013 : 2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 29664:2017 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| I.S. EN 50164-4:2008 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 4: REQUIREMENTS FOR CONDUCTOR FASTENERS |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| EN 62561-4:2017 | Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners |
| NF EN 61914 : 2016 | CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| ISO 18937:2014 | Imaging materials Photographic reflection prints Methods for measuring indoor light stability |
| UNE-EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| UNE-EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| IEC 60099-8:2017 | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| S.R. CEN ISO/TR 18486:2017 | PLASTICS - PARAMETERS COMPARING THE SPECTRAL IRRADIANCE OF A LABORATORY LIGHT SOURCE FOR WEATHERING APPLICATIONS TO A REFERENCE SOLAR SPECTRAL IRRADIANCE (ISO/TR 18486:2016) |
| UNI EN ISO 21809-1 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| I.S. EN 124-5:2015 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| PREN 50526-1 : DRAFT 2009 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN 13245-3:2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| I.S. EN ISO 25649-7:2017 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES (ISO 25469-7:2017) |
| PREN 13655 : DRAFT 2016 | PLASTICS - THERMOPLASTIC MULCH FILMS RECOVERABLE AFTER USE, FOR USE IN AGRICULTURE AND HORTICULTURE |
| I.S. EN 15836-1:2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNE-EN ISO 15110:2018 | Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) |
| EN IEC 62688:2018 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
| I.S. EN 60950-1:2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005 (MOD)) |
| EN 17098-1:2018 | Plastics - Barrier films for agricultural and horticultural soil disinfection by fumigation - Part 1: Specifications for barrier films |
| UNI EN 4708-001 : 2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| EN 13207:2018 | Plastics - Thermoplastic silage films and tubes for use in agriculture |
| BS EN 60079-30-1:2017 | Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
| BS EN 13071-1:2008 | Stationary waste containers up to 5000 l, top lifted and bottom emptied General requirements |
| PREN 1384 : DRAFT 2014 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| UNI EN 13245-3 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES |
| IEC 60800:2009 | Heating cables with a rated voltage of 300/500 V for comfort heating and prevention of ice formation |
| UNI ISO 3865 : 2010 | RUBBER, VULCANIZED OR THERMOPLASTIC - METHODS OF TEST FOR STAINING IN CONTACT WITH ORGANIC MATERIAL |
| EN 13655:2018 | Plastics - Thermoplastic mulch films recoverable after use, for use in agriculture and horticulture |
| BS EN 62275:2015 | Cable management systems. Cable ties for electrical installations |
| ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| EN 14932:2018 | Plastics - Thermoplastic stretch films for wrapping silage bales |
| EN 17033:2018 | Plastics - Biodegradable mulch films for use in agriculture and horticulture - Requirements and test methods |
| EN 62275:2015 | Cable management systems - Cable ties for electrical installations |
| I.S. EN 13207:2018 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| IEC 62368-1:2014 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| I.S. EN 12068:1999 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| S.R. CLC/TS 50467:2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| ISO 15082:2016 | Road vehicles Tests for rigid plastic safety glazing materials |
| IEC 62724:2013 | Railway applications - Fixed installations - Electric traction - Insulating synthetic rope assemblies for support of overhead contact lines |
| DIN EN 1385:2012-04 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| DIN EN 1384:2015-02 (Draft) | HELMETS FOR EQUESTRIAN ACTIVITIES |
| DIN EN 14187-8:2003-09 | COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 8: DETERMINATION OF THE ARTIFICIAL WEATHERING BY UV-IRRADIATION |
| BS EN 13206:2017 | Plastics. Thermoplastic covering films for use in agriculture and horticulture |
| DIN EN ISO 11997-2:2013-12 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT (ISO 11997-2:2013) |
| DIN EN 812:2012-04 | INDUSTRIAL BUMP CAPS |
| DIN EN 3-8:2015-07 (Draft) | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| DIN EN ISO 11403-3:2014-09 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| DIN EN 15132:2006-12 | Container shells for mobile waste containers with a capacity up to 1700 l - Performance requirements and test methods |
| BS EN 1078 : 2012 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| DIN EN 13206:2017-05 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| BS EN 397 : 2012 | INDUSTRIAL SAFETY HELMETS |
| IEC 61969-3:2011 | Mechanical structures for electronic equipment - Outdoor enclosures - Part 3: Environmental requirements, tests and safety aspects |
| IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| BS EN 12676-2:2000 | Anti-glare systems for roads Test methods |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| BS EN 4057-305:2005 | Aerospace series. Cable ties for harnesses. Test methods Colour fastness |
| UNE-EN 62109-1:2011 | Safety of power converters for use in photovoltaic power systems -- Part 1: General requirements |
| BS EN 14187-8:2017 | Cold applied joint sealants. Test methods Determination of the artificial weathering by UV-irradiation |
| BS EN 1866:2005 | Mobile fire extinguishers |
| IEC 62217:2012 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| UNE-EN 671-1:2013 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| I.S. EN ISO 12402-7:2006 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 294-3:2003 | PLASTICS - INJECTION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS - SMALL PLATES |
| DIN EN 1384:2012-05 | HELMETS FOR EQUESTRIAN ACTIVITIES |
| CSA C22.2 No. 60950-1 :2007 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 1 : 2011 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| UNE-EN 62275:2016 | Cable management systems - Cable ties for electrical installations |
| UNE-EN ISO 11963:2013 | Plastics - Polycarbonate sheets - Types, dimensions and characteristics (ISO 11963:2012) |
| C22.2 NO. 18.5-13 (R2018) | Positioning devices (Bi-national standard, with UL 1565) |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R201200 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 60950-1:2007 | Information technology equipment - Safety - Part 1: General requirements |
| UL 514A:11ED 2013-02-01 | Metallic Outlet Boxes |
| CSA C22.2 No. 60950-1 : 2007 : R2012 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 60335-2-40 : 2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
