ISO 4225:1994
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Air quality General aspects Vocabulary
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English, English - French
Published date
17-03-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Explains the meanings, in English and French, of a selection of terms commonly used in connection with the sampling and measurement of gases, vapours and particles for the determination. The terms are arranged in alphabetical order in English. An alphabetical index of the French terms is also given.
| DevelopmentNote |
Also numbered as BS 6069-2(1994) (09/2005)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE 77204:1998 | Similar to |
| DIN ISO 4225:1996-08 | Identical |
| PN ISO 4225 : 1999 | Identical |
| SS-ISO 4225:1995 | Identical |
| NF ISO 4225 : 2020 | Identical |
| BS EN 15089:2009 | Explosion isolation systems |
| 11/30204376 DC : 0 | BS ISO 13271 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT HIGHER CONCENTRATIONS BY USE OF VIRTUAL IMPACTORS |
| BS EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust Selection and installation |
| PD ISO/TS 20593:2017 | Ambient air. Determination of the mass concentration of tire and road wear particles (TRWP). Pyrolysis-GC-MS method |
| UNI EN 13237 : 2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| NF ISO 11338-1 : 2005 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GAS AND PARTICLE-PHASE POLYCYCLIC AROMATIC HYDROCARBONS - PART 1: SAMPLING |
| 17/30296869 DC : 0 | BS ISO 16000-36 - INDOOR AIR - PART 36: STANDARD METHOD FOR ASSESSING THE REDUCTION RATE OF CULTURABLE AIRBORNE BACTERIA BY AIR PURIFIERS USING A TEST CHAMBER |
| BS ISO 16000-20:2014 | Indoor air Detection and enumeration of moulds. Determination of total spore count |
| CEI EN 50281-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS - METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| BS EN 50281-1-2:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Selection, installation and maintenance |
| BS ISO 14966:2002 | Ambient air. Determination of numerical concentration of inorganic fibrous particles. Scanning electron microscopy method |
| 07/30162732 DC : 0 | BS EN 60079-10-2 - EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - COMBUSTIBLE DUST ATMOSPHERES |
| I.S. EN 61241-1:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| UNE-EN 15089:2010 | Explosion isolation systems |
| DIN EN ISO/IEC 80079-20-2 E : 2016 COR 1 2018 | EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016) |
| BS ISO 10312:1995 | Ambient air. Determination of asbestos fibres. Direct-transfer transmission electron microscopy method |
| IEC 61241-1-2:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-2: Electrical apparatus protected by enclosures and surface temperature limitation - Selection, installation and maintenance |
| BS EN ISO 16000-7:2007 | Indoor air Sampling strategy for determination of airborne asbestos fibre concentrations |
| UNE-EN 1540:2012 | Workplace exposure - Terminology |
| BS EN 14034-1 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| ISO 16000-20:2014 | Indoor air Part 20: Detection and enumeration of moulds Determination of total spore count |
| BS EN 14373:2005 | Explosion suppression systems |
| EN 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| EN 61241-1:2004/corrigendum Dec. 2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES "TD" |
| EN 13237:2012 | Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| EN 1540:2011 | Workplace exposure - Terminology |
| EN 14373:2005 | Explosion suppression systems |
| EN 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| IEC 61241-2-3:1994 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures |
| UNI ISO/TR 27628 : 2010 | WORKPLACE ATMOSPHERES - ULTRAFINE, NANOPARTICLE AND NANO-STRUCTURED AEROSOLS - INHALATION EXPOSURE CHARACTERIZATION AND ASSESSMENT |
| 14/30273490 DC : 0 | BS ISO 16000-20 - INDOOR AIR - PART 20: DETECTION AND ENUMERATION OF MOULDS - DETERMINATION OF TOTAL SPORE COUNT |
| BS EN 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust Protection by enclosures \'tD\' |
| 02/540287 DC : DRAFT MAR 2002 | BS EN 14373 - EXPLOSION SUPPRESSION SYSTEMS |
