ISO 2039-2:1987
Current
Current
The latest, up-to-date edition.
Plastics Determination of hardness Part 2: Rockwell hardness
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-07-1987
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifications of a method for the determination of the indentation hardness of plastics by means of the Rockwell hardness tester using the Rockwell M, L and R hardness scales. The Rockwell hardness number is derived from the net increase in depth of impression as the load on an indentor is increased from a fixed minor load to a major load and then returned to the same minor load. For materials having high creep and recovery, the time-factors involved in application of the major and minor loads have a considerable effect on the results of the measurements.
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| JIS K 7202-2:2001 | Identical |
| DIN EN ISO 2039-2:2000-01 | Identical |
| NF EN ISO 2039-2 : 1999 | Identical |
| UNE-EN ISO 2039-2:2000 | Identical |
| NBN EN ISO 2039-2 : 1ED 99 | Identical |
| NEN EN ISO 2039-2 : 1999 | Identical |
| NEN ISO 2039-2 : 1990 | Identical |
| NS EN ISO 2039-2 : 1ED 1999 | Identical |
| I.S. EN ISO 2039-2:1999 | Identical |
| PN EN ISO 2039-2 : 2002 | Identical |
| SN EN ISO 2039-2 : 1999 | Identical |
| UNI EN ISO 2039-2 : 2001 | Identical |
| SS-EN ISO 2039-2:1999 | Identical |
| BS EN ISO 2039-2:2000 | Identical |
| EN ISO 2039-2:1999 | Identical |
| BS 2782-3.365C(1992) : 1992 AMD 10694 | Identical |
| BS 2782-3 Method 365C:1986 | Identical |
| DIN EN 10245-5:2012-01 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| DD CLC/TS 50131-2-7-3:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (active) |
| DIN EN ISO 19712-2:2013-04 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| BS ISO 19712-3 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| BS ISO 20753 : 2008 | PLASTICS - TEST SPECIMENS |
| UNE-EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| PREN 845-1 : DRAFT 2012 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| IEC 60898-1:2015 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation |
| 98/202332 DC : DRAFT MAY 1998 | IEC 60670-1 - BOXES AND ENCLOSURES FOR ELECTRICAL ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50131-2-8:2016 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-8: INTRUSION DETECTORS - SHOCK DETECTORS |
| CEI EN 61995-1 : 2009 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| S.R. CLC/TS 50131-2-7-3:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-3: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACTIVE) |
| CEI EN 61095 : 2010 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CEI EN 61643-11 : 2014 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 20753 E : 2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| DIN EN ISO 20753:2014-07 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| I.S. EN ISO 7823-1:2003 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| DIN EN ISO 8257-2:2006-06 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| EN 10245-5:2011 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| EN 50131-2-8:2016 | Alarm systems - Intrusion and hold-up systems - Part 2-8: Intrusion detectors - Shock detectors |
| EN 50102:1995/corrigendum Jul. 2002 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE) |
| EN 60068-2-62 : 1995 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EF: IMPACT, PENDULUM METHOD |
| EN 60068-2-63 : 1994 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
| NF EN 60669-1 : 2000 AMD 2 2009 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN 10245-5:2011 | Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire |
| DD CLC/TS 50131-2-7-2:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (passive) |
| BS EN 50131-2-8:2016 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Shock detectors |
| 96/205308 DC : 0 | PREN 50245 - PLUGS AND SOCKET-OUTLETS 16A 250 V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 1 (3P + 2P) |
| IEC 62642-2-71:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-71: Intrusion detectors - Glass break detectors (acoustic) |
| BS ISO 19712-2 : 2007 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| 12/30265756 DC : 0 | BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| 06/30147348 DC : DRAFT MAR 2006 | ISO 19712-3 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| CEI 23-95 : 2010 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION INCORPORATED IN OR TO BE ASSOCIATED WITH FIXED SOCKET-OUTLETS (SRCBOS) |
| 96/205309 DC : 0 | PREN 50245 - PLUGS AND SOCKET-OUTLETS 16 A 250V A.C. FOR HOUSEHOLD AND SIMILAR PURPOSES - GENERAL REQUIREMENTS AND DIMENSIONS VARIANT 2 (3P) |
| ISO 20753:2008 | Plastics Test specimens |
