ISO 286-1:2010
Current
Current
The latest, up-to-date edition.
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
16-04-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 286-1:2010 establishes the ISO code system for tolerances to be used for linear sizes of features of the following types: a) cylinder; b) two parallel opposite surfaces.
ISO 286-1:2010 defines the basic concepts and the related terminology for this code system. It provides a standardized selection of tolerance classes for general purposes from amongst the numerous possibilities.
Additionally, it defines the basic terminology for fits between two features of size without constraints of orientation and location and explains the principles of basic hole and basic shaft.
| DevelopmentNote |
Supersedes ISO R 286 (04/2001) Supersedes ISO/DIS 286-1 and ISO 1829. (04/2010)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
|
| Standards | Relationship |
| NEN EN ISO 286-1 : 2010 C1 2013 | Identical |
| ONORM EN ISO 286-1 : 2014 | Identical |
| PN EN ISO 286-1 : 2011 AC 2016 | Identical |
| NEN-EN-ISO 286-1 : 2010 | Identical |
| I.S. EN ISO 286-1:2010/AC:2013 | Identical |
| DIN EN ISO 286-1:2010-11 | Identical |
| PN-EN ISO 286-1 : 2011 | Identical |
| BS EN ISO 286-1:2010 | Identical |
| UNE-EN ISO 286-1:2011 | Identical |
| BIS IS 919-1 : 2014 | Identical |
| NF EN ISO 286-1 : 2010 | Identical |
| NS EN ISO 286-1 : 2010 AC 2013 | Identical |
| SN EN ISO 286-1 : 2010 CORR 2013 | Identical |
| UNI EN ISO 286-1 : 2010 | Identical |
| NBN EN ISO 286-1 : 2010 COR 2013 | Identical |
| SS-EN ISO 286-1 : 2010 | Identical |
| SN EN ISO 286-1 : 2010 | Identical |
| JIS B 0401-1:2016 | Identical |
| PN EN 20286-1 : 1996 | Identical |
| BS 4500-1.1(1990) : AMD 7630 | Identical |
| BS EN 20286-1:1993 | Identical |
| UNI EN 20286-1 : 1995 | Identical |
| I.S. EN 20286-1:1994 | Identical |
| EN 20286-1 : 1993 | Identical |
| DIN ISO 286-1:1990-11 | Identical |
| NEN ISO 286-1 : 1989 C1 1994 | Identical |
| UNE-EN 20286-1:1996 | Identical |
| NS ISO 286-1 : 1988 | Identical |
| UNE-EN 60320-3:2015 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
| I.S. EN ISO 286-2:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010) |
| DIN ISO 8062:1998-08 | CASTINGS - SYSTEM OF DIMENSIONAL TOLERANCES AND MACHINING ALLOWANCES |
| UNE-EN 10088-5:2010 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| 15/30325929 DC : 0 | BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| 10/30234318 DC : DRAFT DEC 2010 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| BS ISO 8131:1992 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) compact series. Tolerances |
| BS ISO 14368-2:2003 | Mineral and sapphire watch-glasses Assembly to the case by adhesive or using a gasket |
| ISO 3764:2016 | Timekeeping instruments Movements Types, dimensions and nomenclature |
| I.S. EN 10045-1:1991 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| I.S. EN 61202-1:2017 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| BS ISO 3547-5:2007 | Plain bearings. Wrapped bushes Checking the outside diameter |
| BS 5983-3:1982 | Metric spherical plain bearings Specification for dimensions of spherical plain radial bearings, joint type, dimension series EW, bearings with extended inner ring |
| 02/614072 DC : DRAFT NOV 2002 | EN ISO 9409-1 - MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
| 04/104967 DC : DRAFT APR 2004 | ISO/DIS 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| 12/30250149 DC : 0 | BS ISO 16143-2 - STAINLESS STEELS FOR GENERAL PURPOSES - PART 2: SEMI-FINISHED PRODUCTS, BARS, RODS AND SECTIONS |
| BS ISO 8015:1985 | Technical drawings. Fundamental tolerancing principle |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| 05/30138267 DC : DRAFT AUG 2005 | EN 1426 - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| 15/30321493 DC : 0 | BS ISO 129-1 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
| 13/30286407 DC : 0 | BS ISO 10766 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSING DIMENSIONS FOR RECTANGULAR-SECTION-CUT BEARING RINGS FOR PISTONS AND RODS |
| BS ISO 11922-2:1997 | Thermoplastics pipes for the conveyance of fluids. Dimensions and tolerances Inch-based series |
| ISO 7789:2007 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities |
| 13/30263803 DC : 0 | BS ISO 17296-4 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 4: DATA PROCESSING |
| 03/109881 DC : DRAFT JULY 2003 | ISO 15242-2 - ROLLING BEARINGS - MEASURING METHODS FOR VIBRATION - PART 2: RADIAL BALL BEARINGS WITH CYLINDRICAL BORE AND CYLINDRICAL OUTSIDE SURFACE |
| BS ISO 3548-2:2009 | Plain bearings. Thin-walled half bearings with or without flange Measurement of wall thickness and flange thickness |
| BS EN ISO 14405-1:2010 | Geometrical product specifications (GPS). Dimensional tolerancing Linear sizes |
| CEI EN 62074-1 : 2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| BS EN 60603-1:2000 | Connectors for frequencies below 3 MHz for use with printed boards Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality |
| 06/30145675 DC : DRAFT SEP 2006 | ISO 12301 - PLAIN BEARINGS - QUALITY CONTROL TECHNIQUES AND INSPECTION OF GEOMETRICAL AND MATERIAL QUALITY CHARACTERISTICS |
| 08/30173839 DC : 0 | BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| NF EN ISO 286-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| BIS IS 6353 : 2014 | END MILLS WITH PARALLEL SHANK - SPECIFICATION |
| 17/30315891 DC : 0 | BS ISO 19690-2 - DISC SPRINGS - PART 2: TECHNICAL SPECIFICATIONS |
| 06/30146724 DC : 0 | EN 10277-1 - BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| BS ISO 10552:2014 | Timekeeping instruments. Crowns and sealed tubes. Designs and dimensions |
| BS EN 61978-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators Generic specification |
| CEI EN 60876-1 : 2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| 16/30323124 DC : 0 | BS ISO 20054 - PLAIN BEARINGS - BEARINGS CONTAINING DISPERSED SOLID LUBRICANTS |
| I.S. EN ISO 14405-1:2016 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO/DIS 14405-1:2013) |
| 00/715331 DC : 0 | ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| EN 61243-1:2005/A1:2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| 10/30234327 DC : DRAFT DEC 2010 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| 12/30262686 DC : 0 | BS EN ISO 2692 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) |
| BS EN ISO 8062-3:2007 | Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts General dimensional and geometrical tolerances and machining allowances for castings |
| I.S. EN ISO 14638:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| BS EN 50033:1991 | Specification for construction and testing of miners\' caplamps in relation to the risk of explosion, for mines susceptible to firedamp |
| 08/30184283 DC : DRAFT SEP 2008 | BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: TOP DEVICES FOR TOP EMPTYING AND FILLING OF LIQUID PRODUCTS |
| 03/106013 DC : DRAFT MAR 2003 | ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE |
| 08/30184289 DC : DRAFT SEP 2008 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| BS ISO 5408:2009 | Screw threads. Vocabulary |
| BS ISO 5145:2017 | Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| 08/30174605 DC : DRAFT SEP 2008 | BS ISO 5597 - HYDRAULIC FLUID POWER - CYLINDERS - HOUSINGS FOR SINGLE-ACTING PISTON AND ROD SEALS IN RECIPROCATING APPLICATIONS - DIMENSIONS AND TOLERANCES |
| BS QC010000(1993) : AMD 10432 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS. CONNECTORS FOR FREQUENCIES BELOW 3 MHz FOR USE WITH PRINTED BOARDS - GENERIC SPECIFICATION: GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| 93/710118 DC : 0 | PREN 3238 - AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS EXCEPT ALUMINIUM AND ALUMINIUM ALLOYS - SHEAR TEST FOR WIRES AND RIVETS |
| 08/30184169 DC : DRAFT JUNE 2008 | BS EN 61243-3 - LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| 07/30171301 DC : 0 | BS EN 3238 - AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
| ISO 6489-5:2011 | Agricultural vehicles Mechanical connections between towed and towing vehicles Part 5: Specifications for non-swivel clevis couplings |
| BIS IS 6352 : 2014 | SLOT DRILLS WITH PARALLEL SHANK - SPECIFICATION |
| EN 28167:1992 | Projections for resistance welding (8167:1989) |
| PREN 3238 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
| PREN 6072 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
| I.S. EN 62074-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| EN 62077:2016 | Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification |
| I.S. EN 60740-1:2005 | LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS |
| I.S. EN 61977:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
| I.S. EN 62077:2016 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
| I.S. CWA 14949:2004 | FUNSTEP AP-APPLICATION INTERPRETED MODEL, INCLUDING VALIDATION GUIDELINES |
| UNE-EN ISO 286-2:2011 | Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010) |
