ISO 4762:2004
Current
Current
The latest, up-to-date edition.
Hexagon socket head cap screws
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Language(s)
English, French
Published date
27-02-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4762:2004 specifies the characteristics of hexagon socket head cap screws with coarse pitch thread from M1,6 up to and including M64 and product grade A.
| Committee |
ISO/TC 2/SC 11
|
| DevelopmentNote |
Supersedes ISO/DIS 4762 (03/2004)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN EN ISO 4762 : 2006 | Identical |
| NEN EN ISO 4762 : 2004 | Identical |
| GOST R ISO 4762 : 2012 | Identical |
| AS 1420-2008 | Identical |
| I.S. EN ISO 4762:2004 | Identical |
| NF EN ISO 4762 : 2004 | Identical |
| SS-EN ISO 4762:2004 | Identical |
| BS EN ISO 4762:2004 | Identical |
| SN EN ISO 4762 : 2004 | Identical |
| NS EN ISO 4762 : 2ED 2004 | Identical |
| BIS IS 2269 : 2006 | Identical |
| UNI EN ISO 4762 : 2007 | Identical |
| UNE-EN ISO 4762:2005 | Identical |
| EN ISO 4762:2004 | Identical |
| DIN EN ISO 4762:2004-06 | Identical |
| AS 1420-2001 | Identical |
| DIN 912:1983-12 | Similar to |
| UNE 17056:1981 | Identical |
| NFE 25 125 : 1984 | Similar to |
| EN 14423:2013+A1:2016 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| PD CEN/TS 1317-8:2012 | Road restraint systems Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BIS IS 3406-2 : 2014 | DIMENSIONS FOR COUNTERSINKS AND COUNTERBORES - PART 2: COUNTERBORES |
| DIN ISO 11900-1:2011-10 | Tools for pressing - Ball-lock punch retainers - Part 1: Types A and B, rectangular and square for light duty (ISO 11900-1:2007) |
| 03/319369 DC : DRAFT NOV 2003 | ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| ISO 23481:2013 | Tools for pressing Cam driver plates |
| 10/30234610 DC : DRAFT NOV 2010 | BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| DIN ISO 9183-1:2011-05 | Tools for pressing - Wear plates for press dies - Part 1: Type A (ISO 9183-1:2008) |
| DIN ISO 23480:2014-03 | TOOLS FOR PRESSING - SLIDING PLATES (ISO 23480:2013) |
| BS EN 50033:1991 | Specification for construction and testing of miners\' caplamps in relation to the risk of explosion, for mines susceptible to firedamp |
| 09/30175758 DC : 0 | BS ISO 28238 - COMPRESSION AND INJECTION MOULDS - COMPONENTS FOR GATING SYSTEMS - TERMS |
| NF ISO 9270-2 : 2010 | 7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
| DIN ISO 16366:2010-11 | Tools for pressing - L-shaped guides (ISO 16366:2008) |
| BS ISO 12165:2000 | Tools for moulding. Components of compression and injection moulds and diecasting dies. Terms and symbols |
| I.S. EN ISO 16047:2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005) |
| CEI EN 50033 : 1998 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| ISO 28238:2010 | Compression and injection moulds Components for gating systems |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| ISO 297:1988 | 7/24 tapers for tool shanks for manual changing |
| BS EN 14420-3:2013 | Hose fittings with clamp units Clamp units, bolted or pinned |
| CEN/TS 1317-8:2012 | Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| DIN ISO 11900-3:2005-09 | Tools for pressing - Ball-lock punch retainers - Part 3: Type E, reduced for heavy duty (ISO 11900-3:2004) |
| 06/30151671 DC : DRAFT JUN 2006 | BS ISO 16366 - TOOLS FOR PRESSING - L-SHAPED GUIDES |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| DIN 3015-2:1999-01 | Fastening clamps - Block clamps - Part 2: Heavy duty (S) |
| DIN 3015-1:1999-01 | Fastening clamps - Block clamps - Part 1: Light duty (L) |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| BS ISO 11900-1:2007 | Tools for pressing. Ball-lock punch retainers Types A and B, rectangular and square for light duty |
| DIN ISO 666:2013-12 | MACHINE TOOLS - MOUNTING OF GRINDING WHEELS BY MEANS OF HUB FLANGES (ISO 666:2012) |
| 08/30184358 DC : 0 | BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
| 06/30154618 DC : DRAFT AUG 2006 | ISO 16367 - TOOLS FOR PRESSING - GUIDE PLATES - U- AND V-BLOCKS |
| BS ISO 11900-3:2004 | Tools for pressing. Ball-lock punch retainers Type E, reduced for heavy duty |
| 06/30151668 DC : DRAFT JUN 2006 | BS ISO 9183-1 - TOOLS FOR PRESSING - WEAR PLATES FOR PRESS DIES - PART 1: TYPE A |
| 08/30184361 DC : 0 | BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF |
| BS 4215-8:1987 | Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for insulation caps and bushes |
| PREN 3303 : 1995 | BOLTS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPa (AT AMBIENT TEMPERATURE)/235 DEG C |