| BS ISO 11040-4:2015 | Prefilled syringes Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| GOST R IEC 60269-3-1 : 2004 | LOW-VOLTAGE FUSES - PART 3-1 - SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY UNSKILLED PERSONS (FUSES MAINLY FOR HOUSEHOLD AND SIMILAR APPLICATIONS) - SECTIONS 1 TO 5 |
| BS ISO 8257-2:1990 | Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| S.R. CLC/TS 50131-2-7-1:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-1: INTRUSION DETECTORS - GLASS BREAK DETECTORS (ACOUSTIC) |
| SAE J 1875 : 2001 | MATERIALS FOR PLASTIC CHECK VALVES FOR VACUUM BOOSTER SYSTEMS |
| BS EN 60669-1 : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 50102:1997 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE) |
| I.S. EN 60898-1:2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD)) |
| ISO 19213:2017 | Implants for surgery — Test methods of material for use as a cortical bone model |
| I.S. EN ISO 19712-2:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS (ISO 19712-2:2007) |
| CLC/TS 50131-2-7-1:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-1: Intrusion detectors - Glass break detectors (acoustic) |
| UNI EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES |
| ASTM D 4000 : 2016 : REDLINE | Standard Classification System for Specifying Plastic Materials |
| IEC 62899-201:2016 | Printed electronics - Part 201: Materials - Substrates |
| ISO 7823-3:2007 | Plastics Poly(methyl methacrylate) sheets Types, dimensions and characteristics Part 3: Continuous cast sheets |
| BS EN ISO 7823-3:2007 | Plastics. Poly(methacrylate) sheets. Types, dimensions and characteristics Continuous cast sheets |
| 15/30326358 DC : 0 | BS EN 60898-3 - ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 3: CIRCUIT-BREAKERS FOR D.C. OPERATION |
| I.S. EN ISO 8257-2:2006 | PLASTICS - POLY(METHYL METHACRYLATE) (PMMA) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN ISO 14663-2:2006 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| I.S. EN 845-1:2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| I.S. EN ISO 7823-3:2007 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 3: CONTINUOUS CAST SHEETS |
| BS 3412:1992 | Methods of specifying general purpose polyethylene materials for moulding and extrusion |
| BS 4936:1987 | Method of specifying styrene-acrylonitrile (SAN) moulding and extrusion materials |
| BIS IS/IEC 60898-1 : 2002 | ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION |
| NBR IEC 60068-2-75 : 2007 | ENVIRONMENTAL TESTING - PART 2: TESTS - TEST EH: HAMMER TEST |
| BS 1493:1987 | Method of specifying general purpose polystyrene (PS) moulding and extrusion materials |
| VDI/VDE 2616 Blatt 2:2014-07 | Hardness testing of plastics and elastomers |
| BS EN ISO 19712-3:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Solid surface shapes |
| I.S. EN 61995-1:2008 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60068-2-62:1996 | Environmental testing. Test methods Test Ef. Impact, pendulum hammer |
| BS EN 60068-2-63:1995 | Environmental testing. Test methods Test Eq: Impact, spring hammer |
| 13/30273499 DC : 0 | BS ISO 11040-4 - PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING |
| 09/30210369 DC : DRAFT SEP 2009 | IEC 61643-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PERFORMANCE REQUIREMENTS AND TESTING METHODS |
| 06/30137509 DC : DRAFT MAR 2006 | ISO 19712-2 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| I.S. EN ISO 20753:2014 | PLASTICS - TEST SPECIMENS (ISO 20753:2008) |
| IEC 60669-1:2017 RLV | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| EN 61995-1:2008/A1:2017 | DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 61995-1:2005/A1:2016) |
| I.S. EN ISO 19712-3:2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| I.S. EN 61643-11:2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TESTS METHODS |
| I.S. EN 60068-2-75:2014 | ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS |
| SAE J 1568 : 2012 | MATERIALS FOR PLASTIC PISTONS FOR HYDRAULIC DISC BRAKE CYLINDERS |
| BS EN ISO 20753:2014 | Plastics. Test specimens |
| HD 62640:2015/A11:2016 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| ASTM D 785 : 2008 : R2015 | Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
| ASTM D 5857 : 2017 : REDLINE | Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology |
| IEC 60669-1:2017 | Switches for household and similar fixed-electrical installations - Part 1: General requirements |
| I.S. EN 60068-2-62:1996 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER |
| IEC 62642-2-72:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-72: Intrusion detectors - Glass break detectors (passive) |