| I.S. EN 61241-14:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION |
| BS ISO 18158:2016 | Workplace air. Terminology |
| ISO 11338-2:2003 | Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 2: Sample preparation, clean-up and determination |
| 02/204778 DC : DRAFT JULY 2002 | IEC 61241-0 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| BS EN 50281-3:2002 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| BS ISO 24095:2009 | Workplace air. Guidance for the measurement of respirable crystalline silica |
| BS ISO 11057:2011 | Air quality. Test method for filtration characterization of cleanable filter media |
| BS EN ISO 11771:2010 | Air quality. Determination of time-averaged mass emissions and emission factors. General approach |
| I.S. EN 15089:2009 | EXPLOSION ISOLATION SYSTEMS |
| BS EN 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust Classification of areas where combustible dusts are or may be present |
| BS ISO 13752:1998 | Air quality. Assessment of uncertainty of a measurement method under field conditions using a second method as reference |
| CEI EN 60598-2-24 : 2014 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES |
| ISA 61241-10 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| I.S. EN ISO 23210:2009 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM[10]/PM[2,5] MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS |
| BS ISO 16000-18:2011 | Indoor air Detection and enumeration of moulds. Sampling by impaction |
| C22.1-15 PACKAGE | Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference |
| ISO 18158:2016 | Workplace air Terminology |
| ISO 11042-2:1996 | Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring |
| ISO/TS 20593:2017 | Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC-MS method |
| I.S. EN 61241-10:2004 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 10: CLASSIFICATION OF AREAS WHERE COMBUSTIBLE DUSTS ARE OR MAY BE PRESENT |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN 14034-2:2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| I.S. EN 13237:2012 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| I.S. EN 14034-4:2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| DIN EN 14034-3:2011-04 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds (includes Amendment A1:2011) |
| DIN EN 14034-1:2011-04 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure p<(Index)max> of dust clouds (includes Amendment A1:2011) |
| DIN EN 14034-2:2011-04 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)<(Index)max> of dust clouds (includes Amendment A1:2011) |
| DIN EN 14034-4:2011-04 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds (includes Amendment A1:2011) |
| C22.1HB-18 | Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I |
| I.S. EN 1540:2011 | WORKPLACE EXPOSURE - TERMINOLOGY |
| I.S. EN 14034-3:2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| I.S. EN 14034-1:2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE P[MAX] OF DUST CLOUDS |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| UNI EN 14034-1 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 1: DETERMINATION OF THE MAXIMUM EXPLOSION PRESSURE PMAX OF DUST CLOUDS |
| VDI 3787 Blatt 1:2015-09 | Environmental meteorology - Climate and air pollution maps for cities and regions |
| VDI 3790 Blatt 2:2017-06 | Environmental meteorology - Emissions of gases, odours and dusts from diffuse sources - Landfills |
| VDI 4300 Blatt 11:2013-12 | Measurement of indoor air pollution - Measurement strategies for determination of airborne particles in indoor environment - PM-fraction |
| DIN EN 50281-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS; METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| VDI 3794 Blatt 2:2013-07 | Determination of depositon fluxes of ambient air pollutants - Determination of the deposition flux of ammonia and ammonium compounds by means of the IRMA method |
| VDE 0170-15-2-1 : 1999 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2-1: TEST METHODS; METHODS FOR DETERMINING THE MINIMUM IGNITION TEMPERATURES OF DUST |
| DIN EN 61241-2-2 : 1996 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2: TEST METHODS - SECTION 2: METHOD FOR DETERMINING THE ELECTRICAL RESISTIVITY OF DUST IN LAYERS |
