ISO 16828:2012
Current
The latest, up-to-date edition.
Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
23-03-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 16828:2012 defines the general principles for the application of the time-of-flight diffraction (TOFD) technique for both detection and sizing of discontinuities in low alloyed carbon steel components. It can also be used for other types of materials, provided the application of the TOFD technique is performed with necessary consideration of geometry, acoustical properties of the materials, and the sensitivity of the examination.
Although it is applicable, in general terms, to discontinuities in materials and applications covered by ISO 16810, it contains references to the application on welds. This approach has been chosen for reasons of clarity as to the ultrasonic probe positions and directions of scanning.
Unless otherwise specified in the referencing documents, the minimum requirements of ISO 16828:2012 are applicable.
Unless explicitly stated otherwise, ISO 16828:2012 is applicable to the following product classes as defined in ISO 16811: a) class 1, without restrictions; b) classes 2 and 3, restrictions apply as stated in Clause 9.
The inspection of products of classes 4 and 5 requires special procedures. These are also addressed in Clause 9.
Techniques for the use of TOFD for weld inspection are described in ISO 10863.
The related acceptance criteria are given in ISO 15626.
| DevelopmentNote |
Supersedes ISO/DIS 16828. (03/2012)
|
| DocumentType |
Standard
|
| Pages |
19
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 16828 : 2014 | Identical |
| NBN EN ISO 16828 : 2014 | Identical |
| NEN EN ISO 16828 : 2014 | Identical |
| NS EN ISO 16828 : 2014 | Identical |
| I.S. EN ISO 16828:2014 | Identical |
| PN EN ISO 16828 : 2014 | Identical |
| SN EN ISO 16828:2014 | Identical |
| UNI EN ISO 16828 : 2014 | Identical |
| SS-EN ISO 16828:2014 | Identical |
| UNE-EN ISO 16828:2014 | Identical |
| BS EN ISO 16828:2014 | Identical |
| EN ISO 16828:2014 | Identical |
| DIN EN ISO 16828:2014-06 | Identical |
| DIN EN ISO 16828 E : 2014 | Identical |
| DIN EN ISO 16827:2014-06 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| 15/30317351 DC : 0 | BS EN 13480-8:2012/A2 - METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| DIN EN ISO 17635:2015-08 (Draft) | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| DIN EN ISO 16811:2014-06 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| UNI EN ISO 16827 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES |
| BS EN 13480-8:2017 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| BS EN 13480-8:2017+A1:2019 | Metallic industrial piping Additional requirements for aluminium and aluminium alloy piping |
| EN ISO 5577:2017 | Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) |
| DIN EN ISO 17635:2017-04 | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| EN ISO 17635:2016 | Non-destructive testing of welds - General rules for metallic materials (ISO 17635:2016) |
| DIN EN ISO 5577 E : 2017 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - VOCABULARY (ISO 5577:2017) |
| UNE-EN ISO 16827:2014 | Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012) |
| 15/30303377 DC : 0 | BS EN ISO 17635 - NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS - COMPLEMENTARY ELEMENT |
| BS EN ISO 5577:2017 | Non-destructive testing. Ultrasonic testing. Vocabulary |
| BS EN ISO 17635:2016 | Non-destructive testing of welds. General rules for metallic materials |
| DIN EN ISO 16827 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| UNE-EN ISO 5577:2017 | Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) |
| I.S. EN ISO 5577:2017 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - VOCABULARY (ISO 5577:2017) |
| UNE-EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping (Endorsed by Asociación Española de Normalización in September of 2019.) |
| I.S. EN 13480-8:2017&LC:2019 | METALLIC INDUSTRIAL PIPING - PART 8: ADDITIONAL REQUIREMENTS FOR ALUMINIUM AND ALUMINIUM ALLOY PIPING |
| DIN EN ISO 16811 E : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| I.S. EN ISO 16811:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING (ISO 16811:2012) |
| DIN EN ISO 5577:2015-06 (Draft) | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - VOCABULARY (ISO 5577:2017) |
| ISO 16811:2012 | Non-destructive testing — Ultrasonic testing — Sensitivity and range setting |
| I.S. EN ISO 16827:2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - CHARACTERIZATION AND SIZING OF DISCONTINUITIES (ISO 16827:2012) |
| BS EN ISO 16811:2014 | Non-destructive testing. Ultrasonic testing. Sensitivity and range setting |
| I.S. EN ISO 17635:2016 | NON-DESTRUCTIVE TESTING OF WELDS - GENERAL RULES FOR METALLIC MATERIALS (ISO 17635:2016) |
| UNE-EN ISO 16811:2014 | Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012) |
| ISO 16827:2012 | Non-destructive testing — Ultrasonic testing — Characterization and sizing of discontinuities |
| ISO 17635:2016 | Non-destructive testing of welds — General rules for metallic materials |
| ISO 5577:2017 | Non-destructive testing — Ultrasonic testing — Vocabulary |
| EN ISO 16811:2014 | Non-destructive testing - Ultrasonic testing - Sensitivity and range setting (ISO 16811:2012) |
| EN ISO 16827:2014 | Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2012) |
| EN 13480-8:2017 | Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping |
| BS EN ISO 16827:2014 | Non-destructive testing. Ultrasonic testing. Characterization and sizing of discontinuities |
| UNI EN ISO 16811 : 2014 | NON-DESTRUCTIVE TESTING - ULTRASONIC TESTING - SENSITIVITY AND RANGE SETTING |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| ISO 15626:2011 | Non-destructive testing of welds Time-of-flight diffraction technique (TOFD) Acceptance levels |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| ISO 10863:2011 | Non-destructive testing of welds Ultrasonic testing Use of time-of-flight diffraction technique (TOFD) |
| ISO 16810:2012 | Non-destructive testing — Ultrasonic testing — General principles |
| ISO 16811:2012 | Non-destructive testing — Ultrasonic testing — Sensitivity and range setting |
| EN 12668-3:2013 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.