| CSA C22.2 No. 60950-1 : 2007 : INC : UPD 1 : 2011 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| CSA C22.2 No. 18.5:2013 | POSITIONING DEVICES |
| EN ISO 294-3:2003 | Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002) |
| CSA C22.2 No. 60950-1 : 2007 : INC : AMD 2 : 2014 : R2016 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| UNI EN 15187 : 2007 | FURNITURE - ASSESSMENT OF THE EFFECT OF LIGHT EXPOSURE |
| EN 50298:1998 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| UNI EN 13484 : 2012 | HELMETS FOR USERS OF LUGES |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 13245-1 : 2010 | PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNI EN 10245-3 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| UNI EN 13341 : 2011 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNI EN 671-1 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 1: HOSE REELS WITH SEMI-RIGID HOSE |
| UNI EN 397 : 2013 | INDUSTRIAL SAFETY HELMETS |
| UNI EN ISO 5674 : 2009 | TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY - GUARDS FOR POWER TAKE- OFF (PTO) DRIVE-SHAFTS - STRENGTH AND WEAR TESTS AND ACCEPTANCE CRITERIA |
| UNI EN ISO 11997-2 : 2014 | PAINTS AND VARNISHES - DETERMINATION OF RESISTANCE TO CYCLIC CORROSION CONDITIONS - PART 2: WET (SALT FOG)/DRY/HUMIDITY/UV LIGHT |
| UNI EN 10223-7 : 2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| UNI EN ISO 11963 : 2013 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| UNI EN 10245-2 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 966 : 2013 | HELMETS FOR AIRBORNE SPORTS |
| UNI EN 263 : 2008 | SANITARY APPLIANCES - CROSSLINKED CAST ACRYLIC SHEETS FOR BATHS AND SHOWER TRAYS FOR DOMESTIC PURPOSES |
| UNI EN 13575 : 2012 | STATIC THERMOPLASTIC TANKS FOR THE ABOVE GROUND STORAGE OF CHEMICALS - BLOW MOULDED OR ROTATIONALLY MOULDED POLYETHYLENE TANKS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1385 : 2012 | HELMETS FOR CANOEING AND WHITE WATER SPORTS |
| UNI EN 12492 : 2012 | MOUNTAINEERING EQUIPMENT - HELMETS FOR MOUNTAINEERS - SAFETY REQUIREMENTS AND TEST METHODS |
| UNI EN 14125 : 2013 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| UNI EN 671-2 : 2012 | FIXED FIREFIGHTING SYSTEMS - HOSE SYSTEMS - PART 2: HOSE SYSTEMS WITH LAY-FLAT HOSE |
| EN 607:2004 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN 12899-1 : 2008 | FIXED, VERTICAL ROAD TRAFFIC SIGNS - PART 1: FIXED SIGNS |
| UNI EN 15200 : 2007 | SANITARY APPLIANCES - MULTIFUNCTION SHOWER CABINETS |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN 1078 : 2013 | HELMETS FOR PEDAL CYCLISTS AND FOR USERS OF SKATEBOARDS AND ROLLER SKATES |
| UNI EN 812 : 2012 | INDUSTRIAL BUMP CAPS |
| UNE-EN ISO 16474-2:2014 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) |
| BS EN ISO 19712-2:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
| 13/30288815 DC : 0 | BS EN 61914 - CABLE CLEATS FOR ELECTRICAL INSTALLATIONS |
| BS ISO/IEC/IEEE 80005-1:2012 | Utility connections in port High Voltage Shore Connection (HVSC) Systems. General requirements |
| DIN EN 15836-2:2010-11 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| 16/30328596 DC : 0 | BS ISO 9370 - PLASTICS - INSTRUMENTAL DETERMINATION OF RADIANT EXPOSURE IN WEATHERING TESTS - GENERAL GUIDANCE AND BASIC TEST METHOD |
| DIN EN 13245-3:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| BS ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| EN IEC 60794-1-22:2018 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| I.S. EN 13071:2002 | SELECTIVE WASTE COLLECTION CONTAINERS - ABOVE-GROUND MECHANICALLY-LIFTED CONTAINERS WITH CAPACITIES FROM 80 L TO 5000 L FOR SELECTIVE COLLECTION OF WASTE |
| 02/102266 DC : DRAFT MAR 2002 | PREN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| UNI EN 15836-1 : 2010 | PLASTICS - PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) MEMBRANES FOR INGROUND SWIMMING POOLS - PART 1: HOMOGENOUS MEMBRANES OF NOMINAL THICKNESS EQUAL TO OR GREATER THAN 0,75 MM |
| UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| BS EN 124-5:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of composite materials |
| 02/207432 DC : DRAFT JUN 2002 | IEC 62217. ED.1.0 - CREATION OF A COMMON CLAUSE STANDARD FOR COMPOSITE INSULATORS |
| 12/30239867 DC : 0 | BS EN 62368-1 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| UNI EN ISO 105-B10 : 2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| BS EN 15836-1:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| ISO/PAS 11154:2006 | Road vehicles — Roof load carriers |
| 11/30236286 DC : 0 | BS EN ISO 11963 - PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| 06/30146756 DC : DRAFT FEB 2006 | |
| I.S. EN ISO 21809-1:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 1: POLYOLEFIN COATINGS (3-LAYER PE AND 3-LAYER PP) |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 13/30256722 DC : 0 | BS ISO 11617 - BUILDINGS AND CIVIL ENGINEERING WORKS - SEALANTS - DETERMINATION OF CHANGES IN ADHESION, COHESION AND APPEARANCE OF ELASTIC WEATHERPROOFING SEALANTS AFTER EXPOSURE OF STATICALLY CURED SPECIMENS TO ARTIFICIAL WEATHERING AND MECHANICAL CYCLING |
| 03/105231 DC : DRAFT MAR 2003 | ISO 10966 - SPORTS AND RECREATIONAL EQUIPMENT - FABRICS FOR AWNINGS AND CAMPING TENTS - SPECIFICATION |
| 14/30267384 DC : 0 | BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS |
| 08/30180841 DC : DRAFT JUNE 2008 | BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| 02/206403 DC : DRAFT MAY 2002 | IEC 62231. ED.1.0 - COMPOSITE STATION POST INSULATORS FOR SUBSTATIONS WITH A.C. VOLTAGES GREATER THAN 1000 V UPTO 245 KV - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| 04/30125747 DC : DRAFT NOV 2004 | IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| PREN 14125 : DRAFT 2011 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 13/30294291 DC : 0 | BS EN 62561-8 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 8: REQUIREMENTS FOR COMPONENTS FOR ISOLATED LPS |
| BS ISO 15398:2012 | Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas |
| BS EN 13245-3:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications Designation of PVC-UE profiles |
| BS EN 50620:2017 | Electric cables. Charging cables for electric vehicles (BT(DE/NOT)259) |
| BS EN 60335-2-109:2010 | Household and similar electrical appliances. Safety Particular requirements for UV radiation water treatment appliances |
| 08/30189619 DC : 0 | BS EN 10223-7 - STEEL WIRE AND WIRE PRODUCTS FOR FENCES - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| 14/30253068 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| BS ISO 29664 : 2010 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| BS ISO 15372:2000 | Ships and marine technology. Inflatable rescue boats. Coated fabrics for inflatable chambers |
