ISO 4582:2017
Current
Current
The latest, up-to-date edition.
Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
17-08-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4582:2017 specifies methods to determine changes in colour and other appearance properties, and variations in mechanical or other properties, of plastics that have been exposed to glass-filtered solar radiation, to natural weathering or to simulated solar radiation from a laboratory source. The procedure used to analyse data depends on whether the test used to characterize the materials being exposed is destructive or non-destructive. The exposures are conducted under conditions described in specific exposure standards.
| DevelopmentNote |
Supersedes ISO/FDIS 4582. (08/2017)
|
| DocumentType |
Standard
|
| Pages |
16
|
| ProductNote |
THIS STANDARD ALSO REFERS-CIE Publication No. 15,ISO 75 (all parts),ISO 179 (all parts), ISO 527 (all parts), ISO 877 (all parts),ISO 4892 (all parts)
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 4582 : 2017 | Identical |
| UNI ISO 4582:2018 | Identical |
| DIN ISO 4582:2019-03 | Identical |
| SS-ISO 4582:2017 | Identical |
| IS 13360 : Part 8 : Sec 13 : 2021 | Identical |
| BS ISO 4582:2017 | Identical |
| UNI ISO 4582 : 1985 | Identical |
| UNE-ISO 4582:2021 | Identical |
| UNE 53384:2002 | Identical |
| SNV ISO 4582 : 1998 | Identical |
| NS 9514 : 1ED 1985 | Identical |
| UNE-ISO 4582:2014 | Identical |
| BS 2782-5 Method 552A:1981 | Identical |
| NF EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN ISO 877:1997 | |
| UNE-EN 16472:2015 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| I.S. EN 16472:2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| DIN EN 16472:2014-06 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| 05/30133040 DC : DRAFT APR 2005 | BS EN 1866 - MOBILE FIRE EXTINGUISHERS |
| 16/30344238 DC : 0 | BS EN ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| 12/30236297 DC : 0 | BS ISO 16474-4 - PAINTS AND VARNISHES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: CARBON-ARC LAMPS |
| 07/30167330 DC : DRAFT AUG 2007 | BS EN 868-8 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 30013:2011 | Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties |
| EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| 01/107289 DC : DRAFT OCT 2001 | BS XXXX - SPECIFICATION FOR THE TESTING AND PERFORMANCE OF MICROPRISMATIC RETROREFLECTIVE SHEETING MATERIALS |
| BS 2782-5.540F(1995) : AMD 10678 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - FLUORESCENT UV LAMPS |
| UNE-EN ISO 877-1:2011 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| NFT 51 195-5 : 2008 | PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 5: MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| 07/30155372 DC : 0 | BS ISO 877-1 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| 09/30176542 DC : 0 | BS EN ISO 30013 - RUBBER AND THERMOPLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| 09/30179580 DC : 0 | BS EN ISO 29664 - PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| UNE-EN ISO 30013:2012 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| UNI EN ISO 4892-2 : 2013 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
| UNE-EN ISO 175:2011 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| ONORM EN ISO 4892-2 : 2013 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS (ISO 4892-2:2013) |
| EN 10245-1:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| EN ISO 16871:2003 | Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003) |
| EN 10245-2:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| EN 10245-3:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| DIN EN ISO 175:2011-03 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| DIN EN ISO 4611:2011-04 | Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010) |
| EN 1056 : 1996 | METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
| BS 8442:2006 | Miscellaneous road traffic signs and devices. Requirements and test methods |
| PD ISO/TS 19022:2016 | Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance |
| 95/102726 DC : DRAFT MARCH 1995 | PREN 1873 - PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS WITH UPSTANDS |
| BS ISO 16474-4:2013 | Paints and varnishes. Methods of exposure to laboratory light sources Open-flame carbon-arc lamps |
