ISO 2219:2010
Current
The latest, up-to-date edition.
Thermal insulation products for buildings — Factory-made products of expanded cork (ICB) — Specification
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
13-08-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 2219:2010 specifies the requirements for factory-made products of expanded cork, which are used for the thermal insulation of buildings. The products are made with granulated cork agglomerated without additional binders and are delivered as boards without facings.
ISO 2219:2010 describes product characteristics and includes procedures for testing, evaluation of conformity, marking, labelling and packaging.
Products covered in ISO 2219:2010 are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
ISO 2219:2010 does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.
Products with a declared thermal resistance lower than 0,25 m2×K/W, at 10 °C, or a declared thermal conductivity greater than 0,060 W/(m×K), at 10 °C, are not covered in ISO 2219:2010.
| Committee |
ISO/TC 87
|
| DevelopmentNote |
Supersedes ISO/DIS 2219. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 2219:2010 | Identical |
| NBN ISO 2219 : 1992 | Identical |
| UNE 15006:1975 | Identical |
| ISO 29471:2008 | Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity) |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| ISO 354:2003 | Acoustics — Measurement of sound absorption in a reverberation room |
| EN 1606:2013 | Thermal insulating products for building applications - Determination of compressive creep |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| ISO 29765:2008 | Thermal insulating products for building applications — Determination of tensile strength perpendicular to faces |
| ENV 1991-2-1 : DRAFT 1995 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - DENSITIES, SELF-WEIGHT AND IMPOSED LOADS |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| ISO 29472:2008 | Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| ISO 29767:2008 | Thermal insulating products for building applications Determination of short-term water absorption by partial immersion |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| ISO 2066:2004 | Resilient floor coverings — Determination of moisture content of agglomerated composition cork |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| EN 12090:2013 | Thermal insulating products for building applications - Determination of shear behaviour |
| ISO 29769:2008 | Thermal insulating products for building applications — Determination of behaviour under point load |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO 8301:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
| EN 13170:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| ISO 29468:2008 | Thermal insulating products for building applications — Determination of flatness |
| ISO 29467:2008 | Thermal insulating products for building applications — Determination of squareness |
| ISO 29764:2008 | Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 29465:2008 | Thermal insulating products for building applications — Determination of length and width |
| ISO 29466:2008 | Thermal insulating products for building applications — Determination of thickness |
| ISO 29770:2008 | Thermal insulating products for building applications — Determination of thickness for floating-floor insulating products |
| ISO 9052-1:1989 | Acoustics — Determination of dynamic stiffness — Part 1: Materials used under floating floors in dwellings |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| ISO 2191:1972 | Cork Expanded pure agglomerated Deformation under constant pressure |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| ISO 29470:2008 | Thermal insulating products for building applications Determination of the apparent density |
| ISO 633:2007 | Cork Vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.