| I.S. EN ISO 14405-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| BS 2000-49(2000) : 2000 | METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| CEI EN 50033 : 1998 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLAMPS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| ISO 14649-10:2004 | Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 10: General process data |
| UNI EN 3238 : 2011 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
| ISO 3245:2015 | Rolling bearings — Needle roller bearings with drawn cup and without inner ring — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| ONORM EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION (ISO 15245-1:2001 + AMD 1:2013) |
| ISO 6195:2013 | Fluid power systems and components Cylinder-rod wiper-ring housings in reciprocating applications Dimensions and tolerances |
| ISO 3548-2:2009 | Plain bearings Thin-walled half bearings with or without flange Part 2: Measurement of wall thickness and flange thickness |
| UNE-EN ISO 14405-1:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2010) |
| ISO/TS 23768-1:2011 | Rolling bearings — Parts library — Part 1: Reference dictionary for rolling bearings |
| BS 2000-49(2007) : 2007 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| BS EN 61076-1:2006 | Connectors for electronic equipment. Product requirements Generic specification |
| NF ISO 1174-1 : 2011 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| BS ISO 22917:2016 | Precision superabrasives. Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| I.S. EN 10088-5:2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| UNE-EN ISO 14405-2:2015 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| I.S. EN ISO 1179-2:2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| ISO 7465:2007 | Passenger lifts and service lifts — Guide rails for lift cars and counterweights — T-type |
| DIN EN 12561-4:2011-10 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| UNE-EN 12561-4:2012 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| BS EN 12561-5:2011 | Railway applications. Tank wagons Devices for vapour return while filling or emptying of liquid products |
| UNE-EN 10272:2016 | Stainless steel bars for pressure purposes |
| IEC 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
| IEC 60320-3:2014 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
| BS EN ISO 4759-3:2000 | Tolerances for fasteners Plain washers for bolts, screws and nuts. Product grades A and C |
| BS EN 10272:2007 | Stainless steel bars for pressure purposes |
| BS EN ISO 2692:2014 | Geometrical product specifications (GPS). Geometrical tolerancing. Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| UNE-EN ISO 14405-1:2012 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010) |
| EN 62496-1:2009 | Optical circuit boards - Part 1: General |
| DIN ISO 22917:2017-11 | PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUNOUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016) |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 61243-3:2014/AC:2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| DIN ISO 8489-2:1997-05 | TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 2: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH HALF ANGLE OF 3 DEGREES 30 MINUTES |
| EN 61314-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
| EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| EN 60740-1:2005 | Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics |
| EN 50109-2-4:1995 | Hand crimping tools - Tools for the crimp termination of electric cables and wires for low frequency and radio frequency applications - Part 2-4: Particular requirements for centre contacts of RF connectors, series SMZ |
| EN ISO 14638:2015 | Geometrical product specifications (GPS) - Matrix model (ISO 14638:2015) |
| EN 10272:2016 | Stainless steel bars for pressure purposes |
| EN 10304:2001 | Magnetic materials (iron and steel) for use in relays |
| EN 61797-1:1996 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
| DIN ISO 8489-3:1997-05 | TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 3: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 4 DEGREES 20 MINUTES |
| EN 12561-6:2011 | Railway applications - Tank wagons - Part 6: Manholes |
| EN 175500:1997 | Sectional specification: Cable outlet accessories for connectors, including qualification approval and capability approval |
| EN 60874-1:2012 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 12561-5:2011 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| EN 60404-8-6:2017 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| NBR 16080 : 2013 | INTERNAL COMBUSTION ENGINES - CYLINDER LINERS ASSEMBLED IN THE BLOCK WITH OR WITHOUT CONTACT WITH THE COOLANT (WET AND DRY TYPE RESPECTIVELY) |
| ONORM EN ISO 1179-2 : 2014 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) (ISO 1179-2:2013) |
| OVE/ONORM EN 61243-3 : 2015 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE (IEC 61243-3:2014 + COR.1:2015) |
| ONORM EN ISO 293 : 2005 | PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| I.S. EN ISO 17296-3:2016 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS (ISO 17296-3:2014) |
| DIN SPEC 91184 E : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| DIN ISO 29262:2013-03 | Production equipment for microsystems - Interface between end effector and handling system (ISO 29262:2011) |
| BS ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxygenated fuels |
| BS ISO 17296-3 : 2014 | ADDITIVE MANUFACTURING - GENERAL PRINCIPLES - PART 3: MAIN CHARACTERISTICS AND CORRESPONDING TEST METHODS |
| 09/30197465 DC : 0 | BS ISO 6489-5 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS |
| 14/30279051 DC : 0 | BS EN ISO 15848-1 - INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES |
| CEI EN 62496-1 : 2010 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
| 10/30165662 DC : 0 | BS ISO 13706 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - AIRCOOLED HEAT EXCHANGERS |
| BS EN 60876-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic spatial switches Generic specification |
| 14/30304194 DC : 0 | BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTICFILTERS - GENERIC SPECIFICATION |
| BS ISO 29262:2011 | Production equipment for microsystems. Interface between end effector and handling system |
| BS EN ISO 148-1:2016 | Metallic materials. Charpy pendulum impact test Test method |
| 09/30203522 DC : 0 | BS ISO 1174-1 - ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| BS QC 880000-1(1995) : 1995 AMD 9689 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIBRE OPTIC FAN-OUTS - GENERIC SPECIFICATION |
| BS ISO 10285 : 2007 | ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
| BS EN 61202-1:2017 | Fibre optic interconnecting devices and passive components. Fibre optic isolators Generic specification |
| ISO 4401:2005 | Hydraulic fluid power — Four-port directional control valves — Mounting surfaces |
| BS ISO 13074:2012 | Analogue quartz clocks. Fitting dimensions of movements to hands |
| DIN CEN ISO/TS 8062-2;DIN SPEC 91184:2014-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013) |
| DIN ISO 3547-5:2015-12 | PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER (ISO 3547-5:2007) |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS EN 10088-5:2009 | Stainless steels Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| ISO 3765:1998 | Timekeeping instruments — Wristwatches — Dimensions of bracelet-to-case fastening elements |
| 96/704404 DC : 0 | ISO/DIS 9121 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - INTERNAL MICROMETERS WITH TWO-POINT CONTACT - DESIGN AND METROLOGICAL REQUIREMENTS |
| 99/710247 DC : DRAFT JUN 1999 | PREN 2003-2 - AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST |
| BS ISO 6621-1:2007 | Internal combustion engines. Piston rings Vocabulary |
| BS EN 61243-1 : 2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| 10/30234330 DC : DRAFT DEC 2010 | BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| PD CEN ISO/TS 8062-2:2013 | Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules |
| BS 4500-1.2(1990) : AMD 7631 | ISO LIMITS AND FITS - GENERAL, TOLERANCES AND DEVIATIONS - TABLES OF COMMONLY USED TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 16287:2005 | Plain bearings Thermoplastic bushes Dimensions and tolerances |
| BS ISO 14368-1:2000 | Mineral and sapphire watch-glasses Dimensions and tolerances |
| DIN EN ISO 148-1:2015-09 (Draft) | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| 13/30292791 DC : 0 | BS EN ISO 14405-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES |
| BS ISO 3601-2:2016 | Fluid power systems. O-rings Housing dimensions for general applications |
| UNE-EN ISO 148-1:2017 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| ISO 12301:2007 | Plain bearings — Quality control techniques and inspection of geometrical and material quality characteristics |
| 13/30271610 DC : 0 | BS ISO 17296-3 - ADDITIVE MANUFACTURING - RAPID TECHNOLOGIES (RAPID PROTOTYPING) - PART 3: TEST METHODS |
| 03/116547 DC : DRAFT NOV 2003 | EN ISO 15848-1 - INDUSTRIAL VALVES - FUGITIVE EMISSIONS - MEASUREMENT TEST AND QUALIFICATION PROCEDURES - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TEST OF VALVE ASSEMBLIES |
