ISO 3448:1992
Current
Current
The latest, up-to-date edition.
Industrial liquid lubricants — ISO viscosity classification
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
09-09-1992
£38.00
Excluding VAT
Establishes a system of viscosity classification for industrial liquid lubricants and related fluids including mineral oils used as lubricants, hydraulic fluids, electrical oils and for other applications. The usual method for kinematic-viscosity determination is that specified in ISO 3104. There may be some pure chemicals and naturally occurring products, used as lubricants, which will not fall within the classification.
| Committee |
ISO/TC 28
|
| DevelopmentNote |
Also numbered as BS 4231(1992) (07/2005)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN E 48 103 : 1988 | Identical |
| NF ISO 3448 : 1993 | Identical |
| NBN E 48 012 : 1987 | Identical |
| NBN E 48 105 : 1987 | Identical |
| NBN E 48 112 : 1987 | Identical |
| PN ISO 3448 : 2009 | Identical |
| NBN ISO 3448 : 2002 | Identical |
| DIN ISO 3448:2010-02 | Identical |
| UNE 51601:1981 | Identical |
| DIN 51519:1998-08 | Corresponds |
| NEN ISO 3448 : 1977 | Identical |
| ISO 7745:2010 | Hydraulic fluid power — Fire-resistant (FR) fluids — Requirements and guidelines for use |
| ISO 6743-0:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 0: General |
| BS ISO 4392-1:2002 | Hydraulic fluid power. Determination of characteristics of motors At constant low speed and constant pressure |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| ASTM D 2422 : 1997 : R2013 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| BS ISO 10770-1:2009 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for four-port directional flow-control valves |
| BS ISO 12922 : 99 AMD 13874 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| BS ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines Test for cold start simulation and hydraulic pulse durability |
| SAE MS1002_201710 | Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification |
| BS ISO 5782-2:1997 | Pnuematic fluid power. Compressed air filters Test methods to determine the main characteristics to be included in supplier\'s literature |
| 13/30250817 DC : 0 | BS ISO 6953-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR PRESSURE REGULATORS AND FILTER-REGULATORS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN LITERATURE FROM SUPPLIERS |
| 03/109881 DC : DRAFT JULY 2003 | ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE |
| BS ISO 11158:2009 | Lubricants, industrial oils and related products (class L). Family H (hydraulic systems). Specifications for categories HH, HL, HM, HV and HG |
| ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 7: Vibration fatigue test |
| 98/714983 DC : DRAFT SEP 1998 | ISO/CD 6149-4 - CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 4: EXTERNAL HEX AND INTERNAL HEX PORT PLUGS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| DIN ISO 6149-3:1996-11 | CONNECTIONS FOR FLUID POWER AND GENERAL USE - PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 3: LIGHT DUTY (L SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| ISO 6743-3:2003 | Lubricants, industrial oils and related products (class L) — Classification — Part 3: Family D (Compressors) |
| BS ISO 6743-15:2007 | Lubricants, industrial oils and related products (class L). Classification Family E (Internal combustion engine oils) |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| 10/30227442 DC : 0 | BS EN ISO 13710 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - RECIPROCATING POSITIVE DISPLACEMENT PUMPS |
| BS ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning. Specification Refrigerant 134a |
| ISO 6743-3A:1987 | Lubricants, industrial oils and related products (class L) — Classification — Part 3A: Family D (Compressors) |
| BS 7403-11:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for self-cleaning filters |
| BS ISO 15380:2016 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| API 677 : 2006 : R2016 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| PD CEN/TR 14489:2005 | Fire-resistant hydraulic fluids. Classification and specification. Guidelines on selection for the protection of safety, health and the environment |
| BS ISO 10770-3:2007 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for pressure control valves |
| 98/714984 DC : DRAFT SEP 1998 | ISO/CD 8434-3 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 3: O-RING FACE SEAL FITTINGS |
| BS ISO 3977-3:2004 | Gas turbines. Procurement Design requirements |
| DIN ISO 15380:2004-05 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HETG, HEPG, HEES AND HEPR |
| API 676 CHINESE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| 05/30075032 DC : DRAFT AUG 2005 | ISO 23181 - HYDRAULIC FLUID POWER - FILTER ELEMENTS - DETERMINATION OF RESISTANCE TO FLOW FATIGUE USING HIGH VISCOSITY FLUID |
| 00/715333 DC : 0 | ISO/CD 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS ISO 13357-2:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for dry oils |
| BS 6413-3.1:1988 | Lubricants, industrial oils and related products (class L). Classification for family D (compressors) Air compressors |
| 05/30125053 DC : DRAFT MAY 2005 | ISO 6301-2 - PNEUMATIC FLUID POWER - COMPRESSED AIR LUBRICANTS - PART 2: TEST METHODS TO DETERMINE THE MAIN CHARACTERISTICS TO BE INCLUDED IN THE SUPPLIERS LITERATURE |
| ASTM D 2422 : 1997 : R2007 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| ISO 28521:2009 | Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