| PD IEC/PAS 80005-3:2014 | Utility connections in port Low Voltage Shore Connection (LVSC) Systems. General requirements |
| DIN EN ISO 16474-2:2014-03 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) |
| UNE-EN 10310:2011 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| BS ISO 4665:2016 | Rubber, vulcanized or thermoplastic. Resistance to weathering |
| 15/30331165 DC : 0 | BS EN 60068-2-5 - ENVIRONMENTAL TESTING - PART 2-5: TESTS - TEST SA: SIMULATED SOLAR RADIATION AT GROUND LEVEL AND GUIDANCE FOR SOLAR RADIATION TESTING |
| UNI CEN/TS 16359 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF KNOT STAINING RESISTANCE OF WOOD COATINGS |
| BS ISO 9022-9:2016 | Optics and photonics. Environmental test methods Solar radiation and weathering |
| ISO 10966:2011 | Sports and recreational equipment Fabrics for awnings Specification |
| BS EN 15649-7:2009 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
| BS EN 13329 : 2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| BS EN 62561-6:2011 | Lightning protection system components (LPSC) Requirements for lightning strike counters (LSC) |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| DIN EN 14836:2006-03 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| PD CEN/TS 16359:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of knot staining resistance of wood coatings |
| DIN EN 16281:2013-04 | CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED CHILD RESISTANT LOCKING DEVICES FOR WINDOWS AND BALCONY DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| 13/30289253 DC : 0 | BS EN 13329 - LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| CEI EN 61969-3 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS |
| 16/30333706 DC : 0 | BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| BS EN ISO 16474-2:2013 | Paints and varnishes. Methods of exposure to laboratory light sources Xenon-arc lamps |
| BS EN 60099-9:2014 | Surge arresters Metal-oxide surge arresters without gaps for HVDC converter stations |
| 07/30172345 DC : 0 | BS EN 15724 - THERMOPLASTICS STATIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - SECONDARY CONTAINMENTS USED WITH TANKS COMPLYING WITH EN 13341 - REQUIREMENTS AND TEST METHODS |
| 03/119348 DC : 0 | PREN 1013-1 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETING FOR INTERNAL AND EXTERNAL ROOFING, WALL CLADDING AND CEILING FINISHES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| 16/30325971 DC : 0 | BS ISO/IEC 11801-1 - INFORMATION TECHNOLOGY - GENERIC CABLING FOR CUSTOMER PREMISES - PART 1: GENERAL REQUIREMENTS |
| 12/30258453 DC : 0 | BS EN 62368-1 AMD - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| UNE-EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| 12/30235298 DC : DRAFT JAN 2012 | BS EN 50526-2 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| ONORM EN ISO 11963 : 2013 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS (ISO 11963:2012) |
| UNE-EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| 14/30290405 DC : 0 | BS EN 1384 - HELMETS FOR EQUESTRIAN ACTIVITIES |
| BS ISO 17398:2004 | Safety colours and safety signs. Classification, performance and durability of safety signs |
| 14/30310464 DC : 0 | BS EN 61643-31 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 31: REQUIREMENTS AND TEST METHODS FOR SPDS FOR PHOTOVOLTAIC INSTALLATIONS |
| PREN 4057-305 : 200P1 | AEROSPACE SERIES - CABLE TIES FOR HARNESSES - TEST METHODS - PART 305: COLOUR FASTNESS |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 50604-1:2016 | Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods |
| BS EN 60950-22:2017 | Information technology equipment. Safety Equipment to be installed outdoors |
| IEC PAS 80005-3:2014 | Utility connections in port - Part 3: Low Voltage Shore Connection (LVSC) Systems - General requirements |
| IEC 62893-2:2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 2: Test methods |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| PREN 15651-2 : DRAFT 2012 | SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| BS ISO 3865:2005 | Rubber, vulcanized or thermoplastic. Methods of test for staining in contact with organic material |
| PREN 13207 : DRAFT 2016 | PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| DIN EN 124-5:2015-09 | GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 5: GULLY TOPS AND MANHOLE TOPS MADE OF COMPOSITE MATERIALS |
| C22.2 NO. 18.1-13 (R2018) | Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1) |
| BS EN ISO 29664:2017 | Plastics. Artificial weathering including acidic deposition |
| ISO 15928-3:2015 | Houses Description of performance Part 3: Structural durability |
| CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| BS EN ISO 21809-1:2011 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyolefin coatings (3-layer PE and 3-layer PP) |
| ISO 9022-9:2016 | Optics and photonics Environmental test methods Part 9: Solar radiation and weathering |
| EN 62561-3:2017 | Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) |
| UNE-EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| I.S. EN 62217:2013 | POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV)) |
| I.S. EN 60099-8:2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| I.S. EN 60950-22:2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| I.S. EN 62368-1:2014 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| DIN EN ISO 29664:2016-09 (Draft) | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| I.S. EN 438-2:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
| BS IEC 62275:2006 | Cable management systems. Cable ties for electrical installations |
| I.S. EN 50526-1:2012 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 1: SURGE ARRESTERS |
| I.S. EN ISO 15110:2017 | PAINTS AND VARNISHES - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 15110:2017) |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| I.S. EN 13329:2016 | LAMINATE FLOOR COVERINGS - ELEMENTS WITH A SURFACE LAYER BASED ON AMINOPLASTIC THERMOSETTING RESINS - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 1013:2012 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| ISO 10640:2011 | Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy |
| I.S. EN 14932:2018 | PLASTICS - THERMOPLASTIC STRETCH FILMS FOR WRAPPING SILAGE BALES |
| BS EN 17098-1:2018 | Plastics. Barrier films for agricultural and horticultural soil disinfection by fumigation Specifications for barrier films |
| EN 62368-1:2014/AC:2017-03 | AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS (IEC 62368-1:2014, MODIFIED) |
| I.S. EN 62561-6:2011 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2011, MODIFIED) |
| EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) |
| UNE-EN 62790:2015 | Junction boxes for photovoltaic modules - Safety requirements and tests |
