ISO 3131:1975
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Wood — Determination of density for physical and mechanical tests
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
24-04-2019
Language(s)
English, French
Published date
01-11-1975
Important note : All end users must be registered with an Account prior to user licenses being assigned.
The method described determines the moisture content at the time of test and in the absolutely dry condition as well as the mass ratio in the absolutely dry condition to volume of the test piece with moisture content greater than or equal to the fibre saturation point.
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| Standards | Relationship |
| UNI ISO 3131 : 1985 | Identical |
| BS 373:1957 | Similar to |
| AS/NZS 1080.3:2000 | Identical |
| PD CEN/TS 16360:2012 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of film extensibility by indentation of a coating on a wooden substrate |
| 12/30263201 DC : 0 | BS EN 16449 - WOOD AND WOOD-BASED PRODUCTS - CALCULATION OF SEQUESTRATION OF ATMOSPHERIC CARBON DIOXIDE |
| PD CEN/TS 16498:2013 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of tannin staining |
| I.S. EN 28970:1991 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| BS 1990-1:1984 | Wood poles for overhead power and telecommunication lines Specification for softwood poles |
| BS EN 15737:2009 | Timber structures. Test methods. Torsional resistance of driving in screws |
| 10/30202133 DC : 0 | BS ISO 3129 - WOOD - SAMPLING METHODS AND GENERAL REQUIREMENTS FOR PHYSICAL AND MECHANICAL TESTING OF SMALL CLEAR WOOD SPECIMENS |
| DIN EN 15736:2009-12 | Timber structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
| 08/30186890 DC : DRAFT OCT 2008 | BS EN 12490 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
| S.R. CEN/TS 16360:2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
| UNI EN ISO 8970 : 2010 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| PREN 1383 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - PULL THROUGH RESISTANCE |
| I.S. EN ISO 12215-2:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| ISO 13061-2:2014 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests |
| UNI CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE |
| UNI EN 594 : 2011 | TIMBER STRUCTURES - TEST METHODS - RACKING STRENGTH AND STIFFNESS OF TIMBER FRAME WALL PANELS |
| BS EN 350-1:1994 | Durability of wood and wood-based products. Natural durability of solid wood Guide to the principles of testing and classification of natural durability of wood |
| BS EN 1380:2009 | Timber structures. Test methods. Load bearing nails, screws, dowels and bolts |
| BS EN 28970:1991 | Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density |
| DIN EN ISO 12215-2:2002-09 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLING - MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| CEN/TS 16498:2013 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of tannin staining |
| EN 12490:2010 | Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
| EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| 14/30297198 DC : 0 | BS EN 1383 - TIMBER STRUCTURES - TEST METHODS - PULL THROUGH RESISTANCE |
| ISO 8969:2011 | Timber structures Testing of punched metal plate fasteners and joints |
| UNI CEN/TS 16700 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| BS EN ISO 8970:2010 | Timber structures. Testing of joints made with mechanical fasteners. Requirements for wood density |
| S.R. CEN/TS 16700:2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF RESISTANCE TO IMPACT OF A COATING ON A WOODEN SUBSTRATE |
| UNI CEN/TS 16498 : 2014 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| BS ISO 3129:2012 | Wood. Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| 00/107880 DC : DRAFT NOV 2000 | PREN 384 - STRUCTURAL TIMBER - DETERMINATION OF CHARACTERISTIC VALUES OF MECHANICAL PROPERTIES |
| ISO 12215-2:2002 | Small craft — Hull construction and scantlings — Part 2: Materials: Core materials for sandwich construction, embedded materials |
| BS ISO 18333:2014 | Pallets for materials handling. Quality of new wooden components for flat pallets |
| UNI EN 15737 : 2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
| ISO 21581:2010 | Timber structures - Static and cyclic lateral load test methods for shear walls |
| I.S. EN 15737:2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
| ISO 3129:2012 | Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| DIN EN 1380:2009-07 | TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS |
| BS EN 12490:2010 | Durability of wood and wood-based products. Preservative-treated solid wood. Determination of the penetration and retention of creosote in treated wood |
