ISO 1811-2:1988
Current
Current
The latest, up-to-date edition.
Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
22-09-1988
Important note : All end users must be registered with an Account prior to user licenses being assigned.
The methods are applicable to the given materials in the form of wrought products (plate, sheet, strip, rod, bar, tube, profile, forgings, etc.) and castings (sand castings, chill castings, die castings, continuous castings, centrifugal castings).The methods are intended to determine compliance with the requirements for chemical composition. Together with ISO 1811-1 and 1811-3 this part of ISO 1811 cancels and replaces ISO Recommendation R 1811:1971, of which it constitutes a technical revision.
| Committee |
ISO/TC 26
|
| DevelopmentNote |
Supersedes ISO 1811 (04/2001)
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| PN ISO 1811-2 : 2001 | Identical |
| BS EN 15915:2010 | Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS) |
| NF EN 14938-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15703-2:2014 | Copper and copper alloys. Determination of manganese content Flame atomic absorption spectrometric method (FAAS) |
| UNI EN 16117-1 : 2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85% |
| 04/30114476 DC : DRAFT JUN 2004 | EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| 04/30114470 DC : DRAFT JUN 2004 | EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD |
| DIN EN 15022-4:2012-01 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| 07/30159086 DC : 0 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| DIN EN 15605:2010-12 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| UNI EN 15616 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30118518 DC : DRAFT AUG 2004 | EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| 07/30160477 DC : 0 | BS EN 15622 - COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| BS EN 15622:2010 | Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS) |
| UNI EN 13600 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| 04/30114464 DC : DRAFT JUN 2004 | EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| DIN EN 15616:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30118511 DC : DRAFT AUG 2004 | EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD |
| PREN 16117-2 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| 13/30288136 DC : 0 | BS EN 15703-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15690-2:2009 | Copper and copper alloys. Determination of iron content Flame atomic absorption spectrometric method (FAAS) |
| 16/30348268 DC : 0 | BS EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNE-EN 16117-1:2012 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| UNI EN 13601 : 2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| UNI EN 13605 : 2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN 15703-2:2014 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| UNE-EN 15616:2014 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
| NF EN 15605 : 2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| DIN EN 15024-2:2007-01 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNI EN 15915 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| NF EN 15915 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15025:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| EN 12167:2016 | Copper and copper alloys - Profiles and bars for general purposes |
| EN 12165:2016 | Copper and copper alloys - Wrought and unwrought forging stock |
| DIN EN 13605:2013-09 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| DIN EN 13599:2014-12 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| DIN EN 14936-1:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| DIN EN 13602:2013-09 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| DIN EN 13604:2013-09 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN 13600:2013 | Copper and copper alloys. Seamless copper tubes for electrical purposes |
| BS EN 14940-2:2006 | Copper and copper alloys. Determination of chromium content FAAS method |
| BS EN 12420:2014 | Copper and copper alloys. Forgings |
| I.S. EN 13601:2013 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| I.S. EN 13148:2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| DIN EN 15915:2010-12 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15656:2015 | Copper and copper alloys - Determination of phosphorus content - Spectrophotometric method |
| EN 12166:2016 | Copper and copper alloys - Wire for general purposes |
| DIN EN 14939:2006-09 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN 14938-2:2010 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 15023-3:2010 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15025:2006 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS) |
| EN 15022-4:2011 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| CEN/TS 15022-4:2006 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN 14941:2006-09 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| EN 13347:2002 | Copper and copper alloys - Rod and wire for welding and braze welding |
| EN 12451:2012 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| CEN/TS 15605:2007 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| DIN EN 15063-2:2007-01 | Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method |
| PREN 13605 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| NF CEN/TS 15605 : 2008 XP | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| DD CEN/TS 15022-4:2006 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometry method (FAAS) |
| DD CEN/TS 14940-1:2009 | Copper and copper alloys. Determination of chromium content Titrimetric method |
| 04/30114467 DC : DRAFT JUN 2004 | EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD |
| PREN 13601 : DRAFT 2011 | COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| DD CEN/TS 15022-2:2009 | Copper and copper alloys. Determination of tin content Spectrophotometric method |
| I.S. EN 16117-2:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| DIN EN 15916-2:2010-12 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| BS EN 16117-2:2012 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content higher than 99,80 % |
| 04/30118515 DC : DRAFT AUG 2004 | EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD |
| XP CEN/TS 15022-4 : 2007 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| I.S. CEN TS 14938-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| XP CEN/TS 15916-1 : 2011 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30114482 DC : DRAFT JUN 2004 | EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD |
| UNE-EN 15025:2011 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| 04/30118503 DC : DRAFT AUG 2004 | EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD |
| 04/30114488 DC : DRAFT JUN 2004 | EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD |
| UNI CEN/TS 15022-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 2: SPECTROPHOTOMETRIC METHOD |
| NF EN 15022-4 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| NF CEN/TS 14938-2 : 2007 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD |
| UNI EN 14938-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 12/30261889 DC : 0 | BS EN 12420 - COPPER AND COPPER ALLOYS - FORGINGS |
| DIN EN 15025:2010-12 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| BS EN 14938-2:2010 | Copper and copper alloys. Determination of bismuth content Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 16117-1:2011-12 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| BS EN 16117-1:2011 | Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content less than 99,85 % |
| UNI EN 15690-2 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 07/30161913 DC : 0 | EN 15656 - COPPER AND COPPER ALLOYS - DETERMINATION OF PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD |
| UNI EN 15023-3 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15022-4 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNI EN 15025 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 11/30239433 DC : 0 | BS EN 12449 - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| 04/30118507 DC : DRAFT AUG 2004 | EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD |
| 04/30114485 DC : DRAFT JUN 2004 | EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD |
| I.S. EN 15022-4:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 15690-2:2009-07 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| S.R. CEN/TS 15656:2015 | COPPER AND COPPER ALLOYS - DETERMINATION OF PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD |
| NF EN 15690-2 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15915:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 12449:2016 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| I.S. CEN TS 15022-4:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| XP CEN/TS 15023-3 : 2007 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| NF EN 15024-2 : 2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| EN 12164:2016 | Copper and copper alloys - Rod for free machining purposes |
| EN 12168:2016 | Copper and copper alloys - Hollow rod for free machining purposes |
| DIN EN 12167:2015-12 (Draft) | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 12168:2015-12 (Draft) | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12165:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| DIN EN 12164:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| DIN EN 12163:2015-12 (Draft) | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| BS EN 12450:2012 | Copper and copper alloys. Seamless, round copper capillary tubes |
| BS EN 13347:2002 | Copper and copper alloys. Rod and wire for welding and braze welding |
| BS EN 12163:2011 | Copper and copper alloys. Rod for general purposes |
| BS EN 1758:1998 | Copper and copper alloys. Strip for lead frames |
| DIN EN 15079:2015-07 | COPPER AND COPPER ALLOYS - ANALYSIS BY SPARK OPTICAL EMISSION SPECTROMETRY (S-OES) |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| BS EN 13148:2010 | Copper and copper alloys. Hot-dip tinned strip |
| BS EN 14937-2:2006 | Copper and copper alloys. Determination of antimony content FAAS method |
| BS EN 14941:2006 | Copper and copper alloys. Determination of cobalt content. FAAS method |
| I.S. EN 12450:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| I.S. EN 13600:2013 | COPPER AND COPPER ALLOYS - SEAMLESS COPPER TUBES FOR ELECTRICAL PURPOSES |
| I.S. EN 12166:2016 | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| DIN EN 13148:2010-12 | Copper and copper alloys - Hot-dip tinned strip |
| DIN EN 12450:2013-01 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| DIN EN 12451:2012-08 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| DIN EN 1172:2012-02 | Copper and copper alloys - Sheet and strip for building purposes |
| I.S. EN 13599:2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| I.S. EN 12167:2016 | COPPER AND COPPER ALLOYS - PROFILES AND BARS FOR GENERAL PURPOSES |
| DIN EN 12420:1999-03 | COPPER AND COPPER ALLOYS - FORGINGS |
| I.S. EN 13605:2013 | COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| I.S. EN 12452:2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| DIN EN 12452:2012-08 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| I.S. EN 1172:2011 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| I.S. EN 12168:2016 | COPPER AND COPPER ALLOYS - HOLLOW ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 15079:2015 | COPPER AND COPPER ALLOYS - ANALYSIS BY SOURCE OPTICAL EMISSION SPECTROMETRY (S-OES) |