| UNI EN 13071-1 : 2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| ASTM D 5592 : 1994 : R2010 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| I.S. EN 3-8:2006 | PORTABLE FIRE EXTINGUISHERS - PART 8: ADDITIONAL REQUIREMENTS TO EN 3-7 FOR THE CONSTRUCTION, RESISTANCE TO PRESSURE AND MECHANICAL TESTS FOR EXTINGUISHERS WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR |
| IEC 62848-1:2016 | Railway applications - DC surge arresters and voltage limiting devices - Part 1: Metal-oxide surge arresters without gaps |
| DIN EN 438-2:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES |
| IEC TR 61916:2017 | Electrical accessories - Harmonization of general rules |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN ISO 15110:2017 | Paints and varnishes - Artificial weathering including acidic deposition (ISO 15110:2017) |
| ISO 7628:2010 | Road vehicles Thermoplastics tubing for air braking systems |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
| ISO 7165:2017 | Fire fighting — Portable fire extinguishers — Performance and construction |
| ISO 16938-2:2008 | Building construction Determination of the staining of porous substrates by sealants used in joints Part 2: Test without compression |
| ISO 21809-4:2009 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 4: Polyethylene coatings (2-layer PE) |
| I.S. EN 62208:2011 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| ISO 28278-2:2010 | Glass in building — Glass products for structural sealant glazing — Part 2: Assembly rules |
| I.S. CEN TR 581-4:2006 | OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| S.R. CEN TS 15534-3:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS |
| UNI EN ISO 11403-3 : 2014 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES |
| UNE-EN ISO 21809-1:2019 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2018) |
| I.S. EN 13206:2017 | PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE |
| DIN EN 966:2013-11 | HELMETS FOR AIRBORNE SPORTS |
| DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN 607:2005-02 | Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN 840-5:2013-02 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 7823-2:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN 10223-7:2013-02 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 7: STEEL WIRE WELDED PANELS FOR FENCING |
| DIN EN 397:2013-04 | Industrial safety helmets (includes Amendment A1:2012) |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| IEC 62109-1:2010 | Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| BS EN ISO 12017:1996 | Plastics. Poly(methyl methacrylate) double- and triple-skin sheets. Test methods |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| 04/30123347 DC : DRAFT OCT 2004 | IEC 61439-1 - LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES |
| BS EN 607:2004 | Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing |
| BS EN ISO 10724-2:2001 | Plastics. Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) Small plates |
| IEC 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 11403-3:2014 | Plastics Acquisition and presentation of comparable multipoint data Part 3: Environmental influences on properties |
| IEC 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| EN 62852:2015 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| BS EN ISO 294-3:2003 | Plastics. Injection moulding of test specimens of thermoplastic materials Small plates |
| BS EN 263:2008 | Sanitary appliances. Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| UNE-EN 14187-8:2017 | Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| EN 840-5:2012 | Mobile waste and recycling containers - Part 5: Performance requirements and test methods |
| UNE-EN 840-5:2013 | Mobile waste and recycling containers - Part 5: Performance requirements and test methods |
| BS EN ISO 11431:2002 | Building construction. Jointing products. Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| BS EN 131-2 : 2010 | LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| BS EN 10223-7:2012 | Steel wire and wire products for fencing and netting Steel wire welded panels for fencing |
| UNE-EN ISO 11997-2:2014 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| BS EN 14389-2:2015 | Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| BS EN 671-2:2001 | Fixed fire fighting systems. Hose systems Hose systems with lay-flat hose |
| UNE-EN 50526-2:2014 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| BS EN 62109-1:2010 | Safety of power converters for use in photovoltaic power systems General requirements |
| BS EN 13575:2012 | Static thermoplastic tanks for the above ground storage of chemicals. Blow moulded or rotationally moulded polyethylene tanks. Requirements and test methods |
| UNE-EN 10223-7:2013 | Steel wire and wire products for fencing and netting - Part 7: Steel wire welded panels for fencing |
| UNE-EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| ISO 105-B10:2011 | Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation |
| IEC 60099-9:2014 | Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations |
| BS EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U) Specifications for pipes, fittings and the system |
| UNE-EN 1384:2013 | Helmets for equestrian activities |
| DIN EN 13245-1:2010-11 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| UL 514D:2ED 2013-06-28 | Cover Plates for Flush-Mounted Wiring Devices |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| I.S. EN 840-5:2012 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| 09/30204029 DC : 0 | BS EN 61439-1 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| BS EN 15200:2007 | Sanitary appliances. Multifunction shower cabinets |
| ISO 11997-2:2013 | Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 2: Wet (salt fog)/dry/humidity/UV light |
| ISO 10724-2:1998 | Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| IEC 60099-4:2014 | Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
| UNE-EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN ISO 7491:2000 | Dental materials. Determination of colour stability |
| UNE-EN 1385:2012 | Helmets for canoeing and white water sports |
| IEC 60950-22:2016 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| ISO 5674:2004 | Tractors and machinery for agriculture and forestry Guards for power take-off (PTO) drive-shafts Strength and wear tests and acceptance criteria |
| ISO 294-3:2002 | Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates |
| BS EN 13245-1:2010 | Plastics. Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications Designation of PVC-U profiles |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| BS EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| BS EN 14396:2004 | Fixed ladders for manholes |