| 08/30161340 DC : DRAFT FEB 2008 | BS EN 60404-8-10 - MAGNETIC MATERIALS - PART 8: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SECTION 10: SPECIFICATIONS FOR MAGNETIC MATERIALS (IRON AND STEEL) FOR USE IN RELAYS |
| 14/30294680 DC : 0 | BS ISO 19259 - PLAIN BEARINGS - BEARINGS WITH EMBEDDED SOLID LUBRICANT |
| BS 6186-1:Addendum No. 1:1993 | Specification for straight cylindrical involute splines: metric module, side fit Inspection |
| 92/76647 DC : DRAFT MAY 1992 | PREN 2004-4 - AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 4: STRESS CORROSION TEST BY ALTERNATE IMMERSION FOR HIGH STRENGTH ALUMINIUM ALLOY WROUGHT PRODUCTS |
| UNI EN ISO 8062-3 : 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| BS ISO 14368-3:2003 | Mineral and sapphire watch-glasses Qualitative criteria and test methods |
| NF ISO 8015 : 2006 | TECHNICAL DRAWINGS - FUNDAMENTAL TOLERANCING PRINCIPLE |
| 10/30218221 DC : 0 | BS EN 61314-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| BS EN 3238:2010 | Aerospace series. Metallic materials. Test method. Shear test for wires and rivets |
| 15/30314221 DC : 0 | BS ISO 22917 - SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE |
| 13/30288636 DC : 0 | BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| IEC 60852-3:1992 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations |
| 14/30304198 DC : 0 | BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
| BS 8887-1:2006 | Design for manufacture, assembly, disassembly and end-of-life processing (MADE) General concepts, process and requirements |
| BS 341-3:2002 | Transportable gas container valves Valve outlet connections |
| I.S. EN 61314-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION (IEC 61314-1:2011 (EQV)) |
| 05/30127444 DC : DRAFT JAN 2005 | ISO 10303-238 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 238: APPLICATION PROTOCOL - APPLICATION INTERPRETED MODEL FOR COMPUTERIZED NUMERIC CONTROLLERS |
| BS EN ISO 286-2:2010 | Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes Tables of standard tolerance classes and limit deviations for holes and shafts |
| 08/30180281 DC : DRAFT JUNE 2008 | BS EN 1966 - STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| 08/30184286 DC : DRAFT SEP 2008 | BS EN 12561-5 - RAILWAY APPLICATIONS - TANK WAGONS - PART 5: TOP DEVICES FOR BOTTOM EMPTYING AND TOP FILLING OF LIQUID PRODUCTS |
| 00/706500 DC : DRAFT MAR 2000 | ISO/DIS 5692-2 - AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS ON TOWED VEHICLES - PART 2: COUPLING RING 40 WITH SOCKET |
| CEI EN 61073-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - MECHANICAL SPLICES AND FUSION SPLICE PROTECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| CEI EN 61314-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| BS ISO 4156-3:2005 | Straight cylindrical involute splines. Metric module, side fit Inspection |
| EN ISO 2692:2014 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| 04/30112654 DC : 0 | IEC 60740-1 ED.1 - LAMINATIONS FOR TRANSFORMERS AND INDUCTORS - PART 1: MECHANICAL AND ELECTRICAL CHARACTERISTICS |
| BS EN 62099:2001 | Fibre optic wavelength switches. Generic specification |
| BS 2000-49(2015) : 2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| 07/30167285 DC : 0 | BS EN 60869-1 - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION |
| BS EN 175500:1997 | Harmonized system of quality assessment for electronic components. Sectional specification:cable outlet accessories for connectors, including qualification approval and capability approval |
| ISO 13942:2000 | Bonded abrasive products Limit deviations and run-out tolerances |
| NF EN 61202-1 : 2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| IEEE C37.100.1-2007 | IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
| BS ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines. Specification Oxidized fuels |
| BS EN 61243-3:2014 | Live working. Voltage detectors Two-pole low-voltage type |
| I.S. EN 61269-1:1999 | FIBRE OPTIC TERMINUS SETS - PART 1: GENERIC SPECIFICATION |
| IEC 61243-1:2003+AMD1:2009 CSV | Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c. |
| I.S. EN 62134-1:2009 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| I.S. EN 60875-1:2015 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
| BS EN ISO 14405-2:2011 | Geometrical product specifications (GPS). Dimensional tolerancing Dimensions other than linear sizes |
| ISO 1174-1:2011 | Assembly tools for screws and nuts — Driving squares — Part 1: Driving squares for hand socket tools |
| I.S. EN 62496-4:2011 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
| PREN 10272 : DRAFT 2013 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| ISO 10285:2007 | Rolling bearings — Sleeve type linear ball bearings — Boundary dimensions and tolerances |
| EN ISO 14405-2:2011 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011) |
| UNI ISO 7465 : 2010 | PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFT CARS AND COUNTERWEIGHTS - T-TYPE |
| DIN EN ISO 14405-2:2012-03 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES (ISO 14405-2:2011) |
| BS EN 60875-1:2015 | Fibre optic interconnecting devices and passive components. Non-wavelength-selective fibre optic branching devices Generic specification |
| CEI EN 60603-1 : 2001 | CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 1: GENERIC SPECIFICATION; GENERAL REQUIREMENTS AND GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS, WITH ASSESSED QUALITY |
| UNI EN ISO 15245-1 : 2013 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| ISO/TR 17209:2013 | Hydraulic fluid power Two-, three- and four-port screw-in cartridge valves Cavities with ISO 725 (UN and UNF) threads |
| NF EN 61243-1 : 2005 AMD 1 2010 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| ISO 10303-223:2008 | Industrial automation systems and integration — Product data representation and exchange — Part 223: Application protocol: Exchange of design and manufacturing product information for cast parts |
| ISO 3408-1:2006 | Ball screws Part 1: Vocabulary and designation |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 14679:1997 | Adhesives — Measurement of adhesion characteristics by a three-point bending method |
| DIN EN 12890 : 2002-05 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND COREBOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| CSA C22.2 No. 60320-1 : 2011 : R2016 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 293:2005-10 | Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
| BS EN ISO 9409-1:2004 | Manipulating industrial robots. Mechanical interfaces Plates |
| ISO 15848-1:2015 | Industrial valves Measurement, test and qualification procedures for fugitive emissions Part 1: Classification system and qualification procedures for type testing of valves |
| UNE-EN ISO 2692:2015 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| UNE-EN 12561-5:2012 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| I.S. EN 12561-4:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
| I.S. EN ISO 14660-1:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL FEATURES - PART 1: GENERAL TERMS AND DEFINITIONS |
| I.S. EN ISO 4759-3:2016 | TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F (ISO 4759-3:2016) |
| I.S. EN 1426:2015 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| I.S. EN ISO 293:2005 | PLASTICS - COMPRESSION MOULDING TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| I.S. EN ISO 2692:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO 2692:2014) |
| I.S. EN 12561-3:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| I.S. EN 10272:2016&LC:2016 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN ISO 9409-1:2004 | MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
| DIN EN 12890:2000-06 | FOUNDING - PATTERNS, PATTERN EQUIPMENT AND CORE BOXES FOR THE PRODUCTION OF SAND MOULDS AND SAND CORES |
| I.S. EN 1966:2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| I.S. EN 12561-5:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| I.S. EN 10088-3:2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| I.S. EN 12561-2:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| DIN EN 10088-3:2014-12 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| I.S. EN 12561-6:2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| I.S. EN 10277-1:2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| DIN EN 10277-1:2008-06 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| I.S. EN ISO 15848-1:2015 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015) |
| DIN EN ISO 9409-1:1997-06 | MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERACES - PART 1: PLATES |
| DIN EN ISO 9409-2:2003-10 | MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 2: SHAFTS |
| BS 1916-3:2009 | Limits and fits for engineering Guide to tolerances, limits and fits for large diameters |
| BS 6101-3:1992 | Machine tool ball screws Glossary of terms |
| VDI/VDE/DGQ 2618 Blatt 4.4:2009-09 | Inspection of measuring and test equipment - Test instruction for reference gauges with plane-parallel or spherical measuring faces and for spherical-end gauges and internal callipers |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| 05/30070377 DC : DRAFT OCT 2005 | ISO 10441 - PETROLEUM AND NATURAL GAS INDUSTRIES - FLEXIBLE COUPLINGS FOR MECHANICAL POWER TRANSMISSION - SPECIAL PURPOSE APPLICATIONS |