| I.S. EN 13602:2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| I.S. EN 13347:2003 | COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING |
| I.S. EN 13604:2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| I.S. EN 12451:2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| I.S. EN 12165:2016 | COPPER AND COPPER ALLOYS - WROUGHT AND UNWROUGHT FORGING STOCK |
| I.S. EN 12164:2016 | COPPER AND COPPER ALLOYS - ROD FOR FREE MACHINING PURPOSES |
| I.S. EN 12420:2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| I.S. EN 12163:2016 | COPPER AND COPPER ALLOYS - ROD FOR GENERAL PURPOSES |
| 04/30123614 DC : DRAFT OCT 2004 | EN 15063-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 2: ROUTINE METHOD |
| UNI CEN/TS 15916-1 : 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15690-2:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 04/30114461 DC : DRAFT JUN 2004 | EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD |
| 04/30114473 DC : DRAFT JUN 2004 | EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD |
| 04/30114479 DC : DRAFT JUN 2004 | EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD |
| BS EN 15616:2012 | Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS) |
| UNI EN 15916-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DD CEN/TS 15703-1:2009 | Copper and copper alloys. Determination of manganese content Spectrophotometric method |
| 11/30240450 DC : 0 | BS EN 13347 - COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING |
| UNI EN 15622 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNE-EN 15690-2:2010 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| UNI EN 15605 : 2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| PD CEN/TS 15656:2015 | Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method |
| UNE-EN 15916-2:2011 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| UNE-CEN/TS 15916-1:2012 EX | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| S.R. CEN TS 15605:2007 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| DD CEN/TS 15025:2006 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS) |
| BS EN 15022-4:2011 | Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometric method (FAAS) |
| 07/30166049 DC : 0 | BS EN 15703-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| PREN 12451 : DRAFT 2010 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| UNE-EN 15915:2011 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| 11/30240456 DC : 0 | BS EN 13601 - COPPER AND COPPER ALLOYS - COPPER ROD, BAR AND WIRE FOR GENERAL ELECTRICAL PURPOSES |
| XP CEN/TS 15703-1 : 2009 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| CEN/TS 15703-1:2009 | Copper and copper alloys - Determination of manganese content - Part 1: Spectrophotometric method |
| XP CEN/TS 14940-1 : 2010 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| I.S. EN 15916-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. CEN TS 15025:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| I.S. CEN TS 15023-3:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNE-EN 14938-2:2012 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| PREN 12420 : DRAFT 2012 | COPPER AND COPPER ALLOYS - FORGINGS |
| NF CEN/TS 15025 : 2007 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| EN 12420:2014 | Copper and copper alloys - Forgings |
| EN 12163:2016 | Copper and copper alloys - Rod for general purposes |
| DIN EN 12420:2014-09 | COPPER AND COPPER ALLOYS - FORGINGS |
| DIN EN 15022-3:2006-12 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| DIN EN 12166:2015-12 (Draft) | COPPER AND COPPER ALLOYS - WIRE FOR GENERAL PURPOSES |
| BS EN 15024-2:2006 | Copper and copper alloys. Determination of zinc content Flame atomic absorption spectrometry method (FAAS) |
| BS EN 14436:2004 | Copper and copper alloys. Electrolytically tinned strip |
| BS EN 12168:1998 | Copper and copper alloys. Hollow rod for free machining purposes |
| BS EN 15063-2:2006 | Copper and copper alloys. Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) Routine method |
| UNE-EN 12450:2013 | Copper and copper alloys - Seamless, round copper capillary tubes |
| UNE-EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| EN 14937-1:2006 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| UNI EN 1172 : 2012 | COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
| UNI EN 13599 : 2014 | COPPER AND COPPER ALLOYS - COPPER PLATE, SHEET AND STRIP FOR ELECTRICAL PURPOSES |
| UNI EN 1654 : 1999 | COPPER AND COPPER ALLOYS - STRIP FOR SPRINGS AND CONNECTORS |
| UNI EN 1652 : 1999 | COPPER AND COPPER ALLOYS - PLATE, SHEET, STRIP AND CIRCLES FOR GENERAL PURPOSES |
| UNI EN 12451 : 2012 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| UNI EN 12420 : 2014 | COPPER AND COPPER ALLOYS - FORGINGS |
| UNI EN 12450 : 2013 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER CAPILLARY TUBES |
| UNI EN 12452 : 2012 | COPPER AND COPPER ALLOYS - ROLLED, FINNED, SEAMLESS TUBES FOR HEAT EXCHANGERS |
| UNI EN 13602 : 2013 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| UNI EN 13148 : 2010 | COPPER AND COPPER ALLOYS - HOT-DIP TINNED STRIP |
| UNI EN 13604 : 2013 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| NF EN 15023-3 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15605:2010 | Copper and copper alloys. Inductively coupled plasma optical emission spectrometry |
| 11/30240465 DC : 0 | BS EN 13604 - COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| UNI CEN/TS 15616 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 11/30240468 DC : 0 | BS EN 13605 - COPPER AND COPPER ALLOYS - COPPER PROFILES AND PROFILED WIRE FOR ELECTRICAL PURPOSES |