| ONORM EN ISO 8970 : 2010 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| I.S. EN 1380:2009 | TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS |
| DIN EN ISO 12777-3:2003-06 | METHODS OF TEST FOR PALLET JOINTS - PART 3: DETERMINATION OF STRENGTH OF PALLET JOINTS |
| I.S. EN 594:2011 | TIMBER STRUCTURES - TEST METHODS - RACKING STRENGTH AND STIFFNESS OF TIMBER FRAME WALL PANELS |
| I.S. EN 12490:2010 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
| I.S. EN 12369-2:2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| UNI EN 12369-2 : 2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| BS 1892-1:1986 | Gymnasium equipment Specification of general requirements |
| ISO 22157-1:2004 | Bamboo Determination of physical and mechanical properties Part 1: Requirements |
| 14/30297195 DC : 0 | BS EN 1382 - TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS |
| PREN 12369-2 : DRAFT 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| ISO 10984-2:2009 | Timber structures Dowel-type fasteners Part 2: Determination of embedding strength |
| 09/30200047 DC : 0 | BS EN 12369-2 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| UNE-EN 15736:2010 | Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
| 09/30192433 DC : 0 | BS ISO 21581 - TIMBER STRUCTURES - STATIC AND CYCLIC LATERAL LOAD TEST METHOD FOR SHEAR WALLS |
| 17/30324716 DC : 0 | BS ISO 22157-1 - BAMBOO STRUCTURES - DETERMINATION OF PHYSICAL AND MECHANICAL PROPERTIES OF BAMBOO CULMS - PART 1: TEST METHODS |
| 14/30312373 DC : 0 | BS EN 350 - DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - TESTING AND CLASSIFICATION OF THE RESISTANCE TO BIOLOGICAL AGENTS, THE PERMEABILITY TO WATER AND THE PERFORMANCE OF WOOD AND WOOD-BASED MATERIALS |
| S.R. CEN/TS 16498:2013 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF TANNIN STAINING |
| ISO 8375:2017 | Timber structures — Glued laminated timber — Test methods for determination of physical and mechanical properties |
| UNI EN 15736 : 2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
| ISO 16598:2015 | Timber structures Structural classification for sawn timber |
| DIN EN 12490:2010-11 | Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood |
| DIN EN 594:2011-09 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| BS EN ISO 12777-3:2002 | Methods of test for pallet joints Determination of strength of pallet joints |
| UNE-EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| ISO 18333:2014 | Pallets for materials handling — Quality of new wooden components for flat pallets |
| UNI EN 12490 : 2010 | DURABILITY OF WOOD AND WOOD-BASED PRODUCTS - PRESERVATIVE-TREATED SOLID WOOD - DETERMINATION OF THE PENETRATION AND RETENTION OF CREOSOTE IN TREATED WOOD |
| UNI EN 1380 : 2009 | TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS |
| ISO 9087:1998 | Wood - Determination of nail and screw holding power under axial load application |
| 09/30195765 DC : 0 | BS ISO 8970 - TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| 07/30173621 DC : 0 | BS EN 15737 - TIMBER STRUCTURES - TEST METHODS - TORSIONAL STRENGTH AND RESISTANCE TO DRIVING OF SCREWS |
| 14/30297201 DC : 0 | BS EN 1381 - TIMBER STRUCTURES - TEST METHODS - LOAD BEARING STAPLED JOINTS |
| 09/30195729 DC : 0 | BS ISO 8969 - TIMBER STRUCTURES - TESTING OF PUNCHED METAL PLATE FASTERNERS AND JOINTS |
| 09/30191937 DC : 0 | BS ISO 20152-1 - TIMBER STRUCTURES - BOND PERFORMANCE OF ADHESIVES - PART 1: BASIC REQUIREMENTS |
| BS 5820:1979 | Methods of test for determination of certain physical and mechanical properties of timber in structural sizes |
| ISO 17754:2014 | Timber structures — Test methods — Torsional resistance of driving in screws |
| I.S. EN 15736:2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
| PREN 1381 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - LOAD BEARING STAPLED JOINTS |
| NF EN ISO 12215-2 : 2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 2: MATERIALS: CORE MATERIALS FOR SANDWICH CONSTRUCTION, EMBEDDED MATERIALS |
| PREN 1382 : DRAFT 2014 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF TIMBER FASTENERS |
| ISO 16670:2003 | Timber structures — Joints made with mechanical fasteners — Quasi-static reversed-cyclic test method |
| I.S. EN ISO 12215-3:2002 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 3: MATERIALS: STEEL, ALUMINIUM ALLOYS, WOOD, OTHER MATERIALS |
| ISO 12777-3:2002 | Methods of test for pallet joints — Part 3: Determination of strength of pallet joints |
| ISO 12777-2:2000 | Methods of test for pallet joints — Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples |
| BS EN ISO 12777-2:2000 | Methods of test for pallet joints Determination of withdrawal and head pull-through resistance of pallet nails and staples |
| ISO 8970:2010 | Timber structures Testing of joints made with mechanical fasteners Requirements for wood density |
| BS EN 12369-2:2011 | Wood-based panels. Characteristic values for structural design Plywood |
| EN ISO 8970:2010 | Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:2010) |
| UNE-EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN ISO 12777-2:2000 | Methods of test for pallet joints - Part 2: Determination of withdrawal and head pull-through resistance of pallet nails and staples (ISO 12777-2:2000) |
| EN 15737:2009 | Timber Structures - Test methods - Torsional resistance of driving in screws |
| EN 1380:2009 | Timber structures - Test methods - Load bearing nails, screws, dowels and bolts |
| EN 28970 : 1991 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| EN 15736:2009 | Timber Structures - Test methods - Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
| EN ISO 12777-3:2002 | Methods of test for pallet joints - Part 3: Determination of strength of pallet joints (ISO 12777-3:2002) |
| EN 350-1:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood |
| DIN EN 15737:2009-12 | Timber structures - Test methods - Torsional resistance of driving in screws |
| I.S. EN 12509:2002 | TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT |
| BS EN 15736:2009 | Timber structures. Test methods. Withdrawal capacity of punched metal plate fasteners in handling and erection of prefabricated trusses |
| UNE-EN 15737:2010 | Timber Structures - Test methods - Torsional resistance of driving in screws |
| PD CEN/TS 16700:2014 | Paints and varnishes. Coating materials and coating systems for exterior wood. Assessment of resistance to impact of a coating on a wooden substrate |
| 14/30304101 DC : 0 | BS EN 16784 - TIMBER STRUCTURES - TEST METHODS - DETERMINATION OF THE LONG TERM BEHAVIOUR OF COATED AND UNCOATED DOWEL-TYPE FASTENERS |
| 16/30303560 DC : 0 | BS ISO 19323 - TIMBER STRUCTURES - JOIST HANGERS - TEST METHODS |
| 06/30149615 DC : 0 | EN 1380 - TIMBER STRUCTURES - TEST METHODS - LOAD BEARING NAILS, SCREWS, DOWELS AND BOLTS |
| 08/30159962 DC : 0 | BS EN 384 - STRUCTURAL TIMBER - DETERMINATION OF CHARACTERISTIC VALUES OF MECHANICAL PROPERTIES AND DENSITY |
| 07/30152875 DC : 0 | BS EN 15736 - TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS |
| CEN/TS 16360:2012 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of film extensibility by indentation of a coating on a wooden substrate |
| DIN EN ISO 8970:2010-11 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| NF EN 15736 : 2009 | TIMBER STRUCTURES - TEST METHODS - WITHDRAWAL CAPACITY OF PUNCHED METAL PLATE FASTENERS IN HANDLING AND ERECTION OF PREFABRICATED TRUSSES |
| NF EN ISO 8970 : 2010 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| I.S. EN ISO 8970:2010 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| ISO 12215-3:2002 | Small craft — Hull construction and scantlings — Part 3: Materials: Steel, aluminium alloys, wood, other materials |
| BS EN ISO 12215-2:2002 | Small craft. Hull construction and scantlings Materials. Core materials for sandwich construction, embedded materials |
| NF EN 15737 : 2009 | TIMBER STRUCTURES - TEST METHODS - TORSIONAL RESISTANCE OF DRIVING IN SCREWS |
| EN ISO 12215-2:2002 | Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002) |
| EN ISO 12215-3:2002 | Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002) |
| BS EN ISO 12215-3:2002 | Small craft. Hull construction and scantlings Materials. Steel, aluminium alloys, wood, other materials |
| ISO 20152-1:2010 | Timber structures — Bond performance of adhesives — Part 1: Basic requirements |
| DIN EN 12369-2:2011-09 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| BS EN 12509:2001 | Timber poles for overhead lines. Test methods. Determination of modulus of elasticity, bending strength, density and moisture content |
| BS EN 594:2011 | Timber structures. Test methods. Racking strength and stiffness of timber frame wall panels |
| ONORM ONR CEN/TS 16360 : 2012 | PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - ASSESSMENT OF FILM EXTENSIBILITY BY INDENTATION OF A COATING ON A WOODEN SUBSTRATE (CEN/TS 16360:2012) |
| EN 12509 : 2001 | TIMBER POLES FOR OVERHEAD LINES - TEST METHODS - DETERMINATION OF MODULUS OF ELASTICITY, BENDING STRENGTH, DENSITY AND MOISTURE CONTENT |
| CEN/TS 16700:2014 | Paints and varnishes - Coating materials and coating systems for exterior wood - Assessment of resistance to impact of a coating on a wooden substrate |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.