| BS EN 62074-1:2014 | Fibre optic interconnecting devices and passive components. Fibre optic WDM devices Generic specification |
| DIN ISO 3601-2:2010-08 | Fluid power systems - O-rings - Part 2: Housing dimensions for general applications (ISO 3601-2:2008) |
| 08/30184280 DC : DRAFT SEP 2008 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| 09/30199223 DC : DRAFT JAN 2009 | BS EN 60876-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| BS ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| 08/30163745 DC : DRAFT SEP 2008 | BS EN 12561-2 - RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| BS ISO 5692-2:2002 | Agricultural vehicles. Mechanical connections on towed vehicles Coupling ring 40 with socket |
| BS 4500-4:1985 | ISO limits and fits Specification for system of cone (taper) fits for cones from <i>C</i>=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm |
| BS ISO 7789:2007 | Hydraulic fluid power. Two-, three- and four-port screw-in cartridge valves. Cavities |
| BS ISO 20054:2016 | Plain bearings. Bearings containing dispersed solid lubricants |
| 02/706400 DC : DRAFT MAY 2002 | BS ISO 4156-1 - STRAIGHT CYLINDRICAL INVOLUTE SPLINES - METRIC MODULE, SIDE FIT - PART 1: GENERALITIES |
| BS ISO 1132-1:2000 | Rolling bearings. Tolerances Terms and definitions |
| BS 4480-3:1979 | Specification for plain bearings: metric series Dimensions and tolerances of solid copper alloy bushes |
| BS EN 6072:2010 | Aerospace series. Metallic materials. Test methods. Constant amplitude fatigue testing |
| BS EN 61314-1:2012 | Fibre optic interconnecting devices and passive components. Fibre optic fan-outs Generic specification |
| I.S. EN ISO 898-6:1996 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| BS EN 20898-6:1992 | Mechanical properties of fasteners Nuts with specified proof load values. Fine pitch thread |
| 08/30191292 DC : DRAFT OCT 2008 | BS EN 62077 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
| I.S. EN 15566:2016 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| BS EN 13236 : 2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| UNE-ISO 6489-5:2016 | Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 5: Specifications for non-swivel clevis couplings |
| UNI EN 10088-5 : 2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and cold-formed products of corrosion-resistant steel for use in construction |
| 14/30304019 DC : 0 | BS ISO 5781 - HYDRAULIC FLUID POWER - PRESSURE-REDUCING VALVES, SEQUENCE VALVES, UNLOADING VALVES, THROTTLE VALVES AND CHECK VALVES - MOUNTING SURFACES |
| BS EN 60852-4:1997 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment Transformers and inductors using YUI-2 laminations |
| 07/30164787 DC : 0 | EN 62134-1 - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| BS 4687:1984 | Specification for extended pitch precision roller chains and chainwheels |
| 07/30164411 DC : 0 | EN 61314-1 - FIBRE OPTIC FAN-OUTS - PART 1: GENERIC SPECIFICATION |
| 06/30044269 DC : DRAFT MAR 2006 | BS 8887-1 - DESIGN OUTPUT FOR MANUFACTURE, ASSEMBLY, DISASSEMBLY AND END-OF-LIFE PROCESSING (MADE) - PREPARATION, CONTENT AND STRUCTURE - PART 1: GENERAL CONCEPTS AND REQUIREMENTS |
| 04/30077768 DC : DRAFT FEB 2004 | ISO 4401 - HYDRAULIC FLUID POWER - FOUR-PORT DIRECTIONAL CONTROL VALVES - MOUNTING SURFACES |
| UNE-ISO 6489-2:2010 | Agricultural vehicles -- Mechanical connections between towed and towing vehicles -- Part 2: Specifications for clevis coupling 40 |
| BS EN 62496-1:2009 | Optical circuit boards General |
| BS EN 61169-1:2013 | Radio-frequency connectors Generic specification. General requirements and measuring methods |
| 14/30297431 DC : 0 | BS EN 60875-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
| 04/30126747 DC : DRAFT DEC 2004 | IEC 60874-1 ED.5 - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| DIN EN ISO 8062-3:2008-09 | Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) |
| CEI EN 62099 : 2002 | FIBRE OPTIC WAVELENGTH SWITCHES - GENERIC SPECIFICATION |
| BS ISO 7790:2013 | Hydraulic fluid power. Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10. Clamping dimensions |
| EN 61202-1:2017 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
| 08/30191273 DC : DRAFT OCT 2008 | BS EN 61977 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC FILTERS - GENERIC SPECIFICATION |
| BS ISO 4156-1:2005 | Straight cylindrical involute splines. Metric module, side fit Generalities |
| BS ISO 6263:2013 | Hydraulic fluid power. Compensated flow-control valves. Mounting surfaces |
| BS ISO 3764:2016 | Timekeeping instruments. Movements. Types, dimensions and nomenclature |
| 13/30288572 DC : 0 | BS EN 10272 - STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| I.S. EN 60869-1:2013 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION (IEC 60869-1:2012 (EQV)) |
| BIS IS 1757-1 : 2014 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
| 08/30169101 DC : 0 | BS EN 61978-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
| 12/30242874 DC : 0 | BS ISO 1206:2001/AMD 1 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 - BOUNDARY DIMENSIONS AND TOLERANCES |
| DIN 69051-3:1989-05 | MACHINE TOOLS - BALL SCREWS - ACCEPTANCE CONDITIONS AND ACCEPTANCE TESTS |
| BS ISO 16287:2005 | Plain bearings. Thermoplastic bushes. Dimensions and tolerances |
| I.S. EN 60874-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION (IEC 60874-1:2011 (EQV)) |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| BS ISO 10303-47:1997 | Industrial automation systems and integration. Product data representation and exchange Integrated generic resource. Shape variation tolerances |
| BS EN ISO 1179-2:2013 | Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| 09/30192800 DC : 0 | BS ISO 29262 - PRODUCTION EQUIPMENT FOR MICROSYSTEMS - INTERFACE BETWEEN GRIPPERS AND HANDLING SYSTEM |
| BS EN 60869-1:2013 | Fibre optic interconnecting devices and passive components. Fibre optic passive power control devices Generic specification |
| ISO 6621-1:2018 | Internal combustion engines — Piston rings — Part 1: Vocabulary |
| DIN 28006-1:2009-10 | TOLERANCES AND LIMIT DEVIATIONS FOR AGITATOR VESSELS - PART 1: AGITATOR VESSELS OF METALLIC MATERIALS |
| BS ISO 1174-1:2011 | Assembly tools for screws and nuts. Driving squares Driving squares for hand socket tools |
| 03/317167 DC : DRAFT OCT 2003 | ISO 16287 - PLAIN BEARINGS - THERMOPLASTIC BUSHES - DIMENSIONS AND TOLERANCES |
| BS EN ISO 17296-3:2016 | Additive manufacturing. General principles Main characteristics and corresponding test methods |
| 16/30338711 DC : 0 | BS IEC 60404-8-6 ED 3.0 - MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 10/30234803 DC : 0 | BS EN 61169-1 ED.2 - RADIO FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| 07/30168153 DC : 0 | BS EN 60875-1 - NON-WAVELENGTH-SELECTIVE FIBRE OPTIC BRANCHING DEVICES - PART 1: GENERIC SPECIFICATION |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| 08/30189270 DC : 0 | BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| API 611 : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| 12/30235512 DC : 0 | BS ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| 09/30206090 DC : 0 | BS EN 62496-4 - OPTICAL CIRCUIT BOARDS - INTERFACE STANDARDS - PART 4: GENERAL AND GUIDANCE |
| BS EN 61269-1:1997 | Fibre optic terminus sets Generic specification |
| I.S. EN ISO 148-1:2016 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| UNI ISO 1174-1 : 2012 | ASSEMBLY TOOLS FOR SCREWS AND NUTS - DRIVING SQUARES - PART 1: DRIVING SQUARES FOR HAND SOCKET TOOLS |
| UNE-ISO 3408-1:2011 | Ball screws -- Part 1: Vocabulary and designation |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| DD ISO/TS 13399-50:2007 | Cutting tool data representation and exchange Reference dictionary for reference systems and common concepts |
| BS ISO 1206 : 2001 | ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DIMENSION SERIES 48, 49 AND 69 -BOUNDARY DIMENSIONS AND TOLERANCES |
| ISO 4156-1:2005 | Straight cylindrical involute splines Metric module, side fit Part 1: Generalities |
| S.R. CEN ISO/TS 8062-2:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| NF EN 62077 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
| UNI EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
| ISO 4156-3:2005 | Straight cylindrical involute splines Metric module, side fit Part 3: Inspection |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 2795:2014 | Plain bearings Sintered bushes Dimensions and tolerances |
| I.S. EN 61978-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE CHROMATIC DISPERSION COMPENSATORS - PART 1: GENERIC SPECIFICATION |
| DIN EN 13236:2016-05 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| XP ISO/TS 23768-1 : 2012 XP | ROLLING BEARINGS - PARTS LIBRARY - PART 1: REFERENCE DICTIONARY FOR ROLLING BEARINGS |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| PREN 15566 : DRAFT 2013 | RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| IEC 60404-8-10:2009 | Magnetic materials - Part 8-10: Specifications for individual materials - Magnetic materials (iron and steel) for use in relays |