| ISO 12017:1995 | Plastics Poly(methyl methacrylate) double- and triple-skin sheets Test methods |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 62852:2015 | Connectors for DC-application in photovoltaic systems. Safety requirements and tests |
| BS EN 60950-1 : 2006 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNI EN 840-5 : 2013 | MOBILE WASTE AND RECYCLING CONTAINERS - PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS |
| ISO 9142:2003 | Adhesives Guide to the selection of standard laboratory ageing conditions for testing bonded joints |
| BS EN 671-1:2012 | Fixed firefighting systems. Hose systems Hose reels with semi-rigid hose |
| ISO 19712-3:2007 | Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
| IEC 62275:2013 | Cable management systems - Cable ties for electrical installations |
| UNE-EN 1013:2013 | Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings - Requirements and test methods |
| 14/30303914 DC : 0 | BS EN 50604-1 - SECONDARY LITHIUM BATTERIES FOR LEV (LIGHT ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| ISO 19712-2:2007 | Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| IEC 61439-1:2020 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| 08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| IEC 60335-2-65:2002+AMD1:2008+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-65:Particular requirements for air-cleaning appliances |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN 13329:2016 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| UNE-EN 13206:2017 | Plastics - Thermoplastic covering films for use in agriculture and horticulture |
| UNE-EN ISO 11403-3:2014 | Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:2014) |
| ISO 16474-2:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| 16/30301661 DC : 0 | BS EN 61439-1 ED3.0 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES |
| 16/30242287 DC : 0 | BS EN 62688 - CONCENTRATOR PHOTOVOLTAIC (CPV) MODULE AND ASSEMBLY SAFETY QUALIFICATION |
| BS EN 13341 : 2005 | STATIC THERMOPLASTIC TANKS FOR ABOVE GROUND STORAGE OF DOMESTIC HEATING OILS, KEROSENE AND DIESEL FUELS - BLOW MOULDED AND ROTATIONALLY MOULDED POLYETHYLENE TANKS AND ROTATIONALLY MOULDED TANKS MADE OF ANIONICALLY POLYMERIZED POLYAMIDE 6 - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| IEC 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| UNE-EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| DIN EN 15334:2007-05 | Sanitary appliances - Methacrylic dispersions of high filler content |
| UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| CLC/TS 50467 : 2008 COR 2008 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 62109-1 : 2010 | SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS |
| EN 15334:2007 | Sanitary appliances - Methacrylic dispersions of high filler content |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| EN 14628:2005 | Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods |
| EN 4057-305:2005 | Aerospace series - Cable ties for harnesses - Test methods - Part 305: Colour fastness |
| EN 1384:2017 | Helmets for equestrian activities |
| EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1 700 l - Performance requirements and test methods |
| EN 16153:2013+A1:2015 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 14389-2:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics |
| EN ISO 21809-1:2011 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) (ISO 21809-1:2011) |
| EN ISO 11997-2:2013 | Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2013) |
| EN 16434:2014 | Internal blinds - Protection from strangulation hazards - Requirements and test methods for safety devices |
| EN 397:2012+A1:2012 | Industrial safety helmets |
| EN ISO 16474-2:2013 | Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 16474-2:2013) |
| EN ISO 10724-2:2000 | Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998) |
| EN 14187-8:2017 | Cold applied joint sealants - Test methods - Part 8: Determination of the artificial weathering by UV-irradiation |
| EN 1866-2:2014 | Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| EN 15649-7:2009 | Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 1359:2017 | Gas meters - Diaphragm gas meters |
| EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| EN ISO 9142:2003 | Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) |
| EN 14125:2013 | Thermoplastic and flexible metal pipework for underground installation at petrol filling stations |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN 14389-1:2015 | Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics |
| EN 15187:2006 | Furniture - Assessment of the effect of light exposure |
| EN 15836-2:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 2: Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| EN ISO 7491:2000 | Dental materials - Determination of colour stability (ISO 7491:2000) |
| EN ISO 11431:2002 | Building construction - Jointing products - Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) |
| EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| EN 15752-1:2014 | Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements |
| EN 1866:2005 | Mobile fire extinguishers |
| EN 966:2012+A1:2012 | Helmets for airborne sports |
| EN 4708-001:2014 | Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 001: Technical specification |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| EN 263:2008 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| EN ISO 8936:2017 | Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) |
| EN 1385:2012 | Helmets for canoeing and white water sports |
| EN 15836-1:2010 | Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm |
| EN 812:2012 | Industrial bump caps |
| EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN ISO 105-B10:2011 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| EN 14396:2004 | Fixed ladders for manholes |
| ONORM EN ISO 12402-7 : 2015 | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS (ISO 12402-7:2006 + AMD 1:2011) |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| UNE-EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| 16/30344964 DC : 0 | BS EN 4708-001 - AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| 13/30238193 DC : DRAFT DEC 2013 | BS ISO 16616 - TEST METHODS FOR NATURAL FIBER-REINFORCED PLASTIC COMPOSITE (NFC) DECK BOARDS |
| DIN EN 1013:2015-03 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| 11/30245512 DC : 0 | BS ISO 15398 - SPECIFICATIONS FOR THERMOPLASTICS COVERS AND FRAMES FOR MANHOLES AND INSPECTION CHAMBERS USED IN NON-TRAFFIC AREAS |
| UNI EN 14836 : 2006 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| 17/30348286 DC : 0 | BS EN 17098-1 - PLASTICS - BARRIER FILMS FOR AGRICULTURAL AND HORTICULTURAL SOIL DISINFECTION BY FUMIGATION - PART 1: SPECIFICATIONS FOR BARRIER FILMS |
