ISO 22734-2:2011
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Hydrogen generators using water electrolysis process Part 2: Residential applications
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
16-07-2021
Superseded by
Language(s)
English
Published date
15-11-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 22734-2:2011 defines the construction, safety and performance requirements of packaged hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to electrolyse water to produce hydrogen.
ISO 22734-2:2011 is applicable to hydrogen generators that use the following types of ion transport medium: a group of aqueous bases or solid polymeric materials with acidic function group additions, such as acid proton exchange membrane.
ISO 22734-2:2011 is applicable to hydrogen generators intended for indoor and outdoor residential use in sheltered areas, such as car-ports, garages, utility rooms and similar areas of a residence. ISO 22734-2:2011 includes cord-connected equipment for outdoor and garage use only.
Portable generators as well as hydrogen generators that can also be used to generate electricity, such as reversible fuel cells, are excluded from the scope of ISO 22734-2:2011.
Hydrogen generators that also supply oxygen as a product are excluded from the scope of ISO 22734-2:2011.
| DevelopmentNote |
Supersedes ISO/DIS 22734-2. (11/2011)
|
| DocumentType |
Standard
|
| Pages |
44
|
| ProductNote |
THIS STANDARD ALSO REFERS TO IEC 61204-1, IEC 61508,ANSI/CGA Z83.8/2.6-M96,
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| GOST R ISO 22734-2 : 2014 | Identical |
| NEN ISO 22734-2 : 2011 | Identical |
| BS ISO 22734-2:2011 | Identical |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 15500-3:2012 | Road vehicles Compressed natural gas (CNG) fuel system components Part 3: Check valve |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| IEC 60079-1:2014 RLV | Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d" |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IEC 60947-6-2:2002+AMD1:2007 CSV | Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS) |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| IEC 60364-4-43:2008 | Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurrent |
| IEC 60068-2-18:2017 | Environmental testing - Part 2-18: Tests - Test R and guidance: Water |
| IEC 60947-7-2:2009 | Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors |
| CSA 2.6 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| ISO 1431-3:2017 | Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers |
| SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| IEC 60068-2-68:1994 | Environmental testing - Part 2-68: Tests - Test L: Dust and sand |
| EN 13202 : 2000 | ERGONOMICS OF THE THERMAL ENVIRONMENT - TEMPERATURES OF TOUCHABLE HOT SURFACES - GUIDANCE FOR ESTABLISHING SURFACE TEMPERATURE LIMIT VALUES IN PRODUCT STANDARDS WITH THE AID OF EN 563 |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 17398:2004 | Safety colours and safety signs — Classification, performance and durability of safety signs |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| IEC 61131-1:2003 | Programmable controllers - Part 1: General information |
| ISO 3864-2:2016 | Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels |
| ISO 15761:2002 | Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| ISO 4672:1997 | Rubber and plastics hoses Sub-ambient temperature flexibility tests |
| IEC 60439-2:2000+AMD1:2005 CSV | Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways) |
| ISO 14511:2001 | Measurement of fluid flow in closed conduits Thermal mass flowmeters |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 9300:2005 | Measurement of gas flow by means of critical flow Venturi nozzles |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 60947-5-3:2013 | Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDDB) |
| UL 1469:2ED 2006-12-07 | Standard for Strength of Body and Hydraulic Pressure Loss Testing of Backflow Special Check Valves |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| IEC 60335-2-80:2015 RLV | Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans |
| ANSI B11 TR3 : 2000 | RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| ISO 11114-3:2010 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere |
| IEC 60947-7-1:2009 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 60335-2-35:2012+AMD1:2016 CSV | Household and similar electrical appliances - Safety - Part 2-35:Particular requirements for instantaneous water heaters |
| IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 1330-8 : 1998 | NON-DESTRUCTIVE TESTING - TERMINOLOGY - TERMS USED IN LEAK TIGHTNESS TESTING |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| IEC TR 60877:1999 | Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| IEC 61558-2-17:1997 | Safety of power transformers, power supply units and similar - Part2: Particular requirements for transformers for switch mode powersupplies |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| IEC 60364-6:2016 | Low voltage electrical installations - Part 6: Verification |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| ISO 14847:1999 | Rotary positive displacement pumps Technical requirements |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| ISO 22734-1:2008 | Hydrogen generators using water electrolysis process Part 1: Industrial and commercial applications |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| UL 499:14ED 2014-11-07 | Electric Heating Appliances |
| EN 13625:2001 | Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| IEC 61069-7:2016 | Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 7: Assessment of system safety |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| IEC 60079-29-2:2015 RLV | Explosive atmospheres - Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| EN 334:2005+A1:2009 | Gas pressure regulators for inlet pressures up to 100 bar |
| IEC 60947-4-2:2011 | Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 10286:2007 | Gas cylinders Terminology |
| ISO 10790:2015 | Measurement of fluid flow in closed conduits Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements) |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 26142:2010 | Hydrogen detection apparatus Stationary applications |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| UL 429:7ED 2013-11-06 | Electrically Operated Valves |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| IEC 61131-2:2017 | Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests |
| IEC TR 60269-5:2014 | Low-voltage fuses - Part 5: Guidance for the application of low-voltage fuses |
| ISO 15534-1:2000 | Ergonomic design for the safety of machinery — Part 1: Principles for determining the dimensions required for openings for whole-body access into machinery |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60947-5-2:2007+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 5-2: Control circuitdevices and switching elements - Proximity switches |
| IEC 60079-30-1:2007 | Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| CGA G 4.3 : 2015 | COMMODITY SPECIFICATION FOR OXYGEN |
| IEC 60335-2-73:2002+AMD1:2006+AMD2:2009 CSV | Household and similar electrical appliances - Safety - Part 2-73: Particular requirements for fixed immersion heaters |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60947-4-3:2014 | Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads |
| IEC 60947-6-1:2005+AMD1:2013 CSV | Low-voltage switchgear and controlgear - Part 6-1: Multiple functionequipment - Transfer switching equipment |
| IEC 61010-1:2010+AMD1:2016 CSV | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
| IEC 60439-3:1990+AMD1:1993+AMD2:2001 CSV | Low-voltage switchgear and controlgear assemblies - Part 3: Particular requirements for low-voltage switchgear and controlgear assemblies intended to be installed in places where unskilled persons have access for their use - Distribution boards |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 11119-3:2013 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450L with non-load-sharing metallic or non-metallic liners |
| CSA/ANSI Z83.8 : 2016 | GAS UNIT HEATERS, GAS PACKAGED HEATERS, GAS UTILITY HEATERS, AND GAS-FIRED DUCT FURNACES |
| IEC 60947-5-5:1997+AMD1:2005+AMD2:2016 CSV | Low-voltage switchgear and controlgear - Part 5-5: Control circuitdevices and switching elements - Electrical emergency stop device with mechanical latching function |
| IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| IEC 60335-2-41:2012 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| NSS 1740.15 : 0 | SAFETY STANDARD FOR OXYGEN AND OXYGEN SYSTEMS |
| ISO 4126-6:2014 | Safety devices for protection against excessive pressure — Part 6: Application, selection and installation of bursting disc safety devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.