| ISO 10770-2:2012 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 2: Test methods for three-port directional flow-control valves |
| API 616 REDLINE : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 6743-12:1989 | Lubricants, industrial oils and related products (class L) — Classification — Part 12: Family Q (Heat transfer fluids) |
| ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 9: Inlet and outlet anti-drain valve tests |
| ISO 4548-5:2013 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 5: Test for cold start simulation and hydraulic pulse durability |
| ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L) — Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications |
| ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| ISO 3977-3:2004 | Gas turbines — Procurement — Part 3: Design requirements |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| ASTM D 2422 : 1997 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| EN ISO 16090-1:2018 | Machine tools safety - Machining centres, Milling machines, Transfer machines - Part 1: Safety requirements (ISO 16090-1:2017) |
| ISO/TR 13593:1999 | Enclosed gear drives for industrial applications |
| ASTM D 7044 : 2015 : REDLINE | Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| BS EN ISO 12922:2012 | Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| BS EN ISO 6803:2017 | Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing |
| BS EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries. Steam turbines. Special-purpose applications |
| EN 1501-5:2011 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| DIN EN ISO 6803:2017-07 | RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
| ISO 6743-13:2002 | Lubricants, industrial oils and related products (class L) — Classification — Part 13: Family G (Slideways) |
| BS ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test for composite filter housings |
| CEI EN 61362 : 2013 | GUIDE TO SPECIFICATION OF HYDRAULIC TURBINE GOVERNING SYSTEMS |
| 05/30098184 DC : DRAFT MAY 2005 | ISO 8068 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY T (TURBINES) - SPECIFICATIONS FOR LUBRICATING OILS FOR TURBINES |
| BS 7403-9:1995 | Full-flow lubricating oil filters for internal combustion engines Method of test for inlet and outlet anti-drain valves |
| BS ISO 10050:2005 | Lubricants, industrial oils and related products (class L). Family T (Turbines). Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 12167-1:2016 | Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves |
| API 687 : 2001 : R2009 | ROTOR REPAIR |
| 09/30202316 DC : 0 | BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES |
| BS 7403-4:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for initial particle retention efficiency, life and cumulative efficiency (gravimetric method) |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| SAE J2337/3_201701 | Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 3: Port Plug Requirements, Dimensions, Design, and Test Methods |
| 00/707842 DC : DRAFT APR 2000 | ISO/CD 17559 - HYDRAULIC FLUID POWER - TEST METHOD FOR ELECTRICITY CONTROLLED OIL HYDRAULIC PUMPS |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| 08/30168621 DC : DRAFT JAN 2008 | BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
| 17/30342184 DC : 0 | BS ISO 6743-6 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 6: FAMILY C (GEAR SYSTEMS) |
| API 674 : 2010 : INC : ERR 1 : 2015 : R2016 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings |
| BS 6347-1:1983 | Performance assessment of agricultural tractors Methods for determination of available power |
| BS ISO/TS 12927:1999 | Lubricants, industrial oils and related products (class L). Family M (metalworking). Guidelines for establishing specifications |
| 01/707860 DC : DRAFT MAY 2001 | ISO/DIS 14830-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - TRIBOLOGY-BASED MONITORING AND DIAGNOSTICS - PART 1: GENERAL GUIDELINES |
| BS ISO 8426:2008 | Hydraulic fluid power. Positive displacement pumps and motors. Determination of derived capacity |
| ISO 6743-15:2007 | Lubricants, industrial oils and related products (class L) — Classification — Part 15: Family E (Internal combustion engine oils) |
| BS ISO 4548-9:2008 | Methods of test for full-flow lubricating oil filters for internal combustion engines Inlet and outlet anti-drain valve tests |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| 14/30279043 DC : 0 | BS ISO 4548-14 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 14: COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY FOR COMPOSITE FILTER HOUSINGS |
| API 677 :2006 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| 96/706683 DC : MAY 96 | ISO 13707 RECIPROCATING COMPRESSORS FOR THE PETROLEUM AND GAS INDUSTRIES |
| BS EN 61221:2004 | Petroleum products and lubricants. Triaryl phosphate ester turbine control fluids (category ISO-L-TCD). Specifications |
| BS 7403-2:1998 | Full-flow lubricating oil filters for internal combustion engines Method of test for element by-pass valve characteristics |
| SAE J1754/2_201510 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced -Part 2: Ordering Information |
| 04/30096361 DC : DRAFT APR 2004 | ISO/DIS 15242-3 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL DOUBLE-ROW SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
| BS ISO 4548-7:2012 | Methods of test for full-flow lubricating oil filters for internal combustion engines Vibration fatigue test |
| 12/30241609 DC : 0 | BS ISO 4548-15 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 15: VIBRATION FATIGUE TEST WITH COMPOSITE MATERIALS |