| DD CEN/TS 15480-1:2007 | Identification card systems. European Citizen Card Physical, electrical and transport protocol characteristics |
| I.S. EN 1866:2006 | MOBILE FIRE EXTINGUISHERS |
| BS ISO 21809-4:2009 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Polyethylene coatings (2-layer PE) |
| ISO 4141-1:2005 | Road vehicles Multi-core connecting cables Part 1: Test methods and requirements for basic performance sheathed cables |
| DD ISO/PAS 11154:2006 | Road vehicles. Roof load carriers |
| 12/30254135 DC : 0 | BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING |
| ISO 9553:1997 | Solar energy — Methods of testing preformed rubber seals and sealing compounds used in collectors |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| UNE-EN 60794-1-22:2015 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| ISO 16616:2015 | Test methods for natural fibre-reinforced plastic composite (NFC) deck boards |
| UNE-EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| BS EN ISO 105-B10:2011 | Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation |
| 17/30335124 DC : 0 | BS EN 13207 - PLASTICS - THERMOPLASTIC SILAGE FILMS AND TUBES FOR USE IN AGRICULTURE |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| 11/30243837 DC : 0 | BS EN 62217 - POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA |
| 09/30208429 DC : 0 | BS EN 50467 - RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| CEI EN 60794-1-22 : 2013 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS |
| DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| 14/30243471 DC : 0 | BS ISO 15082 - ROAD VEHICLES - TESTS FOR RIGID PLASTIC SAFETY GLAZING MATERIALS |
| BS ISO 14486:2012 | Laminate floor coverings. Specification |
| BS 2782-5:Method 540D:1995 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance |
| BS EN ISO 15110:2017 | Paints and varnishes. Artificial weathering including acidic deposition |
| BS EN 62561-3:2017 | Lightning protection system components (LPSC) Requirements for isolating spark gaps (ISG) |
| BS ISO 7628:2010 | Road vehicles. Thermoplastics tubing for air braking systems |
| BS EN ISO 25649-7:2017 | Floating leisure articles for use on and in the water Additional specific safety requirements and test methods for Class E devices |
| I.S. EN 62790:2015 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS |
| 11/30253944 DC : 0 | BS EN 62275 - CABLE MANAGEMENT SYSTEMS - CABLE TIES FOR ELECTRICAL INSTALLATIONS |
| PREN 14836 : DRAFT 2017 | SURFACES FOR SPORTS AREAS - SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - TEST METHOD FOR THE DETERMINATION OF THE RESISTANCE TO EXPOSURE TO ULTRA VIOLET LIGHT ARTIFICIAL WEATHERING |
| BS EN 15836-2:2010 | Plastics. Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools Reinforced membranes of nominal thickness equal to or greater than 1,5 mm |
| 08/30154948 DC : DRAFT FEB 2008 | BS ISO 21809-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 4: POLYETHYLENE COATINGS (2-LAYER PE) |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| 14/30294067 DC : 0 | BS EN 15534-6 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND SYSTEMS |
| CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| EN 60794-3-70:2016 | Optical fibre cables - Part 3-70: Outdoor cables - Family specification for outdoor optical fibre cables for rapid/multiple deployment |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| DIN EN 15534-4:2014-04 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 4: SPECIFICATIONS FOR DECKING PROFILES AND TILES |
| BS EN 124-6:2015 | Gully tops and manhole tops for vehicular and pedestrian areas Gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) |
| 07/30169818 DC : 0 | BS EN 1013 - LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| BS EN 50467:2011 | Railway applications. Rolling stock. Electrical connectors, requirements and test methods |
| UNI EN ISO 19712-2 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 13/30286138 DC : 0 | BS EN 16654 - CHILD PROTECTIVE PRODUCTS - CONSUMER FITTED FINGER PROTECTION DEVICES FOR DOORS - SAFETY REQUIREMENTS AND TEST METHODS |
| OVE/ONORM EN 61969-3 : 2012 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - OUTDOOR ENCLOSURES - PART 3: ENVIRONMENTAL REQUIREMENTS, TESTS AND SAFETY ASPECTS (IEC 61969-3:2011) |
| 03/110340 DC : 0 | BS EN 131-2 - LADDERS - PART 2: REQUIREMENTS, TESTING, MARKING |
| UNE-EN 16281:2013 | Child protective products - Consumer fitted child resistant locking devices for windows and balcony doors - Safety requirements and test methods |
| 10/30196240 DC : 0 | BS ISO 10640 - PLASTICS - METHOD OF ASSESSING ACCELERATED PHOTOAGEING BY FTIR AND UV/VISIBLE SPECTROMETRY |
| I.S. EN 1866-2:2014 | MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| UNE-EN 62561-4:2011 | Lightning protection system components (LPSC) - Part 4: Requirements for conductor fasteners |
| I.S. EN 15534-6:2015 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS |
| UNE-EN 62561-3:2017 | Lightning Protection System Components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) |
| I.S. EN 60079-30-1:2017 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| 06/30137509 DC : DRAFT MAR 2006 | ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 96/709572 DC : DRAFT JUL 1996 | PREN 10287 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - EXTERNAL FUSED POLYETHYLENE BASED COATINGS |
| 08/30189974 DC : DRAFT DEC 2008 | BS EN 13245-1 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 1: DESIGNATION OF PVC-U PROFILES |
| UNE-EN 50289-4-17:2016 | Communication cables - Specifications for test methods - Part 4-17: Test methods for UV resistance evaluation of the sheath of electrical and optical fibre cable |
| PD CEN/TS 15480-1:2012 | Identification card systems. European Citizen Card Physical, electrical and transport protocol characteristics |
| 11/30233262 DC : 0 | BS EN 1871 - ROAD MARKING MATERIALS - PAINT, THERMOPLASTIC AND COLD PLASTIC MATERIALS - SPECIFICATIONS |
| 07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| 08/30171587 DC : DRAFT MAY 2008 | BS ISO 7628 - ROAD VEHICLES - THERMOPLASTICS TUBING FOR AIR BRAKING SYSTEMS |
| DD CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) Characterisation of WPC products |
| BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| BS ISO 15082:2016 | Road vehicles. Tests for rigid plastic safety glazing materials |
| 08/30178592 DC : DRAFT FEB 2008 | BS ISO 6804 - RUBBER AND PLASTICS INLET HOSES AND HOSE ASSEMBLIES FOR WASHING-MACHINES AND DISHWASHERS - SPECIFICATION |
| NF EN 50300 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| PD IEC/TR 62039:2007 | Selection guide for polymeric materials for outdoor use under HV stress |