| VDI 3794 Blatt 1:2010-10 | Determination of deposition fluxes of ambient air pollutants - Determination of the deposition fluxes of fluorides, chlorides and sulphur oxides (SOx) by means of the IRMA-method |
| VDE 0170-15-2-2 : 1996 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 2: TEST METHODS - SECTION 2: METHOD FOR DETERMINING THE ELECTRICAL RESISTIVITY OF DUST IN LAYERS |
| VDI 4220:2011-04 | Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air |
| VDI 3475 Blatt 5:2015-10 | Emission control - Biological waste treatment facilities - Anaerobic digestion and post-treatment |
| VDI 2310 Blatt 6:2002-06 | Maximum immission values to protect vegetation - Maximum immission concentration for ozone |
| VDI 2119:2013-06 | Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration |
| DIN ISO 16000-18:2012-01 | Indoor air - Part 18: Detection and enumeration of moulds - Sampling by impaction (ISO 16000-18:2011 + Cor.1:2011) |
| ISO 11057:2011 | Air quality — Test method for filtration characterization of cleanable filter media |
| ISO 24095:2009 | Workplace air Guidance for the measurement of respirable crystalline silica |
| BS ISO 10155:1995 | Stationary source emissions. Automated monitoring of mass concentrations of particles. Performance characteristics, test methods and specifications |
| ISO/TR 27628:2007 | Workplace atmospheres Ultrafine, nanoparticle and nano-structured aerosols Inhalation exposure characterization and assessment |
| DIN EN 15089:2009-07 | EXPLOSION ISOLATION SYSTEMS |
| UNI EN ISO 23210 : 2009 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF PM10/PM2,5 MASS CONCENTRATION IN FLUE GAS - MEASUREMENT AT LOW CONCENTRATIONS BY USE OF IMPACTORS |
| BS EN 60079-10-2:2015 | Explosive atmospheres Classification of areas. Explosive dust atmospheres |
| BS ISO 11338-2:2003 | Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons Sample preparation, clean-up and determination |
| UNI EN 15089 : 2009 | EXPLOSION ISOLATION SYSTEMS |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| UNE-EN 60079-10-2:2016 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| NF ISO 11338-2 : 2004 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GAS AND PARTICLE-PHASE POLYCYCLIC AROMATIC HYDROCARBONS - PART 2: SAMPLE PREPARATION, CLEAN-UP AND DETERMINATION |
| IEC 61241-3:1997 | Electrical apparatus for use in the presence of combustible dust - Part 3: Classification of areas where combustible dust are or may be present |
| IEC 60079-10-2:2015 RLV | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| IEC 60335-2-69:2016 RLV | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| I.S. EN 60598-2-24:2013 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES (IEC 60598-2-24:2013 (EQV)) |
| ISA 12.10.05 : 2004 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS |
| IEC 61241-1-1:1999 | Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus |
| IEC 60335-2-69:2016 | Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use |
| ISO 16000-7:2007 | Indoor air — Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations |
| IEC 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| IEC 61241-14:2004 | Electrical apparatus for use in the presence of combustible dust - Part 14: Selection and installation |
| EN 50281-1-2 : 98 AMD 1 2002 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1-2: ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - SELECTION, INSTALLATION AND MAINTENANCE |
| UNI EN 14034-3 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| UNI EN 14034-2 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| EN 50281-1-1 : 98 AMD 1 2002 | ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - ELECTRICAL APPARATUS PROTECTED BY ENCLOSURES - CONSTRUCTION AND TESTING |
| UNI EN 14034-4 : 2011 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| DIN EN ISO 11771:2011-04 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| DIN EN ISO 23210:2009-12 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| 05/30137627 DC : DRAFT AUG 2005 | EN ISO 16000-7 - INDOOR AIR - PART 7: SAMPLING STRATEGY FOR DETERMINATION OF AIRBORNE ASBESTOS FIBRE CONCENTRATIONS |
| DIN ISO 11057:2012-05 | Air quality - Test method for filtration characterization of cleanable filter media (ISO 11057:2011) |