| 12/30171803 DC : 0 | BS ISO 4548-5 - FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 5: METHOD OF TEST FOR COLD START SIMULATION AND HYDRAULIC PULSE DURABILITY |
| BS ISO 17559:2003 | Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics |
| SAE J1754/1_201707 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document |
| EEMUA 151 : 1987 | LIQUID RING VACUUM PUMPS AND COMPRESSORS |
| API 672 : 2004 | PACKAGED, INTEGRALLY GEARED CENTRIFUGAL AIR COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 6743-2:1981 | Lubricants, industrial oils and related products (class L) — Classification — Part 2: Family F (Spindle bearings, bearings and associated clutches) |
| ISO 12131-1:2001 | Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 1: Calculation of thrust pad bearings |
| API 674 : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 674 : 2010 : ERR 1 : 2014 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| ISO 6743-11:1990 | Lubricants, industrial oils and related products (class L) — Classification — Part 11: Family P (Pneumatic tools) |
| ISO/TR 3498:1986 | Lubricants, industrial oils and related products (class L) — Recommendations for the choice of lubricants for machine tools |
| DIN ISO 1219-2:1996-11 | FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| ISO/TS 11366:2011 | Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| ISO 12130-1:2001 | Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 1: Calculation of tilting pad thrust bearings |
| EN ISO 19353:2016 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) |
| SAE MS1004_201710 | Lubricants, Industrial Oils, and Related Products Type H (Hydraulic Fluids) - Specification |
| SAE J1754/3_201510 | Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information |
| ISO 19353:2015 | Safety of machinery — Fire prevention and fire protection |
| SAE MS1005_201708 | Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids—Specification |
| DIN EN ISO 12922:2013-04 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| DIN ISO 15242-1:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS (ISO 15242-1:2004) |
| BS EN ISO 13709:2003 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN ISO 9974-1:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Threaded ports |
| BS ISO 17082:2004 | Pneumatic fluid power. Valves. Data to be included in supplier literature |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 15242-1:2015 | Rolling bearings — Measuring methods for vibration — Part 1: Fundamentals |
| ISO 19859:2016 | Gas turbine applications — Requirements for power generation |
| I.S. EN ISO 10440-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS |
| I.S. EN ISO 19879:2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| I.S. EN ISO 6803:2017 | RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
| I.S. EN ISO 6743-4:2015 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) (ISO 6743-4:2015) |
| BS 7959-1:2004 | Materials used for the control of liquid spillages Determination of sorbency |
| VDI 3802 Blatt 2:2012-03 | Air conditioning systems for factories - Capture of air pollutants at machine tools removing material |
| BS 4475:1975 | Specification for straight mineral lubricating oils |
| DIN ISO 6149-2:1996-11 | PORTS AND STUD ENDS WITH ISO 261 THREADS AND O-RING SEALING - PART 2: HEAVY DUTY (S SERIES) STUD ENDS - DIMENSIONS, DESIGN, TEST METHODS AND REQUIREMENTS |
| ISO 6743-7:1986 | Lubricants, industrial oils and related products (class L) — Classification — Part 7: Family M (Metalworking) |
| BS ISO 7902-1:2013 | Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings Calculation procedure |
| 01/714275 DC : 0 | ISO/DIS 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS 6413-4:1983 | Lubricants, industrial oils and related products (class L) Classification for family H (hydraulic systems) |
| 11/30218514 DC : 0 | BS ISO 4548-7 - METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 7: VIBRATION FATIGUE TEST |
| ISO 7241:2014 | Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
| BS ISO/OECD 789-10:2006 | Agricultural tractors. Test procedures Hydraulic power at tractor/implement interface |
| 01/714274 DC : 0 | ISO/DIS 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| 15/30310648 DC : 0 | BS ISO 15380 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HETG, HEPG, HEES AND HEPR |
| BS ISO 10770-2:2012 | Hydraulic fluid power. Electrically modulated hydraulic control valves Test methods for three-port directional flow-control valves |
| 07/30161712 DC : 0 | BS EN ISO 6803 - RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING |
| BS 7403-7:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for vibration fatigue |
| BS ISO 6743-99:2002 | Lubricants, industrial oils and related products (class L). Classification General |
| 14/30272245 DC : 0 | BS EN ISO 16090-1 - MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS |
| ISO 6743-8:1987 | Lubricants, industrial oils and related products (class L) — Classification — Part 8: Family R (Temporary protection against corrosion) |
| BS 6347-10:1997 | Performance assessment of agricultural tractors Method for determination of hydraulic power at tractor/implement interface |
| 14/30274816 DC : 0 | BS EN ISO 16089 - MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