| IEC 61643-1:2005 | Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| EN ISO 14663-2:2006 | Plastics - Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 14663-2:1999) |
| BS 3676-1(2000) : 2000 | SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| ONORM EN ISO 19712-3 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 3: DETERMINATION OF PROPERTIES - SOLID SURFACE SHAPES (ISO 19712-3:2007) |
| BS EN ISO 19712-2:2013 | Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods |
| UNI EN 10245-5 : 2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| S.R. CLC/TS 50131-2-7-2:2009 | ALARM SYSTEMS - INTRUSION AND HOLD-UP SYSTEMS - PART 2-7-2: INTRUSION DETECTORS - GLASS BREAK DETECTORS (PASSIVE) |
| 14/30304003 DC : 0 | BS EN 62899-1 ED.1 - PRINTED ELECTRONICS - MATERIALS - PART 1: SUBSTRATES |
| 07/30137506 DC : 0 | BS ISO 19712-1 - PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 1: CLASSIFICATION AND SPECIFICATIONS |
| 04/30123989 DC : DRAFT OCT 2004 | IEC 61643-11 - SURGE PROTECTION DEVICES CONNECTED TO LOW-VOLTAGE POWER DISTRIBUTION SYSTEMS - PART 11: PERFORMANCE REQUIREMENTS AND TESTING METHODS |
| DD CLC/TS 50131-2-7-1:2009 | Alarm systems. Intrusion and hold-up systems Intrusion detectors. Glass break detectors (acoustic) |
| BS ISO 14663-2 : 1999 AMD 16029 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| BS EN 60068-2-75:2014 | Environmental testing Tests. Test Eh: Hammer tests |
| BS 2011-2.1Ef:1992 | Environmental testing. Tests Test Ef. Impact, pendulum hammer |
| CLC/TS 50131-2-7-2:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-2: Intrusion detectors - Glass break detectors (passive) |
| BS EN 62094-1:2003 | Indicator light units for household and similar fixed-electrical installations General requirements |
| UTEC 61 610 : 2007 | ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS - REMOVABLE EARTHING BARS |
| 03/317673 DC : 0 | IEC 61995-1 - DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| 09/30200661 DC : 0 | BS EN 60669-1 ED 4.0 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS ISO 19213:2017 | Implants for surgery. Test methods of material for use as a cortical bone model |
| BS EN 61995-1:2008 | Devices for the connection of luminaires for household and similar purposes General requirements |
| BS IEC 62899-201 : 2016 | PRINTED ELECTRONICS - PART 201: MATERIALS - SUBSTRATES |
| UNI EN ISO 20753 : 2014 | PLASTICS - TEST SPECIMENS |
| NF EN 61095 : 2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| ISO 7823-2:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets |
| IEC 62642-2-73:2015 | Alarm systems - Intrusion and hold-up systems - Part 2-73: Intrusion detectors - Glass break detectors (active) |
| EN ISO 20753:2014 | Plastics - Test specimens (ISO 20753:2008) |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| I.S. EN 60068-2-63:1995 | ENVIRONMENTAL TESTING - PART 2: TEST METHODS - TEST EG: IMPACT, SPRING HAMMER |
| IEC 61995-1:2005+AMD1:2016 CSV | Devices for the connection of luminaires for household and similarpurposes - Part 1: General requirements |
| IEC 62640:2011+AMD1:2015 CSV | Residual current devices with or without overcurrent protection forsocket-outlets for household and similar uses |
| DIN EN ISO 7823-3:2007-08 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| DIN EN ISO 7823-2:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 2: EXTRUDED SHEETS |
| UNE-HD 62640:2016 | Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| ISO 4613-2:1995 | Plastics Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| 14/30272356 DC : 0 | BS EN 60669-1 - SWITCHES FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 7823-2:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Extruded sheets |
| ISO 8257-2:2001 | Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| ISO 7823-1:2003 | Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 1: Cast sheets |
| IEC 60068-2-63:1991 | Environmental testing - Part 2: Test methods - Test Eg: Impact, spring hammer. |
| BS EN ISO 7823-1:2003 | Plastics. Poly(methyl methacrylate) sheets. Types, dimensions and characteristics Cast sheets |
| BS EN ISO 8257-2:2006 | Plastics. Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Preparation of test specimens and determination of properties |
| IEC 62094-1:2002 | Indicator light units for household and similar fixed-electrical installations - Part 1: General requirements |
| BS EN 60898-1 : 2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION |
| IEC 61095:2009 | Electromechanical contactors for household and similar purposes |
| ISO 19712-3:2007 | Plastics Decorative solid surfacing materials Part 3: Determination of properties Solid surface shapes |
| ISO 19712-2:2007 | Plastics Decorative solid surfacing materials Part 2: Determination of properties Sheet goods |