| UNI EN 16117-2 : 2013 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| DD CEN/TS 14938-2:2006 | Copper and copper alloys. Determination of bismuth content FAAS method |
| DIN EN 15622:2010-06 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| 11/30240459 DC : 0 | BS EN 13602 - COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| NF EN 15916-2 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 12449:2015-11 (Draft) | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| 11/30244575 DC : 0 | BS EN 16117-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| UNE-CEN/TS 15022-2:2011 EX | Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method |
| S.R. CEN TS 15022-2:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 2: SPECTROPHOTOMETRIC METHOD |
| BS EN 15025:2010 | Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS) |
| PREN 13604 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEMICONDUCTOR DEVICES, ELECTRONIC AND VACUUM PRODUCTS MADE FROM HIGH CONDUCTIVITY COPPER |
| DD CEN/TS 15616:2009 | Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS) |
| 10/30229550 DC : 0 | BS EN 12451 REV - COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR HEAT EXCHANGERS |
| DD CEN/TS 15656:2009 | Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method |
| UNI CEN/TS 14940-1 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| EN 12449:2016 | Copper and copper alloys - Seamless, round tubes for general purposes |
| PREN 15024-2 : DRAFT 2016 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| XP CEN/TS 15022-2 : 2010 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 2: SPECTROPHOTOMETRIC METHOD |
| UNE-EN 15605:2011 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| S.R. CEN TS 14940-1:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| I.S. EN 16117-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 1: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT LESS THAN 99,85% |
| PREN 12449 : DRAFT 2011 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES |
| ISO 4739:1985 | Wrought copper and copper alloy products — Selection and preparation of specimens and test pieces for mechanical testing |
| I.S. EN 15605:2010 | COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY |
| S.R. CEN TS 15916-1:2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| I.S. EN 15024-2:2006 | COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNE-EN 1172:2012 | Copper and copper alloys - Sheet and strip for building purposes |
| BS EN 13605:2013 | Copper and copper alloys. Copper profiles and profiled wire for electrical purposes |
| BS EN 12165:2011 | Copper and copper alloys. Wrought and unwrought forging stock |
| UNE-EN 13602:2014 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| UNE-EN 12452:2013 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| BS EN 14942-2:2006 | Copper and copper alloys. Determination of arsenic content FAAS method |
| UNE-EN 13601:2014 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| BS EN 12451:2012 | Copper and copper alloys. Seamless, round tubes for heat exchangers |
| UNE-EN 13148:2012 | Copper and copper alloys - Hot-dip tinned strip |
| UNE-EN 12451:2013 | Copper and copper alloys - Seamless, round tubes for heat exchangers |
| UNE-EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
| BS EN 15022-3:2006 | Copper and copper alloys. Determination of tin content Low tin content. Flame atomic absorption spectrometry method (FAAS) |
| UNE-EN 13600:2014 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| BS EN 14937-1:2006 | Copper and copper alloys. Determination of antimony content Spectrophotometric method |
| UNE-EN 12420:2015 | Copper and copper alloys - Forgings |
| BS EN 13599:2014 | Copper and copper alloys. Copper plate, sheet and strip for electrical purposes |
| BS EN 13601:2013 | Copper and copper alloys. Copper rod, bar and wire for general electrical purposes |
| BS EN 12452:2012 | Copper and copper alloys. Rolled, finned, seamless tubes for heat exchangers |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS EN 13602:2013 | Copper and copper alloys. Drawn, round copper wire for the manufacture of electrical conductors |
| BS EN 14939:2006 | Copper and copper alloys. Determination of beryllium content. FAAS Method |
| BS EN 12166:2011 | Copper and copper alloys. Wire for general purposes |
| BS EN 12164:2011 | Copper and copper alloys. Rod for free machining purposes |
| BS EN 13604:2013 | Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| BS EN 1654:1998 | Copper and copper alloys. Strip for springs and connectors |
| EN 15915:2010 | Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS) |
| EN 15690-2:2009 | Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 15063-2:2006 | Copper and copper alloys - Determination of main constituents and impurities by wavelength dispersive X-ray fluorescence spectrometry (XRF) - Part 2: Routine method |
| EN 14937-2:2006 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN 15022-3:2006 | Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS) |
| EN 1758:1997 | Copper and copper alloys - Strip for lead frames |
| EN 14939:2006 | Copper and copper alloys - Determination of beryllium content - FAAS method |
| EN 16117-1:2011 | Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 % |
| EN 15079:2015 | Copper and copper alloys - Analysis by spark optical emission spectrometry (S-OES) |
| EN 15703-2:2014 | Copper and copper alloys - Determination of manganese content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| EN 14936-2:2006 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| EN 13604:2013 | Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper |
| EN 14941:2006 | Copper and copper alloys - Determination of cobalt content - FAAS method |