| 04/30114086 DC : DRAFT JUL 2004 | EN ISO 10440-1 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS (OIL-FREE) |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| API 676 REDLINE : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| BS ISO 7902-2:1998 | Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings Functions used in the calculation procedure |
| 16/30317112 DC : 0 | BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW |
| NF EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
| 17/30341515 DC : 0 | BS ISO 12925-1 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY C (GEARS) - PART 1: SPECIFICATIONS FOR LUBRICANTS FOR ENCLOSED GEAR SYSTEMS |
| DIN ISO 13357-2:2008-09 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OILS |
| 05/30135263 DC : DRAFT JUN 2005 | ISO 1179-4 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 4: STUD ENDS FOR GENERAL USE ONLY WITH METAL-TO-METAL SEALING (TYPE B) |
| BS ISO 6281:2007 | Plain bearings. Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
| BS ISO 4392-2:2002 | Hydraulic fluid power. Determination of characteristics of motors Startability |
| BS ISO 6743-1:2002 | Lubricants, industrial oils and related products (class L). Classification Family A (Total loss systems) |
| BS 7403-5:1991 | Full-flow lubricating oil filters for internal combustion engines Method of test for cold start simulation and hydraulic pulse durability |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO/OECD 789-10:2006 | Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface |
| BS 7403-3:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for resistance to high differential pressure and to elevated temperature |
| API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ANSI B93.99M : 87(R2001) | HYDRAULIC FLUID POWER - SERVOVALVES - TEST METHODS |
| BS ISO 3968:2017 | Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow |
| ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L) — Classification — Part 5: Family T (Turbines) |
| ONORM EN ISO 19879 : 2010 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| API 613:2003 | SPECIAL PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| API 619 REDLINE : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| I.S. EN 61221:2004 | PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| ISO 6301-2:2006 | Pneumatic fluid power — Compressed-air lubricators — Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 789-2:2018 | Agricultural tractors — Test procedures — Part 2: Rear three-point linkage lifting capacity |
| DIN ISO 15242-3:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 3: RADIAL SPHERICAL AND TAPERED ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-3:2006 + COR. 1:2010) |
| ISO 16030:2001 | Pneumatic fluid power — Connections — Ports and stud ends |
| BS ISO 6301-2:1997 | Pneumatic fluid power. Compressed air lubricators Test methods to determine the main characteristics to be included in supplier\'s literature |
| BS EN ISO 16089:2015 | Machine tools. Safety. Stationary grinding machines |
| SAE MS1003/2_200401 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils – Specification - Addendum |
| I.S. EN 1501-5:2011 | REFUSE COLLECTION VEHICLES - GENERAL REQUIREMENTS AND SAFETY REQUIREMENTS - PART 5: LIFTING DEVICES FOR REFUSE COLLECTION VEHICLES |
| ISO/TS 12927:1999 | Lubricants, industrial oils and related products (class L) — Family M (Metalworking) — Guidelines for establishing specifications |
| ISO 23181:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using high viscosity fluid |
| ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 2: Refrigerant 134a |
| ISO 6953-2:2015 | Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers |
| ISO 12500-1:2007 | Filters for compressed air — Test methods — Part 1: Oil aerosols |
| ISO 6281:2007 | Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs |
| ISO 4392-2:2002 | Hydraulic fluid power — Determination of characteristics of motors — Part 2: Startability |
| IEC 61362:2012 | Guide to specification of hydraulic turbine governing systems |
| ISO 12925-1:2018 | Lubricants, industrial oils and related products (class L) — Family C (gears) — Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) — General requirements |
| ISO 5782-2:1997 | Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main characteristics to be included in supplier's literature |
| DIN EN ISO 6803:2015-10 (Draft) | RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING (ISO 6803:2017) |
| BS EN ISO 9974-3:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with metal-to-metal sealing (type B) |
| ISO 13631:2002 | Petroleum and natural gas industries — Packaged reciprocating gas compressors |
| API STD 612:2020 | Petroleum, Petrochemical, and Natural Gas Industries - Steam Turbines - Special-purpose Applications |
| EN ISO 2738:1999 | Sintered metal materials, excluding hardmetals - Permeable sintered metal materials - Determination of density, oil content and open porosity (ISO 2738:1999) |
| ISO 16902-1:2003 | Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps |
| 03/110806 DC : DRAFT JUNE 2003 | BS ISO 19879 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - TEST METHODS FOR HYDRAULIC FLUID POWER CONNECTIONS |
| 01/710913 DC : DRAFT JULY 2001 | ISO/DIS 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| ISO 12168-1:2001 | Plain bearings — Hydrostatic plain journal bearings without drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves |
| ISO 7902-1:2013 | Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 1: Calculation procedure |
| BS 7403-1:1998 | Full-flow lubricating oil filters for internal combustion engines Methods of test for differential pressure/flow characteristics |