| IEC 60884-1:2002+AMD1:2006+AMD2:2013 CSV | Plugs and socket-outlets for household and similar purposes - Part1: General requirements |
| BS EN ISO 14663-2:2006 | Plastics. Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| EN 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| EN ISO 8257-2:2006 | Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) |
| EN 845-1:2013+A1:2016 | Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets |
| EN ISO 19712-2:2013 | Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007) |
| EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| EN ISO 7823-1:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) |
| EN ISO 7823-2:2003 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) |
| PREN 50539-11 : DRAFT 2010 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| UNE-EN 10245-5:2012 | Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire |
| 10/30212123 DC : 0 | BS EN 845-1 - SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| 13/30280801 DC : 0 | BS EN 60068-2-75 - ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS |
| 15/30302738 DC : 0 | BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
| BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
| UNI EN ISO 19712-2 : 2013 | PLASTICS - DECORATIVE SOLID SURFACING MATERIALS - PART 2: DETERMINATION OF PROPERTIES - SHEET GOODS |
| DIN ISO 11040-4:2007-10 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| 10/30218152 DC : 0 | BS EN 50539-11 - LOW-VOLTAGE SURGE PROTECTIVE DEVICES - SURGE PROTECTIVE DEVICES FOR SPECIFIC APPLICATION INCLUDING D.C. - PART 11: REQUIREMENTS AND TESTS FOR SPDS IN PHOTOVOLTAIC APPLICATIONS |
| BS EN 61643-11 : 2012 | LOW-VOLTAGE SURGE PROTECTIVE DEVICES - PART 11: SURGE PROTECTIVE DEVICES CONNECTED TO LOW-VOLTAGE POWER SYSTEMS - REQUIREMENTS AND TEST METHODS |
| PRHD 62640 : DRAFT 2014 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| CEI 23-50 : 2007 | PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES GENERAL REQUIREMENTS |
| CEI 23-96 : 2010 | SOCKET-OUTLETS INTERLOCKED WITH A RESIDUAL CURRENT DEVICE WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (PID) |
| BS 3126:1987 | Method of specifying toughened polystyrene (SB) moulding and extrusion materials |
| EN ISO 7823-3:2007 | Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) |
| CSA E670 : 98(R2002) | GENERAL REQUIREMENTS FOR ENCLOSURES AND ACCESSORIES FOR HOUSEHOLD AND SIMILAR FIXED ELECTRICAL INSTALLATIONS |
| I.S. EN 10245-5:2011 | STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE |
| I.S. EN 61095:2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| UNE-EN ISO 19712-3:2013 | Plastics - Decorative solid surfacing materials - Part 3: Determination of properties - Solid surface shapes (ISO 19712-3:2007) |
| CLC/TS 50131-2-7-3:2009 | Alarm systems - Intrusion and hold-up systems - Part 2-7-3: Intrusion detectors - Glass break detectors (active) |
| ASTM D 785 : 2008 | Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials |
| UNE-EN 61995-1:2010 | Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements |
| I.S. HD 62640:2015 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES |
| UNE-EN ISO 20753:2015 | Plastics - Test specimens (ISO 20753:2008) |
| IEC 60669-2-1:2002+AMD1:2008+AMD2:2015 CSV | Switches for household and similar fixed electrical installations -Part 2-1: Particular requirements - Electronic switches |
| IEC 61643-11:2011 | Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods |
| I.S. EN 62094-1:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 7823-1:2003-12 | PLASTICS - POLY(METHYL METHACRYLATE) SHEETS - TYPES, DIMENSIONS AND CHARACTERISTICS - PART 1: CAST SHEETS |
| ISO 14663-2:1999 | Plastics Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials Part 2: Preparation of test specimens and determination of properties |
| DIN EN 50102 : 1997 AMD 1 1999 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE) |
| EN 62094-1:2003/A11:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| DIN EN ISO 14663-2:2006-06 | PLASTICS - ETHYLENE/VINYL ALCOHOL (EVOH) COPOLYMER MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
| VDE 0470-100 : 97 AMD 1 99 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES FOR ELECTRICAL EQUIPMENT AGAINST EXTERNAL MECHANICAL IMPACTS (IK CODE) |
| DIN ISO 11040-4:2017-07 | PREFILLED SYRINGES - PART 4: GLASS BARRELS FOR INJECTABLES AND STERILIZED SUBASSEMBLED SYRINGES READY FOR FILLING (ISO 11040-4:2015) |
| EN 61095:2009 | Electromechanical contactors for household and similar purposes |
| BS 4935:1989 | Method of specifying acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials |
| ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.