| UNE-EN 62561-6:2012 | Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) |
| 15/30326965 DC : 0 | BS EN 62561-6 ED. 2 - LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) |
| UNE-EN 13245-3:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 3: Designation of PVC-UE profiles |
| UNE-EN 15651-2:2017 | Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing |
| I.S. EN IEC 60099-8:2018 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| EN ISO 7823-3:2007 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| UNI EN 1013 : 2015 | LIGHT TRANSMITTING SINGLE SKIN PROFILED PLASTICS SHEETS FOR INTERNAL AND EXTERNAL ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| NF EN 60099-8 : 2011 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017 | METALLIC OUTLET BOXES |
| I.S. EN 14836:2006 | SYNTHETIC SURFACES FOR OUTDOOR SPORTS AREAS - EXPOSURE TO ARTIFICIAL WEATHERING |
| CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014 | CONDUIT, TUBING, AND CABLE FITTINGS |
| UNI CEN/TS 15480-1 : 2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 1: PHYSICAL, ELECTRICAL AND TRANSPORT PROTOCOL CHARACTERISTICS |
| ISO 11798:1999 | Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods |
| S.R. CEN/TS 16599:2014 | PHOTOCATALYSIS - IRRADIATION CONDITIONS FOR TESTING PHOTOCATALYTIC PROPERTIES OF SEMICONDUCTING MATERIALS AND THE MEASUREMENT OF THESE CONDITIONS |
| BS EN 15534-6 : 2015 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 6: SPECIFICATIONS FOR FENCING PROFILES AND ELEMENTS |
| IEC 62561-3:2017 | Lightning protection system components (LPSC) - Part 3: Requirements for isolating spark gaps (ISG) |
| BS EN 60068-2-5:2011 | Environmental testing Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing |
| PREN ISO 11963 : DRAFT 2011 | PLASTICS - POLYCARBONATE SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| ISO 12856-1:2014 | Plastics Plastic railway sleepers for railway applications (railroad ties) Part 1: Material characteristics |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| I.S. EN 60099-9:2014 | SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS |
| I.S. EN 16153:2013 | LIGHT TRANSMITTING FLAT MULTIWALL POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 50548:2012 | Junction boxes for photovoltaic modules |
| CEI EN 60099-9 : 2015 | SURGE ARRESTERS - PART 9: METAL-OXIDE SURGE ARRESTERS WITHOUT GAPS FOR HVDC CONVERTER STATIONS |
| I.S. EN 15649-7:2009 | FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 7: ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS FOR CLASS E DEVICES |
| I.S. EN 50526-2:2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| CEI EN 50526-2 : 2014 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - D.C. SURGE ARRESTERS AND VOLTAGE LIMITING DEVICES - PART 2: VOLTAGE LIMITING DEVICES |
| I.S. EN ISO 8936:2017 | AWNINGS FOR LEISURE ACCOMMODATION VEHICLES - REQUIREMENTS AND TEST METHODS (ISO 8936:2017) |
| UNE-EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| I.S. EN 15752-1:2014 | GLASS IN BUILDING - ADHESIVE BACKED POLYMERIC FILM - PART 1: DEFINITIONS AND REQUIREMENTS |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| BS EN 60099-4:2014 | Surge arresters Metal-oxide surge arresters without gaps for a.c. systems |
| I.S. EN 13071-1:2008 | STATIONARY WASTE CONTAINERS UP TO 5000 L, TOP LIFTED AND BOTTOM EMPTIED - PART 1: GENERAL REQUIREMENTS |
| I.S. EN IEC 62688:2018 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
| I.S. EN 60794-1-22:2012 | OPTICAL FIBRE CABLES - PART 1-22: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - ENVIRONMENTAL TEST METHODS (IEC 60794-1-22:2012 (EQV)) |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| I.S. EN 4708-001:2014 | AEROSPACE SERIES - SLEEVING, HEAT-SHRINKABLE, FOR BINDING, INSULATION AND IDENTIFICATION - PART 001: TECHNICAL SPECIFICATION |
| EN IEC 62561-6:2018/AC:2018-04 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 6: REQUIREMENTS FOR LIGHTNING STRIKE COUNTERS (LSC) (IEC 62561-6:2018) |
| UNI EN 1866-2 : 2014 | MOBILE FIRE EXTINGUISHERS - PART 2: REQUIREMENTS FOR THE CONSTRUCTION, PRESSURE RESISTANCE AND MECHANICAL TESTS FOR EXTINGUISHERS, WITH A MAXIMUM ALLOWABLE PRESSURE EQUAL TO OR LOWER THAN 30 BAR, WHICH COMPLY WITH THE REQUIREMENTS OF EN 1866-1 |
| I.S. EN 62561-3:2017 | LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS (ISG) |
| 17/30359853 DC : 0 | BS EN 17142 - MODULAR MULTILAYER FLOOR COVERINGS - ELEMENTS WITH A WOOD POWDER BASED SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| ASTM D 4956 : 2017 : REDLINE | SPECIFICATION FOR RETROREFLECTIVE SHEETING FOR TRAFFIC CONTROL |
| UNE-EN 1866-2:2015 | Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 |
| CEI EN 60099-8 : 2012 | SURGE ARRESTERS - PART 8: METAL-OXIDE SURGE ARRESTERS WITH EXTERNAL SERIES GAP (EGLA) FOR OVERHEAD TRANSMISSION AND DISTRIBUTION LINES OF A.C. SYSTEMS ABOVE 1 KV |
| PREN 50548 : DRAFT 2009 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| ASTM D 5071 : 2006 : R2013 | Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 15110:2017 | Paints and varnishes — Artificial weathering including acidic deposition |
| ISO 16938-1:2008 | Building construction Determination of the staining of porous substrates by sealants used in joints Part 1: Test with compression |
| I.S. CEN TS 15354:2006 | PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
| ISO/TS 13434:2008 | Geosynthetics Guidelines for the assessment of durability |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| ISO 21809-1:2011 | Petroleum and natural gas industries External coatings for buried or submerged pipelines used in pipeline transportation systems Part 1: Polyolefin coatings (3-layer PE and 3-layer PP) |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM D 5592 : 1994 : R2002 : EDT 1 | Standard Guide for Material Properties Needed in Engineering Design Using Plastics |
| IEC/ISO/IEEE 80005-1:2012 | Utility connections in port - Part 1: High Voltage Shore Connection (HVSC) Systems - General requirements |
| S.R. CEN/TS 15480-1:2012 | IDENTIFICATION CARD SYSTEMS - EUROPEAN CITIZEN CARD - PART 1: PHYSICAL, ELECTRICAL AND TRANSPORT PROTOCOL CHARACTERISTICS |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| IEC 60092-306:2009 | Electrical installations in ships - Part 306: Equipment - Luminaires and lighting accessories |
| IEC 62847:2016 | Railway applications - Rolling stock - Electrical connectors - Requirements and test methods |
| DIN EN ISO 12402-7:2015-08 (Draft) | PERSONAL FLOTATION DEVICES - PART 7: MATERIALS AND COMPONENTS - SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN 13575:2012-06 | Static thermoplastic tanks for the above ground storage of chemicals - Blow moulded or rotationally moulded polyethylene tanks - Requirements and test methods |