| DIN EN 16472 E : 2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| BS 2782-5.550B(1996) : 1996 AMD 9494 | |
| 07/30155380 DC : 0 | BS ISO 877-3 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| BS EN ISO 877-2:2010 | Plastics. Methods of exposure to solar radiation Direct weathering and exposure behind window glass |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| PREN ISO 4611 : DRAFT 2010 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| BS ISO 2135:2017 | Anodizing of aluminium and its alloys. Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| UNI EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| UNE-EN ISO 877-2:2011 | Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009) |
| BS 2782-5.540E(1995) : 1995 AMD 10725 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - XENON-ARC SOURCES |
| 07/30127284 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO/TS 19022:2016 | Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance |
| UNE-EN ISO 877-3:2011 | Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) |
| DIN EN 868-8:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| CAN/CSA-C22.2 NO. 60079-30-1:17 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements (Adopted IEC/IEEE 60079-30-1:2015, first edition, 2015-09, with Canadian deviations) |
| UNE-EN ISO 105-B10:2012 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| CEI EN 60079-30-1 : 2008 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| PREN 513 : DRAFT 2017 | PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| UNI EN ISO 877-2 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS |
| CSA C22.2 No. 130 : 2016 | REQUIREMENTS FOR ELECTRICAL RESISTANCE TRACE HEATING AND HEATING DEVICE SETS |
| DIN EN ISO 877-3:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| UNE-EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| ISO 7823-3:2007 | Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
| BS EN 3-3:1996 | Portable fire extinguishers Construction, resistance to pressure, mechanical tests |
| BS EN ISO 7823-3:2007 | Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
| DIN EN 1866:1998-11 | MOBILE FIRE EXTINGUISHERS |
| I.S. EN ISO 4892-3:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS (ISO 4892-3:2016) |
| I.S. EN 10245-2:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN ISO 4611:2010 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| I.S. EN 10245-1:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| DIN EN ISO 877-2:2011-03 | Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009) |
| I.S. EN ISO 4892-2:2013 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARCLAMPS (ISO 4892-2:2013) |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN ISO 4892-1:2016 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN ISO 877-1:2011-03 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| I.S. EN ISO 175:2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| I.S. EN 10245-3:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| I.S. EN ISO 7823-3:2007 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
| BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
| BS 2782-5.540D(1999) : 1999 AMD 13148 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - GENERAL GUIDANCE |
| BS 2782-8.830A(1999) : 1999 AMD 13097 | METHODS OF TESTING PLASTICS - OTHER PROPERTIES - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN ISO 16871:2003 | PLASTICS PIPING AND DUCTING SYSTEMS - PLASTICS PIPES AND FITTINGS - METHOD FOR EXPOSURE TO DIRECT (NATURAL) WEATHERING |
| ISO 16474-4:2013 | Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| 10/30206257 DC : 0 | BS EN ISO 4611 - PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| BS ISO 15686-2:2012 | Buildings and constructed assets. Service life planning Service life prediction procedures |
| 11/30211716 DC : 0 | BS EN ISO 4892-2 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
| UNI EN 16472 : 2014 | PLASTICS - METHOD FOR ARTIFICIAL ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| ISO 877-3:2009 | Plastics Methods of exposure to solar radiation Part 3: Intensified weathering using concentrated solar radiation |
| 08/30180847 DC : DRAFT JUNE 2008 | BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 10/30205800 DC : 0 | BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES |
| 17/30368428 DC : 0 | BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