| PD ISO/TR 27628:2007 | Workplace atmospheres. Ultrafine, nanoparticle and nano-structured aerosols. Inhalation exposure characterization and assessment |
| BS 7643-2:1993 | Building construction. Expression of users\' requirements Air purity requirements |
| 02/205210 DC : DRAFT JULY 2002 | IEC 61241-10 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 10: CLASSIFICATION OF AREAS WHERE COMBUSTIBLE DUSTS ARE OR MAY BE PRESENT |
| 04/30125922 DC : 0 | EN 15089 - EXPLOSION ISOLATION SYSTEMS |
| UNE-EN ISO 23210:2010 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| 15/30269207 DC : 0 | BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| BS ISO 21501-1:2009 | Determination of particle size distribution. Single particle light interaction methods Light scattering aerosol spectrometer |
| 14/30302627 DC : 0 | BS ISO IEC 80079-20-2 - EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS COMBUSTIBLE DUSTS TEST METHODS |
| UNE-EN 60598-2-24:2013 | Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures |
| 98/541503 DC : DRAFT MAY 1998 | PREN 13237-1 - POTENTIALLY EXPLOSIVE ATMOSPHERE - EXPLOSION PREVENTION AND PROTECTION - PART 1: TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 50281-1-1:1999 | Electrical apparatus for use in the presence of combustible dust. Electrical apparatus protected by enclosures Construction and testing |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| DIN ISO 16000-20:2015-11 | INDOOR AIR - PART 20: DETECTION AND ENUMERATION OF MOULDS - DETERMINATION OF TOTAL SPORE COUNT (ISO 16000-20:2014) |
| UNI EN ISO 11771 : 2011 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| ISA 61241-1 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - PROTECTION BY ENCLOSURES "TD" |
| I.S. EN ISO/IEC 80079-20-2:2016 | EXPLOSIVE ATMOSPHERES - PART 20-2: MATERIAL CHARACTERISTICS - COMBUSTIBLE DUSTS TEST METHODS (ISO/IEC 80079-20-2:2016) |
| ISO 14966:2002 | Ambient air Determination of numerical concentration of inorganic fibrous particles Scanning electron microscopy method |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| BS EN 14034-4 : 2004 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 4: DETERMINATION OF THE LIMITING OXYGEN CONCENTRATION LOC OF DUST CLOUDS |
| BS ISO 16814:2008 | Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human occupancy |
| ISO 16000-18:2011 | Indoor air Part 18: Detection and enumeration of moulds Sampling by impaction |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 61241-1:2004 | Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD" |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 16814:2008 | Building environment design — Indoor air quality — Methods of expressing the quality of indoor air for human occupancy |
| BS EN 13237:2012 | Potentially explosive atmospheres. Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
| ISO 11771:2010 | Air quality Determination of time-averaged mass emissions and emission factors General approach |
| ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
| IEC 61241-10:2004 | Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| EN 50281-3:2002 | Equipment for use in the presence of combustible dust - Part 3: Classification of areas where combustible dusts are or may be present |
| EN ISO 23210:2009 | Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) |
| UNI EN 1540 : 2012 | WORKPLACE EXPOSURE - TERMINOLOGY |
| EN 14034-2:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| EN ISO 16000-7:2007 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007) |
| EN 15089:2009 | Explosion isolation systems |
| EN ISO 11771:2010 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| EN 14034-3:2006+A1:2011 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
| EN 14034-4:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| EN 14034-1:2004+A1:2011 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
| 15/30277841 DC : 0 | BS EN 62784 ED 1.0 - PARTICULAR REQUIREMENTS FOR VACUUM CLEANERS AND DUST EXTRACTORS PROVIDING EQUIPMENT PROTECTION LEVEL DC FOR THE COLLECTION OF COMBUSTIBLE DUSTS |
| 10/30234576 DC : DRAFT SEP 2010 | BS EN 60598-2-24 - LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES |
| 02/205211 DC : DRAFT JULY 2002 | IEC 61241-14 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 14: SELECTION AND INSTALLATION |
| UNE-EN ISO 11771:2011 | Air quality - Determination of time-averaged mass emissions and emission factors - General approach (ISO 11771:2010) |
| 02/205209 DC : DRAFT JULY 2002 | IEC 61241-1 ED.1 - ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 1: PROTECTION BY ENCLOSURES 'TD' |
| ISO 10155:1995 | Stationary source emissions — Automated monitoring of mass concentrations of particles — Performance characteristics, test methods and specifications |
| BS EN 60598-2-24:2013 | Luminaires Particular requirements. Luminaires with limited surface temperatures |
| BS EN ISO 23210:2009 | Stationary source emissions. Determination of PM10/PM2,5 mass concentration in flue gas. Measurement at low concentrations by use of impactors |
| BS ISO 11042-2:1996 | Gas turbines. Exhaust gas emission Automated emission monitoring |
| BS EN 50281-2-1:1999 | Electrical apparatus for use in the presence of combustible dust. Test methods Methods of determining minimum ignition temperatures |
| BS ISO 11338-1:2003 | Stationary source emissions. Determination of gas and particle-phase polycyclic aromatic hydrocarbons Sampling |
| I.S. EN 60079-10-2:2015 | EXPLOSIVE ATMOSPHERES - PART 10-2: CLASSIFICATION OF AREAS - EXPLOSIVE DUST ATMOSPHERES |
| ISO 10312:1995 | Ambient air Determination of asbestos fibres Direct transfer transmission electron microscopy method |
| ISO/IEC 80079-20-2:2016 | Explosive atmospheres Part 20-2: Material characteristics Combustible dusts test methods |
| ISO 21501-1:2009 | Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer |
| I.S. EN ISO 11771:2010 | AIR QUALITY - DETERMINATION OF TIME-AVERAGED MASS EMISSIONS AND EMISSION FACTORS - GENERAL APPROACH |
| ISO 11338-1:2003 | Stationary source emissions Determination of gas and particle-phase polycyclic aromatic hydrocarbons Part 1: Sampling |
| IEC 61241-2-1:1994 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 1: Methods for determining the minimum ignition temperatures of dust |
| I.S. EN 50281-3:2002 | EQUIPMENT FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 3: CLASSIFICATION OF AREAS WHERE COMBUSTIBLE DUSTS ARE OR MAY BE PRESENT |
| DIN EN 13237:2013-01 | POTENTIALLY EXPLOSIVE ATMOSPHERES - TERMS AND DEFINITIONS FOR EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
| BS EN 14034-3 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 3: DETERMINATION OF THE LOWER EXPLOSION LIMIT LEL OF DUST CLOUDS |
| BS EN 14034-2 : 2006 | DETERMINATION OF EXPLOSION CHARACTERISTICS OF DUST CLOUDS - PART 2: DETERMINATION OF THE MAXIMUM RATE OF EXPLOSION PRESSURE RISE (DP/DT)[MAX] OF DUST CLOUDS |
| BS EN 1540:2011 | Workplace exposure. Terminology |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 61241-2-2:1995 | Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers |
| DIN EN 14373:2006-01 | Explosion suppression systems |
| EN 50281-2-1 : 98 COR 99 | Electrical apparatus for use in the presence of combustible dust - Part 2-1: Test methods - Methods for determining the minimum ignition temperatures of dust |
| DIN EN ISO 16000-7:2007-11 | Indoor air - Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations (ISO 16000-7:2007) |
| I.S. EN 14373:2005 | EXPLOSION SUPPRESSION SYSTEMS |
| EN 60079-10-2:2015 | Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| EN 60598-2-24:2013 | LUMINAIRES - PART 2-24: PARTICULAR REQUIREMENTS - LUMINAIRES WITH LIMITED SURFACE TEMPERATURES (IEC 60598-2-24:2013) |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| UNE-EN 14034-4:2005 | Determination of explosion characteristics of dust clouds - Part 4: Determination of the limiting oxygen concentration LOC of dust clouds |
| UNE-EN 14034-2:2006 | Determination of explosion characteristics of dust clouds - Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt)max of dust clouds |
| UNE-EN 14034-1:2005 | Determination of explosion characteristics of dust clouds - Part 1: Determination of the maximum explosion pressure pmax of dust clouds |
| UNE-EN 14034-3:2006 | Determination of explosion characteristics of dust clouds - Part 3: Determination of the lower explosion limit LEL of dust clouds |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.