ISO 2470-2:2008
Current
Current
The latest, up-to-date edition.
Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 2: Outdoor daylight conditions (D65 brightness)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
22-10-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2470-2:2008 specifies a method for measuring the D65 brightness of pulps, papers and boards.
ISO 2470-2:2008 is limited in its scope to white and near-white pulps, papers and boards, particularly those exhibiting fluorescence which promotes the appearance of whiteness. The measurement can only be made in an instrument in which the ultraviolet energy level of the illumination has been adjusted to correspond to the CIE standard illuminant D65 using a fluorescent reference standard.
The source employed in ISO 2470-2:2008 excites almost twice as much fluorescence as the illuminant in ISO 2470-1. Consequently, ISO 2470-2:2008 is better suited for measuring the fluorescent contribution to the brightness. However, D65 brightness should not be confused with ISO brightness which closely approximates the brightness of papers viewed under indoor conditions.
| DevelopmentNote |
Supersedes ISO/DIS 2470-2. (10/2008)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BIS IS/ISO 2470-2 : 2008 | Identical |
| SS-ISO 2470-2:2008 | Identical |
| AS/NZS 1301.520:2016 | Identical |
| BS ISO 2470-2:2008 | Identical |
| NEN ISO 2470-2 : 2013 | Identical |
| NF ISO 2470-2 : 2008 | Identical |
| UNI ISO 2470-2 : 2010 | Identical |
| BS ISO 2469:2014 | Paper, board and pulps. Measurement of diffuse radiance factor (diffuse reflectance factor) |
| 15/30325867 DC : 0 | BS EN 868-3 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| BS ISO 19699-1:2017 | Superabsorbent polymer. Sodium polyacrylate resin for absorbing blood Test methods |
| ISO 12625-7:2014 | Tissue paper and tissue products Part 7: Determination of optical properties Measurement of brightness and colour with D65/10 (outdoor daylight) |
| EN ISO 12625-7:2014 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| UNE-EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| BS EN ISO 12625-1:2011 | Tissue paper and tissue products General guidance on terms |
| UNE-EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| UNE-EN ISO 12625-7:2015 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2014) |
| BS EN 868-3:2017 | Packaging for terminally sterilized medical devices Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5). Requirements and test methods |
| UNE-EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| DIN EN 868-2:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| PD ISO/TR 10688:2015 | Paper, board and pulps. Basic terms and equations for optical properties |
| 15/30274545 DC : 0 | BS ISO 18522 - PAPER AND BOARD - AUTOMATED OFF-LINE TESTING OF PHYSICAL PROPERTIES FOR CD (CROSS DIRECTION) PROFILES |
| PREN 868-7 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| 09/30207367 DC : 0 | BS ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL PRINCIPLES FOR THE USE OF TERMS |
| 12/30252903 DC : 0 | BS ISO 15397 - GRAPHIC TECHNOLOGY - COMMUNICATION OF GRAPHIC PAPER PROPERTIES |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO/TS 20460:2015 | Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges |
| PREN 868-3 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| BS EN 868-7:2017 | Packaging for terminally sterilized medical devices Adhesive coated paper for low temperature sterilization processes. Requirements and test methods |
| I.S. EN ISO 12625-7:2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREE (OUTDOOR DAYLIGHT) (ISO 12625-7:2014) |
| I.S. EN 868-3:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| I.S. EN 868-2:2017 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| 17/30357546 DC : 0 | BS EN ISO 12625-1 - TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| BS ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse reflectance Outdoor daylight conditions (D65/10°) |
| 14/30287212 DC : 0 | BS ISO 11475 - PAPER AND BOARD - DETERMINATION OF CIE WHITENESS, D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| 15/30325864 DC : 0 | BS EN 868-7 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO 15397:2014 | Graphic technology. Communication of graphic paper properties |
| UNE-ISO 5631-2:2015 | Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º) |
| ISO 19699-1:2017 | Superabsorbent polymer — Sodium polyacrylate resin for absorbing blood — Part 1: Test methods |
| ISO 15397:2014 | Graphic technology — Communication of graphic paper properties |
| BS ISO 2470-1:2016 | Paper, board and pulps. Measurement of diffuse blue reflectance factor Indoor daylight conditions (ISO brightness) |
| PREN 868-2 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 12647-3:2013 | Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint |
| EN 868-7:2017 | Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods |
| UNI EN ISO 12625-7 : 2014 | TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR WITH D65/10 DEGREES (OUTDOOR DAYLIGHT) |
| UNI EN ISO 12625-1 : 2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| 15/30325855 DC : 0 | BS EN 868-2 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| 11/30239244 DC : 0 | BS EN ISO 12625-7 - TISSUE PAPER AND TISSUE PRODUCTS - PART 7: DETERMINATION OF OPTICAL PROPERTIES - MEASUREMENT OF BRIGHTNESS AND COLOUR |
| ISO/TR 10688:2015 | Paper, board and pulps Basic terms and equations for optical properties |
| 16/30328584 DC : 0 | BS ISO 19699-1 - PLASTICS - SUPERABSORBENT POLYMER - SODIUM POLYACRYLATE RESIN FOR ABSORBING BLOOD - PART 1: TEST METHODS |
| 15/30311307 DC : 0 | BS ISO 5631-2 - PAPER AND BOARD - DETERMINATION OF COLOUR BY DIFFUSE REFLECTANCE - PART 2: OUTDOOR DAYLIGHT CONDITIONS (D65/10 DEGREES) |
| PREN 868-6 : DRAFT 2015 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| BS ISO 12647-3:2013 | Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints Coldset offset lithography on newsprint |
| ISO 12625-1:2011 | Tissue paper and tissue products Part 1: General guidance on terms |
| ISO 5631-2:2015 | Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees) |
| DIN EN 868-6:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 12625-7:2014-08 | Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10? (outdoor daylight) (ISO 12625-7:2014) |
| BS EN 868-2:2017 | Packaging for terminally sterilized medical devices Sterilization wrap. Requirements and test methods |
| BS EN ISO 12625-7:2014 | Tissue paper and tissue products Determination of optical properties. Measurement of brightness and colour with D65/10° (outdoor daylight) |
| BS EN 868-6:2017 | Packaging for terminally sterilized medical devices Paper for low temperature sterilization processes. Requirements and test methods |
| EN 868-2:2017 | Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods |
| EN ISO 12625-1:2011 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| EN 868-6:2017 | Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods |
| EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| UNE-ISO 2470-1:2012 | Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness) |
| BS ISO 18522:2016 | Paper and board. Automated off-line testing of physical properties for CD (cross direction) profiles |
| PD ISO/TS 20460:2015 | Paper and board. Automated on-line testing. Metrological comparability between standardized measurements and output of on-line gauges |
| BS ISO 11475:2017 | Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight) |
| 15/30325858 DC : 0 | BS EN 868-6 - PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-7:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 7: ADHESIVE COATED PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| TAPPI T 579 : 2012 | DIFFUSE BRIGHTNESS OF PAPER, PAPERBOARD AND PULP (D/0) (ULTRAVIOLET LEVEL D65) |
| UNE-ISO 12647-3:2015 | Graphic technology. Process control for the production of half-tone colour separations, proofs and production prints. Part 3: Coldset offset lithography on newsprint. |
| I.S. EN ISO 12625-1:2011 | TISSUE PAPER AND TISSUE PRODUCTS - PART 1: GENERAL GUIDANCE ON TERMS |
| DIN EN 868-3:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-2:2015-08 (Draft) | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 2: STERILIZATION WRAP - REQUIREMENTS AND TEST METHODS |
| UNE-EN ISO 12625-1:2012 | Tissue paper and tissue products - Part 1: General guidance on terms (ISO 12625-1:2011) |
| UNE-EN 868-3:2017 | Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods |
| DIN EN 868-3:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE MANUFACTURE OF POUCHES AND REELS (SPECIFIED IN EN 868-5) - REQUIREMENTS AND TEST METHODS |
| DIN EN 868-6:2017-05 | PACKAGING FOR TERMINALLY STERILIZED MEDICAL DEVICES - PART 6: PAPER FOR LOW TEMPERATURE STERILIZATION PROCESSES - REQUIREMENTS AND TEST METHODS |
| ISO 4094:2005 | Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories |
| ISO 11476:2016 | Paper and board Determination of CIE whiteness, C/2 (indoor illumination conditions) |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 2470-1:2016 | Paper, board and pulps Measurement of diffuse blue reflectance factor Part 1: Indoor daylight conditions (ISO brightness) |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 11475:2017 | Paper and board — Determination of CIE whiteness, D65/10 degrees (outdoor daylight) |
| ISO 10526:2007 | CIE standard illuminants for colorimetry |
| ISO 2469:2014 | Paper, board and pulps — Measurement of diffuse radiance factor (diffuse reflectance factor) |
| ISO 3688:1999 | Pulps — Preparation of laboratory sheets for the measurement of diffuse blue reflectance factor (ISO brightness) |
| ISO 7213:1981 | Pulps Sampling for testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.