| BS ISO 15314:2004 | Plastics. Methods for marine exposure |
| DIN EN ISO 30013:2012-03 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| 03/105565 DC : 0 | ISO 4892-4 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 4: OPEN-FLAME CARBON-ARC LAMPS |
| PREN 868-8 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| 08/30180835 DC : DRAFT JUNE 2008 | BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| 08/30180838 DC : DRAFT JUNE 2008 | BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| I.S. EN ISO 877-1:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| I.S. EN ISO 30013:2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES (ISO 30013:2011) |
| I.S. EN ISO 29664:2017 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| ISO 2135:2017 | Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light |
| UNE-EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| BS 2782-5 Method 550A:1981 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to natural weathering |
| DIN EN ISO 877-2:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS |
| BS EN 60079-30-1:2017 | Explosive atmospheres Electrical resistance trace heating. General and testing requirements |
| I.S. EN 868-8:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| ASTM G 153 : 2013 : REDLINE | Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| UNI EN 868-8 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 4892-3:2016 | Plastics. Methods of exposure to laboratory light sources Fluorescent UV lamps |
| BS EN 10245-3:2011 | Steel wire and wire products. Organic coatings on steel wire PE coated wire |
| BS EN 1866:2005 | Mobile fire extinguishers |
| ISO 877:1994 | Plastics Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors |
| EN 868-8:2009 | Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods |
| EN ISO 29664:2017 | Plastics - Artificial weathering including acidic deposition (ISO 29664:2010) |
| UNI EN ISO 4611 : 2011 | PLASTICS - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| UNI EN 10245-3 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| UNI EN 10245-1 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| UNI EN 10245-2 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE |
| EN ISO 4611:2010 | Plastics - Determination of the effects of exposure to damp heat, water spray and salt mist (ISO 4611:2010) |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| UNI EN ISO 175 : 2010 | PLASTICS - METHODS OF TEST FOR THE DETERMINATION OF THE EFFECTS OF IMMERSION IN LIQUID CHEMICALS |
| UNI EN ISO 30013 : 2011 | RUBBER AND PLASTICS HOSES - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - DETERMINATION OF CHANGES IN COLOUR, APPEARANCE AND OTHER PHYSICAL PROPERTIES |
| 02/121868 DC : DRAFT APR 2002 | BS ISO 15314 - PLASTICS - METHODS FOR MARINE EXPOSURE |
| UNI EN ISO 105-B10 : 2012 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| 14/30267384 DC : 0 | BS EN 60079-30-1 ED 1.0 - EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL; TYPE TESTING AND DESIGN REQUIREMENTS |
| 11/30211719 DC : 0 | BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS |
| DIN EN ISO 877-1:2016-09 (Draft) | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| BS ISO 29664 : 2010 | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION |
| 03/112830 DC : DRAFT AUG 2003 | BS EN ISO 4892-3 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 3: FLUORESCENT UV LAMPS |
| 18/30344274 DC : DRAFT APR 2018 | BS ISO 21475 - PLASTICS - METHODS OF EXPOSURE TO DETERMINE THE WAVELENGTH DEPENDENT DEGRADATION USING SPECTRALLY DISPERSED RADIATION |
| 14/30253068 DC : 0 | BS EN ISO 4892-1 - PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| 16/30333706 DC : 0 | BS ISO 2135 - ANODIZING OF ALUMINIUM AND ITS ALLOYS - ACCELERATED TEST OF LIGHT FASTNESS OF COLOURED ANODIC OXIDATION COATINGS USING ARTIFICIAL LIGHT |
| BS EN ISO 877-1:2010 | Plastics. Methods of exposure to solar radiation General guidance |
| DIN EN ISO 105-B10:2012-01 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| BS 7825-3.5:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Optical and weathering properties |
| 07/30155375 DC : 0 | BS ISO 877-2 - PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: EXPOSURE TO DIRECT AND GLASS- FILTERED SOLAR RADIATION |
| UNE-EN 60079-30-1:2017 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| BS EN ISO 29664:2017 | Plastics. Artificial weathering including acidic deposition |
