ISO 1708:1989
Current
Current
The latest, up-to-date edition.
Acceptance conditions for general purpose parallel lathes Testing of the accuracy
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
19-10-1989
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies both geometrical and practical tests on these parallel lathes, and gives the corresponding permissible dviations which apply. It deals only with verification of the accuracy of the machine. It does not apply tothe testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (speeds, feeds, etc.), which shall generally be checked before the accuracy is tested. This fourth edition cancels and replaces the third edition (ISO 1708: 1983).
| DocumentType |
Standard
|
| Pages |
13
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-ISO 1708:2012 | Identical |
| PN M-55651 : 1994 | Identical |
| UNE 15318:1990 | Identical |
| NF ISO 1708 : 1997 | Identical |
| UNI ISO 1708 : 2010 | Identical |
| NEN ISO 1708 : 1997 | Identical |
| IS 10190 : 2018 | Identical |
| NS 5654 : 1ED 1980 | Identical |
| NS 5655 : 1ED 1980 | Identical |
| SNV ISO 1708 : 1989 | Identical |
| PNE 15318 | Identical |
| NFE 60 101 : 1979 | Similar to |
| BS ISO 13041-2:2008 | Test conditions for numerically controlled turning machines and turning centres Geometric tests for machines with a vertical workholding spindle |
| BS ISO 13041-7:2004 | Test conditions for numerically controlled turning machines and turning centres Evaluation of contouring performance in the coordinate planes |
| ISO 13041-1:2004 | Test conditions for numerically controlled turning machines and turning centres Part 1: Geometric tests for machines with a horizontal workholding spindle |
| UNI ISO 13041-7 : 2010 | TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 7: EVALUATION OF CONTOURING PERFORMANCE IN THE COORDINATE PLANES |
| UNE-ISO 13041-3:2011 | Test conditions for numerically controlled turning machines and turning centres -- Part 3: Geometric tests for machines with inverted vertical workholding spindles |
| 15/30281521 DC : 0 | BS ISO 13041-2 - TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 2: GEOMETRIC TESTS FOR MACHINES WITH A VERTICAL WORKHOLDING SPINDLE |
| UNI ISO 8956 : 2009 | ACCEPTANCE CONDITIONS FOR COPYING ATTACHMENTS, INTEGRAL OR OTHERWISE, FOR LATHES - TESTING OF THE ACCURACY |
| UNI ISO 13041-3 : 2010 | TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 3: GEOMETRIC TESTS FOR MACHINES WITH INVERTED VERTICAL WORKHOLDING SPINDLES |
| ISO 13041-7:2004 | Test conditions for numerically controlled turning machines and turning centres — Part 7: Evaluation of contouring performance in the coordinate planes |
| UNI ISO 13041-4 : 2010 | TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 4: ACCURACY AND REPEATABILITY OF POSITIONING OF LINEAR AND ROTARY AXES |
| 18/30325145 DC : 0 | BS ISO 13041-1 - TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 1: GEOMETRIC TESTS FOR MACHINES WITH A HORIZONTAL WORKHOLDING SPINDLE |
| BS 308-3:1972 | Engineering drawing practice. Geometrical tolerancing |
| A-A-59334 Base Document:1999 | Lathe, Engine (Standard) and Toolroom (Precision), Horizontal Spindle |
| ISO 13041-2:2008 | Test conditions for numerically controlled turning machines and turning centres Part 2: Geometric tests for machines with a vertical workholding spindle |
| UNE-ISO 13041-2:2011 | Test conditions for numerically controlled turning machines and turning centres -- Part 2: Geometric tests for machines with a vertical workholding spindle |
| UNI ISO 13041-2 : 2010 | TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 2: GEOMETRIC TESTS FOR MACHINES WITH A VERTICAL WORKHOLDING SPINDLE |
| BS ISO 13041-4:2004 | Test conditions for numerically controlled turning machines and turning centres Accuracy and repeatability of positioning of linear and rotary axes |
| BS ISO 13041-3:2009 | Test conditions for numerically controlled turning machines and turning centres Geometric tests for machines with inverted vertical workholding spindles |
| 04/30112991 DC : 0 | ISO 13041-2 - TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 2: GEOMETRIC TESTS FOR MACHINES WITH A VERTICAL WORKHOLDING SPINDLE |
| ISO 13041-3:2009 | Test conditions for numerically controlled turning machines and turning centres Part 3: Geometric tests for machines with inverted vertical workholding spindles |
| BS ISO 13041-1:2004 | Test conditions for numeriaclly controlled turning machines and turning centres Geometric tests for machines with a horizontal workholding spindle |
| ISO 13041-4:2004 | Test conditions for numerically controlled turning machines and turning centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes |
| UNI ISO 13041-1 : 2010 | TEST CONDITIONS FOR NUMERICALLY CONTROLLED TURNING MACHINES AND TURNING CENTRES - PART 1: GEOMETRIC TESTS FOR MACHINES WITH A HORIZONTAL WORKHOLDING SPINDLE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.