ISO 16432:2006
Current
Current
The latest, up-to-date edition.
Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
03-02-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 16432:2006 specifies requirements for embossed-resistance-projection welding in the fabrication of assemblies of uncoated and metallic coated low carbon steel comprising two thicknesses of metal, where the maximum single sheet thickness of components to be welded is within the range 0,4 mm to 3 mm for the following materials:
- uncoated steels;
- hot-dip zinc or iron-zinc alloy (galvannealed) coated steel;
- electrolytic zinc, zinc-iron, or zinc-nickel coated steel;
- aluminium coated steel;
- zinc-aluminium coated steel.
Organic coated or primer coated steels are not covered by ISO 16432:2006.
| DevelopmentNote |
Supersedes ISO/DIS 16432 (02/2006)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN ISO 16432:2008 | Identical |
| NBN EN ISO 16432 : 2007 | Identical |
| NEN ISO 16432 : 2006 | Identical |
| NEN EN ISO 16432 : 2007 | Identical |
| NS EN ISO 16432 : 1ED 2007 | Identical |
| I.S. EN ISO 16432:2007 | Identical |
| SN EN ISO 16432 : 2007 | Identical |
| UNI EN ISO 16432 : 2008 | Identical |
| BS ISO 16432 : 2006 AMD 17294 | Identical |
| BS EN ISO 16432:2007 | Identical |
| EN ISO 16432:2007 | Identical |
| NF EN ISO 16432 : 2007 | Identical |
| DIN EN ISO 16432:2007-09 | Identical |
| DIN EN ISO 18278-1:2015-08 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 13/30284265 DC : 0 | BS EN ISO 18278-1 - RESISTANCE WELDING - WELDABILITY - PART 1: ASSESSMENT OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN ISO 18278-1:2015 | RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015) |
| ONORM EN ISO 18278-1 : JUL 2015 | RESISTANCE WELDING - WELDABILITY - PART 1: GENERAL REQUIREMENTS FOR THE EVALUATION OF WELDABILITY FOR RESISTANCE SPOT, SEAM AND PROJECTION WELDING OF METALLIC MATERIALS (ISO 18278-1:2015) |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 18278-1:2015 | Resistance welding Weldability Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| BS EN ISO 18278-1:2015 | Resistance welding. Weldability General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials |
| EN ISO 18278-1:2015 | Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2015) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 5182:2016 | Resistance welding Materials for electrodes and ancillary equipment |
| ISO 14270:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds |
| ISO 10447:2015 | Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
| ISO 3574:2012 | Cold-reduced carbon steel sheet of commercial and drawing qualities |
| ISO 14272:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds |
| ISO 14273:2016 | Resistance welding Destructive testing of welds Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds |
| ISO 3573:2012 | Hot-rolled carbon steel sheet of commercial and drawing qualities |
| ISO 9364:2011 | Continuous hot-dip 55 % aluminium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities |
| ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| ISO 5002:2013 | Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities |
| ISO 17653:2012 | Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds |
| ISO 15614-12:2014 | Specification and qualification of welding procedures for metallic materials Welding procedure test Part 12: Spot, seam and projection welding |
| ISO 669:2016 | Resistance welding Resistance welding equipment Mechanical and electrical requirements |
| ISO 8167:1989 | Projections for resistance welding |
| ISO 14329:2003 | Resistance welding Destructive tests of welds Failure types and geometric measurements for resistance spot, seam and projection welds |
| ISO 15609-5:2011 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
| ISO 3575:2016 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of commercial and drawing qualities |
| ISO 4950-2:1995 | High yield strength flat steel products — Part 2: Products supplied in the normalized or controlled rolled condition |
| ISO 4950-1:1995 | High yield strength flat steel products — Part 1: General requirements |
| ISO 5000:2011 | Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.