| I.S. EN ISO 105-B10:2011 | TEXTILES - TESTS FOR COLOUR FASTNESS - PART B10: ARTIFICIAL WEATHERING - EXPOSURE TO FILTERED XENON-ARC RADIATION (ISO 105-B10:2011) |
| NF EN ISO 877-1 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 1: GENERAL GUIDANCE |
| DIN EN ISO 29664:2016-09 (Draft) | PLASTICS - ARTIFICIAL WEATHERING INCLUDING ACIDIC DEPOSITION (ISO 29664:2010) |
| I.S. EN ISO 877-2:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| NF EN 868-8 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| ONORM EN ISO 877-3 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| I.S. EN ISO 877-3:2010 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| DIN EN ISO 4892-1:2016-10 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| DIN EN ISO 4892-2:2013-06 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN ISO 7823-2:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| BS EN ISO 4611:2010 | Plastics. Determination of the effects of exposure to damp heat, water spray and salt mist |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 4613-2:1995 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| UNE-EN 10245-3:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire |
| BS EN ISO 4892-1:2016 | Plastics. Methods of exposure to laboratory light sources General guidance |
| ISO 105-B10:2011 | Textiles — Tests for colour fastness — Part B10: Artificial weathering — Exposure to filtered xenon-arc radiation |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| ISO 877-1:2009 | Plastics — Methods of exposure to solar radiation — Part 1: General guidance |
| ISO 4611:2010 | Plastics Determination of the effects of exposure to damp heat, water spray and salt mist |
| ISO 877-2:2009 | Plastics — Methods of exposure to solar radiation — Part 2: Direct weathering and exposure behind window glass |
| UNE-EN 10245-2:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire |
| ISO 16871:2003 | Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering |
| BS EN ISO 7491:2000 | Dental materials. Determination of colour stability |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| BS EN ISO 4892-2:2013 | Plastics. Methods of exposure to laboratory light sources Xenon-arc lamps |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| BS EN 10245-1:2011 | Steel wire and wire products. Organic coatings on steel wire General rules |
| UNE-EN 10245-1:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules |
| UNE-EN ISO 4892-2:2014 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| UNE-EN ISO 4892-1:2017 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| DIN EN 10245-1:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN ISO 877-2:2010 | Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009) |
| EN 16472:2014 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| EN ISO 877:1996 | Plastics - Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors (ISO 877:1994) |
| EN ISO 877-1:2010 | Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) |
| EN ISO 30013:2011 | Rubber and plastics hoses - Methods of exposure to laboratory light sources - Determination of changes in colour, appearance and other physical properties (ISO 30013:2011) |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN 3-3 : 1994 | PORTABLE FIRE EXTINGUISHERS - PART 3: CONSTRUCTION, RESISTANCE TO PRESSURE, MECHANICAL TESTS |
| EN 1866:2005 | Mobile fire extinguishers |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| EN ISO 175:2010 | Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
| EN ISO 105-B10:2011 | Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) |
| PREN ISO 4892-2 : DRAFT 2011 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
| I.S. EN 1866:2006 | MOBILE FIRE EXTINGUISHERS |
| NF EN ISO 877-2 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 2: DIRECT WEATHERING AND EXPOSURE BEHIND WINDOW GLASS |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| BS EN ISO 105-B10:2011 | Textiles. Tests for colour fastness Artificial weathering. Exposure to filtered xenon-arc radiation |
| BS EN 16472:2014 | Plastics. Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
| BS 2782-5:Method 540D:1995 | Methods of testing plastics. Optical and colour properties, weathering Methods of exposure to laboratory light sources. General guidance |