| NF EN 62134-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| ISO 10303-219:2007 | Industrial automation systems and integration — Product data representation and exchange — Part 219: Application protocol: Dimensional inspection information exchange |
| ISO 14368-3:2003 | Mineral and sapphire watch-glasses — Part 3: Qualitative criteria and test methods |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| IEC 61202-1:2016 | Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1: Generic specification |
| I.S. CWA 14249:2003 | REVISED FUNSTEP APPLICATION REFERENCE MODEL |
| ISO 5781:2016 | Hydraulic fluid power Pressure-reducing valves, sequence valves, unloading valves, throttle valves and check valves Mounting surfaces |
| ISO 14856:2001 | Timekeeping instruments — Wristwatch-cases — Fixing dimensions of non-spring-bar types |
| DIN EN ISO 15848-1:2015-11 | INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015 + AMD.1:2017) |
| DIN EN 1966:2009-07 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| DIN EN 1426:2015-09 | BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF NEEDLE PENETRATION |
| DIN EN ISO 2692:2015-12 | Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2014) |
| ISO 5692-2:2002 | Agricultural vehicles — Mechanical connections on towed vehicles — Part 2: Coupling ring 40 with socket |
| UNE-EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| BS EN ISO 14660-2:2000 | Geometrical product specifications (GPS). Geometrical features Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| BS EN ISO 15245-1 : 2001 | GAS CYLINDERS - PARALLEL THREADS FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATION |
| UNE-EN 10088-3:2015 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| UNE-EN 12561-6:2012 | Railway applications - Tank wagons - Part 6: Manholes |
| IEC 61978-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
| ISO 14405-1:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
| IEC 61977:2015 | Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification |
| EN 61977:2015 | Fibre optic interconnecting devices and passive components - Fibre optic filters - Generic specification |
| UL 60320-1:2ED 2011-05-12 | Appliances Couplers for Household and Similar General Purposes - Part 1: General Requirements |
| EN ISO 4759-1:2000 | Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000) |
| EN ISO 9409-2:2003 | Manipulating industrial robots - Mechanical interfaces - Part 2: Shafts (ISO 9409-2:2002) |
| EN ISO 9409-1:2004 | Manipulating industrial robots - Mechanical interfaces - Part 1: Plates (ISO 9409-1:2004) |
| EN ISO 14660-1:1999 | Geometrical Product Specifications (GPS) - Geometrical features - Part 1: General terms and definitions (ISO 14660-1:1999) |
| EN ISO 293:2005 | Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004) |
| UNI EN 12561-4 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING EMPTYING AND OF LIQUID PRODUCTS |
| UNI EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| UNI EN 13236 : 2011 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| BS 228:1984 | Specification for short pitch transmission precision roller chains and chainwheels |
| EN 12561-4:2011 | Railway applications - Tank wagons - Part 4: Devices for top filling and emptying of liquid products |
| UNI EN 12561-2 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 2: BOTTOM EMPTYING DEVICES FOR LIQUID PRODUCTS INCLUDING VAPOUR RETURN |
| UNI EN 12561-5 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 5: DEVICES FOR VAPOUR RETURN WHILE FILLING OR EMPTYING OF LIQUID PRODUCTS |
| UNI EN 12561-6 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES |
| UNI EN 12561-3 : 2011 | RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| UNI EN 1966 : 2009 | STRUCTURAL ADHESIVES - CHARACTERIZATION OF A SURFACE BY MEASURING ADHESION BY MEANS OF THE THREE POINT BENDING METHOD |
| ISO 10303-238:2007 | Industrial automation systems and integration Product data representation and exchange Part 238: Application protocol: Application interpreted model for computerized numerical controllers |
| ISO 6263:2013 | Hydraulic fluid power — Compensated flow-control valves — Mounting surfaces |
| DIN EN ISO 14405-1:2017-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 1: LINEAR SIZES (ISO 14405-1:2016) |
| ISO/TS 3669-2:2007 | Vacuum technology Bakable flanges Part 2: Dimensions of knife-edge flanges |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| BS QC 480000(1995) : 1995 | CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C. LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 1: GENERIC SPECIFICATION |
| 16/30341970 DC : 0 | BS ISO 1206 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS WITH MACHINED RINGS - BOUNDARY DIMENSIONS, GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) AND TOLERANCE VALUES |
| 99/702254 DC : DRAFT JAN 1999 | ISO/DIS 7465 - PASSENGER LIFTS AND SERVICE LIFTS - GUIDE RAILS FOR LIFTS AND COUNTERWEIGHTS - T-TYPE |
| PREN 13236 : DRAFT 2017 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| 03/301350 DC : DRAFT JAN 2003 | ISO 5744 - PLIERS AND NIPPERS - METHODS OF TEST |
| ISO 1174-2:1996 | Assembly tools for screws and nuts Driving squares Part 2: Driving squares for power socket tools |
| 15/30296029 DC : 0 | BS ISO 4955 - HEAT-RESISTANT STEELS |
| 15/30321721 DC : DRAFT MAY 2015 | BS ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY |
| 01/712196 DC : DRAFT SEP 2001 | ISO 5145 - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| DD ISO/TS 23768-1:2011 | Rolling bearings. Parts library Reference dictionary for rolling bearings |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| 04/300984 DC : DRAFT JAN 2004 | BS ISO 4955 - HEAT-RESISTING STEELS |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| 06/30145636 DC : DRAFT JULY 2006 | ISO 3547-5 - PLAIN BEARINGS - WRAPPED BUSHES - PART 5: CHECKING THE OUTSIDE DIAMETER |
| BS 2547-6:1978 | Specification for basic dimensions of cones and tubes for winding textile yarns Transfer cones. Half angle of the cone 4°20\' |
| BIS IS 800 : 2007 AMD 1 2012 | GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE |
| BS EN 61274-1:2012 | Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors Generic specification |
| DIN EN ISO 14638:2015-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - MATRIX MODEL (ISO 14638:2015) |
| BS ISO 16143-2:2014 | Stainless steels for general purposes Corrosion-resistant semi-finished products, bars, rods and sections |
| UNI CEN ISO/TS 8062-2 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES |
| BS ISO/TR 10064-4:1998 | Code of inspection practice Recommendations relative to surface texture and tooth contact pattern checking |
| 14/30257552 DC : 0 | BS ISO 3245 - ROLLING BEARINGS - NEEDLE ROLLER BEARINGS, DRAWN CUP WITHOUT INNER RING - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS), BOUNDARY DIMENSIONS AND TOLERANCES |
| ISO/TR 18569:2004 | Safety of machinery Guidelines for the understanding and use of safety of machinery standards |
| BIS IS/IEC 60320-1 : 2001 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| ISO 29262:2011 | Production equipment for microsystems Interface between end effector and handling system |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| 05/30107533 DC : DRAFT JUL 2005 | ISO 10303-224 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PRODUCT DATA REPRESENTATION AND EXCHANGE - PART 224: APPLICATION PROTOCOL - MECHANICAL PRODUCT DEFINITION FOR PROCESS PLANNING USING MACHINING FEATURES |
| BS ISO 14856:2001 | Timekeeping instruments. Wristwatch cases. Fixing dimensions of non-spring-bar types |
| BS EN ISO 14638:2015 | Geometrical product specifications (GPS). Matrix model |
| BS ISO 8135:1999 | Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Tolerances |
| CEI EN 61274-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
| BS 5681:1979 | Specification for taper pins, unhardened - metric series |
| 07/30162389 DC : 0 | BS EN 62496-1 - OPTICAL CIRCUIT BOARDS - PART 1: GENERAL STANDARD |
| UNI EN ISO 286-2 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| 12/30259951 DC : 0 | BS EN 62074-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| PD ISO/TR 17209:2013 | Hydraulic fluid power. Two-, three-and four-port screw-in cartridge valves. Cavities with ISO 725 (UN and UNF) threads |
| CEI EN 61202-1 : 2010 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| 17/30359229 DC : DRAFT SEP 2017 | BS EN 13236 - SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| 11/30254168 DC : 0 | BS EN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| DIN ISO 22917:2005-10 | PRECISION SUPERABRASIVES - LIMIT DEVIATIONS AND RUN-OUT TOLERANCES FOR GRINDING WHEELS WITH DIAMOND OR CUBIC BORON NITRIDE (ISO 22917:2016) |
| DD ISO/TS 17450-2:2002 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
| DIN EN ISO 1179-2:2014-03 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| 13/30241415 DC : 0 | BS EN 15566 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - DRAW GEAR AND SCREW COUPLING |
| DIN EN 10088-5:2009-07 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| 17/30332783 DC : 0 | BS ISO 5145 - GAS CYLINDERS - CYLINDER VALVE OUTLETS FOR GASES AND GAS MIXTURES - SELECTION AND DIMENSIONING |
