ISO 3679:2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Determination of flash no-flash and flash point — Rapid equilibrium closed cup method
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
04-11-2022
Superseded by
Language(s)
English, French
Published date
25-02-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 3679:2015 specifies procedures for flash point tests, within the temperature range of -30 °C to 300 °C, for paints, including water-borne paints, varnishes, binders for paints and varnishes, adhesives, solvents, petroleum, and related products. The procedures are used to determine whether a product will or will not flash at a specified temperature (flash no-flash Procedure A) or the flash point of a sample (Procedure B). When used in conjunction with a flash detector, ISO 3679:2015 is also suitable to determine the flash point of fatty acid methyl esters (FAME).
| DevelopmentNote |
Supersedes ISO/DIS 3679 and ISO 3680. (02/2015)
|
| DocumentType |
Standard
|
| Pages |
22
|
| ProductNote |
THIS STANDARD ALSO REFERS TO Research Report ASTM D01 RR: 1000,Research Report ASTM D02 RR: S15-1010,
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 3679 : 2015 | Identical |
| DS EN ISO 3679 : 2015 | Identical |
| BS 2000-523(2015) : 2015 | Identical |
| NF EN ISO 3679 : 2015 | Identical |
| NBN EN ISO 3679 : 2015 | Identical |
| NEN EN ISO 3679 : 2015 | Identical |
| NS EN ISO 3679 : 2015 | Identical |
| I.S. EN ISO 3679:2015 | Identical |
| PN EN ISO 3679 : 2015 | Identical |
| SN EN ISO 3679 : 2015 | Identical |
| UNI EN ISO 3679 : 2005 | Identical |
| SS-EN ISO 3679:2015 | Identical |
| UNE-EN ISO 3679:2015 | Identical |
| BS EN ISO 3679:2015 | Identical |
| EN ISO 3679:2015 | Identical |
| DIN EN ISO 3679:2015-06 | Identical |
| I.S. EN 456:1992 | Identical |
| GOST R ISO 3679 : 2010 | Identical |
| BS 3900-A14:1986 | Identical |
| BS 6664-4:1991 | Similar to |
| EN 456 : 1991 | Corresponds |
| BS EN 456:1991 | Similar to |
| I.S. EN 3840:2007 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| 09/30205523 DC : 0 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS 2000-602(2013) : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| ONORM EN 4687 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| 03/300855 DC : DRAFT JAN 2003 | ISO 3680 - DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS 6782-16.1(2000) : 2000 AMD 15238 | BINDERS FOR PAINTS AND VARNISHES - PART 16: METHODS FOR TEST FOR ALKYD RESINS - SECTION 16.1: GENERAL METHODS |
| BS 6782-14.1(2000) : 2000 AMD 10883 | BINDERS FOR PAINTS AND VARNISHES - PART 14 - METHODS OF TEST FOR ALKYD RESINS - SECTION 14.1 - GENERAL METHODS |
| PREN ISO 13736 : DRAFT 2011 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| PREN 2435-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - PART 05: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| ISO 15167:1999 | Petroleum products Determination of particulate content of middle distillate fuels Laboratory filtration method |
| UNI EN ISO 9038 : 2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS |
| S.R. CWA 16379:2011 | FUELS AND BIOFUELS - PURE PLANT OIL FUEL FOR DIESEL ENGINE CONCEPTS - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9038:2013 | Determination of sustained combustibility of liquids |
| BS EN 2436-006:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromate-free two component cold curing epoxy primer High corrosion resistance for military application |
| BS EN ISO 11909:2007 | Binders for paints and varnishes. Polyisocyanate resins. General methods of test |
| UNE-EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| CEN/TR 15138:2005 | Petroleum products and other liquids - Guide to flash point testing |
| I.S. EN 1860-3:2003 | APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUEING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE APPLIANCES - REQUIREMENTS AND TEST METHODS |
| ONORM EN 1860-3 : 2006 | APPLIANCES, SOLID FUELS AND FIRELIGHTERS FOR BARBECUING - PART 3: FIRELIGHTERS FOR IGNITING SOLID FUELS FOR USE IN BARBECUE - REQUIREMENTS AND TEST METHODS |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| 14/30304007 DC : 0 | BS EN 62899-2-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 2-1: CONDUCTIVE MATERIAL INK |