| DIN ISO 16367:2010-09 | Tools for pressing - Guide plates - U- and V-blocks (ISO 16367:2008) |
| I.S. EN 14423:2013 | CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN 3303:1997 | Screws, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated. Classification: 1100 MPa (at ambient temperature)/235°C |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| DIN EN 14420-3:2013-09 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| I.S. EN 14752:2015 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| I.S. EN 14420-3:2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| VDI 3003 Blatt 5:2013-10 | Nitrogen gas springs for large stamping dies - Mounting versions |
| VDI 3357:2014-01 | Sliding elements in large stamping dies |
| VDI 3347:2013-10 | Design and use of die buttons in large stamping dies |
| VDI 3363:2017-08 | Shoulder screws, shoulder bushes in stamping and forming dies |
| VDI 3349:2013-09 | Trim steels for large stamping dies |
| VDI 3387:2014-09 | Heel guidings in large stamping and forming dies |
| VDI/VDE 2251 Blatt 1.1:2016-02 | Bolted joints - Tensioned joints - Precision engineering components |
| BS ISO 11900-2:2008 | Tools for pressing. Ball-lock punch retainers Types C and D, reduced for light duty |
| 12/30251305 DC : 0 | BS ISO 15830-1 - ROAD VEHICLES - DESIGN AND PERFORMANCE SPECIFICATIONS FOR THE WORLDSID 50TH PERCENTILE MALE SIDE-IMPACT DUMMY - PART 1: TERMINOLOGY AND RATIONALE |
| 14/30295389 DC : 0 | BS EN 14752 - RAILWAY APPLICATIONS - BODYSIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| BS ISO 15830-1:2013 | Road vehicles. Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Terminology and rationale |
| 17/30338768 DC : 0 | BS ISO 20929 - TOOLS FOR PRESSING - HEEL GUIDE PLATES IN LARGE STAMPING AND FORMING DIES |
| 06/30152154 DC : DRAFT JUNE 2006 | BS ISO 23481 - TOOLS FOR PRESSING - CAM DRIVER PLATES |
| BS ISO 16367:2008 | Tools for pressing. Guide plates. U- and V-blocks |
| 04/30115337 DC : 0 | ISO 666 - MACHINE TOOLS - MOUNTING OF GRINDING WHEELS BY MEANS OF HUB FLANGES |
| ONORM EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012) |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| DIN ISO 23481:2014-11 | Tools for pressing - Cam driver plates (ISO 23481:2013) |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| ISO 11900-3:2004 | Tools for pressing — Ball-lock punch retainers — Part 3: Type E, reduced for heavy duty |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| UNI CEN/TS 1317-8 : 2012 | ROAD RESTRAINT SYSTEMS - PART 8: MOTORCYCLE ROAD RESTRAINT SYSTEMS WHICH REDUCE THE IMPACT SEVERITY OF MOTORCYCLIST COLLISIONS WITH SAFETY BARRIERS |
| ISO 23480:2013 | Tools for pressing — Sliding plates |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| ISO 9270-1:2010 | 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF |
| ISO 11900-2:2008 | Tools for pressing — Ball-lock punch retainers — Part 2: Types C and D, reduced for light duty |
| ISO 666:2012 | Machine tools — Mounting of grinding wheels by means of hub flanges |
| ISO 9271:1992 | Decontamination of radioactively contaminated surfaces — Testing of decontamination agents for textiles |
| UNI EN ISO 10644 : 2009 | SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| EN 3303:1997 | Aerospace series - Screw, cap head, hexagon socket, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature)/235°C |
| UNI EN 14420-3 : 2013 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| BS ISO 23480:2013 | Tools for pressing. Sliding plates |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| DIN ISO 28238:2012-11 | Compression and injection moulds - Components for gating systems (ISO 28238:2010) |
| DIN ISO 11900-2:2011-10 | Tools for pressing - Ball-lock punch retainers - Part 2: Types C and D, reduced for light duty (ISO 11900-2:2008) |
| BS ISO 23481:2013 | Tools for pressing. Cam driver plates |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| 02/713150 DC : DRAFT NOV 2002 | ISO 11900-3 - TOOLS FOR PRESSING - BALL-LOCK PUNCH RETAINERS - PART 3: TYPE E, REDUCED FOR HEAVY DUTY |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| ASTM F 837M : 2016 : REDLINE | Standard Specification for Stainless Steel Socket Head Cap Screws [Metric] |
| BS ISO 666:2012 | Machine tools. Mounting of grinding wheels by means of hub flanges |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| NF ISO 9270-1 : 2010 | 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF |
| 10/30234634 DC : 0 | BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR |
| BS ISO 16366:2008 | Tools for pressing. L-shaped guides |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| DIN 16281:2004-07 | SUPPORT FOR MEASURING INSTRUMENTS AND FITTINGS |
| ISO 9270:1992 | 7/24 tapers for tool shanks for automatic changing Tapers for spindle noses |
| BS ISO 9183-1:2008 | Tools for pressing. Wear plates for press dies Type A |
| BS EN 14752:2015 | Railway applications. Body side entrance systems for rolling stock |
| I.S. EN 50033:1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| S.R. CEN/TS 1317-8:2012 | ROAD RESTRAINT SYSTEMS - PART 8: MOTORCYCLE ROAD RESTRAINT SYSTEMS WHICH REDUCE THE IMPACT SEVERITY OF MOTORCYCLIST COLLISIONS WITH SAFETY BARRIERS |
| UNI EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| 18/30368675 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| ISO 9183-1:2008 | Tools for pressing — Wear plates for press dies — Part 1: Type A |
| ISO 15830-1:2013 | Road vehicles Design and performance specifications for the WorldSID 50th percentile male side-impact dummy Part 1: Terminology and rationale |
| ISO 9270-2:2010 | 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF |
| UNE-EN 14423:2014 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| ISO 16366:2008 | Tools for pressing — L-shaped guides |
| ISO 16367:2008 | Tools for pressing — Guide plates — U- and V-blocks |
| BIS IS 15299 : 2013 | MACHINE TOOLS - MOUNTING OF PLAIN GRINDING WHEELS BY MEANS OF HUB FLANGES |
| ISO 11900-1:2007 | Tools for pressing Ball-lock punch retainers Part 1: Types A and B, rectangular and square for light duty |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| DIN EN 1097-2:2016-07 (Draft) | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| BS EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV |
| I.S. EN 1097-2:2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| DIN EN 14752:2015-05 | RAILWAY APPLICATIONS - BODY SIDE ENTRANCE SYSTEMS FOR ROLLING STOCK |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| UNI EN 1097-2 : 2010 | TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| UNE-EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
| UNE-EN ISO 10644:2010 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| BS EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates Methods for the determination of resistance to fragmentation |
| ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV |
| UNE-EN 14420-3:2014 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| EN 27931:1992 | Insulation caps and bushes for resistance welding equipment (ISO 7931:1985) |
| EN 14420-3:2013 | Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| 16/30320762 DC : 0 | BS EN 1097-2 - TESTS FOR MECHANICAL AND PHYSICAL PROPERTIES OF AGGREGATES - PART 2: METHODS FOR THE DETERMINATION OF RESISTANCE TO FRAGMENTATION |
| PREN 14420-3 : DRAFT 2010 | HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED |
| 12/30265672 DC : 0 | BS ISO 23481 - TOOLS FOR PRESSING - CAM DRIVER PLATES |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| 06/30151787 DC : DRAFT JUN 2006 | BS ISO 23480 - TOOLS FOR PRESSING - SLIDING PLATES |
| 05/30127446 DC : DRAFT JAN 2005 | ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| NF ISO 28238 : 2010 | COMPRESSION AND INJECTION MOULDS - COMPONENTS FOR GATING SYSTEMS |
| BS EN ISO 16047 : 2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| BS EN 14423:2013+A2:2019 | Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar |
| DIN EN 3303:1997-03 | AEROSPACE SERIES - SCREWS, CAP HEAD, HEXAGON SOCKET, COARSE TOLERANCE NORMAL SHANK, MEDIUM LENGTH THREAD, IN ALLOY STEEL, CADMIUM PLATED - CLASSIFICATION: 1100 MPA (AT AMBIENT TEMPERATURE)/235 DEGREES C |
| DIN EN ISO 10644:2009-10 | SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| EN 1097-2:2010 | Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 50033 : 1991 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| EN 14752:2015 | Railway applications - Body side entrance systems for rolling stock |
| DIN EN ISO 16047:2013-01 | Fasteners - Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012); German version EN ISO 16047:2005 + A1:2012 |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 6157-3:1988 | Fasteners — Surface discontinuities — Part 3: Bolts, screws and studs for special requirements |
| ISO 23429:2004 | Gauging of hexagon sockets |
| ISO 4753:2011 | Fasteners Ends of parts with external ISO metric thread |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 965-3:1998 | ISO general purpose metric screw threads Tolerances Part 3: Deviations for constructional screw threads |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.