| BS EN 60320-3:2014 | Appliance couplers for household and similar general purposes Standard sheets and gauges |
| 06/30154588 DC : DRAFT AUG 2006 | ISO 6621-1 - INTERNAL COMBUSTION ENGINES - PISTON RINGS - PART 1: VOCABULARY |
| BS ISO 6264:1998 | Hydraulic fluid power. Pressure-relief valves. Mounting surfaces |
| BS EN 62496-4:2011 | Optical circuit boards Interface standards. General and guidance |
| 12/30249003 DC : 0 | BS ISO 3764 - TIMEKEEPING INSTRUMENTS - MOVEMENTS - TYPES, DIMENSIONS AND NOMENCLATURE |
| BS ISO 492:2014 | Rolling bearings. Radial bearings. Geometrical product specifications (GPS) and tolerance values |
| 03/313750 DC : DRAFT AUG 2003 | BS ISO 148-1 - METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| BS ISO 6489-2:2002 | Agricultural vehicles. Mechanical connections between towed and towing vehicles Specifications for clevis coupling 40 |
| I.S. EN 60404-8-6:2017 | MAGNETIC MATERIALS - PART 8-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SOFT MAGNETIC METALLIC MATERIALS |
| 08/30174656 DC : DRAFT SEP 2008 | BS EN 61202-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC ISOLATORS - PART 1: GENERIC SPECIFICATION |
| 08/30184522 DC : DRAFT JUNE 2008 | BS ISO 2129 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INDICATION OF DIMENSIONS AND TOLERANCES - MECHANICAL ENGINEERING DRAWINGS |
| BS ISO 6195:2013 | Fluid power systems and components. Cylinder-rod wiper-ring housings in reciprocating applications. Dimensions and tolerances |
| BS EN 60404-8-6:2017 | Magnetic materials Specifications for individual materials. Soft magnetic metallic materials |
| PREN 2003-2 : 200P1 | AEROSPACE SERIES - STEELS - TEST METHODS - PART 2: IZOD IMPACT TEST |
| I.S. EN 61797-1:1998 | TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT - MAIN DIMENSIONS OF COIL FORMERS - PART 1: COIL FORMERS FOR LAMINATED CORES |
| ISO 6489-2:2002 | Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 2: Specifications for clevis coupling 40 |
| ISO 13074:2012 | Analogue quartz clocks — Fitting dimensions of movements to hands |
| 17/30346164 DC : 0 | BS ISO 20457 - PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| SAE J 1946 : 2007(S2016) | COMPANION FLANGES, TYPE A (EXTERNAL PILOT) AND TYPE S (INTERNAL PILOT) |
| CEI EN 61076-1 : 2007 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| I.S. EN 28167:1993 | PROJECTIONS FOR RESISTANCE WELDING |
| I.S. EN 3238:2010 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
| I.S. EN 50033:1992 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| ISO 5252:1991 | Steel tubes — Tolerance systems |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| NF EN 3238 : 2011 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - SHEAR TEST FOR WIRES AND RIVETS |
| NF ISO 6489-5 : 2011 | AGRICULTURAL VEHICLES - MECHANICAL CONNECTIONS BETWEEN TOWED AND TOWING VEHICLES - PART 5: SPECIFICATIONS FOR NON-SWIVEL CLEVIS COUPLINGS |
| ISO 14368-2:2003 | Mineral and sapphire watch-glasses — Part 2: Assembly to the case by adhesive or using a gasket |
| I.S. EN ISO 8062-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| ISO 12307-1:1994 | Plain bearings — Wrapped bushes — Part 1: Checking the outside diameter |
| ISO 199:2014 | Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values |
| DIN EN ISO 286-2:2010-11 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS |
| I.S. EN 61076-1:2006/A1:2019 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 1: GENERIC SPECIFICATION |
| ISO 5408:2009 | Screw threads Vocabulary |
| ISO 129-1:2018 | Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles |
| UNI ISO 129-1 : 2011 | TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
| OVE/ONORM EN 62077 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CIRCULATORS - GENERIC SPECIFICATION |
| I.S. EN 61243-3:2014 | LIVE WORKING - VOLTAGE DETECTORS - PART 3: TWO-POLE LOW-VOLTAGE TYPE |
| CEI EN 60874-1 : 2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| ISO 14405-2:2011 | Geometrical product specifications (GPS) Dimensional tolerancing Part 2: Dimensions other than linear sizes |
| PREN ISO 2692 : DRAFT 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - MAXIMUM MATERIAL REQUIREMENT (MMR), LEAST MATERIAL REQUIREMENT (LMR) AND RECIPROCITY REQUIREMENT (RPR) (ISO/DIS 2692:2012) |
| UNE-EN ISO 1179-2:2014 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| ISO 14368-1:2000 | Mineral and sapphire watch-glasses — Part 1: Dimensions and tolerances |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO/TR 10064-3:1996 | Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| I.S. EN 61243-1:2005 | LIVE WORKING - VOLTAGE DETECTORS - PART 1: CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 KV A.C. |
| ISO 16143-2:2014 | Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections |
| EN 13236:2010+A1:2015 | Safety requirements for superabrasive products |
| ISO 7790:2013 | Hydraulic fluid power — Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 — Clamping dimensions |
| I.S. EN 61020-1:2009 | ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| IEC 62134-1:2009 | Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1: Generic specification |
| ISO 683-15:1992 | Heat-treatable steels, alloy steels and free-cutting steels — Part 15: Valve steels for internal combustion engines |
| I.S. EN 61169-1:2013 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS |
| ISO 16873:2011 | Hydraulic fluid power — Pressure switches — Mounting surfaces |
| I.S. EN 175500:1998 | CABLE OUTLET ACCESSORIES FOR CONNECTORS, INCLUDING QUALIFICATION APPROVAL AND CAPABILITY APPROVAL (SECTIONAL SPECIFICATION) |
| IEC 62077:2015 | Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification |
| EN 61169-1:2013/AC:2016-02 | RADIO-FREQUENCY CONNECTORS - PART 1: GENERIC SPECIFICATION - GENERAL REQUIREMENTS AND MEASURING METHODS (IEC 61169-1:2013) |
| DIN EN 10272:2016-10 | STAINLESS STEEL BARS FOR PRESSURE PURPOSES |
| BS EN 12561-3:2011 | Railway applications. Tank wagons Bottom filling and emptying devices for gases liquefied under pressure |
| UNE-EN ISO 4759-3:2017 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| IEC 60876-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
| IEC 60869-1:2012 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
| IEC 61797-1:1996 | Transformers and inductors for use in telecommunication and electronic equipment - Main dimensions of coil formers - Part 1: Coil formers for laminated cores |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 128-1:2003 | Technical drawings General principles of presentation Part 1: Introduction and index |
| BS EN 12561-2:2011 | Railway applications. Tank wagons Bottom emptying devices for liquid products including vapour return |
| BS EN ISO 15848-1 : 2015 | INDUSTRIAL VALVES - MEASUREMENT, TEST AND QUALIFICATION PROCEDURES FOR FUGITIVE EMISSIONS - PART 1: CLASSIFICATION SYSTEM AND QUALIFICATION PROCEDURES FOR TYPE TESTING OF VALVES (ISO 15848-1:2015) |
| IEC 60874-1:2011 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 1: Generic specification |
| UNE-EN 12561-2:2012 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| IEC 61314-1:2011 | Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| IEC 60852-4:1996 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
| BS EN ISO 6284:1999 | Construction drawings. Indication of limit deviations |
| UNE-EN 12561-3:2012 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| IEC 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| BS EN 10088-3:2014 | Stainless steels Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| ISO 293:2004 | Plastics — Compression moulding of test specimens of thermoplastic materials |
| IEC 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO 6284:1996 | Construction drawings — Indication of limit deviations |
| IEC 60404-8-6:2016 | Magnetic materials - Part 8-6: Specifications for individual materials - Soft magnetic metallic materials |
| BS EN 28167:1992 | Specification for projections for resistance welding |
| ISO 9409-2:2002 | Manipulating industrial robots — Mechanical interfaces — Part 2: Shafts |
| IEC 61274-1:2011 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
| ISO 14660-2:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| ISO 14638:2015 | Geometrical product specifications (GPS) Matrix model |
| IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| IEC 62496-1:2008 | Optical circuit boards - Part 1: General |
| IEC 62099:2001 | Fibre optic wavelength switches - Generic specification |
| ISO 15245-1:2001 | Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification |
| BS EN ISO 14660-1:2000 | Geometrical product specifications (GPS). Geometrical features General terms and definitions |
| IEC 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
| BS EN ISO 293 : 2005 | PLASTICS - COMPRESSION MOULDING OF TEST SPECIMENS OF THERMOPLASTIC MATERIALS |
| BS EN 12561-4:2011 | Railway applications. Tank wagons Devices for top filling and emptying of liquid products |
| ISO 1132-1:2000 | Rolling bearings — Tolerances — Part 1: Terms and definitions |
| ISO 9409-1:2004 | Manipulating industrial robots — Mechanical interfaces — Part 1: Plates |