| BS ISO 8068:2006 | Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines |
| 06/30150467 DC : DRAFT MAY 2006 | ISO 6803 - RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING |
| ISO 6743-99:2002 | Lubricants, industrial oils and related products (class L) — Classification — Part 99: General |
| 04/30022935 DC : DRAFT NOV 2004 | BS ISO 12500-1 - FILTERS FOR COMPRESSED AIR - METHODS OF TEST - PART 1: OIL AEROSOILS |
| DIN EN 1501-5:2012-02 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| 17/30325994 DC : 0 | BS ISO 4409 - HYDRAULIC FLUID POWER - POSITIVE-DISPLACEMENT PUMPS, MOTORS AND INTEGRAL TRANSMISSIONS - METHODS OF TESTING AND PRESENTING BASIC STEADY STATE PERFORMANCE |
| BS EN 1501-5:2011 | Refuse collection vehicles. General requirements and safety requirements Lifting devices for refuse collection vehicles |
| I.S. EN ISO 16090-1:2018 | MACHINE TOOLS SAFETY - MACHINING CENTRES, MILLING MACHINES, TRANSFER MACHINES - PART 1: SAFETY REQUIREMENTS (ISO 16090-1:2017) |
| ISO 16860:2005 | Hydraulic fluid power — Filters — Test method for differential pressure devices |
| BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
| DIN ISO 16030:2007-05 | Pneumatic fluid power - Connections - Ports and stud ends (ISO 16030:2001 + Amd. 1:2005) |
| BS ISO 7241:2014 | Hydraulic fluid power. Dimensions and requirements of quick-action couplings |
| BS ISO 6743-3:2003 | Lubricants, industrial oils and related products (class L). Classification Family D (Compressors) |
| BS ISO 16860:2005 | Hydraulic fluid power. Filters. Test method for differential pressure devices |
| BS 6347-2:1983 | Performance assessment of agricultural tractors Methods for determination of hydraulic power and lifting capacity |
| BS ISO 13357-1:2017 | Petroleum products. Determination of the filterability of lubricating oils Procedure for oils in the presence of water |
| ISO 6743-1:2002 | Lubricants, industrial oils and related products (class L) — Classification — Part 1: Family A (Total loss systems) |
| BS ISO 6953-2:2015 | Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics to be included in literature from suppliers |
| 13/30252560 DC : 0 | BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| 09/30207718 DC : 0 | BS ISO 7745 - HYDRAULIC FLUID POWER - FIRE-RESISTANT (FR) FLUIDS - GUIDELINES FOR USE |
| SAE MS1006_201803 | Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches - Specification |
| 09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| DIN ISO 13357-1:2009-04 | PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| 15/30316146 DC : 0 | BS ISO 13357-1 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 1: PROCEDURE FOR OILS IN THE PRESENCE OF WATER |
| DIN ISO 15242-2:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-2:2004 + COR. 1:2010) |
| 11/30240403 DC : 0 | BS ISO 10770-2 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 2: TEST METHODS FOR THREE-WAY DIRECTIONAL FLOW CONTROL VALVES |
| CGSB 3-GP-36MB : 1990 | PETROLEUM HYDRAULIC FLUID, INHIBITED |
| 10/30235040 DC : 0 | BS EN 61362 ED.2 - GUIDE TO SPECIFICATION OF HYDRAULIC TURBINE GOVERNING SYSTEMS |
| 04/30127167 DC : DRAFT DEC 2004 | ISO 6743-15 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 15: FAMILY E (INTERNAL COMBUSTION ENGINE OILS) |
| 17/30310616 DC : DRAFT JAN 2017 | BS ISO 789-2 - AGRICULTURAL TRACTORS - TEST PROCEDURES - PART 2 - REAR THREE-POINT LINKAGE LIFTING CAPACITY |
| BS EN 61362:2012 | Guide to specification of hydraulic turbine governing systems |
| BS ISO 6803 : 1994 AMD 9707 | RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING |
| 02/705659 DC : DRAFT APR 2002 | ISO/DIS 21049 - PUMPS - SHAFT SEALING SYSTEMS FOR CENTRIFUGAL AND ROTARY PUMPS |
| NF ISO 10770-1 : 2009 | HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-PORT DIRECTIONAL FLOW-CONTROL VALVES |
| API 675 : 2012 | POSITIVE DISPLACEMENT PUMPS - CONTROLLED VOLUME FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 674 : 2010(R2016) | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| BS 7198-2:1989 | Hydraulic fluid power quick-action couplings Methods of test |
| BS EN ISO 19353:2016 | Safety of machinery. Fire prevention and fire protection |
| BS ISO 7241-2:2000 | Hydraulic fluid power. Quick-action couplings Test methods |
| ISO 6743-14:1994 | Lubricants, industrial oils and related products (class L) — Classification — Part 14: Family U (Heat treatment) |
| 04/30092197 DC : DRAFT MARCH 2004 | BS 7959-1 - MATERIALS USED FOR THE CONTROL OF LIQUID SPILLAGES - PART 1 - DETERMINATION OF SORBENCY |
| 06/30140321 DC : DRAFT JULY 2006 | ISO 15242-4 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
| SAE J2551_201309 | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| API 677 : 2006 : R2010 | GENERAL-PURPOSE GEAR UNITS FOR PETROLEUM, CHEMICAL AND GAS INDUSTRY SERVICES |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| SAE MS1010_201212 | Lubricants, Industrial Oils, and Related Products Type T Turbine Oils - Specification |
| API STD 676 : 2009 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| SAE J747_201711 | Control Valve Test Procedure |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| API 674 : 2010 : ERR 2 : 2015 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| API 687 : 2001 | ROTOR REPAIR |
| API 610 REDLINE : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 673 : 2014 | CENTRIFUGAL FANS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| API 676 : 2009 : R2015 | POSITIVE DISPLACEMENT PUMPS - ROTARY |
