ISO 4017:2014
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Fasteners Hexagon head screws Product grades A and B
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
28-06-2022
Superseded by
Language(s)
English, French
Published date
01-07-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 4017:2014 specifies the characteristics of hexagon head screws with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10d or 150 mm, whichever is the shorter.
| DevelopmentNote |
Supersedes ISO/FDIS 4017. (07/2014)
|
| DocumentType |
Standard
|
| Pages |
10
|
| ProductNote |
THIS STANDARD ALSO HAVE CORRECTED VERSION FOR FRENCH FOR THE YEAR 2015 .
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 4017 : 2015 | Identical |
| GOST R ISO 4017 : 2013 ERRATA 2015 | Identical |
| NF EN ISO 4017 : 2014 | Identical |
| NBN EN ISO 4017 : 2014 | Identical |
| NEN EN ISO 4017 : 2015 | Identical |
| NS EN ISO 4017 : 2014 | Identical |
| I.S. EN ISO 4017:2014 | Identical |
| AS 1110.2:2015 | Identical |
| PN EN ISO 4017 : 2014 | Identical |
| SAC GB/T 5783 : 2016 | Identical |
| SN EN ISO 4017 : 2014 | Identical |
| UNI EN ISO 4017 : 2014 | Identical |
| SS-EN ISO 4017:2014 | Identical |
| UNE-EN ISO 4017:2015 | Identical |
| BS EN ISO 4017:2014 | Identical |
| EN ISO 4017:2014 | Identical |
| NS ISO 4017 : 1992 | Identical |
| DIN ISO 4017 : 1989 | Identical |
| DIN EN 24017:1992-02 | Identical |
| NEN ISO 4017 : 1992 | Identical |
| EN 24017 : 1991 | Identical |
| NFE 25 114 : 1983 | Similar to |
| BIS IS 1364-2 : 2002 | Identical |
| DIN 933:1987-09 | Similar to |
| BS EN 24017:1992 | Identical |
| DIN EN ISO 4017:2015-05 | Identical |
| I.S. EN 24017:1992 | Identical |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| DIN 83208:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - PROTECTING PLATES |
| BIS IS 2577-5 : 2012 | ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| 12/30261215 DC : 0 | BS EN 13060 - SMALL STEAM STERILIZERS |
| 03/319369 DC : DRAFT NOV 2003 | ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING |
| BS ISO 19280:2017 | Corrosion of metals and alloys. Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| 16/30328245 DC : 0 | BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80 |
| 07/30167330 DC : DRAFT AUG 2007 | BS EN 868-8 - PACKAGING MATERIALS FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| BS ISO 8820-5:2015 | Road vehicles. Fuse-links Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| BS EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust General requirements |
| BIS IS 1363-3 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 3: HEXAGON NUTS (SIZE RANGE M 5 TO M 64) |
| PREN 285 : DRAFT 2013 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BIS IS 2577-6 : 2012 | ROAD VEHICLES - FUSE-LINKS - PART 6: SINGLE-BOLT FUSE-LINKS |
| BIS IS 1363-1 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64) |
| UNE-EN 1993-1-8:2013 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints |
| BS ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A |
| PREN 13060 : DRAFT 2012 | SMALL STEAM STERILIZERS |
| PREN 3794 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS |
| I.S. EN ISO 16047:2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005) |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| UNI EN ISO 8676 : 2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| DIN EN 1090-3:2008-09 | EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES |
| BIS IS 1364-6 : 2002 | HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADES A AND B - PART 6: HEXAGON NUTS, STYLE 2 |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| BS EN 1090-3:2008 | Execution of steel structures and aluminium structures Technical requirements for aluminium structures |
| EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| DIN EN ISO 15883-2:2009-09 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| UNE-EN ISO 4033:2013 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| UNE-EN ISO 4014:2011 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| ISO 15883-2:2006 | Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| BS EN ISO 4032:2012 | Hexagon regular nuts (style 1). Product grades A and B |
| UNE-EN ISO 4032:2013 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| 14/30278953 DC : 0 | BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| I.S. EN ISO 4034:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| I.S. EN ISO 4018:2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| EN 50014:1997/A2:1999 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| NBR 15926-2 : 2011 ERRATA 2011 | EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT |
| NBR IEC 60079-0 : 2013 ERRATA 2 2016 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| PREN 1090-3 : DRAFT 2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| 12/30274606 DC : 0 | BS ISO 8820-5 - ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| 03/300201 DC : DRAFT FEB 2003 | IEC 60079-0 ED.4.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| 11/30232899 DC : 0 | BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76 |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| 13/30278676 DC : 0 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| 03/315782 DC : DRAFT SEP 2003 | BS ISO 8820-5 - ROAD VEHICLES - FUSE LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| PREN 3095 : 200P1 | AEROSPACE SERIES - SEALANTS - TEST METHODS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| BS EN 14592 : 2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| I.S. EN 1090-3:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| I.S. EN 13060:2014 | SMALL STEAM STERILIZERS |
| DIN 267-28:2009-09 | Fasteners - Part 28: Steel screws, bolts and studs with locking coating - Technical delivery conditions |
| ISO 6164:1994 | Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar) |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
| DIN EN 1993-1-8:2010-12 | Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009) |
| DIN EN ISO 8675:2016-05 (Draft) | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| DIN EN ISO 8765:2011-06 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| DIN EN ISO 8676:2011-07 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| DIN EN ISO 8673:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| UNE-EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| BS EN ISO 4033:2012 | Hexagon high nuts (style 2). Product grades A and B |
| UNE-EN ISO 8673:2013 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| 09/30206527 DC : 0 | BS EN 60079-0 ED 6.0 - EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0). Product grade B |
| BIS IS/IEC 60079-0 : 2011 | EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| I.S. EN ISO 4032:2012 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| I.S. EN ISO 15883-2:2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| I.S. EN ISO 8673:2012 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8673:2012) |
| I.S. EN ISO 4036:2012 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| I.S. EN ISO 8676:2011 | HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| I.S. EN ISO 8675:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8675:2012) |
| I.S. EN ISO 4033:2012 | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| I.S. EN ISO 4016:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| I.S. EN 15048-2:2016 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| I.S. EN 14180:2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 8765:2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| DIN EN 14180:2003-10 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| I.S. EN ISO 8674:2012 | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| ISA 61241-0 : 2006 | ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - GENERAL REQUIREMENTS |
| I.S. EN ISO 4035:2012 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B (ISO 4035:2012) |
| I.S. EN ISO 4014:2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| NF EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| VDI/VDE 2251 Blatt 1.1:2016-02 | Bolted joints - Tensioned joints - Precision engineering components |
| ONORM EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| DIN EN 50014 : 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| I.S. EN 285:2015 | STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS ISO 4162:2012 | Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B |
| 97/710376 DC : 0 | PREN 3095 - AEROSPACE SERIES - TEST METHODS FOR SEALANTS - DETERMINATION OF EXTENDED ASSEMBLY TIME |
| ONORM EN 1515-4 : 2010 | FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG |
| UNI EN ISO 10683 : 2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| UNI EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| PREN 868-8 : DRAFT 2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| BS EN 50014:1998 | Electrical apparatus for potentially explosive atmospheres. General requirements |
| CSA E60079.0 : 2002 | ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - GENERAL REQUIREMENTS |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
| EN 13060:2014 | Small steam sterilizers |
| DIN EN 868-8:2009-09 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| ISO 6162-2:2018 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
| ISO 13584-511:2006 | Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners |
| DIN 30690-1:2016-04 | CONSTRUCTION ELEMENTS IN THE GAS SUPPLY SYSTEM - PART 1: REQUIREMENTS FOR CONSTRUCTION ELEMENTS IN GAS SUPPLY SYSTEMS |
| SAE J 518/2 : 2017 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62) |
| I.S. EN 868-8:2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| EN 1090-3:2008 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| UNI EN 868-8 : 2009 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| ISO 17842-1:2015 | Safety of amusement rides and amusement devices — Part 1: Design and manufacture |
| IEC 61241-0:2004 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| DIN EN 13060:2015-03 | SMALL STEAM STERILIZERS |
| DIN EN 285:2016-05 | Sterilization - Steam sterilizers - Large sterilizers |
| UNE-EN ISO 4036:2013 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| DIN EN ISO 4034:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C (ISO 4034:2012) |
