ISO 3231:1993
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English, French
Published date
21-01-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.
The principle of the procedure specified is to expose a coated test panel to specified humid atmospheres containing sulfur dioxide. A volume of 0,2 litre, measured at atmospheric pressure, is generally recommended for testing coatings of thickness not exceeding approximately 40 µm. The effects of exposure are evaluated by criteria agreed in advance between the interested parties, these criteria being usually of a subjective nature. Applies to single-coat film or a multi-coat system of paints.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN ISO 3231 : 1998 | Identical |
| NBN ISO 3231 : 2ED 94 | Identical |
| NBN EN ISO 3231 : 1998 | Identical |
| NEN EN ISO 3231 : 1997 | Identical |
| NS EN ISO 3231 : 1ED 1998 | Identical |
| I.S. EN ISO 3231:1998 | Identical |
| PN EN ISO 3231 : 2000 | Identical |
| SN EN ISO 3231 : 1998 | Identical |
| UNI ISO 3231 : 1996 | Identical |
| UNI EN ISO 3231 : 1999 | Identical |
| SS-EN ISO 3231:1998 | Identical |
| UNE-EN ISO 3231:1998 | Identical |
| BS EN ISO 3231:1998 | Identical |
| EN ISO 3231:1997 | Identical |
| DIN EN ISO 3231:1998-02 | Identical |
| BS 3900-F8(1993) : 1993 AMD 9930 | Identical |
| PNE-prEN ISO 3231 | Identical |
| PNE 48290 | Identical |
| BS ISO/TS 12928:1999 | Lubricants, industrial oils and related products (class L). Family R (products for temporary protection against corrosion). Guidelines for establishing specifications |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| PREN 1442 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 08/30194268 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| BS EN 62271-203:2012 | High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| PREN 14140 : DRAFT 2012 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| EN 60950-22:2017 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| BS EN 12206-1:2004 | Paints and varnishes. Coating of aluminium and aluminium alloys for architectural purposes Coatings prepared from coating powder |
| UNE-EN 62271-203:2013 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| 11/30253145 DC : 0 | BS EN 62271-202 ED2 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| BS EN 62271-202:2014 | High-voltage switchgear and controlgear High-voltage/low-voltage prefabricated substation |
| EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| EN 62271-202:2014/AC:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION (IEC 62271-202:2014) |
| EN 13438:2013 | Paints and varnishes - Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| NF EN 50483-6 : 2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| BS EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories Environmental testing |
| NF EN 61869-1 : 2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| 14/30300966 DC : 0 | BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| EN 12206-1:2004 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| I.S. EN 62271-203:2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV)) |
| 14/30291744 DC : 0 | BS EN 13523-23 - COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| BIS IS/IEC 62271-203 : 2003 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
| BIS IS 13252-22 : 2014 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| I.S. EN 62271-202:2014 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 202: HIGH-VOLTAGE/LOW-VOLTAGE PREFABRICATED SUBSTATION |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| DIN EN 1442:2008-04 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DIN EN 13438:2013-12 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| I.S. EN 13523-23:2015 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| DIN EN 12206-1:2004-09 | Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1: Coatings prepared from coating powder |
| I.S. EN 10245-4:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| I.S. EN 14140:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| I.S. EN 1442:2017 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 13438:2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDISED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 15434:2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| VDI 3823 Blatt 4:2006-11 | Vacuum coating quality assurance - Testing of vacuum coated plastics |
| 17/30347375 DC : 0 | BS EN 62368-1 ED 3.0 - AUDIO/VIDEO; INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT - PART 1: SAFETY REQUIREMENTS |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| 08/30179468 DC : DRAFT MAR 2008 | BS EN 62271-203 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
| 15/30297966 DC : 0 | BS EN 60950-22/ED2 - INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| PD ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| 12/30248681 DC : 0 | BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| 03/103069 DC : DRAFT JAN 2003 | |
| 97/107906 DC : DRAFT DEC 1997 | PREN 13022-1 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 1: ACTIONS, REQUIREMENTS AND TERMINOLOGY |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UL 60950-22:2ED 2017-03-31 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
| I.S. EN 50483-6:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| PREN 13523-23 : DRAFT 2014 | COIL COATED METALS - TEST METHODS - PART 23: RESISTANCE TO HUMID ATMOSPHERES CONTAINING SULFUR DIOXIDE |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| DIN EN 14140:2015-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNE-EN 62271-202:2015 | High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation |
| IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| UNE-EN 61869-1:2010 | Instrument transformers -- Part 1: General requirements |
| UNI EN 15434 : 2010 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| UNI EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNI EN 13438 : 2013 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR HOT DIP GALVANISED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| UNI EN 14140 : 2015 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| UNI EN 10245-4 : 2011 | Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires |
| ONORM EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| I.S. EN 61869-1:2009 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| PREN 13438 : DRAFT 2012 | PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| 04/30125747 DC : DRAFT NOV 2004 | IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| 08/30180844 DC : DRAFT JUNE 2008 | BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE |
| BS EN 60950-22:2017 | Information technology equipment. Safety Equipment to be installed outdoors |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| I.S. EN 60950-22:2017 | INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 22: EQUIPMENT TO BE INSTALLED OUTDOORS |
| CSA C61869-1 : 2014 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13523-23:2015-09 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| DIN EN 10245-4:2012-01 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011 |
| UNE-EN 14140:2015 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction |
| IEC 62271-203:2011 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| BS EN 14140:2014 | LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction |
| BS EN 15434 : 2006 | GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS) |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| UNE-EN 10245-4:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| IEC 60950-22:2016 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| DIN EN 15434:2010-07 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010) |
| BS EN 10245-4:2011 | Steel wire and wire products. Organic coatings on steel wire Polyester coated wire |
| IEC 62271-202:2014 | High-voltage switchgear and controlgear - Part 202: High-voltage/ low-voltage prefabricated substation |
| UNE-EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| BS EN 13438:2013 | Paints and varnishes. Powder organic coatings for hot dip galvanised or sherardised steel products for construction purposes |
| BS EN 1442 : 2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| UNE-EN 13523-23:2015 | Coil coated metals - Test methods - Part 23: Resistance to humid atmospheres containing sulfur dioxide |
| EN 1442:2017 | LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Design and construction |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 15434:2006+A1:2010 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN 10245-4:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire |
| BS EN 61869-1:2009 | Instrument transformers General requirements |
| 12/30238456 DC : 0 | BS EN 13438 - PAINTS AND VARNISHES - POWDER ORGANIC COATINGS FOR GALVANIZED OR SHERARDIZED STEEL PRODUCTS FOR CONSTRUCTION PURPOSES |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| CEI EN 62271-203 : 2013 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV |
| 03/100997 DC : DRAFT MAR 2003 | BS EN 13022-2 - GLASS IN BUILDING - STRUCTURAL SEALANT GLAZING - PART 2: PRODUCT STANDARD FOR ULTRA-VIOLET RESISTANT SEALANT AND STRUCTURAL SEALANT |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| NF EN 50300 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| CEI EN 50483-6 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| CEI EN 61869-1 : 2010 | INSTRUMENT TRANSFORMERS - PART 1: GENERAL REQUIREMENTS |
| IEC 61869-1:2007 | Instrument transformers - Part 1: General requirements |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| BS EN 13523-23:2015 | Coil coated metals. Test methods Resistance to humid atmospheres containing sulfur dioxide |
| EN 61869-1:2009 | Instrument transformers - Part 1: General requirements |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| EN 62271-203:2012 | High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
| DIN EN 14140:2017-01 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| IEC 60950-22:2016 RLV | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors |
| EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| UNE-EN 15434:2007 | Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) |
| CAN/CSA-C22.2 NO. 60950-22:17 | Information technology equipment - Safety - Part 22: Equipment to be installed outdoors (Binational standard with UL 60950-22) |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 1512:1991 | Paints and varnishes Sampling of products in liquid or paste form |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN 21512:1994/AC:1994 | PAINTS AND VARNISHES - SAMPLING OF PRODUCTS IN LIQUID OR PASTE FORM |
| EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
| ISO 4628-3:2016 | Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting |
| EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| EN ISO 3696:1995 | Water for analytical laboratory use - Specification and test methods (ISO 3696:1987) |
| ISO 4628-2:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 2: Assessment of degree of blistering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.