| SAE J2337/1_201406 | Connections for Fluid Power and High Pressure Use—Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing—Part 1: Ports with Recessed Conical Seat Requirements, Dimensions, Design, and Test Methods |
| I.S. EN 61362:2012 | GUIDE TO SPECIFICATION OF HYDRAULIC TURBINE GOVERNING SYSTEMS (IEC 61362:2012 (EQV)) |
| SAE MS1003_201803 | Lubricants, Industrial Oils, and Related Products Type D Compressor Oils - Specification |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| ISO 8426:2008 | Hydraulic fluid power — Positive displacement pumps and motors — Determination of derived capacity |
| ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
| DIN ISO 15242-4:2014-06 | ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 4: RADIAL CYLINDRICAL ROLLER BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE (ISO 15242-4:2007) |
| I.S. CEN/TR 14489:2005 | FIRE-RESISTANT HYDRAULIC FLUIDS - CLASSIFICATION AND SPECIFICATION - GUIDELINES ON SELECTION FOR THE PROTECTION OF SAFETY, HEALTH AND THE ENVIRONMENT |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| ISO 10050:2005 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD) |
| ISO 4392-1:2002 | Hydraulic fluid power — Determination of characteristics of motors — Part 1: At constant low speed and constant pressure |
| ISO 17559:2003 | Hydraulic fluid power — Electrically controlled hydraulic pumps — Test methods to determine performance characteristics |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| I.S. EN ISO 13709:2009 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| DIN EN ISO 6743-4:2015-11 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) (ISO 6743-4:2015) |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) — Classification — Part 4: Family H (Hydraulic systems) |
| BS EN ISO 10440-1:2001 | Petroleum and natural gas industries. Rotary-type positive-displacement compressors Process compressors (oil-free) |
| ISO 2738:1999 | Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity |
| ISO 7241-2:2000 | Hydraulic fluid power — Quick-action couplings — Part 2: Test methods |
| BS EN ISO 20763:2004 | Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method |
| ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
| ISO 13710:2004 | Petroleum, petrochemical and natural gas industries — Reciprocating positive displacement pumps |
| BS EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L). Classification Family H (Hydraulic systems) |
| 15/30320322 DC : 0 | BS ISO 15242-1 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 1: FUNDAMENTALS |
| ISO 9974-3:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B) |
| I.S. EN ISO 12922:2012 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR HYDRAULIC FLUIDS IN CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU (ISO 12922:2012) |
| IEC 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| BS EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries. Reciprocating positive displacement pumps |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 9974-2:1996 | Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 2: Stud ends with elastomeric sealing (type E) |
| ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
| BS ISO 15242-1:2015 | Rolling bearings. Measuring methods for vibration Fundamentals |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| 08/30187364 DC : DRAFT JULY 2008 | BS ISO 11366 - PETROLEUM AND RELATED PRODUCTS - GUIDANCE FOR IN-SERVICE MONITORING OF LUBRICATING OILS FOR STEAM, GAS AND COMBINED-CYCLE TURBINES |
| BS ISO 3724:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant |
| ISO 19879:2010 | Metallic tube connections for fluid power and general use — Test methods for hydraulic fluid power connections |
| CEN/TR 14489:2005 | Fire-resistant hydraulic fluids - Classification and specification - Guidelines on selection for the protection of safety, health and the environment |
| DIN EN ISO 20763:2004-10 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| EN ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries (ISO 13709:2009) |
| EN ISO 10437:2003 | Petroleum, petrochemical and natural gas industries - Steam turbines - Special-purpose applications (ISO 10437:2003) |
| EN ISO 20763:2004 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN ISO 9974-2:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 2: Stud ends with elastomeric sealing (type E) (ISO 9974-2:1996) |
| EN ISO 13631:2002 | Petroleum and natural gas industries - Packaged reciprocating gas compressors (ISO 13631:2002) |
| EN ISO 6803:2017 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
| EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) |
| EN ISO 16089:2015 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| EN ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries - Rotary-type positive-displacement compressors - Part 1: Process compressors (ISO 10440-1:2007) |
| EN ISO 13710:2004 | Petroleum, petrochemical and natural gas industries - Reciprocating positive displacement pumps (ISO 13710:2004) |
| EN ISO 9974-3:2000 | Connections for general use and fluid power - Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing - Part 3: Stud ends with metal-to-metal sealing (type B) (ISO 9974-3:1996) |
| EN 61362:2012 | Guide to specification of hydraulic turbine governing systems |
| 07/30144935 DC : 0 | BS ISO 6532 - MACHINERY FOR FORESTRY - PORTABLE CHAIN-SAWS - TECHNICAL DATA |
| BS ISO 7745:2010 | Hydraulic fluid power. Fire-resistant FR) fluids. Requirements and guidelines for use |
| 05/30098181 DC : DRAFT MAY 2005 | ISO 6743-5 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 5: FAMILY T (TURBINES) |