| DIN EN ISO 8674:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B (ISO 8674:2012) |
| BS EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread. Product grades A and B |
| UNE-EN ISO 4034:2013 | Hexagon regular nuts (style 1) - Product grade C (ISO 4034:2012) |
| BS EN ISO 15883-2:2009 | Washer-disinfectors Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| BS EN ISO 4018:2011 | Hexagon head screws. Product grade C |
| UNE-EN ISO 8674:2013 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| EN 868-8:2009 | Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods |
| UNI EN ISO 4036 : 2013 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B |
| UNI EN ISO 8765 : 2011 | HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| UNI EN ISO 4033 : 2013 | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B |
| UNI EN ISO 4016 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADE C |
| UNI EN ISO 4034 : 2013 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADE C |
| UNI EN ISO 4035 : 2013 | HEXAGON THIN NUTS CHAMFERED (STYLE 0) - PRODUCT GRADES A AND B |
| ONORM EN 14592 : 2012 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| UNI EN ISO 8673 : 2013 | HEXAGON REGULAR NUTS (STYLE 1) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| UNI EN ISO 10644 : 2009 | SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| UNI EN ISO 15883-2 : 2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER- DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| UNI EN ISO 4014 : 2011 | HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B |
| UNI EN ISO 4032 : 2013 | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B |
| UNI EN ISO 8674 : 2013 | HEXAGON HIGH NUTS (STYLE 2) WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B |
| UNI EN 1993-1-8 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS |
| UNI EN ISO 4018 : 2011 | HEXAGON HEAD SCREWS - PRODUCT GRADE C |
| UNI EN ISO 8675 : 2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B |
| UNI EN 14180 : 2014 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| ISO 8820-5:2015 | Road vehicles Fuse-links Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures |
| PREN 17180 : DRAFT 2017 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE VAPORIZED HYDROGEN PEROXIDE STERILIZERS - REQUIREMENTS AND TESTING |
| ONORM EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012) |
| UNI EN 1090-3 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BS 6104-2:1983 | Mechanical properties of fasteners Specification for nuts with specified proof load values |
| 07/30161494 DC : 0 | BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN EN 14592:2012-07 | Timber structures - Dowel-type fasteners - Requirements (includes Amendment A1:2012) |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| DIN ISO 8820-6:2011-05 | Road vehicles - Fuse-links - Part 6: Single-bolt fuse-links (ISO 8820-6:2007) |
| BS ISO 6162-1:2012 | Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| 16/30328759 DC : 0 | BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE |
| SAE J 518/1 : 2013 | HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61) |
| UNE-EN 14592:2009 | Timber structures - Dowel-type fasteners - Requirements |
| UNE-EN 15048-2:2017 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| UNI EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| IEC 60079-0:2017 | Explosive atmospheres - Part 0: Equipment - General requirements |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| 17/30348949 DC : 0 | BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
| UNE-EN 13060:2015 | Small steam sterilizers |
| I.S. EN 14592:2008 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
| I.S. EN 61241-0:2006 | ELECTRICAL APPARATUS FOR USE IN THE PRESENCE OF COMBUSTIBLE DUST - PART 0: GENERAL REQUIREMENTS |
| DIN EN ISO 4032:2016-05 (Draft) | HEXAGON REGULAR NUTS (STYLE 1) - PRODUCT GRADES A AND B (ISO 4032:2012) |
| DIN EN 14180:2014-09 | STERILIZERS FOR MEDICAL PURPOSES - LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS - REQUIREMENTS AND TESTING |
| DIN EN 15048-2:2016-09 | NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE |
| DIN EN 13814:2005-06 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| BS EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV |
| BS EN ISO 4014:2011 | Hexagon head bolts. Product grades A and B |
| UNE-EN ISO 4035:2013 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| BS ISO 17842-1:2015 | Safety of amusement rides and amusement devices Design and manufacture |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| IEC 60079-0:2017 RLV | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| BS EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0). Product grades A and B |
| BS EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread. Product grades A and B |
| BS EN ISO 4016:2011 | Hexagon head bolts. Product grade C |
| UNE-EN 60079-0:2013 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| BS EN 20898-2:1994 | Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
| ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| UNE-EN ISO 8675:2013 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| BS EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread. Product grades A and B |
| BS EN 15048-2:2007 | Non-preloaded structural bolting assemblies Suitability test |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| UNE-EN ISO 10644:2010 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| BS EN 13060 : 2014 | SMALL STEAM STERILIZERS |
| BS EN 285:2015 | Sterilization. Steam sterilizers. Large sterilizers |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| UNE-EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| 05/30134569 DC : DRAFT JUN 2005 | IEC 60079-0. ED. 5.0 - ELECTRICAL APPARATUS FOR EXPLOSIVE ATMOSPHERES - PART 0: GENERAL REQUIREMENTS |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| BS EN 14180:2014 | Sterilizers for medical purposes. Low temperature steam and formaldehyde sterilizers. Requirements and testing |
| ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV |
| BS EN 1993-1-8:2005 | Eurocode 3. Design of steel structures Design of joints |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| UNE-EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| BS EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread. Product grades A and B |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN 13814:2004 | Fairground and amusement park machinery and structures - Safety |
| EN ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) |
| EN ISO 15883-2:2009 | Washer-disinfectors - Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. (ISO 15883-2:2006) |
| EN ISO 4018:2011 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| EN ISO 8676:2011 | Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) |
| EN ISO 10644:2009 | Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) |
| EN ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) |
| EN 20898-2 : 1993 | MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES - COARSE THREAD (ISO 898-2:1992) |
| EN ISO 4032:2012 | Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) |
| EN ISO 4033:2012 | Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012) |
| EN ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012) |
| EN 15048-2:2016 | Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| EN ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012) |
| EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012) |
| EN ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012) |
| DIN ISO 8820-5:2011-05 | ROAD VEHICLES - FUSE-LINKS - PART 5: FUSE-LINKS WITH AXIAL TERMINALS (STRIP FUSE-LINKS) TYPES SF 30 AND SF 51 AND TEST FIXTURES |
| I.S. EN 60079-0:2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011 (MOD)) |
| I.S. EN 13814:2005 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
| 02/121895 DC : DRAFT APR 2002 | BS EN 13060 - SMALL STEAM STERILIZERS |
| BIS IS 15855 : 2010 | COTTON SEED DELINTING MACHINERY - SURGE BIN MACHINE - SPECIFICATION |
| DIN 83205:2002-08 | STAIRS AND GUARD RAILS FOR ENGINE ROOMS AND BOILER ROOMS IN SEAGOING SHIPS - GUARD RAILS |
| ISO 19280:2017 | Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| DIN 19558:2002-12 | WASTEWATER TREATMENT PLANTS - OUTLET INSTALLATIONS, WEIR AND SCUM BAFFLE, SUBMERGED EFFLUENT PIPES IN TANKS - CONSTRUCTION PRINCIPLES, MAIN DIMENSIONS, LAYOUT |
| DIN 3237-1:1994-10 | STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING |
| ISO 16047:2005 | Fasteners — Torque/clamp force testing |
| CSA Z15883-2 : 2009 : R2014 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| 05/30127446 DC : DRAFT JAN 2005 | ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS |
| PREN 3795 : 200P1 | AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE |
| AAMI ST15883-2 : 2013 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| BS ISO 8820-6:2007 | Road vehicles. Fuse-links Single-bolt fuse-links |
| ISO 8820-6:2007 | Road vehicles Fuse-links Part 6: Single-bolt fuse-links |
| CSA Z15883-2 : 2009 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANAESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| BS EN 60079-0 : 2012 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| BS EN ISO 16047 : 2005 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread Small series Product grade A |
| UNE-EN 1090-3:2011 | Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures |
| 17/30360915 DC : 0 | BS EN 868-8 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285 - REQUIREMENTS AND TEST METHODS |
| BS EN 868-8:2009 | Packaging for terminally sterilized medical devices Re-usable sterilization containers for steam sterilizers conforming to EN 285. Requirements and test methods |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| DIN EN ISO 10644:2009-10 | SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV |
| DIN EN ISO 4033:2016-05 (Draft) | HEXAGON HIGH NUTS (STYLE 2) - PRODUCT GRADES A AND B (ISO 4033:2012) |
| UNE-EN 285:2016 | Sterilization - Steam sterilizers - Large sterilizers |
| BS EN ISO 4034:2012 | Hexagon regular nuts (style 1). Product grade C |
| BS EN 13814:2004 | Fairground and amusement park machinery and structures. Safety |