| EN 15916-2:2010 | Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 14936-1:2006 | Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method |
| EN 14436:2004 | Copper and copper alloys - Electrolytically tinned strip |
| EN 14935:2006 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| EN 14942-2:2006 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| EN 14940-2:2006 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| EN 15622:2010 | Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN 15023-3:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 14938-2:2010-12 | Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| PREN 13347 : DRAFT 2011 | COPPER AND COPPER ALLOYS - ROD AND WIRE FOR WELDING AND BRAZE WELDING |
| S.R. CEN TS 15616:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DD CEN/TS 15916-1:2011 | Copper and copper alloys. Determination of tellurium content Low tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 15023-3:2010-12 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| NF EN 15622 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| 07/30163034 DC : 0 | BS EN 14940-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD |
| DIN EN 16117-2:2013-02 | COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80% |
| DIN EN 15703-2:2015-03 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| NF EN 15025 : 2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| XP CEN/TS 15616 : 2009 XP | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15023-3:2010 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometric method (FAAS) |
| DD CEN/TS 15023-3:2006 | Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometry method (FAAS) |
| UNE-EN 15023-3:2011 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS) |
| 11/30244578 DC : DRAFT JUNE 2011 | BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| BS EN 15916-2:2010 | Copper and copper alloys. Determination of tellurium content Medium tellurium content. Flame atomic absorption spectrometric method (FAAS) |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| 07/30163942 DC : 0 | BS EN 15690-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS) |
| UNI CEN/TS 15703-1 : 2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| PREN 13602 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DRAWN, ROUND COPPER WIRE FOR THE MANUFACTURE OF ELECTRICAL CONDUCTORS |
| I.S. EN 15622:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| PREN 15616 : DRAFT 2011 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| UNE-EN 15022-4:2012 | Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN 15616:2012 | COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| S.R. CEN TS 15703-1:2009 | COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD |
| EN 15024-2:2018 | Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS) |
| I.S. EN 14938-2:2010 | COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS) |
| DIN EN 13601:2013-09 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| DIN EN 14936-2:2006-09 | Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method |
| DIN EN 14937-1:2006-09 | Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method |
| DIN EN 14937-2:2006-09 | Copper and copper alloys - Determination of antimony content - Part 2: FAAS method |
| DIN EN 14940-2:2006-09 | Copper and copper alloys - Determination of chromium content - Part 2: FAAS method |
| DIN EN 14942-2:2006-09 | Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method |
| DIN EN 13600:2013-09 | Copper and copper alloys - Seamless copper tubes for electrical purposes; German version EN 13600:2013 |
| BS EN 14936-2:2006 | Copper and copper alloys. Determination of aluminium content FAAS method |
| BS EN 14935:2006 | Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method |
| BS EN 1653:1998 | Copper and copper alloys. Plate, sheet and circles for boilers, pressure vessels and hot water storage units |
| BS EN 14936-1:2006 | Copper and copper alloys. Determination of aluminium content Titrimetric method |
| BS EN 15079:2015 | Copper and copper alloys. Analysis by spark optical emission spectrometry (S-OES) |
| CEN/TS 15916-1:2011 | Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 13148:2010 | Copper and copper alloys - Hot-dip tinned strip |
| CEN/TS 15023-3:2006 | Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS) |
| CEN/TS 14938-2:2006 | Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method |
| EN 12450:2012 | Copper and copper alloys - Seamless, round copper capillary tubes |
| EN 1172:2011 | Copper and copper alloys - Sheet and strip for building purposes |
| EN 12452:2012 | Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangers |
| CEN/TS 15616:2009 | Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS) |
| EN 15025:2010 | Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS) |
| DIN EN 14436:2004-11 | Copper and copper alloys - Electrolytically tinned strip |
| DIN EN 14935:2006-09 | Copper and copper alloys - Determination of impurities in pure copper - ET AAS method |
| CEN/TS 15022-2:2009 | Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method |
| EN 15605:2010 | Copper and copper alloys - Inductively coupled plasma optical emission spectrometry |
| CEN/TS 14940-1:2009 | Copper and copper alloys - Determination of chromium content - Part 1: Titrimetric method |
| ISO 197-1:1983 | Copper and copper alloys — Terms and definitions — Part 1: Materials |
| ISO 1811-1:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 1: Sampling of cast unwrought products |
| ISO 197-3:1983 | Copper and copper alloys — Terms and definitions — Part 3: Wrought products |
| ISO 197-4:1983 | Copper and copper alloys — Terms and definitions — Part 4: Castings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.