| 11/30214536 DC : 0 | BS EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| 16/30294369 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| BS EN 60464-2:2001 | Varnishes used for electrical insulation Methods of test |
| EN ISO 9038:2013 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| BS 2000-524(2004) : 2004 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-524: DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| 09/30205299 DC : 0 | BS EN 4688 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATED TWO COMPONENT COLD CURING EPOXY PRIMER - HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| 07/30174613 DC : 0 | BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| BS 2000-170(1998) : 1998 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - PETROLEUM PRODUCTS AND OTHER LIQUIDS - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| BS 7952:2001 | Specification for chemical firelighters in solid form used for the ignition of solid fuels in residential heating and cooking appliances |
| ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
| PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| I.S. EN 4687:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| IEC 62899-202:2016 | Printed electronics - Part 202: Materials - Conductive ink |
| BS EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS 2000-34(2016) : 2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| ASTM D 3278 : 1996 : R2004 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| UNI EN ISO 13736 : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD |
| UNI EN 4476 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ASTM D 3278 : 1996 : R2011 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
| DIN EN 1860-3:2003-12 | Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecue appliances; Requirements and test methods; German version EN 1860-3:2003 |
| DIN EN ISO 7142:2007-05 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| DIN EN ISO 9038:2013-12 | Determination of sustained combustibility of liquids (ISO 9038:2013) |
| DIN EN 14214:2014-06 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| BS EN 4588:2007 | Aerospace series. Paints and varnishes. Two component, cold curing polyurethane paint, anti slip |
| I.S. EN ISO 9038:2013 | DETERMINATION OF SUSTAINED COMBUSTIBILITY OF LIQUIDS (ISO 9038:2013) |
| I.S. EN ISO 11909:2007 | BINDERS FOR PAINTS AND VARNISHES - POLYISOCYANATE RESINS - GENERAL METHODS OF TEST |
| I.S. EN ISO 13736:2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| DIN ISO 6744-1:2002-11 | BINDERS FOR PAINTS AND VARNISHES - ALKYD RESINS - PART 1: GENERAL METHOD OF TEST |
| UNI EN 4687 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE NON CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION |
| I.S. EN ISO 7142:2007 | BINDERS FOR PAINTS AND VARNISHES - EPOXY RESINS - GENERAL METHODS OF TEST |
| EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
| I.S. EN ISO 2719:2016 | DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD (ISO 2719:2016) |
| BS 3900-A13:1986 | Methods of test for paints Test for flash/no flash (rapid equilibrium method) |
| BS 3900-A9:1986 | Methods of test for paints Determination of flashpoint (closed cup equilibrium method) |
| 01/122379 DC : DRAFT JULY 2001 | BS EN 14214 - AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| EN ISO 13736:2013 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| I.S. EN ISO 3680:2004 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| BS IEC 62899-202:2016 | Printed electronics Materials. Conductive ink |
| 15/30301302 DC : 0 | BS EN ISO 2719 - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| PD ISO/TR 11018:2001 | Essential oils. General guidance on the determination of flashpoint |
| BS EN 4476:2011 | Aerospace series. Paints and varnishes. Cold curing intermediate coat |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. CEN/TR 15160:2005 | PETROLEUM AND RELATED PRODUCTS - APPLICABILITY OF DIESEL FUEL TEST METHODS FOR FATTY ACID METHYL ESTERS (FAME) - INFORMATION AND RESULTS ON ROUND ROBIN TESTS |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN 14214:2012 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 60455-2:2015 | RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| UNI EN 14214 : 2014 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| ISO 18436-5:2012 | Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 5: Lubricant laboratory technician/analyst |