| ISO 19378:2003 | Lubricants, industrial oils and related products (class L) — Machine-tool lubricants — Categories and specifications |
| 02/122677 DC : DRAFT JUN 2002 | ISO/DIS 20763 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD |
| ISO 7902-2:1998 | Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure |
| BS 6413-3.2:1989 | Lubricants, industrial oils and related products (class L). Classification for family D (compressors) Gas and refrigeration compressors |
| BS ISO 16030:2001 | Pneumatic fluid power. Connections. Ports and stud ends |
| 15/30316149 DC : 0 | BS ISO 13357-2 - PETROLEUM PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PART 2: PROCEDURE FOR DRY OIL |
| BS ISO 4548-14:2016 | Methods of test for full-flow lubricating oil filters for internal combustion engines Cold start simulation and hydraulic pulse durability for composite filter housings |
| ISO 6743-6:2018 | Lubricants, industrial oils and related products (class L) — Classification — Part 6: Family C (gear systems) |
| NFPA T3.5.14 : 2009 : R2014 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| BS 6413-8:1988 | Lubricants, industrial oils and related products (class L) Classification for family R (temporary protection against corrosion) |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| NFPA T2.13.13 : 2002 : R2015 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS |
| DIN ISO 6743-99:2012-12 | Lubricants, industrial oils and related products (class L) - Classification - Part 99: General (ISO 6743-99:2002) |
| 01/714273 DC : 0 | ISO/DIS 1179-2 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| BS 6277:1982 | Method for determination of pressure drop/flow characteristics of hydraulic fluid power filters |
| 15/30293226 DC : 0 | BS ISO 19349 - PLAIN BEARINGS - LUBRICATION AND CONTROL |
| ASTM D 2422 : 1997 : R2002 | Standard Classification of Industrial Fluid Lubricants by Viscosity System |
| 13/30259613 DC : 0 | BS EN ISO 6743-4 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) |
| API 674 REDLINE : 2010 | POSITIVE DISPLACEMENT PUMPS - RECIPROCATING |
| 06/30128779 DC : DRAFT AUG 2006 | ISO 8426 - HYDRAULIC FLUID POWER. POSITIVE DISPLACEMENT PUMPS AND MOTORS - DETERMINATION OF DERIVED CAPACITY |
| 01/206865 DC : DRAFT SEP 2001 | IEC 61221 ED.2 - PETROLEUM PRODUCTS AND LUBRICANTS - TRIARYL PHOSPHATE ESTER TURBINE CONTROL FLUIDS (CATEGORY ISO-L-TCD) - SPECIFICATIONS |
| SAE MS1007_201204 | Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification |
| 08/30178054 DC : DRAFT FEB 2008 | BS EN ISO 12922 - LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - FAMILY H (HYDRAULIC SYSTEMS) - SPECIFICATIONS FOR CATEGORIES HFAE, HFAS, HFB, HFC, HFDR AND HFDU |
| API 11PGT : 1992 | RECOMMENDED PRACTICE FOR PACKAGED COMBUSTION GAS TURBINES |
| ANSI B93.80M : 1987 | HYDRAULIC FLUID POWER FILTERS EVALUATION OF PRESSURE DROP VERSUS FLOW CHARACTERISTICS, |
| API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| 05/30129206 DC : DRAFT FEB 2005 | ISO/DIS 789-10 - AGRICULTURAL TRACTORS - TEST PROCEDURES - PART 10: HYDRAULIC POWER AT TRACTOR/IMPLEMENT INTERFACE |
| 15/30320325 DC : 0 | BS ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND OUTSIDE SURFACE |
| I.S. EN ISO 19353:2016 | SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015) |
| 09/30171555 DC : DRAFT SEP 2009 | BS EN ISO 10437 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| 15/30317693 DC : 0 | BS EN ISO 6803 - RUBBER OR PLASTICS HOSES AND HOSE ASSEMBLIES - HYDRAULIC-PRESSURE IMPULSE TEST WITHOUT FLEXING |
| BS ISO 6743-4 : 99 AMD 14102 | LUBRICANTS, INDUSTRIAL OILS AND RELATED PRODUCTS (CLASS L) - CLASSIFICATION - PART 4: FAMILY H (HYDRAULIC SYSTEMS) |
| DIN 51515-2:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 2: Turbine oils TG for high temperature service |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| DIN 51515-1:2010-02 | Lubricants and governor fluids for turbines - Minimum requirements - Part 1: Turbine oils TD for normal service |
| BS ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L). Classification Family T (turbines) |
| BS ISO 23181:2007 | Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using high viscosity fluid |
| ISO 4412-2:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 2: Motors |
| BS 6413-0:1983 | Lubricants, industrial oils and related products (class L) Classification (general) |
| BS ISO 19378:2003 | Lubricants, industrial oils and related products (class L). Machine-tool lubricants. Categories and specifications |
| BS ISO 16902-1:2003 | Hydraulic fluid power. Test code for the determination of sound power levels using sound intensity techniques. Engineering method Pumps |
| ISO 16089:2015 | Machine tools — Safety — Stationary grinding machines |
| 05/30135261 DC : DRAFT JUN 2005 | ISO 1179-3 - CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 3: LIGHT-DUTY (L SERIES) STUD ENDS WITH SEALING BY O-RING WITH RETAINING RING (TYPES G AND H) |
| NFPA T2.13.13 : 2002 : R2010 | RECOMMENDED PRACTICE - HYDRAULIC FLUID POWER - FLUIDS - VISCOSITY SELECTION CRITERIA FOR HYDRAULIC MOTORS AND PUMPS |
| 08/30171024 DC : DRAFT MAY 2008 | BS ISO 10770-1 - HYDRAULIC FLUID POWER - ELECTRICALLY MODULATED HYDRAULIC CONTROL VALVES - PART 1: TEST METHODS FOR FOUR-WAY DIRECTIONAL FLOW CONTROL VALVES |
| BS 2626:1975 | Specification for lubricating oils for refrigerant compressors |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| SAE MS1000_201302 | Lubricants, Industrial Oils, and Related Products - Classification |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| API 687 : 2001 : R2015 | ROTOR REPAIR |