| BS EN 1426:2015 | Bitumen and bituminous binders. Determination of needle penetration |
| BS EN 25822:1992 | Spot welding equipment. Taper plug gauges and taper ring gauges |
| BS EN 1966:2009 | Structural adhesives. Characterization of a surface by measuring adhesion by means of the three point bending method |
| ISO 17296-3:2014 | Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
| IEC 60740-1:2005 | Laminations for transformers and inductors - Part 1: Mechanical and electrical characteristics |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| ISO 4759-3:2016 | Tolerances for fasteners Part 3: Washers for bolts, screws and nuts Product grades A, C and F |
| UNE-EN ISO 15848-1:2015 | Industrial valves - Measurement, test and qualification procedures for fugitive emissions - Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2015) |
| UNE-EN 61243-3:2015 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| EN 20898-6 : 1992 | MECHANICAL PROPERTIES OF FASTENERS - NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| EN ISO 4759-3:2016 | Tolerances for fasteners - Part 3: Washers for bolts, screws and nuts - Product grades A, C and F (ISO 4759-3:2016) |
| EN ISO 1179-2:2013 | Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2013) |
| UNI EN 10277-1 : 2008 | BRIGHT STEEL PRODUCTS - TECHNICAL DELIVERY CONDITIONS - PART 1: GENERAL |
| EN 25822:1991 | Spot welding equipment - Taper plug gauges and taper ring gauges (ISO 5822:1988) |
| EN 6072:2010 | Aerospace series - Metallic materials - Test methods - Constant amplitude fatigue testing |
| EN ISO 17296-3:2016 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| EN 12561-2:2011 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| EN 15566:2016 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| EN ISO 6284:1999 | Construction drawings - Indication of limit deviations (ISO 6284:1996) |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| EN 3238:2010 | Aerospace series - Metallic materials - Test method - Shear test for wires and rivets |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN ISO 14660-2:1999 | Geometrical Product Specifications (GPS) - Geometrical features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999) |
| EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
| EN ISO 14405-1:2016 | Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016) |
| EN ISO 898-6:1995 | Mechanical properties of fasteners - Part 6: Nuts with specified proof load values - Fine pitch thread (ISO 898-6:1994) |
| EN 1966:2009 | Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method |
| BS ISO 12301:2007 | Plain bearings. Quality control techniques and inspection of geometrical and material quality characteristics |
| BS ISO 5781:2000 | Hydraulic fluid power. Pressure reducing valves, sequence valves, unloading valves, throttle valves and check valves. Mounting surfaces |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| BS EN 62134-1:2009 | Fibre optic interconnecting devices and passive components. Fibre optic closures Generic specification |
| 16/30353588 DC : 0 | BS EN 61020-1 ED 3.0 - ELECTROMECHANICAL SWITCHES FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| BS EN 60740-1:2005 | Laminations for transformers and inductors Mechanical and electrical characteristics |
| 16/30335541 DC : 0 | BS ISO 3548-2 - PLAIN BEARINGS - THIN-WALLED HALF BEARINGS WITH OR WITHOUT FLANGE - PART 2: MEASUREMENT OF WALL THICKNESS AND FLANGE THICKNESS |
| UNE-EN 15566:2017 | Railway applications - Railway rolling stock - Draw gear and screw coupling |
| BS 6404-8.10:1995 | Magnetic materials. Individual materials Specification for magnetic materials (iron and steel) for use in relays |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| 11/30237803 DC : 0 | BS ISO 7790 - HYDRAULIC FLUID POWER - FOUR-PORT MODULAR STACK VALVES AND FOUR-PORT DIRECTIONAL CONTROL VALVES, SIZES 02, 03, 05, 07, 08 AND 10 - CLAMPING DIMENSIONS |
| 14/30280974 DC : 0 | BS EN ISO 4759-3 - TOLERANCES FOR FASTENERS - PART 3: WASHERS FOR BOLTS, SCREWS AND NUTS - PRODUCT GRADES A, C AND F |
| 11/30196431 DC : 0 | BS ISO 13074 - ANALOGUE QUARTZ CLOCKS - FITTING DIMENSIONS OF MOVEMENTS TO HANDS |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| ISO 10552:2014 | Timekeeping instruments Crowns and sealed tubes Designs and dimensions |
| 08/30180235 DC : DRAFT MAR 2008 | BS ISO 5408 - SCREW THREADS - VOCABULARY |
| BS EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment Generic specification |
| BS ISO 19259:2015 | Plain bearings. Bearings with embedded solid lubricants |
| UNE-EN 61020-1:2011 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| 11/30231340 DC : 0 | BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
| BS ISO 3408-1:2006 | Ball screws Vocabulary and designation |
| PREN 10088-3 : DRAFT 2011 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| 10/30218225 DC : 0 | BS EN 60874-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION |
| DD ISO/TS 3669-2:2007 | Vacuum technology. Bakable flanges Dimensions of knife-edge flanges |
| BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
| DIN EN 50347:2003-09 | General purpose three-phase induction motors having standard dimensions and outputs - Frame numbers 56 to 315 and flange numbers 65 to 740; German version EN 50347:2001 |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| IEC 63032:2018 | Fibre optic interconnecting devices and passive components - Fibre optic tuneable bandpass filters - Generic specification |
| BS ISO 16873:2011 | Hydraulic fluid power. Pressure switches. Mounting surfaces |
| 12/30258651 DC : 0 | BS ISO 492 - ROLLING BEARINGS - RADIAL BEARINGS - DIMENSIONAL AND GEOMETRICAL TOLERANCES |
| ISO 22917:2016 | Precision superabrasives Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride |
| API 611 REDLINE : 2008 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| BS EN 61073-1:2009 | Fibre optic interconnecting devices and Passive components. Mechanical splices and fusion splice protectors for optical fibres and cables Generic specification |
| 10/30218213 DC : 0 | BS EN 61274-1 - FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION |
| BS 5983-5:1982 | Metric spherical plain bearings Specification for dimensions and tolerances of spherical plain bearing rod ends, dimension series E and JK |
| 01/715452 DC : DRAFT NOV 2001 | PREN 10088-3 - STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMI-FINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL AND CONSTRUCTION PURPOSES |
| 10/30200334 DC : 0 | BS ISO 129-1 - TECHNICAL DRAWINGS - INDICATION OF DIMENSIONS AND TOLERANCES - PART 1: GENERAL PRINCIPLES |
| I.S. EN 6072:2010 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - CONSTANT AMPLITUDE FATIGUE TESTING |
| BS ISO 13942:2000 | Bonded abrasive products. Limit deviations and run-out tolerances |
| 10/30234324 DC : DRAFT DEC 2010 | BS EN 12561-4 - RAILWAY APPLICATIONS - TANK WAGONS - PART 4: DEVICES FOR TOP FILLING AND EMPTYING OF LIQUID PRODUCTS |
| ISO 19259:2015 | Plain bearings Bearings with embedded solid lubricants |
| 04/30125936 DC : DRAFT NOV 2004 | ISO 10135 - TECHNICAL PRODUCT DOCUMENTATION (TPD) - DRAWING INDICATIONS FOR MOULDED PARTS |
| 12/30274628 DC : 0 | BS EN 60320-3 - APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES |
| 13/30274174 DC : 0 | BS ISO 8133 - HYDRAULIC FLUID POWER - MOUNTING DIMENSIONS FOR ACCESSORIES FOR SINGLE ROD CYLINDERS, 16 MPA (160 BAR) COMPACT SERIES |
| BS EN 61977:2015 | Fibre optic interconnecting devices and passive components. Fibre optic filters. Generic specification |
| BS ISO TR 10064-3:1996 | Code of inspection practice Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
| 07/30172547 DC : 0 | BS EN 62074-1 - FIBRE OPTIC WDM DEVICES - PART 1: GENERIC SPECIFICATION |
| 07/30168042 DC : 0 | BS ISO 26622-1 - MODULAR TAPER INTERFACE WITH BALL TRACK SYSTEM - PART 1: DIMENSIONS AND DESIGNATION OF SHANKS |
| 10/30234321 DC : DRAFT DEC 2010 | BS EN 12561-3 - RAILWAY APPLICATIONS - TANK WAGONS - PART 3: BOTTOM FILLING AND EMPTYING DEVICES FOR GASES LIQUEFIED UNDER PRESSURE |
| 91/78933 DC : DRAFT AUG 1991 | ISO/DIS 1938-3 - INSPECTION OF PLAIN WORKPIECES - PART 3: GUIDELINES FOR INSPECTION USING WORKSHOP MEASURING INSTRUMENTS |
| 04/30125584 DC : DRAFT NOV 2004 | IEC 61274-1 ED 2 - ADAPTORS FOR OPTICAL FIBRES AND CABLES - PART 2: GENERIC SPECIFICATION |
| BS ISO 199:2014 | Rolling bearings. Thrust bearings. Geometrical product specification (GPS) and tolerance values |
| BS ISO 4401:2005 | Hydraulic fluid power. Four-port directional control valves. Mounting surfaces |
| BS 1836-1:1982 | Flyer bobbins Specification for dimensions of plastics flyer bobbins for speed frames |
| BS ISO 3245:2015 | Rolling bearings. Needle roller bearings with drawn cup and without inner ring. Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| API 611 : 2008 : R2014 | GENERAL-PURPOSE STEAM TURBINES FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| BS EN 62077:2016 | Fibre optic interconnecting devices and passive components. Fibre optic circulators. Generic specification |
| BS EN 60874-1:2012 | Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables Generic specification |
| ISO 20054:2016 | Plain bearings Bearings containing dispersed solid lubricants |