| I.S. EN 60464-2:2002 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| BS EN ISO 3680:2004 | Methods of test for petroleum and its products. BS 2000-524. Determination of flash/no flash. Rapid equilibrium closed cup method |
| BS EN ISO 6744-1:2004 | Binders for paints and varnishes. Alkyd resins General methods |
| CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
| 06/30138176 DC : 0 | EN ISO 13736 - DETERMINATION OF FLASH POINT - ABEL CLOSED CUP METHOD |
| PD CEN/TR 15160:2005 | Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests |
| 09/30205293 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 03/310937 DC : DRAFT JUNE 2003 | EN 2436-6 - AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION RESISTANT CHROMATE FREE TWO COMPONENT COLD CURING PRIMER - PART 6: HIGH CORROSION RESISTANCE FOR MILITARY APPLICATION |
| DIN 55680:1983-08 | PAINTS, VARNISHES AND RELATED PRODUCTS; FLASH/NO FLASH TEST; RAPID EQUILIBRIUM METHOD; ISO 3680 MODIFIED |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
| BS 2000-34(2002) : 2002 AMD 15248 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF FLASH POINT - PENSKY-MARTENS CLOSED CUP METHOD |
| BS ISO 18436-5:2012 | Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Lubricant laboratory technician/analyst |
| PREN 14214 : DRAFT 2009 | AUTOMOTIVE FUELS - FATTY ACID METHYL ESTERS (FAME) FOR DIESEL ENGINES - REQUIREMENTS AND TEST METHODS |
| BS 6782-8(1996) : 1996 AMD 10178 | BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR AMINO RESINS |
| BS 6782-9(1996) : 1996 AMD 10179 | BINDERS FOR PAINTS - GENERAL METHODS OF TEST FOR POLYISOCYANATE RESINS |
| BS 2000-170(2013) : 2013 | DETERMINATION OF FLASH POINT - ABEL CLOSED-CUP METHOD (ISO 13736:2013) |
| DIN ISO 8217:2013-12 | PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS (ISO 8217:2012) |
| 18/30369065 DC : DRAFT FEB 2018 | BS EN 14214 AMD 2 - LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| PREN 4588 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT, COLD CURING POLYURETHANE PAINT, ANTI SLIP |
| I.S. CEN/TR 15138:2005 | PETROLEUM PRODUCTS AND OTHER LIQUIDS - GUIDE TO FLASH POINT TESTING |
| ISO/TR 11018:1997 | Essential oils General guidance on the determination of flashpoint |
| GOST 849:2018 | Primary nickel. SpecificationsE |
| DIN EN ISO 11909:2007-05 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| DIN EN ISO 13736:2013-08 | Determination of flash point - Abel closed-cup method (ISO 13736:2013) |
| BS EN ISO 13736:2008 | Determination of flash point. Abel closed-cup method |
| BS EN ISO 7142:2007 | Binders for paints and varnishes. Epoxy resins. General methods of test |
| BS EN ISO 2719:2002 | Determination of flash point. Pensky-Martens closed cup method |
| IEC 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 11908:1996 | Binders for paints and varnishes — Amino resins — General methods of test |
| IEC 60464-2:2001+AMD1:2006 CSV | Varnishes used for electrical insulation - Part 2: Methods of test |
| ISO 6744-1:1999 | Binders for paints and varnishes — Alkyd resins — Part 1: General methods of test |
| ISO 11909:2007 | Binders for paints and varnishes — Polyisocyanate resins — General methods of test |
| ISO 9038:2013 | Determination of sustained combustibility of liquids |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO 3680:2004 | Determination of flash/no flash Rapid equilibrium closed cup method |
| BS EN 2435-005:2006 | Aerospace series. Paints and varnishes. Corrosion resistant chromated two component cold curing primer High corrosion resistance for military application |
| ISO 13736:2013 | Determination of flash point Abel closed-cup method |
| UNE-EN ISO 2719:2017 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| ISO 7142:2007 | Binders for paints and varnishes — Epoxy resins — General methods of test |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN ISO 11908:1998 | Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996) |
| EN ISO 7142:2007 | Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2007) |
| EN 4476:2011 | Aerospace series - Paints and varnishes - Cold curing intermediate coat |
| EN ISO 11909:2007 | Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
| EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
| EN 2435-005:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN ISO 6744-1:2004 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
| EN ISO 1523:2002 | Determination of flash point - Closed cup equilibrium method (ISO 1523:2002) |
| EN 4588:2007 | Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip |
| EN 2436-006:2006 | Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application |
| PD CEN/TR 15138:2005 | Petroleum products and other liquids. Guide to flash point testing |
| 09/30205302 DC : 0 | BS EN 4687 - AEROSPACE SERIES - PAINTS AND VARNISHES - CHROMATE FREE (NON CORROSION INHIBITING) TWO COMPONENT COLD CURING PRIMER - CHROMAT FREE PRIMER FOR MILITARY APPLICATION |
| 93/708490 DC : 0 | PREN 3840 - AEROSPACE SERIES - PAINTS AND VARNISHES TECHNICAL SPECIFICATION |
| DIN EN 3840:2007-10 | Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007 |
| 01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| ONORM EN 4689 : 2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| BS EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation Methods of test |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 01/124221 DC : DRAFT NOV 2001 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| 17/30371000 DC : 0 | BS EN 4476 - AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| 09/30206973 DC : 0 | BS ISO 8217 - PETROLEUM PRODUCTS - FUELS (CLASS F) - SPECIFICATIONS OF MARINE FUELS |
| BS EN 3840:2007 | Aerospace series. Paints and varnishes. Technical specification |
| PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| PREN 3840 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - TECHNICAL SPECIFICATION |
| UNI ISO 18436-5 : 2013 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 5: LUBRICANT LABORATORY TECHNICIAN/ANALYST |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| UNE-EN 14214:2013 | Liquid petroleum products - Fatty acid methyl esters (FAME) for use in diesel engines and heating applications - Requirements and test methods |
| I.S. EN 4476:2011 | AEROSPACE SERIES - PAINTS AND VARNISHES - COLD CURING INTERMEDIATE COAT |
| ASTM D 3278 : 1996 : EDT 1 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus |
| BS EN ISO 1523:2002 | Method of test for petroleum and its products. Determination of flash point. Closed cup equilibrium method |
| BS EN ISO 11908:1998 | Binders for paints and varnishes. Amino resins. General methods of test |
| BS EN 1860-3:2003 | Appliances, solid fuels and firelighters for barbecueing Firelighters for igniting solid fuels for use in barbecue appliances. Requirements and test methods |
| BS EN ISO 1516:2002 | Method of test for petroleum and its products. Determination of flash/no flash. Closed cup equilibrium method |
| BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
| DIN EN ISO 6744-1:2004-09 | Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) |
| DIN EN 14214:2003-11 | LIQUID PETROLEUM PRODUCTS - FATTY ACID METHYL ESTERS (FAME) FOR USE IN DIESEL ENGINES AND HEATING APPLICATIONS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 3680:2004-07 | DETERMINATION OF FLASH/NO FLASH - RAPID EQUILIBRIUM CLOSED CUP METHOD |
| EN 60464-2:2001/A1:2006 | VARNISHES USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST |
| EN 60455-2:2015 | Resin based reactive compounds used for electrical insulation - Part 2: Methods of test |
| ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
| ISO 1516:2002 | Determination of flash/no flash — Closed cup equilibrium method |
| ISO/TR 29662:2009 | Petroleum products and other liquids Guidance for flash point testing |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| CEN/TR 15160:2005 | Petroleum and related products - Applicability of diesel fuel test methods for Fatty Acid Methyl Esters (FAME) - Information and results on round robin tests |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1523:2002 | Determination of flash point — Closed cup equilibrium method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO Guide 34:2009 | General requirements for the competence of reference material producers |
| ASTM E 1137 : 1997 | Standard Specification for Industrial Platinum Resistance Thermometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.