| SAE MS1009_201207 | Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils - Specification |
| SAE J515_201511 | Specification for O-Ring Materials Used with Hydraulic Connectors |
| API 610 : 2010 | CENTRIFUGAL PUMPS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| SAE MS1011_201808 | Lubricants, Industrial Oils, and Related Products - Type X (Greases) - Specification |
| ISO 16090-1:2017 | Machine tools safety — Machining centres, Milling machines, Transfer machines — Part 1: Safety requirements |
| SAE J343_201712 | Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies |
| ISO 10770-3:2007 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 3: Test methods for pressure control valves |
| ISO 789-10:1996 | Agricultural tractors — Test procedures — Part 10: Hydraulic power at tractor/implement interface |
| ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| ASTM D 6224 : 2016 : REDLINE | Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment |
| ISO 4548-15:2014 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings |
| SAE J2337/2_201702 | Connections for Fluid Power and High Pressure Use - Ports, Stud Ends, and Plugs with ISO 261 Threads and O-Ring Sealing - Part 2: Stud End Requirements, Dimensions, Design, and Test Methods |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| NFPA T3.5.14 : 2009 | HYDRAULIC FLUID POWER - DIRECTIONAL CONTROL VALVE - METHOD FOR DETERMINING THE METERING CHARACTERISTICS |
| DIN EN ISO 16089:2016-06 | Machine tools - Safety - Stationary grinding machines (ISO 16089:2015) |
| I.S. EN ISO 16089:2015 | MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES (ISO/DIS 16089:2014) |
| BS 7275-2:1990 | Determination of hydraulic fluid power motor characteristics Method for startability |
| SAE MS1001_201708 | Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems - Specification |
| ISO 8068:2006 | Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines |
| ISO 10770-1:2009 | Hydraulic fluid power — Electrically modulated hydraulic control valves — Part 1: Test methods for four-port directional flow-control valves |
| DIN EN ISO 19879:2011-01 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| ISO 4412-1:1991 | Hydraulic fluid power — Test code for determination of airborne noise levels — Part 1: Pumps |
| ISO 12922:2012 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
| ISO 17082:2004 | Pneumatic fluid power — Valves — Data to be included in supplier literature |
| BS ISO 13691 : 2001 AMD 14307 | PETROLEUM AND NATURAL GAS INDUSTRIES - HIGH-SPEED SPECIAL-PURPOSE GEAR UNITS |
| BS EN ISO 13631:2002 | Petroleum and natural gas industries. Packaged reciprocating gas compressors |
| ISO 3724:2007 | Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant |
| DD ISO/TS 11366:2011 | Petroleum and related products. Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN ISO 9974-2:2000 | Connections for general use and fluid power. Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Stud ends with elastomeric sealing (type E) |
| BS EN ISO 2738:2000 | Sintered metal materials, excluding hardmetals. Permeable sintered metal materials. Determination of density, oil content and open porosity |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| BS EN ISO 19879:2010 | Metallic tube connections for fluid power and general use. Test methods for hydraulic fluid power connections |
| DIN EN ISO 19353:2016-07 | SAFETY OF MACHINERY - FIRE PREVENTION AND FIRE PROTECTION (ISO 19353:2015) |
| EN 61221:2004 | Petroleum products and lubricants - Triaryl phosphate ester turbine control fluids (category ISO-L-TCD) - Specifications |
| API 611:2008 INC ERR 2 : 2019 | General-purpose Steam Turbines for Petroleum, Chemical, and Gas Industry Services |
| API STD 541:2014(R2021) | Form-wound Squirrel-Cage Induction Motors-500 Horsepower and Larger, Fifth Edition |
| UNE-EN ISO 12922:2013 | Lubricants, industrial oils and related products (class L) - Family H (Hydraulic systems) - Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU (ISO 12922:2012) |
| UNE-EN 61362:2013 | Guide to specification of hydraulic turbine governing systems |
| UNE-EN ISO 19879:2010 | Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2010) |
| UNE-EN 1501-5:2012 | Refuse collection vehicles - General requirements and safety requirements - Part 5: Lifting devices for refuse collection vehicles |
| UNE-EN ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) |
| BS 2000-448.2(1999) : 1999 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - DETERMINATION OF THE FILTERABILITY OF LUBRICATING OILS - PROCEDURE FOR DRY OILS |
| UNE-EN ISO 6803:2017 | Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2017) |
| UNE-EN ISO 19353:2016 | Safety of machinery - Fire prevention and fire protection (ISO 19353:2015) |
| NFPA T3.5.30 : 2008 : (R2018) | HYDRAULIC FLUID POWER - SOLENOID OPERATED DIRECTIONAL CONTROL VALVES - MEASUREMENT OF RESPONSE TIME |
| NFPA T3.5.24 : 2001 : R2016 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| CEI EN IEC 61362:2024-12 | Guidelines to specification of hydraulic turbine governing systems |
| NFPA T3.5.24 : 2001 : R2011 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| NFPA T3.5.24 : 2001 : R2006 | HYDRAULIC FLUID POWER - PRESSURE RELIEF VALVES - METHOD OF TESTING AND PRESENTING BASIC PERFORMANCE DATA |
| SAE J2321_200212 | Ship Systems and Equipment—General Specification for Filter Elements—Hydraulic and Lube Oil Service |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.