| DIN EN 12200-1:2016-10 | PLASTICS RAINWATER PIPING SYSTEMS FOR ABOVE GROUND EXTERNAL USE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM |
| DIN EN ISO 7823-1:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| DIN EN 14125:2013-09 | THERMOPLASTIC AND FLEXIBLE METAL PIPEWORK FOR UNDERGROUND INSTALLATION AT PETROL FILLING STATIONS |
| ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
| UNE-EN 13245-1:2011 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| BS EN 13199-3:2000 | Packaging. Small load carrier systems Bond Stackable System (BSS) |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 13200-4:2006 | Spectator facilities Seats. Product characteristics |
| 07/30091745 DC : 0 | BS IEC 62368 - AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - SAFETY - REQUIREMENTS |
| ISO 29664:2010 | Plastics Artificial weathering including acidic deposition |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| BS EN ISO 11963:2012 | Plastics. Polycarbonate sheets. Types, dimensions and characteristics |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS EN 1359:2017 | Gas meters. Diaphragm gas meters |
| BS EN 15334:2007 | Sanitary appliances. Methacrylic dispersions of high filler content |
| IEC 62852:2014 | Connectors for DC-application in photovoltaic systems - Safety requirements and tests |
| BS EN 812:2012 | Industrial bump caps |
| BS EN 13071:2002 | Selective waste collection containers. Above-ground mechanically-lifted containers with capacity from 80 l to 5000 l for selective collection of waste |
| UNE-EN 12574-2:2017 | Stationary waste containers - Part 2: Performance requirements and test methods |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| BS EN 15187:2006 | Furniture. Assessment of the effect of light exposure |
| BS EN 15132:2006 | Container shells for mobile waste containers with a capacity up to 1700 l. Performance requirements and test methods |
| IEC 60335-2-109:2010+AMD1:2013+AMD2:2016 CSV | Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances |
| EN 50548 : 2011 AMD 2 2014 | JUNCTION BOXES FOR PHOTOVOLTAIC MODULES |
| EN 13484:2012 | Helmets for users of luges |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN 12492:2012 | Mountaineering equipment - Helmets for mountaineers - Safety requirements and test methods |
| CEN/TS 16599:2014 | Photocatalysis - Irradiation conditions for testing photocatalytic properties of semiconducting materials and the measurement of these conditions |
| IEC 60794-1-22:2017 RLV | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 13199-3:2000 | Packaging - Small Load Carrier Systems - Part 3: Bond Stackable System (BSS) |
| EN 61914:2016 | Cable cleats for electrical installations |
| CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products |
| CEN/TS 15480-1:2012 | Identification card systems - European Citizen Card - Part 1: Physical, electrical and transport protocol characteristics |
| DIN EN 671-2:2012-07 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
| DIN EN 671-1:2012-07 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| DIN EN 15187:2006-12 | Furniture - Assessment of the effect of light exposure |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| DIN ISO 5912:2004-05 | CAMPING TENTS |
| EN 60099-9:2014 | Surge arresters - Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations |
| EN 62561-6:2011 | Lightning protection system components (LPSC) - Part 6: Requirements for lightning strike counters (LSC) |
| EN 13200-4:2006 | Spectator facilities - Part 4: Seats - Product characteristics |
| EN 131-2:2010+A2:2017 | Ladders - Part 2: Requirements, testing, marking |
| EN 60335-2-109:2010 | Household and similar electrical appliances - Safety - Part 2-109: Particular requirements for UV radiation water treatment appliances |
| EN 62217:2013 | Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria |
| DIN EN 263:2008-06 | Sanitary appliances - Crosslinked cast acrylic sheets for baths and shower trays for domestic purposes |
| EN 50467:2011 | RAILWAY APPLICATIONS - ROLLING STOCK - ELECTRICAL CONNECTORS, REQUIREMENTS AND TEST METHODS |
| EN 50526-1:2012 | Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters |
| DIN EN ISO 11403-3:2002-02 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE MULTIPOINT DATA - PART 3: ENVIRONMENTAL INFLUENCES ON PROPERTIES (ISO 11403-3:2014) |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| DIN ISO 3917:2017-10 | ROAD VEHICLES - SAFETY GLAZING MATERIALS - TEST METHODS FOR RESISTANCE TO RADIATION, HIGH TEMPERATURE, HUMIDITY, FIRE AND SIMULATED WEATHERING (ISO 3917:2016) |
| CEN/TS 16359:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of knot staining resistance of wood coatings |
| EN 13245-1:2010 | Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of PVC-U profiles |
| IEC 60099-8:2017 RLV | Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV |
| CEN/TS 15354:2006 | Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
| DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| IEC 60950-22:2016 RLV | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| EN 50618:2014 | Electric cables for photovoltaic systems |
| DIN EN 10288:2003-12 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| DIN EN 14628:2006-01 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYETHYLENE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| CAN/CSA-C22.2 NO. 60335-2-34:17 | Household and similar electrical appliances — Safety — Part 2-34: Particular requirements for motor-compressors (Binational standard with UL 60335-2-34) |
| CSA C22.2 No. 18-4 : 2004 : R2009 : FR | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| CSA C22.2 No. 18-4 : 2004 : R2013 | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| CSA C22.2 No. 42-1 : 2013 | COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
| UNE-EN 16153:2013 | Light transmitting flat multiwall polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| NBR IEC/TR 62039 : 2010 | SELECTION GUIDE FOR POLYMERIC MATERIALS FOR OUTDOOR USE UNDER HIGH VOLTAGE STRESS |
| UNE-EN 15534-6:2016 | Composites made from cellulose-based materials and thermoplastics (usually called wood-polymer composites (WPC) or natural fibre composites (NFC)) - Part 6: Specifications for fencing profiles and elements |
| OVE/ONORM EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| CAN/CSA-C22.2 NO. 60950-22:17 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22) |
| CSA C22.2 No. 18-4 : 2004 : INC : AMD 2 : 2009 | HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 11341:2004 | Paints and varnishes Artificial weathering and exposure to artificial radiation Exposure to filtered xenon-arc radiation |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| AS 3996:2019 | Access covers and grates |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.