| CEI EN 62496-4 : 2012 | OPTICAL CIRCUIT BOARDS - PART 4: INTERFACE STANDARDS - GENERAL AND GUIDANCE |
| DIN 406-10:1992-12 | TECHNICAL DRAWINGS; DIMENSIONING; DEFINITIONS, GENERAL PRINCIPLES |
| DIN ISO 3408-1:2011-04 | Ball screws - Part 1: Vocabulary and designation (ISO 3408-1:2006) |
| ISO 3466:2016 | Machine taper pin reamers with parallel shanks |
| I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
| I.S. EN 60876-1:2014 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC SPATIAL SWITCHES - PART 1: GENERIC SPECIFICATION |
| I.S. 231:1979 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
| CEI EN 62134-1 : 2011 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC CLOSURES - PART 1: GENERIC SPECIFICATION |
| UNE-ISO 5692-2:2010 | Agricultural vehicles -- Mechanical connections on towed vehicles -- Part 2: Coupling ring 40 with socket |
| I.S. EN 61274-1:2012 | FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - ADAPTORS FOR FIBRE OPTIC CONNECTORS - PART 1: GENERIC SPECIFICATION (IEC 61274-1:2011 (EQV)) |
| I.S. EN 60320-3:2014 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 3: STANDARD SHEETS AND GAUGES |
| I.S. EN 50109-2-4:1997 | HAND CRIMPING TOOLS - TOOLS FOR THE CRIMP TERMINATION OF ELECTRIC CABLES AND WIRES FOR LOW FREQUENCY AND RADIO FREQUENCY APPLICATIONS - PART 2-4: PARTICULAR REQUIREMENTS FOR CENTRE CONTACTS OF RF CONNECTORS, SERIES SMZ |
| BS 4480-9:1995 | Plain bearings: metric series Checking the outside diameter of wrapped bushes |
| NFPA T3.5.50 : 2009 : R2014 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| NFPA T3.5.50 : 2009 | HYDRAULIC FLUID POWER - TWO-, THREE-, AND FOUR-PORT SCREW-IN CARTRIDGE VALVES - CAVITIES WITH UN AND UNF THREADS |
| BS ISO 6489-5:2011 | Agricultural vehicles. Mechanical connections between towed and towing vehicles Specifications for non-swivel clevis couplings |
| UNI EN ISO 1179-2 : 2013 | CONNECTIONS FOR GENERAL USE AND FLUID POWER - PORTS AND STUD ENDS WITH ISO 228-1 THREADS WITH ELASTOMERIC OR METAL-TO-METAL SEALING - PART 2: HEAVY-DUTY (S SERIES) AND LIGHT-DUTY (L SERIES) STUD ENDS WITH ELASTOMERIC SEALING (TYPE E) |
| NF EN ISO 14405-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL TOLERANCING - PART 2: DIMENSIONS OTHER THAN LINEAR SIZES |
| NF EN 10088-5 : 2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| NF ISO 5408 : 2009 | SCREW THREADS - VOCABULARY |
| UNE-EN ISO 17296-3:2017 | Additive manufacturing - General principles - Part 3: Main characteristics and corresponding test methods (ISO 17296-3:2014) |
| ISO 3547-5:2007 | Plain bearings Wrapped bushes Part 5: Checking the outside diameter |
| I.S. EN 13236:2010 | SAFETY REQUIREMENTS FOR SUPERABRASIVE PRODUCTS |
| ISO 1206:2018 | Rolling bearings — Needle roller bearings with machined rings — Boundary dimensions, geometrical product specifications (GPS) and tolerance values |
| ISO 492:2014 | Rolling bearings — Radial bearings — Geometrical product specifications (GPS) and tolerance values |
| ISO 10303-214:2010 | Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes |
| I.S. EN 62496-1:2009 | OPTICAL CIRCUIT BOARDS - PART 1: GENERAL |
| IEC 60807-1:1991 | Rectangular connectors for frequencies below 3 MHz - Part 1:Generic specification - General requirements and guide for thepreparation of detail specifications for connectors with assessedquality |
| ISO 3601-2:2016 | Fluid power systems — O-rings — Part 2: Housing dimensions for general applications |
| ISO 10303-224:2006 | Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features |
| ISO 5145:2017 | Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning |
| ISO/TR 10064-4:1998 | Code of inspection practice Part 4: Recommendations relative to surface texture and tooth contact pattern checking |
| CEN ISO/TS 8062-2 : 2013 COR 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 2: RULES (ISO/TS 8062-2:2013, CORRECTED VERSION 2013-11-01) |
| DIN EN 12561-5:2011-10 | Railway applications - Tank wagons - Part 5: Devices for vapour return while filling or emptying of liquid products |
| DIN EN ISO 9409-1:2004-09 | MANIPULATING INDUSTRIAL ROBOTS - MECHANICAL INTERFACES - PART 1: PLATES |
| DIN EN 12561-6:2011-10 | Railway applications - Tank wagons - Part 6: Manholes |
| DIN EN 12561-2:2011-10 | Railway applications - Tank wagons - Part 2: Bottom emptying devices for liquid products including vapour return |
| DIN EN 12561-3:2011-10 | Railway applications - Tank wagons - Part 3: Bottom filling and emptying devices for gases liquefied under pressure |
| BS EN ISO 4759-1:2001 | Tolerances for fasteners Bolts, screws, studs and nuts. Product grades A, B and C |
| IEC 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| ISO 1179-2:2013 | Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| PD ISO/TR 18569:2004 | Safety of machinery. Guidelines for the understanding and use of safety of machinery standards. |
| BS EN ISO 9409-2:2003 | Manipulating industrial robots. Mechanical interfaces Shafts |
| BS EN 12561-6:2011 | Railway applications. Tank wagons Manholes |
| ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
| ISO/TS 8062-2:2013 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 2: Rules |
| BS EN 20286-2:1993 | ISO system of limits and fits ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts |
| BS EN 10277-1:2008 | Bright steel products. Technical delivery conditions General |
| EN 62099:2001 | Fibre optic wavelength switches - Generic specification |
| EN 61978-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators - Part 1: Generic specification |
| EN 60875-1:2015 | Fibre optic interconnecting devices and passive components - Non-wavelength-selective fibre optic branching devices - Part 1: Generic specification |
| DIN ISO 10285:2009-11 | ROLLING BEARINGS - SLEEVE TYPE LINEAR BALL BEARINGS - BOUNDARY DIMENSIONS AND TOLERANCES |
| EN 62074-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification |
| EN 50033 : 1991 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| EN 10088-5:2009 | Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes |
| EN 60869-1:2013 | Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification |
| DIN ISO 8489-5:1997-05 | TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 5: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE OF 5 DEGREES 57 MINUTES |
| DIN ISO 6284:1997-09 | Technical drawings - Construction drawings - Indication of limit deviations (ISO 6284:1996) |
| EN 61269-1:1997 | Fibre optic terminus sets - Part 1: Generic specification |
| EN 61274-1:2012 | Fibre optic interconnecting devices and passive components - Adaptors for fibre optic connectors - Part 1: Generic specification |
| EN 60603-1:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
| EN 62496-4:2011 | Optical circuit boards - Part 4: Interface standards - General and guidance |
| DIN EN ISO 898-6:1996-02 | MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| DIN ISO 8489-4:1997-05 | TEXTILE MACHINERY AND ACCESSORIES - CONES FOR CROSS WINDING - PART 4: DIMENSIONS, TOLERANCES AND DESIGNATION OF CONES WITH A HALF ANGLE 4 DEGREES 20 MINUTES FOR WINDING FOR DYEING PURPOSES |
| EN 60320-3:2014 | Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges |
| EN 60876-1:2014 | Fibre optic interconnecting devices and passive components - Fibre optic spatial switches - Part 1: Generic specification |
| DIN EN ISO 148-1:2017-05 | METALLIC MATERIALS - CHARPY PENDULUM IMPACT TEST - PART 1: TEST METHOD (ISO 148-1:2016) |
| EN 61073-1:2009 | Fibre optic interconnecting devices and passive components - Mechanical splices and fusion splice protectors for optical fibres and cables - Part 1: Generic specification |
| EN 60852-4:1996 | Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations |
| EN 61020-1:2009 | Electromechanical switches for use in electrical and electronic equipment - Part 1: Generic specification |
| ASME B5.1M : 1985 : R2014 | T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES |
| ASME B5.1M : 1985 : R2009 | T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES |
| ENV 737-6:2003 | Medical gas pipeline systems - Part 6: Dimensions and allocation of probes for terminal units for compressed medical gases and vacuum |
| ASME B32.100 : 2016 | PREFERRED METRIC SIZES FOR FLAT, ROUND, SQUARE, RECTANGULAR AND HEXAGONAL METAL PRODUCTS |
| BS 4215-4:1990 | Resistance spot welding electrodes, electrode holders and ancillary equipment Specification for taper plug gauges and taper ring gauges |
| I.S. EN ISO 6284:1999 | CONSTRUCTION DRAWINGS - INDICATION OF LIMIT DEVIATIONS |
| ONORM EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ASME B5.1M : 1985 : R2004 | T-SLOTS, THEIR BOLTS, NUTS, AND TONGUES |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 4759-1:2000 | Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 1:2016 | Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO 14660-2:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 14660-1:1999 | Geometrical Product Specifications (GPS) Geometrical features Part 1: General terms and definitions |
| ISO/R 1938:1971 | ISO system of limits and fits Part II : Inspection of plain workpieces |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.