| DIN HDBK 400 : 2ED 2014 | BEWITTERUNG - 48 NORMEN ZUR NATUERLICHEN UND KUENSTLICHEN BEWITTERUNG IM ORIGINALTEXT |
| BS EN ISO 877-3:2010 | Plastics. Methods of exposure to solar radiation Intensified weathering using concentrated solar radiation |
| 08/30180841 DC : DRAFT JUNE 2008 | BS EN 10245-3 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 3: PE COATED WIRE |
| 12/30266179 DC : 0 | BS EN 16472 - PLASTICS - METHOD FOR ACCELERATED PHOTOAGEING USING MEDIUM PRESSURE MERCURY VAPOUR LAMPS |
| EN ISO 7823-3:2007 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| I.S. EN 60079-30-1:2017 | EXPLOSIVE ATMOSPHERES - PART 30-1: ELECTRICAL RESISTANCE TRACE HEATING - GENERAL AND TESTING REQUIREMENTS |
| NFT 51 830 : 2002 XP | PLASTICS - METHOD OF EXPOSURE TO LABORATORY LIGHT SOURCES - MEDIUM PRESSURE MERCURY VAPOUR LAMP |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| NF EN ISO 877-3 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFIED WEATHERING USING CONCENTRATED SOLAR RADIATION |
| UNI EN ISO 877-3 : 2011 | PLASTICS - METHODS OF EXPOSURE TO SOLAR RADIATION - PART 3: INTENSIFICATION WEATHERING USING CONCENTRATED SOLAR RADIATION |
| ISO 15314:2004 | Plastics Methods for marine exposure |
| 17/30361211 DC : 0 | BS EN 513 - PLASTICS - POLY(VINYL CHLORIDE) (PVC) BASED PROFILES - DETERMINATION OF THE RESISTANCE TO ARTIFICIAL WEATHERING |
| 17/30360915 DC : 0 | BS EN 868-8 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| EN ISO 877-3:2010 | Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) |
| BS EN 868-8:2009 | Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods |
| I.S. CEN TS 15354:2006 | PLASTICS - EXTRUDED AND/OR CALENDERED, NON-REINFORCED FILM AND SHEETING MADE OF PLASTICIZED POLY(VINYL CHLORIDE) (PVC-P) - GUIDANCE FOR CHARACTERISATION AND DESIGNATION |
| DIN EN ISO 7823-1:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| ISO 30013:2011 | Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties |
| ISO 29664:2010 | Plastics Artificial weathering including acidic deposition |
| BS EN ISO 175:2010 | Plastics. Methods of test for the determination of the effects of immersion in liquid chemicals |
| BS EN 10245-2:2011 | Steel wire and wire products. Organic coatings on steel wire PVC finished wire |
| BS EN ISO 16871:2003 | Plastics piping and ducting systems. Plastics pipes and fittings. Method for exposure to direct (natural) weathering |
| DIN EN 10245-2:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011 |
| DIN EN 10245-3:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 3: PE coated wire; German version EN 10245-3:2011 |
| DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
| CEN/TS 15354:2006 | Plastics - Extruded and/or calendered, non-reinforced film and sheeting made of plasticized poly(vinyl chloride) (PVC-P) - Guidance for characterisation and designation |
| BS 2782-5.551A(1988) : 1988 AMD 10820 | METHODS OF TESTING PLASTICS - OPTICAL AND COLOUR PROPERTIES, WEATHERING - DETERMINATION OF THE EFFECTS OF EXPOSURE TO DAMP HEAT, WATER SPRAY AND SALT MIST |
| ISO 6603-2:2000 | Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing |
| ISO 11664-3:2012 | Colorimetry Part 3: CIE tristimulus values |
| ISO 6721-5:1996 | Plastics Determination of dynamic mechanical properties Part 5: Flexural vibration Non-resonance method |
| ISO 105-A03:1993 | Textiles Tests for colour fastness Part A03: Grey scale for assessing staining |
| ISO 6603-1:2000 | Plastics Determination of puncture impact behaviour of rigid plastics Part 1: Non-instrumented impact testing |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| ISO 13468-1:1996 | Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| ISO 18314-1:2015 | Analytical colorimetry Part 1: Practical colour measurement |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
| ISO 180:2000 | Plastics Determination of Izod impact strength |
| AS 4285:2019 | Rooflights |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 4628-6:2011 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| ISO 10640:2011 | Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy |
| ISO 6721-1:2011 | Plastics Determination of dynamic mechanical properties Part 1: General principles |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 14782:1999 | Plastics Determination of haze for transparent materials |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.