| UNE-EN ISO 4016:2011 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| BS EN ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread. Product grades A and B |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| DIN EN ISO 4016:2011-06 | Hexagon head bolts - Product grade C (ISO 4016:2011) |
| DIN 267-27:2009-09 | Fasteners - Part 27: Steel screws, bolts and studs with adhesive coating - Technical delivery conditions |
| DIN EN ISO 4036:2013-04 | HEXAGON THIN NUTS UNCHAMFERED (STYLE 0) - PRODUCT GRADE B (ISO 4036:2012) |
| DIN EN ISO 4014:2011-06 | Hexagon head bolts - Product grades A and B (ISO 4014:2011) |
| DIN EN ISO 16047:2013-01 | Fasteners - Torque/clamp force testing (ISO 16047:2005 + Amd 1:2012); German version EN ISO 16047:2005 + A1:2012 |
| EN 61241-0:2006 | Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements |
| DIN EN ISO 4018:2011-07 | Hexagon head screws - Product grade C (ISO 4018:2011) |
| ASME B18.2.3.1M : 1999 | METRIC HEX CAP SCREWS |
| CSA C22.2 No. 60079.0 : 2015 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
| ASME B18.2.3.1M : 1999 : R2011 | METRIC HEX CAP SCREWS |
| ASME B18.2.3.1M : 1999 : R2005 | METRIC HEX CAP SCREWS |
| ISO 10511:2012 | Prevailing torque type hexagon thin nuts (with non-metallic insert) |
| ISO 8839:1986 | Mechanical properties of fasteners Bolts, screws, studs and nuts made of non-ferrous metals |
| ISO 4035:2012 | Hexagon thin nuts chamfered (style 0) — Product grades A and B |
| ISO 8675:2012 | Hexagon thin nuts chamfered (style 0) with metric fine pitch thread — Product grades A and B |
| ISO 8673:2012 | Hexagon regular nuts (style 1) with metric fine pitch thread — Product grades A and B |
| ISO 8765:2011 | Hexagon head bolts with metric fine pitch thread Product grades A and B |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 10684:2004 | Fasteners — Hot dip galvanized coatings |
| ISO 21670:2014 | Fasteners — Hexagon weld nuts with flange |
| ISO 7042:2012 | Prevailing torque type all-metal hexagon high nuts — Property classes 5, 8, 10 and 12 |
| ISO 4042:1999 | Fasteners Electroplated coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 4753:2011 | Fasteners Ends of parts with external ISO metric thread |
| ISO 8674:2012 | Hexagon high nuts (style 2) with metric fine pitch thread — Product grades A and B |
| ISO 7720:2012 | Prevailing torque type all-metal hexagon nuts, style 2 Property class 9 |
| ISO 4016:2011 | Hexagon head bolts Product grade C |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 6157-1:1988 | Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements |
| ISO 4034:2012 | Hexagon regular nuts (style 1) Product grade C |
| ISO 8676:2011 | Hexagon head screws with metric fine pitch thread Product grades A and B |
| ISO 4161:2012 | Hexagon nuts with flange, style 2 — Coarse thread |
| ISO 7043:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert), style 2 — Product grades A and B |
| ISO 4015:1979 | Hexagon head bolts — Product grade B — Reduced shank (shank diameter approximately equal to pitch diameter) |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
| ISO 4032:2012 | Hexagon regular nuts (style 1) — Product grades A and B |
| ISO 15072:2012 | Hexagon bolts with flange with metric fine pitch thread Small series Product grade A |
| ISO 3508:1976 | Thread run-outs for fasteners with thread in accordance with ISO 261 and ISO 262 |
| ISO 4036:2012 | Hexagon thin nuts unchamfered (style 0) Product grade B |
| ISO 7719:2012 | Prevailing torque type all-metal hexagon regular nuts — Property classes 5, 8 and 10 |
| ISO 10513:2012 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread — Property classes 8, 10 and 12 |
| ISO 15071:2011 | Hexagon bolts with flange Small series Product grade A |
| ISO 10512:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread — Property classes 6, 8 and 10 |
| ISO 7040:2012 | Prevailing torque type hexagon regular nuts (with non-metallic insert) — Property classes 5, 8 and 10 |
| ISO 12125:2012 | Prevailing torque type hexagon nuts with flange (with non-metallic insert) with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 888:2012 | Fasteners — Bolts, screws and studs — Nominal lengths and thread lengths |
| ISO 4033:2012 | Hexagon high nuts (style 2) — Product grades A and B |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
| ISO 7041:2012 | Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| ISO 10663:2012 | Hexagon nuts with flange, style 2 — Fine pitch thread |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 7044:2012 | Prevailing torque type all-metal hexagon nuts with flange, style 2 — Product grades A and B |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| ISO 4014:2011 | Hexagon head bolts Product grades A and B |
| ISO 4018:2011 | Hexagon head screws Product grade C |
| ISO 12126:2012 | Prevailing torque type all-metal hexagon nuts with flange with metric fine pitch thread, style 2 — Product grades A and B |
| ISO 4162:2012 | Hexagon bolts with flange Small series Product grade A with driving feature of product grade B |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.